Message ID | 95025e8826bdf7784b9e8c922c6c1b59b9f21d5d.1529328522.git.baruch@tkos.co.il |
---|---|
State | Awaiting Upstream |
Delegated to: | Stefan Roese |
Headers | show |
Series | mvebu: allow selection of boot device | expand |
Hi Baruch, this patch needs to be rebased on git master as it does not apply. Thanks Dennis El lun, 18-06-2018 a las 21:56 +0300, Baruch Siach escribió: > Move the gdsys Controlcenter DC specific build time kwbimage.cfg > generation code into the mach-mvebu/ directory to be shared by all > 32bit > mvebu platforms. > > Remove board specific kwbimage.cfg files, and use the generated one > instead. These files are all identical, with two exceptions. Clearfog > and Helios4 use the sdio boot device, whereas all others use spi. > Update > the defconfigs for the exceptional boards to generate the same > kwbimage.cfg as before. > > Signed-off-by: Baruch Siach <baruch@tkos.co.il> > --- > .../a38x => arch/arm/mach-mvebu}/.gitignore | 0 > arch/arm/mach-mvebu/Makefile | 30 > ++++++++++++++++++ > arch/arm/mach-mvebu/include/mach/config.h | 4 +-- > .../arm/mach-mvebu}/kwbimage.cfg.in | 0 > board/CZ.NIC/turris_omnia/kwbimage.cfg | 12 ------- > board/Marvell/db-88f6720/kwbimage.cfg | 12 ------- > board/Marvell/db-88f6820-amc/kwbimage.cfg | 12 ------- > board/Marvell/db-88f6820-gp/kwbimage.cfg | 12 ------- > board/Marvell/db-mv784mp-gp/kwbimage.cfg | 12 ------- > board/Synology/ds414/kwbimage.cfg | 12 ------- > board/gdsys/a38x/Makefile | 31 --------------- > ---- > board/kobol/helios4/kwbimage.cfg | 13 -------- > board/maxbcm/kwbimage.cfg | 12 ------- > board/solidrun/clearfog/kwbimage.cfg | 12 ------- > board/theadorable/kwbimage.cfg | 12 ------- > configs/clearfog_defconfig | 2 +- > configs/helios4_defconfig | 2 +- > 17 files changed, 34 insertions(+), 156 deletions(-) > rename {board/gdsys/a38x => arch/arm/mach-mvebu}/.gitignore (100%) > rename {board/gdsys/a38x => arch/arm/mach-mvebu}/kwbimage.cfg.in > (100%) > delete mode 100644 board/CZ.NIC/turris_omnia/kwbimage.cfg > delete mode 100644 board/Marvell/db-88f6720/kwbimage.cfg > delete mode 100644 board/Marvell/db-88f6820-amc/kwbimage.cfg > delete mode 100644 board/Marvell/db-88f6820-gp/kwbimage.cfg > delete mode 100644 board/Marvell/db-mv784mp-gp/kwbimage.cfg > delete mode 100644 board/Synology/ds414/kwbimage.cfg > delete mode 100644 board/kobol/helios4/kwbimage.cfg > delete mode 100644 board/maxbcm/kwbimage.cfg > delete mode 100644 board/solidrun/clearfog/kwbimage.cfg > delete mode 100644 board/theadorable/kwbimage.cfg > > diff --git a/board/gdsys/a38x/.gitignore b/arch/arm/mach- > mvebu/.gitignore > similarity index 100% > rename from board/gdsys/a38x/.gitignore > rename to arch/arm/mach-mvebu/.gitignore > diff --git a/arch/arm/mach-mvebu/Makefile b/arch/arm/mach- > mvebu/Makefile > index ade7b870646f..d907fac3752d 100644 > --- a/arch/arm/mach-mvebu/Makefile > +++ b/arch/arm/mach-mvebu/Makefile > @@ -25,6 +25,36 @@ obj-$(CONFIG_ARMADA_375) += > ../../../drivers/ddr/marvell/axp/xor.o > obj-$(CONFIG_ARMADA_38X) += ../../../drivers/ddr/marvell/a38x/xor.o > obj-$(CONFIG_ARMADA_XP) += ../../../drivers/ddr/marvell/axp/xor.o > obj-$(CONFIG_MVEBU_EFUSE) += efuse.o > + > +extra-y += kwbimage.cfg > + > +KWB_REPLACE += BOOT_FROM > +ifneq ($(CONFIG_MVEBU_SPL_BOOT_DEVICE_SPI),) > + KWB_CFG_BOOT_FROM=spi > +endif > +ifneq ($(CONFIG_MVEBU_SPL_BOOT_DEVICE_MMC),) > + KWB_CFG_BOOT_FROM=sdio > +endif > + > +ifneq ($(CONFIG_SECURED_MODE_IMAGE),) > +KWB_REPLACE += CSK_INDEX > +KWB_CFG_CSK_INDEX = $(CONFIG_SECURED_MODE_CSK_INDEX) > + > +KWB_REPLACE += SEC_BOOT_DEV > +KWB_CFG_SEC_BOOT_DEV=$(patsubst "%",%, \ > + $(if $(findstring > BOOT_SPI_NOR_FLASH,$(CONFIG_SPL_BOOT_DEVICE)),0x34) \ > + $(if $(findstring > BOOT_SDIO_MMC_CARD,$(CONFIG_SPL_BOOT_DEVICE)),0x31) \ > + ) > + > +KWB_REPLACE += SEC_FUSE_DUMP > +KWB_CFG_SEC_FUSE_DUMP = a38x > +endif > + > +$(src)/kwbimage.cfg: $(src)/kwbimage.cfg.in include/autoconf.mk \ > + include/config/auto.conf > + $(Q)sed -ne '$(foreach V,$(KWB_REPLACE),s/^#@$(V)/$(V) > $(KWB_CFG_$(V))/;)p' \ > + <$< >$(dir $<)$(@F) > + > endif # CONFIG_SPL_BUILD > obj-y += gpio.o > obj-y += mbus.o > diff --git a/arch/arm/mach-mvebu/include/mach/config.h > b/arch/arm/mach-mvebu/include/mach/config.h > index 2acfd3314a68..9f51411e43f1 100644 > --- a/arch/arm/mach-mvebu/include/mach/config.h > +++ b/arch/arm/mach-mvebu/include/mach/config.h > @@ -32,12 +32,12 @@ > #endif > > /* > - * By default kwbimage.cfg from board specific folder is used > + * By default the generated mvebu kwbimage.cfg is used > * If for some board, different configuration file need to be used, > * CONFIG_SYS_KWD_CONFIG should be defined in board specific header > file > */ > #ifndef CONFIG_SYS_KWD_CONFIG > -#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage.c > fg > +#define CONFIG_SYS_KWD_CONFIG arch/arm/mach- > mvebu/kwbimage.cfg > #endif /* CONFIG_SYS_KWD_CONFIG */ > > /* Add target to build it automatically upon "make" */ > diff --git a/board/gdsys/a38x/kwbimage.cfg.in b/arch/arm/mach- > mvebu/kwbimage.cfg.in > similarity index 100% > rename from board/gdsys/a38x/kwbimage.cfg.in > rename to arch/arm/mach-mvebu/kwbimage.cfg.in > diff --git a/board/CZ.NIC/turris_omnia/kwbimage.cfg > b/board/CZ.NIC/turris_omnia/kwbimage.cfg > deleted file mode 100644 > index 1f748db37c1e..000000000000 > --- a/board/CZ.NIC/turris_omnia/kwbimage.cfg > +++ /dev/null > @@ -1,12 +0,0 @@ > -# > -# Copyright (C) 2014 Stefan Roese <sr@denx.de> > -# > - > -# Armada XP uses version 1 image format > -VERSION 1 > - > -# Boot Media configurations > -BOOT_FROM spi > - > -# Binary Header (bin_hdr) with DDR3 training code > -BINARY spl/u-boot-spl-dtb.bin 0000005b 00000068 > diff --git a/board/Marvell/db-88f6720/kwbimage.cfg > b/board/Marvell/db-88f6720/kwbimage.cfg > deleted file mode 100644 > index 1f748db37c1e..000000000000 > --- a/board/Marvell/db-88f6720/kwbimage.cfg > +++ /dev/null > @@ -1,12 +0,0 @@ > -# > -# Copyright (C) 2014 Stefan Roese <sr@denx.de> > -# > - > -# Armada XP uses version 1 image format > -VERSION 1 > - > -# Boot Media configurations > -BOOT_FROM spi > - > -# Binary Header (bin_hdr) with DDR3 training code > -BINARY spl/u-boot-spl-dtb.bin 0000005b 00000068 > diff --git a/board/Marvell/db-88f6820-amc/kwbimage.cfg > b/board/Marvell/db-88f6820-amc/kwbimage.cfg > deleted file mode 100644 > index 1f748db37c1e..000000000000 > --- a/board/Marvell/db-88f6820-amc/kwbimage.cfg > +++ /dev/null > @@ -1,12 +0,0 @@ > -# > -# Copyright (C) 2014 Stefan Roese <sr@denx.de> > -# > - > -# Armada XP uses version 1 image format > -VERSION 1 > - > -# Boot Media configurations > -BOOT_FROM spi > - > -# Binary Header (bin_hdr) with DDR3 training code > -BINARY spl/u-boot-spl-dtb.bin 0000005b 00000068 > diff --git a/board/Marvell/db-88f6820-gp/kwbimage.cfg > b/board/Marvell/db-88f6820-gp/kwbimage.cfg > deleted file mode 100644 > index 