diff --git a/cpu/arm926ejs/davinci/Makefile b/cpu/arm926ejs/davinci/Makefile
index 0b6cbd2..f39a2ad 100644
--- a/cpu/arm926ejs/davinci/Makefile
+++ b/cpu/arm926ejs/davinci/Makefile
@@ -29,6 +29,7 @@ LIB   = $(obj)lib$(SOC).a

  COBJS  = timer.o ether.o lxt972.o dp83848.o i2c.o nand.o
  COBJS  += realtek.o
+COBJS  += marvell.o
  SOBJS  = lowlevel_init.o reset.o

  SRCS   := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
diff --git a/cpu/arm926ejs/davinci/ether.c b/cpu/arm926ejs/davinci/ether.c
index 09fe24e..4e4a606 100644
--- a/cpu/arm926ejs/davinci/ether.c
+++ b/cpu/arm926ejs/davinci/ether.c
@@ -406,6 +406,14 @@ static int davinci_eth_hw_init(void)
                         phy.get_link_speed = rtl8201_get_link_speed;
                         phy.auto_negotiate = rtl8201_auto_negotiate;
                         break;
+               case PHY_MARVEL88E1111:
+                       sprintf(phy.name, "MARVELL88E1111 @ 0x%02x",
+                               active_phy_addr);
+                       phy.init = marvell88e1111_init_phy;
+                       phy.is_phy_connected = 
marvell88e1111_is_phy_connected;
+                       phy.get_link_speed = marvell88e1111_get_link_speed;
+                       phy.auto_negotiate = marvell88e1111_auto_negotiate;
+                       break;
                 default:
                         sprintf(phy.name, "GENERIC @ 0x%02x", 
active_phy_addr);
                         phy.init = gen_init_phy;
@@ -416,6 +424,12 @@ static int davinci_eth_hw_init(void)

         printf("Ethernet PHY: %s\n", phy.name);

