From patchwork Thu Apr 7 17:06:01 2016 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Michal Simek X-Patchwork-Id: 607591 X-Patchwork-Delegate: monstr@monstr.eu Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Received: from theia.denx.de (theia.denx.de [85.214.87.163]) by ozlabs.org (Postfix) with ESMTP id 3qgq0Z5C05z9ryW for ; Fri, 8 Apr 2016 03:12:46 +1000 (AEST) Authentication-Results: ozlabs.org; dkim=fail reason="signature verification failed" (2048-bit key; unprotected) header.d=monstr-eu.20150623.gappssmtp.com header.i=@monstr-eu.20150623.gappssmtp.com header.b=DtvtaX6V; dkim-atps=neutral Received: from localhost (localhost [127.0.0.1]) by theia.denx.de (Postfix) with ESMTP id C4AE4B3962; Thu, 7 Apr 2016 19:11:21 +0200 (CEST) X-Amavis-Alert: BAD HEADER SECTION, Duplicate header field: "References" Received: from theia.denx.de ([127.0.0.1]) by localhost (theia.denx.de [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id SEQ1OoA2t5y6; Thu, 7 Apr 2016 19:11:21 +0200 (CEST) Received: from theia.denx.de (localhost [127.0.0.1]) by theia.denx.de (Postfix) with ESMTP id 00EABB3999; Thu, 7 Apr 2016 19:08:28 +0200 (CEST) Received: from localhost (localhost [127.0.0.1]) by theia.denx.de (Postfix) with ESMTP id B461FB3984 for ; Thu, 7 Apr 2016 19:08:14 +0200 (CEST) X-Amavis-Alert: BAD HEADER SECTION, Duplicate header field: "References" Received: from theia.denx.de ([127.0.0.1]) by localhost (theia.denx.de [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id Z84qBdjFOtle for ; Thu, 7 Apr 2016 19:08:14 +0200 (CEST) X-policyd-weight: NOT_IN_SBL_XBL_SPAMHAUS=-1.5 NOT_IN_SPAMCOP=-1.5 NOT_IN_BL_NJABL=-1.5 (only DNSBL check requested) Received: from mail-wm0-f47.google.com (mail-wm0-f47.google.com [74.125.82.47]) by theia.denx.de (Postfix) with ESMTPS id C1C1CB3913 for ; Thu, 7 Apr 2016 19:06:54 +0200 (CEST) Received: by mail-wm0-f47.google.com with SMTP id l6so34136949wml.1 for ; Thu, 07 Apr 2016 10:06:54 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=monstr-eu.20150623.gappssmtp.com; s=20150623; h=sender:from:to:cc:subject:date:message-id:in-reply-to:references :in-reply-to:references; bh=5z2rF9xU943TsXOvq/m6w/NKC7JDr4rTVU7vbeyWQrU=; b=DtvtaX6VNx+T71sR5QHYFBci8mloP9K/EvJKnF3N4q8FxDauWHKjgqiru8NFI5mKZq 502bVtx0XM8GlQHtwh0rs2j+IJ5pJEYbaF86sKunUlcUoz5LKHlzGyEIWXp0PII/Of5Z LOMHB9LF4+ZQIL0BdyQ+JJzU3iTGphwVLfDKsCqvJTtAYSxMjZkPP337uV7nT/6do229 QjDkHFTK+bpr9put+yhD+BTF2XYPyjQbpJ56k/vVDrPmAcOFqy1xbf9+2pHa5arUIJhj y7W90KB5WYBOhbk0TIMziiOEbv1Ex/+S3ivDD8+hBlEaEOUQfsgU93mnPyyUnbasUwPQ dsHw== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20130820; h=x-gm-message-state:sender:from:to:cc:subject:date:message-id :in-reply-to:references:in-reply-to:references; bh=5z2rF9xU943TsXOvq/m6w/NKC7JDr4rTVU7vbeyWQrU=; b=k3OL+Ho/vuV82M++iWVvKGHBNABr6+78zEbJc1Z1Ftirth/+JoygEPzG+UK5hjgFkm