1f748db37c1e..000000000000 > --- a/board/Marvell/db-88f6820-gp/kwbimage.cfg > +++ /dev/null > @@ -1,12 +0,0 @@ > -# > -# Copyright (C) 2014 Stefan Roese <sr@denx.de> > -# > - > -# Armada XP uses version 1 image format > -VERSION 1 > - > -# Boot Media configurations > -BOOT_FROM spi > - > -# Binary Header (bin_hdr) with DDR3 training code > -BINARY spl/u-boot-spl-dtb.bin 0000005b 00000068 > diff --git a/board/Marvell/db-mv784mp-gp/kwbimage.cfg > b/board/Marvell/db-mv784mp-gp/kwbimage.cfg > deleted file mode 100644 > index 1f748db37c1e..000000000000 > --- a/board/Marvell/db-mv784mp-gp/kwbimage.cfg > +++ /dev/null > @@ -1,12 +0,0 @@ > -# > -# Copyright (C) 2014 Stefan Roese <sr@denx.de> > -# > - > -# Armada XP uses version 1 image format > -VERSION 1 > - > -# Boot Media configurations > -BOOT_FROM spi > - > -# Binary Header (bin_hdr) with DDR3 training code > -BINARY spl/u-boot-spl-dtb.bin 0000005b 00000068 > diff --git a/board/Synology/ds414/kwbimage.cfg > b/board/Synology/ds414/kwbimage.cfg > deleted file mode 100644 > index 1f748db37c1e..000000000000 > --- a/board/Synology/ds414/kwbimage.cfg > +++ /dev/null > @@ -1,12 +0,0 @@ > -# > -# Copyright (C) 2014 Stefan Roese <sr@denx.de> > -# > - > -# Armada XP uses version 1 image format > -VERSION 1 > - > -# Boot Media configurations > -BOOT_FROM spi > - > -# Binary Header (bin_hdr) with DDR3 training code > -BINARY spl/u-boot-spl-dtb.bin 0000005b 00000068 > diff --git a/board/gdsys/a38x/Makefile b/board/gdsys/a38x/Makefile > index 18ecbe5e7979..32fffab467be 100644 > --- a/board/gdsys/a38x/Makefile > +++ b/board/gdsys/a38x/Makefile > @@ -7,36 +7,5 @@ > obj-$(CONFIG_TARGET_CONTROLCENTERDC) += controlcenterdc.o hre.o > spl.o keyprogram.o dt_helpers.o > > ifeq ($(CONFIG_SPL_BUILD),) > - > obj-$(CONFIG_TARGET_CONTROLCENTERDC) += hydra.o ihs_phys.o > - > -extra-$(CONFIG_TARGET_CONTROLCENTERDC) += kwbimage.cfg > - > -KWB_REPLACE += BOOT_FROM > -ifneq ($(CONFIG_MVEBU_SPL_BOOT_DEVICE_SPI),) > - KWB_CFG_BOOT_FROM=spi > -endif > -ifneq ($(CONFIG_MVEBU_SPL_BOOT_DEVICE_MMC),) > - KWB_CFG_BOOT_FROM=sdio > -endif > - > -ifneq ($(CONFIG_SECURED_MODE_IMAGE),) > -KWB_REPLACE += CSK_INDEX > -KWB_CFG_CSK_INDEX = $(CONFIG_SECURED_MODE_CSK_INDEX) > - > -KWB_REPLACE += SEC_BOOT_DEV > -KWB_CFG_SEC_BOOT_DEV=$(patsubst "%",%, \ > - $(if $(findstring > BOOT_SPI_NOR_FLASH,$(CONFIG_SPL_BOOT_DEVICE)),0x34) \ > - $(if $(findstring > BOOT_SDIO_MMC_CARD,$(CONFIG_SPL_BOOT_DEVICE)),0x31) \ > - ) > - > -KWB_REPLACE += SEC_FUSE_DUMP > -KWB_CFG_SEC_FUSE_DUMP = a38x > -endif > - > -$(src)/kwbimage.cfg: $(src)/kwbimage.cfg.in include/autoconf.mk \ > - include/config/auto.conf > - $(Q)sed -ne '$(foreach V,$(KWB_REPLACE),s/^#@$(V)/$(V) > $(KWB_CFG_$(V))/;)p' \ > - <$< >$(dir $<)$(@F) > - > endif > diff --git a/board/kobol/helios4/kwbimage.cfg > b/board/kobol/helios4/kwbimage.cfg > deleted file mode 100644 > index 035063bc9097..000000000000 > --- a/board/kobol/helios4/kwbimage.cfg > +++ /dev/null > @@ -1,13 +0,0 @@ > -# SPDX-License-Identifier: GPL-2.0+ > -# > -# Copyright (C) 2015 Stefan Roese <sr@denx.de> > -# > - > -# Armada 38x use version 1 image format > -VERSION 1 > - > -# Boot Media configurations > -BOOT_FROM sdio > - > -# Binary Header (bin_hdr) with DDR3 training code > -BINARY spl/u-boot-spl-dtb.bin 0000005b 00000068 > diff --git a/board/maxbcm/kwbimage.cfg b/board/maxbcm/kwbimage.cfg > deleted file mode 100644 > index 1f748db37c1e..000000000000 > --- a/board/maxbcm/kwbimage.cfg > +++ /dev/null > @@ -1,12 +0,0 @@ > -# > -# Copyright (C) 2014 Stefan Roese <sr@denx.de> > -# > - > -# Armada XP uses version 1 image format > -VERSION 1 > - > -# Boot Media configurations > -BOOT_FROM spi > - > -# Binary Header (bin_hdr) with DDR3 training code > -BINARY spl/u-boot-spl-dtb.bin 0000005b 00000068 > diff --git a/board/solidrun/clearfog/kwbimage.cfg > b/board/solidrun/clearfog/kwbimage.cfg > deleted file mode 100644 > index f41d25a8a142..000000000000 > --- a/board/solidrun/clearfog/kwbimage.cfg > +++ /dev/null > @@ -1,12 +0,0 @@ > -# > -# Copyright (C) 2015 Stefan Roese <sr@denx.de> > -# > - > -# Armada 38x use version 1 image format > -VERSION 1 > - > -# Boot Media configurations > -BOOT_FROM sdio > - > -# Binary Header (bin_hdr) with DDR3 training code > -BINARY spl/u-boot-spl-dtb.bin 0000005b 00000068 > diff --git a/board/theadorable/kwbimage.cfg > b/board/theadorable/kwbimage.cfg > deleted file mode 100644 > index 4f3b7b23f37f..000000000000 > --- a/board/theadorable/kwbimage.cfg > +++ /dev/null > @@ -1,12 +0,0 @@ > -# > -# Copyright (C) 2015-2016 Stefan Roese <sr@denx.de> > -# > - > -# Armada XP uses version 1 image format > -VERSION 1 > - > -# Boot Media configurations > -BOOT_FROM spi > - > -# Binary Header (bin_hdr) with DDR3 training code > -BINARY spl/u-boot-spl-dtb.bin 0000005b 00000068 > diff --git a/configs/clearfog_defconfig b/configs/clearfog_defconfig > index 7a9ee510171b..2164e20a3f08 100644 > --- a/configs/clearfog_defconfig > +++ b/configs/clearfog_defconfig > @@ -6,12 +6,12 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y > CONFIG_SPL_LIBGENERIC_SUPPORT=y > CONFIG_SYS_MALLOC_F_LEN=0x2000 > CONFIG_TARGET_CLEARFOG=y > +CONFIG_MVEBU_SPL_BOOT_DEVICE_MMC=y > CONFIG_SPL_MMC_SUPPORT=y > CONFIG_SPL_SERIAL_SUPPORT=y > CONFIG_SPL=y > CONFIG_DEBUG_UART_BASE=0xd0012000 > CONFIG_DEBUG_UART_CLOCK=250000000 > -CONFIG_SPL_LIBDISK_SUPPORT=y > CONFIG_DEFAULT_DEVICE_TREE="armada-388-clearfog" > CONFIG_DEBUG_UART=y > CONFIG_DISTRO_DEFAULTS=y > diff --git a/configs/helios4_defconfig b/configs/helios4_defconfig > index b72428555d37..27e661debe0b 100644 > --- a/configs/helios4_defconfig > +++ b/configs/helios4_defconfig > @@ -5,9 +5,9 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y > CONFIG_SPL_LIBGENERIC_SUPPORT=y > CONFIG_SYS_MALLOC_F_LEN=0x2000 > CONFIG_TARGET_HELIOS4=y > +CONFIG_MVEBU_SPL_BOOT_DEVICE_MMC=y > CONFIG_SPL_MMC_SUPPORT=y > CONFIG_SPL_SERIAL_SUPPORT=y > -CONFIG_SPL_LIBDISK_SUPPORT=y > CONFIG_SPL=y > CONFIG_DEFAULT_DEVICE_TREE="armada-388-helios4" > CONFIG_DEBUG_UART=y
Hi Dennis, Thanks for taking the time to look into this series. Dennis Gilmore writes: > this patch needs to be rebased on git master as it does not apply. The conflict is trivial for git to handle automatically on rebase (remove, remove). I assume 'git am -3' can do the same. Would you like me to send v2 of this series for that? baruch > El lun, 18-06-2018 a las 21:56 +0300, Baruch Siach escribió: >> Move the gdsys Controlcenter DC specific build time kwbimage.cfg >> generation code into the mach-mvebu/ directory to be shared by all >> 32bit >> mvebu platforms. >> >> Remove board specific kwbimage.cfg files, and use the generated one >> instead. These files are all identical, with two exceptions. Clearfog >> and Helios4 use the sdio boot device, whereas all others use spi. >> Update >> the defconfigs for the exceptional boards to generate the same >> kwbimage.cfg