| Message ID | 215bc936e36f88d2e7c4422ec68cad6d40cb8f68.1645624892.git.michal.simek@xilinx.com |
|---|---|
| State | Accepted |
| Commit | 2569b51e324e451739c0dd293ff40643914f34e9 |
| Delegated to: | Michal Simek |
| Headers | show |
| Series | Revert "board: zynqmp: Fix for wrong AMS setting by ROM" | expand |
st 23. 2. 2022 v 15:01 odesÃlatel Michal Simek <michal.simek@xilinx.com> napsal: > > From: T Karthik Reddy <t.karthik.reddy@xilinx.com> > > This reverts commit dfbe492edef421de09617dc26805fc428440924e. > Analog bus control register should be programmed in SPL only. This commit > 3414712ba8a ("arm64: zynqmp: Writing correct value to ANALOG_BUS") is > programming the same. So revert this commit. > > Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> > Signed-off-by: Michal Simek <michal.simek@xilinx.com> > --- > > board/xilinx/zynqmp/zynqmp.c | 6 ------ > 1 file changed, 6 deletions(-) > > diff --git a/board/xilinx/zynqmp/zynqmp.c b/board/xilinx/zynqmp/zynqmp.c > index 70b3c81f1284..bc2090941d90 100644 > --- a/board/xilinx/zynqmp/zynqmp.c > +++ b/board/xilinx/zynqmp/zynqmp.c > @@ -399,9 +399,6 @@ static void print_secure_boot(void) > status & ZYNQMP_CSU_STATUS_ENCRYPTED ? "" : "not "); > } > > -#define PS_SYSMON_ANALOG_BUS_VAL 0x3210 > -#define PS_SYSMON_ANALOG_BUS_REG 0xFFA50914 > - > int board_init(void) > { > #if defined(CONFIG_ZYNQMP_FIRMWARE) > @@ -429,9 +426,6 @@ int board_init(void) > > printf("EL Level:\tEL%d\n", current_el()); > > - /* Bug in ROM sets wrong value in this register */ > - writel(PS_SYSMON_ANALOG_BUS_VAL, PS_SYSMON_ANALOG_BUS_REG); > - > #if CONFIG_IS_ENABLED(FPGA) && defined(CONFIG_FPGA_ZYNQMPPL) > zynqmppl.name = zynqmp_get_silicon_idcode_name(); > printf("Chip ID:\t%s\n", zynqmppl.name); > -- > 2.35.1 > Applied. M
diff --git a/board/xilinx/zynqmp/zynqmp.c b/board/xilinx/zynqmp/zynqmp.c index 70b3c81f1284..bc2090941d90 100644 --- a/board/xilinx/zynqmp/zynqmp.c +++ b/board/xilinx/zynqmp/zynqmp.c @@ -399,9 +399,6 @@ static void print_secure_boot(void) status & ZYNQMP_CSU_STATUS_ENCRYPTED ? "" : "not "); } -#define PS_SYSMON_ANALOG_BUS_VAL 0x3210 -#define PS_SYSMON_ANALOG_BUS_REG 0xFFA50914 - int board_init(void) { #if defined(CONFIG_ZYNQMP_FIRMWARE) @@ -429,9 +426,6 @@ int board_init(void) printf("EL Level:\tEL%d\n", current_el()); - /* Bug in ROM sets wrong value in this register */ - writel(PS_SYSMON_ANALOG_BUS_VAL, PS_SYSMON_ANALOG_BUS_REG); - #if CONFIG_IS_ENABLED(FPGA) && defined(CONFIG_FPGA_ZYNQMPPL) zynqmppl.name = zynqmp_get_silicon_idcode_name(); printf("Chip ID:\t%s\n", zynqmppl.name);