diff mbox

[U-Boot,v2] TRATS: initialize panel_info data structure in board file

Message ID 4F9888E3.3020502@samsung.com
State Accepted
Delegated to: Minkyu Kang
Headers show

Commit Message

Donghwa Lee April 25, 2012, 11:29 p.m. UTC
panel_info data structure is gloable variable, so, I have initialized it
in board file. If it is initialized in init_panel_info() like existing,
it can't be used in drv_lcd_init() in common/lcd.c because
init_panel_info() is called after drv_lcd_init().

change of v1:
 - I had made a mistake that must do not included variables of vidinfo_t
data structure was included in the file. So, I removed it.

Signed-off-by: Donghwa Lee <dh09.lee@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
---
 board/samsung/trats/trats.c |   71 ++++++++++++++++++++++---------------------
 drivers/video/exynos_fb.c   |    3 --
 2 files changed, 36 insertions(+), 38 deletions(-)

Comments

Anatolij Gustschin April 26, 2012, 7:59 a.m. UTC | #1
Hi,

On Thu, 26 Apr 2012 08:29:39 +0900
Donghwa Lee <dh09.lee@samsung.com> wrote:

> panel_info data structure is gloable variable, so, I have initialized it
> in board file. If it is initialized in init_panel_info() like existing,
> it can't be used in drv_lcd_init() in common/lcd.c because
> init_panel_info() is called after drv_lcd_init().
> 
> change of v1:
>  - I had made a mistake that must do not included variables of vidinfo_t
> data structure was included in the file. So, I removed it.
> 
> Signed-off-by: Donghwa Lee <dh09.lee@samsung.com>
> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
> ---
>  board/samsung/trats/trats.c |   71 ++++++++++++++++++++++---------------------
>  drivers/video/exynos_fb.c   |    3 --
>  2 files changed, 36 insertions(+), 38 deletions(-)

Acked-by: Anatolij Gustschin <agust@denx.de>

This patch should also go through u-boot-samsung tree.

Thanks,
Anatolij
Minkyu Kang May 2, 2012, 7:45 a.m. UTC | #2
On 26 April 2012 16:59, Anatolij Gustschin <agust@denx.de> wrote:
> Hi,
>
> On Thu, 26 Apr 2012 08:29:39 +0900
> Donghwa Lee <dh09.lee@samsung.com> wrote:
>
>> panel_info data structure is gloable variable, so, I have initialized it
>> in board file. If it is initialized in init_panel_info() like existing,
>> it can't be used in drv_lcd_init() in common/lcd.c because
>> init_panel_info() is called after drv_lcd_init().
>>
>> change of v1:
>>  - I had made a mistake that must do not included variables of vidinfo_t
>> data structure was included in the file. So, I removed it.
>>
>> Signed-off-by: Donghwa Lee <dh09.lee@samsung.com>
>> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
>> ---
>>  board/samsung/trats/trats.c |   71 ++++++++++++++++++++++---------------------
>>  drivers/video/exynos_fb.c   |    3 --
>>  2 files changed, 36 insertions(+), 38 deletions(-)
>
> Acked-by: Anatolij Gustschin <agust@denx.de>
>

applied to u-boot-samsung.

Thanks.
Minkyu Kang.
diff mbox

Patch

diff --git a/board/samsung/trats/trats.c b/board/samsung/trats/trats.c
index 3085de1..084b67a 100644
--- a/board/samsung/trats/trats.c
+++ b/board/samsung/trats/trats.c
@@ -455,43 +455,44 @@  static int mipi_power(void)
 	return 0;
 }
 
+vidinfo_t panel_info = {
+	.vl_freq	= 60,
+	.vl_col		= 720,
+	.vl_row		= 1280,
+	.vl_width	= 720,
+	.vl_height	= 1280,
+	.vl_clkp	= CONFIG_SYS_HIGH,
+	.vl_hsp		= CONFIG_SYS_LOW,
+	.vl_vsp		= CONFIG_SYS_LOW,
+	.vl_dp		= CONFIG_SYS_LOW,
+	.vl_bpix	= 5,	/* Bits per pixel, 2^5 = 32 */
+
+	/* s6e8ax0 Panel infomation */
+	.vl_hspw	= 5,
+	.vl_hbpd	= 10,
+	.vl_hfpd	= 10,
+
+	.vl_vspw	= 2,
+	.vl_vbpd	= 1,
+	.vl_vfpd	= 13,
+	.vl_cmd_allow_len = 0xf,
+
+	.win_id		= 3,
+	.cfg_gpio	= NULL,
+	.backlight_on	= NULL,
+	.lcd_power_on	= NULL,	/* lcd_power_on in mipi dsi driver */
+	.reset_lcd	= lcd_reset,
+	.dual_lcd_enabled = 0,
+
+	.init_delay	= 0,
+	.power_on_delay = 0,
+	.reset_delay	= 0,
+	.interface_mode = FIMD_RGB_INTERFACE,
+	.mipi_enabled	= 1,
+};
+
 void init_panel_info(vidinfo_t *vid)
 {
-	vid->vl_freq	= 60;
-	vid->vl_col	= 720;
-	vid->vl_row	= 1280;
-	vid->vl_width	= 720;
-	vid->vl_height	= 1280;
-	vid->vl_clkp	= CONFIG_SYS_HIGH;
-	vid->vl_hsp	= CONFIG_SYS_LOW;
-	vid->vl_vsp	= CONFIG_SYS_LOW;
-	vid->vl_dp	= CONFIG_SYS_LOW;
-
-	vid->vl_bpix	= 5;
-	vid->dual_lcd_enabled = 0;
-
-	/* s6e8ax0 Panel */
-	vid->vl_hspw	= 5;
-	vid->vl_hbpd	= 10;
-	vid->vl_hfpd	= 10;
-
-	vid->vl_vspw	= 2;
-	vid->vl_vbpd	= 1;
-	vid->vl_vfpd	= 13;
-	vid->vl_cmd_allow_len = 0xf;
-
-	vid->win_id = 3;
-	vid->cfg_gpio = NULL;
-	vid->backlight_on = NULL;
-	vid->lcd_power_on = NULL;	/* lcd_power_on in mipi dsi driver */
-	vid->reset_lcd = lcd_reset;
-
-	vid->init_delay = 0;
-	vid->power_on_delay = 0;
-	vid->reset_delay = 0;
-	vid->interface_mode = FIMD_RGB_INTERFACE;
-	vid->mipi_enabled = 1;
-
 	strcpy(s6e8ax0_platform_data.lcd_panel_name, mipi_lcd_device.name);
 	s6e8ax0_platform_data.lcd_power = lcd_power;
 	s6e8ax0_platform_data.mipi_power = mipi_power;
diff --git a/drivers/video/exynos_fb.c b/drivers/video/exynos_fb.c
index a1cf449..96a8ec1 100644
--- a/drivers/video/exynos_fb.c
+++ b/drivers/video/exynos_fb.c
@@ -44,9 +44,6 @@  short console_row;
 
 static unsigned int panel_width, panel_height;
 
-/* LCD Panel data */
-vidinfo_t panel_info;
-
 static void exynos_lcd_init_mem(void *lcdbase, vidinfo_t *vid)
 {
 	unsigned long palette_size;