From patchwork Fri Jan 3 10:11:07 2014 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Michal Simek X-Patchwork-Id: 306549 X-Patchwork-Delegate: albert.aribaud@free.fr Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Received: from theia.denx.de (theia.denx.de [85.214.87.163]) by ozlabs.org (Postfix) with ESMTP id C937C2C0084 for ; Fri, 3 Jan 2014 21:15:38 +1100 (EST) Received: from localhost (localhost [127.0.0.1]) by theia.denx.de (Postfix) with ESMTP id ADF774AF33; Fri, 3 Jan 2014 11:15:32 +0100 (CET) X-Virus-Scanned: Debian amavisd-new at theia.denx.de Received: from theia.denx.de ([127.0.0.1]) by localhost (theia.denx.de [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id hfHH62YErctv; Fri, 3 Jan 2014 11:15:32 +0100 (CET) Received: from theia.denx.de (localhost [127.0.0.1]) by theia.denx.de (Postfix) with ESMTP id 047394AEB7; Fri, 3 Jan 2014 11:13:42 +0100 (CET) Received: from localhost (localhost [127.0.0.1]) by theia.denx.de (Postfix) with ESMTP id 9025C4AEBA for ; Fri, 3 Jan 2014 11:13:35 +0100 (CET) X-Virus-Scanned: Debian amavisd-new at theia.denx.de Received: from theia.denx.de ([127.0.0.1]) by localhost (theia.denx.de [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id cY-ui-kyP00t for ; Fri, 3 Jan 2014 11:13:31 +0100 (CET) X-policyd-weight: NOT_IN_SBL_XBL_SPAMHAUS=-1.5 NOT_IN_SPAMCOP=-1.5 BL_NJABL=ERR(-1.5) (only DNSBL check requested) Received: from mail-ea0-f170.google.com (mail-ea0-f170.google.com [209.85.215.170]) by theia.denx.de (Postfix) with ESMTPS id 4E8664AEC3 for ; Fri, 3 Jan 2014 11:12:14 +0100 (CET) Received: by mail-ea0-f170.google.com with SMTP id k10so6705427eaj.1 for ; Fri, 03 Jan 2014 02:12:14 -0800 (PST) X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20130820; h=x-gm-message-state:sender:from:to:cc:subject:date:message-id :in-reply-to:references:in-reply-to:references:content-type; bh=v8ckxdSpJJtJ6FYkEvs/cMRkMdiyAUK5osd1Hz4iajc=; b=R6j1YU52Qlrw+wpqYayhC9Z7DlJkd+0CLTl3ydDMR43WATASsbJTY/iuBSRYpKusx7 8YdBs3rnWYhXeH8ua6xCVx8QYtpBffYe5oklZji5A1Sg4b3Qghbr0BnQRb4rtFwIWilJ j4NdZMLPpm5M2XOuCEiz2GWipxgRB0BLisP8Gnj85xyg6+PaMaIha9LWe9Ku8rdDr7nm EbcWK4y0m8dNaQjEGnMsHmSD2AhnIukIU4txCV0bAFg4HzlZNj1U574ff89IsNX13bA8 y2oFJf9o76SqWXUPaue1r+77789QPmqMsbvqZeXT6ACgTjbZbu6bNZaJaKjMTn2htmVL vkDA== X-Gm-Message-State: ALoCoQkydf17lUYwLBjpjqEUstyYMFwrtU5vLNXEQzlhM56mYT7kTIoKYqck3xMTqVBh7HjJLQ1X X-Received: by 10.15.23.206 with SMTP id h54mr73820029eeu.17.1388743934723; Fri, 03 Jan 2014 02:12:14 -0800 (PST) Received: from localhost (nat-63.starnet.cz. [178.255.168.63]) by mx.google.com with ESMTPSA id a51sm143619948eeh.8.2014.01.03.02.12.13 for (version=TLSv1.1 cipher=RC4-SHA bits=128/128); Fri, 03 Jan 2014 02:12:13 -0800 (PST) From: Michal Simek To: Michal Simek , u-boot@lists.denx.de, Joe Hershberger , linux-arm-kernel@lists.infradead.org, Albert Aribaud , Tom Rini Date: Fri, 3 Jan 2014 11:11:07 +0100 Message-Id: <5327938ef156d7b495cc2203882670ad1410f0f2.1388743861.git.michal.simek@xilinx.com> X-Mailer: