diff mbox

[U-Boot,v1,3/6] video: fsl_dcu_fb: Enable pixel clock after initialization

Message ID 8b92f57a06cd3c4937c7e5a0ddd1781522027766.1486364022.git.maitysanchayan@gmail.com
State Superseded
Delegated to: Anatolij Gustschin
Headers show

Commit Message

Sanchayan Maity Feb. 6, 2017, 7:30 a.m. UTC 
From: Stefan Agner <stefan.agner@toradex.com>

When enabling the DCU and pixel clock, the test mode is activated
since this is the reset configuration. The test mode immediately
shows a red screen on a LCD. A moment later, the DCU gets
initialized properly.

This patch enables the pixel clock after initialization of the DCU
control register. This avoids this initial flicker on LCD screens.

While at it change the polarity of pixel clock to display samples
data on the rising edge.

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com>
---
 drivers/video/fsl_dcu_fb.c | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)
diff mbox

Patch

diff --git a/drivers/video/fsl_dcu_fb.c b/drivers/video/fsl_dcu_fb.c
index a456bd17da..c6fdedb5cf 100644
--- a/drivers/video/fsl_dcu_fb.c
+++ b/drivers/video/fsl_dcu_fb.c
@@ -41,7 +41,7 @@ 
 #define DCU_VSYN_PARA_BP(x)		((x) << 22)
 #define DCU_VSYN_PARA_PW(x)		((x) << 11)
 #define DCU_VSYN_PARA_FP(x)		(x)
-#define DCU_SYN_POL_INV_PXCK_FALL	(0 << 6)
+#define DCU_SYN_POL_INV_PXCK_FALL	(1 << 6)
 #define DCU_SYN_POL_NEG_REMAIN		(0 << 5)
 #define DCU_SYN_POL_INV_VS_LOW		(1 << 1)
 #define DCU_SYN_POL_INV_HS_LOW		(1)
@@ -191,8 +191,6 @@  static void reset_total_layers(void)
 		dcu_write32(&regs->ctrldescl[i][9], 0);
 		dcu_write32(&regs->ctrldescl[i][10], 0);
 	}
-
-	dcu_write32(&regs->update_mode, DCU_UPDATE_MODE_READREG);
 }
 
 static int layer_ctrldesc_init(int index, u32 pixel_format)
@@ -246,8 +244,6 @@  static int layer_ctrldesc_init(int index, u32 pixel_format)
 	dcu_write32(&regs->ctrldescl[index][7], DCU_CTRLDESCLN_8_FG_FCOLOR(0));
 	dcu_write32(&regs->ctrldescl[index][8], DCU_CTRLDESCLN_9_BG_BCOLOR(0));
 
-	dcu_write32(&regs->update_mode, DCU_UPDATE_MODE_READREG);
-
 	return 0;
 }
 
@@ -270,8 +266,6 @@  int fsl_dcu_init(unsigned int xres, unsigned int yres,
 	memset(info.screen_base, 0, info.screen_size);
 
 	reset_total_layers();
-	div = dcu_set_pixel_clock(info.var.pixclock);
-	dcu_write32(&regs->div_ratio, (div - 1));
 
 	dcu_write32(&regs->disp_size,
 		    DCU_DISP_SIZE_DELTA_Y(info.var.yres) |
@@ -310,6 +304,11 @@  int fsl_dcu_init(unsigned int xres, unsigned int yres,
 
 	layer_ctrldesc_init(0, pixel_format);
 
+	div = dcu_set_pixel_clock(info.var.pixclock);
+	dcu_write32(&regs->div_ratio, (div - 1));
+
+	dcu_write32(&regs->update_mode, DCU_UPDATE_MODE_READREG);
+
 	return 0;
 }