s/BLsPtTc4Dcx3d8Bayn14s7LyF93K1yp2lzfNF0fU7ZHEnYrHIOGQwe6+AoexXXc0XK nmjVtLs1YeBD71077k/IkK8/Or+Ww9+RS4+Pc3ado/bk+9tohSgpfrzrNaucbhSZQt3c B6192uuIVRSynf2eYY6zspi5G2hUcAv4RlVPhFBlJpkes5kGCC+rtllEK1V7vPlKWH2+ XeoviiwQeJZKHL9mUAbaHvTVQMdffsvHw+sBiBP2pvS88HzOKN8YSTAaAEt9MHMPZZja wPDw== X-Gm-Message-State: AD7BkJKqP++ynV03U7QgtqCTiS3DDkijvFjy4jq+r/7qzoMvZ+HxTvrlEvYPuIYEaEdjCg== X-Received: by 10.194.58.195 with SMTP id t3mr4554229wjq.97.1460048814409; Thu, 07 Apr 2016 10:06:54 -0700 (PDT) Received: from localhost (nat-35.starnet.cz. [178.255.168.35]) by smtp.gmail.com with ESMTPSA id ka4sm9376028wjc.47.2016.04.07.10.06.53 (version=TLS1_2 cipher=AES128-SHA bits=128/128); Thu, 07 Apr 2016 10:06:53 -0700 (PDT) From: Michal Simek To: u-boot@lists.denx.de Date: Thu, 7 Apr 2016 19:06:01 +0200 Message-Id: <6dfe8da0b4d1c722e64be465596dea899eab634f.1460048744.git.michal.simek@xilinx.com> X-Mailer: git-send-email 1.9.1 In-Reply-To: References: In-Reply-To: References: Cc: Ian Campbell , Stefan Roese Subject: [U-Boot] [PATCH 32/33] ARM64: zynqmp: Add support for zc1751 with DC cards X-BeenThere: u-boot@lists.denx.de X-Mailman-Version: 2.1.15 Precedence: list List-Id: U-Boot discussion List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Errors-To: u-boot-bounces@lists.denx.de Sender: "U-Boot" Support ZynqMP zc1751 with DC cards. Signed-off-by: Michal Simek --- arch/arm/dts/Makefile | 5 +- arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts | 211 ++++++++++++++++++++ arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts | 236 +++++++++++++++++++++++ arch/arm/dts/zynqmp-zc1751-xm019-dc5.dts | 121 ++++++++++++ configs/xilinx_zynqmp_zc1751_xm015_dc1_defconfig | 33 ++++ configs/xilinx_zynqmp_zc1751_xm016_dc2_defconfig | 32 +++ configs/xilinx_zynqmp_zc1751_xm019_dc5_defconfig | 20 ++ include/configs/xilinx_zynqmp_zc1751_xm015_dc1.h | 31 +++ include/configs/xilinx_zynqmp_zc1751_xm016_dc2.h | 28 +++ include/configs/xilinx_zynqmp_zc1751_xm019_dc5.h | 30 +++ 10 files changed, 746 insertions(+), 1 deletion(-) create mode 100644 arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts create mode 100644 arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts create mode 100644 arch/arm/dts/zynqmp-zc1751-xm019-dc5.dts create mode 100644 configs/xilinx_zynqmp_zc1751_xm015_dc1_defconfig create mode 100644 configs/xilinx_zynqmp_zc1751_xm016_dc2_defconfig create mode 100644 configs/xilinx_zynqmp_zc1751_xm019_dc5_defconfig create mode 100644 include/configs/xilinx_zynqmp_zc1751_xm015_dc1.h create mode 100644 include/configs/xilinx_zynqmp_zc1751_xm016_dc2.h create mode 100644 include/configs/xilinx_zynqmp_zc1751_xm019_dc5.h diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index da3be7044ebb..54a318a290a8 