@@ -578,19 +578,14 @@ F: drivers/clk/exynos/clk.h
ARM SAMSUNG EXYNOS850 SOC
M: Sam Protsenko <semen.protsenko@linaro.org>
S: Maintained
-F: arch/arm/dts/exynos850-pinctrl.dtsi
-F: arch/arm/dts/exynos850.dtsi
-F: doc/device-tree-bindings/clock/samsung,exynos850-clock.yaml
F: drivers/clk/exynos/clk-exynos850.c
F: drivers/pinctrl/exynos/pinctrl-exynos850.c
-F: include/dt-bindings/clock/exynos850.h
ARM SAMSUNG SOC DRIVERS
M: Sam Protsenko <semen.protsenko@linaro.org>
S: Maintained
-F: doc/device-tree-bindings/soc/samsung/*
+F: doc/device-tree-bindings/soc/samsung/exynos-pmu.yaml
F: drivers/soc/samsung/*
-F: include/dt-bindings/soc/samsung,*.h
ARM SANCLOUD
M: Paul Barker <paul.barker@sancloud.com>
@@ -31,7 +31,6 @@ dtb-$(CONFIG_EXYNOS7420) += exynos7420-espresso7420.dtb
dtb-$(CONFIG_TARGET_A5Y17LTE) += exynos78x0-axy17lte.dtb
dtb-$(CONFIG_TARGET_A3Y17LTE) += exynos78x0-axy17lte.dtb
dtb-$(CONFIG_TARGET_A7Y17LTE) += exynos78x0-axy17lte.dtb
-dtb-$(CONFIG_TARGET_E850_96) += exynos850-e850-96.dtb
dtb-$(CONFIG_ARCH_APPLE) += \
t8103-j274.dtb \
deleted file mode 100644
@@ -1,273 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * WinLink E850-96 board device tree source
- *
- * Copyright (C) 2018 Samsung Electronics Co., Ltd.
- * Copyright (C) 2021 Linaro Ltd.
- *
- * Device tree source file for WinLink's E850-96 board which is based on
- * Samsung Exynos850 SoC.
- */
-
-/dts-v1/;
-
-#include "exynos850.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-
-/ {
- model = "WinLink E850-96 board";
- compatible = "winlink,e850-96", "samsung,exynos850";
-
- aliases {
- mmc0 = &mmc_0;
- serial0 = &serial_0;
- };
-
- chosen {
- stdout-path = &serial_0;
- };
-
- connector {
- compatible = "gpio-usb-b-connector", "usb-b-connector";
- label = "micro-USB";
- type = "micro";
- vbus-supply = <®_usb_host_vbus>;
- id-gpios = <&gpa0 0 GPIO_ACTIVE_LOW>;
- pinctrl-names = "default";
- pinctrl-0 = <µ_usb_det_pins>;
-
- port {
- usb_dr_connector: endpoint {
- remote-endpoint = <&usb1_drd_sw>;
- };
- };
- };
-
- /*
- * RAM: 4 GiB (eMCP):
- * - 2 GiB at 0x80000000
- * - 2 GiB at 0x880000000
- *
- * 0xbab00000..0xbfffffff: secure memory (85 MiB).
- */
- memory@80000000 {
- device_type = "memory";
- reg = <0x0 0x80000000 0x3ab00000>,
- <0x0 0xc0000000 0x40000000>,
- <0x8 0x80000000 0x80000000>;
- };
-
- gpio-keys {
- compatible = "gpio-keys";
- pinctrl-names = "default";
- pinctrl-0 = <&key_voldown_pins &key_volup_pins>;
-
- volume-down-key {
- label = "Volume Down";
- linux,code = <KEY_VOLUMEDOWN>;
- gpios = <&gpa1 0 GPIO_ACTIVE_LOW>;
- };
-
- volume-up-key {
- label = "Volume Up";
- linux,code = <KEY_VOLUMEUP>;
- gpios = <&gpa0 7 GPIO_ACTIVE_LOW>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- /* HEART_BEAT_LED */
- user_led1: led-1 {
- label = "yellow:user1";
- gpios = <&gpg2 2 GPIO_ACTIVE_HIGH>;
- color = <LED_COLOR_ID_YELLOW>;
- function = LED_FUNCTION_HEARTBEAT;
- linux,default-trigger = "heartbeat";
- };
-
- /* eMMC_LED */
- user_led2: led-2 {
- label = "yellow:user2";
- gpios = <&gpg2 3 GPIO_ACTIVE_HIGH>;
- color = <LED_COLOR_ID_YELLOW>;
- linux,default-trigger = "mmc0";
- };
-
- /* SD_LED */
- user_led3: led-3 {
- label = "white:user3";
- gpios = <&gpg2 4 GPIO_ACTIVE_HIGH>;
- color = <LED_COLOR_ID_WHITE>;
- function = LED_FUNCTION_SD;
- linux,default-trigger = "mmc2";
- };
-
- /* WIFI_LED */
- wlan_active_led: led-4 {
- label = "yellow:wlan";
- gpios = <&gpg2 6 GPIO_ACTIVE_HIGH>;
- color = <LED_COLOR_ID_YELLOW>;
- function = LED_FUNCTION_WLAN;
- linux,default-trigger = "phy0tx";
- default-state = "off";
- };
-
- /* BLUETOOTH_LED */
- bt_active_led: led-5 {
- label = "blue:bt";
- gpios = <&gpg2 7 GPIO_ACTIVE_HIGH>;
- color = <LED_COLOR_ID_BLUE>;
- function = LED_FUNCTION_BLUETOOTH;
- linux,default-trigger = "hci0-power";
- default-state = "off";
- };
- };
-
- /* TODO: Remove this once PMIC is implemented */
- reg_dummy: regulator-0 {
- compatible = "regulator-fixed";
- regulator-name = "dummy_reg";
- };
-
- reg_usb_host_vbus: regulator-1 {
- compatible = "regulator-fixed";
- regulator-name = "usb_host_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpa3 5 GPIO_ACTIVE_LOW>;
- };
-
- reserved-memory {
- #address-cells = <2>;
- #size-cells = <1>;
- ranges;
-
- ramoops@f0000000 {
- compatible = "ramoops";
- reg = <0x0 0xf0000000 0x200000>;
- record-size = <0x20000>;
- console-size = <0x20000>;
- ftrace-size = <0x100000>;
- pmsg-size = <0x20000>;
- };
- };
-
- /*
- * RTC clock (XrtcXTI); external, must be 32.768 kHz.
- *
- * TODO: Remove this once RTC clock is implemented properly as part of
- * PMIC driver.
- */
- rtcclk: clock-rtcclk {
- compatible = "fixed-clock";
- clock-output-names = "rtcclk";
- #clock-cells = <0>;
- clock-frequency = <32768>;
- };
-};
-
-&cmu_hsi {
- clocks = <&oscclk>, <&rtcclk>,
- <&cmu_top CLK_DOUT_HSI_BUS>,
- <&cmu_top CLK_DOUT_HSI_MMC_CARD>,
- <&cmu_top CLK_DOUT_HSI_USB20DRD>;
- clock-names = "oscclk", "rtcclk", "dout_hsi_bus",
- "dout_hsi_mmc_card", "dout_hsi_usb20drd";
-};
-
-&mmc_0 {
- status = "okay";
- mmc-hs200-1_8v;
- mmc-hs400-1_8v;
- cap-mmc-highspeed;
- non-removable;
- mmc-hs400-enhanced-strobe;
- card-detect-delay = <200>;
- clock-frequency = <800000000>;
- bus-width = <8>;
- samsung,dw-mshc-ciu-div = <3>;
- samsung,dw-mshc-sdr-timing = <0 4>;
- samsung,dw-mshc-ddr-timing = <2 4>;
- samsung,dw-mshc-hs400-timing = <0 2>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&sd0_clk_pins &sd0_cmd_pins &sd0_rdqs_pins &sd0_nreset_pins
- &sd0_bus1_pins &sd0_bus4_pins &sd0_bus8_pins>;
-};
-
-&oscclk {
- clock-frequency = <26000000>;
-};
-
-&pinctrl_alive {
- key_voldown_pins: key-voldown-pins {
- samsung,pins = "gpa1-0";
- samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
- };
-
- key_volup_pins: key-volup-pins {
- samsung,pins = "gpa0-7";
- samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
- };
-
- micro_usb_det_pins: micro-usb-det-pins {
- samsung,pins = "gpa0-0";
- samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
- };
-};
-
-&rtc {
- status = "okay";
- clocks = <&cmu_apm CLK_GOUT_RTC_PCLK>, <&rtcclk>;
- clock-names = "rtc", "rtc_src";
-};
-
-&serial_0 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&uart1_pins>;
-};
-
-&usbdrd {
- status = "okay";
- vdd10-supply = <®_dummy>;
- vdd33-supply = <®_dummy>;
-};
-
-&usbdrd_dwc3 {
- dr_mode = "otg";
- usb-role-switch;
- role-switch-default-mode = "host";
-
- port {
- usb1_drd_sw: endpoint {
- remote-endpoint = <&usb_dr_connector>;
- };
- };
-};
-
-&usbdrd_phy {
- status = "okay";
-};
-
-&usi_uart {
- samsung,clkreq-on; /* needed for UART mode */
- status = "okay";
-};
-
-&watchdog_cl0 {
- status = "okay";
-};
-
-&watchdog_cl1 {
- status = "okay";
-};
deleted file mode 100644
@@ -1,663 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Samsung's Exynos850 SoC pin-mux and pin-config device tree source
- *
- * Copyright (C) 2017 Samsung Electronics Co., Ltd.
- * Copyright (C) 2021 Linaro Ltd.
- *
- * Samsung's Exynos850 SoC pin-mux and pin-config options are listed as device
- * tree nodes in this file.