as before. >> >> Signed-off-by: Baruch Siach <baruch@tkos.co.il> >> --- [...] >> diff --git a/configs/helios4_defconfig b/configs/helios4_defconfig >> index b72428555d37..27e661debe0b 100644 >> --- a/configs/helios4_defconfig >> +++ b/configs/helios4_defconfig >> @@ -5,9 +5,9 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y >> CONFIG_SPL_LIBGENERIC_SUPPORT=y >> CONFIG_SYS_MALLOC_F_LEN=0x2000 >> CONFIG_TARGET_HELIOS4=y >> +CONFIG_MVEBU_SPL_BOOT_DEVICE_MMC=y >> CONFIG_SPL_MMC_SUPPORT=y >> CONFIG_SPL_SERIAL_SUPPORT=y >> -CONFIG_SPL_LIBDISK_SUPPORT=y >> CONFIG_SPL=y >> CONFIG_DEFAULT_DEVICE_TREE="armada-388-helios4" >> CONFIG_DEBUG_UART=y -- http://baruch.siach.name/blog/ ~. .~ Tk Open Systems =}------------------------------------------------ooO--U--Ooo------------{= - baruch@tkos.co.il - tel: +972.52.368.4656, http://www.tkos.co.il -
Hi Baruch, On 06.08.2018 12:12, Baruch Siach wrote: > Hi Dennis, > > Thanks for taking the time to look into this series. > > Dennis Gilmore writes: >> this patch needs to be rebased on git master as it does not apply. > > The conflict is trivial for git to handle automatically on rebase > (remove, remove). I assume 'git am -3' can do the same. Would you like > me to send v2 of this series for that? Seems to be fine. I just tried it and it applies fine, resolving the conflicts automatically. No new version necessary. Thanks, Stefan
Weird git am failed for me so I had to tweak the patch. I must have done something wrong on my end. I did test on the helios4 after applying the set and it booted fine On 6 August 2018 2:13:33 pm GMT+02:00, Stefan Roese <sr@denx.de> wrote: >Hi Baruch, > >On 06.08.2018 12:12, Baruch Siach wrote: >> Hi Dennis, >> >> Thanks for taking the time to look into this series. >> >> Dennis Gilmore writes: >>> this patch needs to be rebased on git master as it does not apply. >> >> The conflict is trivial for git to handle automatically on rebase >> (remove, remove). I assume 'git am -3' can do the same. Would you >like >> me to send v2 of this series for that? > >Seems to be fine. I just tried it and it applies fine, resolving >the conflicts automatically. No new version necessary. > >Thanks, >Stefan
diff --git a/board/gdsys/a38x/.gitignore b/arch/arm/mach-mvebu/.gitignore similarity index 100% rename from board/gdsys/a38x/.gitignore rename to arch/arm/mach-mvebu/.gitignore diff --git a/arch/arm/mach-mvebu/Makefile b/arch/arm/mach-mvebu/Makefile index ade7b870646f..d907fac3752d 100644 --- a/arch/arm/mach-mvebu/Makefile +++ b/arch/arm/mach-mvebu/Makefile @@ -25,6 +25,36 @@ obj-$(CONFIG_ARMADA_375) += ../../../drivers/ddr/marvell/axp/xor.o obj-$(CONFIG_ARMADA_38X) += ../../../drivers/ddr/marvell/a38x/xor.o obj-$(CONFIG_ARMADA_XP) += ../../../drivers/ddr/marvell/axp/xor.o obj-$(CONFIG_MVEBU_EFUSE) += efuse.o + +extra-y += kwbimage.cfg + +KWB_REPLACE += BOOT_FROM +ifneq ($(CONFIG_MVEBU_SPL_BOOT_DEVICE_SPI),) + KWB_CFG_BOOT_FROM=spi +endif +ifneq ($(CONFIG_MVEBU_SPL_BOOT_DEVICE_MMC),) + KWB_CFG_BOOT_FROM=sdio +endif + +ifneq ($(CONFIG_SECURED_MODE_IMAGE),) +KWB_REPLACE += CSK_INDEX +KWB_CFG_CSK_INDEX = $(CONFIG_SECURED_MODE_CSK_INDEX) + +KWB_REPLACE += SEC_BOOT_DEV +KWB_CFG_SEC_BOOT_DEV=$(patsubst "%",%, \ + $(if $(findstring BOOT_SPI_NOR_FLASH,$(CONFIG_SPL_BOOT_DEVICE)),0x34) \ + $(if $(findstring BOOT_SDIO_MMC_CARD,$(CONFIG_SPL_BOOT_DEVICE)),0x31) \ + ) + +KWB_REPLACE += SEC_FUSE_DUMP +KWB_CFG_SEC_FUSE_DUMP = a38x +endif + +$(src)/kwbimage.cfg: $(src)/kwbimage.cfg.in include/autoconf.mk \ + include/config/auto.conf + $(Q)sed -ne '$(foreach V,$(KWB_REPLACE),s/^#@$(V)/$(V) $(KWB_CFG_$(V))/;)p' \ + <$< >$(dir $<)$(@F) + endif # CONFIG_SPL_BUILD obj-y += gpio.o obj-y += mbus.o diff --git a/arch/arm/mach-mvebu/include/mach/config.h b/arch/arm/mach-mvebu/include/mach/config.h index 2acfd3314a68..9f51411e43f1 100644 --- a/arch/arm/mach-mvebu/include/mach/config.h +++ b/arch/arm/mach-mvebu/include/mach/config.h @@ -32,12 +32,12 @@ #endif /* - * By default kwbimage.cfg from board specific folder is used + * By default the generated mvebu kwbimage.cfg is used * If for some board, different configuration file need to be used, * CONFIG_SYS_KWD_CONFIG should be defined in board specific header file */ #ifndef CONFIG_SYS_KWD_CONFIG -#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage.cfg +#define CONFIG_SYS_KWD_CONFIG arch/arm/mach-mvebu/kwbimage.cfg #endif /* CONFIG_SYS_KWD_CONFIG */ /* Add target to build it automatically upon "make" */ diff --git a/board/gdsys/a38x/kwbimage.cfg.in b/arch/arm/mach-mvebu/kwbimage.cfg.in similarity index 100% rename from board/gdsys/a38x/kwbimage.cfg.in rename to arch/arm/mach-mvebu/kwbimage.cfg.in diff --git a/board/CZ.NIC/turris_omnia/kwbimage.cfg b/board/CZ.NIC/turris_omnia/kwbimage.cfg deleted file mode 100644 index 1f748db37c1e..000000000000 --- a/board/CZ.NIC/turris_omnia/kwbimage.cfg +++ /dev/null @@ -1,12 +0,0 @@ -# -# Copyright (C) 2014 Stefan Roese <sr@denx.de> -# - -# Armada XP uses version 1 image format -VERSION 1 - -# Boot Media configurations -BOOT_FROM spi - -# Binary Header (bin_hdr) with DDR3 training code -BINARY spl/u-boot-spl-dtb.bin 0000005b 00000068 diff --git a/board/Marvell/db-88f6720/kwbimage.cfg b/board/Marvell/db-88f6720/kwbimage.cfg deleted file mode 100644 index 1f748db37c1e..000000000000 --- a/board/Marvell/db-88f6720/kwbimage.cfg +++ /dev/null @@ -1,12 +0,0 @@ -# -# Copyright (C) 2014 Stefan Roese <sr@denx.de> -# - -# Armada XP uses version 1 image format -VERSION 1 - -# Boot Media configurations -BOOT_FROM spi - -# Binary Header (bin_hdr) with DDR3 training code -BINARY spl/u-boot-spl-dtb.bin 0000005b 00000068 diff --git a/board/Marvell/db-88f6820-amc/kwbimage.cfg b/board/Marvell/db-88f6820-amc/kwbimage.cfg deleted file mode 100644 index 1f748db37c1e..000000000000 --- a/board/Marvell/db-88f6820-amc/kwbimage.cfg +++ /dev/null @@ -1,12 +0,0 @@ -# -# Copyright (C) 2014 Stefan Roese <sr@denx.de> -# - -# Armada XP uses version 1 image format -VERSION 1 - -# Boot Media configurations -BOOT_FROM spi - -# Binary Header (bin_hdr) with DDR3 training code -BINARY spl/u-boot-spl-dtb.bin 0000005b 00000068 diff --git a/board/Marvell/db-88f6820-gp/kwbimage.cfg b/board/Marvell/db-88f6820-gp/kwbimage.cfg deleted file mode 100644 index 1f748db37c1e..000000000000 --- a/board/Marvell/db-88f6820-gp/kwbimage.cfg +++ /dev/null @@ -1,12 +0,0 @@ -# -# Copyright (C) 2014 Stefan Roese <sr@denx.de> -# - -# Armada XP uses version 1 image format -VERSION 1 - -# Boot Media configurations -BOOT_FROM spi - -# Binary Header (bin_hdr) with DDR3 training code -BINARY spl/u-boot-spl-dtb.bin 0000005b 00000068 diff --git a/board/Marvell/db-mv784mp-gp/kwbimage.cfg b/board/Marvell/db-mv784mp-gp/kwbimage.cfg deleted file mode 100644 index 1f748db37c1e..000000000000 --- a/board/Marvell/db-mv784mp-gp/kwbimage.cfg +++ /dev/null @@ -1,12 +0,0 @@ -# -# Copyright (C) 2014 Stefan Roese <sr@denx.de> -# - -# Armada XP uses version 1 image format -VERSION 1 - -# Boot Media configurations -BOOT_FROM spi - -# Binary Header (bin_hdr) with DDR3 training code -BINARY spl/u-boot-spl-dtb.bin 0000005b 00000068 diff --git a/board/Synology/ds414/kwbimage.cfg b/board/Synology/ds414/kwbimage.cfg deleted file mode 100644 index 1f748db37c1e..000000000000 --- a/board/Synology/ds414/kwbimage.cfg +++ /dev/null @@ -1,12 +0,0 @@ -# -# Copyright (C) 2014 Stefan Roese <sr@denx.de> -# - -# Armada XP uses version 1 image format -VERSION 1 - -# Boot Media configurations -BOOT_FROM spi - -# Binary Header (bin_hdr) with DDR3 training code -BINARY spl/u-boot-spl-dtb.bin 0000005b 00000068 diff --git a/board/gdsys/a38x/Makefile b/board/gdsys/a38x/Makefile index 18ecbe5e7979..32fffab467be 100644 --- a/board/gdsys/a38x/Makefile +++ b/board/gdsys/a38x/Makefile @@ -7,36 +7,5 @@ obj-$(CONFIG_TARGET_CONTROLCENTERDC) += controlcenterdc.o hre.o spl.o keyprogram.o dt_helpers.o ifeq ($(CONFIG_SPL_BUILD),) - obj-$(CONFIG_TARGET_CONTROLCENTERDC) += hydra.o ihs_phys.o - -extra-$(CONFIG_TARGET_CONTROLCENTERDC) += kwbimage.cfg - -KWB_REPLACE += BOOT_FROM -ifneq ($(CONFIG_MVEBU_SPL_BOOT_DEVICE_SPI),) - KWB_CFG_BOOT_FROM=spi -endif -ifneq ($(CONFIG_MVEBU_SPL_BOOT_DEVICE_MMC),) - KWB_CFG_BOOT_FROM=sdio -endif - -ifneq ($(CONFIG_SECURED_MODE_IMAGE),) -KWB_REPLACE += CSK_INDEX -KWB_CFG_CSK_INDEX = $(CONFIG_SECURED_MODE_CSK_INDEX) - -KWB_REPLACE += SEC_BOOT_DEV -KWB_CFG_SEC_BOOT_DEV=$(patsubst "%",%, \ - $(if $(findstring BOOT_SPI_NOR_FLASH,$(CONFIG_SPL_BOOT_DEVICE)),0x34) \ - $(if $(findstring BOOT_SDIO_MMC_CARD,$(CONFIG_SPL_BOOT_DEVICE)),0x31) \ - ) - -KWB_REPLACE += SEC_FUSE_DUMP -KWB_CFG_SEC_FUSE_DUMP = a38x -endif - -$(src)/kwbimage.cfg: $(src)/kwbimage.cfg.in include/autoconf.mk \ - include/config/auto.conf - $(Q)sed -ne '$(foreach V,$(KWB_REPLACE),s/^#@$(V)/$(V) $(KWB_CFG_$(V))/;)p' \ - <$< >$(dir $<)$(@F) - endif diff --git a/board/kobol/helios4/kwbimage.cfg b/board/kobol/helios4/kwbimage.cfg deleted file mode 100644 index 035063bc9097..000000000000 --- a/board/kobol/helios4/kwbimage.cfg +++ /dev/null @@ -1,13 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# Copyright (C) 2015 Stefan Roese <sr@denx.de> -# - -# Armada 38x use version 1 image format -VERSION 1 - -# Boot Media configurations -BOOT_FROM sdio - -# Binary Header (bin_hdr) with DDR3 training code -BINARY spl/u-boot-spl-dtb.bin 0000005b 00000068 diff --git a/board/maxbcm/kwbimage.cfg b/board/maxbcm/kwbimage.cfg deleted file mode 100644 index 1f748db37c1e..000000000000 --- a/board/maxbcm/kwbimage.cfg +++ /dev/null @@ -1,12 +0,0 @@ -# -# Copyright (C) 2014 Stefan Roese <sr@denx.de> -# - -# Armada XP uses version 1 image format -VERSION 1 - -# Boot Media configurations -BOOT_FROM spi - -# Binary Header (bin_hdr) with DDR3 training code -BINARY spl/u-boot-spl-dtb.bin 0000005b 00000068 diff --git a/board/solidrun/clearfog/kwbimage.cfg b/board/solidrun/clearfog/kwbimage.cfg deleted file mode 100644 index f41d25a8a142..000000000000 --- a/board/solidrun/clearfog/kwbimage.cfg +++ /dev/null @@ -1,12 +0,0 @@ -# -# Copyright (C) 2015 Stefan Roese <sr@denx.de> -# - -# Armada 38x use version 1 image format -VERSION 1 - -# Boot Media configurations -BOOT_FROM sdio - -# Binary Header (bin_hdr) with DDR3 training code -BINARY spl/u-boot-spl-dtb.bin 0000005b 00000068 diff --git a/board/theadorable/kwbimage.cfg b/board/theadorable/kwbimage.cfg deleted file