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -83,7 +83,10 @@ dtb-$(CONFIG_ARCH_ZYNQ) += zynq-zc702.dtb \ dtb-$(CONFIG_ARCH_ZYNQMP) += \ zynqmp-ep108.dtb \ zynqmp-zcu102.dtb \ - zynqmp-zcu102-revB.dtb + zynqmp-zcu102-revB.dtb \ + zynqmp-zc1751-xm015-dc1.dtb \ + zynqmp-zc1751-xm016-dc2.dtb \ + zynqmp-zc1751-xm019-dc5.dtb dtb-$(CONFIG_AM33XX) += am335x-boneblack.dtb am335x-evm.dtb dtb-$(CONFIG_AM43XX) += am437x-gp-evm.dtb am437x-sk-evm.dtb dtb-$(CONFIG_THUNDERX) += thunderx-88xx.dtb diff --git a/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts b/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts new file mode 100644 index 000000000000..c68a41bea79a --- /dev/null +++ b/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts @@ -0,0 +1,211 @@ +/* + * dts file for Xilinx ZynqMP zc1751-xm015-dc1 + * + * (C) Copyright 2015, Xilinx, Inc. + * + * Michal Simek + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/dts-v1/; + +#include "zynqmp.dtsi" +#include "zynqmp-clk.dtsi" + +/ { + model = "ZynqMP zc1751-xm015-dc1 RevA"; + compatible = "xlnx,zynqmp-zc1751", "xlnx,zynqmp"; + + aliases { + ethernet0 = &gem3; + gpio0 = &gpio; + i2c0 = &i2c1; + mmc0 = &sdhci0; + mmc1 = &sdhci1; + rtc0 = &rtc; + serial0 = &uart0; + spi0 = &qspi; + usb0 = &usb0; + }; + + chosen { + bootargs = "earlycon"; + stdout-path = "serial0:115200n8"; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>; + }; +}; + +/* fpd_dma clk 667MHz, lpd_dma 500MHz */ +&fpd_dma_chan1 { + status = "okay"; + xlnx,include-sg; /* for testing purpose */ + xlnx,overfetch; /* for testing purpose */ + xlnx,ratectrl = <0>; /* for testing purpose */ + xlnx,src-issue = <31>; +}; + +&fpd_dma_chan2 { + status = "okay"; + xlnx,ratectrl = <100>; /* for testing purpose */ + xlnx,src-issue = <4>; /* for testing purpose */ +}; + +&fpd_dma_chan3 { + status = "okay"; +}; + +&fpd_dma_chan4 { + status = "okay"; + xlnx,include-sg; /* for testing purpose */ +}; + +&fpd_dma_chan5 { + status = "okay"; +}; + +&fpd_dma_chan6 { + status = "okay"; + xlnx,include-sg; /* for testing purpose */ +}; + +&fpd_dma_chan7 { + status = "okay"; +}; + +&fpd_dma_chan8 { + status = "okay"; + xlnx,include-sg; /* for testing purpose */ +}; + +&gem3 { + status = "okay"; + local-mac-address = [00 0a 35 00 02 90]; + phy-handle = <&phy0>; + phy-mode = "rgmii-id"; + phy0: phy@0 { + reg = <0>; + }; +}; + +&gpio { + status = "okay"; +}; + +&gpu { + status = "okay"; +}; + +&i2c1 { + status = "okay"; + clock-frequency = <400000>; + eeprom@55 { + compatible = "at,24c64"; /* 24AA64 */ + reg = <0x55>; + }; +}; + +&qspi { + status = "okay"; + flash@0 { + compatible = "m25p80"; /* Micron MT25QU512ABB8ESF */ + #address-cells = <1>; + #size-cells = <1>; + reg = <0x0>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <4>; + spi-max-frequency = <108000000>; /* Based on DC1 spec */ + partition@qspi-fsbl-uboot { /* for testing purpose */ + label = "qspi-fsbl-uboot"; + reg = <0x0 0x100000>; + }; + partition@qspi-linux { /* for testing purpose */ + label = "qspi-linux"; + reg = <0x100000 0x500000>; + }; + partition@qspi-device-tree { /* for testing purpose */ + label = "qspi-device-tree"; + reg = <0x600000 0x20000>; + }; + partition@qspi-rootfs { /* for testing purpose */ + label = "qspi-rootfs"; + reg = <0x620000 0x5E0000>; + }; + }; +}; + +&rtc { + status = "okay"; +}; + +&sata { + status = "okay"; + /* SATA phy OOB timing settings */ + ceva,p0-cominit-params = /bits/ 8 <0x1B 0x4D 0x18 0x28>; + ceva,p0-comwake-params = /bits/ 8 <0x06 0x19 0x08 0x0E>; + ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; + ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>; + ceva,p1-cominit-params = /bits/ 8 <0x1B 0x4D 0x18 0x28>; + ceva,p1-comwake-params = /bits/ 8 <0x06 0x19 0x08 0x0E>; + ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; + ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>; +}; + +/* eMMC */ +&sdhci0 { + status = "okay"; + bus-width = <8>; +}; + +/* SD1 with level shifter */ +&sdhci1 { + status = "okay"; + no-1-8-v; /* for 1.0 silicon */ +}; + +&uart0 { + status = "okay"; +}; + +/* ULPI SMSC USB3320 */ +&usb0 { + status = "okay"; + dr_mode = "host"; +}; + +&xilinx_drm { + status = "okay"; +}; + +&xlnx_dp { + status = "okay"; +}; + +&xlnx_dp_sub { + status = "okay"; + xlnx,vid-clk-pl; +}; + +&xlnx_dp_snd_pcm0 { + status = "okay"; +}; + +&xlnx_dp_snd_pcm1 { + status = "okay"; +}; + +&xlnx_dp_snd_card { + status = "okay"; +}; + +&xlnx_dp_snd_codec0 { + status = "okay"; +}; + +&xlnx_dpdma { + status = "okay"; +}; diff --git a/arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts b/arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts new file mode 100644 index 000000000000..3fdfcc8a11ae --- /dev/null +++ b/arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts @@ -0,0 +1,236 @@ +/* + * dts file for Xilinx ZynqMP zc1751-xm016-dc2 + * + * (C) Copyright 2015, Xilinx, Inc. + * + * Michal Simek + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/dts-v1/; + +#include "zynqmp.dtsi" +#include "zynqmp-clk.dtsi" + +/ { + model = "ZynqMP zc1751-xm016-dc2 RevA"; + compatible = "xlnx,zynqmp-zc1751", "xlnx,zynqmp"; + + aliases { + can0 = &can0; + can1 = &can1; + ethernet0 = &gem2; + gpio0 = &gpio; + i2c0 = &i2c0; + rtc0 = &rtc; + serial0 = &uart0; + serial1 = &uart1; + spi0 = &spi0; + spi1 = &spi1; + usb0 = &usb1; + }; + + chosen { + bootargs = "earlycon"; + stdout-path = "serial0:115200n8"; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>; + }; +}; + +&can0 { + status = "okay"; +}; + +&can1 { + status = "okay"; +}; + +/* fpd_dma clk 667MHz, lpd_dma 500MHz */ +&fpd_dma_chan1 { + status = "okay"; + xlnx,include-sg; /* for testing purpose */ + xlnx,overfetch; /* for testing purpose */ + xlnx,ratectrl = <0>; /* for testing purpose */ + xlnx,src-issue = <31>; +}; + +&fpd_dma_chan2 { + status = "okay"; + xlnx,ratectrl = <100>; /* for testing purpose */ + xlnx,src-issue = <4>; /* for testing purpose */ +}; + +&fpd_dma_chan3 { + status = "okay"; +}; + +&fpd_dma_chan4 { + status = "okay"; + xlnx,include-sg; /* for testing purpose */ +}; + +&fpd_dma_chan5 { + status = "okay"; +}; + +&fpd_dma_chan6 { + status = "okay"; + xlnx,include-sg; /* for testing purpose */ +}; + +&fpd_dma_chan7 { + status = "okay"; +}; + +&fpd_dma_chan8 { + status = "okay"; + xlnx,include-sg; /* for testing purpose */ +}; + +&gem2 { + status = "okay"; + local-mac-address = [00 0a 35 00 02 90]; + phy-handle = <&phy0>; + phy-mode = "rgmii-id"; + phy0: phy@5 { + reg = <5>; + ti,rx-internal-delay = <0x8>; + ti,tx-internal-delay = <0xa>; + ti,fifo-depth = <0x1>; + }; +}; + +&gpio { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + clock-frequency = <400000>; + + tca6416_u26: gpio@20 { + compatible = "ti,tca6416"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + /* IRQ not connected */ + }; + + rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + }; +}; + +&nand0 { + status = "okay"; + arasan,has-mdma; + num-cs = <2>; + + partition@0 { /* for testing purpose */ + label = "nand-fsbl-uboot"; + reg = <0x0 0x0 0x400000>; + }; + partition@1 { /* for testing purpose */ + label = "nand-linux"; + reg = <0x0 0x400000 0x1400000>; + }; + partition@2 { /* for testing purpose */ + label = "nand-device-tree"; + reg = <0x0 0x1800000 0x400000>; + }; + partition@3 { /* for testing purpose */ + label = "nand-rootfs"; + reg = <0x0 0x1C00000 0x1400000>; + }; + partition@4 { /* for testing purpose */ + label = "nand-bitstream"; + reg = <0x0 0x3000000 0x400000>; + }; + partition@5 { /* for testing purpose */ + label = "nand-misc"; + reg = <0x0 0x3400000 0xFCC00000>; + }; + + partition@6 { /* for testing purpose */ + label = "nand1-fsbl-uboot"; + reg = <0x1 0x0 0x400000>; + }; + partition@7 { /* for testing purpose */ + label = "nand1-linux"; + reg = <0x1 0x400000 0x1400000>; + }; + partition@8 { /* for testing purpose */ + label = "nand1-device-tree"; + reg = <0x1 0x1800000 0x400000>; + }; + partition@9 { /* for testing purpose */ + label = "nand1-rootfs"; + reg = <0x1 0x1C00000 0x1400000>; + }; + partition@10 { /* for testing purpose */ + label = "nand1-bitstream"; + reg = <0x1 0x3000000 0x400000>; + }; + partition@11 { /* for testing purpose */ + label = "nand1-misc"; + reg = <0x1 0x3400000 0xFCC00000>; + }; +}; + +&rtc { + status = "okay"; +}; + +&spi0 { + status = "okay"; + num-cs = <1>; + spi0_flash0: spi0_flash0@0 { + compatible = "m25p80"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <50000000>; + reg = <0>; + + spi0_flash0@00000000 { + label = "spi0_flash0"; + reg = <0x0 0x100000>; + }; + }; +}; + +&spi1 { + status = "okay"; + num-cs = <1>; + spi1_flash0: spi1_flash0@0 { + compatible = "mtd_dataflash"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <20000000>; + reg = <0>; + + spi1_flash0@00000000 { + label = "spi1_flash0"; + reg = <0x0 0x84000>; + }; + }; +}; + +/* ULPI SMSC USB3320 */ +&usb1 { + status = "okay"; + dr_mode = "host"; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; diff --git a/arch/arm/dts/zynqmp-zc1751-xm019-dc5.dts b/arch/arm/dts/zynqmp-zc1751-xm019-dc5.dts new file mode 100644 index 000000000000..d754f9f9040a --- /dev/null +++ b/arch/arm/dts/zynqmp-zc1751-xm019-dc5.dts @@ -0,0 +1,121 @@ +/* + * dts file for Xilinx ZynqMP zc1751-xm019-dc5 + * + * (C) Copyright 2015, Xilinx, Inc. + * + * Siva Durga Prasad + * Michal Simek + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/dts-v1/; + +#include "zynqmp.dtsi" +#include "zynqmp-clk.dtsi" +/ { + model = "ZynqMP zc1751-xm019-dc5 RevA"; + compatible = "xlnx,zynqmp-zc1751", "xlnx,zynqmp"; + + aliases { + ethernet0 = &gem1; + gpio0 = &gpio; + i2c0 = &i2c0; + i2c1 = &i2c1; + mmc0 = &sdhci0; + serial0 = &uart0; + serial1 = &uart1; + }; + + chosen { + bootargs = "earlycon=cdns,mmio,0xff000000,115200n8"; + stdout-path = "serial0:115200n8"; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>; + }; +}; + +/* fpd_dma clk 667MHz, lpd_dma 500MHz */ +&fpd_dma_chan1 { + status = "okay"; + xlnx,include-sg; /* for testing purpose */ + xlnx,overfetch; /* for testing purpose */ + xlnx,ratectrl = <0>; /* for testing purpose */ + xlnx,src-issue = <31>; +}; + +&fpd_dma_chan2 { + status = "okay"; + xlnx,ratectrl = <100>; /* for testing purpose */ + xlnx,src-issue = <4>; /* for testing purpose */ +}; + +&fpd_dma_chan3 { + status = "okay"; +}; + +&fpd_dma_chan4 { + status = "okay"; + xlnx,include-sg; /* for testing purpose */ +}; + +&fpd_dma_chan5 { + status = "okay"; +}; + +&fpd_dma_chan6 { + status = "okay"; + xlnx,include-sg; /* for testing purpose */ +}; + +&fpd_dma_chan7 { + status = "okay"; +}; + +&fpd_dma_chan8 { + status = "okay"; + xlnx,include-sg; /* for testing purpose */ +}; + +&gem1 { + status = "okay"; + local-mac-address = [00 0a 35 00 02 90]; + phy-handle = <&phy0>; + phy-mode = "rgmii-id"; + phy0: phy@0 { + reg = <0>; + }; +}; + +&gpio { + status = "okay"; +}; + +/* FIXME: Add device */ +&i2c0 { + status = "okay"; +}; + +/* FIXME: Add device */ +&i2c1 { + status = "okay"; +}; + +&sdhci0 { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&watchdog0 { + status = "okay"; +}; diff --git a/configs/xilinx_zynqmp_zc1751_xm015_dc1_defconfig b/configs/xilinx_zynqmp_zc1751_xm015_dc1_defconfig new file mode 100644 