- */
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include "exynos-pinctrl.h"
-
-&pinctrl_alive {
- gpa0: gpa0-gpio-bank {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupt-parent = <&gic>;
- interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- gpa1: gpa1-gpio-bank {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupt-parent = <&gic>;
- interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- gpa2: gpa2-gpio-bank {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupt-parent = <&gic>;
- interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- gpa3: gpa3-gpio-bank {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupt-parent = <&gic>;
- interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- gpa4: gpa4-gpio-bank {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupt-parent = <&gic>;
- interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- gpq0: gpq0-gpio-bank {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- /* I2C5 (also called CAM_PMIC_I2C in TRM) */
- i2c5_pins: i2c5-pins {
- samsung,pins = "gpa3-5", "gpa3-6";
- samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
- samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
- };
-
- /* I2C6 (also called MOTOR_I2C in TRM) */
- i2c6_pins: i2c6-pins {
- samsung,pins = "gpa3-7", "gpa4-0";
- samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
- samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
- };
-
- /* USI: UART_DEBUG_0 pins */
- uart0_pins: uart0-pins {
- samsung,pins = "gpq0-0", "gpq0-1";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
- };
-
- /* USI: UART_DEBUG_1 pins */
- uart1_pins: uart1-pins {
- samsung,pins = "gpa3-7", "gpa4-0";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
- };
-};
-
-&pinctrl_cmgp {
- gpm0: gpm0-gpio-bank {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupt-parent = <&gic>;
- interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- gpm1: gpm1-gpio-bank {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupt-parent = <&gic>;
- interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- gpm2: gpm2-gpio-bank {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupt-parent = <&gic>;
- interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- gpm3: gpm3-gpio-bank {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupt-parent = <&gic>;
- interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- gpm4: gpm4-gpio-bank {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupt-parent = <&gic>;
- interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- gpm5: gpm5-gpio-bank {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupt-parent = <&gic>;
- interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- gpm6: gpm6-gpio-bank {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupt-parent = <&gic>;
- interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- gpm7: gpm7-gpio-bank {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupt-parent = <&gic>;
- interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- /* USI_CMGP0: HSI2C function */
- hsi2c3_pins: hsi2c3-pins {
- samsung,pins = "gpm0-0", "gpm1-0";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
- samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
- };
-
- /* USI_CMGP0: UART function (4 pins, Auto Flow Control) */
- uart1_single_pins: uart1-single-pins {
- samsung,pins = "gpm0-0", "gpm1-0", "gpm2-0", "gpm3-0";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
- };
-
- /* USI_CMGP0: UART function (2 pins, Non-Auto Flow Control) */
- uart1_dual_pins: uart1-dual-pins {
- samsung,pins = "gpm0-0", "gpm1-0";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
- };
-
- /* USI_CMGP0: SPI function */
- spi1_pins: spi1-pins {
- samsung,pins = "gpm0-0", "gpm1-0", "gpm2-0", "gpm3-0";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
- };
-
- /* USI_CMGP1: HSI2C function */
- hsi2c4_pins: hsi2c4-pins {
- samsung,pins = "gpm4-0", "gpm5-0";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
- samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
- };
-
- /* USI_CMGP1: UART function (4 pins, Auto Flow Control) */
- uart2_single_pins: uart2-single-pins {
- samsung,pins = "gpm4-0", "gpm5-0", "gpm6-0", "gpm7-0";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
- };
-
- /* USI_CMGP1: UART function (2 pins, Non-Auto Flow Control) */
- uart2_dual_pins: uart2-dual-pins {
- samsung,pins = "gpm4-0", "gpm5-0";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
- };
-
- /* USI_CMGP1: SPI function */
- spi2_pins: spi2-pins {
- samsung,pins = "gpm4-0", "gpm5-0", "gpm6-0", "gpm7-0";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
- };
-};
-
-&pinctrl_aud {
- gpb0: gpb0-gpio-bank {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpb1: gpb1-gpio-bank {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- aud_codec_mclk_pins: aud-codec-mclk-pins {
- samsung,pins = "gpb0-0";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
- };
-
- aud_codec_mclk_idle_pins: aud-codec-mclk-idle-pins {
- samsung,pins = "gpb0-0";
- samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
- };
-
- aud_i2s0_pins: aud-i2s0-pins {
- samsung,pins = "gpb0-1", "gpb0-2", "gpb0-3", "gpb0-4";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
- };
-
- aud_i2s0_idle_pins: aud-i2s0-idle-pins {
- samsung,pins = "gpb0-1", "gpb0-2", "gpb0-3", "gpb0-4";
- samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
- };
-
- aud_i2s1_pins: aud-i2s1-pins {
- samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
- };
-
- aud_i2s1_idle_pins: aud-i2s1-idle-pins {
- samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3";
- samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
- };
-
- aud_fm_pins: aud-fm-pins {
- samsung,pins = "gpb1-4";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
- };
-
- aud_fm_idle_pins: aud-fm-idle-pins {
- samsung,pins = "gpb1-4";
- samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
- };
-};
-
-&pinctrl_hsi {
- gpf2: gpf2-gpio-bank {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- sd2_clk_pins: sd2-clk-pins {
- samsung,pins = "gpf2-0";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS850_HSI_PIN_DRV_LV2>;
- };
-
- sd2_cmd_pins: sd2-cmd-pins {
- samsung,pins = "gpf2-1";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
- samsung,pin-drv = <EXYNOS850_HSI_PIN_DRV_LV2>;
- };
-
- sd2_bus1_pins: sd2-bus1-pins {
- samsung,pins = "gpf2-2";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
- samsung,pin-drv = <EXYNOS850_HSI_PIN_DRV_LV2>;
- };
-
- sd2_bus4_pins: sd2-bus4-pins {
- samsung,pins = "gpf2-3", "gpf2-4", "gpf2-5";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
- samsung,pin-drv = <EXYNOS850_HSI_PIN_DRV_LV2>;
- };
-
- sd2_pdn_pins: sd2-pdn-pins {
- samsung,pins = "gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3",
- "gpf2-4", "gpf2-5";
- samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
- };
-};
-
-&pinctrl_core {
- gpf0: gpf0-gpio-bank {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpf1: gpf1-gpio-bank {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- sd0_clk_pins: sd0-clk-pins {
- samsung,pins = "gpf0-0";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
- };
-
- sd0_cmd_pins: sd0-cmd-pins {
- samsung,pins = "gpf0-1";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
- samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
- };
-
- sd0_rdqs_pins: sd0-rdqs-pins {
- samsung,pins = "gpf0-2";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
- samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
- };
-
- sd0_nreset_pins: sd0-nreset-pins {
- samsung,pins = "gpf0-3";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
- samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
- };
-
- sd0_bus1_pins: sd0-bus1-pins {
- samsung,pins = "gpf1-0";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
- samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
- };
-
- sd0_bus4_pins: sd0-bus4-pins {
- samsung,pins = "gpf1-1", "gpf1-2", "gpf1-3";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
- samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
- };
-
- sd0_bus8_pins: sd0-bus8-pins {
- samsung,pins = "gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
- samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
- };
-};
-
-&pinctrl_peri {
- gpc0: gpc0-gpio-bank {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpc1: gpc1-gpio-bank {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpg0: gpg0-gpio-bank {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpg1: gpg1-gpio-bank {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpg2: gpg2-gpio-bank {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpg3: gpg3-gpio-bank {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpp0: gpp0-gpio-bank {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
- gpp1: gpp1-gpio-bank {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpp2: gpp2-gpio-bank {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- sensor_mclk0_in_pins: sensor-mclk0-in-pins {
- samsung,pins = "gpc0-0";
- samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
- };
-
- sensor_mclk0_out_pins: sensor-mclk0-out-pins {
- samsung,pins = "gpc0-0";
- samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
- samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
- };
-
- sensor_mclk0_fn_pins: sensor-mclk0-fn-pins {
- samsung,pins = "gpc0-0";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
- };
-
- sensor_mclk1_in_pins: sensor-mclk1-in-pins {
- samsung,pins = "gpc0-1";
- samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
- };
-
- sensor_mclk1_out_pins: sensor-mclk1-out-pins {
- samsung,pins = "gpc0-1";
- samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
- samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
- };
-
- sensor_mclk1_fn_pins: sensor-mclk1-fn-pins {
- samsung,pins = "gpc0-1";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
- };
-
- sensor_mclk2_in_pins: sensor-mclk2-in-pins {
- samsung,pins = "gpc0-2";
- samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
- };
-
- sensor_mclk2_out_pins: sensor-mclk2-out-pins {
- samsung,pins = "gpc0-2";
- samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
- samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
- };
-
- sensor_mclk2_fn_pins: sensor-mclk2-fn-pins {
- samsung,pins = "gpc0-2";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
- };
-
- /* USI: HSI2C0 */
- hsi2c0_pins: hsi2c0-pins {
- samsung,pins = "gpc1-0", "gpc1-1";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
- samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
- };
-
- /* USI: HSI2C1 */
- hsi2c1_pins: hsi2c1-pins {
- samsung,pins = "gpc1-2", "gpc1-3";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
- samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
- };
-
- /* USI: HSI2C2 */
- hsi2c2_pins: hsi2c2-pins {
- samsung,pins = "gpc1-4", "gpc1-5";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
- samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
- };
-
- /* USI: SPI */
- spi0_pins: spi0-pins {
- samsung,pins = "gpp2-0", "gpp2-1", "gpp2-2", "gpp2-3";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
- };
-
- i2c0_pins: i2c0-pins {
- samsung,pins = "gpp0-0", "gpp0-1";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
- };
-
- i2c1_pins: i2c1-pins {
- samsung,pins = "gpp0-2", "gpp0-3";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
- samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
- };
-
- i2c2_pins: i2c2-pins {
- samsung,pins = "gpp0-4", "gpp0-5";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
- samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
- };
-
- i2c3_pins: i2c3-pins {
- samsung,pins = "gpp1-0", "gpp1-1";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
- samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
- };
-
- i2c4_pins: i2c4-pins {
- samsung,pins = "gpp1-2", "gpp1-3";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
- samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
- };
-
- xclkout_pins: xclkout-pins {
- samsung,pins = "gpq0-2";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
- };
-};
deleted file mode 100644
@@ -1,809 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Samsung Exynos850 SoC device tree source
- *
- * Copyright (C) 2018 Samsung Electronics Co., Ltd.
