mbox

[U-Boot,PULL] Please pull u-boot-imx

Message ID 55560E42.6060901@denx.de
State Accepted
Delegated to: Tom Rini
Headers show

Pull-request

git://www.denx.de/git/u-boot-imx.git master

Message

Stefano Babic May 15, 2015, 3:18 p.m. UTC
Hi Tom,

please pull from u-boot-imx, thanks !

The following changes since commit ace97d26176a3ebc9ec07738450de93eea35975c:

  Merge branch 'zynq' of git://www.denx.de/git/u-boot-microblaze
(2015-04-29 06:46:33 -0400)

are available in the git repository at:


  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to 6f63370510ebd7b6dfc83ef4cc6bfd448ecc5dc2:

  imx: ventana: use stack relocation (2015-05-15 16:42:14 +0200)

----------------------------------------------------------------
Brecht Neyrinck (1):
      bugfix i.mx6 pwm: prevent overflow of period_c * duty_ns

Fabio Estevam (11):
      mx6cuboxi: Add HDMI output support
      mx6cuboxi: Add USB host support
      mx6cuboxi: Allow HDMI and USB keyboard to be stdout/stdin
      logos: Add Solidrun's logo
      mx6cuboxi: Fix Ethernet PHY detection problem
      mx6cuboxi: Pull down PAD_ENET_RXD0/RXD1
      mx6cuboxi: Skip usb initialization when booting without HDMI
      hummingboard: Remove mx6solo specific support
      mx6cuboxi: Mention Cubox-i in the README
      warp: README: Fix typo
      mx6: Set shared override bit in PL310 AUX_CTRL register

Heiko Schocher (2):
      arm, imx6, i2c: add I2C4 for MX6DL
      i2c, mxc: rework i2c base address names for different SoCs

Nikolay Dimitrov (2):
      arm: mx6: Clamp MMDC and DDR3 clocks for timing calculations
      arm: mx6: ddr3: Remove dead code

Soeren Moch (4):
      tbs2910: support for usb otg host mode
      tbs2910: only enable vga output for stdout/stderr when hdmi detected
      tbs2910: use default CONFIG_SYS_PBSIZE
      tbs2910: add CONFIG_SUPPORT_EMMC_BOOT

Stefan Roese (2):
      arm: mx6: tqma6: Fix USB and add other filesystems
      arm: mx6: tqma6: Update to optionally configure an alternative SPI
setup

Stefano Babic (2):
      Merge branch 'master' of git://git.denx.de/u-boot
      Merge branch 'master' of git://git.denx.de/u-boot

Tim Harvey (17):
      imx: ventana: fix boot to SD
      imx: ventana: set dtype env var to boot media
      imx: ventana: display SPL boot device
      imx: ventana: config: enable gpio command
      imx: ventana: config: enable driver model
      imx: ventana: register gpio's with gpio_request
      imx: ventana: enable DM_SERIAL
      imx: ventana: config: enable Thermal support
      imx: ventana: fix pcie reset for GW522x
      imx: ventana: default msata/pci mux to pci before PCI enumeration
      imx: ventana: split out common functions between SPL and uboot
      imx: ventana: move GSC boot watchdog disable function to gsc.c
      imx: ventana: detect pmic using i2c probe instead of board model
      imx: ventana: use common uart and i2c setup functions in SPL
      imx: ventana: add gpio setup to SPL
      imx: ventana: add GSC boot watchdog disable to SPL
      imx: ventana: use stack relocation

Ulises Cardenas (2):
      Fix mxc_hab documenation
      imx: dek_blob: Add explicit include for mapmem