index 000000000000..6d716fe945df --- /dev/null +++ b/configs/xilinx_zynqmp_zc1751_xm015_dc1_defconfig @@ -0,0 +1,33 @@ +CONFIG_ARM=y +CONFIG_SYS_CONFIG_NAME="xilinx_zynqmp_zc1751_xm015_dc1" +CONFIG_ARCH_ZYNQMP=y +CONFIG_DM_GPIO=y +CONFIG_ZYNQMP_USB=y +CONFIG_SYS_TEXT_BASE=0x8000000 +CONFIG_DEFAULT_DEVICE_TREE="zynqmp-zc1751-xm015-dc1" +CONFIG_FIT=y +CONFIG_FIT_VERBOSE=y +CONFIG_SYS_PROMPT="ZynqMP> " +# CONFIG_CMD_IMLS is not set +CONFIG_CMD_MEMTEST=y +# CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_TFTPPUT=y +CONFIG_CMD_DHCP=y +CONFIG_CMD_PING=y +CONFIG_CMD_TIME=y +CONFIG_CMD_TIMER=y +CONFIG_OF_EMBED=y +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_DM_MMC=y +CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_BAR=y +CONFIG_SPI_FLASH_SPANSION=y +CONFIG_SPI_FLASH_STMICRO=y +CONFIG_SPI_FLASH_WINBOND=y +CONFIG_DM_ETH=y +CONFIG_ZYNQ_GEM=y +CONFIG_USB=y +CONFIG_USB_ULPI_VIEWPORT=y +CONFIG_USB_ULPI=y +CONFIG_USB_GADGET=y diff --git a/configs/xilinx_zynqmp_zc1751_xm016_dc2_defconfig b/configs/xilinx_zynqmp_zc1751_xm016_dc2_defconfig new file mode 100644 index 000000000000..c4da7b110fbb --- /dev/null +++ b/configs/xilinx_zynqmp_zc1751_xm016_dc2_defconfig @@ -0,0 +1,32 @@ +CONFIG_ARM=y +CONFIG_SYS_CONFIG_NAME="xilinx_zynqmp_zc1751_xm016_dc2" +CONFIG_ARCH_ZYNQMP=y +CONFIG_DM_GPIO=y +CONFIG_ZYNQMP_USB=y +CONFIG_SYS_TEXT_BASE=0x8000000 +CONFIG_DEFAULT_DEVICE_TREE="zynqmp-zc1751-xm016-dc2" +CONFIG_FIT=y +CONFIG_FIT_VERBOSE=y +CONFIG_SYS_PROMPT="ZynqMP> " +# CONFIG_CMD_IMLS is not set +CONFIG_CMD_MEMTEST=y +# CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_TFTPPUT=y +CONFIG_CMD_DHCP=y +CONFIG_CMD_PING=y +CONFIG_CMD_TIME=y +CONFIG_CMD_TIMER=y +CONFIG_OF_EMBED=y +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_DM_MMC=y +CONFIG_NAND_ARASAN=y +CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_BAR=y +CONFIG_SPI_FLASH_SST=y +CONFIG_DM_ETH=y +CONFIG_ZYNQ_GEM=y +CONFIG_USB=y +CONFIG_USB_ULPI_VIEWPORT=y +CONFIG_USB_ULPI=y +CONFIG_USB_GADGET=y diff --git a/configs/xilinx_zynqmp_zc1751_xm019_dc5_defconfig b/configs/xilinx_zynqmp_zc1751_xm019_dc5_defconfig new file mode 100644 index 000000000000..296fd66f9fb0 --- /dev/null +++ b/configs/xilinx_zynqmp_zc1751_xm019_dc5_defconfig @@ -0,0 +1,20 @@ +CONFIG_ARM=y +CONFIG_SYS_CONFIG_NAME="xilinx_zynqmp_zc1751_xm019_dc5" +CONFIG_ARCH_ZYNQMP=y +CONFIG_DM_GPIO=y +CONFIG_SYS_TEXT_BASE=0x8000000 +CONFIG_DEFAULT_DEVICE_TREE="zynqmp-zc1751-xm019-dc5" +CONFIG_FIT=y +CONFIG_FIT_VERBOSE=y +CONFIG_SYS_PROMPT="ZynqMP> " +# CONFIG_CMD_IMLS is not set +CONFIG_CMD_MEMTEST=y +# CONFIG_CMD_FLASH is not set +CONFIG_CMD_TFTPPUT=y +CONFIG_CMD_DHCP=y +CONFIG_CMD_PING=y +CONFIG_CMD_TIME=y +CONFIG_CMD_TIMER=y +CONFIG_OF_EMBED=y +CONFIG_DM_MMC=y +CONFIG_DM_ETH=y diff --git a/include/configs/xilinx_zynqmp_zc1751_xm015_dc1.h