- * Copyright (C) 2021 Linaro Ltd.
- *
- * Samsung Exynos850 SoC device nodes are listed in this file.
- * Exynos850 based board files can include this file and provide
- * values for board specific bindings.
- */
-
-#include <dt-bindings/clock/exynos850.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/soc/samsung,exynos-usi.h>
-
-/ {
- /* Also known under engineering name Exynos3830 */
- compatible = "samsung,exynos850";
- #address-cells = <2>;
- #size-cells = <1>;
-
- interrupt-parent = <&gic>;
-
- aliases {
- pinctrl0 = &pinctrl_alive;
- pinctrl1 = &pinctrl_cmgp;
- pinctrl2 = &pinctrl_aud;
- pinctrl3 = &pinctrl_hsi;
- pinctrl4 = &pinctrl_core;
- pinctrl5 = &pinctrl_peri;
- };
-
- arm-pmu {
- compatible = "arm,cortex-a55-pmu";
- interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>,
- <&cpu4>, <&cpu5>, <&cpu6>, <&cpu7>;
- };
-
- /* Main system clock (XTCXO); external, must be 26 MHz */
- oscclk: clock-oscclk {
- compatible = "fixed-clock";
- clock-output-names = "oscclk";
- #clock-cells = <0>;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu-map {
- cluster0 {
- core0 {
- cpu = <&cpu0>;
- };
- core1 {
- cpu = <&cpu1>;
- };
- core2 {
- cpu = <&cpu2>;
- };
- core3 {
- cpu = <&cpu3>;
- };
- };
-
- cluster1 {
- core0 {
- cpu = <&cpu4>;
- };
- core1 {
- cpu = <&cpu5>;
- };
- core2 {
- cpu = <&cpu6>;
- };
- core3 {
- cpu = <&cpu7>;
- };
- };
- };
-
- cpu0: cpu@0 {
- device_type = "cpu";
- compatible = "arm,cortex-a55";
- reg = <0x0>;
- enable-method = "psci";
- };
- cpu1: cpu@1 {
- device_type = "cpu";
- compatible = "arm,cortex-a55";
- reg = <0x1>;
- enable-method = "psci";
- };
- cpu2: cpu@2 {
- device_type = "cpu";
- compatible = "arm,cortex-a55";
- reg = <0x2>;
- enable-method = "psci";
- };
- cpu3: cpu@3 {
- device_type = "cpu";
- compatible = "arm,cortex-a55";
- reg = <0x3>;
- enable-method = "psci";
- };
- cpu4: cpu@100 {
- device_type = "cpu";
- compatible = "arm,cortex-a55";
- reg = <0x100>;
- enable-method = "psci";
- };
- cpu5: cpu@101 {
- device_type = "cpu";
- compatible = "arm,cortex-a55";
- reg = <0x101>;
- enable-method = "psci";
- };
- cpu6: cpu@102 {
- device_type = "cpu";
- compatible = "arm,cortex-a55";
- reg = <0x102>;
- enable-method = "psci";
- };
- cpu7: cpu@103 {
- device_type = "cpu";
- compatible = "arm,cortex-a55";
- reg = <0x103>;
- enable-method = "psci";
- };
- };
-
- psci {
- compatible = "arm,psci-1.0";
- method = "smc";
- };
-
- timer {
- compatible = "arm,armv8-timer";
- /* Hypervisor Virtual Timer interrupt is not wired to GIC */
- interrupts =
- <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
- };
-
- soc: soc@0 {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x0 0x0 0x0 0x20000000>;
-
- chipid@10000000 {
- compatible = "samsung,exynos850-chipid";
- reg = <0x10000000 0x100>;
- };
-
- timer@10040000 {
- compatible = "samsung,exynos850-mct",
- "samsung,exynos4210-mct";
- reg = <0x10040000 0x800>;
- interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&oscclk>, <&cmu_peri CLK_GOUT_MCT_PCLK>;
- clock-names = "fin_pll", "mct";
- };
-
- gic: interrupt-controller@12a01000 {
- compatible = "arm,gic-400";
- #interrupt-cells = <3>;
- #address-cells = <0>;
- reg = <0x12a01000 0x1000>,
- <0x12a02000 0x2000>,
- <0x12a04000 0x2000>,
- <0x12a06000 0x2000>;
- interrupt-controller;
- interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) |
- IRQ_TYPE_LEVEL_HIGH)>;
- };
-
- pmu_system_controller: system-controller@11860000 {
- compatible = "samsung,exynos850-pmu", "syscon";
- reg = <0x11860000 0x10000>;
-
- reboot: syscon-reboot {
- compatible = "syscon-reboot";
- regmap = <&pmu_system_controller>;
- offset = <0x3a00>; /* SYSTEM_CONFIGURATION */
- mask = <0x2>; /* SWRESET_SYSTEM */
- value = <0x2>; /* reset value */
- };
- };
-
- watchdog_cl0: watchdog@10050000 {
- compatible = "samsung,exynos850-wdt";
- reg = <0x10050000 0x100>;
- interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cmu_peri CLK_GOUT_WDT0_PCLK>, <&oscclk>;
- clock-names = "watchdog", "watchdog_src";
- samsung,syscon-phandle = <&pmu_system_controller>;
- samsung,cluster-index = <0>;
- status = "disabled";
- };
-
- watchdog_cl1: watchdog@10060000 {
- compatible = "samsung,exynos850-wdt";
- reg = <0x10060000 0x100>;
- interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cmu_peri CLK_GOUT_WDT1_PCLK>, <&oscclk>;
- clock-names = "watchdog", "watchdog_src";
- samsung,syscon-phandle = <&pmu_system_controller>;
- samsung,cluster-index = <1>;
- status = "disabled";
- };
-
- cmu_peri: clock-controller@10030000 {
- compatible = "samsung,exynos850-cmu-peri";
- reg = <0x10030000 0x8000>;
- #clock-cells = <1>;
-
- clocks = <&oscclk>, <&cmu_top CLK_DOUT_PERI_BUS>,
- <&cmu_top CLK_DOUT_PERI_UART>,
- <&cmu_top CLK_DOUT_PERI_IP>;
- clock-names = "oscclk", "dout_peri_bus",
- "dout_peri_uart", "dout_peri_ip";
- };
-
- cmu_g3d: clock-controller@11400000 {
- compatible = "samsung,exynos850-cmu-g3d";
- reg = <0x11400000 0x8000>;
- #clock-cells = <1>;
-
- clocks = <&oscclk>, <&cmu_top CLK_DOUT_G3D_SWITCH>;
- clock-names = "oscclk", "dout_g3d_switch";
- };
-
- cmu_apm: clock-controller@11800000 {
- compatible = "samsung,exynos850-cmu-apm";
- reg = <0x11800000 0x8000>;
- #clock-cells = <1>;
-
- clocks = <&oscclk>, <&cmu_top CLK_DOUT_CLKCMU_APM_BUS>;
- clock-names = "oscclk", "dout_clkcmu_apm_bus";
- };
-
- cmu_cmgp: clock-controller@11c00000 {
- compatible = "samsung,exynos850-cmu-cmgp";
- reg = <0x11c00000 0x8000>;
- #clock-cells = <1>;
-
- clocks = <&oscclk>, <&cmu_apm CLK_GOUT_CLKCMU_CMGP_BUS>;
- clock-names = "oscclk", "gout_clkcmu_cmgp_bus";
- };
-
- cmu_core: clock-controller@12000000 {
- compatible = "samsung,exynos850-cmu-core";
- reg = <0x12000000 0x8000>;
- #clock-cells = <1>;
-
- clocks = <&oscclk>, <&cmu_top CLK_DOUT_CORE_BUS>,
- <&cmu_top CLK_DOUT_CORE_CCI>,
- <&cmu_top CLK_DOUT_CORE_MMC_EMBD>,
- <&cmu_top CLK_DOUT_CORE_SSS>;
- clock-names = "oscclk", "dout_core_bus",
- "dout_core_cci", "dout_core_mmc_embd",
- "dout_core_sss";
- };
-
- cmu_top: clock-controller@120e0000 {
- compatible = "samsung,exynos850-cmu-top";
- reg = <0x120e0000 0x8000>;
- #clock-cells = <1>;
-
- clocks = <&oscclk>;
- clock-names = "oscclk";
- };
-
- cmu_mfcmscl: clock-controller@12c00000 {
- compatible = "samsung,exynos850-cmu-mfcmscl";
- reg = <0x12c00000 0x8000>;
- #clock-cells = <1>;
-
- clocks = <&oscclk>,
- <&cmu_top CLK_DOUT_MFCMSCL_MFC>,
- <&cmu_top CLK_DOUT_MFCMSCL_M2M>,
- <&cmu_top CLK_DOUT_MFCMSCL_MCSC>,
- <&cmu_top CLK_DOUT_MFCMSCL_JPEG>;
- clock-names = "oscclk", "dout_mfcmscl_mfc",
- "dout_mfcmscl_m2m", "dout_mfcmscl_mcsc",
- "dout_mfcmscl_jpeg";
- };
-
- cmu_dpu: clock-controller@13000000 {
- compatible = "samsung,exynos850-cmu-dpu";
- reg = <0x13000000 0x8000>;
- #clock-cells = <1>;
-
- clocks = <&oscclk>, <&cmu_top CLK_DOUT_DPU>;
- clock-names = "oscclk", "dout_dpu";
- };
-
- cmu_hsi: clock-controller@13400000 {
- compatible = "samsung,exynos850-cmu-hsi";
- reg = <0x13400000 0x8000>;
