| Message ID | 20240511112821.1156519-4-jonas@kwiboo.se |
|---|---|
| State | New |
| Delegated to: | Kever Yang |
| Headers | show |
| Series | rockchip: Add gpio request() ops and drop PCIe reset-gpios workaround | expand |
diff --git a/arch/arm/dts/rk3568-rock-3a-u-boot.dtsi b/arch/arm/dts/rk3568-rock-3a-u-boot.dtsi index 9d18f5d0b364..f4e2dc91ddfb 100644 --- a/arch/arm/dts/rk3568-rock-3a-u-boot.dtsi +++ b/arch/arm/dts/rk3568-rock-3a-u-boot.dtsi @@ -6,18 +6,6 @@ #include "rk356x-u-boot.dtsi" -&pcie3x2 { - pinctrl-0 = <&pcie3x2_reset_h>; -}; - -&pinctrl { - pcie { - pcie3x2_reset_h: pcie3x2-reset-h { - rockchip,pins = <2 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; -}; - &sdhci { cap-mmc-highspeed; mmc-hs200-1_8v;
The GPIO2_D6 pin is changed to use func-4 using pcie30x2m1_pins during probe of pcie3x2. This cause the device to lock-up when pci driver use the reset-gpios unless the pin is first changed to use gpio pinmux. Drop the board u-boot.dtsi workaround now that the gpio and pinctrl drivers automatically use gpio pinmux when a gpio is requested. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> --- arch/arm/dts/rk3568-rock-3a-u-boot.dtsi | 12 ------------ 1 file changed, 12 deletions(-)