b/include/configs/xilinx_zynqmp_zc1751_xm015_dc1.h new file mode 100644 index 000000000000..7aa993688158 --- /dev/null +++ b/include/configs/xilinx_zynqmp_zc1751_xm015_dc1.h @@ -0,0 +1,31 @@ +/* + * Configuration for Xilinx ZynqMP zc1751 XM015 DC1 + * + * (C) Copyright 2015 Xilinx, Inc. + * Michal Simek + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_ZYNQMP_ZC1751_XM015_DC1_H +#define __CONFIG_ZYNQMP_ZC1751_XM015_DC1_H + +#define CONFIG_ZYNQ_SDHCI0 +#define CONFIG_ZYNQ_SDHCI1 +#define CONFIG_ZYNQ_I2C1 +#define CONFIG_SYS_I2C_ZYNQ +#define CONFIG_AHCI +#define CONFIG_ZYNQMP_XHCI_LIST {ZYNQMP_USB0_XHCI_BASEADDR} + +#define CONFIG_IDENT_STRING " Xilinx ZynqMP ZC1751 xm015 dc1" + +#define CONFIG_KERNEL_FDT_OFST_SIZE \ + "kernel_offset=0x400000\0" \ + "fdt_offset=0x2400000\0" \ + "kernel_size=0x2000000\0" \ + "fdt_size=0x80000\0" \ + "board=zc1751-dc1\0" + +#include + +#endif /* __CONFIG_ZYNQMP_ZC1751_XM015_DC1_H */ diff --git a/include/configs/xilinx_zynqmp_zc1751_xm016_dc2.h b/include/configs/xilinx_zynqmp_zc1751_xm016_dc2.h new file mode 100644 index 000000000000..2727dc6e0708 --- /dev/null +++ b/include/configs/xilinx_zynqmp_zc1751_xm016_dc2.h @@ -0,0 +1,28 @@ +/* + * Configuration for Xilinx ZynqMP zc1751 XM016 DC2 + * + * (C) Copyright 2015 Xilinx, Inc. + * Michal Simek + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_ZYNQMP_ZC1751_XM016_DC2_H +#define __CONFIG_ZYNQMP_ZC1751_XM016_DC2_H + +#define CONFIG_ZYNQ_I2C0 +#define CONFIG_SYS_I2C_ZYNQ +#define CONFIG_ZYNQMP_XHCI_LIST {ZYNQMP_USB1_XHCI_BASEADDR} + +#define CONFIG_IDENT_STRING " Xilinx ZynqMP ZC1751 xm016 dc2" + +#define CONFIG_KERNEL_FDT_OFST_SIZE \ + "kernel_offset=0x400000\0" \ + "fdt_offset=0x2400000\0" \ + "kernel_size=0x2000000\0" \ + "fdt_size=0x80000\0" \ + "board=zc1751-dc2\0" + +#include + +#endif /* __CONFIG_ZYNQMP_ZC1751_XM016_DC2_H */ diff --git a/include/configs/xilinx_zynqmp_zc1751_xm019_dc5.h b/include/configs/xilinx_zynqmp_zc1751_xm019_dc5.h new file mode 100644 index 000000000000..d9409bad6552 --- /dev/null +++ b/include/configs/xilinx_zynqmp_zc1751_xm019_dc5.h @@ -0,0 +1,30 @@ +/* + * Configuration for Xilinx ZynqMP zc1751 XM019 DC5 + * + * (C) Copyright 2015 Xilinx, Inc. + * Siva Durga Prasad + * Michal Simek + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_ZYNQMP_ZC1751_XM019_DC5_H +#define __CONFIG_ZYNQMP_ZC1751_XM019_DC5_H + +#define CONFIG_ZYNQ_SDHCI0 +#define CONFIG_ZYNQ_I2C0 +#define CONFIG_ZYNQ_I2C1 +#define CONFIG_SYS_I2C_ZYNQ + +#define CONFIG_IDENT_STRING " Xilinx ZynqMP ZC1751 xm019 dc5" + +#define CONFIG_KERNEL_FDT_OFST_SIZE \ + "kernel_offset=0x400000\0" \ + "fdt_offset=0x2400000\0" \ + "kernel_size=0x2000000\0" \ + "fdt_size=0x80000\0" \ + "board=zc1751-dc5\0" + +#include + +#endif /* __CONFIG_ZYNQMP_ZC1751_XM019_DC5_H */