- #clock-cells = <1>;
-
- clocks = <&oscclk>,
- <&cmu_top CLK_DOUT_HSI_BUS>,
- <&cmu_top CLK_DOUT_HSI_MMC_CARD>,
- <&cmu_top CLK_DOUT_HSI_USB20DRD>;
- clock-names = "oscclk", "dout_hsi_bus",
- "dout_hsi_mmc_card", "dout_hsi_usb20drd";
- };
-
- cmu_is: clock-controller@14500000 {
- compatible = "samsung,exynos850-cmu-is";
- reg = <0x14500000 0x8000>;
- #clock-cells = <1>;
-
- clocks = <&oscclk>,
- <&cmu_top CLK_DOUT_IS_BUS>,
- <&cmu_top CLK_DOUT_IS_ITP>,
- <&cmu_top CLK_DOUT_IS_VRA>,
- <&cmu_top CLK_DOUT_IS_GDC>;
- clock-names = "oscclk", "dout_is_bus", "dout_is_itp",
- "dout_is_vra", "dout_is_gdc";
- };
-
- cmu_aud: clock-controller@14a00000 {
- compatible = "samsung,exynos850-cmu-aud";
- reg = <0x14a00000 0x8000>;
- #clock-cells = <1>;
-
- clocks = <&oscclk>, <&cmu_top CLK_DOUT_AUD>;
- clock-names = "oscclk", "dout_aud";
- };
-
- pinctrl_alive: pinctrl@11850000 {
- compatible = "samsung,exynos850-pinctrl";
- reg = <0x11850000 0x1000>;
-
- wakeup-interrupt-controller {
- compatible = "samsung,exynos850-wakeup-eint";
- };
- };
-
- pinctrl_cmgp: pinctrl@11c30000 {
- compatible = "samsung,exynos850-pinctrl";
- reg = <0x11c30000 0x1000>;
-
- wakeup-interrupt-controller {
- compatible = "samsung,exynos850-wakeup-eint";
- };
- };
-
- pinctrl_core: pinctrl@12070000 {
- compatible = "samsung,exynos850-pinctrl";
- reg = <0x12070000 0x1000>;
- interrupts = <GIC_SPI 451 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- pinctrl_hsi: pinctrl@13430000 {
- compatible = "samsung,exynos850-pinctrl";
- reg = <0x13430000 0x1000>;
- interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- pinctrl_peri: pinctrl@139b0000 {
- compatible = "samsung,exynos850-pinctrl";
- reg = <0x139b0000 0x1000>;
- interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- pinctrl_aud: pinctrl@14a60000 {
- compatible = "samsung,exynos850-pinctrl";
- reg = <0x14a60000 0x1000>;
- };
-
- rtc: rtc@11a30000 {
- compatible = "samsung,s3c6410-rtc";
- reg = <0x11a30000 0x100>;
- interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cmu_apm CLK_GOUT_RTC_PCLK>;
- clock-names = "rtc";
- status = "disabled";
- };
-
- mmc_0: mmc@12100000 {
- compatible = "samsung,exynos7-dw-mshc-smu";
- reg = <0x12100000 0x2000>;
- interrupts = <GIC_SPI 452 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- clocks = <&cmu_core CLK_GOUT_MMC_EMBD_ACLK>,
- <&cmu_core CLK_GOUT_MMC_EMBD_SDCLKIN>;
- clock-names = "biu", "ciu";
- fifo-depth = <0x40>;
- status = "disabled";
- };
-
- i2c_0: i2c@13830000 {
- compatible = "samsung,s3c2440-i2c";
- reg = <0x13830000 0x100>;
- interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins>;
- clocks = <&cmu_peri CLK_GOUT_I2C0_PCLK>;
- clock-names = "i2c";
- status = "disabled";
- };
-
- i2c_1: i2c@13840000 {
- compatible = "samsung,s3c2440-i2c";
- reg = <0x13840000 0x100>;
- interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins>;
- clocks = <&cmu_peri CLK_GOUT_I2C1_PCLK>;
- clock-names = "i2c";
- status = "disabled";
- };
-
- i2c_2: i2c@13850000 {
- compatible = "samsung,s3c2440-i2c";
- reg = <0x13850000 0x100>;
- interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_pins>;
- clocks = <&cmu_peri CLK_GOUT_I2C2_PCLK>;
- clock-names = "i2c";
- status = "disabled";
- };
-
- i2c_3: i2c@13860000 {
- compatible = "samsung,s3c2440-i2c";
- reg = <0x13860000 0x100>;
- interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c3_pins>;
- clocks = <&cmu_peri CLK_GOUT_I2C3_PCLK>;
- clock-names = "i2c";
- status = "disabled";
- };
-
- i2c_4: i2c@13870000 {
- compatible = "samsung,s3c2440-i2c";
- reg = <0x13870000 0x100>;
- interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c4_pins>;
- clocks = <&cmu_peri CLK_GOUT_I2C4_PCLK>;
- clock-names = "i2c";
- status = "disabled";
- };
-
- /* I2C_5 (also called CAM_PMIC_I2C in TRM) */
- i2c_5: i2c@13880000 {
- compatible = "samsung,s3c2440-i2c";
- reg = <0x13880000 0x100>;
- interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c5_pins>;
- clocks = <&cmu_peri CLK_GOUT_I2C5_PCLK>;
- clock-names = "i2c";
- status = "disabled";
- };
-
- /* I2C_6 (also called MOTOR_I2C in TRM) */
- i2c_6: i2c@13890000 {
- compatible = "samsung,s3c2440-i2c";
- reg = <0x13890000 0x100>;
- interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c6_pins>;
- clocks = <&cmu_peri CLK_GOUT_I2C6_PCLK>;
- clock-names = "i2c";
- status = "disabled";
- };
-
- sysmmu_mfcmscl: sysmmu@12c50000 {
- compatible = "samsung,exynos-sysmmu";
- reg = <0x12c50000 0x9000>;
- interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "sysmmu";
- clocks = <&cmu_mfcmscl CLK_GOUT_MFCMSCL_SYSMMU_CLK>;
- #iommu-cells = <0>;
- };
-
- sysmmu_dpu: sysmmu@130c0000 {
- compatible = "samsung,exynos-sysmmu";
- reg = <0x130c0000 0x9000>;
- interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "sysmmu";
- clocks = <&cmu_dpu CLK_GOUT_DPU_SMMU_CLK>;
- #iommu-cells = <0>;
- };
-
- sysmmu_is0: sysmmu@14550000 {
- compatible = "samsung,exynos-sysmmu";
- reg = <0x14550000 0x9000>;
- interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "sysmmu";
- clocks = <&cmu_is CLK_GOUT_IS_SYSMMU_IS0_CLK>;
- #iommu-cells = <0>;
- };
-
- sysmmu_is1: sysmmu@14570000 {
- compatible = "samsung,exynos-sysmmu";
- reg = <0x14570000 0x9000>;
- interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "sysmmu";
- clocks = <&cmu_is CLK_GOUT_IS_SYSMMU_IS1_CLK>;
- #iommu-cells = <0>;
- };
-
- sysmmu_aud: sysmmu@14850000 {
- compatible = "samsung,exynos-sysmmu";
- reg = <0x14850000 0x9000>;
- interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "sysmmu";
- clocks = <&cmu_aud CLK_GOUT_AUD_SYSMMU_CLK>;
- #iommu-cells = <0>;
- };
-
- sysreg_peri: syscon@10020000 {
- compatible = "samsung,exynos850-peri-sysreg",
- "samsung,exynos850-sysreg", "syscon";
- reg = <0x10020000 0x10000>;
- clocks = <&cmu_peri CLK_GOUT_SYSREG_PERI_PCLK>;
- };
-
- sysreg_cmgp: syscon@11c20000 {
- compatible = "samsung,exynos850-cmgp-sysreg",
- "samsung,exynos850-sysreg", "syscon";
- reg = <0x11c20000 0x10000>;
- clocks = <&cmu_cmgp CLK_GOUT_SYSREG_CMGP_PCLK>;
- };
-
- usbdrd: usb@13600000 {
- compatible = "samsung,exynos850-dwusb3";
- ranges = <0x0 0x13600000 0x10000>;
- clocks = <&cmu_hsi CLK_GOUT_USB_BUS_EARLY_CLK>,
- <&cmu_hsi CLK_GOUT_USB_REF_CLK>;
- clock-names = "bus_early", "ref";
- #address-cells = <1>;
- #size-cells = <1>;
- status = "disabled";
-
- usbdrd_dwc3: usb@0 {
- compatible = "snps,dwc3";
- reg = <0x0 0x10000>;
- interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
- phys = <&usbdrd_phy 0>;
- phy-names = "usb2-phy";
- };
- };
-
- usbdrd_phy: phy@135d0000 {
- compatible = "samsung,exynos850-usbdrd-phy";
- reg = <0x135d0000 0x100>;
- clocks = <&cmu_hsi CLK_GOUT_USB_PHY_ACLK>,
- <&cmu_hsi CLK_GOUT_USB_PHY_REF_CLK>;
- clock-names = "phy", "ref";
- samsung,pmu-syscon = <&pmu_system_controller>;
- #phy-cells = <1>;
- status = "disabled";
- };
-
- usi_uart: usi@138200c0 {
- compatible = "samsung,exynos850-usi";
- reg = <0x138200c0 0x20>;
- samsung,sysreg = <&sysreg_peri 0x1010>;