git-send-email 1.8.2.3 In-Reply-To: References: In-Reply-To: References: Cc: Jagannadha Sutradharudu Teki Subject: [U-Boot] [PATCH v1 22/24] dts: zynq: Add fdt support X-BeenThere: u-boot@lists.denx.de X-Mailman-Version: 2.1.11 Precedence: list List-Id: U-Boot discussion List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Sender: u-boot-bounces@lists.denx.de Errors-To: u-boot-bounces@lists.denx.de From: Jagannadha Sutradharudu Teki This patch provides a basic fdt support for zynq u-boot. zynq-generic.dts-> DTS for zc702 u-boot build: once configuring of a board done for building dtb with zynq-zed.dts as an input zynq-uboot> make DEVICE_TREE=zynq-zed Signed-off-by: Jagannadha Sutradharudu Teki Signed-off-by: Michal Simek --- Changes in v1: None board/xilinx/dts/zynq-generic.dts | 421 ++++++++++++++++++++++++++++++++++++++ board/xilinx/zynq/board.c | 28 +-- include/configs/zynq.h | 21 +- 3 files changed, 437 insertions(+), 33 deletions(-) create mode 100644 board/xilinx/dts/zynq-generic.dts -- 1.8.2.3 diff --git a/board/xilinx/dts/zynq-generic.dts b/board/xilinx/dts/zynq-generic.dts new file mode 100644 index 0000000..1524a6a --- /dev/null +++ b/board/xilinx/dts/zynq-generic.dts @@ -0,0 +1,421 @@ +/* + * Device Tree Generator version: 1.1 + * + * (C) Copyright 2007-2013 Xilinx, Inc. + * (C) Copyright 2007-2013 Michal Simek + * (C) Copyright 2007-2012 PetaLogix Qld Pty Ltd + * + * Michal SIMEK + * + * CAUTION: This file is automatically generated by libgen. + * Version: Xilinx EDK 14.5 EDK_P.58f + * + */ + +/dts-v1/; +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "xlnx,zynq-7000"; + model = "Xilinx Zynq"; + aliases { + ethernet0 = &ps7_ethernet_0; + i2c0 = &ps7_i2c_0; + serial0 = &ps7_uart_1; + spi0 = &ps7_qspi_0; + } ; + chosen { + bootargs = "console=ttyPS0,115200 root=/dev/ram rw earlyprintk"; + linux,stdout-path = "/amba@0/serial@e0001000"; + } ; + cpus { + #address-cells = <1>; + #size-cells = <0>; + ps7_cortexa9_0: cpu@0 { + bus-handle = <&ps7_axi_interconnect_0>; + compatible = "arm,cortex-a9"; + d-cache-line-size = <0x20>; + d-cache-size = <0x8000>; + device_type = "cpu"; + i-cache-line-size = <0x20>; + i-cache-size = <0x8000>; + interrupt-handle = <&ps7_scugic_0>; + reg = <0x0>; + } ; + ps7_cortexa9_1: cpu@1 { + bus-handle = <&ps7_axi_interconnect_0>; + compatible = "arm,cortex-a9"; + d-cache-line-size = <0x20>; + d-cache-size = <0x8000>; + device_type = "cpu"; + i-cache-line-size = <0x20>; + i-cache-size = <0x8000>; + interrupt-handle = <&ps7_scugic_0>; + reg = <0x1>; + } ; + } ; + pmu { + compatible = "arm,cortex-a9-pmu"; + interrupt-parent = <&ps7_scugic_0>; + interrupts = <0 5 4>, <0 6 4>; + reg = <0xf8891000 0x1000>, <0xf8893000 0x1000>; + reg-names = "cpu0", "cpu1"; + } ; + ps7_ddr_0: memory@0 { + device_type = "memory"; + reg = <0x0 0x40000000>; + } ; + ps7_axi_interconnect_0: amba@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "xlnx,ps7-axi-interconnect-1.00.a", "simple-bus"; + ranges ; + ps7_afi_0: ps7-afi@f8008000 { + compatible = "xlnx,ps7-afi-1.00.a"; + reg = <0xf8008000 0x1000>; + } ; + ps7_afi_1: ps7-afi@f8009000 { + compatible = "xlnx,ps7-afi-1.00.a"; + reg = <0xf8009000 0x1000>; + } ; + ps7_afi_2: ps7-afi@f800a000 { + compatible = "xlnx,ps7-afi-1.00.a"; + reg = <0xf800a000 0x1000>; + } ; + ps7_afi_3: ps7-afi@f800b000 { + compatible = "xlnx,ps7-afi-1.00.a"; + reg = <0xf800b000 0x1000>; + } ; + ps7_can_0: ps7-can@e0008000 { + clock-names = "ref_clk", "aper_clk"; + clocks = <&clkc 19>, <&clkc 36>; + compatible = "xlnx,ps7-can-1.00.a", "xlnx,ps7-can"; + interrupt-parent = <&ps7_scugic_0>; + interrupts = <0 28 4>; + reg = <0xe0008000 0x1000>; + } ; + ps7_ddrc_0: ps7-ddrc@f8006000 { + compatible = "xlnx,ps7-ddrc-1.00.a", "xlnx,ps7-ddrc"; + reg = <0xf8006000 0x1000>; + xlnx,has-ecc = <0x0>; + } ; + ps7_dev_cfg_0: ps7-dev-cfg@f8007000 { + clock-names = "ref_clk", "fclk0", "fclk1", "fclk2", "fclk3"; + clocks = <&clkc 12>, <&clkc 15>, <&clkc 16>, <&clkc 17>, <&clkc 18>; + compatible = "xlnx,ps7-dev-cfg-1.00.a"; + interrupt-parent = <&ps7_scugic_0>; + interrupts = <0 8 4>; + reg = <0xf8007000 0x100>; + } ; + ps7_dma_s: ps7-dma@f8003000 { + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <4>; + clock-names = "apb_pclk"; + clocks = <&clkc 27>; + compatible = "xlnx,ps7-dma-1.00.a", "arm,primecell", "arm,pl330"; + interrupt-names = "abort", "dma0", "dma1", "dma2", "dma3", + "dma4", "dma5", "dma6", "dma7"; + interrupt-parent = <&ps7_scugic_0>; + interrupts = <0 13 4>, <0 14 4>, <0 15 4>, <0 16 4>, <0 17 4>, <0 40 4>, <0 41 4>, <0 42 4>, <0 43 4>; + reg = <0xf8003000 0x1000>; + } ; + ps7_ethernet_0: ps7-ethernet@e000b000 { + #address-cells = <1>; + #size-cells = <0>; + clock-names = "ref_clk", "aper_clk"; + clocks = <&clkc 13>, <&clkc 30>; + compatible = "xlnx,ps7-ethernet-1.00.a"; + enet-reset = <&ps7_gpio_0 11 0>; + interrupt-parent = <&ps7_scugic_0>; + interrupts = <0 22 4>; + local-mac-address = [00 0a 35 00 00 00]; + phy-handle = <&phy0>; + phy-mode = "rgmii-id"; + reg = <0xe000b000 0x1000>; + xlnx,eth-mode = <0x1>; + xlnx,has-mdio = <0x1>; + xlnx,ptp-enet-clock = <111111115>; + mdio { + #address-cells = <1>; + #size-cells = <0>; + phy0: phy@7 { + compatible = "marvell,88e1116r"; + device_type = "ethernet-phy"; + reg = <7>; + } ; + } ; + } ; + ps7_gpio_0: ps7-gpio@e000a000 { + #gpio-cells = <2>; + clocks = <&clkc 42>; + compatible = "xlnx,ps7-gpio-1.00.a"; + emio-gpio-width = <64>; + gpio-controller ; + gpio-mask-high = <0x0>; + gpio-mask-low = <0x5600>; + interrupt-parent = <&ps7_scugic_0>; + interrupts = <0 20 4>; + reg = <0xe000a000 0x1000>; + } ; + ps7_i2c_0: ps7-i2c@e0004000 { + bus-id = <0>; + clocks = <&clkc 38>; + compatible = "xlnx,ps7-i2c-1.00.a"; + i2c-clk = <400000>; + i2c-reset = <&ps7_gpio_0 13 0>; + interrupt-parent = <&ps7_scugic_0>; + interrupts = <0 25 4>; + reg = <0xe0004000 0x1000>; + xlnx,has-interrupt = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + i2cswitch@74 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x74>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + si570: clock-generator@5d { + #clock-cells = <0>; + compatible = "silabs,si570"; + temperature-stability = <50>; + reg = <0x5d>; + factory-fout = <156250000>; + clock-frequency = <148500000>; + }; + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + eeprom@54 { + compatible = "at,24c08"; + reg = <0x54>; + }; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + gpio@21 { + compatible = "ti,tca6416"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + }; + }; + + i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + rtc@54 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; + }; + + i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + hwmon@52 { + compatible = "pmbus,ucd9248"; + reg = <52>; + }; + hwmon@53 { + compatible = "pmbus,ucd9248"; + reg = <53>; + }; + hwmon@54 { + compatible = "pmbus,ucd9248"; + reg = <54>; + }; + }; + }; + + } ; + ps7_iop_bus_config_0: ps7-iop-bus-config@e0200000 { + compatible = "xlnx,ps7-iop-bus-config-1.00.a"; + reg = <0xe0200000 0x1000>; + } ; + ps7_ocmc_0: ps7-ocmc@f800c000 { + compatible = "xlnx,ps7-ocmc-1.00.a", "xlnx,zynq-ocm-1.0"; + interrupt-parent = <&ps7_scugic_0>; + interrupts = <0 3 4>; + reg = <0xf800c000 0x1000>; + } ; + ps7_pl310_0: ps7-pl310@f8f02000 { + arm,data-latency = <3 2 2>; + arm,tag-latency = <2 2 2>; + cache-level = <2>; + cache-unified ; + compatible = "xlnx,ps7-pl310-1.00.a", "arm,pl310-cache"; + interrupt-parent = <&ps7_scugic_0>; + interrupts = <0 2 4>; + reg = <0xf8f02000 0x1000>; + } ; + ps7_qspi_0: ps7-qspi@e000d000 { + clock-names = "ref_clk", "aper_clk"; + clocks = <&clkc 10>, <&clkc 43>; + compatible = "xlnx,ps7-qspi-1.00.a"; + interrupt-parent = <&ps7_scugic_0>; + interrupts = <0 19 4>; + is-dual = <0>; + num-chip-select = <1>; + reg = <0xe000d000 0x1000>; + xlnx,fb-clk = <0x1>; + xlnx,qspi-mode = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + flash@0 { + compatible = "n25q128"; + reg = <0x0>; + spi-max-frequency = <50000000>; + #address-cells = <1>; + #size-cells = <1>; + partition@qspi-fsbl-uboot { + label = "qspi-fsbl-uboot"; + reg = <0x0 0x100000>; + }; + partition@qspi-linux { + label = "qspi-linux"; + reg = <0x100000 0x500000>; + }; + partition@qspi-device-tree { + label = "qspi-device-tree"; + reg = <0x600000 0x20000>; + }; + partition@qspi-rootfs { + label = "qspi-rootfs"; + reg = <0x620000 0x5E0000>; + }; + partition@qspi-bitstream { + label = "qspi-bitstream"; + reg = <0xC00000 0x400000>; + }; + }; + + } ; + ps7_qspi_linear_0: ps7-qspi-linear@fc000000 { + clock-names = "ref_clk", "aper_clk"; + clocks = <&clkc 10>, <&clkc 43>; + compatible = "xlnx,ps7-qspi-linear-1.00.a"; + reg = <0xfc000000 0x1000000>; + } ; + ps7_scugic_0: ps7-scugic@f8f01000 { + #address-cells = <2>; + #interrupt-cells = <3>; + #size-cells = <1>; + compatible = "xlnx,ps7-scugic-1.00.a", "arm,cortex-a9-gic", "arm,gic"; + interrupt-controller ; + num_cpus = <2>; + num_interrupts = <96>; + reg = <0xf8f01000 0x1000>, <0xf8f00100 