mode 100644 index 4f3b7b23f37f..000000000000 --- a/board/theadorable/kwbimage.cfg +++ /dev/null @@ -1,12 +0,0 @@ -# -# Copyright (C) 2015-2016 Stefan Roese <sr@denx.de> -# - -# Armada XP uses version 1 image format -VERSION 1 - -# Boot Media configurations -BOOT_FROM spi - -# Binary Header (bin_hdr) with DDR3 training code -BINARY spl/u-boot-spl-dtb.bin 0000005b 00000068 diff --git a/configs/clearfog_defconfig b/configs/clearfog_defconfig index 7a9ee510171b..2164e20a3f08 100644 --- a/configs/clearfog_defconfig +++ b/configs/clearfog_defconfig @@ -6,12 +6,12 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_TARGET_CLEARFOG=y +CONFIG_MVEBU_SPL_BOOT_DEVICE_MMC=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL=y CONFIG_DEBUG_UART_BASE=0xd0012000 CONFIG_DEBUG_UART_CLOCK=250000000 -CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="armada-388-clearfog" CONFIG_DEBUG_UART=y CONFIG_DISTRO_DEFAULTS=y diff --git a/configs/helios4_defconfig b/configs/helios4_defconfig index b72428555d37..27e661debe0b 100644 --- a/configs/helios4_defconfig +++ b/configs/helios4_defconfig @@ -5,9 +5,9 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_TARGET_HELIOS4=y +CONFIG_MVEBU_SPL_BOOT_DEVICE_MMC=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y -CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL=y CONFIG_DEFAULT_DEVICE_TREE="armada-388-helios4" CONFIG_DEBUG_UART=y
Move the gdsys Controlcenter DC specific build time kwbimage.cfg generation code into the mach-mvebu/ directory to be shared by all 32bit mvebu platforms. Remove board specific kwbimage.cfg files, and use the generated one instead. These files are all identical, with two exceptions. Clearfog and Helios4 use the sdio boot device, whereas all others use spi. Update the defconfigs for the exceptional boards to generate the same kwbimage.cfg as before. Signed-off-by: Baruch Siach <baruch@tkos.co.il> --- .../a38x => arch/arm/mach-mvebu}/.gitignore | 0 arch/arm/mach-mvebu/Makefile | 30 ++++++++++++++++++ arch/arm/mach-mvebu/include/mach/config.h | 4 +-- .../arm/mach-mvebu}/kwbimage.cfg.in | 0 board/CZ.NIC/turris_omnia/kwbimage.cfg | 12 ------- board/Marvell/db-88f6720/kwbimage.cfg | 12 ------- board/Marvell/db-88f6820-amc/kwbimage.cfg | 12 ------- board/Marvell/db-88f6820-gp/kwbimage.cfg | 12 ------- board/Marvell/db-mv784mp-gp/kwbimage.cfg | 12 ------- board/Synology/ds414/kwbimage.cfg | 12 ------- board/gdsys/a38x/Makefile | 31 ------------------- board/kobol/helios4/kwbimage.cfg | 13 -------- board/maxbcm/kwbimage.cfg | 12 ------- board/solidrun/clearfog/kwbimage.cfg | 12 ------- board/theadorable/kwbimage.cfg | 12 ------- configs/clearfog_defconfig | 2 +- configs/helios4_defconfig | 2 +- 17 files changed, 34 insertions(+), 156 deletions(-) rename {board/gdsys/a38x => arch/arm/mach-mvebu}/.gitignore (100%) rename {board/gdsys/a38x => arch/arm/mach-mvebu}/kwbimage.cfg.in (100%) delete mode 100644 board/CZ.NIC/turris_omnia/kwbimage.cfg delete mode 100644 board/Marvell/db-88f6720/kwbimage.cfg delete mode 100644 board/Marvell/db-88f6820-amc/kwbimage.cfg delete mode 100644 board/Marvell/db-88f6820-gp/kwbimage.cfg delete mode 100644 board/Marvell/db-mv784mp-gp/kwbimage.cfg delete mode 100644 board/Synology/ds414/kwbimage.cfg delete mode 100644 board/kobol/helios4/kwbimage.cfg delete mode 100644 board/maxbcm/kwbimage.cfg delete mode 100644 board/solidrun/clearfog/kwbimage.cfg delete mode 100644 board/theadorable/kwbimage.cfg