- samsung,mode = <USI_V2_UART>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- clocks = <&cmu_peri CLK_GOUT_UART_PCLK>,
- <&cmu_peri CLK_GOUT_UART_IPCLK>;
- clock-names = "pclk", "ipclk";
- status = "disabled";
-
- serial_0: serial@13820000 {
- compatible = "samsung,exynos850-uart";
- reg = <0x13820000 0xc0>;
- interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins>;
- clocks = <&cmu_peri CLK_GOUT_UART_PCLK>,
- <&cmu_peri CLK_GOUT_UART_IPCLK>;
- clock-names = "uart", "clk_uart_baud0";
- status = "disabled";
- };
- };
-
- usi_hsi2c_0: usi@138a00c0 {
- compatible = "samsung,exynos850-usi";
- reg = <0x138a00c0 0x20>;
- samsung,sysreg = <&sysreg_peri 0x1020>;
- samsung,mode = <USI_V2_I2C>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- clocks = <&cmu_peri CLK_GOUT_HSI2C0_PCLK>,
- <&cmu_peri CLK_GOUT_HSI2C0_IPCLK>;
- clock-names = "pclk", "ipclk";
- status = "disabled";
-
- hsi2c_0: i2c@138a0000 {
- compatible = "samsung,exynosautov9-hsi2c";
- reg = <0x138a0000 0xc0>;
- interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&hsi2c0_pins>;
- clocks = <&cmu_peri CLK_GOUT_HSI2C0_IPCLK>,
- <&cmu_peri CLK_GOUT_HSI2C0_PCLK>;
- clock-names = "hsi2c", "hsi2c_pclk";
- status = "disabled";
- };
- };
-
- usi_hsi2c_1: usi@138b00c0 {
- compatible = "samsung,exynos850-usi";
- reg = <0x138b00c0 0x20>;
- samsung,sysreg = <&sysreg_peri 0x1030>;
- samsung,mode = <USI_V2_I2C>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- clocks = <&cmu_peri CLK_GOUT_HSI2C1_PCLK>,
- <&cmu_peri CLK_GOUT_HSI2C1_IPCLK>;
- clock-names = "pclk", "ipclk";
- status = "disabled";
-
- hsi2c_1: i2c@138b0000 {
- compatible = "samsung,exynosautov9-hsi2c";
- reg = <0x138b0000 0xc0>;
- interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&hsi2c1_pins>;
- clocks = <&cmu_peri CLK_GOUT_HSI2C1_IPCLK>,
- <&cmu_peri CLK_GOUT_HSI2C1_PCLK>;
- clock-names = "hsi2c", "hsi2c_pclk";
- status = "disabled";
- };
- };
-
- usi_hsi2c_2: usi@138c00c0 {
- compatible = "samsung,exynos850-usi";
- reg = <0x138c00c0 0x20>;
- samsung,sysreg = <&sysreg_peri 0x1040>;
- samsung,mode = <USI_V2_I2C>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- clocks = <&cmu_peri CLK_GOUT_HSI2C2_PCLK>,
- <&cmu_peri CLK_GOUT_HSI2C2_IPCLK>;
- clock-names = "pclk", "ipclk";
- status = "disabled";
-
- hsi2c_2: i2c@138c0000 {
- compatible = "samsung,exynosautov9-hsi2c";
- reg = <0x138c0000 0xc0>;
- interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&hsi2c2_pins>;
- clocks = <&cmu_peri CLK_GOUT_HSI2C2_IPCLK>,
- <&cmu_peri CLK_GOUT_HSI2C2_PCLK>;
- clock-names = "hsi2c", "hsi2c_pclk";
- status = "disabled";
- };
- };
-
- usi_spi_0: usi@139400c0 {
- compatible = "samsung,exynos850-usi";
- reg = <0x139400c0 0x20>;
- samsung,sysreg = <&sysreg_peri 0x1050>;
- samsung,mode = <USI_V2_SPI>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- clocks = <&cmu_peri CLK_GOUT_SPI0_PCLK>,
- <&cmu_peri CLK_GOUT_SPI0_IPCLK>;
- clock-names = "pclk", "ipclk";
- status = "disabled";
- };
-
- usi_cmgp0: usi@11d000c0 {
- compatible = "samsung,exynos850-usi";
- reg = <0x11d000c0 0x20>;
- samsung,sysreg = <&sysreg_cmgp 0x2000>;
- samsung,mode = <USI_V2_I2C>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- clocks = <&cmu_cmgp CLK_GOUT_CMGP_USI0_PCLK>,
- <&cmu_cmgp CLK_GOUT_CMGP_USI0_IPCLK>;
- clock-names = "pclk", "ipclk";
- status = "disabled";
-
- hsi2c_3: i2c@11d00000 {
- compatible = "samsung,exynosautov9-hsi2c";
- reg = <0x11d00000 0xc0>;
- interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&hsi2c3_pins>;
- clocks = <&cmu_cmgp CLK_GOUT_CMGP_USI0_IPCLK>,
- <&cmu_cmgp CLK_GOUT_CMGP_USI0_PCLK>;
- clock-names = "hsi2c", "hsi2c_pclk";
- status = "disabled";
- };
-
- serial_1: serial@11d00000 {
- compatible = "samsung,exynos850-uart";
- reg = <0x11d00000 0xc0>;
- interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&uart1_single_pins>;
- clocks = <&cmu_cmgp CLK_GOUT_CMGP_USI0_PCLK>,
- <&cmu_cmgp CLK_GOUT_CMGP_USI0_IPCLK>;
- clock-names = "uart", "clk_uart_baud0";
- status = "disabled";
- };
- };
-
- usi_cmgp1: usi@11d200c0 {
- compatible = "samsung,exynos850-usi";
- reg = <0x11d200c0 0x20>;
- samsung,sysreg = <&sysreg_cmgp 0x2010>;
- samsung,mode = <USI_V2_I2C>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- clocks = <&cmu_cmgp CLK_GOUT_CMGP_USI1_PCLK>,
- <&cmu_cmgp CLK_GOUT_CMGP_USI1_IPCLK>;
- clock-names = "pclk", "ipclk";
- status = "disabled";
-
- hsi2c_4: i2c@11d20000 {
- compatible = "samsung,exynosautov9-hsi2c";
- reg = <0x11d20000 0xc0>;
- interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&hsi2c4_pins>;
- clocks = <&cmu_cmgp CLK_GOUT_CMGP_USI1_IPCLK>,
- <&cmu_cmgp CLK_GOUT_CMGP_USI1_PCLK>;
- clock-names = "hsi2c", "hsi2c_pclk";
- status = "disabled";
- };
-
- serial_2: serial@11d20000 {
- compatible = "samsung,exynos850-uart";
- reg = <0x11d20000 0xc0>;
- interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&uart2_single_pins>;
- clocks = <&cmu_cmgp CLK_GOUT_CMGP_USI1_PCLK>,
- <&cmu_cmgp CLK_GOUT_CMGP_USI1_IPCLK>;
- clock-names = "uart", "clk_uart_baud0";
- status = "disabled";
- };
- };
- };
-};
-
-#include "exynos850-pinctrl.dtsi"
@@ -249,6 +249,7 @@ config TARGET_E850_96
select OF_CONTROL
select PINCTRL
select PINCTRL_EXYNOS850
+ imply OF_UPSTREAM
endchoice
endif
@@ -2,7 +2,6 @@ WINLINK E850-96 BOARD
M: Sam Protsenko <semen.protsenko@linaro.org>
S: Maintained
F: arch/arm/dts/exynos850-e850-96-u-boot.dtsi
-F: arch/arm/dts/exynos850-e850-96.dts
F: board/samsung/e850-96/
F: configs/e850-96_defconfig
F: doc/board/samsung/e850-96.rst
@@ -7,7 +7,7 @@ CONFIG_SYS_MALLOC_F_LEN=0x4000
CONFIG_ARCH_EXYNOS9=y
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xf8c00000
-CONFIG_DEFAULT_DEVICE_TREE="exynos850-e850-96"
+CONFIG_DEFAULT_DEVICE_TREE="exynos/exynos850-e850-96"
CONFIG_SYS_LOAD_ADDR=0x80000000
# CONFIG_AUTOBOOT is not set
# CONFIG_DISPLAY_CPUINFO is not set
deleted file mode 100644
@@ -1,307 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/clock/samsung,exynos850-clock.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Samsung Exynos850 SoC clock controller
-
-maintainers:
- - Sam Protsenko <semen.protsenko@linaro.org>
-
-description: |
- Exynos850 clock controller is comprised of several CMU units, generating
- clocks for different domains. Those CMU units are modeled as separate device
- tree nodes, and might depend on each other. Root clocks in that clock tree are
- two external clocks:: OSCCLK (26 MHz) and RTCCLK (32768 Hz). Those external
- clocks must be defined as fixed-rate clocks in dts.
-
- CMU_TOP is a top-level CMU, where all base clocks are prepared using PLLs and
- dividers; all other leaf clocks (other CMUs) are usually derived from CMU_TOP.
-
- Each clock is assigned an identifier and client nodes can use this identifier
- to specify the clock which they consume. All clocks available for usage
- in clock consumer nodes are defined as preprocessor macros in
- 'dt-bindings/clock/exynos850.h' header.