0x100>; + } ; + ps7_scutimer_0: ps7-scutimer@f8f00600 { + clocks = <&clkc 4>; + compatible = "xlnx,ps7-scutimer-1.00.a", "arm,cortex-a9-twd-timer"; + interrupt-parent = <&ps7_scugic_0>; + interrupts = <1 13 0x301>; + reg = <0xf8f00600 0x20>; + } ; + ps7_scuwdt_0: ps7-scuwdt@f8f00620 { + clocks = <&clkc 4>; + compatible = "xlnx,ps7-scuwdt-1.00.a"; + device_type = "watchdog"; + interrupt-parent = <&ps7_scugic_0>; + interrupts = <1 14 0x301>; + reg = <0xf8f00620 0xe0>; + } ; + ps7_sd_0: ps7-sdio@e0100000 { + clock-frequency = <50000000>; + clock-names = "clk_xin", "clk_ahb"; + clocks = <&clkc 21>, <&clkc 32>; + compatible = "xlnx,ps7-sdio-1.00.a", "generic-sdhci", "arasan,sdhci-8.9a"; + interrupt-parent = <&ps7_scugic_0>; + interrupts = <0 24 4>; + reg = <0xe0100000 0x1000>; + xlnx,has-cd = <0x1>; + xlnx,has-power = <0x0>; + xlnx,has-wp = <0x1>; + } ; + ps7_slcr_0: ps7-slcr@f8000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "xlnx,ps7-slcr-1.00.a", "xlnx,zynq-slcr", "syscon"; + reg = <0xf8000000 0x1000>; + clkc: clkc@100 { + #clock-cells = <1>; + clock-output-names = "armpll", "ddrpll", "iopll", "cpu_6or4x", "cpu_3or2x", + "cpu_2x", "cpu_1x", "ddr2x", "ddr3x", "dci", + "lqspi", "smc", "pcap", "gem0", "gem1", + "fclk0", "fclk1", "fclk2", "fclk3", "can0", + "can1", "sdio0", "sdio1", "uart0", "uart1", + "spi0", "spi1", "dma", "usb0_aper", "usb1_aper", + "gem0_aper", "gem1_aper", "sdio0_aper", "sdio1_aper", "spi0_aper", + "spi1_aper", "can0_aper", "can1_aper", "i2c0_aper", "i2c1_aper", + "uart0_aper", "uart1_aper", "gpio_aper", "lqspi_aper", "smc_aper", + "swdt", "dbg_trc", "dbg_apb"; + compatible = "xlnx,ps7-clkc"; + fclk-enable = <0xf>; + ps-clk-frequency = <33333333>; + reg = <0x100 0x100>; + } ; + } ; + ps7_ttc_0: ps7-ttc@f8001000 { + clocks = <&clkc 6>; + compatible = "xlnx,ps7-ttc-1.00.a", "cdns,ttc"; + interrupt-names = "ttc0", "ttc1", "ttc2"; + interrupt-parent = <&ps7_scugic_0>; + interrupts = <0 10 4>, <0 11 4>, <0 12 4>; + reg = <0xf8001000 0x1000>; + } ; + ps7_uart_1: serial@e0001000 { + clock-names = "ref_clk", "aper_clk"; + clocks = <&clkc 24>, <&clkc 41>; + compatible = "xlnx,ps7-uart-1.00.a", "xlnx,xuartps"; + current-speed = <115200>; + device_type = "serial"; + interrupt-parent = <&ps7_scugic_0>; + interrupts = <0 50 4>; + port-number = <0>; + reg = <0xe0001000 0x1000>; + xlnx,has-modem = <0x0>; + } ; + ps7_usb_0: ps7-usb@e0002000 { + clocks = <&clkc 28>; + compatible = "xlnx,ps7-usb-1.00.a"; + dr_mode = "host"; + interrupt-parent = <&ps7_scugic_0>; + interrupts = <0 21 4>; + phy_type = "ulpi"; + reg = <0xe0002000 0x1000>; + usb-reset = <&ps7_gpio_0 7 0>; + } ; + ps7_wdt_0: ps7-wdt@f8005000 { + clocks = <&clkc 45>; + compatible = "xlnx,ps7-wdt-1.00.a"; + device_type = "watchdog"; + interrupt-parent = <&ps7_scugic_0>; + interrupts = <0 9 1>; + reg = <0xf8005000 0x1000>; + reset = <0>; + timeout = <10>; + } ; + ps7_xadc: ps7-xadc@f8007100 { + clocks = <&clkc 12>; + compatible = "xlnx,ps7-xadc-1.00.a"; + interrupt-parent = <&ps7_scugic_0>; + interrupts = <0 7 4>; + reg = <0xf8007100 0x20>; + } ; + } ; +} ; diff --git a/board/xilinx/zynq/board.c b/board/xilinx/zynq/board.c index 6629b20..139e48c 100644 --- a/board/xilinx/zynq/board.c +++ b/board/xilinx/zynq/board.c @@ -95,28 +95,13 @@ int board_eth_init(bd_t *bis) ret |= xilinx_axiemac_initialize(bis, XILINX_AXIEMAC_BASEADDR, XILINX_AXIDMA_BASEADDR); #endif + #ifdef CONFIG_XILINX_EMACLITE - u32 txpp = 0; - u32 rxpp = 0; -# ifdef CONFIG_XILINX_EMACLITE_TX_PING_PONG - txpp = 1; -# endif -# ifdef CONFIG_XILINX_EMACLITE_RX_PING_PONG - rxpp = 1; -# endif - ret |= xilinx_emaclite_initialize(bis, XILINX_EMACLITE_BASEADDR, - txpp, rxpp); + xilinx_emaclite_of_init(gd->fdt_blob); #endif #if defined(CONFIG_ZYNQ_GEM) -# if defined(CONFIG_ZYNQ_GEM0) - ret |= zynq_gem_initialize(bis, ZYNQ_GEM_BASEADDR0, - CONFIG_ZYNQ_GEM_PHY_ADDR0, 0); -# endif -# if defined(CONFIG_ZYNQ_GEM1) - ret |= zynq_gem_initialize(bis, ZYNQ_GEM_BASEADDR1, - CONFIG_ZYNQ_GEM_PHY_ADDR1, 0); -# endif + zynq_gem_of_init(gd->fdt_blob); #endif return ret; } @@ -128,12 +113,7 @@ int board_mmc_init(bd_t *bd) int ret = 0; #if defined(CONFIG_ZYNQ_SDHCI) -# if defined(CONFIG_ZYNQ_SDHCI0) - ret = zynq_sdhci_init(ZYNQ_SDHCI_BASEADDR0); -# endif -# if defined(CONFIG_ZYNQ_SDHCI1) - ret |= zynq_sdhci_init(ZYNQ_SDHCI_BASEADDR1); -# endif + ret = zynq_sdhci_of_init(gd->fdt_blob); #endif return ret; } diff --git a/include/configs/zynq.h b/include/configs/zynq.h index 5e7adc2..b21e060 100644 --- a/include/configs/zynq.h +++ b/include/configs/zynq.h @@ -37,16 +37,14 @@ # define CONFIG_ARM_DCC # define CONFIG_CPU_V6 /* Required by CONFIG_ARM_DCC */ #else -# define CONFIG_ZYNQ_SERIAL_BASEADDR1 # define CONFIG_ZYNQ_SERIAL #endif +#define CONFIG_ZYNQ_GEM + /* Ethernet driver */ -#define CONFIG_ZYNQ_GEM0 -#define CONFIG_ZYNQ_GEM_PHY_ADDR0 7 -#if defined(CONFIG_ZYNQ_GEM0) || defined(CONFIG_ZYNQ_GEM1) +#ifdef CONFIG_ZYNQ_GEM # define CONFIG_NET_MULTI -# define CONFIG_ZYNQ_GEM # define CONFIG_MII # define CONFIG_SYS_FAULT_ECHO_LINK_DOWN # define CONFIG_PHYLIB @@ -64,13 +62,13 @@ /* NOR */ #define CONFIG_SYS_NO_FLASH -#define CONFIG_ZYNQ_SDHCI0 +#define CONFIG_ZYNQ_SDHCI + /* MMC */ -#if defined(CONFIG_ZYNQ_SDHCI0) || defined(CONFIG_ZYNQ_SDHCI1) +#if defined(CONFIG_ZYNQ_SDHCI) # define CONFIG_MMC # define CONFIG_GENERIC_MMC # define CONFIG_SDHCI -# define CONFIG_ZYNQ_SDHCI # define CONFIG_CMD_MMC # define CONFIG_CMD_FAT # define CONFIG_SUPPORT_VFAT @@ -165,7 +163,6 @@ #define CONFIG_NR_DRAM_BANKS 1 #define CONFIG_SYS_SDRAM_BASE 0 -#define CONFIG_SYS_SDRAM_SIZE 0x40000000 #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x1000) @@ -190,6 +187,12 @@ #define CONFIG_FIT #define CONFIG_FIT_VERBOSE 1 /* enable fit_format_{error,warning}() */ +/* FDT support */ +#define CONFIG_OF_CONTROL +#define CONFIG_OF_EMBED +#define CONFIG_DISPLAY_BOARDINFO_LATE +#define CONFIG_DEFAULT_DEVICE_TREE "zynq-generic" + /* Boot FreeBSD/vxWorks from an ELF image */ #if defined(CONFIG_ZYNQ_BOOT_FREEBSD) # define CONFIG_API