 arch/arm/Kconfig                            |   5 -
 arch/arm/cpu/armv7/mx6/clock.c              |  33 +++--
 arch/arm/cpu/armv7/mx6/ddr.c                |  52 +++----
 arch/arm/cpu/armv7/mx6/soc.c                |   8 +
 arch/arm/imx-common/cmd_dek.c               |   1 +
 arch/arm/imx-common/i2c-mxv7.c              |   5 +-
 arch/arm/include/asm/arch-imx/imx-regs.h    |   2 +-
 arch/arm/include/asm/arch-mx25/imx-regs.h   |   6 +-
 arch/arm/include/asm/arch-mx27/imx-regs.h   |   4 +-
 arch/arm/include/asm/arch-mx6/crm_regs.h    |   2 +
 arch/arm/include/asm/arch-mx6/imx-regs.h    |   1 +
 arch/arm/include/asm/arch-vf610/imx-regs.h  |   2 +-
 arch/arm/include/asm/pl310.h                |   2 +
 board/gateworks/gw_ventana/Makefile         |   2 +-
 board/gateworks/gw_ventana/common.c         | 827
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 board/gateworks/gw_ventana/common.h         |  98 +++++++++++++
 board/gateworks/gw_ventana/gsc.c            |  27 ++++
 board/gateworks/gw_ventana/gsc.h            |   1 +
 board/gateworks/gw_ventana/gw_ventana.c     | 911
++++++------------------------------------------------------------------------------------------------------------
 board/gateworks/gw_ventana/gw_ventana_spl.c |  86 +++++------
 board/solidrun/hummingboard/Kconfig         |  15 --
 board/solidrun/hummingboard/MAINTAINERS     |   6 -
 board/solidrun/hummingboard/Makefile        |   9 --
 board/solidrun/hummingboard/README          |  40 -----
 board/solidrun/hummingboard/hummingboard.c  | 182 -----------------------
 board/solidrun/hummingboard/solo.cfg        |  25 ----
 board/solidrun/mx6cuboxi/README             |  10 +-
 board/solidrun/mx6cuboxi/mx6cuboxi.c        | 158 +++++++++++++++++++-
 board/tbs/tbs2910/tbs2910.c                 |  10 ++
 board/tqc/tqma6/tqma6.c                     |   2 +-
 board/warp/README                           |   4 +-
 configs/gwventana_defconfig                 |   2 +
 configs/hummingboard_solo_defconfig         |   3 -
 doc/README.mxc_hab                          |  12 +-
 drivers/i2c/mxc_i2c.c                       |  40 ++---
 drivers/pwm/pwm-imx-util.c                  |   2 +-
 include/configs/gw_ventana.h                |  22 ++-
 include/configs/hummingboard.h              | 224
----------------------------
 include/configs/mx6cuboxi.h                 |  43 +++++-
 include/configs/tbs2910.h                   |  21 ++-
 include/configs/tqma6.h                     |   7 +-
 tools/logos/solidrun.bmp                    | Bin 0 -> 5558 bytes
 42 files changed, 1390 insertions(+), 1522 deletions(-)
 create mode 100644 board/gateworks/gw_ventana/common.c
 create mode 100644 board/gateworks/gw_ventana/common.h
 delete mode 100644 board/solidrun/hummingboard/Kconfig
 delete mode 100644 board/solidrun/hummingboard/MAINTAINERS
 delete mode 100644 board/solidrun/hummingboard/Makefile
 delete mode 100644 board/solidrun/hummingboard/README
 delete mode 100644 board/solidrun/hummingboard/hummingboard.c
 delete mode 100644 board/solidrun/hummingboard/solo.cfg
 delete mode 100644 configs/hummingboard_solo_defconfig
 delete mode 100644 include/configs/hummingboard.h
 create mode 100644 tools/logos/solidrun.bmp

Comments

Tom Rini May 16, 2015, 11:36 a.m. UTC | #1
On Fri, May 15, 2015 at 05:18:26PM +0200, Stefano Babic wrote:

> Hi Tom,
> 
> please pull from u-boot-imx, thanks !
> 
> The following changes since commit ace97d26176a3ebc9ec07738450de93eea35975c:
> 
>   Merge branch 'zynq' of git://www.denx.de/git/u-boot-microblaze
> (2015-04-29 06:46:33 -0400)
> 
> are available in the git repository at:
> 
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to 6f63370510ebd7b6dfc83ef4cc6bfd448ecc5dc2:
> 
>   imx: ventana: use stack relocation (2015-05-15 16:42:14 +0200)
> 

This was updated a little bit more off-list and I've applied to
u-boot/master, thanks!