-
-properties:
- compatible:
- enum:
- - samsung,exynos850-cmu-top
- - samsung,exynos850-cmu-apm
- - samsung,exynos850-cmu-aud
- - samsung,exynos850-cmu-cmgp
- - samsung,exynos850-cmu-core
- - samsung,exynos850-cmu-dpu
- - samsung,exynos850-cmu-g3d
- - samsung,exynos850-cmu-hsi
- - samsung,exynos850-cmu-is
- - samsung,exynos850-cmu-mfcmscl
- - samsung,exynos850-cmu-peri
-
- clocks:
- minItems: 1
- maxItems: 5
-
- clock-names:
- minItems: 1
- maxItems: 5
-
- "#clock-cells":
- const: 1
-
- reg:
- maxItems: 1
-
-allOf:
- - if:
- properties:
- compatible:
- contains:
- const: samsung,exynos850-cmu-top
-
- then:
- properties:
- clocks:
- items:
- - description: External reference clock (26 MHz)
-
- clock-names:
- items:
- - const: oscclk
-
- - if:
- properties:
- compatible:
- contains:
- const: samsung,exynos850-cmu-apm
-
- then:
- properties:
- clocks:
- items:
- - description: External reference clock (26 MHz)
- - description: CMU_APM bus clock (from CMU_TOP)
-
- clock-names:
- items:
- - const: oscclk
- - const: dout_clkcmu_apm_bus
-
- - if:
- properties:
- compatible:
- contains:
- const: samsung,exynos850-cmu-aud
-
- then:
- properties:
- clocks:
- items:
- - description: External reference clock (26 MHz)
- - description: AUD clock (from CMU_TOP)
-
- clock-names:
- items:
- - const: oscclk
- - const: dout_aud
-
- - if:
- properties:
- compatible:
- contains:
- const: samsung,exynos850-cmu-cmgp
-
- then:
- properties:
- clocks:
- items:
- - description: External reference clock (26 MHz)
- - description: CMU_CMGP bus clock (from CMU_APM)
-
- clock-names:
- items:
- - const: oscclk
- - const: gout_clkcmu_cmgp_bus
-
- - if:
- properties:
- compatible:
- contains:
- const: samsung,exynos850-cmu-core
-
- then:
- properties:
- clocks:
- items:
- - description: External reference clock (26 MHz)
- - description: CMU_CORE bus clock (from CMU_TOP)
- - description: CCI clock (from CMU_TOP)
- - description: eMMC clock (from CMU_TOP)
- - description: SSS clock (from CMU_TOP)
-
- clock-names:
- items:
- - const: oscclk
- - const: dout_core_bus
- - const: dout_core_cci
- - const: dout_core_mmc_embd
- - const: dout_core_sss
-
- - if:
- properties:
- compatible:
- contains:
- const: samsung,exynos850-cmu-dpu
-
- then:
- properties:
- clocks:
- items:
- - description: External reference clock (26 MHz)
- - description: DPU clock (from CMU_TOP)
-
- clock-names:
- items:
- - const: oscclk
- - const: dout_dpu
-
- - if:
- properties:
- compatible:
- contains:
- const: samsung,exynos850-cmu-g3d
-
- then:
- properties:
- clocks:
- items:
- - description: External reference clock (26 MHz)
- - description: G3D clock (from CMU_TOP)
-
- clock-names:
- items:
- - const: oscclk
- - const: dout_g3d_switch
-
- - if:
- properties:
- compatible:
- contains:
- const: samsung,exynos850-cmu-hsi
-
- then:
- properties:
- clocks:
- items:
- - description: External reference clock (26 MHz)
- - description: External RTC clock (32768 Hz)
- - description: CMU_HSI bus clock (from CMU_TOP)
- - description: SD card clock (from CMU_TOP)
- - description: USB 2.0 DRD clock (from CMU_TOP)
-
- clock-names:
- items:
- - const: oscclk
- - const: rtcclk
- - const: dout_hsi_bus
- - const: dout_hsi_mmc_card
- - const: dout_hsi_usb20drd
-
- - if:
- properties:
- compatible:
- contains:
- const: samsung,exynos850-cmu-is
-
- then:
- properties:
- clocks:
- items:
- - description: External reference clock (26 MHz)
- - description: CMU_IS bus clock (from CMU_TOP)
- - description: Image Texture Processing core clock (from CMU_TOP)
- - description: Visual Recognition Accelerator clock (from CMU_TOP)
- - description: Geometric Distortion Correction clock (from CMU_TOP)
-
- clock-names:
- items:
- - const: oscclk
- - const: dout_is_bus
- - const: dout_is_itp
- - const: dout_is_vra
- - const: dout_is_gdc
-
- - if:
- properties:
- compatible:
- contains:
- const: samsung,exynos850-cmu-mfcmscl
-
- then:
- properties:
- clocks:
- items:
- - description: External reference clock (26 MHz)
- - description: Multi-Format Codec clock (from CMU_TOP)
- - description: Memory to Memory Scaler clock (from CMU_TOP)
- - description: Multi-Channel Scaler clock (from CMU_TOP)
- - description: JPEG codec clock (from CMU_TOP)
-
- clock-names:
- items:
- - const: oscclk
- - const: dout_mfcmscl_mfc
- - const: dout_mfcmscl_m2m
- - const: dout_mfcmscl_mcsc
- - const: dout_mfcmscl_jpeg
-
- - if:
- properties:
- compatible:
- contains:
- const: samsung,exynos850-cmu-peri
-
- then:
- properties:
- clocks:
- items:
- - description: External reference clock (26 MHz)
- - description: CMU_PERI bus clock (from CMU_TOP)
- - description: UART clock (from CMU_TOP)
- - description: Parent clock for HSI2C and SPI (from CMU_TOP)
-
- clock-names:
- items:
- - const: oscclk
- - const: dout_peri_bus
- - const: dout_peri_uart
- - const: dout_peri_ip
-
-required:
- - compatible
- - "#clock-cells"
- - clocks
- - clock-names
- - reg
-
-additionalProperties: false
-
-examples:
- # Clock controller node for CMU_PERI
- - |
- #include <dt-bindings/clock/exynos850.h>
-
- cmu_peri: clock-controller@10030000 {
- compatible = "samsung,exynos850-cmu-peri";
- reg = <0x10030000 0x8000>;
- #clock-cells = <1>;
-
- clocks = <&oscclk>, <&cmu_top CLK_DOUT_PERI_BUS>,
- <&cmu_top CLK_DOUT_PERI_UART>,
- <&cmu_top CLK_DOUT_PERI_IP>;
- clock-names = "oscclk", "dout_peri_bus",
- "dout_peri_uart", "dout_peri_ip";
- };
-
-...
deleted file mode 100644
@@ -1,162 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/soc/samsung/exynos-usi.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Samsung's Exynos USI (Universal Serial Interface)
-
-maintainers:
- - Sam Protsenko <semen.protsenko@linaro.org>
-
-description: |
- USI IP-core provides selectable serial protocol (UART, SPI or High-Speed I2C).
- USI shares almost all internal circuits within each protocol, so only one
- protocol can be chosen at a time. USI is modeled as a node with zero or more
- child nodes, each representing a serial sub-node device. The mode setting
- selects which particular function will be used.
-
-properties:
- $nodename:
- pattern: "^usi@[0-9a-f]+$"
-
- compatible:
- enum:
- - samsung,exynos850-usi
-
- reg: true
-
- clocks: true
-
- clock-names: true
-
- ranges: true
-
- "#address-cells":
- const: 1
-
- "#size-cells":
- const: 1
-
- samsung,sysreg:
- $ref: /schemas/types.yaml#/definitions/phandle-array
- items:
- - items:
- - description: phandle to System Register syscon node
- - description: offset of SW_CONF register for this USI controller
- description:
- Should be phandle/offset pair. The phandle to System Register syscon node
- (for the same domain where this USI controller resides) and the offset
- of SW_CONF register for this USI controller.
-
- samsung,mode:
- $ref: /schemas/types.yaml#/definitions/uint32
- description:
- Selects USI function (which serial protocol to use). Refer to
- <include/dt-bindings/soc/samsung,exynos-usi.h> for valid USI mode values.
-
- samsung,clkreq-on:
- type: boolean
- description:
- Enable this property if underlying protocol requires the clock to be
- continuously provided without automatic gating. As suggested by SoC
- manual, it should be set in case of SPI/I2C slave, UART Rx and I2C
- multi-master mode. Usually this property is needed if USI mode is set
- to "UART".
-
- This property is optional.
-
-patternProperties:
- "^i2c@[0-9a-f]+$":
- $ref: /schemas/i2c/i2c-exynos5.yaml
- description: Child node describing underlying I2C
-
- "^serial@[0-9a-f]+$":
- $ref: /schemas/serial/samsung_uart.yaml
- description: Child node describing underlying UART/serial
-
- "^spi@[0-9a-f]+$":
- $ref: /schemas/spi/samsung,spi.yaml
- description: Child node describing underlying SPI
-
-required:
- - compatible
- - ranges
- - "#address-cells"
- - "#size-cells"
- - samsung,sysreg
- - samsung,mode
-
-if:
- properties:
- compatible:
- contains:
- enum:
- - samsung,exynos850-usi
-
-then:
- properties:
- reg:
- maxItems: 1
-
- clocks:
- items:
- - description: Bus (APB) clock
- - description: Operating clock for UART/SPI/I2C protocol
-
- clock-names:
- items:
- - const: pclk
- - const: ipclk
-
- required:
- - reg
- - clocks
- - clock-names
-
-else:
- properties:
- reg: false
- clocks: false
- clock-names: false
- samsung,clkreq-on: false
-
-additionalProperties: false
-
-examples:
- - |
- #include <dt-bindings/interrupt-controller/arm-gic.h>
- #include <dt-bindings/soc/samsung,exynos-usi.h>
-
- usi0: usi@138200c0 {
- compatible = "samsung,exynos850-usi";
- reg = <0x138200c0 0x20>;
- samsung,sysreg = <&sysreg_peri 0x1010>;
- samsung,mode = <USI_V2_UART>;
- samsung,clkreq-on; /* needed for UART mode */
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- clocks = <&cmu_peri 32>, <&cmu_peri 31>;
- clock-names = "pclk", "ipclk";
-
- serial_0: serial@13820000 {
- compatible = "samsung,exynos850-uart";
- reg = <0x13820000 0xc0>;
- interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cmu_peri 32>, <&cmu_peri 31>;
- clock-names = "uart", "clk_uart_baud0";
- status = "disabled";
- };
-
- hsi2c_0: i2c@13820000 {
- compatible = "samsung,exynosautov9-hsi2c";
- reg = <0x13820000 0xc0>;
- interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- clocks = <&cmu_peri 31>, <&cmu_peri 32>;
- clock-names = "hsi2c", "hsi2c_pclk";
- status = "disabled";
- };
- };
deleted file mode 100644
@@ -1,337 +0,0 @@
-/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
-/*
- * Copyright (C) 2021 Linaro Ltd.
- * Author: Sam Protsenko <semen.protsenko@linaro.org>
- *
- * Device Tree binding constants for Exynos850 clock controller.
