mbox

[U-Boot,PULL] : Please pull u-boot-imx

Message ID 50E864B2.2020706@denx.de
State Accepted
Delegated to: Albert ARIBAUD
Headers show

Pull-request

git://www.denx.de/git/u-boot-imx.git master

Message

Stefano Babic Jan. 5, 2013, 5:36 p.m. UTC
Hi Albert,

please pull from u-boot-imx, thanks.

The following changes since commit b874df74afc986b069738b180763f2464ac3f5f4:

  mx25pdk: Allow booting a device tree kernel (2012-12-13 09:23:59 +0100)

are available in the git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to 1411fb37b5a8d56bececc5e6ea09d2e0670b9810:

  tools: imximage: Load a size that is multiple of 512 (2013-01-05
18:09:00 +0100)

----------------------------------------------------------------
Ashok (1):
      mx35pdk:Use IMX_GPIO_NR macro

Fabio Estevam (6):
      mx35pdk: Allow booting of a device tree kernel
      mx53loco: Call PMIC related functions from board_late_init()
      mx51evk: Remove unneeded comment
      mx53loco: Remove unneeded 'retval' variable
      mx53loco: Improve error handling on power_init()
      tools: imximage: Load a size that is multiple of 512

Marek Vasut (1):
      mxs: Add NAND fdt and ramdisk partition to m28evk

Otavio Salvador (4):
      mx53loco: We shouldn't hardcode a rootfs filesystem type
      mx53loco: Change default loadaddr to 0x72000000
      mx6qsabrelite: Change default loadaddr to 0x12000000
      mx6qsabre_common: Change default loadaddr to 0x12000000

Shawn Guo (3):
      fsl_esdhc: add MMC_MODE_HC host_caps
      mx6qsabresd: add usdhc2 and usdhc4 support
      mx6qsabresd: use on-board eMMC to store environment

 board/freescale/mx35pdk/mx35pdk.c         |    2 +-
 board/freescale/mx53loco/mx53loco.c       |   84
++++++++++++++++++++++-------
 board/freescale/mx6qsabresd/mx6qsabresd.c |   80
++++++++++++++++++++++++---
 drivers/mmc/fsl_esdhc.c                   |    2 +-
 include/configs/m28evk.h                  |    2 +
 include/configs/mx35pdk.h                 |    1 +
 include/configs/mx51evk.h                 |    4 --
 include/configs/mx53loco.h                |   10 ++--
 include/configs/mx6qsabre_common.h        |    4 +-
 include/configs/mx6qsabreauto.h           |    5 ++
 include/configs/mx6qsabrelite.h           |    2 +-
 include/configs/mx6qsabresd.h             |    6 +++
 include/image.h                           |    3 ++
 tools/imximage.c                          |    9 +++-
 14 files changed, 172 insertions(+), 42 deletions(-)

Comments

Albert ARIBAUD Jan. 8, 2013, 2:50 p.m. UTC | #1
Hi Stefano,

On Sat, 05 Jan 2013 18:36:50 +0100, Stefano Babic <sbabic@denx.de>
wrote:

> Hi Albert,
> 
> please pull from u-boot-imx, thanks.
> 
> The following changes since commit b874df74afc986b069738b180763f2464ac3f5f4:
> 
>   mx25pdk: Allow booting a device tree kernel (2012-12-13 09:23:59 +0100)
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to 1411fb37b5a8d56bececc5e6ea09d2e0670b9810:
> 
>   tools: imximage: Load a size that is multiple of 512 (2013-01-05
> 18:09:00 +0100)
> 
> ----------------------------------------------------------------
> Ashok (1):
>       mx35pdk:Use IMX_GPIO_NR macro
> 
> Fabio Estevam (6):
>       mx35pdk: Allow booting of a device tree kernel
>       mx53loco: Call PMIC related functions from board_late_init()
>       mx51evk: Remove unneeded comment
>       mx53loco: Remove unneeded 'retval' variable
>       mx53loco: Improve error handling on power_init()
>       tools: imximage: Load a size that is multiple of 512
> 
> Marek Vasut (1):
>       mxs: Add NAND fdt and ramdisk partition to m28evk
> 
> Otavio Salvador (4):
>       mx53loco: We shouldn't hardcode a rootfs filesystem type
>       mx53loco: Change default loadaddr to 0x72000000
>       mx6qsabrelite: Change default loadaddr to 0x12000000
>       mx6qsabre_common: Change default loadaddr to 0x12000000
> 
> Shawn Guo (3):
>       fsl_esdhc: add MMC_MODE_HC host_caps
>       mx6qsabresd: add usdhc2 and usdhc4 support
>       mx6qsabresd: use on-board eMMC to store environment
> 
>  board/freescale/mx35pdk/mx35pdk.c         |    2 +-
>  board/freescale/mx53loco/mx53loco.c       |   84
> ++++++++++++++++++++++-------
>  board/freescale/mx6qsabresd/mx6qsabresd.c |   80
> ++++++++++++++++++++++++---
>  drivers/mmc/fsl_esdhc.c                   |    2 +-
>  include/configs/m28evk.h                  |    2 +
>  include/configs/mx35pdk.h                 |    1 +
>  include/configs/mx51evk.h                 |    4 --
>  include/configs/mx53loco.h                |   10 ++--
>  include/configs/mx6qsabre_common.h        |    4 +-
>  include/configs/mx6qsabreauto.h           |    5 ++
>  include/configs/mx6qsabrelite.h           |    2 +-
>  include/configs/mx6qsabresd.h             |    6 +++
>  include/image.h                           |    3 ++
>  tools/imximage.c                          |    9 +++-
>  14 files changed, 172 insertions(+), 42 deletions(-)
> 

Applied to u-boot-arm/master, thanks!

Amicalement,