+       /* disable 1000Mb/s autonegotiation */
+       if (PHY_MARVEL88E1111 == phy_id) {
+               if (!phy.init(active_phy_addr))
+                       return(0);
+       }
+
         return(1);
  }
diff --git a/cpu/arm926ejs/davinci/marvell.c 
b/cpu/arm926ejs/davinci/marvell.c
new file mode 100644
index 0000000..6918bef
--- /dev/null
+++ b/cpu/arm926ejs/davinci/marvell.c
@@ -0,0 +1,189 @@
+/*
+ * Marvel 88E1111 Driver for TI DaVinci (TMS320DM635) based boards.
+ *
+ * Copyright (C) 2011 Brilliantov Kirill Vladimirovich 
<brilliantov@byterg.ru>
+ * References: 88E1111 Datasheet Integrated 10/100/1000
+ *              Ultra Gigabit Ethernet Transceiver
+ *             Doc. No. MV-S100649-00, Rev. F
+ *             December, 3, 2004
+ * --------------------------------------------------------
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <net.h>
+#include <miiphy.h>
+#include <asm/arch/emac_defs.h>
+
+#ifdef CONFIG_DRIVER_TI_EMAC
+
+#ifdef CONFIG_CMD_NET
+
+#define DEBUG          0
+#define DBG(f, a...)   \
+    do {\
+       if (DEBUG) \
+               printf("Marvell: " f "\n", ##a);\
+    } while (0)
+#define ERR(f, a...)   printf("Marvell: %s: " f "\n", __func__, ##a)
+
+#define LINK_DOWN                              (0 << 2)
+#define EXTENDED_PHY_SPECIFIC_STATUS_REGISTER  27
+
+int marvell88e1111_is_phy_connected(int phy_addr)
+{
+       u_int16_t id1, id2;
+
+       DBG("starting %s", __func__);
+
+       if (!davinci_eth_phy_read(phy_addr, PHY_PHYIDR1, &id1)) {
+               ERR("can't read PHY_PHYIDR1 register %#x", PHY_PHYIDR1);
+               return (0);
+       }
+
+       if (!davinci_eth_phy_read(phy_addr, PHY_PHYIDR2, &id2)) {
+               ERR("can't read PHY_PHYIDR2 register %#x", PHY_PHYIDR2);
+               return (0);
+       }
+
+       DBG("ID1 %#x, ID2 %#x\n", id1, id2);
+
+       if ((id1 == 0x141) && ((id2 & 0xFFF0) == 0x0CC0))
+               return (1);
+
+       ERR("ID1 or ID2 not corrected");
+
+       return (0);
+}
+
+int marvell88e1111_get_link_speed(int phy_addr)
+{
+       u_int16_t val;
+       volatile emac_regs *emac = (emac_regs *) EMAC_BASE_ADDR;
+
+       DBG("starting %s", __func__);
+
+       if (!davinci_eth_phy_read(phy_addr, PHY_BMSR, &val)) {
+               ERR("can't read PHY_BMSR register %#x", PHY_BMSR);
+               return (0);
+       }
+
+       if (val & LINK_DOWN) {
+               ERR("link down");
+               return (0);
+       }
+       DBG("link up");
+
+       if (!davinci_eth_phy_read(phy_addr, PHY_BMCR, &val)) {
+               ERR("can't read PHY_BMCR register %#x", PHY_BMCR);
+               return (0);
+       }
+
+       if (val & PHY_BMCR_DPLX) {
+               DBG("set emac full duplex mode");
+               emac->MACCONTROL = EMAC_MACCONTROL_MIIEN_ENABLE |
+                   EMAC_MACCONTROL_FULLDUPLEX_ENABLE;
+       } else {
+               DBG("set emac half duplex mode");
+               emac->MACCONTROL = EMAC_MACCONTROL_MIIEN_ENABLE;
+       }
+
+       return (1);
+}
+
+int marvell88e1111_init_phy(int phy_addr)
+{
+       int ret = 1;
+
+       DBG("starting %s\n", __func__);
+
+#if defined(CFG_DM365_EVM) || defined(CFG_DM365_IPNC) || 
defined(CFG_DM368_IPNC)
+       u_int16_t tmp;
+
+       if (!davinci_eth_phy_read(phy_addr,
+                   EXTENDED_PHY_SPECIFIC_STATUS_REGISTER, &tmp)) {
+               ERR("can't read Extended PHY Status register %#x",
+                   EXTENDED_PHY_SPECIFIC_STATUS_REGISTER);
+               return (0);
+       }
+       if (!davinci_eth_phy_write(phy_addr,
+                   EXTENDED_PHY_SPECIFIC_STATUS_REGISTER, tmp | 0xF)) {
+               ERR("can't set GMII to cooper mode");
+               return (0);
+       }
+       DBG("hardware configred set in GMII to cooper mode");
+
+       if (!marvell88e1111_auto_negotiate(phy_addr))
+               ret = marvell88e1111_auto_negotiate(phy_addr);
+#else
+       if (!marvell88e1111_get_link_speed(phy_addr))
+               ret = marvell88e1111_get_link_speed(phy_addr);
+#endif
+
+       return (ret);
+}
+
+int marvell88e1111_auto_negotiate(int phy_addr)
+{
+       u_int16_t tmp;
+
+       DBG("starting %s", __func__);
+
+#if defined(CFG_DM365_EVM) || defined(CFG_DM365_IPNC) || 
defined(CFG_DM368_IPNC)
+       /* disable autonegotiation 1000Mb/s */
+       if (!davinci_eth_phy_read(phy_addr, PHY_1000BTCR, &tmp)) {
+               ERR("can't read PHY_1000BTCR register %#x", PHY_1000BTCR);
+               return (0);
+       }
+       if (!davinci_eth_phy_write(phy_addr, PHY_1000BTCR,
+                   tmp & (~(PHY_1000BTCR_1000FD | PHY_1000BTCR_1000HD)))) {
+               ERR("can't disable 1000Mb/s autonegotiation");
+               return (0);
+       }
+       DBG("1000Mb/s autonegotiation disabled");
+#endif
+
+       if (!davinci_eth_phy_read(phy_addr, PHY_BMCR, &tmp)) {
+               ERR("can't read PHY_BMCR register %#x", PHY_BMCR);
+               return (0);
+       }
+
+       tmp |= (PHY_BMCR_AUTON | PHY_BMCR_RST_NEG | PHY_BMCR_RESET);
+       davinci_eth_phy_write(phy_addr, PHY_BMCR, tmp);
+
+       udelay(10000);
+       if (!davinci_eth_phy_read(phy_addr, PHY_BMSR, &tmp)) {
+               ERR("can't read PHY_BMSR register %#x", PHY_BMSR);
+               return (0);
+       }
+
+       if (tmp & PHY_BMSR_AUTN_COMP)
+               DBG("autonegotiation completed");
+       else {
+               ERR("autonegotiation not completed");
+               return (0);
+       }
+
+       return (marvell88e1111_get_link_speed(phy_addr));
+}
+
+#endif /* CONFIG_CMD_NET */
+
+#endif /* CONFIG_DRIVER_ETHER */
diff --git a/include/asm-arm/arch-davinci/emac_defs.h 
b/include/asm-arm/arch-davinci/emac_defs.h
index fafbce4..b0aca7c 100644
--- a/include/asm-arm/arch-davinci/emac_defs.h
+++ b/include/asm-arm/arch-davinci/emac_defs.h
@@ -349,4 +349,10 @@ int rtl8201_get_link_speed(int phy_addr);
  int rtl8201_init_phy(int phy_addr);
  int rtl8201_auto_negotiate(int phy_addr);

+#define PHY_MARVEL88E1111 (0x1410CC2)
+int marvell88e1111_is_phy_connected(int phy_addr);
+int marvell88e1111_get_link_speed(int phy_addr);
+int marvell88e1111_init_phy(int phy_addr);
+int marvell88e1111_auto_negotiate(int phy_addr);
+
  #endif  /* _DM644X_EMAC_H_ */