- */
-
-#ifndef _DT_BINDINGS_CLOCK_EXYNOS_850_H
-#define _DT_BINDINGS_CLOCK_EXYNOS_850_H
-
-/* CMU_TOP */
-#define CLK_FOUT_SHARED0_PLL 1
-#define CLK_FOUT_SHARED1_PLL 2
-#define CLK_FOUT_MMC_PLL 3
-#define CLK_MOUT_SHARED0_PLL 4
-#define CLK_MOUT_SHARED1_PLL 5
-#define CLK_MOUT_MMC_PLL 6
-#define CLK_MOUT_CORE_BUS 7
-#define CLK_MOUT_CORE_CCI 8
-#define CLK_MOUT_CORE_MMC_EMBD 9
-#define CLK_MOUT_CORE_SSS 10
-#define CLK_MOUT_DPU 11
-#define CLK_MOUT_HSI_BUS 12
-#define CLK_MOUT_HSI_MMC_CARD 13
-#define CLK_MOUT_HSI_USB20DRD 14
-#define CLK_MOUT_PERI_BUS 15
-#define CLK_MOUT_PERI_UART 16
-#define CLK_MOUT_PERI_IP 17
-#define CLK_DOUT_SHARED0_DIV3 18
-#define CLK_DOUT_SHARED0_DIV2 19
-#define CLK_DOUT_SHARED1_DIV3 20
-#define CLK_DOUT_SHARED1_DIV2 21
-#define CLK_DOUT_SHARED0_DIV4 22
-#define CLK_DOUT_SHARED1_DIV4 23
-#define CLK_DOUT_CORE_BUS 24
-#define CLK_DOUT_CORE_CCI 25
-#define CLK_DOUT_CORE_MMC_EMBD 26
-#define CLK_DOUT_CORE_SSS 27
-#define CLK_DOUT_DPU 28
-#define CLK_DOUT_HSI_BUS 29
-#define CLK_DOUT_HSI_MMC_CARD 30
-#define CLK_DOUT_HSI_USB20DRD 31
-#define CLK_DOUT_PERI_BUS 32
-#define CLK_DOUT_PERI_UART 33
-#define CLK_DOUT_PERI_IP 34
-#define CLK_GOUT_CORE_BUS 35
-#define CLK_GOUT_CORE_CCI 36
-#define CLK_GOUT_CORE_MMC_EMBD 37
-#define CLK_GOUT_CORE_SSS 38
-#define CLK_GOUT_DPU 39
-#define CLK_GOUT_HSI_BUS 40
-#define CLK_GOUT_HSI_MMC_CARD 41
-#define CLK_GOUT_HSI_USB20DRD 42
-#define CLK_GOUT_PERI_BUS 43
-#define CLK_GOUT_PERI_UART 44
-#define CLK_GOUT_PERI_IP 45
-#define CLK_MOUT_CLKCMU_APM_BUS 46
-#define CLK_DOUT_CLKCMU_APM_BUS 47
-#define CLK_GOUT_CLKCMU_APM_BUS 48
-#define CLK_MOUT_AUD 49
-#define CLK_GOUT_AUD 50
-#define CLK_DOUT_AUD 51
-#define CLK_MOUT_IS_BUS 52
-#define CLK_MOUT_IS_ITP 53
-#define CLK_MOUT_IS_VRA 54
-#define CLK_MOUT_IS_GDC 55
-#define CLK_GOUT_IS_BUS 56
-#define CLK_GOUT_IS_ITP 57
-#define CLK_GOUT_IS_VRA 58
-#define CLK_GOUT_IS_GDC 59
-#define CLK_DOUT_IS_BUS 60
-#define CLK_DOUT_IS_ITP 61
-#define CLK_DOUT_IS_VRA 62
-#define CLK_DOUT_IS_GDC 63
-#define CLK_MOUT_MFCMSCL_MFC 64
-#define CLK_MOUT_MFCMSCL_M2M 65
-#define CLK_MOUT_MFCMSCL_MCSC 66
-#define CLK_MOUT_MFCMSCL_JPEG 67
-#define CLK_GOUT_MFCMSCL_MFC 68
-#define CLK_GOUT_MFCMSCL_M2M 69
-#define CLK_GOUT_MFCMSCL_MCSC 70
-#define CLK_GOUT_MFCMSCL_JPEG 71
-#define CLK_DOUT_MFCMSCL_MFC 72
-#define CLK_DOUT_MFCMSCL_M2M 73
-#define CLK_DOUT_MFCMSCL_MCSC 74
-#define CLK_DOUT_MFCMSCL_JPEG 75
-#define CLK_MOUT_G3D_SWITCH 76
-#define CLK_GOUT_G3D_SWITCH 77
-#define CLK_DOUT_G3D_SWITCH 78
-
-/* CMU_APM */
-#define CLK_RCO_I3C_PMIC 1
-#define OSCCLK_RCO_APM 2
-#define CLK_RCO_APM__ALV 3
-#define CLK_DLL_DCO 4
-#define CLK_MOUT_APM_BUS_USER 5
-#define CLK_MOUT_RCO_APM_I3C_USER 6
-#define CLK_MOUT_RCO_APM_USER 7
-#define CLK_MOUT_DLL_USER 8
-#define CLK_MOUT_CLKCMU_CHUB_BUS 9
-#define CLK_MOUT_APM_BUS 10
-#define CLK_MOUT_APM_I3C 11
-#define CLK_DOUT_CLKCMU_CHUB_BUS 12
-#define CLK_DOUT_APM_BUS 13
-#define CLK_DOUT_APM_I3C 14
-#define CLK_GOUT_CLKCMU_CMGP_BUS 15
-#define CLK_GOUT_CLKCMU_CHUB_BUS 16
-#define CLK_GOUT_RTC_PCLK 17
-#define CLK_GOUT_TOP_RTC_PCLK 18
-#define CLK_GOUT_I3C_PCLK 19
-#define CLK_GOUT_I3C_SCLK 20
-#define CLK_GOUT_SPEEDY_PCLK 21
-#define CLK_GOUT_GPIO_ALIVE_PCLK 22
-#define CLK_GOUT_PMU_ALIVE_PCLK 23
-#define CLK_GOUT_SYSREG_APM_PCLK 24
-
-/* CMU_AUD */
-#define CLK_DOUT_AUD_AUDIF 1
-#define CLK_DOUT_AUD_BUSD 2
-#define CLK_DOUT_AUD_BUSP 3
-#define CLK_DOUT_AUD_CNT 4
-#define CLK_DOUT_AUD_CPU 5
-#define CLK_DOUT_AUD_CPU_ACLK 6
-#define CLK_DOUT_AUD_CPU_PCLKDBG 7
-#define CLK_DOUT_AUD_FM 8
-#define CLK_DOUT_AUD_FM_SPDY 9
-#define CLK_DOUT_AUD_MCLK 10
-#define CLK_DOUT_AUD_UAIF0 11
-#define CLK_DOUT_AUD_UAIF1 12
-#define CLK_DOUT_AUD_UAIF2 13
-#define CLK_DOUT_AUD_UAIF3 14
-#define CLK_DOUT_AUD_UAIF4 15
-#define CLK_DOUT_AUD_UAIF5 16
-#define CLK_DOUT_AUD_UAIF6 17
-#define CLK_FOUT_AUD_PLL 18
-#define CLK_GOUT_AUD_ABOX_ACLK 19
-#define CLK_GOUT_AUD_ASB_CCLK 20
-#define CLK_GOUT_AUD_CA32_CCLK 21
-#define CLK_GOUT_AUD_CNT_BCLK 22
-#define CLK_GOUT_AUD_CODEC_MCLK 23
-#define CLK_GOUT_AUD_DAP_CCLK 24
-#define CLK_GOUT_AUD_GPIO_PCLK 25
-#define CLK_GOUT_AUD_PPMU_ACLK 26
-#define CLK_GOUT_AUD_PPMU_PCLK 27
-#define CLK_GOUT_AUD_SPDY_BCLK 28
-#define CLK_GOUT_AUD_SYSMMU_CLK 29
-#define CLK_GOUT_AUD_SYSREG_PCLK 30
-#define CLK_GOUT_AUD_TZPC_PCLK 31
-#define CLK_GOUT_AUD_UAIF0_BCLK 32
-#define CLK_GOUT_AUD_UAIF1_BCLK 33
-#define CLK_GOUT_AUD_UAIF2_BCLK 34
-#define CLK_GOUT_AUD_UAIF3_BCLK 35
-#define CLK_GOUT_AUD_UAIF4_BCLK 36
-#define CLK_GOUT_AUD_UAIF5_BCLK 37
-#define CLK_GOUT_AUD_UAIF6_BCLK 38
-#define CLK_GOUT_AUD_WDT_PCLK 39
-#define CLK_MOUT_AUD_CPU 40
-#define CLK_MOUT_AUD_CPU_HCH 41
-#define CLK_MOUT_AUD_CPU_USER 42
-#define CLK_MOUT_AUD_FM 43
-#define CLK_MOUT_AUD_PLL 44
-#define CLK_MOUT_AUD_TICK_USB_USER 45
-#define CLK_MOUT_AUD_UAIF0 46
-#define CLK_MOUT_AUD_UAIF1 47
-#define CLK_MOUT_AUD_UAIF2 48
-#define CLK_MOUT_AUD_UAIF3 49
-#define CLK_MOUT_AUD_UAIF4 50
-#define CLK_MOUT_AUD_UAIF5 51
-#define CLK_MOUT_AUD_UAIF6 52
-#define IOCLK_AUDIOCDCLK0 53
-#define IOCLK_AUDIOCDCLK1 54
-#define IOCLK_AUDIOCDCLK2 55
-#define IOCLK_AUDIOCDCLK3 56
-#define IOCLK_AUDIOCDCLK4 57
-#define IOCLK_AUDIOCDCLK5 58
-#define IOCLK_AUDIOCDCLK6 59
-#define TICK_USB 60
-#define CLK_GOUT_AUD_CMU_AUD_PCLK 61
-
-/* CMU_CMGP */
-#define CLK_RCO_CMGP 1
-#define CLK_MOUT_CMGP_ADC 2
-#define CLK_MOUT_CMGP_USI0 3
-#define CLK_MOUT_CMGP_USI1 4
-#define CLK_DOUT_CMGP_ADC 5
-#define CLK_DOUT_CMGP_USI0 6
-#define CLK_DOUT_CMGP_USI1 7
-#define CLK_GOUT_CMGP_ADC_S0_PCLK 8
-#define CLK_GOUT_CMGP_ADC_S1_PCLK 9
-#define CLK_GOUT_CMGP_GPIO_PCLK 10
-#define CLK_GOUT_CMGP_USI0_IPCLK 11
-#define CLK_GOUT_CMGP_USI0_PCLK 12
-#define CLK_GOUT_CMGP_USI1_IPCLK 13
-#define CLK_GOUT_CMGP_USI1_PCLK 14
-#define CLK_GOUT_SYSREG_CMGP_PCLK 15
-
-/* CMU_G3D */
-#define CLK_FOUT_G3D_PLL 1
-#define CLK_MOUT_G3D_PLL 2
-#define CLK_MOUT_G3D_SWITCH_USER 3
-#define CLK_MOUT_G3D_BUSD 4
-#define CLK_DOUT_G3D_BUSP 5
-#define CLK_GOUT_G3D_CMU_G3D_PCLK 6
-#define CLK_GOUT_G3D_GPU_CLK 7
-#define CLK_GOUT_G3D_TZPC_PCLK 8
-#define CLK_GOUT_G3D_GRAY2BIN_CLK 9
-#define CLK_GOUT_G3D_BUSD_CLK 10
-#define CLK_GOUT_G3D_BUSP_CLK 11
-#define CLK_GOUT_G3D_SYSREG_PCLK 12
-
-/* CMU_HSI */
-#define CLK_MOUT_HSI_BUS_USER 1
-#define CLK_MOUT_HSI_MMC_CARD_USER 2
-#define CLK_MOUT_HSI_USB20DRD_USER 3
-#define CLK_MOUT_HSI_RTC 4
-#define CLK_GOUT_USB_RTC_CLK 5
-#define CLK_GOUT_USB_REF_CLK 6
-#define CLK_GOUT_USB_PHY_REF_CLK 7
-#define CLK_GOUT_USB_PHY_ACLK 8
-#define CLK_GOUT_USB_BUS_EARLY_CLK 9
-#define CLK_GOUT_GPIO_HSI_PCLK 10
-#define CLK_GOUT_MMC_CARD_ACLK 11
-#define CLK_GOUT_MMC_CARD_SDCLKIN 12
-#define CLK_GOUT_SYSREG_HSI_PCLK 13
-#define CLK_GOUT_HSI_PPMU_ACLK 14
-#define CLK_GOUT_HSI_PPMU_PCLK 15
-#define CLK_GOUT_HSI_CMU_HSI_PCLK 16
-
-/* CMU_IS */
-#define CLK_MOUT_IS_BUS_USER 1
-#define CLK_MOUT_IS_ITP_USER 2
-#define CLK_MOUT_IS_VRA_USER 3
-#define CLK_MOUT_IS_GDC_USER 4
-#define CLK_DOUT_IS_BUSP 5
-#define CLK_GOUT_IS_CMU_IS_PCLK 6
-#define CLK_GOUT_IS_CSIS0_ACLK 7
-#define CLK_GOUT_IS_CSIS1_ACLK 8
-#define CLK_GOUT_IS_CSIS2_ACLK 9
-#define CLK_GOUT_IS_TZPC_PCLK 10
-#define CLK_GOUT_IS_CSIS_DMA_CLK 11
-#define CLK_GOUT_IS_GDC_CLK 12
-#define CLK_GOUT_IS_IPP_CLK 13
-#define CLK_GOUT_IS_ITP_CLK 14
-#define CLK_GOUT_IS_MCSC_CLK 15
-#define CLK_GOUT_IS_VRA_CLK 16
-#define CLK_GOUT_IS_PPMU_IS0_ACLK 17
-#define CLK_GOUT_IS_PPMU_IS0_PCLK 18
-#define CLK_GOUT_IS_PPMU_IS1_ACLK 19
-#define CLK_GOUT_IS_PPMU_IS1_PCLK 20
-#define CLK_GOUT_IS_SYSMMU_IS0_CLK 21
-#define CLK_GOUT_IS_SYSMMU_IS1_CLK 22
-#define CLK_GOUT_IS_SYSREG_PCLK 23
-
-/* CMU_MFCMSCL */
-#define CLK_MOUT_MFCMSCL_MFC_USER 1
-#define CLK_MOUT_MFCMSCL_M2M_USER 2
-#define CLK_MOUT_MFCMSCL_MCSC_USER 3
-#define CLK_MOUT_MFCMSCL_JPEG_USER 4
-#define CLK_DOUT_MFCMSCL_BUSP 5
-#define CLK_GOUT_MFCMSCL_CMU_MFCMSCL_PCLK 6
-#define CLK_GOUT_MFCMSCL_TZPC_PCLK 7
-#define CLK_GOUT_MFCMSCL_JPEG_ACLK 8
-#define CLK_GOUT_MFCMSCL_M2M_ACLK 9
-#define CLK_GOUT_MFCMSCL_MCSC_CLK 10
-#define CLK_GOUT_MFCMSCL_MFC_ACLK 11
-#define CLK_GOUT_MFCMSCL_PPMU_ACLK 12
-#define CLK_GOUT_MFCMSCL_PPMU_PCLK 13
-#define CLK_GOUT_MFCMSCL_SYSMMU_CLK 14
-#define CLK_GOUT_MFCMSCL_SYSREG_PCLK 15
-
-/* CMU_PERI */
-#define CLK_MOUT_PERI_BUS_USER 1
-#define CLK_MOUT_PERI_UART_USER 2
-#define CLK_MOUT_PERI_HSI2C_USER 3
-#define CLK_MOUT_PERI_SPI_USER 4
-#define CLK_DOUT_PERI_HSI2C0 5
-#define CLK_DOUT_PERI_HSI2C1 6
-#define CLK_DOUT_PERI_HSI2C2 7
-#define CLK_DOUT_PERI_SPI0 8
-#define CLK_GOUT_PERI_HSI2C0 9
-#define CLK_GOUT_PERI_HSI2C1 10
-#define CLK_GOUT_PERI_HSI2C2 11
-#define CLK_GOUT_GPIO_PERI_PCLK 12
-#define CLK_GOUT_HSI2C0_IPCLK 13
-#define CLK_GOUT_HSI2C0_PCLK 14
-#define CLK_GOUT_HSI2C1_IPCLK 15
-#define CLK_GOUT_HSI2C1_PCLK 16
-#define CLK_GOUT_HSI2C2_IPCLK 17
-#define CLK_GOUT_HSI2C2_PCLK 18
-#define CLK_GOUT_I2C0_PCLK 19
-#define CLK_GOUT_I2C1_PCLK 20
-#define CLK_GOUT_I2C2_PCLK 21
-#define CLK_GOUT_I2C3_PCLK 22
-#define CLK_GOUT_I2C4_PCLK 23
-#define CLK_GOUT_I2C5_PCLK 24
-#define CLK_GOUT_I2C6_PCLK 25
-#define CLK_GOUT_MCT_PCLK 26
-#define CLK_GOUT_PWM_MOTOR_PCLK 27
-#define CLK_GOUT_SPI0_IPCLK 28
-#define CLK_GOUT_SPI0_PCLK 29
-#define CLK_GOUT_SYSREG_PERI_PCLK 30
-#define CLK_GOUT_UART_IPCLK 31
-#define CLK_GOUT_UART_PCLK 32
-#define CLK_GOUT_WDT0_PCLK 33
-#define CLK_GOUT_WDT1_PCLK 34
-
-/* CMU_CORE */
-#define CLK_MOUT_CORE_BUS_USER 1
-#define CLK_MOUT_CORE_CCI_USER 2
-#define CLK_MOUT_CORE_MMC_EMBD_USER 3
-#define CLK_MOUT_CORE_SSS_USER 4
-#define CLK_MOUT_CORE_GIC 5
-#define CLK_DOUT_CORE_BUSP 6
-#define CLK_GOUT_CCI_ACLK 7
-#define CLK_GOUT_GIC_CLK 8
-#define CLK_GOUT_MMC_EMBD_ACLK 9
-#define CLK_GOUT_MMC_EMBD_SDCLKIN 10
-#define CLK_GOUT_SSS_ACLK 11
-#define CLK_GOUT_SSS_PCLK 12
-#define CLK_GOUT_GPIO_CORE_PCLK 13
-#define CLK_GOUT_SYSREG_CORE_PCLK 14
-
-/* CMU_DPU */
-#define CLK_MOUT_DPU_USER 1
-#define CLK_DOUT_DPU_BUSP 2
-#define CLK_GOUT_DPU_CMU_DPU_PCLK 3
-#define CLK_GOUT_DPU_DECON0_ACLK 4
-#define CLK_GOUT_DPU_DMA_ACLK 5
-#define CLK_GOUT_DPU_DPP_ACLK 6
-#define CLK_GOUT_DPU_PPMU_ACLK 7
-#define CLK_GOUT_DPU_PPMU_PCLK 8
-#define CLK_GOUT_DPU_SMMU_CLK 9
-#define CLK_GOUT_DPU_SYSREG_PCLK 10
-#define DPU_NR_CLK 11
-
-#endif /* _DT_BINDINGS_CLOCK_EXYNOS_850_H */
deleted file mode 100644
@@ -1,17 +0,0 @@
-/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
-/*
- * Copyright (c) 2021 Linaro Ltd.
- * Author: Sam Protsenko <semen.protsenko@linaro.org>
- *
- * Device Tree bindings for Samsung Exynos USI (Universal Serial Interface).
- */
-
-#ifndef __DT_BINDINGS_SAMSUNG_EXYNOS_USI_H
-#define __DT_BINDINGS_SAMSUNG_EXYNOS_USI_H
-
-#define USI_V2_NONE 0
-#define USI_V2_UART 1
-#define USI_V2_SPI 2
-#define USI_V2_I2C 3
-
-#endif /* __DT_BINDINGS_SAMSUNG_EXYNOS_USI_H */