From patchwork Sat May 4 19:42:58 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: Jonas Karlman X-Patchwork-Id: 1931412 X-Patchwork-Delegate: ykai007@gmail.com Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@legolas.ozlabs.org Authentication-Results: legolas.ozlabs.org; dkim=pass (2048-bit key; secure) header.d=kwiboo.se header.i=@kwiboo.se header.a=rsa-sha256 header.s=fe-e1b5cab7be header.b=IkXA/GGR; dkim-atps=neutral Authentication-Results: legolas.ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=lists.denx.de (client-ip=2a01:238:438b:c500:173d:9f52:ddab:ee01; helo=phobos.denx.de; envelope-from=u-boot-bounces@lists.denx.de; receiver=patchwork.ozlabs.org) Received: from phobos.denx.de (phobos.denx.de [IPv6:2a01:238:438b:c500:173d:9f52:ddab:ee01]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature ECDSA (secp384r1)) (No client certificate requested) by legolas.ozlabs.org (Postfix) with ESMTPS id 4VWzr43RnKz1yb7 for ; Sun, 5 May 2024 06:32:36 +1000 (AEST) Received: from h2850616.stratoserver.net (localhost [IPv6:::1]) by phobos.denx.de (Postfix) with ESMTP id D16A9884BB; Sat, 4 May 2024 22:32:18 +0200 (CEST) Authentication-Results: phobos.denx.de; dmarc=pass (p=none dis=none) header.from=kwiboo.se Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=u-boot-bounces@lists.denx.de Authentication-Results: phobos.denx.de; dkim=pass (2048-bit key; secure) header.d=kwiboo.se header.i=@kwiboo.se header.b="IkXA/GGR"; dkim-atps=neutral Received: by phobos.denx.de (Postfix, from userid 109) id 2A22488586; Sat, 4 May 2024 21:45:38 +0200 (CEST) X-Spam-Checker-Version: SpamAssassin 3.4.2 (2018-09-13) on phobos.denx.de X-Spam-Level: X-Spam-Status: No, score=-2.1 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,SPF_HELO_NONE,SPF_PASS autolearn=ham autolearn_force=no version=3.4.2 Received: from smtp.forwardemail.net (smtp.forwardemail.net [167.172.40.54]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits)) (No client certificate requested) by phobos.denx.de (Postfix) with ESMTPS id 62B3588593 for ; Sat, 4 May 2024 21:45:23 +0200 (CEST) Authentication-Results: phobos.denx.de; dmarc=pass (p=none dis=none) header.from=kwiboo.se Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=SRS0=fdac=MI=kwiboo.se=jonas@fe-bounces.kwiboo.se DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=kwiboo.se; h=Content-Transfer-Encoding: Content-Type: MIME-Version: References: In-Reply-To: Message-ID: Date: Subject: Cc: To: From; q=dns/txt; s=fe-e1b5cab7be; t=1714851876; bh=nfXWXMAD6anHNBr1wKqsP4NMRNAZB4O+G3/9rO74RqM=; b=IkXA/GGRk5uvyOEHFp4gZaitukugPzWZuyd+1pk1D72gmhyOHyiYuL44Qbtd9f0ylt/aCTWxI YIFztH+LMWUga9JCJANqhtlWd9M2YXI7k2Wb0OWaXsAOoV3729P5qRKAlJXn6Erx3HrvyeUaEl8 2gfzhxkMDX+9SZ0ob2ulepLKs22BL6hdqmZ7P85AvGPZSEGLxz/RxsJB8uG0o/qJSWKIxuJk2zp XFxbR6CPQeX/9YXI+lMIpFQucm5qp6Ku1oJFzt48SGp1/TXRoxvpAcQlStJCuDftph/rwwGpOD0 FQX7z+iVBraVfSCvIImPCFv7R61KccWz0dit3DKV90JA== From: Jonas Karlman To: Kever Yang , Simon Glass , Philipp Tomsich , Tom Rini , Andy Yan , Manivannan Sadhasivam , Nick Xie , Jagan Teki , Alexandre Vicenzi , Xiaobo Tian , Peter Robinson , Jonas Karlman , Quentin Schulz , Klaus Goger , Levin Du , Suniel Mahesh , FUKAUMI Naoki , Christopher Obbard Cc: u-boot@lists.denx.de Subject: [PATCH 06/16] rockchip: rk3399: Remove redundant device tree files Date: Sat, 4 May 2024 19:42:58 +0000 Message-ID: <20240504194346.2462489-7-jonas@kwiboo.se> X-Mailer: git-send-email 2.43.2 In-Reply-To: <20240504194346.2462489-1-jonas@kwiboo.se> References: <20240504194346.2462489-1-jonas@kwiboo.se> MIME-Version: 1.0 X-Report-Abuse-To: abuse@forwardemail.net X-Report-Abuse: abuse@forwardemail.net X-Complaints-To: abuse@forwardemail.net X-ForwardEmail-Version: 0.4.40 X-ForwardEmail-Sender: rfc822; jonas@kwiboo.se, smtp.forwardemail.net, 167.172.40.54 X-ForwardEmail-ID: 6636901f2b8e4dad13276dc0 X-Mailman-Approved-At: Sat, 04 May 2024 22:32:16 +0200 X-BeenThere: u-boot@lists.denx.de X-Mailman-Version: 2.1.39 Precedence: list List-Id: U-Boot discussion List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: u-boot-bounces@lists.denx.de Sender: "U-Boot" X-Virus-Scanned: clamav-milter 0.103.8 at phobos.denx.de X-Virus-Status: Clean Remove redundant device tree files now that RK3399 boards have been migrated to use OF_UPSTREAM. Signed-off-by: Jonas Karlman Reviewed-by: Kever Yang --- arch/arm/dts/rk3399-eaidk-610.dts | 940 ------ arch/arm/dts/rk3399-evb.dts | 485 --- arch/arm/dts/rk3399-ficus.dts | 174 - arch/arm/dts/rk3399-firefly.dts | 944 ------ arch/arm/dts/rk3399-gru-bob.dts | 95 - arch/arm/dts/rk3399-gru-chromebook.dtsi | 590 ---- arch/arm/dts/rk3399-gru-kevin.dts | 328 -- arch/arm/dts/rk3399-gru.dtsi | 865 ----- arch/arm/dts/rk3399-khadas-edge-captain.dts | 31 - arch/arm/dts/rk3399-khadas-edge-v.dts | 31 - arch/arm/dts/rk3399-khadas-edge.dts | 13 - arch/arm/dts/rk3399-khadas-edge.dtsi | 837 ----- arch/arm/dts/rk3399-leez-p710.dts | 653 ---- arch/arm/dts/rk3399-nanopc-t4.dts | 137 - arch/arm/dts/rk3399-nanopi-m4.dts | 66 - arch/arm/dts/rk3399-nanopi-m4b.dts | 52 - arch/arm/dts/rk3399-nanopi-neo4.dts | 50 - arch/arm/dts/rk3399-nanopi-r4s.dts | 133 - arch/arm/dts/rk3399-nanopi4.dtsi | 762 ----- arch/arm/dts/rk3399-op1-opp.dtsi | 166 - arch/arm/dts/rk3399-opp.dtsi | 133 - arch/arm/dts/rk3399-orangepi.dts | 896 ----- arch/arm/dts/rk3399-pinebook-pro.dts | 1111 ------- arch/arm/dts/rk3399-pinephone-pro.dts | 621 ---- arch/arm/dts/rk3399-puma-haikou.dts | 306 -- arch/arm/dts/rk3399-puma.dtsi | 532 --- arch/arm/dts/rk3399-roc-pc-mezzanine.dts | 111 - arch/arm/dts/rk3399-roc-pc.dts | 12 - arch/arm/dts/rk3399-roc-pc.dtsi | 844 ----- arch/arm/dts/rk3399-rock-4c-plus.dts | 709 ---- arch/arm/dts/rk3399-rock-4se.dts | 65 - arch/arm/dts/rk3399-rock-pi-4.dtsi | 792 ----- arch/arm/dts/rk3399-rock-pi-4a.dts | 24 - arch/arm/dts/rk3399-rock-pi-4c.dts | 80 - arch/arm/dts/rk3399-rock960.dts | 156 - arch/arm/dts/rk3399-rock960.dtsi | 673 ---- arch/arm/dts/rk3399-rockpro64.dts | 30 - arch/arm/dts/rk3399-rockpro64.dtsi | 956 ------ arch/arm/dts/rk3399-t-opp.dtsi | 114 - arch/arm/dts/rk3399.dtsi | 2945 ----------------- arch/arm/dts/rk3399pro-rock-pi-n10.dts | 22 - arch/arm/dts/rk3399pro-vmarc-som.dtsi | 477 --- arch/arm/dts/rk3399pro.dtsi | 22 - .../clock/rockchip,rk3399-dmc.txt | 42 - include/dt-bindings/clock/rk3399-cru.h | 751 ----- include/dt-bindings/power/rk3399-power.h | 53 - 46 files changed, 19829 deletions(-) delete mode 100644 arch/arm/dts/rk3399-eaidk-610.dts delete mode 100644 arch/arm/dts/rk3399-evb.dts delete mode 100644 arch/arm/dts/rk3399-ficus.dts delete mode 100644 arch/arm/dts/rk3399-firefly.dts delete mode 100644 arch/arm/dts/rk3399-gru-bob.dts delete mode 100644 arch/arm/dts/rk3399-gru-chromebook.dtsi delete mode 100644 arch/arm/dts/rk3399-gru-kevin.dts delete mode 100644 arch/arm/dts/rk3399-gru.dtsi delete mode 100644 arch/arm/dts/rk3399-khadas-edge-captain.dts delete mode 100644 arch/arm/dts/rk3399-khadas-edge-v.dts delete mode 100644 arch/arm/dts/rk3399-khadas-edge.dts delete mode 100644 arch/arm/dts/rk3399-khadas-edge.dtsi delete mode 100644 arch/arm/dts/rk3399-leez-p710.dts delete mode 100644 arch/arm/dts/rk3399-nanopc-t4.dts delete mode 100644 arch/arm/dts/rk3399-nanopi-m4.dts delete mode 100644 arch/arm/dts/rk3399-nanopi-m4b.dts delete mode 100644 arch/arm/dts/rk3399-nanopi-neo4.dts delete mode 100644 arch/arm/dts/rk3399-nanopi-r4s.dts delete mode 100644 arch/arm/dts/rk3399-nanopi4.dtsi delete mode 100644 arch/arm/dts/rk3399-op1-opp.dtsi delete mode 100644 arch/arm/dts/rk3399-opp.dtsi delete mode 100644 arch/arm/dts/rk3399-orangepi.dts delete mode 100644 arch/arm/dts/rk3399-pinebook-pro.dts delete mode 100644 arch/arm/dts/rk3399-pinephone-pro.dts delete mode 100644 arch/arm/dts/rk3399-puma-haikou.dts delete mode 100644 arch/arm/dts/rk3399-puma.dtsi delete mode 100644 arch/arm/dts/rk3399-roc-pc-mezzanine.dts delete mode 100644 arch/arm/dts/rk3399-roc-pc.dts delete mode 100644 arch/arm/dts/rk3399-roc-pc.dtsi delete mode 100644 arch/arm/dts/rk3399-rock-4c-plus.dts delete mode 100644 arch/arm/dts/rk3399-rock-4se.dts delete mode 100644 arch/arm/dts/rk3399-rock-pi-4.dtsi delete mode 100644 arch/arm/dts/rk3399-rock-pi-4a.dts delete mode 100644 arch/arm/dts/rk3399-rock-pi-4c.dts delete mode 100644 arch/arm/dts/rk3399-rock960.dts delete mode 100644 arch/arm/dts/rk3399-rock960.dtsi delete mode 100644 arch/arm/dts/rk3399-rockpro64.dts delete mode 100644 arch/arm/dts/rk3399-rockpro64.dtsi delete mode 100644 arch/arm/dts/rk3399-t-opp.dtsi delete mode 100644 arch/arm/dts/rk3399.dtsi delete mode 100644 arch/arm/dts/rk3399pro-rock-pi-n10.dts delete mode 100644 arch/arm/dts/rk3399pro-vmarc-som.dtsi delete mode 100644 arch/arm/dts/rk3399pro.dtsi delete mode 100644 doc/device-tree-bindings/clock/rockchip,rk3399-dmc.txt delete mode 100644 include/dt-bindings/clock/rk3399-cru.h delete mode 100644 include/dt-bindings/power/rk3399-power.h diff --git a/arch/arm/dts/rk3399-eaidk-610.dts b/arch/arm/dts/rk3399-eaidk-610.dts deleted file mode 100644 index 173da81fc231..000000000000 --- a/arch/arm/dts/rk3399-eaidk-610.dts +++ /dev/null @@ -1,940 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2022 Fuzhou Rockchip Electronics Co., Ltd. - */ - -/dts-v1/; -#include -#include -#include -#include "rk3399.dtsi" -#include "rk3399-opp.dtsi" - -/ { - model = "OPEN AI LAB EAIDK-610"; - compatible = "openailab,eaidk-610", "rockchip,rk3399"; - - aliases { - ethernet0 = &gmac; - mmc0 = &sdio0; - mmc1 = &sdmmc; - mmc2 = &sdhci; - }; - - backlight: backlight { - compatible = "pwm-backlight"; - pwms = <&pwm0 0 25000 0>; - brightness-levels = < - 0 1 2 3 4 5 6 7 - 8 9 10 11 12 13 14 15 - 16 17 18 19 20 21 22 23 - 24 25 26 27 28 29 30 31 - 32 33 34 35 36 37 38 39 - 40 41 42 43 44 45 46 47 - 48 49 50 51 52 53 54 55 - 56 57 58 59 60 61 62 63 - 64 65 66 67 68 69 70 71 - 72 73 74 75 76 77 78 79 - 80 81 82 83 84 85 86 87 - 88 89 90 91 92 93 94 95 - 96 97 98 99 100 101 102 103 - 104 105 106 107 108 109 110 111 - 112 113 114 115 116 117 118 119 - 120 121 122 123 124 125 126 127 - 128 129 130 131 132 133 134 135 - 136 137 138 139 140 141 142 143 - 144 145 146 147 148 149 150 151 - 152 153 154 155 156 157 158 159 - 160 161 162 163 164 165 166 167 - 168 169 170 171 172 173 174 175 - 176 177 178 179 180 181 182 183 - 184 185 186 187 188 189 190 191 - 192 193 194 195 196 197 198 199 - 200 201 202 203 204 205 206 207 - 208 209 210 211 212 213 214 215 - 216 217 218 219 220 221 222 223 - 224 225 226 227 228 229 230 231 - 232 233 234 235 236 237 238 239 - 240 241 242 243 244 245 246 247 - 248 249 250 251 252 253 254 255>; - default-brightness-level = <200>; - }; - - clkin_gmac: external-gmac-clock { - compatible = "fixed-clock"; - clock-frequency = <125000000>; - clock-output-names = "clkin_gmac"; - #clock-cells = <0>; - }; - - dc_12v: dc-12v { - compatible = "regulator-fixed"; - regulator-name = "dc_12v"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - }; - - gpio-keys { - compatible = "gpio-keys"; - autorepeat; - pinctrl-names = "default"; - pinctrl-0 = <&pwrbtn>; - - key-power { - debounce-interval = <100>; - gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; - label = "GPIO Key Power"; - linux,code = ; - wakeup-source; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&work_led_pin>, <&user_led_pin>, - <&heartbeat_led_pin>, <&wlan_active_led_pin>, - <&bt_active_led_pin>; - - work_led: led-0 { - label = "blue:work"; - default-state = "on"; - gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>; - }; - - user_led: led-1 { - label = "read:user"; - default-state = "off"; - gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>; - }; - - heartbeat_led: led-2 { - label = "green:heartbeat"; - linux,default-trigger = "heartbeat"; - gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>; - }; - - wlan_active_led: led-3 { - label = "yellow:wlan"; - gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "phy0tx"; - default-state = "off"; - }; - - bt_active_led: led-4 { - label = "blue:bt"; - gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "hci0-power"; - default-state = "off"; - }; - }; - - rt5651-sound { - compatible = "simple-audio-card"; - simple-audio-card,name = "realtek,rt5651-codec"; - simple-audio-card,format = "i2s"; - simple-audio-card,mclk-fs = <256>; - simple-audio-card,widgets = - "Microphone", "Mic Jack", - "Headphone", "Headphone Jack"; - simple-audio-card,routing = - "Mic Jack", "MICBIAS1", - "IN1P", "Mic Jack", - "Headphone Jack", "HPOL", - "Headphone Jack", "HPOR"; - simple-audio-card,cpu { - sound-dai = <&i2s1>; - }; - simple-audio-card,codec { - sound-dai = <&rt5651>; - }; - }; - - sdio_pwrseq: sdio-pwrseq { - compatible = "mmc-pwrseq-simple"; - clocks = <&rk808 1>; - clock-names = "ext_clock"; - pinctrl-names = "default"; - pinctrl-0 = <&wifi_enable_h>; - - /* - * On the module itself this is one of these (depending - * on the actual card populated): - * - SDIO_RESET_L_WL_REG_ON - * - PDN (power down when low) - */ - reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; - }; - - /* switched by pmic_sleep */ - vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 { - compatible = "regulator-fixed"; - regulator-name = "vcc1v8_s3"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vcc_1v8>; - }; - - vcc3v3_sys: vcc3v3-sys { - compatible = "regulator-fixed"; - regulator-name = "vcc3v3_sys"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&dc_12v>; - }; - - vcc5v0_sys: vcc5v0-sys { - compatible = "regulator-fixed"; - regulator-name = "vcc5v0_sys"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&dc_12v>; - }; - - /* For USB3.0 Port1/2 */ - vcc5v0_host1: vcc5v0-host1-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&vcc5v0_host1_en>; - regulator-name = "vcc5v0_host1"; - regulator-always-on; - vin-supply = <&vcc5v0_sys>; - }; - - /* For USB2.0 Port1/2 */ - vcc5v0_host3: vcc5v0-host3-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio0 RK_PB0 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&vcc5v0_host3_en>; - regulator-name = "vcc5v0_host3"; - regulator-always-on; - vin-supply = <&vcc5v0_sys>; - }; - - vcc5v0_typec: vcc5v0-typec-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio4 RK_PC5 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&vcc5v0_typec_en>; - regulator-name = "vcc5v0_typec"; - regulator-always-on; - vin-supply = <&vcc3v3_sys>; - }; - - vdd_log: vdd-log { - compatible = "regulator-fixed"; - regulator-name = "vdd_log"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <900000>; - }; -}; - -&cpu_l0 { - cpu-supply = <&vdd_cpu_l>; -}; - -&cpu_l1 { - cpu-supply = <&vdd_cpu_l>; -}; - -&cpu_l2 { - cpu-supply = <&vdd_cpu_l>; -}; - -&cpu_l3 { - cpu-supply = <&vdd_cpu_l>; -}; - -&cpu_b0 { - cpu-supply = <&vdd_cpu_b>; -}; - -&cpu_b1 { - cpu-supply = <&vdd_cpu_b>; -}; - -&emmc_phy { - status = "okay"; -}; - -&gmac { - assigned-clocks = <&cru SCLK_RMII_SRC>; - assigned-clock-parents = <&clkin_gmac>; - clock_in_out = "input"; - phy-supply = <&vcc_lan>; - phy-mode = "rgmii"; - pinctrl-names = "default"; - pinctrl-0 = <&rgmii_pins>; - snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; - snps,reset-active-low; - snps,reset-delays-us = <0 10000 50000>; - tx_delay = <0x28>; - rx_delay = <0x11>; - status = "okay"; -}; - -&gpu { - mali-supply = <&vdd_gpu>; - status = "okay"; -}; - -&hdmi { - ddc-i2c-bus = <&i2c3>; - pinctrl-names = "default"; - pinctrl-0 = <&hdmi_cec>; - status = "okay"; -}; - -&i2c0 { - status = "okay"; - - rk808: pmic@1b { - compatible = "rockchip,rk808"; - reg = <0x1b>; - interrupt-parent = <&gpio1>; - interrupts = <21 IRQ_TYPE_LEVEL_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&pmic_int_l>; - rockchip,system-power-controller; - wakeup-source; - #clock-cells = <1>; - clock-output-names = "xin32k", "rk808-clkout2"; - - vcc1-supply = <&vcc3v3_sys>; - vcc2-supply = <&vcc3v3_sys>; - vcc3-supply = <&vcc3v3_sys>; - vcc4-supply = <&vcc3v3_sys>; - vcc6-supply = <&vcc3v3_sys>; - vcc7-supply = <&vcc3v3_sys>; - vcc8-supply = <&vcc3v3_sys>; - vcc9-supply = <&vcc3v3_sys>; - vcc10-supply = <&vcc3v3_sys>; - vcc11-supply = <&vcc3v3_sys>; - vcc12-supply = <&vcc3v3_sys>; - vddio-supply = <&vcc_3v0>; - - regulators { - vdd_center: DCDC_REG1 { - regulator-name = "vdd_center"; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1350000>; - regulator-ramp-delay = <6001>; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_cpu_l: DCDC_REG2 { - regulator-name = "vdd_cpu_l"; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1350000>; - regulator-ramp-delay = <6001>; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_ddr: DCDC_REG3 { - regulator-name = "vcc_ddr"; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - vcc_1v8: DCDC_REG4 { - regulator-name = "vcc_1v8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vcc1v8_dvp: LDO_REG1 { - regulator-name = "vcc1v8_dvp"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc2v8_dvp: LDO_REG2 { - regulator-name = "vcc2v8_dvp"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc1v8_pmu: LDO_REG3 { - regulator-name = "vcc1v8_pmu"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vcc_sdio: LDO_REG4 { - regulator-name = "vcc_sdio"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3000000>; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3000000>; - }; - }; - - vcca3v0_codec: LDO_REG5 { - regulator-name = "vcca3v0_codec"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_1v5: LDO_REG6 { - regulator-name = "vcc_1v5"; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1500000>; - }; - }; - - vcca1v8_codec: LDO_REG7 { - regulator-name = "vcca1v8_codec"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_3v0: LDO_REG8 { - regulator-name = "vcc_3v0"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3000000>; - }; - }; - - vcc3v3_s3: vcc_lan: SWITCH_REG1 { - regulator-name = "vcc3v3_s3"; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc3v3_s0: SWITCH_REG2 { - regulator-name = "vcc3v3_s0"; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - }; - }; - - vdd_cpu_b: regulator@40 { - compatible = "silergy,syr827"; - reg = <0x40>; - fcs,suspend-voltage-selector = <1>; - regulator-name = "vdd_cpu_b"; - pinctrl-names = "default"; - pinctrl-0 = <&vsel1_pin>; - regulator-min-microvolt = <712500>; - regulator-max-microvolt = <1500000>; - regulator-ramp-delay = <1000>; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vcc3v3_sys>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_gpu: regulator@41 { - compatible = "silergy,syr828"; - reg = <0x41>; - fcs,suspend-voltage-selector = <1>; - regulator-name = "vdd_gpu"; - pinctrl-names = "default"; - pinctrl-0 = <&vsel2_pin>; - regulator-min-microvolt = <712500>; - regulator-max-microvolt = <1500000>; - regulator-ramp-delay = <1000>; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vcc3v3_sys>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; -}; - -&i2c1 { - i2c-scl-rising-time-ns = <300>; - i2c-scl-falling-time-ns = <15>; - status = "okay"; - - rt5651: audio-codec@1a { - compatible = "rockchip,rt5651"; - reg = <0x1a>; - clocks = <&cru SCLK_I2S_8CH_OUT>; - clock-names = "mclk"; - hp-det-gpio = <&gpio4 RK_PD4 GPIO_ACTIVE_LOW>; - spk-con-gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>; - #sound-dai-cells = <0>; - }; - -}; - -&i2c3 { - i2c-scl-rising-time-ns = <450>; - i2c-scl-falling-time-ns = <15>; - status = "okay"; -}; - -&i2c4 { - i2c-scl-rising-time-ns = <600>; - i2c-scl-falling-time-ns = <20>; - status = "okay"; - - fusb0: typec-portc@22 { - compatible = "fcs,fusb302"; - reg = <0x22>; - interrupt-parent = <&gpio1>; - interrupts = ; - pinctrl-names = "default"; - pinctrl-0 = <&fusb0_int>; - vbus-supply = <&vcc5v0_typec>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - usbc0_role_sw: endpoint@0 { - remote-endpoint = <&dwc3_0_role_switch>; - }; - }; - }; - - connector { - compatible = "usb-c-connector"; - data-role = "dual"; - label = "USB-C"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - usbc_hs: endpoint { - remote-endpoint = <&u2phy0_typec_hs>; - }; - }; - - port@1 { - reg = <1>; - - usbc_ss: endpoint { - remote-endpoint = <&tcphy0_typec_ss>; - }; - }; - }; - }; - }; -}; - -&i2s1 { - rockchip,playback-channels = <2>; - rockchip,capture-channels = <2>; - status = "okay"; -}; - -&i2s2 { - status = "okay"; -}; - -&io_domains { - status = "okay"; - - audio-supply = <&vcca1v8_codec>; - bt656-supply = <&vcc_3v0>; - gpio1830-supply = <&vcc_3v0>; - sdmmc-supply = <&vcc_sdio>; -}; - -&pmu_io_domains { - status = "okay"; - - pmu1830-supply = <&vcc_3v0>; -}; - -&pinctrl { - buttons { - pwrbtn: pwrbtn { - rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - bt { - bt_enable_h: bt-enable-h { - rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - bt_host_wake_l: bt-host-wake-l { - rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - bt_wake_l: bt-wake-l { - rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - fusb302x { - fusb0_int: fusb0-int { - rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - lcd-panel { - lcd_panel_reset: lcd-panel-reset { - rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - leds { - work_led_pin: work-led-pin { - rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - user_led_pin: user-led-pin { - rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - heartbeat_led_pin: heartbeat-led-pin { - rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - wlan_active_led_pin: wlan-led-pin { - rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - bt_active_led_pin: bt-led-pin { - rockchip,pins = <2 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - - }; - - pmic { - pmic_int_l: pmic-int-l { - rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; - }; - - vsel1_pin: vsel1-pin { - rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; - }; - - vsel2_pin: vsel2-pin { - rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; - }; - }; - - rt5651 { - rt5651_hpcon: rt5640-hpcon { - rockchip,pins = <4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - sdio-pwrseq { - wifi_enable_h: wifi-enable-h { - rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - usb-typec { - vcc5v0_typec_en: vcc5v0_typec_en { - rockchip,pins = <4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - usb2 { - vcc5v0_host3_en: vcc5v0-host3-en { - rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - vcc5v0_host1_en: vcc5v0-host1-en { - rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - wifi { - wifi_host_wake_l: wifi-host-wake-l { - rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; -}; - -&pwm0 { - status = "okay"; -}; - -&saradc { - vref-supply = <&vcca1v8_s3>; - status = "okay"; -}; - -&sdio0 { - /* WiFi & BT combo module AMPAK AP6255 */ - #address-cells = <1>; - #size-cells = <0>; - bus-width = <4>; - clock-frequency = <50000000>; - cap-sdio-irq; - cap-sd-highspeed; - keep-power-in-suspend; - mmc-pwrseq = <&sdio_pwrseq>; - non-removable; - pinctrl-names = "default"; - pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>; - sd-uhs-sdr104; - status = "okay"; - - brcmf: wifi@1 { - compatible = "brcm,bcm4329-fmac"; - reg = <1>; - interrupt-parent = <&gpio0>; - interrupts = ; - interrupt-names = "host-wake"; - pinctrl-names = "default"; - pinctrl-0 = <&wifi_host_wake_l>; - }; -}; - -&sdmmc { - bus-width = <4>; - cap-mmc-highspeed; - cap-sd-highspeed; - cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>; - disable-wp; - max-frequency = <150000000>; - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>; - status = "okay"; -}; - -&sdhci { - bus-width = <8>; - non-removable; - status = "okay"; -}; - -&tcphy0 { - status = "okay"; -}; - -&tcphy0_usb3 { - orientation-switch; - port { - tcphy0_typec_ss: endpoint { - remote-endpoint = <&usbc_ss>; - }; - }; -}; - -&tcphy1 { - status = "okay"; -}; - -&tsadc { - /* tshut mode 0:CRU 1:GPIO */ - rockchip,hw-tshut-mode = <1>; - /* tshut polarity 0:LOW 1:HIGH */ - rockchip,hw-tshut-polarity = <1>; - status = "okay"; -}; - -&u2phy0 { - status = "okay"; - - u2phy0_otg: otg-port { - status = "okay"; - }; - - u2phy0_host: host-port { - phy-supply = <&vcc5v0_host3>; - status = "okay"; - }; - - port { - u2phy0_typec_hs: endpoint { - remote-endpoint = <&usbc_hs>; - }; - }; -}; - -&u2phy1 { - status = "okay"; - - u2phy1_otg: otg-port { - status = "okay"; - }; - - u2phy1_host: host-port { - phy-supply = <&vcc5v0_host3>; - status = "okay"; - }; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; - status = "okay"; - - bluetooth { - compatible = "brcm,bcm4345c5"; - clocks = <&rk808 1>; - clock-names = "lpo"; - device-wakeup-gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>; - host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>; - shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>; - max-speed = <1500000>; - pinctrl-names = "default"; - pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>; - vbat-supply = <&vcc3v3_sys>; - vddio-supply = <&vcc_1v8>; - }; -}; - -&uart2 { - status = "okay"; -}; - -&usb_host0_ehci { - status = "okay"; -}; - -&usb_host0_ohci { - status = "okay"; -}; - -&usb_host1_ehci { - status = "okay"; -}; - -&usb_host1_ohci { - status = "okay"; -}; - -&usbdrd3_0 { - status = "okay"; -}; - -&usbdrd_dwc3_0 { - status = "okay"; - usb-role-switch; - - port { - #address-cells = <1>; - #size-cells = <0>; - dwc3_0_role_switch: endpoint@0 { - reg = <0>; - remote-endpoint = <&usbc0_role_sw>; - }; - }; -}; - -&usbdrd3_1 { - status = "okay"; -}; - -&usbdrd_dwc3_1 { - status = "okay"; - dr_mode = "host"; -}; - -&vopb { - status = "okay"; -}; - -&vopb_mmu { - status = "okay"; -}; - -&vopl { - status = "okay"; -}; - -&vopl_mmu { - status = "okay"; -}; diff --git a/arch/arm/dts/rk3399-evb.dts b/arch/arm/dts/rk3399-evb.dts deleted file mode 100644 index 55eca7a50a1f..000000000000 --- a/arch/arm/dts/rk3399-evb.dts +++ /dev/null @@ -1,485 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd - */ - -/dts-v1/; -#include -#include "rk3399.dtsi" - -/ { - model = "Rockchip RK3399 Evaluation Board"; - compatible = "rockchip,rk3399-evb", "rockchip,rk3399"; - - aliases { - ethernet0 = &gmac; - mmc0 = &sdhci; - }; - - backlight: backlight { - compatible = "pwm-backlight"; - brightness-levels = < - 0 1 2 3 4 5 6 7 - 8 9 10 11 12 13 14 15 - 16 17 18 19 20 21 22 23 - 24 25 26 27 28 29 30 31 - 32 33 34 35 36 37 38 39 - 40 41 42 43 44 45 46 47 - 48 49 50 51 52 53 54 55 - 56 57 58 59 60 61 62 63 - 64 65 66 67 68 69 70 71 - 72 73 74 75 76 77 78 79 - 80 81 82 83 84 85 86 87 - 88 89 90 91 92 93 94 95 - 96 97 98 99 100 101 102 103 - 104 105 106 107 108 109 110 111 - 112 113 114 115 116 117 118 119 - 120 121 122 123 124 125 126 127 - 128 129 130 131 132 133 134 135 - 136 137 138 139 140 141 142 143 - 144 145 146 147 148 149 150 151 - 152 153 154 155 156 157 158 159 - 160 161 162 163 164 165 166 167 - 168 169 170 171 172 173 174 175 - 176 177 178 179 180 181 182 183 - 184 185 186 187 188 189 190 191 - 192 193 194 195 196 197 198 199 - 200 201 202 203 204 205 206 207 - 208 209 210 211 212 213 214 215 - 216 217 218 219 220 221 222 223 - 224 225 226 227 228 229 230 231 - 232 233 234 235 236 237 238 239 - 240 241 242 243 244 245 246 247 - 248 249 250 251 252 253 254 255>; - default-brightness-level = <200>; - pwms = <&pwm0 0 25000 0>; - }; - - edp_panel: edp-panel { - compatible = "lg,lp079qx1-sp0v"; - backlight = <&backlight>; - enable-gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>; - power-supply = <&vcc3v3_s0>; - - port { - panel_in_edp: endpoint { - remote-endpoint = <&edp_out_panel>; - }; - }; - }; - - clkin_gmac: external-gmac-clock { - compatible = "fixed-clock"; - clock-frequency = <125000000>; - clock-output-names = "clkin_gmac"; - #clock-cells = <0>; - }; - - vdd_center: vdd-center { - compatible = "pwm-regulator"; - pwms = <&pwm3 0 25000 0>; - regulator-name = "vdd_center"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1400000>; - regulator-always-on; - regulator-boot-on; - status = "okay"; - }; - - vcc3v3_sys: vcc3v3-sys { - compatible = "regulator-fixed"; - regulator-name = "vcc3v3_sys"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - vcc5v0_sys: vcc5v0-sys { - compatible = "regulator-fixed"; - regulator-name = "vcc5v0_sys"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; - - vcc5v0_host: vcc5v0-host-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&vcc5v0_host_en>; - regulator-name = "vcc5v0_host"; - vin-supply = <&vcc5v0_sys>; - }; - - vcc_phy: vcc-phy-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc_phy"; - regulator-always-on; - regulator-boot-on; - }; - - vcc_phy: vcc-phy-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc_phy"; - regulator-always-on; - regulator-boot-on; - }; - -}; - -&edp { - status = "okay"; - force-hpd; - - ports { - edp_out: port@1 { - reg = <1>; - #address-cells = <1>; - #size-cells = <0>; - - edp_out_panel: endpoint@0 { - reg = <0>; - remote-endpoint = <&panel_in_edp>; - }; - }; - }; -}; - -&emmc_phy { - status = "okay"; -}; - -&gmac { - assigned-clocks = <&cru SCLK_RMII_SRC>; - assigned-clock-parents = <&clkin_gmac>; - clock_in_out = "input"; - phy-supply = <&vcc_phy>; - phy-mode = "rgmii"; - pinctrl-names = "default"; - pinctrl-0 = <&rgmii_pins>; - snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; - snps,reset-active-low; - snps,reset-delays-us = <0 10000 50000>; - tx_delay = <0x28>; - rx_delay = <0x11>; - status = "okay"; -}; - -&i2c0 { - status = "okay"; - - rk808: pmic@1b { - compatible = "rockchip,rk808"; - reg = <0x1b>; - interrupt-parent = <&gpio1>; - interrupts = <21 IRQ_TYPE_LEVEL_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&pmic_int_l>; - rockchip,system-power-controller; - wakeup-source; - #clock-cells = <1>; - clock-output-names = "rk808-clkout1", "rk808-clkout2"; - - vcc1-supply = <&vcc3v3_sys>; - vcc2-supply = <&vcc3v3_sys>; - vcc3-supply = <&vcc3v3_sys>; - vcc4-supply = <&vcc3v3_sys>; - vcc6-supply = <&vcc3v3_sys>; - vcc7-supply = <&vcc3v3_sys>; - vcc8-supply = <&vcc3v3_sys>; - vcc9-supply = <&vcc3v3_sys>; - vcc10-supply = <&vcc3v3_sys>; - vcc11-supply = <&vcc3v3_sys>; - vcc12-supply = <&vcc3v3_sys>; - vddio-supply = <&vcc1v8_pmu>; - - regulators { - vdd_log: DCDC_REG1 { - regulator-name = "vdd_log"; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1350000>; - regulator-ramp-delay = <6001>; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <900000>; - }; - }; - - vdd_cpu_l: DCDC_REG2 { - regulator-name = "vdd_cpu_l"; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1350000>; - regulator-ramp-delay = <6001>; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_ddr: DCDC_REG3 { - regulator-name = "vcc_ddr"; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - vcc_1v8: DCDC_REG4 { - regulator-name = "vcc_1v8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vcc1v8_dvp: LDO_REG1 { - regulator-name = "vcc1v8_dvp"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc3v0_tp: LDO_REG2 { - regulator-name = "vcc3v0_tp"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc1v8_pmu: LDO_REG3 { - regulator-name = "vcc1v8_pmu"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vcc_sd: LDO_REG4 { - regulator-name = "vcc_sd"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3000000>; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3000000>; - }; - }; - - vcca3v0_codec: LDO_REG5 { - regulator-name = "vcca3v0_codec"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_1v5: LDO_REG6 { - regulator-name = "vcc_1v5"; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1500000>; - }; - }; - - vcca1v8_codec: LDO_REG7 { - regulator-name = "vcca1v8_codec"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_3v0: LDO_REG8 { - regulator-name = "vcc_3v0"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3000000>; - }; - }; - - vcc3v3_s3: SWITCH_REG1 { - regulator-name = "vcc3v3_s3"; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - vcc3v3_s0: SWITCH_REG2 { - regulator-name = "vcc3v3_s0"; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - }; - }; - - vdd_cpu_b: regulator@40 { - compatible = "silergy,syr827"; - reg = <0x40>; - fcs,suspend-voltage-selector = <1>; - regulator-name = "vdd_cpu_b"; - regulator-min-microvolt = <712500>; - regulator-max-microvolt = <1500000>; - regulator-ramp-delay = <1000>; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vcc5v0_sys>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_gpu: regulator@41 { - compatible = "silergy,syr828"; - reg = <0x41>; - fcs,suspend-voltage-selector = <1>; - regulator-name = "vdd_gpu"; - regulator-min-microvolt = <712500>; - regulator-max-microvolt = <1500000>; - regulator-ramp-delay = <1000>; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vcc5v0_sys>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; -}; - -&pwm0 { - status = "okay"; -}; - -&pwm2 { - status = "okay"; -}; - -&pwm3 { - status = "okay"; -}; - -&sdhci { - bus-width = <8>; - mmc-hs400-1_8v; - mmc-hs400-enhanced-strobe; - non-removable; - status = "okay"; -}; - -&pcie_phy { - status = "disabled"; -}; - -&pcie0 { - ep-gpios = <&gpio3 RK_PB5 GPIO_ACTIVE_HIGH>; - num-lanes = <4>; - pinctrl-names = "default"; - pinctrl-0 = <&pcie_clkreqn_cpm>; - status = "disabled"; -}; - -&u2phy0 { - status = "okay"; -}; - -&u2phy0_host { - phy-supply = <&vcc5v0_host>; - status = "okay"; -}; - -&u2phy1 { - status = "okay"; -}; - -&u2phy1_host { - phy-supply = <&vcc5v0_host>; - status = "okay"; -}; - -&uart2 { - status = "okay"; -}; - -&usb_host0_ehci { - status = "okay"; -}; - -&usb_host0_ohci { - status = "okay"; -}; - -&usb_host1_ehci { - status = "okay"; -}; - -&usb_host1_ohci { - status = "okay"; -}; - -&pinctrl { - pmic { - pmic_int_l: pmic-int-l { - rockchip,pins = - <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - usb2 { - vcc5v0_host_en: vcc5v0-host-en { - rockchip,pins = - <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; -}; - -&vopb { - status = "okay"; -}; - -&vopb_mmu { - status = "okay"; -}; diff --git a/arch/arm/dts/rk3399-ficus.dts b/arch/arm/dts/rk3399-ficus.dts deleted file mode 100644 index 30e4879f322c..000000000000 --- a/arch/arm/dts/rk3399-ficus.dts +++ /dev/null @@ -1,174 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2018 Collabora Ltd. - * Copyright (c) 2018 Fuzhou Rockchip Electronics Co., Ltd. - * - * Schematics available at https://dl.vamrs.com/products/ficus/docs/hw - */ - -/dts-v1/; -#include "rk3399-rock960.dtsi" - -/ { - model = "96boards RK3399 Ficus"; - compatible = "vamrs,ficus", "rockchip,rk3399"; - - aliases { - ethernet0 = &gmac; - }; - - chosen { - stdout-path = "serial2:1500000n8"; - }; - - clkin_gmac: external-gmac-clock { - compatible = "fixed-clock"; - clock-frequency = <125000000>; - clock-output-names = "clkin_gmac"; - #clock-cells = <0>; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&user_led1_pin>, <&user_led2_pin>, - <&user_led3_pin>, <&user_led4_pin>, - <&wlan_led_pin>, <&bt_led_pin>; - - user_led1: led-1 { - label = "red:user1"; - gpios = <&gpio4 25 0>; - linux,default-trigger = "heartbeat"; - }; - - user_led2: led-2 { - label = "red:user2"; - gpios = <&gpio4 26 0>; - linux,default-trigger = "mmc0"; - }; - - user_led3: led-3 { - label = "red:user3"; - gpios = <&gpio4 30 0>; - linux,default-trigger = "mmc1"; - }; - - user_led4: led-4 { - label = "red:user4"; - gpios = <&gpio1 0 0>; - panic-indicator; - linux,default-trigger = "none"; - }; - - wlan_active_led: led-5 { - label = "red:wlan"; - gpios = <&gpio1 1 0>; - linux,default-trigger = "phy0tx"; - default-state = "off"; - }; - - bt_active_led: led-6 { - label = "red:bt"; - gpios = <&gpio1 4 0>; - linux,default-trigger = "hci0-power"; - default-state = "off"; - }; - }; -}; - -&gmac { - assigned-clocks = <&cru SCLK_RMII_SRC>; - assigned-clock-parents = <&clkin_gmac>; - clock_in_out = "input"; - phy-supply = <&vcc3v3_sys>; - phy-mode = "rgmii"; - pinctrl-names = "default"; - pinctrl-0 = <&rgmii_pins>; - snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; - snps,reset-active-low; - snps,reset-delays-us = <0 10000 50000>; - tx_delay = <0x28>; - rx_delay = <0x11>; - status = "okay"; -}; - -&pcie0 { - ep-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_HIGH>; -}; - -&pinctrl { - gmac { - rgmii_sleep_pins: rgmii-sleep-pins { - rockchip,pins = - <3 RK_PB7 RK_FUNC_GPIO &pcfg_output_low>; - }; - }; - - pcie { - pcie_drv: pcie-drv { - rockchip,pins = - <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - usb2 { - host_vbus_drv: host-vbus-drv { - rockchip,pins = - <4 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - leds { - user_led1_pin: user-led1-pin { - rockchip,pins = - <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - user_led2_pin: user-led2-pin { - rockchip,pins = - <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - user_led3_pin: user-led3-pin { - rockchip,pins = - <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - user_led4_pin: user-led4-pin { - rockchip,pins = - <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - wlan_led_pin: wlan-led-pin { - rockchip,pins = - <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - bt_led_pin: bt-led-pin { - rockchip,pins = - <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; -}; - -&spi1 { - /* On both Low speed and High speed expansion */ - cs-gpios = <0>, <&gpio4 RK_PA6 0>, <&gpio4 RK_PA7 0>; - status = "okay"; -}; - -&usbdrd_dwc3_0 { - dr_mode = "host"; -}; - -&usbdrd_dwc3_1 { - dr_mode = "host"; -}; - -&vcc3v3_pcie { - gpio = <&gpio1 24 GPIO_ACTIVE_HIGH>; -}; - -&vcc5v0_host { - gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>; -}; diff --git a/arch/arm/dts/rk3399-firefly.dts b/arch/arm/dts/rk3399-firefly.dts deleted file mode 100644 index 260415d99aeb..000000000000 --- a/arch/arm/dts/rk3399-firefly.dts +++ /dev/null @@ -1,944 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd. - */ - -/dts-v1/; -#include -#include -#include -#include -#include "rk3399.dtsi" -#include "rk3399-opp.dtsi" - -/ { - model = "Firefly-RK3399 Board"; - compatible = "firefly,firefly-rk3399", "rockchip,rk3399"; - - aliases { - ethernet0 = &gmac; - mmc0 = &sdio0; - mmc1 = &sdmmc; - mmc2 = &sdhci; - }; - - chosen { - stdout-path = "serial2:1500000n8"; - }; - - backlight: backlight { - compatible = "pwm-backlight"; - enable-gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>; - pwms = <&pwm0 0 25000 0>; - brightness-levels = < - 0 1 2 3 4 5 6 7 - 8 9 10 11 12 13 14 15 - 16 17 18 19 20 21 22 23 - 24 25 26 27 28 29 30 31 - 32 33 34 35 36 37 38 39 - 40 41 42 43 44 45 46 47 - 48 49 50 51 52 53 54 55 - 56 57 58 59 60 61 62 63 - 64 65 66 67 68 69 70 71 - 72 73 74 75 76 77 78 79 - 80 81 82 83 84 85 86 87 - 88 89 90 91 92 93 94 95 - 96 97 98 99 100 101 102 103 - 104 105 106 107 108 109 110 111 - 112 113 114 115 116 117 118 119 - 120 121 122 123 124 125 126 127 - 128 129 130 131 132 133 134 135 - 136 137 138 139 140 141 142 143 - 144 145 146 147 148 149 150 151 - 152 153 154 155 156 157 158 159 - 160 161 162 163 164 165 166 167 - 168 169 170 171 172 173 174 175 - 176 177 178 179 180 181 182 183 - 184 185 186 187 188 189 190 191 - 192 193 194 195 196 197 198 199 - 200 201 202 203 204 205 206 207 - 208 209 210 211 212 213 214 215 - 216 217 218 219 220 221 222 223 - 224 225 226 227 228 229 230 231 - 232 233 234 235 236 237 238 239 - 240 241 242 243 244 245 246 247 - 248 249 250 251 252 253 254 255>; - default-brightness-level = <200>; - }; - - clkin_gmac: external-gmac-clock { - compatible = "fixed-clock"; - clock-frequency = <125000000>; - clock-output-names = "clkin_gmac"; - #clock-cells = <0>; - }; - - dc_12v: dc-12v { - compatible = "regulator-fixed"; - regulator-name = "dc_12v"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - }; - - gpio-keys { - compatible = "gpio-keys"; - autorepeat; - pinctrl-names = "default"; - pinctrl-0 = <&pwrbtn>; - - key-power { - debounce-interval = <100>; - gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; - label = "GPIO Key Power"; - linux,code = ; - wakeup-source; - }; - }; - - ir-receiver { - compatible = "gpio-ir-receiver"; - gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>; - pinctrl-0 = <&ir_int>; - pinctrl-names = "default"; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&work_led_pin>, <&diy_led_pin>; - - work_led: led-0 { - label = "work"; - default-state = "on"; - gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>; - }; - - diy_led: led-1 { - label = "diy"; - default-state = "off"; - gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>; - }; - }; - - rt5640-sound { - compatible = "simple-audio-card"; - simple-audio-card,name = "rockchip,rt5640-codec"; - simple-audio-card,format = "i2s"; - simple-audio-card,mclk-fs = <256>; - simple-audio-card,widgets = - "Microphone", "Mic Jack", - "Headphone", "Headphone Jack"; - simple-audio-card,routing = - "Mic Jack", "MICBIAS1", - "IN1P", "Mic Jack", - "Headphone Jack", "HPOL", - "Headphone Jack", "HPOR"; - - simple-audio-card,cpu { - sound-dai = <&i2s1>; - }; - - simple-audio-card,codec { - sound-dai = <&rt5640>; - }; - }; - - sdio_pwrseq: sdio-pwrseq { - compatible = "mmc-pwrseq-simple"; - clocks = <&rk808 1>; - clock-names = "ext_clock"; - pinctrl-names = "default"; - pinctrl-0 = <&wifi_enable_h>; - - /* - * On the module itself this is one of these (depending - * on the actual card populated): - * - SDIO_RESET_L_WL_REG_ON - * - PDN (power down when low) - */ - reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; - }; - - sound-dit { - compatible = "audio-graph-card"; - label = "SPDIF"; - dais = <&spdif_p0>; - }; - - spdif-dit { - compatible = "linux,spdif-dit"; - #sound-dai-cells = <0>; - - port { - dit_p0_0: endpoint { - remote-endpoint = <&spdif_p0_0>; - }; - }; - }; - - /* switched by pmic_sleep */ - vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 { - compatible = "regulator-fixed"; - regulator-name = "vcc1v8_s3"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vcc_1v8>; - }; - - vcc3v3_pcie: vcc3v3-pcie-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&pcie_pwr_en>; - regulator-name = "vcc3v3_pcie"; - regulator-always-on; - regulator-boot-on; - vin-supply = <&dc_12v>; - }; - - vcc3v3_sys: vcc3v3-sys { - compatible = "regulator-fixed"; - regulator-name = "vcc3v3_sys"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vcc_sys>; - }; - - /* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */ - vcc5v0_host: vcc5v0-host-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&vcc5v0_host_en>; - regulator-name = "vcc5v0_host"; - regulator-always-on; - vin-supply = <&vcc_sys>; - }; - - vcc5v0_typec: vcc5v0-typec-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&vcc5v0_typec_en>; - regulator-name = "vcc5v0_typec"; - regulator-always-on; - vin-supply = <&vcc_sys>; - }; - - vcc_sys: vcc-sys { - compatible = "regulator-fixed"; - regulator-name = "vcc_sys"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&dc_12v>; - }; - - vdd_log: vdd-log { - compatible = "pwm-regulator"; - pwms = <&pwm2 0 25000 1>; - pwm-supply = <&vcc_sys>; - regulator-name = "vdd_log"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <430000>; - regulator-max-microvolt = <1400000>; - }; -}; - -&cpu_l0 { - cpu-supply = <&vdd_cpu_l>; -}; - -&cpu_l1 { - cpu-supply = <&vdd_cpu_l>; -}; - -&cpu_l2 { - cpu-supply = <&vdd_cpu_l>; -}; - -&cpu_l3 { - cpu-supply = <&vdd_cpu_l>; -}; - -&cpu_b0 { - cpu-supply = <&vdd_cpu_b>; -}; - -&cpu_b1 { - cpu-supply = <&vdd_cpu_b>; -}; - -&emmc_phy { - status = "okay"; -}; - -&gmac { - assigned-clocks = <&cru SCLK_RMII_SRC>; - assigned-clock-parents = <&clkin_gmac>; - clock_in_out = "input"; - phy-supply = <&vcc_lan>; - phy-mode = "rgmii"; - pinctrl-names = "default"; - pinctrl-0 = <&rgmii_pins>; - snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; - snps,reset-active-low; - snps,reset-delays-us = <0 10000 50000>; - tx_delay = <0x28>; - rx_delay = <0x11>; - status = "okay"; -}; - -&gpu { - mali-supply = <&vdd_gpu>; - status = "okay"; -}; - -&hdmi { - ddc-i2c-bus = <&i2c3>; - pinctrl-names = "default"; - pinctrl-0 = <&hdmi_cec>; - status = "okay"; -}; - -&i2c0 { - clock-frequency = <400000>; - i2c-scl-rising-time-ns = <168>; - i2c-scl-falling-time-ns = <4>; - status = "okay"; - - rk808: pmic@1b { - compatible = "rockchip,rk808"; - reg = <0x1b>; - interrupt-parent = <&gpio1>; - interrupts = <21 IRQ_TYPE_LEVEL_LOW>; - #clock-cells = <1>; - clock-output-names = "xin32k", "rk808-clkout2"; - pinctrl-names = "default"; - pinctrl-0 = <&pmic_int_l>; - rockchip,system-power-controller; - wakeup-source; - - vcc1-supply = <&vcc_sys>; - vcc2-supply = <&vcc_sys>; - vcc3-supply = <&vcc_sys>; - vcc4-supply = <&vcc_sys>; - vcc6-supply = <&vcc_sys>; - vcc7-supply = <&vcc_sys>; - vcc8-supply = <&vcc3v3_sys>; - vcc9-supply = <&vcc_sys>; - vcc10-supply = <&vcc_sys>; - vcc11-supply = <&vcc_sys>; - vcc12-supply = <&vcc3v3_sys>; - vddio-supply = <&vcc1v8_pmu>; - - regulators { - vdd_center: DCDC_REG1 { - regulator-name = "vdd_center"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1350000>; - regulator-ramp-delay = <6001>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_cpu_l: DCDC_REG2 { - regulator-name = "vdd_cpu_l"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1350000>; - regulator-ramp-delay = <6001>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_ddr: DCDC_REG3 { - regulator-name = "vcc_ddr"; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - vcc_1v8: DCDC_REG4 { - regulator-name = "vcc_1v8"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vcc1v8_dvp: LDO_REG1 { - regulator-name = "vcc1v8_dvp"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc2v8_dvp: LDO_REG2 { - regulator-name = "vcc2v8_dvp"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc1v8_pmu: LDO_REG3 { - regulator-name = "vcc1v8_pmu"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vcc_sdio: LDO_REG4 { - regulator-name = "vcc_sdio"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3000000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3000000>; - }; - }; - - vcca3v0_codec: LDO_REG5 { - regulator-name = "vcca3v0_codec"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_1v5: LDO_REG6 { - regulator-name = "vcc_1v5"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1500000>; - }; - }; - - vcca1v8_codec: LDO_REG7 { - regulator-name = "vcca1v8_codec"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_3v0: LDO_REG8 { - regulator-name = "vcc_3v0"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3000000>; - }; - }; - - vcc3v3_s3: vcc_lan: SWITCH_REG1 { - regulator-name = "vcc3v3_s3"; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc3v3_s0: SWITCH_REG2 { - regulator-name = "vcc3v3_s0"; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - }; - }; - - vdd_cpu_b: regulator@40 { - compatible = "silergy,syr827"; - reg = <0x40>; - fcs,suspend-voltage-selector = <0>; - regulator-name = "vdd_cpu_b"; - regulator-min-microvolt = <712500>; - regulator-max-microvolt = <1500000>; - regulator-ramp-delay = <1000>; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vcc_sys>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_gpu: regulator@41 { - compatible = "silergy,syr828"; - reg = <0x41>; - fcs,suspend-voltage-selector = <1>; - regulator-name = "vdd_gpu"; - regulator-min-microvolt = <712500>; - regulator-max-microvolt = <1500000>; - regulator-ramp-delay = <1000>; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vcc_sys>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; -}; - -&i2c1 { - i2c-scl-rising-time-ns = <300>; - i2c-scl-falling-time-ns = <15>; - status = "okay"; - - rt5640: rt5640@1c { - compatible = "realtek,rt5640"; - reg = <0x1c>; - clocks = <&cru SCLK_I2S_8CH_OUT>; - clock-names = "mclk"; - realtek,in1-differential; - #sound-dai-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&rt5640_hpcon>; - }; -}; - -&i2c3 { - i2c-scl-rising-time-ns = <450>; - i2c-scl-falling-time-ns = <15>; - status = "okay"; -}; - -&i2c4 { - i2c-scl-rising-time-ns = <600>; - i2c-scl-falling-time-ns = <20>; - status = "okay"; - - fusb0: typec-portc@22 { - compatible = "fcs,fusb302"; - reg = <0x22>; - interrupt-parent = <&gpio1>; - interrupts = ; - pinctrl-names = "default"; - pinctrl-0 = <&fusb0_int>; - vbus-supply = <&vcc5v0_typec>; - status = "okay"; - - connector { - compatible = "usb-c-connector"; - data-role = "host"; - label = "USB-C"; - op-sink-microwatt = <1000000>; - power-role = "dual"; - sink-pdos = - ; - source-pdos = - ; - try-power-role = "sink"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - usbc_hs: endpoint { - remote-endpoint = - <&u2phy0_typec_hs>; - }; - }; - - port@1 { - reg = <1>; - - usbc_ss: endpoint { - remote-endpoint = - <&tcphy0_typec_ss>; - }; - }; - }; - }; - }; - - accelerometer@68 { - compatible = "invensense,mpu6500"; - reg = <0x68>; - interrupt-parent = <&gpio1>; - interrupts = ; - }; -}; - -&i2s0 { - rockchip,playback-channels = <8>; - rockchip,capture-channels = <8>; - status = "okay"; -}; - -&i2s1 { - rockchip,playback-channels = <2>; - rockchip,capture-channels = <2>; - status = "okay"; -}; - -&i2s2 { - status = "okay"; -}; - -&io_domains { - status = "okay"; - - bt656-supply = <&vcc1v8_dvp>; - audio-supply = <&vcca1v8_codec>; - sdmmc-supply = <&vcc_sdio>; - gpio1830-supply = <&vcc_3v0>; -}; - -&pcie_phy { - status = "okay"; -}; - -&pcie0 { - ep-gpios = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>; - num-lanes = <4>; - pinctrl-names = "default"; - pinctrl-0 = <&pcie_clkreqn_cpm>; - status = "okay"; -}; - -&pmu_io_domains { - pmu1830-supply = <&vcc_3v0>; - status = "okay"; -}; - -&pinctrl { - buttons { - pwrbtn: pwrbtn { - rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - fusb302x { - fusb0_int: fusb0-int { - rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - ir { - ir_int: ir-int { - rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - lcd-panel { - lcd_panel_reset: lcd-panel-reset { - rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - leds { - work_led_pin: work-led-pin { - rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - diy_led_pin: diy-led-pin { - rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - pcie { - pcie_pwr_en: pcie-pwr-en { - rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - pcie_3g_drv: pcie-3g-drv { - rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - pmic { - pmic_int_l: pmic-int-l { - rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; - }; - - vsel1_pin: vsel1-pin { - rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>; - }; - - vsel2_pin: vsel2-pin { - rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; - }; - }; - - rt5640 { - rt5640_hpcon: rt5640-hpcon { - rockchip,pins = <4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - sdio-pwrseq { - wifi_enable_h: wifi-enable-h { - rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - usb-typec { - vcc5v0_typec_en: vcc5v0_typec_en { - rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - usb2 { - vcc5v0_host_en: vcc5v0-host-en { - rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - wifi { - wifi_host_wake_l: wifi-host-wake-l { - rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; -}; - -&pwm0 { - status = "okay"; -}; - -&pwm2 { - status = "okay"; -}; - -&saradc { - vref-supply = <&vcca1v8_s3>; - status = "okay"; -}; - -&sdio0 { - /* WiFi & BT combo module Ampak AP6356S */ - bus-width = <4>; - cap-sdio-irq; - cap-sd-highspeed; - keep-power-in-suspend; - mmc-pwrseq = <&sdio_pwrseq>; - non-removable; - pinctrl-names = "default"; - pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>; - sd-uhs-sdr104; - - /* Power supply */ - vqmmc-supply = <&vcc1v8_s3>; /* IO line */ - vmmc-supply = <&vcc_sdio>; /* card's power */ - - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - brcmf: wifi@1 { - reg = <1>; - compatible = "brcm,bcm4329-fmac"; - interrupt-parent = <&gpio0>; - interrupts = ; - interrupt-names = "host-wake"; - brcm,drive-strength = <5>; - pinctrl-names = "default"; - pinctrl-0 = <&wifi_host_wake_l>; - }; -}; - -&sdmmc { - bus-width = <4>; - cap-mmc-highspeed; - cap-sd-highspeed; - cd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; - disable-wp; - max-frequency = <150000000>; - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>; - status = "okay"; -}; - -&sdhci { - bus-width = <8>; - mmc-hs400-1_8v; - mmc-hs400-enhanced-strobe; - non-removable; - status = "okay"; -}; - -&spdif { - pinctrl-0 = <&spdif_bus_1>; - status = "okay"; - - spdif_p0: port { - spdif_p0_0: endpoint { - remote-endpoint = <&dit_p0_0>; - }; - }; -}; - -&tcphy0 { - status = "okay"; -}; - -&tcphy0_usb3 { - port { - tcphy0_typec_ss: endpoint { - remote-endpoint = <&usbc_ss>; - }; - }; -}; - -&tcphy1 { - status = "okay"; -}; - -&tsadc { - /* tshut mode 0:CRU 1:GPIO */ - rockchip,hw-tshut-mode = <1>; - /* tshut polarity 0:LOW 1:HIGH */ - rockchip,hw-tshut-polarity = <1>; - status = "okay"; -}; - -&u2phy0 { - status = "okay"; - - u2phy0_otg: otg-port { - status = "okay"; - }; - - u2phy0_host: host-port { - phy-supply = <&vcc5v0_host>; - status = "okay"; - }; - - port { - u2phy0_typec_hs: endpoint { - remote-endpoint = <&usbc_hs>; - }; - }; -}; - -&u2phy1 { - status = "okay"; - - u2phy1_otg: otg-port { - status = "okay"; - }; - - u2phy1_host: host-port { - phy-supply = <&vcc5v0_host>; - status = "okay"; - }; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_xfer &uart0_cts>; - status = "okay"; -}; - -&uart2 { - status = "okay"; -}; - -&usb_host0_ehci { - status = "okay"; -}; - -&usb_host0_ohci { - status = "okay"; -}; - -&usb_host1_ehci { - status = "okay"; -}; - -&usb_host1_ohci { - status = "okay"; -}; - -&usbdrd3_0 { - status = "okay"; -}; - -&usbdrd_dwc3_0 { - status = "okay"; - dr_mode = "otg"; -}; - -&usbdrd3_1 { - status = "okay"; -}; - -&usbdrd_dwc3_1 { - status = "okay"; - dr_mode = "host"; -}; - -&vopb { - status = "okay"; -}; - -&vopb_mmu { - status = "okay"; -}; - -&vopl { - status = "okay"; -}; - -&vopl_mmu { - status = "okay"; -}; diff --git a/arch/arm/dts/rk3399-gru-bob.dts b/arch/arm/dts/rk3399-gru-bob.dts deleted file mode 100644 index 1cba1d857c96..000000000000 --- a/arch/arm/dts/rk3399-gru-bob.dts +++ /dev/null @@ -1,95 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Google Gru-Bob Rev 4+ board device tree source - * - * Copyright 2018 Google, Inc - */ - -/dts-v1/; -#include "rk3399-gru-chromebook.dtsi" - -/ { - model = "Google Bob"; - compatible = "google,bob-rev13", "google,bob-rev12", - "google,bob-rev11", "google,bob-rev10", - "google,bob-rev9", "google,bob-rev8", - "google,bob-rev7", "google,bob-rev6", - "google,bob-rev5", "google,bob-rev4", - "google,bob", "google,gru", "rockchip,rk3399"; - chassis-type = "convertible"; - - edp_panel: edp-panel { - compatible = "boe,nv101wxmn51"; - backlight = <&backlight>; - power-supply = <&pp3300_disp>; - - port { - panel_in_edp: endpoint { - remote-endpoint = <&edp_out_panel>; - }; - }; - }; -}; - -&ap_i2c_ts { - touchscreen: touchscreen@10 { - compatible = "elan,ekth3500"; - reg = <0x10>; - interrupt-parent = <&gpio3>; - interrupts = <13 IRQ_TYPE_LEVEL_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&touch_int_l &touch_reset_l>; - reset-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>; - }; -}; - -&ap_i2c_tp { - trackpad: trackpad@15 { - compatible = "elan,ekth3000"; - reg = <0x15>; - interrupt-parent = <&gpio1>; - interrupts = <4 IRQ_TYPE_LEVEL_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&trackpad_int_l>; - wakeup-source; - }; -}; - -&backlight { - pwms = <&cros_ec_pwm 0>; -}; - -&cpu_alert0 { - temperature = <65000>; -}; - -&cpu_alert1 { - temperature = <70000>; -}; - -&spi0 { - status = "okay"; - - tpm@0 { - compatible = "google,cr50"; - reg = <0>; - interrupt-parent = <&gpio0>; - interrupts = <5 IRQ_TYPE_EDGE_RISING>; - pinctrl-names = "default"; - pinctrl-0 = <&h1_int_od_l>; - spi-max-frequency = <800000>; - }; -}; - -&pinctrl { - tpm { - h1_int_od_l: h1-int-od-l { - rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; -}; - -&wlan_host_wake_l { - /* Kevin has an external pull up, but Bob does not. */ - rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>; -}; diff --git a/arch/arm/dts/rk3399-gru-chromebook.dtsi b/arch/arm/dts/rk3399-gru-chromebook.dtsi deleted file mode 100644 index cacbad35cfc8..000000000000 --- a/arch/arm/dts/rk3399-gru-chromebook.dtsi +++ /dev/null @@ -1,590 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Google Gru-Chromebook shared properties - * - * Copyright 2018 Google, Inc - */ - -#include "rk3399-gru.dtsi" - -/ { - pp900_ap: pp900-ap { - compatible = "regulator-fixed"; - regulator-name = "pp900_ap"; - - /* EC turns on w/ pp900_ap_en; always on for AP */ - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <900000>; - - vin-supply = <&ppvar_sys>; - }; - - /* EC turns on w/ pp900_usb_en */ - pp900_usb: pp900-ap { - }; - - /* EC turns on w/ pp900_pcie_en */ - pp900_pcie: pp900-ap { - }; - - pp3000: pp3000 { - compatible = "regulator-fixed"; - regulator-name = "pp3000"; - pinctrl-names = "default"; - pinctrl-0 = <&pp3000_en>; - - enable-active-high; - gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>; - - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - - vin-supply = <&ppvar_sys>; - }; - - ppvar_centerlogic_pwm: ppvar-centerlogic-pwm { - compatible = "pwm-regulator"; - regulator-name = "ppvar_centerlogic_pwm"; - - pwms = <&pwm3 0 3337 0>; - pwm-supply = <&ppvar_sys>; - pwm-dutycycle-range = <100 0>; - pwm-dutycycle-unit = <100>; - - /* EC turns on w/ ppvar_centerlogic_en; always on for AP */ - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <799434>; - regulator-max-microvolt = <1049925>; - }; - - ppvar_centerlogic: ppvar-centerlogic { - compatible = "vctrl-regulator"; - regulator-name = "ppvar_centerlogic"; - - regulator-min-microvolt = <799434>; - regulator-max-microvolt = <1049925>; - - ctrl-supply = <&ppvar_centerlogic_pwm>; - ctrl-voltage-range = <799434 1049925>; - - regulator-settling-time-up-us = <378>; - min-slew-down-rate = <225>; - ovp-threshold-percent = <16>; - }; - - /* Schematics call this PPVAR even though it's fixed */ - ppvar_logic: ppvar-logic { - compatible = "regulator-fixed"; - regulator-name = "ppvar_logic"; - - /* EC turns on w/ ppvar_logic_en; always on for AP */ - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <900000>; - - vin-supply = <&ppvar_sys>; - }; - - pp1800_audio: pp1800-audio { - compatible = "regulator-fixed"; - regulator-name = "pp1800_audio"; - pinctrl-names = "default"; - pinctrl-0 = <&pp1800_audio_en>; - - enable-active-high; - gpio = <&gpio0 2 GPIO_ACTIVE_HIGH>; - - regulator-always-on; - regulator-boot-on; - - vin-supply = <&pp1800>; - }; - - /* gpio is shared with pp3300_wifi_bt */ - pp1800_pcie: pp1800-pcie { - compatible = "regulator-fixed"; - regulator-name = "pp1800_pcie"; - pinctrl-names = "default"; - pinctrl-0 = <&wlan_module_pd_l>; - - enable-active-high; - gpio = <&gpio0 4 GPIO_ACTIVE_HIGH>; - - /* - * Need to wait 1ms + ramp-up time before we can power on WiFi. - * This has been approximated as 8ms total. - */ - regulator-enable-ramp-delay = <8000>; - - vin-supply = <&pp1800>; - }; - - /* Always on; plain and simple */ - pp3000_ap: pp3000_emmc: pp3000 { - }; - - pp1500_ap_io: pp1500-ap-io { - compatible = "regulator-fixed"; - regulator-name = "pp1500_ap_io"; - pinctrl-names = "default"; - pinctrl-0 = <&pp1500_en>; - - enable-active-high; - gpio = <&gpio0 10 GPIO_ACTIVE_HIGH>; - - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - - vin-supply = <&pp1800>; - }; - - pp3300_disp: pp3300-disp { - compatible = "regulator-fixed"; - regulator-name = "pp3300_disp"; - pinctrl-names = "default"; - pinctrl-0 = <&pp3300_disp_en>; - - enable-active-high; - gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>; - - startup-delay-us = <2000>; - vin-supply = <&pp3300>; - }; - - /* EC turns on w/ pp3300_usb_en_l */ - pp3300_usb: pp3300 { - }; - - /* gpio is shared with pp1800_pcie and pinctrl is set there */ - pp3300_wifi_bt: pp3300-wifi-bt { - compatible = "regulator-fixed"; - regulator-name = "pp3300_wifi_bt"; - - enable-active-high; - gpio = <&gpio0 4 GPIO_ACTIVE_HIGH>; - - vin-supply = <&pp3300>; - }; - - /* - * This is a bit of a hack. The WiFi module should be reset at least - * 1ms after its regulators have ramped up (max rampup time is ~7ms). - * With some stretching of the imagination, we can call the 1.8V - * regulator a supply. - */ - wlan_pd_n: wlan-pd-n { - compatible = "regulator-fixed"; - regulator-name = "wlan_pd_n"; - pinctrl-names = "default"; - pinctrl-0 = <&wlan_module_reset_l>; - - enable-active-high; - gpio = <&gpio1 11 GPIO_ACTIVE_HIGH>; - - vin-supply = <&pp1800_pcie>; - }; - - backlight: backlight { - compatible = "pwm-backlight"; - enable-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>; - power-supply = <&pp3300_disp>; - pinctrl-names = "default"; - pinctrl-0 = <&bl_en>; - }; - - gpio_keys: gpio-keys { - compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = <&bt_host_wake_l>; - - wake_on_bt: key-wake-on-bt { - label = "Wake-on-Bluetooth"; - gpios = <&gpio0 3 GPIO_ACTIVE_LOW>; - linux,code = ; - wakeup-source; - }; - }; -}; - -&ppvar_bigcpu { - min-slew-down-rate = <225>; - ovp-threshold-percent = <16>; -}; - -&ppvar_litcpu { - min-slew-down-rate = <225>; - ovp-threshold-percent = <16>; -}; - -&ppvar_gpu { - min-slew-down-rate = <225>; - ovp-threshold-percent = <16>; -}; - -&cdn_dp { - extcon = <&usbc_extcon0>, <&usbc_extcon1>; -}; - -&dmc { - center-supply = <&ppvar_centerlogic>; - rockchip,pd-idle-dis-freq-hz = <800000000>; - rockchip,sr-idle-dis-freq-hz = <800000000>; - rockchip,sr-mc-gate-idle-dis-freq-hz = <800000000>; -}; - -&edp { - status = "okay"; - - /* - * eDP PHY/clk don't sync reliably at anything other than 24 MHz. Only - * set this here, because rk3399-gru.dtsi ensures we can generate this - * off GPLL=600MHz, whereas some other RK3399 boards may not. - */ - assigned-clocks = <&cru PCLK_EDP>; - assigned-clock-rates = <24000000>; - - ports { - edp_out: port@1 { - reg = <1>; - #address-cells = <1>; - #size-cells = <0>; - - edp_out_panel: endpoint@0 { - reg = <0>; - remote-endpoint = <&panel_in_edp>; - }; - }; - }; -}; - -&gpio0 { - gpio-line-names = /* GPIO0 A 0-7 */ - "AP_RTC_CLK_IN", - "EC_AP_INT_L", - "PP1800_AUDIO_EN", - "BT_HOST_WAKE_L", - "WLAN_MODULE_PD_L", - "H1_INT_OD_L", - "CENTERLOGIC_DVS_PWM", - "", - - /* GPIO0 B 0-4 */ - "WIFI_HOST_WAKE_L", - "PMUIO2_33_18_L", - "PP1500_EN", - "AP_EC_WARM_RESET_REQ", - "PP3000_EN"; -}; - -&gpio1 { - gpio-line-names = /* GPIO1 A 0-7 */ - "", - "", - "SPK_PA_EN", - "", - "TRACKPAD_INT_L", - "AP_EC_S3_S0_L", - "AP_EC_OVERTEMP", - "AP_SPI_FLASH_MISO", - - /* GPIO1 B 0-7 */ - "AP_SPI_FLASH_MOSI_R", - "AP_SPI_FLASH_CLK_R", - "AP_SPI_FLASH_CS_L_R", - "WLAN_MODULE_RESET_L", - "WIFI_DISABLE_L", - "MIC_INT", - "", - "AP_I2C_DVS_SDA", - - /* GPIO1 C 0-7 */ - "AP_I2C_DVS_SCL", - "AP_BL_EN", - /* - * AP_FLASH_WP is crossystem ABI. Schematics call it - * AP_FW_WP or CPU1_FW_WP, depending on the variant. - */ - "AP_FLASH_WP", - "LITCPU_DVS_PWM", - "AP_I2C_AUDIO_SDA", - "AP_I2C_AUDIO_SCL", - "", - "HEADSET_INT_L"; -}; - -&gpio2 { - gpio-line-names = /* GPIO2 A 0-7 */ - "", - "", - "SD_IO_PWR_EN", - "", - "", - "", - "", - "", - - /* GPIO2 B 0-7 */ - "", - "", - "", - "", - "", - "", - "", - "", - - /* GPIO2 C 0-7 */ - "", - "", - "", - "", - "AP_SPI_EC_MISO", - "AP_SPI_EC_MOSI", - "AP_SPI_EC_CLK", - "AP_SPI_EC_CS_L", - - /* GPIO2 D 0-4 */ - "BT_DEV_WAKE_L", - "", - "WIFI_PCIE_CLKREQ_L", - "WIFI_PERST_L", - "SD_PWR_3000_1800_L"; -}; - -&gpio3 { - gpio-line-names = /* GPIO3 A 0-7 */ - "", - "", - "", - "", - "AP_SPI_TPM_MISO", - "AP_SPI_TPM_MOSI_R", - "AP_SPI_TPM_CLK_R", - "AP_SPI_TPM_CS_L_R", - - /* GPIO3 B 0-7 */ - "EC_IN_RW", - "", - "AP_I2C_TP_SDA", - "AP_I2C_TP_SCL", - "AP_I2C_TP_PU_EN", - "TOUCH_INT_L", - "", - "", - - /* GPIO3 C 0-7 */ - "", - "", - "", - "", - "", - "", - "", - "", - - /* GPIO3 D 0-7 */ - "I2S0_SCLK", - "I2S0_LRCK_RX", - "I2S0_LRCK_TX", - "I2S0_SDI_0", - "I2S0_SDI_1", - "", - "I2S0_SDO_1", - "I2S0_SDO_0"; -}; - -&gpio4 { - gpio-line-names = /* GPIO4 A 0-7 */ - "I2S_MCLK", - "AP_I2C_MIC_SDA", - "AP_I2C_MIC_SCL", - "", - "", - "", - "", - "", - - /* GPIO4 B 0-7 */ - "", - "", - "", - "", - "", - "", - "", - "", - - /* GPIO4 C 0-7 */ - "AP_I2C_TS_SDA", - "AP_I2C_TS_SCL", - "GPU_DVS_PWM", - "UART_DBG_TX_AP_RX", - "UART_AP_TX_DBG_RX", - "", - "BIGCPU_DVS_PWM", - "EDP_HPD_3V0", - - /* GPIO4 D 0-5 */ - "SD_CARD_DET_L", - "USB_DP_HPD", - "TOUCH_RESET_L", - "PP3300_DISP_EN", - "", - "SD_SLOT_PWR_EN"; -}; - -ap_i2c_mic: &i2c1 { - status = "okay"; - - clock-frequency = <400000>; - - /* These are relatively safe rise/fall times */ - i2c-scl-falling-time-ns = <50>; - i2c-scl-rising-time-ns = <300>; - - headsetcodec: rt5514@57 { - compatible = "realtek,rt5514"; - reg = <0x57>; - realtek,dmic-init-delay-ms = <20>; - }; -}; - -ap_i2c_tp: &i2c5 { - status = "okay"; - - clock-frequency = <400000>; - - /* These are relatively safe rise/fall times */ - i2c-scl-falling-time-ns = <50>; - i2c-scl-rising-time-ns = <300>; - - /* - * Note strange pullup enable. Apparently this avoids leakage but - * still allows us to get nice 4.7K pullups for high speed i2c - * transfers. Basically we want the pullup on whenever the ap is - * alive, so the "en" pin just gets set to output high. - */ - pinctrl-0 = <&i2c5_xfer &ap_i2c_tp_pu_en>; -}; - -&cros_ec { - cros_ec_pwm: pwm { - compatible = "google,cros-ec-pwm"; - #pwm-cells = <1>; - }; - - usbc_extcon1: extcon1 { - compatible = "google,extcon-usbc-cros-ec"; - google,usb-port-id = <1>; - }; -}; - -&sound { - rockchip,codec = <&max98357a &headsetcodec - &codec &wacky_spi_audio &cdn_dp>; -}; - -&spi2 { - wacky_spi_audio: spi2@0 { - compatible = "realtek,rt5514"; - reg = <0>; - interrupt-parent = <&gpio1>; - interrupts = <13 IRQ_TYPE_LEVEL_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&mic_int>; - /* May run faster once verified. */ - spi-max-frequency = <10000000>; - wakeup-source; - }; -}; - -&pci_rootport { - mvl_wifi: wifi@0,0 { - compatible = "pci1b4b,2b42"; - reg = <0x0000 0x0 0x0 0x0 0x0>; - interrupt-parent = <&gpio0>; - interrupts = <8 IRQ_TYPE_LEVEL_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&wlan_host_wake_l>; - wakeup-source; - }; -}; - -&tcphy1 { - status = "okay"; - extcon = <&usbc_extcon1>; -}; - -&u2phy1 { - status = "okay"; -}; - -&usb_host0_ehci { - status = "okay"; -}; - -&usb_host1_ehci { - status = "okay"; -}; - -&usb_host1_ohci { - status = "okay"; -}; - -&usbdrd3_1 { - status = "okay"; - extcon = <&usbc_extcon1>; -}; - -&usbdrd_dwc3_1 { - status = "okay"; - dr_mode = "host"; -}; - -&pinctrl { - discrete-regulators { - pp1500_en: pp1500-en { - rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO - &pcfg_pull_none>; - }; - - pp1800_audio_en: pp1800-audio-en { - rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO - &pcfg_pull_down>; - }; - - pp3000_en: pp3000-en { - rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO - &pcfg_pull_none>; - }; - - pp3300_disp_en: pp3300-disp-en { - rockchip,pins = <4 RK_PD3 RK_FUNC_GPIO - &pcfg_pull_none>; - }; - - wlan_module_pd_l: wlan-module-pd-l { - rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO - &pcfg_pull_down>; - }; - }; -}; - -&wifi { - wifi_perst_l: wifi-perst-l { - rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - wlan_host_wake_l: wlan-host-wake-l { - /* Kevin has an external pull up, but Bob does not */ - rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; - }; -}; diff --git a/arch/arm/dts/rk3399-gru-kevin.dts b/arch/arm/dts/rk3399-gru-kevin.dts deleted file mode 100644 index 2cc9b3386c16..000000000000 --- a/arch/arm/dts/rk3399-gru-kevin.dts +++ /dev/null @@ -1,328 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Google Gru-Kevin Rev 6+ board device tree source - * - * Copyright 2016-2017 Google, Inc - */ - -/dts-v1/; -#include "rk3399-gru-chromebook.dtsi" -#include - -/* - * Kevin-specific things - * - * Things in this section should use names from Kevin schematic since no - * equivalent exists in Gru schematic. If referring to signals that exist - * in Gru we use the Gru names, though. Confusing enough for you? - */ -/ { - model = "Google Kevin"; - compatible = "google,kevin-rev15", "google,kevin-rev14", - "google,kevin-rev13", "google,kevin-rev12", - "google,kevin-rev11", "google,kevin-rev10", - "google,kevin-rev9", "google,kevin-rev8", - "google,kevin-rev7", "google,kevin-rev6", - "google,kevin", "google,gru", "rockchip,rk3399"; - chassis-type = "convertible"; - - /* Power tree */ - - p3_3v_dig: p3-3v-dig { - compatible = "regulator-fixed"; - regulator-name = "p3.3v_dig"; - pinctrl-names = "default"; - pinctrl-0 = <&cpu3_pen_pwr_en>; - - enable-active-high; - gpio = <&gpio4 30 GPIO_ACTIVE_HIGH>; - vin-supply = <&pp3300>; - }; - - edp_panel: edp-panel { - compatible = "sharp,lq123p1jx31"; - backlight = <&backlight>; - power-supply = <&pp3300_disp>; - - panel-timing { - clock-frequency = <266666667>; - hactive = <2400>; - hfront-porch = <48>; - hback-porch = <84>; - hsync-len = <32>; - hsync-active = <0>; - vactive = <1600>; - vfront-porch = <3>; - vback-porch = <120>; - vsync-len = <10>; - vsync-active = <0>; - }; - - port { - panel_in_edp: endpoint { - remote-endpoint = <&edp_out_panel>; - }; - }; - }; - - thermistor_ppvar_bigcpu: thermistor-ppvar-bigcpu { - compatible = "murata,ncp15wb473"; - pullup-uv = <1800000>; - pullup-ohm = <25500>; - pulldown-ohm = <0>; - io-channels = <&saradc 2>; - #thermal-sensor-cells = <0>; - }; - - thermistor_ppvar_litcpu: thermistor-ppvar-litcpu { - compatible = "murata,ncp15wb473"; - pullup-uv = <1800000>; - pullup-ohm = <25500>; - pulldown-ohm = <0>; - io-channels = <&saradc 3>; - #thermal-sensor-cells = <0>; - }; -}; - -&backlight { - pwms = <&cros_ec_pwm 1>; -}; - -&gpio_keys { - pinctrl-names = "default"; - pinctrl-0 = <&bt_host_wake_l>, <&cpu1_pen_eject>; - - switch-pen-insert { - label = "Pen Insert"; - /* Insert = low, eject = high */ - gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; - linux,code = ; - linux,input-type = ; - wakeup-source; - }; -}; - -&thermal_zones { - bigcpu_reg_thermal: bigcpu-reg-thermal { - polling-delay-passive = <100>; /* milliseconds */ - polling-delay = <1000>; /* milliseconds */ - thermal-sensors = <&thermistor_ppvar_bigcpu 0>; - sustainable-power = <4000>; - - ppvar_bigcpu_trips: trips { - ppvar_bigcpu_on: ppvar-bigcpu-on { - temperature = <40000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "passive"; - }; - - ppvar_bigcpu_alert: ppvar-bigcpu-alert { - temperature = <50000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "passive"; - }; - - ppvar_bigcpu_crit: ppvar-bigcpu-crit { - temperature = <90000>; /* millicelsius */ - hysteresis = <0>; /* millicelsius */ - type = "critical"; - }; - }; - - cooling-maps { - map0 { - trip = <&ppvar_bigcpu_alert>; - cooling-device = - <&cpu_l0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu_l1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu_l2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu_l3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - contribution = <4096>; - }; - map1 { - trip = <&ppvar_bigcpu_alert>; - cooling-device = - <&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu_b1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - contribution = <1024>; - }; - }; - }; - - litcpu_reg_thermal: litcpu-reg-thermal { - polling-delay-passive = <100>; /* milliseconds */ - polling-delay = <1000>; /* milliseconds */ - thermal-sensors = <&thermistor_ppvar_litcpu 0>; - sustainable-power = <4000>; - - ppvar_litcpu_trips: trips { - ppvar_litcpu_on: ppvar-litcpu-on { - temperature = <40000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "passive"; - }; - - ppvar_litcpu_alert: ppvar-litcpu-alert { - temperature = <50000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "passive"; - }; - - ppvar_litcpu_crit: ppvar-litcpu-crit { - temperature = <90000>; /* millicelsius */ - hysteresis = <0>; /* millicelsius */ - type = "critical"; - }; - }; - }; -}; - -ap_i2c_tpm: &i2c0 { - status = "okay"; - - clock-frequency = <400000>; - - /* These are relatively safe rise/fall times. */ - i2c-scl-falling-time-ns = <50>; - i2c-scl-rising-time-ns = <300>; - - tpm: tpm@20 { - compatible = "infineon,slb9645tt"; - reg = <0x20>; - powered-while-suspended; - }; -}; - -ap_i2c_dig: &i2c2 { - status = "okay"; - - clock-frequency = <400000>; - - /* These are relatively safe rise/fall times. */ - i2c-scl-falling-time-ns = <50>; - i2c-scl-rising-time-ns = <300>; - - digitizer: digitizer@9 { - /* wacom,w9013 */ - compatible = "hid-over-i2c"; - reg = <0x9>; - pinctrl-names = "default"; - pinctrl-0 = <&cpu1_dig_irq_l &cpu1_dig_pdct_l>; - - vdd-supply = <&p3_3v_dig>; - post-power-on-delay-ms = <100>; - - interrupt-parent = <&gpio2>; - interrupts = <4 IRQ_TYPE_LEVEL_LOW>; - - hid-descr-addr = <0x1>; - }; -}; - -/* Adjustments to things in the gru baseboard */ - -&ap_i2c_tp { - trackpad@4a { - compatible = "atmel,maxtouch"; - reg = <0x4a>; - pinctrl-names = "default"; - pinctrl-0 = <&trackpad_int_l>; - interrupt-parent = <&gpio1>; - interrupts = <4 IRQ_TYPE_LEVEL_LOW>; - linux,gpio-keymap = ; - wakeup-source; - }; -}; - -&ap_i2c_ts { - touchscreen@4b { - compatible = "atmel,maxtouch"; - reg = <0x4b>; - pinctrl-names = "default"; - pinctrl-0 = <&touch_int_l>; - interrupt-parent = <&gpio3>; - interrupts = <13 IRQ_TYPE_LEVEL_LOW>; - }; -}; - -&ppvar_bigcpu_pwm { - regulator-min-microvolt = <798674>; - regulator-max-microvolt = <1302172>; -}; - -&ppvar_bigcpu { - regulator-min-microvolt = <798674>; - regulator-max-microvolt = <1302172>; - ctrl-voltage-range = <798674 1302172>; -}; - -&ppvar_litcpu_pwm { - regulator-min-microvolt = <799065>; - regulator-max-microvolt = <1303738>; -}; - -&ppvar_litcpu { - regulator-min-microvolt = <799065>; - regulator-max-microvolt = <1303738>; - ctrl-voltage-range = <799065 1303738>; -}; - -&ppvar_gpu_pwm { - regulator-min-microvolt = <785782>; - regulator-max-microvolt = <1217729>; -}; - -&ppvar_gpu { - regulator-min-microvolt = <785782>; - regulator-max-microvolt = <1217729>; - ctrl-voltage-range = <785782 1217729>; -}; - -&ppvar_centerlogic_pwm { - regulator-min-microvolt = <800069>; - regulator-max-microvolt = <1049692>; -}; - -&ppvar_centerlogic { - regulator-min-microvolt = <800069>; - regulator-max-microvolt = <1049692>; - ctrl-voltage-range = <800069 1049692>; -}; - -&saradc { - status = "okay"; - vref-supply = <&pp1800_ap_io>; -}; - -&mvl_wifi { - marvell,wakeup-pin = <14>; /* GPIO_14 on Marvell */ -}; - -&pinctrl { - digitizer { - /* Has external pullup */ - cpu1_dig_irq_l: cpu1-dig-irq-l { - rockchip,pins = <2 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - /* Has external pullup */ - cpu1_dig_pdct_l: cpu1-dig-pdct-l { - rockchip,pins = <2 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - discrete-regulators { - cpu3_pen_pwr_en: cpu3-pen-pwr-en { - rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - pen { - cpu1_pen_eject: cpu1-pen-eject { - rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; -}; diff --git a/arch/arm/dts/rk3399-gru.dtsi b/arch/arm/dts/rk3399-gru.dtsi deleted file mode 100644 index d90fe4d40d48..000000000000 --- a/arch/arm/dts/rk3399-gru.dtsi +++ /dev/null @@ -1,865 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Google Gru (and derivatives) board device tree source - * - * Copyright 2016-2017 Google, Inc - */ - -#include -#include "rk3399.dtsi" -#include "rk3399-op1-opp.dtsi" - -/ { - aliases { - mmc0 = &sdmmc; - mmc1 = &sdhci; - }; - - chosen { - stdout-path = "serial2:115200n8"; - }; - - /* - * Power Tree - * - * In general an attempt is made to include all rails called out by - * the schematic as long as those rails interact in some way with - * the AP. AKA: - * - Rails that only connect to the EC (or devices that the EC talks to) - * are not included. - * - Rails _are_ included if the rails go to the AP even if the AP - * doesn't currently care about them / they are always on. The idea - * here is that it makes it easier to map to the schematic or extend - * later. - * - * If two rails are substantially the same from the AP's point of - * view, though, we won't create a full fixed regulator. We'll just - * put the child rail as an alias of the parent rail. Sometimes rails - * look the same to the AP because one of these is true: - * - The EC controls the enable and the EC always enables a rail as - * long as the AP is running. - * - The rails are actually connected to each other by a jumper and - * the distinction is just there to add clarity/flexibility to the - * schematic. - */ - - ppvar_sys: ppvar-sys { - compatible = "regulator-fixed"; - regulator-name = "ppvar_sys"; - regulator-always-on; - regulator-boot-on; - }; - - pp1200_lpddr: pp1200-lpddr { - compatible = "regulator-fixed"; - regulator-name = "pp1200_lpddr"; - - /* EC turns on w/ lpddr_pwr_en; always on for AP */ - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - - vin-supply = <&ppvar_sys>; - }; - - pp1800: pp1800 { - compatible = "regulator-fixed"; - regulator-name = "pp1800"; - - /* Always on when ppvar_sys shows power good */ - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - vin-supply = <&ppvar_sys>; - }; - - pp3300: pp3300 { - compatible = "regulator-fixed"; - regulator-name = "pp3300"; - - /* Always on; plain and simple */ - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - vin-supply = <&ppvar_sys>; - }; - - pp5000: pp5000 { - compatible = "regulator-fixed"; - regulator-name = "pp5000"; - - /* EC turns on w/ pp5000_en; always on for AP */ - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - - vin-supply = <&ppvar_sys>; - }; - - ppvar_bigcpu_pwm: ppvar-bigcpu-pwm { - compatible = "pwm-regulator"; - regulator-name = "ppvar_bigcpu_pwm"; - - pwms = <&pwm1 0 3337 0>; - pwm-supply = <&ppvar_sys>; - pwm-dutycycle-range = <100 0>; - pwm-dutycycle-unit = <100>; - - /* EC turns on w/ ap_core_en; always on for AP */ - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <800107>; - regulator-max-microvolt = <1302232>; - }; - - ppvar_bigcpu: ppvar-bigcpu { - compatible = "vctrl-regulator"; - regulator-name = "ppvar_bigcpu"; - - regulator-min-microvolt = <800107>; - regulator-max-microvolt = <1302232>; - - ctrl-supply = <&ppvar_bigcpu_pwm>; - ctrl-voltage-range = <800107 1302232>; - - regulator-settling-time-up-us = <322>; - }; - - ppvar_litcpu_pwm: ppvar-litcpu-pwm { - compatible = "pwm-regulator"; - regulator-name = "ppvar_litcpu_pwm"; - - pwms = <&pwm2 0 3337 0>; - pwm-supply = <&ppvar_sys>; - pwm-dutycycle-range = <100 0>; - pwm-dutycycle-unit = <100>; - - /* EC turns on w/ ap_core_en; always on for AP */ - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <797743>; - regulator-max-microvolt = <1307837>; - }; - - ppvar_litcpu: ppvar-litcpu { - compatible = "vctrl-regulator"; - regulator-name = "ppvar_litcpu"; - - regulator-min-microvolt = <797743>; - regulator-max-microvolt = <1307837>; - - ctrl-supply = <&ppvar_litcpu_pwm>; - ctrl-voltage-range = <797743 1307837>; - - regulator-settling-time-up-us = <384>; - }; - - ppvar_gpu_pwm: ppvar-gpu-pwm { - compatible = "pwm-regulator"; - regulator-name = "ppvar_gpu_pwm"; - - pwms = <&pwm0 0 3337 0>; - pwm-supply = <&ppvar_sys>; - pwm-dutycycle-range = <100 0>; - pwm-dutycycle-unit = <100>; - - /* EC turns on w/ ap_core_en; always on for AP */ - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <786384>; - regulator-max-microvolt = <1217747>; - }; - - ppvar_gpu: ppvar-gpu { - compatible = "vctrl-regulator"; - regulator-name = "ppvar_gpu"; - - regulator-min-microvolt = <786384>; - regulator-max-microvolt = <1217747>; - - ctrl-supply = <&ppvar_gpu_pwm>; - ctrl-voltage-range = <786384 1217747>; - - regulator-settling-time-up-us = <390>; - }; - - /* EC turns on w/ pp900_ddrpll_en */ - pp900_ddrpll: pp900-ap { - }; - - /* EC turns on w/ pp900_pll_en */ - pp900_pll: pp900-ap { - }; - - /* EC turns on w/ pp900_pmu_en */ - pp900_pmu: pp900-ap { - }; - - /* EC turns on w/ pp1800_s0_en_l */ - pp1800_ap_io: pp1800_emmc: pp1800_nfc: pp1800_s0: pp1800 { - }; - - /* EC turns on w/ pp1800_avdd_en_l */ - pp1800_avdd: pp1800 { - }; - - /* EC turns on w/ pp1800_lid_en_l */ - pp1800_lid: pp1800_mic: pp1800 { - }; - - /* EC turns on w/ lpddr_pwr_en */ - pp1800_lpddr: pp1800 { - }; - - /* EC turns on w/ pp1800_pmu_en_l */ - pp1800_pmu: pp1800 { - }; - - /* EC turns on w/ pp1800_usb_en_l */ - pp1800_usb: pp1800 { - }; - - pp3000_sd_slot: pp3000-sd-slot { - compatible = "regulator-fixed"; - regulator-name = "pp3000_sd_slot"; - pinctrl-names = "default"; - pinctrl-0 = <&sd_slot_pwr_en>; - - enable-active-high; - gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>; - - vin-supply = <&pp3000>; - }; - - /* - * Technically, this is a small abuse of 'regulator-gpio'; this - * regulator is a mux between pp1800 and pp3300. pp1800 and pp3300 are - * always on though, so it is sufficient to simply control the mux - * here. - */ - ppvar_sd_card_io: ppvar-sd-card-io { - compatible = "regulator-gpio"; - regulator-name = "ppvar_sd_card_io"; - pinctrl-names = "default"; - pinctrl-0 = <&sd_io_pwr_en &sd_pwr_1800_sel>; - - enable-active-high; - enable-gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>; - gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>; - states = <1800000 0x1>, - <3000000 0x0>; - - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3000000>; - }; - - /* EC turns on w/ pp3300_trackpad_en_l */ - pp3300_trackpad: pp3300-trackpad { - }; - - /* EC turns on w/ usb_a_en */ - pp5000_usb_a_vbus: pp5000 { - }; - - ap_rtc_clk: ap-rtc-clk { - compatible = "fixed-clock"; - clock-frequency = <32768>; - clock-output-names = "xin32k"; - #clock-cells = <0>; - }; - - max98357a: max98357a { - compatible = "maxim,max98357a"; - pinctrl-names = "default"; - pinctrl-0 = <&sdmode_en>; - sdmode-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; - sdmode-delay = <2>; - #sound-dai-cells = <0>; - status = "okay"; - }; - - sound: sound { - compatible = "rockchip,rk3399-gru-sound"; - rockchip,cpu = <&i2s0 &spdif>; - }; -}; - -&cdn_dp { - status = "okay"; -}; - -/* - * Set some suspend operating points to avoid OVP in suspend - * - * When we go into S3 ARM Trusted Firmware will transition our PWM regulators - * from wherever they're at back to the "default" operating point (whatever - * voltage we get when we set the PWM pins to "input"). - * - * This quick transition under light load has the possibility to trigger the - * regulator "over voltage protection" (OVP). - * - * To make extra certain that we don't hit this OVP at suspend time, we'll - * transition to a voltage that's much closer to the default (~1.0 V) so that - * there will not be a big jump. Technically we only need to get within 200 mV - * of the default voltage, but the speed here should be fast enough and we need - * suspend/resume to be rock solid. - */ - -&cluster0_opp { - opp05 { - opp-suspend; - }; -}; - -&cluster1_opp { - opp06 { - opp-suspend; - }; -}; - -&cpu_l0 { - cpu-supply = <&ppvar_litcpu>; -}; - -&cpu_l1 { - cpu-supply = <&ppvar_litcpu>; -}; - -&cpu_l2 { - cpu-supply = <&ppvar_litcpu>; -}; - -&cpu_l3 { - cpu-supply = <&ppvar_litcpu>; -}; - -&cpu_b0 { - cpu-supply = <&ppvar_bigcpu>; -}; - -&cpu_b1 { - cpu-supply = <&ppvar_bigcpu>; -}; - - -&cru { - assigned-clocks = - <&cru PLL_GPLL>, <&cru PLL_CPLL>, - <&cru PLL_NPLL>, - <&cru ACLK_PERIHP>, <&cru HCLK_PERIHP>, - <&cru PCLK_PERIHP>, - <&cru ACLK_PERILP0>, <&cru HCLK_PERILP0>, - <&cru PCLK_PERILP0>, <&cru ACLK_CCI>, - <&cru HCLK_PERILP1>, <&cru PCLK_PERILP1>, - <&cru ACLK_VIO>, <&cru ACLK_HDCP>, - <&cru ACLK_GIC_PRE>, - <&cru PCLK_DDR>; - assigned-clock-rates = - <600000000>, <800000000>, - <1000000000>, - <150000000>, <75000000>, - <37500000>, - <100000000>, <100000000>, - <50000000>, <800000000>, - <100000000>, <50000000>, - <400000000>, <400000000>, - <200000000>, - <200000000>; -}; - -&dfi { - status = "okay"; -}; - -&dmc { - status = "okay"; - - rockchip,pd-idle-ns = <160>; - rockchip,sr-idle-ns = <10240>; - rockchip,sr-mc-gate-idle-ns = <40960>; - rockchip,srpd-lite-idle-ns = <61440>; - rockchip,standby-idle-ns = <81920>; - - rockchip,ddr3_odt_dis_freq = <666000000>; - rockchip,lpddr3_odt_dis_freq = <666000000>; - rockchip,lpddr4_odt_dis_freq = <666000000>; - - rockchip,sr-mc-gate-idle-dis-freq-hz = <1000000000>; - rockchip,srpd-lite-idle-dis-freq-hz = <0>; - rockchip,standby-idle-dis-freq-hz = <928000000>; -}; - -&dmc_opp_table { - opp03 { - opp-suspend; - }; -}; - -&emmc_phy { - status = "okay"; -}; - -&gpu { - mali-supply = <&ppvar_gpu>; - status = "okay"; -}; - -ap_i2c_ts: &i2c3 { - status = "okay"; - - clock-frequency = <400000>; - - /* These are relatively safe rise/fall times */ - i2c-scl-falling-time-ns = <50>; - i2c-scl-rising-time-ns = <300>; -}; - -ap_i2c_audio: &i2c8 { - status = "okay"; - - clock-frequency = <400000>; - - /* These are relatively safe rise/fall times */ - i2c-scl-falling-time-ns = <50>; - i2c-scl-rising-time-ns = <300>; - - codec: da7219@1a { - compatible = "dlg,da7219"; - reg = <0x1a>; - interrupt-parent = <&gpio1>; - interrupts = <23 IRQ_TYPE_LEVEL_LOW>; - clocks = <&cru SCLK_I2S_8CH_OUT>; - clock-names = "mclk"; - dlg,micbias-lvl = <2600>; - dlg,mic-amp-in-sel = "diff"; - pinctrl-names = "default"; - pinctrl-0 = <&headset_int_l>; - VDD-supply = <&pp1800>; - VDDMIC-supply = <&pp3300>; - VDDIO-supply = <&pp1800>; - - da7219_aad { - dlg,adc-1bit-rpt = <1>; - dlg,btn-avg = <4>; - dlg,btn-cfg = <50>; - dlg,mic-det-thr = <500>; - dlg,jack-ins-deb = <20>; - dlg,jack-det-rate = "32ms_64ms"; - dlg,jack-rem-deb = <1>; - - dlg,a-d-btn-thr = <0xa>; - dlg,d-b-btn-thr = <0x16>; - dlg,b-c-btn-thr = <0x21>; - dlg,c-mic-btn-thr = <0x3E>; - }; - }; -}; - -&i2s0 { - status = "okay"; -}; - -&io_domains { - status = "okay"; - - audio-supply = <&pp1800_audio>; /* APIO5_VDD; 3d 4a */ - bt656-supply = <&pp1800_ap_io>; /* APIO2_VDD; 2a 2b */ - gpio1830-supply = <&pp3000_ap>; /* APIO4_VDD; 4c 4d */ - sdmmc-supply = <&ppvar_sd_card_io>; /* SDMMC0_VDD; 4b */ -}; - -&pcie0 { - status = "okay"; - - ep-gpios = <&gpio2 27 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&pcie_clkreqn_cpm>, <&wifi_perst_l>; - vpcie3v3-supply = <&pp3300_wifi_bt>; - vpcie1v8-supply = <&wlan_pd_n>; /* HACK: see &wlan_pd_n */ - vpcie0v9-supply = <&pp900_pcie>; - - pci_rootport: pcie@0,0 { - reg = <0x0000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - device_type = "pci"; - }; -}; - -&pcie_phy { - status = "okay"; -}; - -&pmu_io_domains { - status = "okay"; - - pmu1830-supply = <&pp1800_pmu>; /* PMUIO2_VDD */ -}; - -&pwm0 { - status = "okay"; -}; - -&pwm1 { - status = "okay"; -}; - -&pwm2 { - status = "okay"; -}; - -&pwm3 { - status = "okay"; -}; - -&sdhci { - /* - * Signal integrity isn't great at 200 MHz and 150 MHz (DDR) gives the - * same (or nearly the same) performance for all eMMC that are intended - * to be used. - */ - assigned-clock-rates = <150000000>; - - bus-width = <8>; - mmc-hs400-1_8v; - mmc-hs400-enhanced-strobe; - non-removable; - status = "okay"; -}; - -&sdmmc { - status = "okay"; - - /* - * Note: configure "sdmmc_cd" as card detect even though it's actually - * hooked to ground. Because we specified "cd-gpios" below dw_mmc - * should be ignoring card detect anyway. Specifying the pin as - * sdmmc_cd means that even if you've got GRF_SOC_CON7[12] (force_jtag) - * turned on that the system will still make sure the port is - * configured as SDMMC and not JTAG. - */ - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_cd_pin - &sdmmc_bus4>; - - bus-width = <4>; - cap-mmc-highspeed; - cap-sd-highspeed; - cd-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>; - disable-wp; - sd-uhs-sdr12; - sd-uhs-sdr25; - sd-uhs-sdr50; - sd-uhs-sdr104; - vmmc-supply = <&pp3000_sd_slot>; - vqmmc-supply = <&ppvar_sd_card_io>; -}; - -&spdif { - status = "okay"; - - /* - * SPDIF is routed internally to DP; we either don't use these pins, or - * mux them to something else. - */ - /delete-property/ pinctrl-0; - /delete-property/ pinctrl-names; -}; - -&spi1 { - status = "okay"; - - pinctrl-names = "default", "sleep"; - pinctrl-1 = <&spi1_sleep>; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - - /* May run faster once verified. */ - spi-max-frequency = <10000000>; - }; -}; - -&spi2 { - status = "okay"; -}; - -&spi5 { - status = "okay"; - - cros_ec: ec@0 { - compatible = "google,cros-ec-spi"; - reg = <0>; - interrupt-parent = <&gpio0>; - interrupts = <1 IRQ_TYPE_LEVEL_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&ec_ap_int_l>; - spi-max-frequency = <3000000>; - - i2c_tunnel: i2c-tunnel { - compatible = "google,cros-ec-i2c-tunnel"; - google,remote-bus = <4>; - #address-cells = <1>; - #size-cells = <0>; - }; - - usbc_extcon0: extcon0 { - compatible = "google,extcon-usbc-cros-ec"; - google,usb-port-id = <0>; - }; - }; -}; - -&tsadc { - status = "okay"; - - rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */ - rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */ -}; - -&tcphy0 { - status = "okay"; - extcon = <&usbc_extcon0>; -}; - -&u2phy0 { - status = "okay"; -}; - -&u2phy0_host { - status = "okay"; -}; - -&u2phy1_host { - status = "okay"; -}; - -&u2phy0_otg { - status = "okay"; -}; - -&u2phy1_otg { - status = "okay"; -}; - -&uart2 { - status = "okay"; -}; - -&usb_host0_ohci { - status = "okay"; -}; - -&usbdrd3_0 { - status = "okay"; - extcon = <&usbc_extcon0>; -}; - -&usbdrd_dwc3_0 { - status = "okay"; - dr_mode = "host"; -}; - -&vopb { - status = "okay"; -}; - -&vopb_mmu { - status = "okay"; -}; - -&vopl { - status = "okay"; -}; - -&vopl_mmu { - status = "okay"; -}; - -#include -#include - -&pinctrl { - /* - * pinctrl settings for pins that have no real owners. - * - * At the moment settings are identical for S0 and S3, but if we later - * need to configure things differently for S3 we'll adjust here. - */ - pinctrl-names = "default"; - pinctrl-0 = < - &ap_pwroff /* AP will auto-assert this when in S3 */ - &clk_32k /* This pin is always 32k on gru boards */ - >; - - pcfg_output_low: pcfg-output-low { - output-low; - }; - - pcfg_output_high: pcfg-output-high { - output-high; - }; - - pcfg_pull_none_8ma: pcfg-pull-none-8ma { - bias-disable; - drive-strength = <8>; - }; - - backlight-enable { - bl_en: bl-en { - rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - cros-ec { - ec_ap_int_l: ec-ap-int-l { - rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - discrete-regulators { - sd_io_pwr_en: sd-io-pwr-en { - rockchip,pins = <2 RK_PA2 RK_FUNC_GPIO - &pcfg_pull_none>; - }; - - sd_pwr_1800_sel: sd-pwr-1800-sel { - rockchip,pins = <2 RK_PD4 RK_FUNC_GPIO - &pcfg_pull_none>; - }; - - sd_slot_pwr_en: sd-slot-pwr-en { - rockchip,pins = <4 RK_PD5 RK_FUNC_GPIO - &pcfg_pull_none>; - }; - }; - - codec { - /* Has external pullup */ - headset_int_l: headset-int-l { - rockchip,pins = <1 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - mic_int: mic-int { - rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_down>; - }; - }; - - max98357a { - sdmode_en: sdmode-en { - rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_down>; - }; - }; - - pcie { - pcie_clkreqn_cpm: pci-clkreqn-cpm { - /* - * Since our pcie doesn't support ClockPM(CPM), we want - * to hack this as gpio, so the EP could be able to - * de-assert it along and make ClockPM(CPM) work. - */ - rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - sdmmc { - /* - * We run sdmmc at max speed; bump up drive strength. - * We also have external pulls, so disable the internal ones. - */ - sdmmc_bus4: sdmmc-bus4 { - rockchip,pins = - <4 RK_PB0 1 &pcfg_pull_none_8ma>, - <4 RK_PB1 1 &pcfg_pull_none_8ma>, - <4 RK_PB2 1 &pcfg_pull_none_8ma>, - <4 RK_PB3 1 &pcfg_pull_none_8ma>; - }; - - sdmmc_clk: sdmmc-clk { - rockchip,pins = - <4 RK_PB4 1 &pcfg_pull_none_8ma>; - }; - - sdmmc_cmd: sdmmc-cmd { - rockchip,pins = - <4 RK_PB5 1 &pcfg_pull_none_8ma>; - }; - - /* - * In our case the official card detect is hooked to ground - * to avoid getting access to JTAG just by sticking something - * in the SD card slot (see the force_jtag bit in the TRM). - * - * We still configure it as card detect because it doesn't - * hurt and dw_mmc will ignore it. We make sure to disable - * the pull though so we don't burn needless power. - */ - sdmmc_cd: sdmmc-cd { - rockchip,pins = - <0 RK_PA7 1 &pcfg_pull_none>; - }; - - /* This is where we actually hook up CD; has external pull */ - sdmmc_cd_pin: sdmmc-cd-pin { - rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - spi1 { - spi1_sleep: spi1-sleep { - /* - * Pull down SPI1 CLK/CS/RX/TX during suspend, to - * prevent leakage. - */ - rockchip,pins = <1 RK_PB1 RK_FUNC_GPIO &pcfg_pull_down>, - <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_down>, - <1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_down>, - <1 RK_PB0 RK_FUNC_GPIO &pcfg_pull_down>; - }; - }; - - touchscreen { - touch_int_l: touch-int-l { - rockchip,pins = <3 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>; - }; - - touch_reset_l: touch-reset-l { - rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - trackpad { - ap_i2c_tp_pu_en: ap-i2c-tp-pu-en { - rockchip,pins = <3 RK_PB4 RK_FUNC_GPIO &pcfg_output_high>; - }; - - trackpad_int_l: trackpad-int-l { - rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - wifi: wifi { - wlan_module_reset_l: wlan-module-reset-l { - rockchip,pins = <1 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - bt_host_wake_l: bt-host-wake-l { - /* Kevin has an external pull up, but Gru does not */ - rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - write-protect { - ap_fw_wp: ap-fw-wp { - rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; -}; diff --git a/arch/arm/dts/rk3399-khadas-edge-captain.dts b/arch/arm/dts/rk3399-khadas-edge-captain.dts deleted file mode 100644 index 99ac4ed0f13f..000000000000 --- a/arch/arm/dts/rk3399-khadas-edge-captain.dts +++ /dev/null @@ -1,31 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2019 Shenzhen Wesion Technology Co., Ltd. - * (https://www.khadas.com) - */ - -/dts-v1/; -#include "rk3399-khadas-edge.dtsi" - -/ { - model = "Khadas Edge-Captain"; - compatible = "khadas,edge-captain", "rockchip,rk3399"; - - aliases { - ethernet0 = &gmac; - }; -}; - -&gmac { - status = "okay"; -}; - -&pcie_phy { - status = "okay"; -}; - -&pcie0 { - ep-gpios = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>; - num-lanes = <4>; - status = "okay"; -}; diff --git a/arch/arm/dts/rk3399-khadas-edge-v.dts b/arch/arm/dts/rk3399-khadas-edge-v.dts deleted file mode 100644 index e12e7b4d64ca..000000000000 --- a/arch/arm/dts/rk3399-khadas-edge-v.dts +++ /dev/null @@ -1,31 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2019 Shenzhen Wesion Technology Co., Ltd. - * (https://www.khadas.com) - */ - -/dts-v1/; -#include "rk3399-khadas-edge.dtsi" - -/ { - model = "Khadas Edge-V"; - compatible = "khadas,edge-v", "rockchip,rk3399"; - - aliases { - ethernet0 = &gmac; - }; -}; - -&gmac { - status = "okay"; -}; - -&pcie_phy { - status = "okay"; -}; - -&pcie0 { - ep-gpios = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>; - num-lanes = <4>; - status = "okay"; -}; diff --git a/arch/arm/dts/rk3399-khadas-edge.dts b/arch/arm/dts/rk3399-khadas-edge.dts deleted file mode 100644 index 31616e7ad89d..000000000000 --- a/arch/arm/dts/rk3399-khadas-edge.dts +++ /dev/null @@ -1,13 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2019 Shenzhen Wesion Technology Co., Ltd. - * (https://www.khadas.com) - */ - -/dts-v1/; -#include "rk3399-khadas-edge.dtsi" - -/ { - model = "Khadas Edge"; - compatible = "khadas,edge", "rockchip,rk3399"; -}; diff --git a/arch/arm/dts/rk3399-khadas-edge.dtsi b/arch/arm/dts/rk3399-khadas-edge.dtsi deleted file mode 100644 index 9d9297bc5f04..000000000000 --- a/arch/arm/dts/rk3399-khadas-edge.dtsi +++ /dev/null @@ -1,837 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2019 Shenzhen Wesion Technology Co., Ltd. - * (https://www.khadas.com) - */ - -/dts-v1/; -#include -#include -#include -#include "rk3399.dtsi" -#include "rk3399-opp.dtsi" - -/ { - aliases { - mmc0 = &sdio0; - mmc1 = &sdmmc; - mmc2 = &sdhci; - }; - - chosen { - stdout-path = "serial2:1500000n8"; - }; - - clkin_gmac: external-gmac-clock { - compatible = "fixed-clock"; - clock-frequency = <125000000>; - clock-output-names = "clkin_gmac"; - #clock-cells = <0>; - }; - - sdio_pwrseq: sdio-pwrseq { - compatible = "mmc-pwrseq-simple"; - clocks = <&rk808 1>; - clock-names = "ext_clock"; - pinctrl-names = "default"; - pinctrl-0 = <&wifi_enable_h>; - - /* - * On the module itself this is one of these (depending - * on the actual card populated): - * - SDIO_RESET_L_WL_REG_ON - * - PDN (power down when low) - */ - reset-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_LOW>; - }; - - /* switched by pmic_sleep */ - vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 { - compatible = "regulator-fixed"; - regulator-name = "vcc1v8_s3"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vcc_1v8>; - }; - - vcc3v3_pcie: vcc3v3-pcie-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc3v3_pcie"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vsys_3v3>; - }; - - /* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */ - vcc5v0_host: vcc5v0-host-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&vcc5v0_host_en>; - regulator-name = "vcc5v0_host"; - regulator-always-on; - vin-supply = <&vsys_5v0>; - }; - - vdd_log: vdd-log { - compatible = "pwm-regulator"; - pwms = <&pwm2 0 25000 1>; - pwm-supply = <&vsys_3v3>; - regulator-name = "vdd_log"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1400000>; - }; - - vsys: vsys { - compatible = "regulator-fixed"; - regulator-name = "vsys"; - regulator-always-on; - regulator-boot-on; - }; - - vsys_3v3: vsys-3v3 { - compatible = "regulator-fixed"; - regulator-name = "vsys_3v3"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vsys>; - }; - - vsys_5v0: vsys-5v0 { - compatible = "regulator-fixed"; - regulator-name = "vsys_5v0"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vsys>; - }; - - adc-keys { - compatible = "adc-keys"; - io-channels = <&saradc 1>; - io-channel-names = "buttons"; - keyup-threshold-microvolt = <1800000>; - poll-interval = <100>; - - button-recovery { - label = "Recovery"; - linux,code = ; - press-threshold-microvolt = <18000>; - }; - }; - - gpio-keys { - compatible = "gpio-keys"; - autorepeat; - pinctrl-names = "default"; - pinctrl-0 = <&pwrbtn>; - - key-power { - debounce-interval = <100>; - gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; - label = "GPIO Key Power"; - linux,code = ; - wakeup-source; - }; - }; - - ir-receiver { - compatible = "gpio-ir-receiver"; - gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_LOW>; - linux,rc-map-name = "rc-khadas"; - pinctrl-names = "default"; - pinctrl-0 = <&ir_rx>; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&sys_led_pin>, <&user_led_pin>; - - sys_led: led-0 { - label = "sys_led"; - linux,default-trigger = "heartbeat"; - gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; - }; - - user_led: led-1 { - label = "user_led"; - default-state = "off"; - gpios = <&gpio4 RK_PD0 GPIO_ACTIVE_HIGH>; - }; - }; - - fan: pwm-fan { - compatible = "pwm-fan"; - cooling-levels = <0 150 200 255>; - #cooling-cells = <2>; - fan-supply = <&vsys_5v0>; - pwms = <&pwm0 0 40000 0>; - }; -}; - -&cpu_l0 { - cpu-supply = <&vdd_cpu_l>; -}; - -&cpu_l1 { - cpu-supply = <&vdd_cpu_l>; -}; - -&cpu_l2 { - cpu-supply = <&vdd_cpu_l>; -}; - -&cpu_l3 { - cpu-supply = <&vdd_cpu_l>; -}; - -&cpu_b0 { - cpu-supply = <&vdd_cpu_b>; -}; - -&cpu_b1 { - cpu-supply = <&vdd_cpu_b>; -}; - -&cpu_thermal { - trips { - cpu_warm: cpu_warm { - temperature = <55000>; - hysteresis = <2000>; - type = "active"; - }; - - cpu_hot: cpu_hot { - temperature = <65000>; - hysteresis = <2000>; - type = "active"; - }; - }; - - cooling-maps { - map2 { - trip = <&cpu_warm>; - cooling-device = <&fan THERMAL_NO_LIMIT 1>; - }; - - map3 { - trip = <&cpu_hot>; - cooling-device = <&fan 2 THERMAL_NO_LIMIT>; - }; - }; -}; - -&emmc_phy { - status = "okay"; -}; - -&gmac { - assigned-clocks = <&cru SCLK_RMII_SRC>; - assigned-clock-parents = <&clkin_gmac>; - clock_in_out = "input"; - phy-supply = <&vcc_lan>; - phy-mode = "rgmii"; - pinctrl-names = "default"; - pinctrl-0 = <&rgmii_pins>; - snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; - snps,reset-active-low; - snps,reset-delays-us = <0 10000 50000>; - tx_delay = <0x28>; - rx_delay = <0x11>; -}; - -&gpu { - mali-supply = <&vdd_gpu>; - status = "okay"; -}; - -&gpu_thermal { - trips { - gpu_warm: gpu_warm { - temperature = <55000>; - hysteresis = <2000>; - type = "active"; - }; - - gpu_hot: gpu_hot { - temperature = <65000>; - hysteresis = <2000>; - type = "active"; - }; - }; - - cooling-maps { - map1 { - trip = <&gpu_warm>; - cooling-device = <&fan THERMAL_NO_LIMIT 1>; - }; - - map2 { - trip = <&gpu_hot>; - cooling-device = <&fan 2 THERMAL_NO_LIMIT>; - }; - }; -}; - -&hdmi { - ddc-i2c-bus = <&i2c3>; - pinctrl-names = "default"; - pinctrl-0 = <&hdmi_cec>; - status = "okay"; -}; - -&hdmi_sound { - status = "okay"; -}; - -&i2c3 { - i2c-scl-rising-time-ns = <450>; - i2c-scl-falling-time-ns = <15>; - status = "okay"; -}; - -&i2c4 { - clock-frequency = <400000>; - i2c-scl-rising-time-ns = <168>; - i2c-scl-falling-time-ns = <4>; - status = "okay"; - - rk808: pmic@1b { - compatible = "rockchip,rk808"; - reg = <0x1b>; - interrupt-parent = <&gpio1>; - interrupts = ; - #clock-cells = <1>; - clock-output-names = "xin32k", "rk808-clkout2"; - pinctrl-names = "default"; - pinctrl-0 = <&pmic_int_l>; - rockchip,system-power-controller; - wakeup-source; - - vcc1-supply = <&vsys_3v3>; - vcc2-supply = <&vsys_3v3>; - vcc3-supply = <&vsys_3v3>; - vcc4-supply = <&vsys_3v3>; - vcc6-supply = <&vsys_3v3>; - vcc7-supply = <&vsys_3v3>; - vcc8-supply = <&vsys_3v3>; - vcc9-supply = <&vsys_3v3>; - vcc10-supply = <&vsys_3v3>; - vcc11-supply = <&vsys_3v3>; - vcc12-supply = <&vsys_3v3>; - vddio-supply = <&vcc_1v8>; - - regulators { - vdd_center: DCDC_REG1 { - regulator-name = "vdd_center"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1350000>; - regulator-ramp-delay = <6001>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_cpu_l: DCDC_REG2 { - regulator-name = "vdd_cpu_l"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1350000>; - regulator-ramp-delay = <6001>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_ddr: DCDC_REG3 { - regulator-name = "vcc_ddr"; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - vcc_1v8: DCDC_REG4 { - regulator-name = "vcc_1v8"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vcc1v8_apio2: LDO_REG1 { - regulator-name = "vcc1v8_apio2"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_vldo2: LDO_REG2 { - regulator-name = "vcc_vldo2"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc1v8_pmupll: LDO_REG3 { - regulator-name = "vcc1v8_pmupll"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vccio_sd: LDO_REG4 { - regulator-name = "vccio_sd"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3000000>; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3000000>; - }; - }; - - vcc_vldo5: LDO_REG5 { - regulator-name = "vcc_vldo5"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_1v5: LDO_REG6 { - regulator-name = "vcc_1v5"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1500000>; - }; - }; - - vcc1v8_codec: LDO_REG7 { - regulator-name = "vcc1v8_codec"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_3v0: LDO_REG8 { - regulator-name = "vcc_3v0"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3000000>; - }; - }; - - vcc3v3_s3: vcc_lan: SWITCH_REG1 { - regulator-name = "vcc3v3_s3"; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc3v3_s0: SWITCH_REG2 { - regulator-name = "vcc3v3_s0"; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - }; - }; - - vdd_cpu_b: regulator@40 { - compatible = "silergy,syr827"; - reg = <0x40>; - fcs,suspend-voltage-selector = <1>; - pinctrl-names = "default"; - pinctrl-0 = <&cpu_b_sleep>; - regulator-name = "vdd_cpu_b"; - regulator-min-microvolt = <712500>; - regulator-max-microvolt = <1500000>; - regulator-ramp-delay = <1000>; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vsys_3v3>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_gpu: regulator@41 { - compatible = "silergy,syr828"; - reg = <0x41>; - fcs,suspend-voltage-selector = <1>; - pinctrl-names = "default"; - pinctrl-0 = <&gpu_sleep>; - regulator-name = "vdd_gpu"; - regulator-min-microvolt = <712500>; - regulator-max-microvolt = <1500000>; - regulator-ramp-delay = <1000>; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vsys_3v3>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; -}; - -&i2c8 { - clock-frequency = <400000>; - i2c-scl-rising-time-ns = <160>; - i2c-scl-falling-time-ns = <30>; - status = "okay"; -}; - -&i2s0 { - rockchip,playback-channels = <8>; - rockchip,capture-channels = <8>; - status = "okay"; -}; - -&i2s1 { - rockchip,playback-channels = <2>; - rockchip,capture-channels = <2>; - status = "okay"; -}; - -&i2s2 { - status = "okay"; -}; - -&io_domains { - bt656-supply = <&vcc1v8_apio2>; - audio-supply = <&vcc1v8_codec>; - sdmmc-supply = <&vccio_sd>; - gpio1830-supply = <&vcc_3v0>; - status = "okay"; -}; - -&pmu_io_domains { - pmu1830-supply = <&vcc_1v8>; - status = "okay"; -}; - -&pinctrl { - bt { - bt_host_wake_l: bt-host-wake-l { - rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - bt_reg_on_h: bt-reg-on-h { - rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - bt_wake_l: bt-wake-l { - rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - buttons { - pwrbtn: pwrbtn { - rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - ir { - ir_rx: ir-rx { - rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - leds { - sys_led_pin: sys-led-pin { - rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - user_led_pin: user-led-pin { - rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - pmic { - pmic_int_l: pmic-int-l { - rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>; - }; - - cpu_b_sleep: cpu-b-sleep { - rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_down>; - }; - - gpu_sleep: gpu-sleep { - rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_down>; - }; - }; - - sdio-pwrseq { - wifi_enable_h: wifi-enable-h { - rockchip,pins = <2 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - usb2 { - vcc5v0_host_en: vcc5v0-host-en { - rockchip,pins = <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - wifi { - wifi_host_wake_l: wifi-host-wake-l { - rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; -}; - -&pwm0 { - status = "okay"; -}; - -&pwm2 { - status = "okay"; -}; - -&saradc { - vref-supply = <&vcca1v8_s3>; - status = "okay"; -}; - -&sdio0 { - /* WiFi & BT combo module Ampak AP6356S */ - bus-width = <4>; - cap-sdio-irq; - cap-sd-highspeed; - keep-power-in-suspend; - mmc-pwrseq = <&sdio_pwrseq>; - non-removable; - pinctrl-names = "default"; - pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>; - sd-uhs-sdr104; - vqmmc-supply = <&vcc1v8_s3>; - vmmc-supply = <&vccio_sd>; - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - brcmf: wifi@1 { - reg = <1>; - compatible = "brcm,bcm4329-fmac"; - interrupt-parent = <&gpio0>; - interrupts = ; - interrupt-names = "host-wake"; - brcm,drive-strength = <5>; - pinctrl-names = "default"; - pinctrl-0 = <&wifi_host_wake_l>; - }; -}; - -&sdmmc { - bus-width = <4>; - cap-mmc-highspeed; - cap-sd-highspeed; - cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>; - disable-wp; - max-frequency = <150000000>; - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>; - status = "okay"; -}; - -&sdhci { - bus-width = <8>; - mmc-hs400-1_8v; - non-removable; - status = "okay"; -}; - -&spi1 { - status = "okay"; - - spiflash: flash@0 { - compatible = "winbond,w25q128fw", "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <104000000>; - }; -}; - -&tcphy0 { - status = "okay"; -}; - -&tcphy1 { - status = "okay"; -}; - -&tsadc { - /* tshut mode 0:CRU 1:GPIO */ - rockchip,hw-tshut-mode = <1>; - /* tshut polarity 0:LOW 1:HIGH */ - rockchip,hw-tshut-polarity = <1>; - status = "okay"; -}; - -&u2phy0 { - status = "okay"; - - u2phy0_otg: otg-port { - status = "okay"; - }; - - u2phy0_host: host-port { - phy-supply = <&vcc5v0_host>; - status = "okay"; - }; -}; - -&u2phy1 { - status = "okay"; - - u2phy1_otg: otg-port { - status = "okay"; - }; - - u2phy1_host: host-port { - phy-supply = <&vcc5v0_host>; - status = "okay"; - }; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_xfer &uart0_rts &uart0_cts>; - status = "okay"; - - bluetooth { - compatible = "brcm,bcm43438-bt"; - clocks = <&rk808 1>; - clock-names = "lpo"; - device-wakeup-gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>; - host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>; - shutdown-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>; - max-speed = <4000000>; - pinctrl-names = "default"; - pinctrl-0 = <&bt_reg_on_h &bt_host_wake_l &bt_wake_l>; - vbat-supply = <&vsys_3v3>; - vddio-supply = <&vcc_1v8>; - }; -}; - -&uart2 { - status = "okay"; -}; - -&usb_host0_ehci { - status = "okay"; -}; - -&usb_host0_ohci { - status = "okay"; -}; - -&usb_host1_ehci { - status = "okay"; -}; - -&usb_host1_ohci { - status = "okay"; -}; - -&usbdrd3_0 { - status = "okay"; -}; - -&usbdrd_dwc3_0 { - status = "okay"; - dr_mode = "otg"; -}; - -&usbdrd3_1 { - status = "okay"; -}; - -&usbdrd_dwc3_1 { - status = "okay"; - dr_mode = "host"; -}; - -&vopb { - status = "okay"; -}; - -&vopb_mmu { - status = "okay"; -}; - -&vopl { - status = "okay"; -}; - -&vopl_mmu { - status = "okay"; -}; diff --git a/arch/arm/dts/rk3399-leez-p710.dts b/arch/arm/dts/rk3399-leez-p710.dts deleted file mode 100644 index cb69e2145fa9..000000000000 --- a/arch/arm/dts/rk3399-leez-p710.dts +++ /dev/null @@ -1,653 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2019 Andy Yan - */ - -/dts-v1/; -#include -#include -#include -#include "rk3399.dtsi" -#include "rk3399-opp.dtsi" - -/ { - model = "Leez RK3399 P710"; - compatible = "leez,p710", "rockchip,rk3399"; - - aliases { - ethernet0 = &gmac; - mmc0 = &sdio0; - mmc1 = &sdmmc; - mmc2 = &sdhci; - }; - - chosen { - stdout-path = "serial2:1500000n8"; - }; - - clkin_gmac: external-gmac-clock { - compatible = "fixed-clock"; - clock-frequency = <125000000>; - clock-output-names = "clkin_gmac"; - #clock-cells = <0>; - }; - - sdio_pwrseq: sdio-pwrseq { - compatible = "mmc-pwrseq-simple"; - clocks = <&rk808 1>; - clock-names = "ext_clock"; - pinctrl-names = "default"; - pinctrl-0 = <&wifi_reg_on_h>; - reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; - }; - - dc5v_adp: dc5v-adp { - compatible = "regulator-fixed"; - regulator-name = "dc5v_adapter"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; - - vcc3v3_lan: vcc3v3-lan { - compatible = "regulator-fixed"; - regulator-name = "vcc3v3_lan"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vcc3v3_sys>; - }; - - vcc3v3_sys: vcc3v3-sys { - compatible = "regulator-fixed"; - regulator-name = "vcc3v3_sys"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vcc5v0_sys>; - }; - - vcc5v0_host0: vcc5v0_host1: vcc5v0-host { - compatible = "regulator-fixed"; - regulator-name = "vcc5v0_host"; - regulator-boot-on; - regulator-always-on; - regulator-min-microvolt = <5500000>; - regulator-max-microvolt = <5500000>; - vin-supply = <&vcc5v0_sys>; - }; - - vcc5v0_host3: vcc5v0-host3 { - compatible = "regulator-fixed"; - regulator-name = "vcc5v0_host3"; - enable-active-high; - gpio = <&gpio2 RK_PA2 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&vcc5v0_host3_en>; - regulator-always-on; - vin-supply = <&vcc5v0_sys>; - }; - - vcc5v0_sys: vcc5v0-sys { - compatible = "regulator-fixed"; - regulator-name = "vcc5v0_sys"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&dc5v_adp>; - }; - - vdd_log: vdd-log { - compatible = "pwm-regulator"; - pwms = <&pwm2 0 25000 1>; - pwm-supply = <&vcc5v0_sys>; - regulator-name = "vdd_log"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1400000>; - }; -}; - -&cpu_l0 { - cpu-supply = <&vdd_cpu_l>; -}; - -&cpu_l1 { - cpu-supply = <&vdd_cpu_l>; -}; - -&cpu_l2 { - cpu-supply = <&vdd_cpu_l>; -}; - -&cpu_l3 { - cpu-supply = <&vdd_cpu_l>; -}; - -&cpu_b0 { - cpu-supply = <&vdd_cpu_b>; -}; - -&cpu_b1 { - cpu-supply = <&vdd_cpu_b>; -}; - -&emmc_phy { - status = "okay"; -}; - -&gmac { - assigned-clocks = <&cru SCLK_RMII_SRC>; - assigned-clock-parents = <&clkin_gmac>; - clock_in_out = "input"; - phy-supply = <&vcc3v3_lan>; - phy-mode = "rgmii"; - pinctrl-names = "default"; - pinctrl-0 = <&rgmii_pins>; - snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; - snps,reset-active-low; - snps,reset-delays-us = <0 10000 50000>; - tx_delay = <0x28>; - rx_delay = <0x11>; - status = "okay"; -}; - -&gpu { - mali-supply = <&vdd_gpu>; - status = "okay"; -}; - -&hdmi { - ddc-i2c-bus = <&i2c7>; - pinctrl-names = "default"; - pinctrl-0 = <&hdmi_cec>; - status = "okay"; -}; - -&hdmi_sound { - status = "okay"; -}; - -&i2c0 { - clock-frequency = <400000>; - i2c-scl-rising-time-ns = <168>; - i2c-scl-falling-time-ns = <4>; - status = "okay"; - - rk808: pmic@1b { - compatible = "rockchip,rk808"; - reg = <0x1b>; - interrupt-parent = <&gpio1>; - interrupts = <21 IRQ_TYPE_LEVEL_LOW>; - #clock-cells = <1>; - clock-output-names = "xin32k", "rk808-clkout2"; - pinctrl-names = "default"; - pinctrl-0 = <&pmic_int_l>; - rockchip,system-power-controller; - wakeup-source; - - vcc1-supply = <&vcc5v0_sys>; - vcc2-supply = <&vcc5v0_sys>; - vcc3-supply = <&vcc5v0_sys>; - vcc4-supply = <&vcc5v0_sys>; - vcc6-supply = <&vcc5v0_sys>; - vcc7-supply = <&vcc5v0_sys>; - vcc8-supply = <&vcc3v3_sys>; - vcc9-supply = <&vcc5v0_sys>; - vcc10-supply = <&vcc5v0_sys>; - vcc11-supply = <&vcc5v0_sys>; - vcc12-supply = <&vcc3v3_sys>; - vddio-supply = <&vcc_1v8>; - - regulators { - vdd_center: DCDC_REG1 { - regulator-name = "vdd_center"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1350000>; - regulator-ramp-delay = <6001>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_cpu_l: DCDC_REG2 { - regulator-name = "vdd_cpu_l"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1350000>; - regulator-ramp-delay = <6001>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_ddr: DCDC_REG3 { - regulator-name = "vcc_ddr"; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - vcc_1v8: DCDC_REG4 { - regulator-name = "vcc_1v8"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vcc1v8_dvp: LDO_REG1 { - regulator-name = "vcc1v8_dvp"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc1v8_hdmi: LDO_REG2 { - regulator-name = "vcc1v8_hdmi"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcca_1v8: LDO_REG3 { - regulator-name = "vcca_1v8"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vccio_sd: LDO_REG4 { - regulator-name = "vccio_sd"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3000000>; - }; - }; - - vcca3v0_codec: LDO_REG5 { - regulator-name = "vcca3v0_codec"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_1v5: LDO_REG6 { - regulator-name = "vcc_1v5"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1500000>; - }; - }; - - vcc0v9_hdmi: LDO_REG7 { - regulator-name = "vcc0v9_hdmi"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <900000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_3v0: LDO_REG8 { - regulator-name = "vcc_3v0"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3000000>; - }; - }; - }; - }; - - vdd_cpu_b: regulator@40 { - compatible = "silergy,syr827"; - reg = <0x40>; - fcs,suspend-voltage-selector = <1>; - pinctrl-names = "default"; - pinctrl-0 = <&vsel1_pin>; - regulator-name = "vdd_cpu_b"; - regulator-min-microvolt = <712500>; - regulator-max-microvolt = <1500000>; - regulator-ramp-delay = <1000>; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vcc5v0_sys>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_gpu: regulator@41 { - compatible = "silergy,syr828"; - reg = <0x41>; - fcs,suspend-voltage-selector = <1>; - pinctrl-names = "default"; - pinctrl-0 = <&vsel2_pin>; - regulator-name = "vdd_gpu"; - regulator-min-microvolt = <712500>; - regulator-max-microvolt = <1500000>; - regulator-ramp-delay = <1000>; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vcc5v0_sys>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; -}; - -&i2c1 { - i2c-scl-rising-time-ns = <300>; - i2c-scl-falling-time-ns = <15>; - status = "okay"; -}; - -&i2c3 { - i2c-scl-rising-time-ns = <450>; - i2c-scl-falling-time-ns = <15>; - status = "okay"; -}; - -&i2c4 { - i2c-scl-rising-time-ns = <600>; - i2c-scl-falling-time-ns = <20>; - status = "okay"; -}; - -&i2c7 { - status = "okay"; -}; - -&i2s0 { - rockchip,playback-channels = <8>; - rockchip,capture-channels = <8>; - status = "okay"; -}; - -&i2s1 { - rockchip,playback-channels = <2>; - rockchip,capture-channels = <2>; - status = "okay"; -}; - -&i2s2 { - status = "okay"; -}; - -&io_domains { - status = "okay"; - - bt656-supply = <&vcc1v8_dvp>; - audio-supply = <&vcc_1v8>; - sdmmc-supply = <&vccio_sd>; - gpio1830-supply = <&vcc_3v0>; -}; - -&pmu_io_domains { - status = "okay"; - pmu1830-supply = <&vcc_3v0>; -}; - -&pinctrl { - bt { - bt_reg_on_h: bt-reg-on-h { - rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - bt_host_wake_l: bt-host-wake-l { - rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - bt_wake_l: bt-wake-l { - rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - pmic { - pmic_int_l: pmic-int-l { - rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; - }; - - vsel1_pin: vsel1-pin { - rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; - }; - - vsel2_pin: vsel2-pin { - rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; - }; - }; - - usb2 { - vcc5v0_host3_en: vcc5v0-host3-en { - rockchip,pins = <2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - wifi { - wifi_reg_on_h: wifi-reg-on-h { - rockchip,pins = - <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - wifi_host_wake_l: wifi-host-wake-l { - rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; -}; - -&pwm2 { - status = "okay"; -}; - -&saradc { - status = "okay"; - - vref-supply = <&vcc_1v8>; -}; - -&sdio0 { - #address-cells = <1>; - #size-cells = <0>; - bus-width = <4>; - clock-frequency = <50000000>; - cap-sdio-irq; - cap-sd-highspeed; - keep-power-in-suspend; - mmc-pwrseq = <&sdio_pwrseq>; - non-removable; - pinctrl-names = "default"; - pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>; - sd-uhs-sdr104; - status = "okay"; - - brcmf: wifi@1 { - compatible = "brcm,bcm4329-fmac"; - reg = <1>; - interrupt-parent = <&gpio0>; - interrupts = ; - interrupt-names = "host-wake"; - pinctrl-names = "default"; - pinctrl-0 = <&wifi_host_wake_l>; - }; -}; - -&sdhci { - bus-width = <8>; - mmc-hs400-1_8v; - mmc-hs400-enhanced-strobe; - non-removable; - status = "okay"; -}; - -&sdmmc { - bus-width = <4>; - cap-mmc-highspeed; - cap-sd-highspeed; - cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>; - disable-wp; - max-frequency = <150000000>; - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc_clk &sdmmc_cd &sdmmc_cmd &sdmmc_bus4>; - status = "okay"; -}; - -&tcphy0 { - status = "okay"; -}; - -&tcphy1 { - status = "okay"; -}; - -&tsadc { - status = "okay"; - - /* tshut mode 0:CRU 1:GPIO */ - rockchip,hw-tshut-mode = <1>; - /* tshut polarity 0:LOW 1:HIGH */ - rockchip,hw-tshut-polarity = <1>; -}; - -&u2phy0 { - status = "okay"; - - u2phy0_otg: otg-port { - status = "okay"; - }; - - u2phy0_host: host-port { - phy-supply = <&vcc5v0_host0>; - status = "okay"; - }; -}; - -&u2phy1 { - status = "okay"; - - u2phy1_otg: otg-port { - status = "okay"; - }; - - u2phy1_host: host-port { - phy-supply = <&vcc5v0_host1>; - status = "okay"; - }; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; - status = "okay"; - - bluetooth { - compatible = "brcm,bcm43438-bt"; - clocks = <&rk808 1>; - clock-names = "ext_clock"; - device-wakeup-gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>; - host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>; - shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_reg_on_h>; - }; -}; - -&uart2 { - status = "okay"; -}; - -&usb_host0_ehci { - status = "okay"; -}; - -&usb_host0_ohci { - status = "okay"; -}; - -&usb_host1_ehci { - status = "okay"; -}; - -&usb_host1_ohci { - status = "okay"; -}; - -&usbdrd3_0 { - status = "okay"; -}; - -&usbdrd_dwc3_0 { - status = "okay"; - dr_mode = "otg"; -}; - -&usbdrd3_1 { - status = "okay"; -}; - -&usbdrd_dwc3_1 { - status = "okay"; - dr_mode = "host"; -}; - -&vopb { - status = "okay"; -}; - -&vopb_mmu { - status = "okay"; -}; - -&vopl { - status = "okay"; -}; - -&vopl_mmu { - status = "okay"; -}; diff --git a/arch/arm/dts/rk3399-nanopc-t4.dts b/arch/arm/dts/rk3399-nanopc-t4.dts deleted file mode 100644 index 3bf8f959e42c..000000000000 --- a/arch/arm/dts/rk3399-nanopc-t4.dts +++ /dev/null @@ -1,137 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * FriendlyElec NanoPC-T4 board device tree source - * - * Copyright (c) 2018 FriendlyElec Computer Tech. Co., Ltd. - * (http://www.friendlyarm.com) - * - * Copyright (c) 2018 Collabora Ltd. - */ - -/dts-v1/; -#include "rk3399-nanopi4.dtsi" - -/ { - model = "FriendlyElec NanoPC-T4"; - compatible = "friendlyarm,nanopc-t4", "rockchip,rk3399"; - - vcc12v0_sys: vcc12v0-sys { - compatible = "regulator-fixed"; - regulator-always-on; - regulator-boot-on; - regulator-max-microvolt = <12000000>; - regulator-min-microvolt = <12000000>; - regulator-name = "vcc12v0_sys"; - }; - - vcc5v0_host0: vcc5v0-host0 { - compatible = "regulator-fixed"; - regulator-always-on; - regulator-boot-on; - regulator-name = "vcc5v0_host0"; - vin-supply = <&vcc5v0_sys>; - }; - - adc-keys { - compatible = "adc-keys"; - io-channels = <&saradc 1>; - io-channel-names = "buttons"; - keyup-threshold-microvolt = <1800000>; - poll-interval = <100>; - - button-recovery { - label = "Recovery"; - linux,code = ; - press-threshold-microvolt = <18000>; - }; - }; - - ir-receiver { - compatible = "gpio-ir-receiver"; - gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&ir_rx>; - }; - - fan: pwm-fan { - compatible = "pwm-fan"; - /* - * With 20KHz PWM and an EVERCOOL EC4007H12SA fan, these levels - * work out to 0, ~1200, ~3000, and 5000RPM respectively. - */ - cooling-levels = <0 12 18 255>; - #cooling-cells = <2>; - fan-supply = <&vcc12v0_sys>; - pwms = <&pwm1 0 50000 0>; - }; -}; - -&cpu_thermal { - trips { - cpu_warm: cpu_warm { - temperature = <55000>; - hysteresis = <2000>; - type = "active"; - }; - - cpu_hot: cpu_hot { - temperature = <65000>; - hysteresis = <2000>; - type = "active"; - }; - }; - - cooling-maps { - map2 { - trip = <&cpu_warm>; - cooling-device = <&fan THERMAL_NO_LIMIT 1>; - }; - - map3 { - trip = <&cpu_hot>; - cooling-device = <&fan 2 THERMAL_NO_LIMIT>; - }; - }; -}; - -&pcie0 { - ep-gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_HIGH>; - num-lanes = <4>; - vpcie3v3-supply = <&vcc3v3_sys>; -}; - -&pinctrl { - ir { - ir_rx: ir-rx { - /* external pullup to VCC3V3_SYS, despite being 1.8V :/ */ - rockchip,pins = <0 RK_PA6 1 &pcfg_pull_none>; - }; - }; -}; - -&sdhci { - mmc-hs400-1_8v; - mmc-hs400-enhanced-strobe; -}; - -&u2phy0_host { - phy-supply = <&vcc5v0_host0>; -}; - -&u2phy1_host { - phy-supply = <&vcc5v0_host0>; -}; - -&vcc5v0_sys { - vin-supply = <&vcc12v0_sys>; -}; - -&vcc3v3_sys { - vin-supply = <&vcc12v0_sys>; -}; - -&vbus_typec { - enable-active-high; - gpios = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; - vin-supply = <&vcc5v0_sys>; -}; diff --git a/arch/arm/dts/rk3399-nanopi-m4.dts b/arch/arm/dts/rk3399-nanopi-m4.dts deleted file mode 100644 index 60358ab8c7df..000000000000 --- a/arch/arm/dts/rk3399-nanopi-m4.dts +++ /dev/null @@ -1,66 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * FriendlyElec NanoPi M4 board device tree source - * - * Copyright (c) 2018 FriendlyElec Computer Tech. Co., Ltd. - * (http://www.friendlyarm.com) - * - * Copyright (c) 2018 Collabora Ltd. - * Copyright (c) 2019 Arm Ltd. - */ - -/dts-v1/; -#include "rk3399-nanopi4.dtsi" - -/ { - model = "FriendlyElec NanoPi M4"; - compatible = "friendlyarm,nanopi-m4", "rockchip,rk3399"; - - vdd_5v: vdd-5v { - compatible = "regulator-fixed"; - regulator-name = "vdd_5v"; - regulator-always-on; - regulator-boot-on; - }; - - vcc5v0_core: vcc5v0-core { - compatible = "regulator-fixed"; - regulator-name = "vcc5v0_core"; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vdd_5v>; - }; - - vcc5v0_usb1: vcc5v0-usb1 { - compatible = "regulator-fixed"; - regulator-name = "vcc5v0_usb1"; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vcc5v0_sys>; - }; - - vcc5v0_usb2: vcc5v0-usb2 { - compatible = "regulator-fixed"; - regulator-name = "vcc5v0_usb2"; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vcc5v0_sys>; - }; -}; - -&vcc3v3_sys { - vin-supply = <&vcc5v0_core>; -}; - -&u2phy0_host { - phy-supply = <&vcc5v0_usb1>; -}; - -&u2phy1_host { - phy-supply = <&vcc5v0_usb2>; -}; - -&vbus_typec { - regulator-always-on; - vin-supply = <&vdd_5v>; -}; diff --git a/arch/arm/dts/rk3399-nanopi-m4b.dts b/arch/arm/dts/rk3399-nanopi-m4b.dts deleted file mode 100644 index 65cb21837b0c..000000000000 --- a/arch/arm/dts/rk3399-nanopi-m4b.dts +++ /dev/null @@ -1,52 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * FriendlyElec NanoPi M4B board device tree source - * - * Copyright (c) 2020 Chen-Yu Tsai - */ - -/dts-v1/; -#include "rk3399-nanopi-m4.dts" - -/ { - model = "FriendlyElec NanoPi M4B"; - compatible = "friendlyarm,nanopi-m4b", "rockchip,rk3399"; - - adc-keys { - compatible = "adc-keys"; - io-channels = <&saradc 1>; - io-channel-names = "buttons"; - keyup-threshold-microvolt = <1500000>; - poll-interval = <100>; - - button-recovery { - label = "Recovery"; - linux,code = ; - press-threshold-microvolt = <18000>; - }; - }; -}; - -/* No USB type-C PD power manager */ -/delete-node/ &fusb0; - -&i2c4 { - status = "disabled"; -}; - -&u2phy0_host { - phy-supply = <&vcc5v0_usb2>; -}; - -&u2phy0_otg { - phy-supply = <&vbus_typec>; -}; - -&u2phy1_otg { - phy-supply = <&vcc5v0_usb1>; -}; - -&vbus_typec { - enable-active-high; - gpios = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; -}; diff --git a/arch/arm/dts/rk3399-nanopi-neo4.dts b/arch/arm/dts/rk3399-nanopi-neo4.dts deleted file mode 100644 index 195410b089b9..000000000000 --- a/arch/arm/dts/rk3399-nanopi-neo4.dts +++ /dev/null @@ -1,50 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (C) 2019 Amarula Solutions B.V. - * Author: Jagan Teki - */ - -/dts-v1/; - -#include "rk3399-nanopi4.dtsi" - -/ { - model = "FriendlyARM NanoPi NEO4"; - compatible = "friendlyarm,nanopi-neo4", "rockchip,rk3399"; - - vdd_5v: vdd-5v { - compatible = "regulator-fixed"; - regulator-name = "vdd_5v"; - regulator-always-on; - regulator-boot-on; - }; - - vcc5v0_core: vcc5v0-core { - compatible = "regulator-fixed"; - regulator-name = "vcc5v0_core"; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vdd_5v>; - }; - - vcc5v0_usb1: vcc5v0-usb1 { - compatible = "regulator-fixed"; - regulator-name = "vcc5v0_usb1"; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vcc5v0_sys>; - }; -}; - -&vcc3v3_sys { - vin-supply = <&vcc5v0_core>; -}; - -&u2phy0_host { - phy-supply = <&vcc5v0_usb1>; -}; - -&vbus_typec { - regulator-always-on; - vin-supply = <&vdd_5v>; -}; diff --git a/arch/arm/dts/rk3399-nanopi-r4s.dts b/arch/arm/dts/rk3399-nanopi-r4s.dts deleted file mode 100644 index fe5b52610010..000000000000 --- a/arch/arm/dts/rk3399-nanopi-r4s.dts +++ /dev/null @@ -1,133 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * FriendlyElec NanoPC-T4 board device tree source - * - * Copyright (c) 2020 FriendlyElec Computer Tech. Co., Ltd. - * (http://www.friendlyarm.com) - * - * Copyright (c) 2018 Collabora Ltd. - * - * Copyright (c) 2020 Jensen Huang - * Copyright (c) 2020 Marty Jones - * Copyright (c) 2021 Tianling Shen - */ - -/dts-v1/; -#include "rk3399-nanopi4.dtsi" - -/ { - model = "FriendlyElec NanoPi R4S"; - compatible = "friendlyarm,nanopi-r4s", "rockchip,rk3399"; - - /delete-node/ display-subsystem; - - gpio-leds { - pinctrl-0 = <&lan_led_pin>, <&sys_led_pin>, <&wan_led_pin>; - - /delete-node/ led-0; - - lan_led: led-lan { - gpios = <&gpio1 RK_PA1 GPIO_ACTIVE_HIGH>; - label = "green:lan"; - }; - - sys_led: led-sys { - gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>; - label = "red:power"; - default-state = "on"; - }; - - wan_led: led-wan { - gpios = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>; - label = "green:wan"; - }; - }; - - gpio-keys { - pinctrl-0 = <&reset_button_pin>; - - /delete-node/ key-power; - - key-reset { - debounce-interval = <50>; - gpios = <&gpio1 RK_PC6 GPIO_ACTIVE_LOW>; - label = "reset"; - linux,code = ; - }; - }; - - vdd_5v: vdd-5v { - compatible = "regulator-fixed"; - regulator-name = "vdd_5v"; - regulator-always-on; - regulator-boot-on; - }; -}; - -&emmc_phy { - status = "disabled"; -}; - -&i2c4 { - status = "disabled"; -}; - -&pcie0 { - max-link-speed = <1>; - num-lanes = <1>; - vpcie3v3-supply = <&vcc3v3_sys>; -}; - -&pinctrl { - gpio-leds { - /delete-node/ status-led-pin; - - lan_led_pin: lan-led-pin { - rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - sys_led_pin: sys-led-pin { - rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - wan_led_pin: wan-led-pin { - rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - rockchip-key { - /delete-node/ power-key; - - reset_button_pin: reset-button-pin { - rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; -}; - -&sdhci { - status = "disabled"; -}; - -&sdio0 { - status = "disabled"; -}; - -&u2phy0_host { - phy-supply = <&vdd_5v>; -}; - -&u2phy1_host { - status = "disabled"; -}; - -&uart0 { - status = "disabled"; -}; - -&usbdrd_dwc3_0 { - dr_mode = "host"; -}; - -&vcc3v3_sys { - vin-supply = <&vcc5v0_sys>; -}; diff --git a/arch/arm/dts/rk3399-nanopi4.dtsi b/arch/arm/dts/rk3399-nanopi4.dtsi deleted file mode 100644 index b7f1e47978a6..000000000000 --- a/arch/arm/dts/rk3399-nanopi4.dtsi +++ /dev/null @@ -1,762 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * RK3399-based FriendlyElec boards device tree source - * - * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd - * - * Copyright (c) 2018 FriendlyElec Computer Tech. Co., Ltd. - * (http://www.friendlyarm.com) - * - * Copyright (c) 2018 Collabora Ltd. - * Copyright (c) 2019 Arm Ltd. - */ - -/dts-v1/; -#include -#include "rk3399.dtsi" -#include "rk3399-opp.dtsi" - -/ { - aliases { - ethernet0 = &gmac; - mmc0 = &sdio0; - mmc1 = &sdmmc; - mmc2 = &sdhci; - }; - - chosen { - stdout-path = "serial2:1500000n8"; - }; - - clkin_gmac: external-gmac-clock { - compatible = "fixed-clock"; - clock-frequency = <125000000>; - clock-output-names = "clkin_gmac"; - #clock-cells = <0>; - }; - - vcc3v3_sys: vcc3v3-sys { - compatible = "regulator-fixed"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc3v3_sys"; - }; - - vcc5v0_sys: vcc5v0-sys { - compatible = "regulator-fixed"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-name = "vcc5v0_sys"; - vin-supply = <&vdd_5v>; - }; - - /* switched by pmic_sleep */ - vcc1v8_s3: vcc1v8-s3 { - compatible = "regulator-fixed"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "vcc1v8_s3"; - vin-supply = <&vcc_1v8>; - }; - - vcc3v0_sd: vcc3v0-sd { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc0_pwr_h>; - regulator-always-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "vcc3v0_sd"; - vin-supply = <&vcc3v3_sys>; - }; - - /* - * Really, this is supplied by vcc_1v8, and vcc1v8_s3 only - * drives the enable pin, but we can't quite model that. - */ - vcca0v9_s3: vcca0v9-s3 { - compatible = "regulator-fixed"; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <900000>; - regulator-name = "vcca0v9_s3"; - vin-supply = <&vcc1v8_s3>; - }; - - /* As above, actually supplied by vcc3v3_sys */ - vcca1v8_s3: vcca1v8-s3 { - compatible = "regulator-fixed"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "vcca1v8_s3"; - vin-supply = <&vcc1v8_s3>; - }; - - vbus_typec: vbus-typec { - compatible = "regulator-fixed"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-name = "vbus_typec"; - }; - - gpio-keys { - compatible = "gpio-keys"; - autorepeat; - pinctrl-names = "default"; - pinctrl-0 = <&power_key>; - - key-power { - debounce-interval = <100>; - gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; - label = "GPIO Key Power"; - linux,code = ; - wakeup-source; - }; - }; - - leds: gpio-leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&status_led_pin>; - - status_led: led-0 { - gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>; - label = "status_led"; - linux,default-trigger = "heartbeat"; - }; - }; - - sdio_pwrseq: sdio-pwrseq { - compatible = "mmc-pwrseq-simple"; - clocks = <&rk808 1>; - clock-names = "ext_clock"; - pinctrl-names = "default"; - pinctrl-0 = <&wifi_reg_on_h>; - reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; - }; -}; - -&cpu_b0 { - cpu-supply = <&vdd_cpu_b>; -}; - -&cpu_b1 { - cpu-supply = <&vdd_cpu_b>; -}; - -&cpu_l0 { - cpu-supply = <&vdd_cpu_l>; -}; - -&cpu_l1 { - cpu-supply = <&vdd_cpu_l>; -}; - -&cpu_l2 { - cpu-supply = <&vdd_cpu_l>; -}; - -&cpu_l3 { - cpu-supply = <&vdd_cpu_l>; -}; - -&emmc_phy { - rockchip,enable-strobe-pulldown; - status = "okay"; -}; - -&gmac { - assigned-clock-parents = <&clkin_gmac>; - assigned-clocks = <&cru SCLK_RMII_SRC>; - clock_in_out = "input"; - pinctrl-names = "default"; - pinctrl-0 = <&rgmii_pins>, <&phy_intb>, <&phy_rstb>; - phy-handle = <&rtl8211e>; - phy-mode = "rgmii"; - phy-supply = <&vcc3v3_s3>; - tx_delay = <0x28>; - rx_delay = <0x11>; - status = "okay"; - - mdio { - compatible = "snps,dwmac-mdio"; - #address-cells = <1>; - #size-cells = <0>; - - rtl8211e: ethernet-phy@1 { - reg = <1>; - interrupt-parent = <&gpio3>; - interrupts = ; - reset-assert-us = <10000>; - reset-deassert-us = <30000>; - reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&gpu { - mali-supply = <&vdd_gpu>; - status = "okay"; -}; - -&hdmi { - ddc-i2c-bus = <&i2c7>; - pinctrl-names = "default"; - pinctrl-0 = <&hdmi_cec>; - status = "okay"; -}; - -&hdmi_sound { - status = "okay"; -}; - -&i2c0 { - clock-frequency = <400000>; - i2c-scl-rising-time-ns = <160>; - i2c-scl-falling-time-ns = <30>; - status = "okay"; - - vdd_cpu_b: regulator@40 { - compatible = "silergy,syr827"; - reg = <0x40>; - fcs,suspend-voltage-selector = <1>; - pinctrl-names = "default"; - pinctrl-0 = <&cpu_b_sleep>; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <712500>; - regulator-max-microvolt = <1500000>; - regulator-name = "vdd_cpu_b"; - regulator-ramp-delay = <1000>; - vin-supply = <&vcc3v3_sys>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_gpu: regulator@41 { - compatible = "silergy,syr828"; - reg = <0x41>; - fcs,suspend-voltage-selector = <1>; - pinctrl-names = "default"; - pinctrl-0 = <&gpu_sleep>; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <712500>; - regulator-max-microvolt = <1500000>; - regulator-name = "vdd_gpu"; - regulator-ramp-delay = <1000>; - vin-supply = <&vcc3v3_sys>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - rk808: pmic@1b { - compatible = "rockchip,rk808"; - reg = <0x1b>; - clock-output-names = "xin32k", "rtc_clko_wifi"; - #clock-cells = <1>; - interrupt-parent = <&gpio1>; - interrupts = <21 IRQ_TYPE_LEVEL_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&pmic_int_l>, <&ap_pwroff>, <&clk_32k>; - rockchip,system-power-controller; - wakeup-source; - - vcc1-supply = <&vcc3v3_sys>; - vcc2-supply = <&vcc3v3_sys>; - vcc3-supply = <&vcc3v3_sys>; - vcc4-supply = <&vcc3v3_sys>; - vcc6-supply = <&vcc3v3_sys>; - vcc7-supply = <&vcc3v3_sys>; - vcc8-supply = <&vcc3v3_sys>; - vcc9-supply = <&vcc3v3_sys>; - vcc10-supply = <&vcc3v3_sys>; - vcc11-supply = <&vcc3v3_sys>; - vcc12-supply = <&vcc3v3_sys>; - vddio-supply = <&vcc_3v0>; - - regulators { - vdd_center: DCDC_REG1 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1350000>; - regulator-name = "vdd_center"; - regulator-ramp-delay = <6001>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_cpu_l: DCDC_REG2 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1350000>; - regulator-name = "vdd_cpu_l"; - regulator-ramp-delay = <6001>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_ddr: DCDC_REG3 { - regulator-always-on; - regulator-boot-on; - regulator-name = "vcc_ddr"; - - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - vcc_1v8: DCDC_REG4 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "vcc_1v8"; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vcc1v8_cam: LDO_REG1 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "vcc1v8_cam"; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc3v0_touch: LDO_REG2 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "vcc3v0_touch"; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc1v8_pmupll: LDO_REG3 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "vcc1v8_pmupll"; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vcc_sdio: LDO_REG4 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc_sdio"; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3000000>; - }; - }; - - vcca3v0_codec: LDO_REG5 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "vcca3v0_codec"; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_1v5: LDO_REG6 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - regulator-name = "vcc_1v5"; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1500000>; - }; - }; - - vcca1v8_codec: LDO_REG7 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "vcca1v8_codec"; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_3v0: LDO_REG8 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "vcc_3v0"; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3000000>; - }; - }; - - vcc3v3_s3: SWITCH_REG1 { - regulator-always-on; - regulator-boot-on; - regulator-name = "vcc3v3_s3"; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc3v3_s0: SWITCH_REG2 { - regulator-always-on; - regulator-boot-on; - regulator-name = "vcc3v3_s0"; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - }; - }; -}; - -&i2c1 { - clock-frequency = <200000>; - i2c-scl-rising-time-ns = <150>; - i2c-scl-falling-time-ns = <30>; - status = "okay"; -}; - -&i2c2 { - status = "okay"; -}; - -&i2c4 { - clock-frequency = <400000>; - i2c-scl-rising-time-ns = <160>; - i2c-scl-falling-time-ns = <30>; - status = "okay"; - - fusb0: typec-portc@22 { - compatible = "fcs,fusb302"; - reg = <0x22>; - interrupt-parent = <&gpio1>; - interrupts = ; - pinctrl-names = "default"; - pinctrl-0 = <&fusb0_int>; - vbus-supply = <&vbus_typec>; - }; -}; - -&i2c7 { - status = "okay"; -}; - -&i2s2 { - status = "okay"; -}; - -&io_domains { - bt656-supply = <&vcc_1v8>; - audio-supply = <&vcca1v8_codec>; - sdmmc-supply = <&vcc_sdio>; - gpio1830-supply = <&vcc_3v0>; - status = "okay"; -}; - -&pcie_phy { - assigned-clock-parents = <&cru SCLK_PCIEPHY_REF100M>; - assigned-clock-rates = <100000000>; - assigned-clocks = <&cru SCLK_PCIEPHY_REF>; - status = "okay"; -}; - -&pcie0 { - num-lanes = <2>; - vpcie0v9-supply = <&vcca0v9_s3>; - vpcie1v8-supply = <&vcca1v8_s3>; - status = "okay"; -}; - -&pinctrl { - fusb30x { - fusb0_int: fusb0-int { - rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - gpio-leds { - status_led_pin: status-led-pin { - rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - gmac { - phy_intb: phy-intb { - rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>; - }; - - phy_rstb: phy-rstb { - rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - pmic { - cpu_b_sleep: cpu-b-sleep { - rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; - }; - - gpu_sleep: gpu-sleep { - rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; - }; - - pmic_int_l: pmic-int-l { - rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - rockchip-key { - power_key: power-key { - rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - sdio { - bt_host_wake_l: bt-host-wake-l { - rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - bt_reg_on_h: bt-reg-on-h { - /* external pullup to VCC1V8_PMUPLL */ - rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - bt_wake_l: bt-wake-l { - rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - wifi_reg_on_h: wifi-reg_on-h { - rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - sdmmc { - sdmmc0_det_l: sdmmc0-det-l { - rockchip,pins = <0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>; - }; - - sdmmc0_pwr_h: sdmmc0-pwr-h { - rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; -}; - -&pmu_io_domains { - pmu1830-supply = <&vcc_3v0>; - status = "okay"; -}; - -&pwm0 { - status = "okay"; -}; - -&pwm1 { - status = "okay"; -}; - -&pwm2 { - pinctrl-names = "active"; - pinctrl-0 = <&pwm2_pin_pull_down>; - status = "okay"; -}; - -&saradc { - vref-supply = <&vcca1v8_s3>; - status = "okay"; -}; - -&sdhci { - bus-width = <8>; - mmc-hs200-1_8v; - non-removable; - status = "okay"; -}; - -&sdio0 { - bus-width = <4>; - cap-sd-highspeed; - cap-sdio-irq; - keep-power-in-suspend; - mmc-pwrseq = <&sdio_pwrseq>; - non-removable; - pinctrl-names = "default"; - pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>; - sd-uhs-sdr104; - status = "okay"; -}; - -&sdmmc { - bus-width = <4>; - cap-sd-highspeed; - cap-mmc-highspeed; - cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>; - disable-wp; - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc_bus4 &sdmmc_clk &sdmmc_cmd &sdmmc0_det_l>; - sd-uhs-sdr104; - vmmc-supply = <&vcc3v0_sd>; - vqmmc-supply = <&vcc_sdio>; - status = "okay"; -}; - -&tcphy0 { - status = "okay"; -}; - -&tcphy1 { - status = "okay"; -}; - -&tsadc { - /* tshut mode 0:CRU 1:GPIO */ - rockchip,hw-tshut-mode = <1>; - /* tshut polarity 0:LOW 1:HIGH */ - rockchip,hw-tshut-polarity = <1>; - status = "okay"; -}; - -&u2phy0 { - status = "okay"; -}; - -&u2phy0_host { - status = "okay"; -}; - -&u2phy0_otg { - status = "okay"; -}; - -&u2phy1 { - status = "okay"; -}; - -&u2phy1_host { - status = "okay"; -}; - -&u2phy1_otg { - status = "okay"; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_xfer &uart0_rts &uart0_cts>; - status = "okay"; - - bluetooth { - compatible = "brcm,bcm43438-bt"; - clocks = <&rk808 1>; - clock-names = "lpo"; - device-wakeup-gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>; - host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>; - shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>; - max-speed = <4000000>; - pinctrl-names = "default"; - pinctrl-0 = <&bt_reg_on_h &bt_host_wake_l &bt_wake_l>; - vbat-supply = <&vcc3v3_sys>; - vddio-supply = <&vcc_1v8>; - }; -}; - -&uart2 { - status = "okay"; -}; - -&usbdrd3_0 { - status = "okay"; -}; - -&usbdrd3_1 { - status = "okay"; -}; - -&usbdrd_dwc3_0 { - status = "okay"; -}; - -&usbdrd_dwc3_1 { - dr_mode = "host"; - status = "okay"; -}; - -&usb_host0_ehci { - status = "okay"; -}; - -&usb_host0_ohci { - status = "okay"; -}; - -&usb_host1_ehci { - status = "okay"; -}; - -&usb_host1_ohci { - status = "okay"; -}; - -&vopb { - status = "okay"; -}; - -&vopb_mmu { - status = "okay"; -}; - -&vopl { - status = "okay"; -}; - -&vopl_mmu { - status = "okay"; -}; diff --git a/arch/arm/dts/rk3399-op1-opp.dtsi b/arch/arm/dts/rk3399-op1-opp.dtsi deleted file mode 100644 index 783120e9cebe..000000000000 --- a/arch/arm/dts/rk3399-op1-opp.dtsi +++ /dev/null @@ -1,166 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2016-2017 Fuzhou Rockchip Electronics Co., Ltd - */ - -/ { - cluster0_opp: opp-table-0 { - compatible = "operating-points-v2"; - opp-shared; - - opp00 { - opp-hz = /bits/ 64 <408000000>; - opp-microvolt = <800000>; - clock-latency-ns = <40000>; - }; - opp01 { - opp-hz = /bits/ 64 <600000000>; - opp-microvolt = <825000>; - }; - opp02 { - opp-hz = /bits/ 64 <816000000>; - opp-microvolt = <850000>; - }; - opp03 { - opp-hz = /bits/ 64 <1008000000>; - opp-microvolt = <900000>; - }; - opp04 { - opp-hz = /bits/ 64 <1200000000>; - opp-microvolt = <975000>; - }; - opp05 { - opp-hz = /bits/ 64 <1416000000>; - opp-microvolt = <1100000>; - }; - opp06 { - opp-hz = /bits/ 64 <1512000000>; - opp-microvolt = <1150000>; - }; - }; - - cluster1_opp: opp-table-1 { - compatible = "operating-points-v2"; - opp-shared; - - opp00 { - opp-hz = /bits/ 64 <408000000>; - opp-microvolt = <800000>; - clock-latency-ns = <40000>; - }; - opp01 { - opp-hz = /bits/ 64 <600000000>; - opp-microvolt = <800000>; - }; - opp02 { - opp-hz = /bits/ 64 <816000000>; - opp-microvolt = <825000>; - }; - opp03 { - opp-hz = /bits/ 64 <1008000000>; - opp-microvolt = <850000>; - }; - opp04 { - opp-hz = /bits/ 64 <1200000000>; - opp-microvolt = <900000>; - }; - opp05 { - opp-hz = /bits/ 64 <1416000000>; - opp-microvolt = <975000>; - }; - opp06 { - opp-hz = /bits/ 64 <1608000000>; - opp-microvolt = <1050000>; - }; - opp07 { - opp-hz = /bits/ 64 <1800000000>; - opp-microvolt = <1150000>; - }; - opp08 { - opp-hz = /bits/ 64 <2016000000>; - opp-microvolt = <1250000>; - }; - }; - - gpu_opp_table: opp-table-2 { - compatible = "operating-points-v2"; - - opp00 { - opp-hz = /bits/ 64 <200000000>; - opp-microvolt = <800000>; - }; - opp01 { - opp-hz = /bits/ 64 <297000000>; - opp-microvolt = <800000>; - }; - opp02 { - opp-hz = /bits/ 64 <400000000>; - opp-microvolt = <825000>; - }; - opp03 { - opp-hz = /bits/ 64 <500000000>; - opp-microvolt = <850000>; - }; - opp04 { - opp-hz = /bits/ 64 <600000000>; - opp-microvolt = <925000>; - }; - opp05 { - opp-hz = /bits/ 64 <800000000>; - opp-microvolt = <1075000>; - }; - }; - - dmc_opp_table: opp-table-3 { - compatible = "operating-points-v2"; - - opp00 { - opp-hz = /bits/ 64 <400000000>; - opp-microvolt = <900000>; - }; - opp01 { - opp-hz = /bits/ 64 <666000000>; - opp-microvolt = <900000>; - }; - opp02 { - opp-hz = /bits/ 64 <800000000>; - opp-microvolt = <900000>; - }; - opp03 { - opp-hz = /bits/ 64 <928000000>; - opp-microvolt = <925000>; - }; - }; -}; - -&cpu_l0 { - operating-points-v2 = <&cluster0_opp>; -}; - -&cpu_l1 { - operating-points-v2 = <&cluster0_opp>; -}; - -&cpu_l2 { - operating-points-v2 = <&cluster0_opp>; -}; - -&cpu_l3 { - operating-points-v2 = <&cluster0_opp>; -}; - -&cpu_b0 { - operating-points-v2 = <&cluster1_opp>; -}; - -&cpu_b1 { - operating-points-v2 = <&cluster1_opp>; -}; - -&dmc { - operating-points-v2 = <&dmc_opp_table>; -}; - -&gpu { - operating-points-v2 = <&gpu_opp_table>; -}; diff --git a/arch/arm/dts/rk3399-opp.dtsi b/arch/arm/dts/rk3399-opp.dtsi deleted file mode 100644 index fee5e7111279..000000000000 --- a/arch/arm/dts/rk3399-opp.dtsi +++ /dev/null @@ -1,133 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2016-2017 Fuzhou Rockchip Electronics Co., Ltd - */ - -/ { - cluster0_opp: opp-table-0 { - compatible = "operating-points-v2"; - opp-shared; - - opp00 { - opp-hz = /bits/ 64 <408000000>; - opp-microvolt = <825000 825000 1250000>; - clock-latency-ns = <40000>; - }; - opp01 { - opp-hz = /bits/ 64 <600000000>; - opp-microvolt = <825000 825000 1250000>; - }; - opp02 { - opp-hz = /bits/ 64 <816000000>; - opp-microvolt = <850000 850000 1250000>; - }; - opp03 { - opp-hz = /bits/ 64 <1008000000>; - opp-microvolt = <925000 925000 1250000>; - }; - opp04 { - opp-hz = /bits/ 64 <1200000000>; - opp-microvolt = <1000000 1000000 1250000>; - }; - opp05 { - opp-hz = /bits/ 64 <1416000000>; - opp-microvolt = <1125000 1125000 1250000>; - }; - }; - - cluster1_opp: opp-table-1 { - compatible = "operating-points-v2"; - opp-shared; - - opp00 { - opp-hz = /bits/ 64 <408000000>; - opp-microvolt = <825000 825000 1250000>; - clock-latency-ns = <40000>; - }; - opp01 { - opp-hz = /bits/ 64 <600000000>; - opp-microvolt = <825000 825000 1250000>; - }; - opp02 { - opp-hz = /bits/ 64 <816000000>; - opp-microvolt = <825000 825000 1250000>; - }; - opp03 { - opp-hz = /bits/ 64 <1008000000>; - opp-microvolt = <875000 875000 1250000>; - }; - opp04 { - opp-hz = /bits/ 64 <1200000000>; - opp-microvolt = <950000 950000 1250000>; - }; - opp05 { - opp-hz = /bits/ 64 <1416000000>; - opp-microvolt = <1025000 1025000 1250000>; - }; - opp06 { - opp-hz = /bits/ 64 <1608000000>; - opp-microvolt = <1100000 1100000 1250000>; - }; - opp07 { - opp-hz = /bits/ 64 <1800000000>; - opp-microvolt = <1200000 1200000 1250000>; - }; - }; - - gpu_opp_table: opp-table-2 { - compatible = "operating-points-v2"; - - opp00 { - opp-hz = /bits/ 64 <200000000>; - opp-microvolt = <825000 825000 1150000>; - }; - opp01 { - opp-hz = /bits/ 64 <297000000>; - opp-microvolt = <825000 825000 1150000>; - }; - opp02 { - opp-hz = /bits/ 64 <400000000>; - opp-microvolt = <825000 825000 1150000>; - }; - opp03 { - opp-hz = /bits/ 64 <500000000>; - opp-microvolt = <875000 875000 1150000>; - }; - opp04 { - opp-hz = /bits/ 64 <600000000>; - opp-microvolt = <925000 925000 1150000>; - }; - opp05 { - opp-hz = /bits/ 64 <800000000>; - opp-microvolt = <1100000 1100000 1150000>; - }; - }; -}; - -&cpu_l0 { - operating-points-v2 = <&cluster0_opp>; -}; - -&cpu_l1 { - operating-points-v2 = <&cluster0_opp>; -}; - -&cpu_l2 { - operating-points-v2 = <&cluster0_opp>; -}; - -&cpu_l3 { - operating-points-v2 = <&cluster0_opp>; -}; - -&cpu_b0 { - operating-points-v2 = <&cluster1_opp>; -}; - -&cpu_b1 { - operating-points-v2 = <&cluster1_opp>; -}; - -&gpu { - operating-points-v2 = <&gpu_opp_table>; -}; diff --git a/arch/arm/dts/rk3399-orangepi.dts b/arch/arm/dts/rk3399-orangepi.dts deleted file mode 100644 index e7551449e718..000000000000 --- a/arch/arm/dts/rk3399-orangepi.dts +++ /dev/null @@ -1,896 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd. - */ - -/dts-v1/; - -#include "dt-bindings/pwm/pwm.h" -#include "dt-bindings/input/input.h" -#include -#include "dt-bindings/usb/pd.h" -#include "rk3399.dtsi" -#include "rk3399-opp.dtsi" - -/ { - model = "Orange Pi RK3399 Board"; - compatible = "rockchip,rk3399-orangepi", "rockchip,rk3399"; - - aliases { - ethernet0 = &gmac; - mmc0 = &sdio0; - mmc1 = &sdmmc; - mmc2 = &sdhci; - }; - - chosen { - stdout-path = "serial2:1500000n8"; - }; - - clkin_gmac: external-gmac-clock { - compatible = "fixed-clock"; - clock-frequency = <125000000>; - clock-output-names = "clkin_gmac"; - #clock-cells = <0>; - }; - - adc-keys { - compatible = "adc-keys"; - io-channels = <&saradc 1>; - io-channel-names = "buttons"; - keyup-threshold-microvolt = <1800000>; - poll-interval = <100>; - - button-up { - label = "Volume Up"; - linux,code = ; - press-threshold-microvolt = <100000>; - }; - - button-down { - label = "Volume Down"; - linux,code = ; - press-threshold-microvolt = <300000>; - }; - - button-back { - label = "Back"; - linux,code = ; - press-threshold-microvolt = <985000>; - }; - - button-menu { - label = "Menu"; - linux,code = ; - press-threshold-microvolt = <1314000>; - }; - }; - - dc_12v: dc-12v { - compatible = "regulator-fixed"; - regulator-name = "dc_12v"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - }; - - keys: gpio-keys { - compatible = "gpio-keys"; - autorepeat; - - key-power { - debounce-interval = <100>; - gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; - label = "GPIO Power"; - linux,code = ; - linux,input-type = <1>; - pinctrl-names = "default"; - pinctrl-0 = <&pwr_btn>; - wakeup-source; - }; - }; - - sdio_pwrseq: sdio-pwrseq { - compatible = "mmc-pwrseq-simple"; - clocks = <&rk808 1>; - clock-names = "ext_clock"; - pinctrl-names = "default"; - pinctrl-0 = <&wifi_reg_on_h>; - reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; - }; - - /* switched by pmic_sleep */ - vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 { - compatible = "regulator-fixed"; - regulator-name = "vcc1v8_s3"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vcc_1v8>; - }; - - vcc3v0_sd: vcc3v0-sd { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc0_pwr_h>; - regulator-boot-on; - regulator-max-microvolt = <3000000>; - regulator-min-microvolt = <3000000>; - regulator-name = "vcc3v0_sd"; - vin-supply = <&vcc3v3_sys>; - }; - - vcc3v3_sys: vcc3v3-sys { - compatible = "regulator-fixed"; - regulator-name = "vcc3v3_sys"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vcc_sys>; - }; - - vcc5v0_host: vcc5v0-host-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&vcc5v0_host_en>; - regulator-name = "vcc5v0_host"; - regulator-always-on; - vin-supply = <&vcc_sys>; - }; - - vbus_typec: vbus-typec-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&vcc5v0_typec_en>; - regulator-name = "vbus_typec"; - vin-supply = <&vcc_sys>; - }; - - vcc_sys: vcc-sys { - compatible = "regulator-fixed"; - regulator-name = "vcc_sys"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&dc_12v>; - }; - - vdd_log: vdd-log { - compatible = "pwm-regulator"; - pwms = <&pwm2 0 25000 1>; - pwm-supply = <&vcc_sys>; - regulator-name = "vdd_log"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1400000>; - }; -}; - -&cpu_l0 { - cpu-supply = <&vdd_cpu_l>; -}; - -&cpu_l1 { - cpu-supply = <&vdd_cpu_l>; -}; - -&cpu_l2 { - cpu-supply = <&vdd_cpu_l>; -}; - -&cpu_l3 { - cpu-supply = <&vdd_cpu_l>; -}; - -&cpu_b0 { - cpu-supply = <&vdd_cpu_b>; -}; - -&cpu_b1 { - cpu-supply = <&vdd_cpu_b>; -}; - -&emmc_phy { - status = "okay"; -}; - -&gmac { - assigned-clocks = <&cru SCLK_RMII_SRC>; - assigned-clock-parents = <&clkin_gmac>; - clock_in_out = "input"; - phy-supply = <&vcc3v3_s3>; - phy-mode = "rgmii"; - phy-handle = <&rtl8211e>; - pinctrl-names = "default"; - pinctrl-0 = <&rgmii_pins>, <&phy_intb>, <&phy_rstb>; - tx_delay = <0x28>; - rx_delay = <0x11>; - status = "okay"; - - mdio { - compatible = "snps,dwmac-mdio"; - #address-cells = <1>; - #size-cells = <0>; - - rtl8211e: ethernet-phy@1 { - reg = <1>; - interrupt-parent = <&gpio3>; - interrupts = ; - reset-assert-us = <10000>; - reset-deassert-us = <30000>; - reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&gpu { - mali-supply = <&vdd_gpu>; - status = "okay"; -}; - -&hdmi { - ddc-i2c-bus = <&i2c3>; - status = "okay"; -}; - -&hdmi_sound { - status = "okay"; -}; - -&i2c0 { - clock-frequency = <400000>; - i2c-scl-rising-time-ns = <168>; - i2c-scl-falling-time-ns = <4>; - status = "okay"; - - rk808: pmic@1b { - compatible = "rockchip,rk808"; - reg = <0x1b>; - interrupt-parent = <&gpio1>; - interrupts = <21 IRQ_TYPE_LEVEL_LOW>; - #clock-cells = <1>; - clock-output-names = "rtc_clko_soc", "rtc_clko_wifi"; - pinctrl-names = "default"; - pinctrl-0 = <&pmic_int_l>; - rockchip,system-power-controller; - wakeup-source; - - vcc1-supply = <&vcc3v3_sys>; - vcc2-supply = <&vcc3v3_sys>; - vcc3-supply = <&vcc3v3_sys>; - vcc4-supply = <&vcc3v3_sys>; - vcc6-supply = <&vcc3v3_sys>; - vcc7-supply = <&vcc3v3_sys>; - vcc8-supply = <&vcc3v3_sys>; - vcc9-supply = <&vcc3v3_sys>; - vcc10-supply = <&vcc3v3_sys>; - vcc11-supply = <&vcc3v3_sys>; - vcc12-supply = <&vcc3v3_sys>; - vddio-supply = <&vcc_3v0>; - - regulators { - vdd_center: DCDC_REG1 { - regulator-name = "vdd_center"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <700000>; - regulator-max-microvolt = <1500000>; - regulator-ramp-delay = <6001>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_cpu_l: DCDC_REG2 { - regulator-name = "vdd_cpu_l"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <700000>; - regulator-max-microvolt = <1500000>; - regulator-ramp-delay = <6001>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_ddr: DCDC_REG3 { - regulator-name = "vcc_ddr"; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - vcc_1v8: DCDC_REG4 { - regulator-name = "vcc_1v8"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vcc1v8_dvp: LDO_REG1 { - regulator-name = "vcc1v8_dvp"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3400000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc3v0_tp: LDO_REG2 { - regulator-name = "vcc3v0_tp"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3400000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc1v8_pmupll: LDO_REG3 { - regulator-name = "vcc1v8_pmupll"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <2500000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vcc_sdio: LDO_REG4 { - regulator-name = "vcc_sdio"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3400000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3000000>; - }; - }; - - vcca3v0_codec: LDO_REG5 { - regulator-name = "vcca3v0_codec"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3400000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_1v5: LDO_REG6 { - regulator-name = "vcc_1v5"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <2500000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1500000>; - }; - }; - - vcca1v8_codec: LDO_REG7 { - regulator-name = "vcca1v8_codec"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <2500000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_3v0: LDO_REG8 { - regulator-name = "vcc_3v0"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3400000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3000000>; - }; - }; - - vcc3v3_s3: SWITCH_REG1 { - regulator-name = "vcc3v3_s3"; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc3v3_s0: SWITCH_REG2 { - regulator-name = "vcc3v3_s0"; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - }; - }; - - vdd_cpu_b: regulator@40 { - compatible = "silergy,syr827"; - reg = <0x40>; - fcs,suspend-voltage-selector = <1>; - pinctrl-names = "default"; - pinctrl-0 = <&cpu_b_sleep>; - regulator-name = "vdd_cpu_b"; - regulator-min-microvolt = <712500>; - regulator-max-microvolt = <1500000>; - regulator-ramp-delay = <1000>; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vcc3v3_sys>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_gpu: regulator@41 { - compatible = "silergy,syr828"; - reg = <0x41>; - fcs,suspend-voltage-selector = <1>; - pinctrl-names = "default"; - pinctrl-0 = <&gpu_sleep>; - regulator-name = "vdd_gpu"; - regulator-min-microvolt = <712500>; - regulator-max-microvolt = <1500000>; - regulator-ramp-delay = <1000>; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vcc3v3_sys>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; -}; - -&i2c1 { - i2c-scl-rising-time-ns = <450>; - i2c-scl-falling-time-ns = <15>; - status = "okay"; -}; - -&i2c3 { - i2c-scl-rising-time-ns = <450>; - i2c-scl-falling-time-ns = <15>; - status = "okay"; -}; - -&i2c4 { - clock-frequency = <400000>; - i2c-scl-rising-time-ns = <450>; - i2c-scl-falling-time-ns = <15>; - status = "okay"; - - ak09911@c { - compatible = "asahi-kasei,ak09911"; - reg = <0x0c>; - vdd-supply = <&vcc3v3_s3>; - vid-supply = <&vcc3v3_s3>; - }; - - mpu6500@68 { - compatible = "invensense,mpu6500"; - reg = <0x68>; - interrupt-parent = <&gpio1>; - interrupts = ; - pinctrl-names = "default"; - pinctrl-0 = <&gsensor_int_l>; - vddio-supply = <&vcc3v3_s3>; - }; - - lsm6ds3@6a { - compatible = "st,lsm6ds3"; - reg = <0x6a>; - interrupt-parent = <&gpio1>; - interrupts = ; - pinctrl-names = "default"; - pinctrl-0 = <&gyr_int_l>; - vdd-supply = <&vcc3v3_s3>; - vddio-supply = <&vcc3v3_s3>; - }; - - cm32181@10 { - compatible = "capella,cm32181"; - reg = <0x10>; - interrupt-parent = <&gpio4>; - interrupts = ; - pinctrl-names = "default"; - pinctrl-0 = <&light_int_l>; - vdd-supply = <&vcc3v3_s3>; - }; - - fusb302@22 { - compatible = "fcs,fusb302"; - reg = <0x22>; - interrupt-parent = <&gpio1>; - interrupts = ; - pinctrl-names = "default"; - pinctrl-0 = <&chg_cc_int_l>; - vbus-supply = <&vbus_typec>; - - typec_con: connector { - compatible = "usb-c-connector"; - data-role = "host"; - label = "USB-C"; - op-sink-microwatt = <1000000>; - power-role = "dual"; - sink-pdos = - ; - source-pdos = - ; - try-power-role = "sink"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - typec_hs: endpoint { - remote-endpoint = <&u2phy0_typec_hs>; - }; - }; - port@1 { - reg = <1>; - typec_ss: endpoint { - remote-endpoint = <&tcphy0_typec_ss>; - }; - }; - port@2 { - reg = <2>; - typec_dp: endpoint { - remote-endpoint = <&tcphy0_typec_dp>; - }; - }; - }; - }; - }; -}; - -&io_domains { - status = "okay"; - bt656-supply = <&vcc_3v0>; - audio-supply = <&vcca1v8_codec>; - sdmmc-supply = <&vcc_sdio>; - gpio1830-supply = <&vcc_3v0>; -}; - -&pmu_io_domains { - status = "okay"; - pmu1830-supply = <&vcc_3v0>; -}; - -&pinctrl { - buttons { - pwr_btn: pwr-btn { - rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - gmac { - phy_intb: phy-intb { - rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>; - }; - - phy_rstb: phy-rstb { - rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - pmic { - cpu_b_sleep: cpu-b-sleep { - rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; - }; - - gpu_sleep: gpu-sleep { - rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; - }; - - pmic_int_l: pmic-int-l { - rockchip,pins = - <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - sd { - sdmmc0_pwr_h: sdmmc0-pwr-h { - rockchip,pins = - <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - usb2 { - vcc5v0_host_en: vcc5v0-host-en { - rockchip,pins = - <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - vcc5v0_typec_en: vcc5v0-typec-en { - rockchip,pins = - <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - sdio-pwrseq { - wifi_reg_on_h: wifi-reg-on-h { - rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - wifi { - wifi_host_wake_l: wifi-host-wake-l { - rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - bluetooth { - bt_reg_on_h: bt-enable-h { - rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - bt_host_wake_l: bt-host-wake-l { - rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - bt_wake_l: bt-wake-l { - rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - mpu6500 { - gsensor_int_l: gsensor-int-l { - rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - lsm6ds3 { - gyr_int_l: gyr-int-l { - rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - cm32181 { - light_int_l: light-int-l { - rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - fusb302 { - chg_cc_int_l: chg-cc-int-l { - rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; -}; - -&pwm0 { - status = "okay"; -}; - -&pwm2 { - status = "okay"; -}; - -&saradc { - vref-supply = <&vcca1v8_s3>; - status = "okay"; -}; - -&sdhci { - bus-width = <8>; - mmc-hs400-1_8v; - mmc-hs400-enhanced-strobe; - non-removable; - status = "okay"; -}; - -&sdio0 { - bus-width = <4>; - cap-sd-highspeed; - cap-sdio-irq; - clock-frequency = <50000000>; - disable-wp; - keep-power-in-suspend; - max-frequency = <50000000>; - mmc-pwrseq = <&sdio_pwrseq>; - non-removable; - pinctrl-names = "default"; - pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>; - sd-uhs-sdr104; - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - brcmf: wifi@1 { - reg = <1>; - compatible = "brcm,bcm4329-fmac"; - interrupt-parent = <&gpio0>; - interrupts = ; - interrupt-names = "host-wake"; - pinctrl-names = "default"; - pinctrl-0 = <&wifi_host_wake_l>; - }; -}; - -&sdmmc { - bus-width = <4>; - cap-mmc-highspeed; - cap-sd-highspeed; - cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>; - clock-frequency = <150000000>; - disable-wp; - max-frequency = <150000000>; - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; - vmmc-supply = <&vcc3v0_sd>; - vqmmc-supply = <&vcc_sdio>; - status = "okay"; -}; - -&tcphy0 { - status = "okay"; -}; - -&tcphy0_dp { - port { - tcphy0_typec_dp: endpoint { - remote-endpoint = <&typec_dp>; - }; - }; -}; - -&tcphy0_usb3 { - port { - tcphy0_typec_ss: endpoint { - remote-endpoint = <&typec_ss>; - }; - }; -}; - -&tcphy1 { - status = "okay"; -}; - -&tsadc { - rockchip,hw-tshut-mode = <1>; - rockchip,hw-tshut-polarity = <1>; - status = "okay"; -}; - -&u2phy0 { - status = "okay"; - - u2phy0_otg: otg-port { - phy-supply = <&vbus_typec>; - status = "okay"; - }; - - u2phy0_host: host-port { - phy-supply = <&vcc5v0_host>; - status = "okay"; - }; - - port { - u2phy0_typec_hs: endpoint { - remote-endpoint = <&typec_hs>; - }; - }; -}; - -&u2phy1 { - status = "okay"; - - u2phy1_otg: otg-port { - status = "okay"; - }; - - u2phy1_host: host-port { - phy-supply = <&vcc5v0_host>; - status = "okay"; - }; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; - status = "okay"; - - bluetooth { - compatible = "brcm,bcm43438-bt"; - clocks = <&rk808 1>; - clock-names = "lpo"; - device-wakeup-gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>; - host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>; - shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_reg_on_h>; - vbat-supply = <&vcc3v3_sys>; - vddio-supply = <&vcc_1v8>; - }; -}; - -&uart2 { - status = "okay"; -}; - -&usb_host0_ehci { - status = "okay"; -}; - -&usb_host0_ohci { - status = "okay"; -}; - -&usb_host1_ehci { - status = "okay"; -}; - -&usb_host1_ohci { - status = "okay"; -}; - -&usbdrd3_0 { - status = "okay"; -}; - -&usbdrd_dwc3_0 { - status = "okay"; - dr_mode = "host"; -}; - -&usbdrd3_1 { - status = "okay"; -}; - -&usbdrd_dwc3_1 { - status = "okay"; - dr_mode = "host"; -}; - -&vopb { - status = "okay"; -}; - -&vopb_mmu { - status = "okay"; -}; - -&vopl { - status = "okay"; -}; - -&vopl_mmu { - status = "okay"; -}; diff --git a/arch/arm/dts/rk3399-pinebook-pro.dts b/arch/arm/dts/rk3399-pinebook-pro.dts deleted file mode 100644 index 054c6a4d1a45..000000000000 --- a/arch/arm/dts/rk3399-pinebook-pro.dts +++ /dev/null @@ -1,1111 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd. - * Copyright (c) 2018 Akash Gajjar - * Copyright (c) 2020 Tobias Schramm - */ - -/dts-v1/; -#include -#include -#include -#include -#include -#include "rk3399.dtsi" -#include "rk3399-opp.dtsi" - -/ { - model = "Pine64 Pinebook Pro"; - compatible = "pine64,pinebook-pro", "rockchip,rk3399"; - chassis-type = "laptop"; - - aliases { - mmc0 = &sdio0; - mmc1 = &sdmmc; - mmc2 = &sdhci; - }; - - chosen { - stdout-path = "serial2:1500000n8"; - }; - - backlight: edp-backlight { - compatible = "pwm-backlight"; - power-supply = <&vcc_12v>; - pwms = <&pwm0 0 740740 0>; - }; - - bat: battery { - compatible = "simple-battery"; - charge-full-design-microamp-hours = <9800000>; - voltage-max-design-microvolt = <4350000>; - voltage-min-design-microvolt = <3000000>; - }; - - edp_panel: edp-panel { - compatible = "boe,nv140fhmn49"; - backlight = <&backlight>; - enable-gpios = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&panel_en_pin>; - power-supply = <&vcc3v3_panel>; - - port { - panel_in_edp: endpoint { - remote-endpoint = <&edp_out_panel>; - }; - }; - }; - - /* - * Use separate nodes for gpio-keys to allow for selective deactivation - * of wakeup sources via sysfs without disabling the whole key - */ - gpio-key-lid { - compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = <&lidbtn_pin>; - - switch-lid { - debounce-interval = <20>; - gpios = <&gpio1 RK_PA1 GPIO_ACTIVE_LOW>; - label = "Lid"; - linux,code = ; - linux,input-type = ; - wakeup-event-action = ; - wakeup-source; - }; - }; - - gpio-key-power { - compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = <&pwrbtn_pin>; - - key-power { - debounce-interval = <20>; - gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; - label = "Power"; - linux,code = ; - wakeup-source; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&pwr_led_pin &slp_led_pin>; - - green_led: led-0 { - color = ; - default-state = "on"; - function = LED_FUNCTION_POWER; - gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>; - label = "green:power"; - }; - - red_led: led-1 { - color = ; - default-state = "off"; - function = LED_FUNCTION_STANDBY; - gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>; - label = "red:standby"; - panic-indicator; - retain-state-suspended; - }; - }; - - /* Power sequence for SDIO WiFi module */ - sdio_pwrseq: sdio-pwrseq { - compatible = "mmc-pwrseq-simple"; - clocks = <&rk808 1>; - clock-names = "ext_clock"; - pinctrl-names = "default"; - pinctrl-0 = <&wifi_enable_h_pin>; - post-power-on-delay-ms = <100>; - power-off-delay-us = <500000>; - - /* WL_REG_ON on module */ - reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; - }; - - /* Audio components */ - es8316-sound { - compatible = "simple-audio-card"; - pinctrl-names = "default"; - pinctrl-0 = <&hp_det_pin>; - simple-audio-card,name = "rockchip,es8316-codec"; - simple-audio-card,format = "i2s"; - simple-audio-card,mclk-fs = <256>; - - simple-audio-card,widgets = - "Microphone", "Mic Jack", - "Headphone", "Headphones", - "Speaker", "Speaker"; - simple-audio-card,routing = - "MIC1", "Mic Jack", - "Headphones", "HPOL", - "Headphones", "HPOR", - "Speaker Amplifier INL", "HPOL", - "Speaker Amplifier INR", "HPOR", - "Speaker", "Speaker Amplifier OUTL", - "Speaker", "Speaker Amplifier OUTR"; - - simple-audio-card,hp-det-gpio = <&gpio0 RK_PB0 GPIO_ACTIVE_HIGH>; - simple-audio-card,aux-devs = <&speaker_amp>; - simple-audio-card,pin-switches = "Speaker"; - - simple-audio-card,cpu { - sound-dai = <&i2s1>; - }; - - simple-audio-card,codec { - sound-dai = <&es8316>; - }; - }; - - speaker_amp: speaker-amplifier { - compatible = "simple-audio-amplifier"; - enable-gpios = <&gpio4 RK_PD3 GPIO_ACTIVE_HIGH>; - sound-name-prefix = "Speaker Amplifier"; - VCC-supply = <&pa_5v>; - }; - - /* Power tree */ - /* Root power source */ - vcc_sysin: vcc-sysin { - compatible = "regulator-fixed"; - regulator-name = "vcc_sysin"; - regulator-always-on; - regulator-boot-on; - }; - - /* Regulators supplied by vcc_sysin */ - /* LCD backlight supply */ - vcc_12v: vcc-12v { - compatible = "regulator-fixed"; - regulator-name = "vcc_12v"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - vin-supply = <&vcc_sysin>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - /* Main 3.3 V supply */ - vcc3v3_sys: wifi_bat: vcc3v3-sys { - compatible = "regulator-fixed"; - regulator-name = "vcc3v3_sys"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vcc_sysin>; - - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - /* 5 V USB power supply */ - vcc5v0_usb: pa_5v: vcc5v0-usb-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&pwr_5v_pin>; - regulator-name = "vcc5v0_usb"; - regulator-always-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vcc_sysin>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - /* RK3399 logic supply */ - vdd_log: vdd-log { - compatible = "pwm-regulator"; - pwms = <&pwm2 0 25000 1>; - pwm-supply = <&vcc_sysin>; - regulator-name = "vdd_log"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1400000>; - - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - /* Regulators supplied by vcc3v3_sys */ - /* 0.9 V supply, always on */ - vcc_0v9: vcc-0v9 { - compatible = "regulator-fixed"; - regulator-name = "vcc_0v9"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <900000>; - vin-supply = <&vcc3v3_sys>; - }; - - /* S3 1.8 V supply, switched by vcc1v8_s3 */ - vcca1v8_s3: vcc1v8-s3 { - compatible = "regulator-fixed"; - regulator-name = "vcca1v8_s3"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vcc3v3_sys>; - }; - - /* micro SD card power */ - vcc3v0_sd: vcc3v0-sd { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc0_pwr_h_pin>; - regulator-name = "vcc3v0_sd"; - regulator-always-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - vin-supply = <&vcc3v3_sys>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - /* LCD panel power, called VCC3V3_S0 in schematic */ - vcc3v3_panel: vcc3v3-panel { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio1 RK_PC6 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&lcdvcc_en_pin>; - regulator-name = "vcc3v3_panel"; - regulator-always-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-enable-ramp-delay = <100000>; - vin-supply = <&vcc3v3_sys>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - /* M.2 adapter power, switched by vcc1v8_s3 */ - vcc3v3_ssd: vcc3v3-ssd { - compatible = "regulator-fixed"; - regulator-name = "vcc3v3_ssd"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vcc3v3_sys>; - }; - - /* Regulators supplied by vcc5v0_usb */ - /* USB 3 port power supply regulator */ - vcc5v0_otg: vcc5v0-otg { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&vcc5v0_host_en_pin>; - regulator-name = "vcc5v0_otg"; - regulator-always-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vcc5v0_usb>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - /* Regulators supplied by vcc5v0_usb */ - /* Type C port power supply regulator */ - vbus_5vout: vbus_typec: vbus-5vout { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&vcc5v0_typec0_en_pin>; - regulator-name = "vbus_5vout"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vcc5v0_usb>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - /* Regulators supplied by vcc_1v8 */ - /* Primary 0.9 V LDO */ - vcca0v9_s3: vcca0v9-s3 { - compatible = "regulator-fixed"; - regulator-name = "vcc0v9_s3"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vcc_1v8>; - - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - mains_charger: dc-charger { - compatible = "gpio-charger"; - charger-type = "mains"; - gpios = <&gpio4 RK_PD0 GPIO_ACTIVE_LOW>; - - /* Also triggered by USB charger */ - pinctrl-names = "default"; - pinctrl-0 = <&dc_det_pin>; - }; -}; - -&cpu_b0 { - cpu-supply = <&vdd_cpu_b>; -}; - -&cpu_b1 { - cpu-supply = <&vdd_cpu_b>; -}; - -&cpu_l0 { - cpu-supply = <&vdd_cpu_l>; -}; - -&cpu_l1 { - cpu-supply = <&vdd_cpu_l>; -}; - -&cpu_l2 { - cpu-supply = <&vdd_cpu_l>; -}; - -&cpu_l3 { - cpu-supply = <&vdd_cpu_l>; -}; - -&edp { - force-hpd; - pinctrl-names = "default"; - pinctrl-0 = <&edp_hpd>; - status = "okay"; - - ports { - edp_out: port@1 { - reg = <1>; - #address-cells = <1>; - #size-cells = <0>; - - edp_out_panel: endpoint@0 { - reg = <0>; - remote-endpoint = <&panel_in_edp>; - }; - }; - }; -}; - -&emmc_phy { - status = "okay"; -}; - -&gpu { - mali-supply = <&vdd_gpu>; - status = "okay"; -}; - -&hdmi_sound { - status = "okay"; -}; - -&i2c0 { - clock-frequency = <400000>; - i2c-scl-falling-time-ns = <4>; - i2c-scl-rising-time-ns = <168>; - status = "okay"; - - rk808: pmic@1b { - compatible = "rockchip,rk808"; - reg = <0x1b>; - #clock-cells = <1>; - clock-output-names = "xin32k", "rk808-clkout2"; - interrupt-parent = <&gpio3>; - interrupts = <10 IRQ_TYPE_LEVEL_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&pmic_int_l_pin>; - rockchip,system-power-controller; - wakeup-source; - - vcc1-supply = <&vcc_sysin>; - vcc2-supply = <&vcc_sysin>; - vcc3-supply = <&vcc_sysin>; - vcc4-supply = <&vcc_sysin>; - vcc6-supply = <&vcc_sysin>; - vcc7-supply = <&vcc_sysin>; - vcc8-supply = <&vcc3v3_sys>; - vcc9-supply = <&vcc_sysin>; - vcc10-supply = <&vcc_sysin>; - vcc11-supply = <&vcc_sysin>; - vcc12-supply = <&vcc3v3_sys>; - - regulators { - /* rk3399 center logic supply */ - vdd_center: DCDC_REG1 { - regulator-name = "vdd_center"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1350000>; - regulator-ramp-delay = <6001>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_cpu_l: DCDC_REG2 { - regulator-name = "vdd_cpu_l"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1350000>; - regulator-ramp-delay = <6001>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_ddr: DCDC_REG3 { - regulator-name = "vcc_ddr"; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - vcc_1v8: vcc_wl: DCDC_REG4 { - regulator-name = "vcc_1v8"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - /* not used */ - LDO_REG1 { - }; - - /* not used */ - LDO_REG2 { - }; - - vcc1v8_pmupll: LDO_REG3 { - regulator-name = "vcc1v8_pmupll"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vcc_sdio: LDO_REG4 { - regulator-name = "vcc_sdio"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3000000>; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3000000>; - }; - }; - - vcca3v0_codec: LDO_REG5 { - regulator-name = "vcca3v0_codec"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_1v5: LDO_REG6 { - regulator-name = "vcc_1v5"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1500000>; - }; - }; - - vcca1v8_codec: LDO_REG7 { - regulator-name = "vcca1v8_codec"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_3v0: LDO_REG8 { - regulator-name = "vcc_3v0"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3000000>; - }; - }; - - vcc3v3_s3: SWITCH_REG1 { - regulator-name = "vcc3v3_s3"; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc3v3_s0: SWITCH_REG2 { - regulator-name = "vcc3v3_s0"; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - }; - }; - - vdd_cpu_b: regulator@40 { - compatible = "silergy,syr827"; - reg = <0x40>; - fcs,suspend-voltage-selector = <1>; - pinctrl-names = "default"; - pinctrl-0 = <&vsel1_pin>; - regulator-name = "vdd_cpu_b"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <712500>; - regulator-max-microvolt = <1500000>; - regulator-ramp-delay = <1000>; - vin-supply = <&vcc_1v8>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_gpu: regulator@41 { - compatible = "silergy,syr828"; - reg = <0x41>; - fcs,suspend-voltage-selector = <1>; - pinctrl-names = "default"; - pinctrl-0 = <&vsel2_pin>; - regulator-name = "vdd_gpu"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <712500>; - regulator-max-microvolt = <1500000>; - regulator-ramp-delay = <1000>; - vin-supply = <&vcc_1v8>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; -}; - -&i2c1 { - clock-frequency = <100000>; - i2c-scl-falling-time-ns = <4>; - i2c-scl-rising-time-ns = <168>; - status = "okay"; - - es8316: audio-codec@11 { - compatible = "everest,es8316"; - reg = <0x11>; - clocks = <&cru SCLK_I2S_8CH_OUT>; - clock-names = "mclk"; - #sound-dai-cells = <0>; - }; -}; - -&i2c3 { - i2c-scl-falling-time-ns = <15>; - i2c-scl-rising-time-ns = <450>; - status = "okay"; -}; - -&i2c4 { - i2c-scl-falling-time-ns = <20>; - i2c-scl-rising-time-ns = <600>; - status = "okay"; - - fusb0: fusb30x@22 { - compatible = "fcs,fusb302"; - reg = <0x22>; - interrupt-parent = <&gpio1>; - interrupts = ; - pinctrl-names = "default"; - pinctrl-0 = <&fusb0_int_pin>; - vbus-supply = <&vbus_typec>; - - connector { - compatible = "usb-c-connector"; - data-role = "dual"; - label = "USB-C"; - op-sink-microwatt = <1000000>; - power-role = "dual"; - sink-pdos = - ; - source-pdos = - ; - try-power-role = "sink"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - usbc_hs: endpoint { - remote-endpoint = - <&u2phy0_typec_hs>; - }; - }; - - port@1 { - reg = <1>; - - usbc_ss: endpoint { - remote-endpoint = - <&tcphy0_typec_ss>; - }; - }; - - port@2 { - reg = <2>; - - usbc_dp: endpoint { - remote-endpoint = - <&tcphy0_typec_dp>; - }; - }; - }; - }; - }; - - cw2015@62 { - compatible = "cellwise,cw2015"; - reg = <0x62>; - cellwise,battery-profile = /bits/ 8 < - 0x17 0x67 0x80 0x73 0x6E 0x6C 0x6B 0x63 - 0x77 0x51 0x5C 0x58 0x50 0x4C 0x48 0x36 - 0x15 0x0C 0x0C 0x19 0x5B 0x7D 0x6F 0x69 - 0x69 0x5B 0x0C 0x29 0x20 0x40 0x52 0x59 - 0x57 0x56 0x54 0x4F 0x3B 0x1F 0x7F 0x17 - 0x06 0x1A 0x30 0x5A 0x85 0x93 0x96 0x2D - 0x48 0x77 0x9C 0xB3 0x80 0x52 0x94 0xCB - 0x2F 0x00 0x64 0xA5 0xB5 0x11 0xF0 0x11 - >; - cellwise,monitor-interval-ms = <5000>; - monitored-battery = <&bat>; - power-supplies = <&mains_charger>, <&fusb0>; - }; -}; - -&i2s1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2s_8ch_mclk_pin>, <&i2s1_2ch_bus>; - rockchip,capture-channels = <8>; - rockchip,playback-channels = <8>; - status = "okay"; -}; - -&io_domains { - audio-supply = <&vcc_3v0>; - gpio1830-supply = <&vcc_3v0>; - sdmmc-supply = <&vcc_sdio>; - status = "okay"; -}; - -&pcie_phy { - status = "okay"; -}; - -&pcie0 { - bus-scan-delay-ms = <1000>; - ep-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>; - num-lanes = <4>; - pinctrl-names = "default"; - pinctrl-0 = <&pcie_clkreqn_cpm>; - vpcie0v9-supply = <&vcca0v9_s3>; - vpcie1v8-supply = <&vcca1v8_s3>; - vpcie3v3-supply = <&vcc3v3_ssd>; - status = "okay"; -}; - -&pinctrl { - buttons { - pwrbtn_pin: pwrbtn-pin { - rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; - }; - - lidbtn_pin: lidbtn-pin { - rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - dc-charger { - dc_det_pin: dc-det-pin { - rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - es8316 { - hp_det_pin: hp-det-pin { - rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - fusb302x { - fusb0_int_pin: fusb0-int-pin { - rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - i2s1 { - i2s_8ch_mclk_pin: i2s-8ch-mclk-pin { - rockchip,pins = <4 RK_PA0 1 &pcfg_pull_none>; - }; - }; - - lcd-panel { - lcdvcc_en_pin: lcdvcc-en-pin { - rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - panel_en_pin: panel-en-pin { - rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - lcd_panel_reset_pin: lcd-panel-reset-pin { - rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - leds { - pwr_led_pin: pwr-led-pin { - rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - slp_led_pin: slp-led-pin { - rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - pmic { - pmic_int_l_pin: pmic-int-l-pin { - rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>; - }; - - vsel1_pin: vsel1-pin { - rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; - }; - - vsel2_pin: vsel2-pin { - rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; - }; - }; - - sdcard { - sdmmc0_pwr_h_pin: sdmmc0-pwr-h-pin { - rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - }; - - sdio-pwrseq { - wifi_enable_h_pin: wifi-enable-h-pin { - rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - usb-typec { - vcc5v0_typec0_en_pin: vcc5v0-typec0-en-pin { - rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - usb2 { - pwr_5v_pin: pwr-5v-pin { - rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - vcc5v0_host_en_pin: vcc5v0-host-en-pin { - rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - wireless-bluetooth { - bt_wake_pin: bt-wake-pin { - rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - bt_host_wake_pin: bt-host-wake-pin { - rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - bt_reset_pin: bt-reset-pin { - rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; -}; - -&pmu_io_domains { - pmu1830-supply = <&vcc_3v0>; - status = "okay"; -}; - -&pwm0 { - status = "okay"; -}; - -&pwm2 { - status = "okay"; -}; - -&saradc { - vref-supply = <&vcca1v8_s3>; - status = "okay"; -}; - -&sdmmc { - bus-width = <4>; - cap-mmc-highspeed; - cap-sd-highspeed; - cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>; - disable-wp; - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>; - sd-uhs-sdr50; - vmmc-supply = <&vcc3v0_sd>; - vqmmc-supply = <&vcc_sdio>; - status = "okay"; -}; - -&sdio0 { - bus-width = <4>; - cap-sd-highspeed; - cap-sdio-irq; - keep-power-in-suspend; - mmc-pwrseq = <&sdio_pwrseq>; - non-removable; - pinctrl-names = "default"; - pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>; - sd-uhs-sdr104; - status = "okay"; -}; - -&sdhci { - bus-width = <8>; - mmc-hs200-1_8v; - non-removable; - status = "okay"; -}; - -&spi1 { - max-freq = <10000000>; - status = "okay"; - - spiflash: flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - m25p,fast-read; - spi-max-frequency = <10000000>; - }; -}; - -&tcphy0 { - status = "okay"; -}; - -&tcphy0_dp { - port { - tcphy0_typec_dp: endpoint { - remote-endpoint = <&usbc_dp>; - }; - }; -}; - -&tcphy0_usb3 { - port { - tcphy0_typec_ss: endpoint { - remote-endpoint = <&usbc_ss>; - }; - }; -}; - -&tcphy1 { - status = "okay"; -}; - -&tsadc { - /* tshut mode 0:CRU 1:GPIO */ - rockchip,hw-tshut-mode = <1>; - /* tshut polarity 0:LOW 1:HIGH */ - rockchip,hw-tshut-polarity = <1>; - status = "okay"; -}; - -&u2phy0 { - status = "okay"; - - u2phy0_otg: otg-port { - status = "okay"; - }; - - u2phy0_host: host-port { - phy-supply = <&vcc5v0_otg>; - status = "okay"; - }; - - port { - u2phy0_typec_hs: endpoint { - remote-endpoint = <&usbc_hs>; - }; - }; -}; - -&u2phy1 { - status = "okay"; - - u2phy1_otg: otg-port { - status = "okay"; - }; - - u2phy1_host: host-port { - phy-supply = <&vcc5v0_otg>; - status = "okay"; - }; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; - uart-has-rtscts; - status = "okay"; - - bluetooth { - compatible = "brcm,bcm4345c5"; - clocks = <&rk808 1>; - clock-names = "lpo"; - device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>; - host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>; - max-speed = <1500000>; - pinctrl-names = "default"; - pinctrl-0 = <&bt_host_wake_pin &bt_wake_pin &bt_reset_pin>; - shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>; - vbat-supply = <&wifi_bat>; - vddio-supply = <&vcc_wl>; - }; -}; - -&uart2 { - status = "okay"; -}; - -&usb_host0_ehci { - status = "okay"; -}; - -&usb_host0_ohci { - status = "okay"; -}; - -&usb_host1_ehci { - status = "okay"; -}; - -&usb_host1_ohci { - status = "okay"; -}; - -&usbdrd3_0 { - status = "okay"; -}; - -&usbdrd_dwc3_0 { - dr_mode = "host"; - status = "okay"; -}; - -&usbdrd3_1 { - status = "okay"; -}; - -&usbdrd_dwc3_1 { - dr_mode = "host"; - status = "okay"; -}; - -&vopb { - status = "okay"; -}; - -&vopb_mmu { - status = "okay"; -}; - -&vopl { - status = "okay"; -}; - -&vopl_mmu { - status = "okay"; -}; diff --git a/arch/arm/dts/rk3399-pinephone-pro.dts b/arch/arm/dts/rk3399-pinephone-pro.dts deleted file mode 100644 index 61f3fec5a8b1..000000000000 --- a/arch/arm/dts/rk3399-pinephone-pro.dts +++ /dev/null @@ -1,621 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2020 Martijn Braam - * Copyright (c) 2021 Kamil Trzciński - */ - -/* - * PinePhone Pro datasheet: - * https://files.pine64.org/doc/PinePhonePro/PinephonePro-Schematic-V1.0-20211127.pdf - */ - -/dts-v1/; -#include -#include -#include "rk3399.dtsi" -#include "rk3399-opp.dtsi" - -/ { - model = "Pine64 PinePhonePro"; - compatible = "pine64,pinephone-pro", "rockchip,rk3399"; - chassis-type = "handset"; - - aliases { - mmc0 = &sdio0; - mmc1 = &sdmmc; - mmc2 = &sdhci; - }; - - chosen { - stdout-path = "serial2:115200n8"; - }; - - adc-keys { - compatible = "adc-keys"; - io-channels = <&saradc 1>; - io-channel-names = "buttons"; - keyup-threshold-microvolt = <1600000>; - poll-interval = <100>; - - button-up { - label = "Volume Up"; - linux,code = ; - press-threshold-microvolt = <100000>; - }; - - button-down { - label = "Volume Down"; - linux,code = ; - press-threshold-microvolt = <600000>; - }; - }; - - backlight: backlight { - compatible = "pwm-backlight"; - pwms = <&pwm0 0 50000 0>; - }; - - gpio-keys { - compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = <&pwrbtn_pin>; - - key-power { - debounce-interval = <20>; - gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; - label = "Power"; - linux,code = ; - wakeup-source; - }; - }; - - vcc_sys: vcc-sys-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc_sys"; - regulator-always-on; - regulator-boot-on; - }; - - vcc3v3_sys: vcc3v3-sys-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc3v3_sys"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vcc_sys>; - }; - - vcca1v8_s3: vcc1v8-s3-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcca1v8_s3"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vcc3v3_sys>; - regulator-always-on; - regulator-boot-on; - }; - - vcc1v8_codec: vcc1v8-codec-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio3 RK_PA4 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&vcc1v8_codec_en>; - regulator-name = "vcc1v8_codec"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vcc3v3_sys>; - }; - - wifi_pwrseq: sdio-wifi-pwrseq { - compatible = "mmc-pwrseq-simple"; - clocks = <&rk818 1>; - clock-names = "ext_clock"; - pinctrl-names = "default"; - pinctrl-0 = <&wifi_enable_h_pin>; - /* - * Wait between power-on and SDIO access for CYP43455 - * POR circuit. - */ - post-power-on-delay-ms = <110>; - /* - * Wait between consecutive toggles for CYP43455 CBUCK - * regulator discharge. - */ - power-off-delay-us = <10000>; - - /* WL_REG_ON on module */ - reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; - }; - - /* MIPI DSI panel 1.8v supply */ - vcc1v8_lcd: vcc1v8-lcd { - compatible = "regulator-fixed"; - enable-active-high; - regulator-name = "vcc1v8_lcd"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vcc3v3_sys>; - gpio = <&gpio3 RK_PA5 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - }; - - /* MIPI DSI panel 2.8v supply */ - vcc2v8_lcd: vcc2v8-lcd { - compatible = "regulator-fixed"; - enable-active-high; - regulator-name = "vcc2v8_lcd"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - vin-supply = <&vcc3v3_sys>; - gpio = <&gpio3 RK_PA1 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - }; -}; - -&cpu_alert0 { - temperature = <65000>; -}; -&cpu_alert1 { - temperature = <68000>; -}; - -&cpu_l0 { - cpu-supply = <&vdd_cpu_l>; -}; - -&cpu_l1 { - cpu-supply = <&vdd_cpu_l>; -}; - -&cpu_l2 { - cpu-supply = <&vdd_cpu_l>; -}; - -&cpu_l3 { - cpu-supply = <&vdd_cpu_l>; -}; - -&cpu_b0 { - cpu-supply = <&vdd_cpu_b>; -}; - -&cpu_b1 { - cpu-supply = <&vdd_cpu_b>; -}; - -&emmc_phy { - status = "okay"; -}; - -&gpu { - mali-supply = <&vdd_gpu>; - status = "okay"; -}; - -&i2c0 { - clock-frequency = <400000>; - i2c-scl-rising-time-ns = <168>; - i2c-scl-falling-time-ns = <4>; - status = "okay"; - - rk818: pmic@1c { - compatible = "rockchip,rk818"; - reg = <0x1c>; - interrupt-parent = <&gpio1>; - interrupts = ; - #clock-cells = <1>; - clock-output-names = "xin32k", "rk808-clkout2"; - pinctrl-names = "default"; - pinctrl-0 = <&pmic_int_l>; - rockchip,system-power-controller; - wakeup-source; - - vcc1-supply = <&vcc_sys>; - vcc2-supply = <&vcc_sys>; - vcc3-supply = <&vcc_sys>; - vcc4-supply = <&vcc_sys>; - vcc6-supply = <&vcc_sys>; - vcc7-supply = <&vcc3v3_sys>; - vcc8-supply = <&vcc_sys>; - vcc9-supply = <&vcc3v3_sys>; - - regulators { - vdd_cpu_l: DCDC_REG1 { - regulator-name = "vdd_cpu_l"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <875000>; - regulator-max-microvolt = <975000>; - regulator-ramp-delay = <6001>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_center: DCDC_REG2 { - regulator-name = "vdd_center"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1000000>; - regulator-ramp-delay = <6001>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_ddr: DCDC_REG3 { - regulator-name = "vcc_ddr"; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - vcc_1v8: DCDC_REG4 { - regulator-name = "vcc_1v8"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - vcca3v0_codec: LDO_REG1 { - regulator-name = "vcca3v0_codec"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - - vcc3v0_touch: LDO_REG2 { - regulator-name = "vcc3v0_touch"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - - vcca1v8_codec: LDO_REG3 { - regulator-name = "vcca1v8_codec"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - rk818_pwr_on: LDO_REG4 { - regulator-name = "rk818_pwr_on"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - vcc_3v0: LDO_REG5 { - regulator-name = "vcc_3v0"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - vcc_1v5: LDO_REG6 { - regulator-name = "vcc_1v5"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - vcc1v8_dvp: LDO_REG7 { - regulator-name = "vcc1v8_dvp"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - vcc3v3_s3: LDO_REG8 { - regulator-name = "vcc3v3_s3"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vccio_sd: LDO_REG9 { - regulator-name = "vccio_sd"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - vcc3v3_s0: SWITCH_REG { - regulator-name = "vcc3v3_s0"; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - }; - }; - - vdd_cpu_b: regulator@40 { - compatible = "silergy,syr827"; - reg = <0x40>; - fcs,suspend-voltage-selector = <1>; - pinctrl-names = "default"; - pinctrl-0 = <&vsel1_pin>; - regulator-name = "vdd_cpu_b"; - regulator-min-microvolt = <875000>; - regulator-max-microvolt = <1150000>; - regulator-ramp-delay = <1000>; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_gpu: regulator@41 { - compatible = "silergy,syr828"; - reg = <0x41>; - fcs,suspend-voltage-selector = <1>; - pinctrl-names = "default"; - pinctrl-0 = <&vsel2_pin>; - regulator-name = "vdd_gpu"; - regulator-min-microvolt = <875000>; - regulator-max-microvolt = <975000>; - regulator-ramp-delay = <1000>; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; -}; - -&i2c3 { - i2c-scl-rising-time-ns = <450>; - i2c-scl-falling-time-ns = <15>; - status = "okay"; - - touchscreen@14 { - compatible = "goodix,gt1158"; - reg = <0x14>; - interrupt-parent = <&gpio3>; - interrupts = ; - irq-gpios = <&gpio3 RK_PB5 GPIO_ACTIVE_HIGH>; - reset-gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_HIGH>; - AVDD28-supply = <&vcc3v0_touch>; - VDDIO-supply = <&vcc3v0_touch>; - touchscreen-size-x = <720>; - touchscreen-size-y = <1440>; - }; -}; - -&cluster0_opp { - opp04 { - status = "disabled"; - }; - - opp05 { - status = "disabled"; - }; -}; - -&cluster1_opp { - opp06 { - opp-hz = /bits/ 64 <1500000000>; - opp-microvolt = <1100000 1100000 1150000>; - }; - - opp07 { - status = "disabled"; - }; -}; - -&io_domains { - bt656-supply = <&vcc1v8_dvp>; - audio-supply = <&vcca1v8_codec>; - sdmmc-supply = <&vccio_sd>; - gpio1830-supply = <&vcc_3v0>; - status = "okay"; -}; - -&mipi_dsi { - status = "okay"; - clock-master; - - ports { - mipi_out: port@1 { - #address-cells = <0>; - #size-cells = <0>; - reg = <1>; - - mipi_out_panel: endpoint { - remote-endpoint = <&mipi_in_panel>; - }; - }; - }; - - panel@0 { - compatible = "hannstar,hsd060bhw4"; - reg = <0>; - backlight = <&backlight>; - reset-gpios = <&gpio4 RK_PD1 GPIO_ACTIVE_LOW>; - vcc-supply = <&vcc2v8_lcd>; - iovcc-supply = <&vcc1v8_lcd>; - pinctrl-names = "default"; - - port { - mipi_in_panel: endpoint { - remote-endpoint = <&mipi_out_panel>; - }; - }; - }; -}; - -&pmu_io_domains { - pmu1830-supply = <&vcc_1v8>; - status = "okay"; -}; - -&pinctrl { - buttons { - pwrbtn_pin: pwrbtn-pin { - rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - pmic { - pmic_int_l: pmic-int-l { - rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; - }; - - vsel1_pin: vsel1-pin { - rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; - }; - - vsel2_pin: vsel2-pin { - rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; - }; - }; - - sdio-pwrseq { - wifi_enable_h_pin: wifi-enable-h-pin { - rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - sound { - vcc1v8_codec_en: vcc1v8-codec-en { - rockchip,pins = <3 RK_PA4 RK_FUNC_GPIO &pcfg_pull_down>; - }; - }; - - wireless-bluetooth { - bt_wake_pin: bt-wake-pin { - rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - bt_host_wake_pin: bt-host-wake-pin { - rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - bt_reset_pin: bt-reset-pin { - rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; -}; - -&sdio0 { - bus-width = <4>; - cap-sd-highspeed; - cap-sdio-irq; - disable-wp; - keep-power-in-suspend; - mmc-pwrseq = <&wifi_pwrseq>; - non-removable; - pinctrl-names = "default"; - pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>; - sd-uhs-sdr104; - status = "okay"; -}; - -&pwm0 { - status = "okay"; -}; - -&saradc { - vref-supply = <&vcca1v8_s3>; - status = "okay"; -}; - -&sdmmc { - bus-width = <4>; - cap-sd-highspeed; - cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>; - disable-wp; - max-frequency = <150000000>; - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; - vmmc-supply = <&vcc3v3_sys>; - vqmmc-supply = <&vccio_sd>; - status = "okay"; -}; - -&sdhci { - bus-width = <8>; - mmc-hs200-1_8v; - non-removable; - status = "okay"; -}; - -&tsadc { - rockchip,hw-tshut-mode = <1>; - rockchip,hw-tshut-polarity = <1>; - status = "okay"; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; - uart-has-rtscts; - status = "okay"; - - bluetooth { - compatible = "brcm,bcm4345c5"; - clocks = <&rk818 1>; - clock-names = "lpo"; - device-wakeup-gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>; - host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>; - max-speed = <1500000>; - pinctrl-names = "default"; - pinctrl-0 = <&bt_host_wake_pin &bt_wake_pin &bt_reset_pin>; - shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>; - vbat-supply = <&vcc3v3_sys>; - vddio-supply = <&vcc_1v8>; - }; -}; - -&uart2 { - status = "okay"; -}; - -&vopb { - status = "okay"; - assigned-clocks = <&cru DCLK_VOP0_DIV>, <&cru DCLK_VOP0>, - <&cru ACLK_VOP0>, <&cru HCLK_VOP0>; - assigned-clock-rates = <0>, <0>, <400000000>, <100000000>; - assigned-clock-parents = <&cru PLL_GPLL>, <&cru DCLK_VOP0_DIV>; -}; - -&vopb_mmu { - status = "okay"; -}; - -&vopl { - status = "okay"; - assigned-clocks = <&cru DCLK_VOP1_DIV>, <&cru DCLK_VOP1>, - <&cru ACLK_VOP1>, <&cru HCLK_VOP1>; - assigned-clock-rates = <0>, <0>, <400000000>, <100000000>; - assigned-clock-parents = <&cru PLL_GPLL>, <&cru DCLK_VOP1_DIV>; -}; - -&vopl_mmu { - status = "okay"; -}; diff --git a/arch/arm/dts/rk3399-puma-haikou.dts b/arch/arm/dts/rk3399-puma-haikou.dts deleted file mode 100644 index 18a98c4648ea..000000000000 --- a/arch/arm/dts/rk3399-puma-haikou.dts +++ /dev/null @@ -1,306 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2017 Theobroma Systems Design und Consulting GmbH - */ - -/dts-v1/; -#include "rk3399-puma.dtsi" -#include - -/ { - model = "Theobroma Systems RK3399-Q7 SoM"; - compatible = "tsd,rk3399-puma-haikou", "rockchip,rk3399"; - - aliases { - mmc1 = &sdmmc; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - gpio-keys { - compatible = "gpio-keys"; - pinctrl-0 = <&haikou_keys_pin>; - pinctrl-names = "default"; - - button-batlow-n { - gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; - label = "BATLOW#"; - linux,code = ; - }; - - button-slp-btn-n { - gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_LOW>; - label = "SLP_BTN#"; - linux,code = ; - }; - - button-wake-n { - gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_LOW>; - label = "WAKE#"; - linux,code = ; - wakeup-source; - }; - - switch-lid-btn-n { - gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; - label = "LID_BTN#"; - linux,code = ; - linux,input-type = ; - }; - }; - - leds { - pinctrl-0 = <&module_led_pin>, <&sd_card_led_pin>; - - sd_card_led: led-1 { - label = "sd_card_led"; - gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "mmc0"; - }; - }; - - i2s0-sound { - compatible = "simple-audio-card"; - simple-audio-card,format = "i2s"; - simple-audio-card,name = "Haikou,I2S-codec"; - simple-audio-card,mclk-fs = <512>; - - simple-audio-card,codec { - clocks = <&sgtl5000_clk>; - sound-dai = <&sgtl5000>; - }; - - simple-audio-card,cpu { - bitclock-master; - frame-master; - sound-dai = <&i2s0>; - }; - }; - - sgtl5000_clk: sgtl5000-oscillator { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <24576000>; - }; - - dc_12v: dc-12v { - compatible = "regulator-fixed"; - regulator-name = "dc_12v"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - }; - - vcc3v3_baseboard: vcc3v3-baseboard { - compatible = "regulator-fixed"; - regulator-name = "vcc3v3_baseboard"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&dc_12v>; - }; - - vcc5v0_baseboard: vcc5v0-baseboard { - compatible = "regulator-fixed"; - regulator-name = "vcc5v0_baseboard"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&dc_12v>; - }; - - vcc5v0_otg: vcc5v0-otg-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&otg_vbus_drv>; - regulator-name = "vcc5v0_otg"; - regulator-always-on; - }; - - vdda_codec: vdda-codec { - compatible = "regulator-fixed"; - regulator-name = "vdda_codec"; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vcc5v0_baseboard>; - }; - - vddd_codec: vddd-codec { - compatible = "regulator-fixed"; - regulator-name = "vddd_codec"; - regulator-boot-on; - regulator-min-microvolt = <1600000>; - regulator-max-microvolt = <1600000>; - vin-supply = <&vcc5v0_baseboard>; - }; -}; - -&hdmi { - ddc-i2c-bus = <&i2c3>; - status = "okay"; -}; - -&i2c1 { - status = "okay"; - clock-frequency = <400000>; -}; - -&i2c2 { - status = "okay"; - clock-frequency = <400000>; -}; - -&i2c3 { - i2c-scl-rising-time-ns = <450>; - i2c-scl-falling-time-ns = <15>; - status = "okay"; -}; - -&i2c4 { - status = "okay"; - clock-frequency = <400000>; - - sgtl5000: codec@a { - compatible = "fsl,sgtl5000"; - reg = <0x0a>; - clocks = <&sgtl5000_clk>; - #sound-dai-cells = <0>; - VDDA-supply = <&vdda_codec>; - VDDIO-supply = <&vdda_codec>; - VDDD-supply = <&vddd_codec>; - status = "okay"; - }; -}; - -&i2c6 { - status = "okay"; - clock-frequency = <400000>; -}; - -&pcie_phy { - status = "okay"; -}; - -&pcie0 { - ep-gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>; - num-lanes = <4>; - pinctrl-names = "default"; - pinctrl-0 = <&pcie_clkreqn_cpm>; - status = "okay"; -}; - -&pinctrl { - buttons { - haikou_keys_pin: haikou-keys-pin { - rockchip,pins = - /* LID_BTN */ - <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>, - /* BATLOW# */ - <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>, - /* SLP_BTN# */ - <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>, - /* WAKE# */ - <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - leds { - sd_card_led_pin: sd-card-led-pin { - rockchip,pins = - <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - usb2 { - otg_vbus_drv: otg-vbus-drv { - rockchip,pins = - <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; -}; - -&pwm0 { - status = "okay"; -}; - -&sdmmc { - bus-width = <4>; - cap-mmc-highspeed; - cap-sd-highspeed; - cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>; - disable-wp; - max-frequency = <40000000>; - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; - vmmc-supply = <&vcc3v3_baseboard>; - status = "okay"; -}; - -&spi5 { - status = "okay"; -}; - -&tcphy0 { - status = "okay"; -}; - -&u2phy0 { - status = "okay"; -}; - -&usbdrd3_0 { - status = "okay"; -}; - -&usbdrd_dwc3_0 { - dr_mode = "otg"; - extcon = <&extcon_usb3>; - status = "okay"; -}; - -&u2phy0_host { - phy-supply = <&vcc5v0_otg>; - status = "okay"; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; - status = "okay"; -}; - -&uart2 { - status = "okay"; -}; - -&usb_host0_ehci { - status = "okay"; -}; - -&usb_host0_ohci { - status = "okay"; -}; - -&vopb { - status = "okay"; -}; - -&vopb_mmu { - status = "okay"; -}; - -&vopl { - status = "okay"; -}; - -&vopl_mmu { - status = "okay"; -}; diff --git a/arch/arm/dts/rk3399-puma.dtsi b/arch/arm/dts/rk3399-puma.dtsi deleted file mode 100644 index c08e69391c01..000000000000 --- a/arch/arm/dts/rk3399-puma.dtsi +++ /dev/null @@ -1,532 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2017 Theobroma Systems Design und Consulting GmbH - */ - -#include -#include "rk3399.dtsi" -#include "rk3399-opp.dtsi" - -/ { - aliases { - ethernet0 = &gmac; - mmc0 = &sdhci; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&module_led_pin>; - - module_led: led-0 { - label = "module_led"; - gpios = <&gpio2 RK_PD1 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - panic-indicator; - }; - }; - - extcon_usb3: extcon-usb3 { - compatible = "linux,extcon-usb-gpio"; - id-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&usb3_id>; - }; - - clkin_gmac: external-gmac-clock { - compatible = "fixed-clock"; - clock-frequency = <125000000>; - clock-output-names = "clkin_gmac"; - #clock-cells = <0>; - }; - - vcc1v2_phy: vcc1v2-phy { - compatible = "regulator-fixed"; - regulator-name = "vcc1v2_phy"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - vin-supply = <&vcc5v0_sys>; - }; - - vcc3v3_sys: vcc3v3-sys { - compatible = "regulator-fixed"; - regulator-name = "vcc3v3_sys"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vcc5v0_sys>; - }; - - vcc5v0_host: vcc5v0-host-regulator { - compatible = "regulator-fixed"; - gpio = <&gpio4 RK_PA3 GPIO_ACTIVE_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&vcc5v0_host_en>; - regulator-name = "vcc5v0_host"; - regulator-always-on; - vin-supply = <&vcc5v0_sys>; - }; - - vcc5v0_sys: vcc5v0-sys { - compatible = "regulator-fixed"; - regulator-name = "vcc5v0_sys"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; - - vdd_log: vdd-log { - compatible = "pwm-regulator"; - pwms = <&pwm2 0 25000 1>; - pwm-supply = <&vcc5v0_sys>; - regulator-name = "vdd_log"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1400000>; - regulator-always-on; - regulator-boot-on; - }; -}; - -&cpu_b0 { - cpu-supply = <&vdd_cpu_b>; -}; - -&cpu_b1 { - cpu-supply = <&vdd_cpu_b>; -}; - -&cpu_l0 { - cpu-supply = <&vdd_cpu_l>; -}; - -&cpu_l1 { - cpu-supply = <&vdd_cpu_l>; -}; - -&cpu_l2 { - cpu-supply = <&vdd_cpu_l>; -}; - -&cpu_l3 { - cpu-supply = <&vdd_cpu_l>; -}; - -&emmc_phy { - status = "okay"; - drive-impedance-ohm = <33>; -}; - -&gpio0 { - /* - * The BIOS_DISABLE hog is a feedback pin for the actual status of the - * signal. This usually represents the state of a switch on the baseboard. - * The pin has a 10k pull-up resistor connected, so no pull-up setting is needed. - */ - bios-disable-hog { - gpios = ; - gpio-hog; - input; - line-name = "bios_disable"; - }; -}; - -&gmac { - assigned-clocks = <&cru SCLK_RMII_SRC>; - assigned-clock-parents = <&clkin_gmac>; - clock_in_out = "input"; - phy-supply = <&vcc1v2_phy>; - phy-mode = "rgmii"; - pinctrl-names = "default"; - pinctrl-0 = <&rgmii_pins>; - snps,reset-gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>; - snps,reset-active-low; - snps,reset-delays-us = <0 10000 50000>; - tx_delay = <0x10>; - rx_delay = <0x10>; - status = "okay"; -}; - -&gpu { - mali-supply = <&vdd_gpu>; - status = "okay"; -}; - -&i2c0 { - status = "okay"; - i2c-scl-rising-time-ns = <168>; - i2c-scl-falling-time-ns = <4>; - clock-frequency = <400000>; - - rk808: pmic@1b { - compatible = "rockchip,rk808"; - reg = <0x1b>; - interrupt-parent = <&gpio1>; - interrupts = <22 IRQ_TYPE_LEVEL_LOW>; - #clock-cells = <1>; - clock-output-names = "xin32k", "rk808-clkout2"; - pinctrl-names = "default"; - pinctrl-0 = <&pmic_int_l>; - rockchip,system-power-controller; - wakeup-source; - - vcc1-supply = <&vcc5v0_sys>; - vcc2-supply = <&vcc5v0_sys>; - vcc3-supply = <&vcc5v0_sys>; - vcc4-supply = <&vcc5v0_sys>; - vcc6-supply = <&vcc5v0_sys>; - vcc7-supply = <&vcc5v0_sys>; - vcc8-supply = <&vcc3v3_sys>; - vcc9-supply = <&vcc5v0_sys>; - vcc10-supply = <&vcc5v0_sys>; - vcc11-supply = <&vcc5v0_sys>; - vcc12-supply = <&vcc3v3_sys>; - vddio-supply = <&vcc1v8_pmu>; - - regulators { - vdd_center: DCDC_REG1 { - regulator-name = "vdd_center"; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1350000>; - regulator-ramp-delay = <6001>; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_cpu_l: DCDC_REG2 { - regulator-name = "vdd_cpu_l"; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1350000>; - regulator-ramp-delay = <6001>; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_ddr: DCDC_REG3 { - regulator-name = "vcc_ddr"; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - vcc_1v8: DCDC_REG4 { - regulator-name = "vcc_1v8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vcc_ldo1: LDO_REG1 { - regulator-name = "vcc_ldo1"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc1v8_hdmi: LDO_REG2 { - regulator-name = "vcc1v8_hdmi"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc1v8_pmu: LDO_REG3 { - regulator-name = "vcc1v8_pmu"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vcc_sd: LDO_REG4 { - regulator-name = "vcc_sd"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3000000>; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3000000>; - }; - }; - - vcc_ldo5: LDO_REG5 { - regulator-name = "vcc_ldo5"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-boot-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_ldo6: LDO_REG6 { - regulator-name = "vcc_ldo6"; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - regulator-boot-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc0v9_hdmi: LDO_REG7 { - regulator-name = "vcc0v9_hdmi"; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <900000>; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_efuse: LDO_REG8 { - regulator-name = "vcc_efuse"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc3v3_s3: SWITCH_REG1 { - regulator-name = "vcc3v3_s3"; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc3v3_s0: SWITCH_REG2 { - regulator-name = "vcc3v3_s0"; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - }; - }; - - vdd_gpu: regulator@60 { - compatible = "fcs,fan53555"; - reg = <0x60>; - fcs,suspend-voltage-selector = <1>; - regulator-name = "vdd_gpu"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <1230000>; - regulator-ramp-delay = <1000>; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vcc5v0_sys>; - }; -}; - -&i2c7 { - status = "okay"; - clock-frequency = <400000>; - - fan: fan@18 { - compatible = "ti,amc6821"; - reg = <0x18>; - #cooling-cells = <2>; - }; - - rtc_twi: rtc@6f { - compatible = "isil,isl1208"; - reg = <0x6f>; - }; -}; - -&i2c8 { - status = "okay"; - clock-frequency = <400000>; - - vdd_cpu_b: regulator@60 { - compatible = "fcs,fan53555"; - reg = <0x60>; - vin-supply = <&vcc5v0_sys>; - regulator-name = "vdd_cpu_b"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <1230000>; - regulator-ramp-delay = <1000>; - fcs,suspend-voltage-selector = <1>; - regulator-always-on; - regulator-boot-on; - }; -}; - -&i2s0 { - pinctrl-0 = <&i2s0_2ch_bus>; - rockchip,playback-channels = <2>; - rockchip,capture-channels = <2>; - status = "okay"; -}; - -/* - * As Q7 does not specify neither a global nor a RX clock for I2S these - * signals are not used. Furthermore I2S0_LRCK_RX is used as GPIO. - * Therefore we have to redefine the i2s0_2ch_bus definition to prevent - * conflicts. - */ -&i2s0_2ch_bus { - rockchip,pins = - <3 RK_PD0 1 &pcfg_pull_none>, - <3 RK_PD2 1 &pcfg_pull_none>, - <3 RK_PD3 1 &pcfg_pull_none>, - <3 RK_PD7 1 &pcfg_pull_none>; -}; - -&io_domains { - status = "okay"; - bt656-supply = <&vcc_1v8>; - audio-supply = <&vcc_1v8>; - sdmmc-supply = <&vcc_sd>; - gpio1830-supply = <&vcc_1v8>; -}; - -&pmu_io_domains { - status = "okay"; - pmu1830-supply = <&vcc_1v8>; -}; - -&pwm2 { - status = "okay"; -}; - -&pinctrl { - i2c8 { - i2c8_xfer_a: i2c8-xfer { - rockchip,pins = - <1 RK_PC4 1 &pcfg_pull_up>, - <1 RK_PC5 1 &pcfg_pull_up>; - }; - }; - - leds { - module_led_pin: module-led-pin { - rockchip,pins = - <2 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - pmic { - pmic_int_l: pmic-int-l { - rockchip,pins = - <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - usb2 { - vcc5v0_host_en: vcc5v0-host-en { - rockchip,pins = - <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - usb3 { - usb3_id: usb3-id { - rockchip,pins = - <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; -}; - -&sdhci { - /* - * Signal integrity isn't great at 200MHz but 100MHz has proven stable - * enough. - */ - max-frequency = <100000000>; - - bus-width = <8>; - mmc-hs400-1_8v; - mmc-hs400-enhanced-strobe; - non-removable; - status = "okay"; -}; - -&sdmmc { - vqmmc-supply = <&vcc_sd>; -}; - -&spi1 { - status = "okay"; - - norflash: flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <50000000>; - }; -}; - -&tcphy1 { - status = "okay"; -}; - -&tsadc { - rockchip,hw-tshut-mode = <1>; - rockchip,hw-tshut-polarity = <1>; - status = "okay"; -}; - -&u2phy1 { - status = "okay"; - - u2phy1_otg: otg-port { - status = "okay"; - }; - - u2phy1_host: host-port { - phy-supply = <&vcc5v0_host>; - status = "okay"; - }; -}; - -&usbdrd3_1 { - status = "okay"; -}; - -&usbdrd_dwc3_1 { - status = "okay"; - dr_mode = "host"; -}; - -&usb_host1_ehci { - status = "okay"; -}; - -&usb_host1_ohci { - status = "okay"; -}; diff --git a/arch/arm/dts/rk3399-roc-pc-mezzanine.dts b/arch/arm/dts/rk3399-roc-pc-mezzanine.dts deleted file mode 100644 index 9447c8724b65..000000000000 --- a/arch/arm/dts/rk3399-roc-pc-mezzanine.dts +++ /dev/null @@ -1,111 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2017 T-Chip Intelligent Technology Co., Ltd - * Copyright (c) 2019 Markus Reichl - */ - -/dts-v1/; -#include "rk3399-roc-pc.dtsi" - -/ { - model = "Firefly ROC-RK3399-PC Mezzanine Board"; - compatible = "firefly,roc-rk3399-pc-mezzanine", "rockchip,rk3399"; - - aliases { - mmc2 = &sdio0; - }; - - /* MP8009 PoE PD */ - poe_12v: poe-12v { - compatible = "regulator-fixed"; - regulator-name = "poe_12v"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - }; - - vcc3v3_ngff: vcc3v3-ngff { - compatible = "regulator-fixed"; - regulator-name = "vcc3v3_ngff"; - enable-active-high; - gpio = <&gpio4 RK_PD3 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&vcc3v3_ngff_en>; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&sys_12v>; - }; - - vcc3v3_pcie: vcc3v3-pcie { - compatible = "regulator-fixed"; - regulator-name = "vcc3v3_pcie"; - enable-active-high; - gpio = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&vcc3v3_pcie_en>; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&sys_12v>; - }; -}; - -&sys_12v { - vin-supply = <&poe_12v>; -}; - -&pcie_phy { - status = "okay"; -}; - -&pcie0 { - ep-gpios = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>; - num-lanes = <4>; - pinctrl-names = "default"; - pinctrl-0 = <&pcie_perst>; - vpcie3v3-supply = <&vcc3v3_pcie>; - vpcie1v8-supply = <&vcc1v8_pmu>; - vpcie0v9-supply = <&vcca_0v9>; - status = "okay"; -}; - -&pinctrl { - ngff { - vcc3v3_ngff_en: vcc3v3-ngff-en { - rockchip,pins = <4 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - pcie { - vcc3v3_pcie_en: vcc3v3-pcie-en { - rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - pcie_perst: pcie-perst { - rockchip,pins = <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; -}; - -&sdio0 { - bus-width = <4>; - cap-sd-highspeed; - cap-sdio-irq; - keep-power-in-suspend; - mmc-pwrseq = <&sdio_pwrseq>; - non-removable; - pinctrl-names = "default"; - pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>; - sd-uhs-sdr104; - vmmc-supply = <&vcc3v3_ngff>; - vqmmc-supply = <&vcc_1v8>; - status = "okay"; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; - status = "okay"; -}; diff --git a/arch/arm/dts/rk3399-roc-pc.dts b/arch/arm/dts/rk3399-roc-pc.dts deleted file mode 100644 index cd4195425309..000000000000 --- a/arch/arm/dts/rk3399-roc-pc.dts +++ /dev/null @@ -1,12 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2017 T-Chip Intelligent Technology Co., Ltd - */ - -/dts-v1/; -#include "rk3399-roc-pc.dtsi" - -/ { - model = "Firefly ROC-RK3399-PC Board"; - compatible = "firefly,roc-rk3399-pc", "rockchip,rk3399"; -}; diff --git a/arch/arm/dts/rk3399-roc-pc.dtsi b/arch/arm/dts/rk3399-roc-pc.dtsi deleted file mode 100644 index ca7a446b6568..000000000000 --- a/arch/arm/dts/rk3399-roc-pc.dtsi +++ /dev/null @@ -1,844 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2017 T-Chip Intelligent Technology Co., Ltd - */ - -/dts-v1/; -#include -#include -#include "rk3399.dtsi" -#include "rk3399-opp.dtsi" - -/ { - model = "Firefly ROC-RK3399-PC Board"; - compatible = "firefly,roc-rk3399-pc", "rockchip,rk3399"; - - aliases { - ethernet0 = &gmac; - mmc0 = &sdmmc; - mmc1 = &sdhci; - }; - - chosen { - stdout-path = "serial2:1500000n8"; - }; - - backlight: backlight { - compatible = "pwm-backlight"; - pwms = <&pwm0 0 25000 0>; - }; - - clkin_gmac: external-gmac-clock { - compatible = "fixed-clock"; - clock-frequency = <125000000>; - clock-output-names = "clkin_gmac"; - #clock-cells = <0>; - }; - - adc-keys { - compatible = "adc-keys"; - io-channels = <&saradc 1>; - io-channel-names = "buttons"; - keyup-threshold-microvolt = <1500000>; - poll-interval = <100>; - - button-recovery { - label = "Recovery"; - linux,code = ; - press-threshold-microvolt = <18000>; - }; - }; - - gpio-keys { - compatible = "gpio-keys"; - autorepeat; - pinctrl-names = "default"; - pinctrl-0 = <&pwr_key_l>; - - key-power { - debounce-interval = <100>; - gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; - label = "GPIO Key Power"; - linux,code = ; - wakeup-source; - }; - }; - - ir-receiver { - compatible = "gpio-ir-receiver"; - gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&ir_int>; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&work_led_pin>, <&diy_led_pin>, <&yellow_led_pin>; - - work_led: led-0 { - label = "green:work"; - gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>; - default-state = "on"; - linux,default-trigger = "heartbeat"; - }; - - diy_led: led-1 { - label = "red:diy"; - gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>; - default-state = "off"; - linux,default-trigger = "mmc2"; - }; - - yellow_led: led-2 { - label = "yellow:yellow-led"; - gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>; - default-state = "off"; - linux,default-trigger = "mmc1"; - }; - }; - - sdio_pwrseq: sdio-pwrseq { - compatible = "mmc-pwrseq-simple"; - clocks = <&rk808 1>; - clock-names = "ext_clock"; - pinctrl-names = "default"; - pinctrl-0 = <&wifi_enable_h>; - - /* - * On the module itself this is one of these (depending - * on the actual card populated): - * - SDIO_RESET_L_WL_REG_ON - * - PDN (power down when low) - */ - reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; - }; - - vcc_vbus_typec0: vcc-vbus-typec0 { - compatible = "regulator-fixed"; - regulator-name = "vcc_vbus_typec0"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; - - sys_12v: sys-12v { - compatible = "regulator-fixed"; - regulator-name = "sys_12v"; - regulator-always-on; - regulator-boot-on; - vin-supply = <&dc_12v>; - }; - - /* switched by pmic_sleep */ - vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 { - compatible = "regulator-fixed"; - regulator-name = "vcc1v8_s3"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vcc_1v8>; - }; - - vcc3v0_sd: vcc3v0-sd { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio4 RK_PD6 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&vcc3v0_sd_en>; - regulator-name = "vcc3v0_sd"; - regulator-boot-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - vin-supply = <&vcc3v3_sys>; - }; - - vcc3v3_sys: vcc3v3-sys { - compatible = "regulator-fixed"; - regulator-name = "vcc3v3_sys"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&sys_12v>; - }; - - vcca_0v9: vcca-0v9 { - compatible = "regulator-fixed"; - regulator-name = "vcca_0v9"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <900000>; - vin-supply = <&vcc3v3_sys>; - }; - - /* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */ - vcc5v0_host: vcc5v0-host-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&vcc5v0_host_en &hub_rst>; - regulator-name = "vcc5v0_host"; - vin-supply = <&vcc_sys>; - }; - - vcc_vbus_typec1: vcc-vbus-typec1 { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&vcc_vbus_typec1_en>; - regulator-name = "vcc_vbus_typec1"; - regulator-always-on; - vin-supply = <&vcc_sys>; - }; - - vcc_sys: vcc-sys { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio2 RK_PA6 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&vcc_sys_en>; - regulator-name = "vcc_sys"; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&sys_12v>; - }; - - vdd_log: vdd-log { - compatible = "pwm-regulator"; - pwms = <&pwm2 0 25000 1>; - regulator-name = "vdd_log"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <450000>; - regulator-max-microvolt = <1400000>; - pwm-supply = <&vcc3v3_sys>; - }; -}; - -&cpu_l0 { - cpu-supply = <&vdd_cpu_l>; -}; - -&cpu_l1 { - cpu-supply = <&vdd_cpu_l>; -}; - -&cpu_l2 { - cpu-supply = <&vdd_cpu_l>; -}; - -&cpu_l3 { - cpu-supply = <&vdd_cpu_l>; -}; - -&cpu_b0 { - cpu-supply = <&vdd_cpu_b>; -}; - -&cpu_b1 { - cpu-supply = <&vdd_cpu_b>; -}; - -&emmc_phy { - status = "okay"; -}; - -&gmac { - assigned-clocks = <&cru SCLK_RMII_SRC>; - assigned-clock-parents = <&clkin_gmac>; - clock_in_out = "input"; - phy-supply = <&vcc_lan>; - phy-mode = "rgmii"; - pinctrl-names = "default"; - pinctrl-0 = <&rgmii_pins>; - snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; - snps,reset-active-low; - snps,reset-delays-us = <0 10000 50000>; - tx_delay = <0x28>; - rx_delay = <0x11>; - status = "okay"; -}; - -&gpu { - mali-supply = <&vdd_gpu>; - status = "okay"; -}; - -&hdmi { - avdd-0v9-supply = <&vcca0v9_hdmi>; - avdd-1v8-supply = <&vcca1v8_hdmi>; - ddc-i2c-bus = <&i2c3>; - pinctrl-names = "default"; - pinctrl-0 = <&hdmi_cec>; - status = "okay"; -}; - -&hdmi_sound { - status = "okay"; -}; - -&i2c0 { - clock-frequency = <400000>; - i2c-scl-rising-time-ns = <168>; - i2c-scl-falling-time-ns = <4>; - status = "okay"; - - rk808: pmic@1b { - compatible = "rockchip,rk808"; - reg = <0x1b>; - interrupt-parent = <&gpio1>; - interrupts = <21 IRQ_TYPE_LEVEL_LOW>; - #clock-cells = <1>; - clock-output-names = "xin32k", "rk808-clkout2"; - pinctrl-names = "default"; - pinctrl-0 = <&pmic_int_l>; - rockchip,system-power-controller; - wakeup-source; - - vcc1-supply = <&vcc3v3_sys>; - vcc2-supply = <&vcc3v3_sys>; - vcc3-supply = <&vcc3v3_sys>; - vcc4-supply = <&vcc3v3_sys>; - vcc6-supply = <&vcc3v3_sys>; - vcc7-supply = <&vcc3v3_sys>; - vcc8-supply = <&vcc3v3_sys>; - vcc9-supply = <&vcc3v3_sys>; - vcc10-supply = <&vcc3v3_sys>; - vcc11-supply = <&vcc3v3_sys>; - vcc12-supply = <&vcc3v3_sys>; - vddio-supply = <&vcc_3v0>; - - regulators { - vdd_center: DCDC_REG1 { - regulator-name = "vdd_center"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1350000>; - regulator-ramp-delay = <6001>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_cpu_l: DCDC_REG2 { - regulator-name = "vdd_cpu_l"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1350000>; - regulator-ramp-delay = <6001>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_ddr: DCDC_REG3 { - regulator-name = "vcc_ddr"; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - vcc_1v8: DCDC_REG4 { - regulator-name = "vcc_1v8"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vcca1v8_codec: LDO_REG1 { - regulator-name = "vcca1v8_codec"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcca1v8_hdmi: LDO_REG2 { - regulator-name = "vcca1v8_hdmi"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc1v8_pmu: LDO_REG3 { - regulator-name = "vcc1v8_pmu"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vcc_sdio: LDO_REG4 { - regulator-name = "vcc_sdio"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3000000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3000000>; - }; - }; - - vcca3v0_codec: LDO_REG5 { - regulator-name = "vcca3v0_codec"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_1v5: LDO_REG6 { - regulator-name = "vcc_1v5"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1500000>; - }; - }; - - vcca0v9_hdmi: LDO_REG7 { - regulator-name = "vcca0v9_hdmi"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <900000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_3v0: LDO_REG8 { - regulator-name = "vcc_3v0"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3000000>; - }; - }; - - vcc3v3_s3: vcc_lan: SWITCH_REG1 { - regulator-name = "vcc3v3_s3"; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc3v3_s0: SWITCH_REG2 { - regulator-name = "vcc3v3_s0"; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - }; - }; - - vdd_cpu_b: regulator@40 { - compatible = "silergy,syr827"; - reg = <0x40>; - fcs,suspend-voltage-selector = <1>; - pinctrl-names = "default"; - pinctrl-0 = <&vsel1_pin>; - regulator-name = "vdd_cpu_b"; - regulator-min-microvolt = <712500>; - regulator-max-microvolt = <1500000>; - regulator-ramp-delay = <1000>; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vcc3v3_sys>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_gpu: regulator@41 { - compatible = "silergy,syr828"; - reg = <0x41>; - fcs,suspend-voltage-selector = <1>; - pinctrl-names = "default"; - pinctrl-0 = <&vsel2_pin>; - regulator-name = "vdd_gpu"; - regulator-min-microvolt = <712500>; - regulator-max-microvolt = <1500000>; - regulator-ramp-delay = <1000>; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vcc3v3_sys>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; -}; - -&i2c1 { - i2c-scl-rising-time-ns = <300>; - i2c-scl-falling-time-ns = <15>; - status = "okay"; -}; - -&i2c3 { - i2c-scl-rising-time-ns = <450>; - i2c-scl-falling-time-ns = <15>; - status = "okay"; -}; - -&i2c4 { - i2c-scl-rising-time-ns = <600>; - i2c-scl-falling-time-ns = <20>; - status = "okay"; - - fusb1: usb-typec@22 { - compatible = "fcs,fusb302"; - reg = <0x22>; - interrupt-parent = <&gpio1>; - interrupts = <1 IRQ_TYPE_LEVEL_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&fusb1_int>; - vbus-supply = <&vcc_vbus_typec1>; - status = "okay"; - }; -}; - -&i2c7 { - i2c-scl-rising-time-ns = <600>; - i2c-scl-falling-time-ns = <20>; - status = "okay"; - - fusb0: usb-typec@22 { - compatible = "fcs,fusb302"; - reg = <0x22>; - interrupt-parent = <&gpio1>; - interrupts = <2 IRQ_TYPE_LEVEL_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&fusb0_int>; - vbus-supply = <&vcc_vbus_typec0>; - status = "okay"; - }; - - mp8859: regulator@66 { - compatible = "mps,mp8859"; - reg = <0x66>; - dc_12v: mp8859_dcdc { - regulator-name = "dc_12v"; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vcc_vbus_typec0>; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <12000000>; - }; - }; - }; -}; - -&i2s0 { - rockchip,playback-channels = <8>; - rockchip,capture-channels = <8>; - status = "okay"; -}; - -&i2s1 { - rockchip,playback-channels = <2>; - rockchip,capture-channels = <2>; - status = "okay"; -}; - -&i2s2 { - status = "okay"; -}; - -&io_domains { - audio-supply = <&vcca1v8_codec>; - bt656-supply = <&vcc_3v0>; - gpio1830-supply = <&vcc_3v0>; - sdmmc-supply = <&vcc_sdio>; - status = "okay"; -}; - -&pmu_io_domains { - pmu1830-supply = <&vcc_3v0>; - status = "okay"; -}; - -&pinctrl { - buttons { - pwr_key_l: pwr-key-l { - rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - ir { - ir_int: ir-int { - rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - lcd-panel { - lcd_panel_reset: lcd-panel-reset { - rockchip,pins = <4 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - leds { - diy_led_pin: diy-led-pin { - rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - work_led_pin: work-led-pin { - rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - yellow_led_pin: yellow-led-pin { - rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - pmic { - vsel1_pin: vsel1-pin { - rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>; - }; - - vsel2_pin: vsel2-pin { - rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; - }; - }; - - sdio-pwrseq { - wifi_enable_h: wifi-enable-h { - rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - sdmmc { - vcc3v0_sd_en: vcc3v0-sd-en { - rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - pmic { - pmic_int_l: pmic-int-l { - rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - usb2 { - vcc5v0_host_en: vcc5v0-host-en { - rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - vcc_sys_en: vcc-sys-en { - rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - hub_rst: hub-rst { - rockchip,pins = <2 RK_PA4 RK_FUNC_GPIO &pcfg_output_high>; - }; - }; - - usb-typec { - vcc_vbus_typec1_en: vcc-vbus-typec1-en { - rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - fusb30x { - fusb0_int: fusb0-int { - rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; - }; - - fusb1_int: fusb1-int { - rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; -}; - -&pwm0 { - status = "okay"; -}; - -&pwm2 { - status = "okay"; -}; - -&saradc { - vref-supply = <&vcca1v8_s3>; - status = "okay"; -}; - -&sdmmc { - bus-width = <4>; - cap-sd-highspeed; - cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>; - disable-wp; - max-frequency = <150000000>; - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>; - sd-uhs-sdr104; - vmmc-supply = <&vcc3v0_sd>; - vqmmc-supply = <&vcc_sdio>; - status = "okay"; -}; - -&sdhci { - bus-width = <8>; - non-removable; - status = "okay"; -}; - -&spi1 { - status = "okay"; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <30000000>; - }; -}; - -&tcphy0 { - status = "okay"; -}; - -&tcphy1 { - status = "okay"; -}; - -&tsadc { - /* tshut mode 0:CRU 1:GPIO */ - rockchip,hw-tshut-mode = <1>; - /* tshut polarity 0:LOW 1:HIGH */ - rockchip,hw-tshut-polarity = <1>; - status = "okay"; -}; - -&u2phy0 { - status = "okay"; - - u2phy0_otg: otg-port { - phy-supply = <&vcc_vbus_typec0>; - status = "okay"; - }; - - u2phy0_host: host-port { - phy-supply = <&vcc5v0_host>; - status = "okay"; - }; -}; - -&u2phy1 { - status = "okay"; - - u2phy1_otg: otg-port { - phy-supply = <&vcc_vbus_typec1>; - status = "okay"; - }; - - u2phy1_host: host-port { - phy-supply = <&vcc5v0_host>; - status = "okay"; - }; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_xfer &uart0_cts>; - status = "okay"; -}; - -&uart2 { - status = "okay"; -}; - -&usb_host0_ehci { - status = "okay"; -}; - -&usb_host0_ohci { - status = "okay"; -}; - -&usb_host1_ehci { - status = "okay"; -}; - -&usb_host1_ohci { - status = "okay"; -}; - -&usbdrd3_0 { - status = "okay"; -}; - -&usbdrd_dwc3_0 { - status = "okay"; -}; - -&usbdrd3_1 { - status = "okay"; -}; - -&usbdrd_dwc3_1 { - status = "okay"; - dr_mode = "host"; -}; - -&vopb { - status = "okay"; -}; - -&vopb_mmu { - status = "okay"; -}; - -&vopl { - status = "okay"; -}; - -&vopl_mmu { - status = "okay"; -}; diff --git a/arch/arm/dts/rk3399-rock-4c-plus.dts b/arch/arm/dts/rk3399-rock-4c-plus.dts deleted file mode 100644 index 7baf9d1b22fd..000000000000 --- a/arch/arm/dts/rk3399-rock-4c-plus.dts +++ /dev/null @@ -1,709 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd - * Copyright (c) 2019 Radxa Limited - * Copyright (c) 2022 Amarula Solutions(India) - */ - -/dts-v1/; -#include -#include "rk3399.dtsi" -#include "rk3399-t-opp.dtsi" - -/ { - model = "Radxa ROCK 4C+"; - compatible = "radxa,rock-4c-plus", "rockchip,rk3399"; - - aliases { - ethernet0 = &gmac; - mmc0 = &sdhci; - mmc1 = &sdmmc; - }; - - chosen { - stdout-path = "serial2:1500000n8"; - }; - - clkin_gmac: external-gmac-clock { - compatible = "fixed-clock"; - clock-frequency = <125000000>; - clock-output-names = "clkin_gmac"; - #clock-cells = <0>; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&user_led1 &user_led2>; - - /* USER_LED1 */ - led-0 { - function = LED_FUNCTION_POWER; - color = ; - gpios = <&gpio3 RK_PD4 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-on"; - }; - - /* USER_LED2 */ - led-1 { - function = LED_FUNCTION_STATUS; - color = ; - gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - }; - }; - - sdio_pwrseq: sdio-pwrseq { - compatible = "mmc-pwrseq-simple"; - clocks = <&rk809 1>; - clock-names = "ext_clock"; - pinctrl-names = "default"; - pinctrl-0 = <&wifi_enable_h>; - reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; - }; - - vcc_3v3: vcc-3v3-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc_3v3"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vcc3v3_sys>; - }; - - vcc3v3_phy1: vcc3v3-phy1-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc3v3_phy1"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vcc_3v3>; - }; - - vcc5v0_host1: vcc5v0-host-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio3 RK_PD6 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&vcc5v0_host_en>; - regulator-name = "vcc5v0_host1"; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vcc5v0_host0_s0>; - }; - - vcc5v0_sys: vcc5v0-sys-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc5v0_sys"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; - - vcc5v0_typec: vcc5v0-typec-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&vcc5v0_typec0_en>; - regulator-name = "vcc5v0_typec"; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vcc5v0_sys>; - }; - - vdd_log: vdd-log-regulator { - compatible = "regulator-fixed"; - regulator-name = "vdd_log"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <950000>; - regulator-max-microvolt = <950000>; - vin-supply = <&vcc5v0_sys>; - }; -}; - -&cpu_l0 { - cpu-supply = <&vdd_cpu_l>; -}; - -&cpu_l1 { - cpu-supply = <&vdd_cpu_l>; -}; - -&cpu_l2 { - cpu-supply = <&vdd_cpu_l>; -}; - -&cpu_l3 { - cpu-supply = <&vdd_cpu_l>; -}; - -&cpu_b0 { - cpu-supply = <&vdd_cpu_b>; -}; - -&cpu_b1 { - cpu-supply = <&vdd_cpu_b>; -}; - -&emmc_phy { - status = "okay"; -}; - -&gmac { - assigned-clocks = <&cru SCLK_RMII_SRC>; - assigned-clock-parents = <&clkin_gmac>; - clock_in_out = "input"; - phy-supply = <&vcc3v3_phy1>; - phy-mode = "rgmii"; - pinctrl-names = "default"; - pinctrl-0 = <&rgmii_pins>; - snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; - snps,reset-active-low; - snps,reset-delays-us = <0 10000 50000>; - tx_delay = <0x2a>; - rx_delay = <0x21>; - status = "okay"; -}; - -&gpu { - mali-supply = <&vdd_gpu>; - status = "okay"; -}; - -&hdmi { - avdd-0v9-supply = <&vcc_0v9_s0>; - avdd-1v8-supply = <&vcc_1v8_s0>; - ddc-i2c-bus = <&i2c3>; - pinctrl-names = "default"; - pinctrl-0 = <&hdmi_cec>; - status = "okay"; -}; - -&hdmi_sound { - status = "okay"; -}; - -&i2c0 { - status = "okay"; - i2c-scl-falling-time-ns = <30>; - i2c-scl-rising-time-ns = <180>; - clock-frequency = <400000>; - - rk809: pmic@20 { - compatible = "rockchip,rk809"; - reg = <0x20>; - interrupt-parent = <&gpio1>; - interrupts = ; - #clock-cells = <1>; - clock-output-names = "rk808-clkout1", "rk808-clkout2"; - pinctrl-names = "default"; - pinctrl-0 = <&pmic_int_l>; - rockchip,system-power-controller; - wakeup-source; - - vcc1-supply = <&vcc5v0_sys>; - vcc2-supply = <&vcc5v0_sys>; - vcc3-supply = <&vcc5v0_sys>; - vcc4-supply = <&vcc5v0_sys>; - vcc5-supply = <&vcc_buck5_s3>; - vcc6-supply = <&vcc_buck5_s3>; - vcc7-supply = <&vcc5v0_sys>; - vcc8-supply = <&vcc3v3_sys>; - vcc9-supply = <&vcc5v0_sys>; - - regulators { - vdd_center: DCDC_REG1 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1350000>; - regulator-initial-mode = <0x2>; - regulator-name = "vdd_center"; - regulator-state-mem { - regulator-off-in-suspend; - regulator-suspend-microvolt = <900000>; - }; - }; - - vdd_cpu_l: DCDC_REG2 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1350000>; - regulator-ramp-delay = <6001>; - regulator-initial-mode = <0x2>; - regulator-name = "vdd_cpu_l"; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_ddr: DCDC_REG3 { - regulator-always-on; - regulator-boot-on; - regulator-name = "vcc_ddr"; - regulator-initial-mode = <0x2>; - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - vcc3v3_sys: DCDC_REG4 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-initial-mode = <0x2>; - regulator-name = "vcc3v3_sys"; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vcc_buck5_s3: DCDC_REG5 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc_buck5_s3"; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vcc_0v9_s3: LDO_REG1 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <900000>; - regulator-name = "vcc_0v9_s3"; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_1v8_s3: LDO_REG2 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "vcc_1v8_s3"; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vcc_0v9_s0: LDO_REG3 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <900000>; - regulator-name = "vcc_0v9_s0"; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <900000>; - }; - }; - - vcc_1v8_s0: LDO_REG4 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "vcc_1v8_s0"; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_mipi: LDO_REG5 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "vcc_mipi"; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_1v5_s0: LDO_REG6 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - regulator-name = "vcc_1v5_s0"; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_3v0_s0: LDO_REG7 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "vcc_3v0_s0"; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_sdio_s0: LDO_REG8 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc_sdio_s0"; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_cam: LDO_REG9 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc_cam"; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc5v0_host0_s0: SWITCH_REG1 { - regulator-always-on; - regulator-boot-on; - regulator-name = "vcc5v0_host0_s0"; - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - lcd_3v3: SWITCH_REG2 { - regulator-always-on; - regulator-boot-on; - regulator-name = "lcd_3v3"; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - }; - }; - - vdd_cpu_b: regulator@40 { - compatible = "silergy,syr827"; - reg = <0x40>; - fcs,suspend-voltage-selector = <1>; - regulator-compatible = "fan53555-reg"; - pinctrl-0 = <&vsel1_gpio>; - vsel-gpios = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>; - regulator-name = "vdd_cpu_b"; - regulator-min-microvolt = <712500>; - regulator-max-microvolt = <1500000>; - regulator-ramp-delay = <1000>; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vcc5v0_sys>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_gpu: regulator@41 { - compatible = "silergy,syr828"; - reg = <0x41>; - fcs,suspend-voltage-selector = <1>; - regulator-compatible = "fan53555-reg"; - pinctrl-0 = <&vsel2_gpio>; - vsel-gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_HIGH>; - regulator-name = "vdd_gpu"; - regulator-min-microvolt = <712500>; - regulator-max-microvolt = <1500000>; - regulator-ramp-delay = <1000>; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vcc5v0_sys>; - regulator-initial-mode = <1>; /* 1:force PWM 2:auto */ - regulator-state-mem { - regulator-off-in-suspend; - }; - }; -}; - -&i2c3 { - i2c-scl-rising-time-ns = <450>; - i2c-scl-falling-time-ns = <15>; - status = "okay"; -}; - -&i2s2 { - status = "okay"; -}; - -&io_domains { - audio-supply = <&vcc_1v8_s0>; - bt656-supply = <&vcc_3v0_s0>; - gpio1830-supply = <&vcc_3v0_s0>; - sdmmc-supply = <&vcc_sdio_s0>; - status = "okay"; -}; - -&pinctrl { - bt { - bt_enable_h: bt-enable-h { - rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - bt_host_wake_l: bt-host-wake-l { - rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - bt_wake_l: bt-wake-l { - rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - leds { - user_led1: user-led1 { - rockchip,pins = <3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - user_led2: user-led2 { - rockchip,pins = <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - pmic { - pmic_int_l: pmic-int-l { - rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; - }; - - vsel1_gpio: vsel1-gpio { - rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; - }; - - vsel2_gpio: vsel2-gpio { - rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; - }; - }; - - sdmmc { - sdmmc_bus4: sdmmc-bus4 { - rockchip,pins = <4 8 1 &pcfg_pull_up_8ma>, - <4 9 1 &pcfg_pull_up_8ma>, - <4 10 1 &pcfg_pull_up_8ma>, - <4 11 1 &pcfg_pull_up_8ma>; - }; - - sdmmc_clk: sdmmc-clk { - rockchip,pins = <4 12 1 &pcfg_pull_none_18ma>; - }; - - sdmmc_cmd: sdmmc-cmd { - rockchip,pins = <4 13 1 &pcfg_pull_up_8ma>; - }; - }; - - usb-typec { - vcc5v0_typec0_en: vcc5v0-typec-en { - rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - usb2 { - vcc5v0_host_en: vcc5v0-host-en { - rockchip,pins = <3 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - wifi { - wifi_enable_h: wifi-enable-h { - rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - wifi_host_wake_l: wifi-host-wake-l { - rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; -}; - -&pmu_io_domains { - pmu1830-supply = <&vcc_3v0_s0>; - status = "okay"; -}; - -&saradc { - status = "okay"; - vref-supply = <&vcc_1v8_s3>; -}; - -&sdhci { - max-frequency = <150000000>; - bus-width = <8>; - mmc-hs200-1_8v; - non-removable; - status = "okay"; -}; - -&sdio0 { - #address-cells = <1>; - #size-cells = <0>; - bus-width = <4>; - clock-frequency = <50000000>; - cap-sdio-irq; - cap-sd-highspeed; - keep-power-in-suspend; - mmc-pwrseq = <&sdio_pwrseq>; - non-removable; - pinctrl-names = "default"; - pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>; - sd-uhs-sdr104; - status = "okay"; - - brcmf: wifi@1 { - compatible = "brcm,bcm4329-fmac"; - reg = <1>; - interrupt-parent = <&gpio0>; - interrupts = ; - interrupt-names = "host-wake"; - pinctrl-names = "default"; - pinctrl-0 = <&wifi_host_wake_l>; - }; -}; - -&sdmmc { - bus-width = <4>; - cap-mmc-highspeed; - cap-sd-highspeed; - card-detect-delay = <800>; - disable-wp; - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>; - cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>; - vqmmc-supply = <&vcc_sdio_s0>; - status = "okay"; -}; - -&tcphy0 { - status = "okay"; -}; - -&tcphy1 { - status = "okay"; -}; - -&tsadc { - rockchip,hw-tshut-mode = <1>; - rockchip,hw-tshut-polarity = <1>; - status = "okay"; -}; - -&u2phy0 { - status = "okay"; - - u2phy0_otg: otg-port { - status = "okay"; - }; - - u2phy0_host: host-port { - phy-supply = <&vcc5v0_host1>; - status = "okay"; - }; -}; - -&u2phy1 { - status = "okay"; - - u2phy1_otg: otg-port { - status = "okay"; - }; - - u2phy1_host: host-port { - phy-supply = <&vcc5v0_host1>; - status = "okay"; - }; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; - status = "okay"; - - bluetooth { - compatible = "brcm,bcm4345c5"; - clocks = <&rk809 1>; - clock-names = "lpo"; - device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>; - host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>; - shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>; - max-speed = <1500000>; - pinctrl-names = "default"; - pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>; - vbat-supply = <&vcc3v3_sys>; - vddio-supply = <&vcc_1v8_s3>; - }; -}; - -&uart2 { - status = "okay"; -}; - -&usb_host0_ehci { - status = "okay"; -}; - -&usb_host0_ohci { - status = "okay"; -}; - -&usb_host1_ehci { - status = "okay"; -}; - -&usb_host1_ohci { - status = "okay"; -}; - -&usbdrd3_0 { - extcon = <&u2phy0>; - status = "okay"; -}; - -&usbdrd_dwc3_0 { - status = "okay"; - dr_mode = "host"; -}; - -&usbdrd3_1 { - status = "okay"; -}; - -&usbdrd_dwc3_1 { - status = "okay"; - dr_mode = "host"; -}; - -&vopb { - status = "okay"; -}; - -&vopb_mmu { - status = "okay"; -}; - -&vopl { - status = "okay"; -}; - -&vopl_mmu { - status = "okay"; -}; diff --git a/arch/arm/dts/rk3399-rock-4se.dts b/arch/arm/dts/rk3399-rock-4se.dts deleted file mode 100644 index 7cfc198bbae7..000000000000 --- a/arch/arm/dts/rk3399-rock-4se.dts +++ /dev/null @@ -1,65 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2019 Akash Gajjar - * Copyright (c) 2019 Pragnesh Patel - */ - -/dts-v1/; -#include "rk3399-rock-pi-4.dtsi" -#include "rk3399-t-opp.dtsi" - -/ { - model = "Radxa ROCK 4SE"; - compatible = "radxa,rock-4se", "rockchip,rk3399"; - - aliases { - mmc2 = &sdio0; - }; -}; - -&pinctrl { - usb2 { - vcc5v0_host_en: vcc5v0-host-en { - rockchip,pins = <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; -}; - -&sdio0 { - status = "okay"; - - brcmf: wifi@1 { - compatible = "brcm,bcm4329-fmac"; - reg = <1>; - interrupt-parent = <&gpio0>; - interrupts = ; - interrupt-names = "host-wake"; - pinctrl-names = "default"; - pinctrl-0 = <&wifi_host_wake_l>; - }; -}; - -&uart0 { - status = "okay"; - - bluetooth { - compatible = "brcm,bcm4345c5"; - clocks = <&rk808 1>; - clock-names = "lpo"; - device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>; - host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>; - shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>; - max-speed = <1500000>; - pinctrl-names = "default"; - pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>; - vbat-supply = <&vcc3v3_sys>; - vddio-supply = <&vcc_1v8>; - }; -}; - -&vcc5v0_host { - enable-active-high; - gpio = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&vcc5v0_host_en>; -}; diff --git a/arch/arm/dts/rk3399-rock-pi-4.dtsi b/arch/arm/dts/rk3399-rock-pi-4.dtsi deleted file mode 100644 index 281a12180703..000000000000 --- a/arch/arm/dts/rk3399-rock-pi-4.dtsi +++ /dev/null @@ -1,792 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2019 Akash Gajjar - * Copyright (c) 2019 Pragnesh Patel - */ - -/dts-v1/; -#include -#include -#include -#include "rk3399.dtsi" - -/ { - aliases { - ethernet0 = &gmac; - mmc0 = &sdhci; - mmc1 = &sdmmc; - }; - - chosen { - stdout-path = "serial2:1500000n8"; - }; - - clkin_gmac: external-gmac-clock { - compatible = "fixed-clock"; - clock-frequency = <125000000>; - clock-output-names = "clkin_gmac"; - #clock-cells = <0>; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&user_led2>; - - /* USER_LED2 */ - led-0 { - function = LED_FUNCTION_STATUS; - color = ; - gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - }; - }; - - sdio_pwrseq: sdio-pwrseq { - compatible = "mmc-pwrseq-simple"; - clocks = <&rk808 1>; - clock-names = "lpo"; - pinctrl-names = "default"; - pinctrl-0 = <&wifi_enable_h>; - reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; - }; - - sound: sound { - compatible = "audio-graph-card"; - label = "Analog"; - dais = <&i2s0_p0>; - }; - - sound-dit { - compatible = "audio-graph-card"; - label = "SPDIF"; - dais = <&spdif_p0>; - }; - - spdif-dit { - compatible = "linux,spdif-dit"; - #sound-dai-cells = <0>; - - port { - dit_p0_0: endpoint { - remote-endpoint = <&spdif_p0_0>; - }; - }; - }; - - vbus_typec: vbus-typec-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&vcc5v0_typec_en>; - regulator-name = "vbus_typec"; - regulator-always-on; - vin-supply = <&vcc5v0_sys>; - }; - - vcc12v_dcin: dc-12v { - compatible = "regulator-fixed"; - regulator-name = "vcc12v_dcin"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - }; - - vcc3v3_lan: vcc3v3-lan-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc3v3_lan"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vcc3v3_sys>; - }; - - vcc3v3_pcie: vcc3v3-pcie-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&pcie_pwr_en>; - regulator-name = "vcc3v3_pcie"; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vcc5v0_sys>; - }; - - vcc3v3_sys: vcc3v3-sys { - compatible = "regulator-fixed"; - regulator-name = "vcc3v3_sys"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vcc5v0_sys>; - }; - - vcc5v0_host: vcc5v0-host-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&vcc5v0_host_en>; - regulator-name = "vcc5v0_host"; - regulator-always-on; - vin-supply = <&vcc5v0_sys>; - }; - - vcc5v0_sys: vcc-sys { - compatible = "regulator-fixed"; - regulator-name = "vcc5v0_sys"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vcc12v_dcin>; - }; - - vcc_0v9: vcc-0v9 { - compatible = "regulator-fixed"; - regulator-name = "vcc_0v9"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <900000>; - vin-supply = <&vcc3v3_sys>; - }; - - vdd_log: vdd-log { - compatible = "pwm-regulator"; - pwms = <&pwm2 0 25000 1>; - pwm-supply = <&vcc5v0_sys>; - regulator-name = "vdd_log"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1400000>; - }; -}; - -&cpu_l0 { - cpu-supply = <&vdd_cpu_l>; -}; - -&cpu_l1 { - cpu-supply = <&vdd_cpu_l>; -}; - -&cpu_l2 { - cpu-supply = <&vdd_cpu_l>; -}; - -&cpu_l3 { - cpu-supply = <&vdd_cpu_l>; -}; - -&cpu_b0 { - cpu-supply = <&vdd_cpu_b>; -}; - -&cpu_b1 { - cpu-supply = <&vdd_cpu_b>; -}; - -&emmc_phy { - status = "okay"; -}; - -&gmac { - assigned-clocks = <&cru SCLK_RMII_SRC>; - assigned-clock-parents = <&clkin_gmac>; - clock_in_out = "input"; - phy-supply = <&vcc3v3_lan>; - phy-mode = "rgmii"; - pinctrl-names = "default"; - pinctrl-0 = <&rgmii_pins>; - snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; - snps,reset-active-low; - snps,reset-delays-us = <0 10000 50000>; - tx_delay = <0x28>; - rx_delay = <0x11>; - status = "okay"; -}; - -&gpu { - mali-supply = <&vdd_gpu>; - status = "okay"; -}; - -&hdmi { - avdd-0v9-supply = <&vcca0v9_hdmi>; - avdd-1v8-supply = <&vcca1v8_hdmi>; - ddc-i2c-bus = <&i2c3>; - pinctrl-names = "default"; - pinctrl-0 = <&hdmi_cec>; - status = "okay"; -}; - -&hdmi_sound { - status = "okay"; -}; - -&i2c0 { - clock-frequency = <400000>; - i2c-scl-rising-time-ns = <168>; - i2c-scl-falling-time-ns = <4>; - status = "okay"; - - rk808: pmic@1b { - compatible = "rockchip,rk808"; - reg = <0x1b>; - interrupt-parent = <&gpio1>; - interrupts = <21 IRQ_TYPE_LEVEL_LOW>; - #clock-cells = <1>; - clock-output-names = "xin32k", "rk808-clkout2"; - pinctrl-names = "default"; - pinctrl-0 = <&pmic_int_l>; - rockchip,system-power-controller; - wakeup-source; - - vcc1-supply = <&vcc5v0_sys>; - vcc2-supply = <&vcc5v0_sys>; - vcc3-supply = <&vcc5v0_sys>; - vcc4-supply = <&vcc5v0_sys>; - vcc6-supply = <&vcc5v0_sys>; - vcc7-supply = <&vcc5v0_sys>; - vcc8-supply = <&vcc3v3_sys>; - vcc9-supply = <&vcc5v0_sys>; - vcc10-supply = <&vcc5v0_sys>; - vcc11-supply = <&vcc5v0_sys>; - vcc12-supply = <&vcc3v3_sys>; - vddio-supply = <&vcc_1v8>; - - regulators { - vdd_center: DCDC_REG1 { - regulator-name = "vdd_center"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1350000>; - regulator-ramp-delay = <6001>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_cpu_l: DCDC_REG2 { - regulator-name = "vdd_cpu_l"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1350000>; - regulator-ramp-delay = <6001>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_ddr: DCDC_REG3 { - regulator-name = "vcc_ddr"; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - vcc_1v8: DCDC_REG4 { - regulator-name = "vcc_1v8"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vcca1v8_codec: LDO_REG1 { - regulator-name = "vcca1v8_codec"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcca1v8_hdmi: LDO_REG2 { - regulator-name = "vcca1v8_hdmi"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcca_1v8: LDO_REG3 { - regulator-name = "vcca_1v8"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vcc_sdio: LDO_REG4 { - regulator-name = "vcc_sdio"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3000000>; - }; - }; - - vcca3v0_codec: LDO_REG5 { - regulator-name = "vcca3v0_codec"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_1v5: LDO_REG6 { - regulator-name = "vcc_1v5"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1500000>; - }; - }; - - vcca0v9_hdmi: LDO_REG7 { - regulator-name = "vcca0v9_hdmi"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <900000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_3v0: LDO_REG8 { - regulator-name = "vcc_3v0"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3000000>; - }; - }; - - vcc_cam: SWITCH_REG1 { - regulator-name = "vcc_cam"; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_mipi: SWITCH_REG2 { - regulator-name = "vcc_mipi"; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - }; - }; - - vdd_cpu_b: regulator@40 { - compatible = "silergy,syr827"; - reg = <0x40>; - fcs,suspend-voltage-selector = <1>; - pinctrl-names = "default"; - pinctrl-0 = <&vsel1_pin>; - regulator-name = "vdd_cpu_b"; - regulator-min-microvolt = <712500>; - regulator-max-microvolt = <1500000>; - regulator-ramp-delay = <1000>; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vcc5v0_sys>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_gpu: regulator@41 { - compatible = "silergy,syr828"; - reg = <0x41>; - fcs,suspend-voltage-selector = <1>; - pinctrl-names = "default"; - pinctrl-0 = <&vsel2_pin>; - regulator-name = "vdd_gpu"; - regulator-min-microvolt = <712500>; - regulator-max-microvolt = <1500000>; - regulator-ramp-delay = <1000>; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vcc5v0_sys>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; -}; - -&i2c1 { - i2c-scl-rising-time-ns = <300>; - i2c-scl-falling-time-ns = <15>; - status = "okay"; - - es8316: codec@11 { - compatible = "everest,es8316"; - reg = <0x11>; - clocks = <&cru SCLK_I2S_8CH_OUT>; - clock-names = "mclk"; - #sound-dai-cells = <0>; - - port { - es8316_p0_0: endpoint { - remote-endpoint = <&i2s0_p0_0>; - }; - }; - }; -}; - -&i2c3 { - i2c-scl-rising-time-ns = <450>; - i2c-scl-falling-time-ns = <15>; - status = "okay"; -}; - -&i2c4 { - i2c-scl-rising-time-ns = <600>; - i2c-scl-falling-time-ns = <20>; - status = "okay"; -}; - -&i2s0 { - pinctrl-0 = <&i2s0_2ch_bus>; - pinctrl-1 = <&i2s0_2ch_bus_bclk_off>; - rockchip,capture-channels = <2>; - rockchip,playback-channels = <2>; - status = "okay"; - - i2s0_p0: port { - i2s0_p0_0: endpoint { - dai-format = "i2s"; - mclk-fs = <256>; - remote-endpoint = <&es8316_p0_0>; - }; - }; -}; - -&i2s1 { - rockchip,playback-channels = <2>; - rockchip,capture-channels = <2>; -}; - -&i2s2 { - status = "okay"; -}; - -&io_domains { - audio-supply = <&vcca1v8_codec>; - bt656-supply = <&vcc_3v0>; - gpio1830-supply = <&vcc_3v0>; - sdmmc-supply = <&vcc_sdio>; - status = "okay"; -}; - -&pcie0 { - ep-gpios = <&gpio4 RK_PD3 GPIO_ACTIVE_HIGH>; - num-lanes = <4>; - pinctrl-0 = <&pcie_clkreqnb_cpm>; - pinctrl-names = "default"; - vpcie0v9-supply = <&vcc_0v9>; - vpcie1v8-supply = <&vcc_1v8>; - vpcie3v3-supply = <&vcc3v3_pcie>; - status = "okay"; -}; - -&pcie_phy { - status = "okay"; -}; - -&pinctrl { - bt { - bt_enable_h: bt-enable-h { - rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - bt_host_wake_l: bt-host-wake-l { - rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - bt_wake_l: bt-wake-l { - rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - es8316 { - hp_detect: hp-detect { - rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - hp_int: hp-int { - rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - leds { - user_led2: user-led2 { - rockchip,pins = <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - pcie { - pcie_pwr_en: pcie-pwr-en { - rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - pmic { - pmic_int_l: pmic-int-l { - rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; - }; - - vsel1_pin: vsel1-pin { - rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; - }; - - vsel2_pin: vsel2-pin { - rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; - }; - }; - - sdio0 { - sdio0_bus4: sdio0-bus4 { - rockchip,pins = <2 RK_PC4 1 &pcfg_pull_up_20ma>, - <2 RK_PC5 1 &pcfg_pull_up_20ma>, - <2 RK_PC6 1 &pcfg_pull_up_20ma>, - <2 RK_PC7 1 &pcfg_pull_up_20ma>; - }; - - sdio0_cmd: sdio0-cmd { - rockchip,pins = <2 RK_PD0 1 &pcfg_pull_up_20ma>; - }; - - sdio0_clk: sdio0-clk { - rockchip,pins = <2 RK_PD1 1 &pcfg_pull_none_20ma>; - }; - }; - - usb-typec { - vcc5v0_typec_en: vcc5v0-typec-en { - rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - usb2 { - vcc5v0_host_en: vcc5v0-host-en { - rockchip,pins = <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - wifi { - wifi_enable_h: wifi-enable-h { - rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - wifi_host_wake_l: wifi-host-wake-l { - rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; -}; - -&pmu_io_domains { - pmu1830-supply = <&vcc_3v0>; - status = "okay"; -}; - -&pwm2 { - status = "okay"; -}; - -&saradc { - status = "okay"; - - vref-supply = <&vcc_1v8>; -}; - -&sdhci { - max-frequency = <150000000>; - bus-width = <8>; - mmc-hs200-1_8v; - non-removable; - status = "okay"; -}; - -&sdio0 { - #address-cells = <1>; - #size-cells = <0>; - bus-width = <4>; - clock-frequency = <50000000>; - cap-sdio-irq; - cap-sd-highspeed; - keep-power-in-suspend; - mmc-pwrseq = <&sdio_pwrseq>; - non-removable; - pinctrl-names = "default"; - pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>; - sd-uhs-sdr104; -}; - -&sdmmc { - bus-width = <4>; - cap-mmc-highspeed; - cap-sd-highspeed; - cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>; - disable-wp; - max-frequency = <150000000>; - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc_clk &sdmmc_cd &sdmmc_cmd &sdmmc_bus4>; - status = "okay"; -}; - -&spdif { - - spdif_p0: port { - spdif_p0_0: endpoint { - remote-endpoint = <&dit_p0_0>; - }; - }; -}; - -&tcphy0 { - status = "okay"; -}; - -&tcphy1 { - status = "okay"; -}; - -&tsadc { - status = "okay"; - - /* tshut mode 0:CRU 1:GPIO */ - rockchip,hw-tshut-mode = <1>; - /* tshut polarity 0:LOW 1:HIGH */ - rockchip,hw-tshut-polarity = <1>; -}; - -&u2phy0 { - status = "okay"; - - u2phy0_otg: otg-port { - status = "okay"; - }; - - u2phy0_host: host-port { - phy-supply = <&vcc5v0_host>; - status = "okay"; - }; -}; - -&u2phy1 { - status = "okay"; - - u2phy1_otg: otg-port { - status = "okay"; - }; - - u2phy1_host: host-port { - phy-supply = <&vcc5v0_host>; - status = "okay"; - }; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; -}; - -&uart2 { - status = "okay"; -}; - -&usb_host0_ehci { - status = "okay"; -}; - -&usb_host0_ohci { - status = "okay"; -}; - -&usb_host1_ehci { - status = "okay"; -}; - -&usb_host1_ohci { - status = "okay"; -}; - -&usbdrd3_0 { - status = "okay"; -}; - -&usbdrd3_1 { - status = "okay"; -}; - -&usbdrd_dwc3_0 { - status = "okay"; - dr_mode = "host"; -}; - -&usbdrd_dwc3_1 { - status = "okay"; - dr_mode = "host"; -}; - -&vopb { - status = "okay"; -}; - -&vopb_mmu { - status = "okay"; -}; - -&vopl { - status = "okay"; -}; - -&vopl_mmu { - status = "okay"; -}; diff --git a/arch/arm/dts/rk3399-rock-pi-4a.dts b/arch/arm/dts/rk3399-rock-pi-4a.dts deleted file mode 100644 index d5df8939a658..000000000000 --- a/arch/arm/dts/rk3399-rock-pi-4a.dts +++ /dev/null @@ -1,24 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2019 Akash Gajjar - * Copyright (c) 2019 Pragnesh Patel - */ - -/dts-v1/; -#include "rk3399-rock-pi-4.dtsi" -#include "rk3399-opp.dtsi" - -/ { - model = "Radxa ROCK Pi 4A"; - compatible = "radxa,rockpi4a", "radxa,rockpi4", "rockchip,rk3399"; -}; - -&spi1 { - status = "okay"; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - }; -}; diff --git a/arch/arm/dts/rk3399-rock-pi-4c.dts b/arch/arm/dts/rk3399-rock-pi-4c.dts deleted file mode 100644 index de2ebe4cb4f3..000000000000 --- a/arch/arm/dts/rk3399-rock-pi-4c.dts +++ /dev/null @@ -1,80 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd - * Copyright (c) 2019 Radxa Limited - * Copyright (c) 2019 Amarula Solutions(India) - */ - -/dts-v1/; -#include "rk3399-rock-pi-4.dtsi" -#include "rk3399-opp.dtsi" - -/ { - model = "Radxa ROCK Pi 4C"; - compatible = "radxa,rockpi4c", "radxa,rockpi4", "rockchip,rk3399"; - - aliases { - mmc2 = &sdio0; - }; -}; - -&es8316 { - pinctrl-0 = <&hp_detect &hp_int>; - pinctrl-names = "default"; - interrupt-parent = <&gpio1>; - interrupts = ; -}; - -&sdio0 { - status = "okay"; - - brcmf: wifi@1 { - compatible = "brcm,bcm4329-fmac"; - reg = <1>; - interrupt-parent = <&gpio0>; - interrupts = ; - interrupt-names = "host-wake"; - pinctrl-names = "default"; - pinctrl-0 = <&wifi_host_wake_l>; - }; -}; - -&sound { - hp-det-gpio = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>; -}; - -&spi1 { - status = "okay"; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - }; -}; - -&uart0 { - status = "okay"; - - bluetooth { - compatible = "brcm,bcm4345c5"; - clocks = <&rk808 1>; - clock-names = "lpo"; - device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>; - host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>; - shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>; - max-speed = <1500000>; - pinctrl-names = "default"; - pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>; - vbat-supply = <&vcc3v3_sys>; - vddio-supply = <&vcc_1v8>; - }; -}; - -&vcc5v0_host { - gpio = <&gpio3 RK_PD6 GPIO_ACTIVE_HIGH>; -}; - -&vcc5v0_host_en { - rockchip,pins = <3 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>; -}; diff --git a/arch/arm/dts/rk3399-rock960.dts b/arch/arm/dts/rk3399-rock960.dts deleted file mode 100644 index 1a23e8f3cdf6..000000000000 --- a/arch/arm/dts/rk3399-rock960.dts +++ /dev/null @@ -1,156 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2018 Linaro Ltd. - */ - -/dts-v1/; -#include "rk3399-rock960.dtsi" - -/ { - model = "96boards Rock960"; - compatible = "vamrs,rock960", "rockchip,rk3399"; - - chosen { - stdout-path = "serial2:1500000n8"; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&user_led1_pin>, <&user_led2_pin>, - <&user_led3_pin>, <&user_led4_pin>, - <&wlan_led_pin>, <&bt_led_pin>; - - user_led1: led-1 { - label = "green:user1"; - gpios = <&gpio4 RK_PC2 0>; - linux,default-trigger = "heartbeat"; - }; - - user_led2: led-2 { - label = "green:user2"; - gpios = <&gpio4 RK_PC6 0>; - linux,default-trigger = "mmc0"; - }; - - user_led3: led-3 { - label = "green:user3"; - gpios = <&gpio4 RK_PD0 0>; - linux,default-trigger = "mmc1"; - }; - - user_led4: led-4 { - label = "green:user4"; - gpios = <&gpio4 RK_PD4 0>; - panic-indicator; - linux,default-trigger = "none"; - }; - - wlan_active_led: led-5 { - label = "yellow:wlan"; - gpios = <&gpio4 RK_PD5 0>; - linux,default-trigger = "phy0tx"; - default-state = "off"; - }; - - bt_active_led: led-6 { - label = "blue:bt"; - gpios = <&gpio4 RK_PD6 0>; - linux,default-trigger = "hci0-power"; - default-state = "off"; - }; - }; - -}; - -&cpu_alert0 { - temperature = <65000>; -}; - -&cpu_thermal { - sustainable-power = <1550>; - - cooling-maps { - map0 { - trip = <&cpu_alert1>; - }; - }; -}; - -&pcie0 { - ep-gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_HIGH>; -}; - -&pinctrl { - leds { - user_led1_pin: user-led1-pin { - rockchip,pins = - <4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - user_led2_pin: user-led2-pin { - rockchip,pins = - <4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - user_led3_pin: user-led3-pin { - rockchip,pins = - <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - user_led4_pin: user-led4-pin { - rockchip,pins = - <4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - wlan_led_pin: wlan-led-pin { - rockchip,pins = - <4 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - bt_led_pin: bt-led-pin { - rockchip,pins = - <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - pcie { - pcie_drv: pcie-drv { - rockchip,pins = - <2 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - usb2 { - host_vbus_drv: host-vbus-drv { - rockchip,pins = - <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; -}; - -&spi0 { - /* On Low speed expansion (LS-SPI0) */ - status = "okay"; -}; - -&spi4 { - /* On High speed expansion (HS-SPI1) */ - status = "okay"; -}; - -&usbdrd_dwc3_0 { - dr_mode = "otg"; -}; - -&usbdrd_dwc3_1 { - dr_mode = "host"; -}; - -&vcc3v3_pcie { - gpio = <&gpio2 5 GPIO_ACTIVE_HIGH>; -}; - -&vcc5v0_host { - gpio = <&gpio4 25 GPIO_ACTIVE_HIGH>; -}; diff --git a/arch/arm/dts/rk3399-rock960.dtsi b/arch/arm/dts/rk3399-rock960.dtsi deleted file mode 100644 index c920ddf44baf..000000000000 --- a/arch/arm/dts/rk3399-rock960.dtsi +++ /dev/null @@ -1,673 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2018 Collabora Ltd. - * Copyright (c) 2018 Fuzhou Rockchip Electronics Co., Ltd. - * Copyright (c) 2018 Linaro Ltd. - */ - -#include "rk3399.dtsi" -#include "rk3399-opp.dtsi" -#include - -/ { - aliases { - mmc0 = &sdio0; - mmc1 = &sdmmc; - mmc2 = &sdhci; - }; - - sdio_pwrseq: sdio-pwrseq { - compatible = "mmc-pwrseq-simple"; - clocks = <&rk808 1>; - clock-names = "ext_clock"; - pinctrl-names = "default"; - pinctrl-0 = <&wifi_enable_h>; - reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; - }; - - vcc12v_dcin: vcc12v-dcin { - compatible = "regulator-fixed"; - regulator-name = "vcc12v_dcin"; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - regulator-always-on; - regulator-boot-on; - }; - - vcc1v8_s0: vcc1v8-s0 { - compatible = "regulator-fixed"; - regulator-name = "vcc1v8_s0"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - vcc5v0_sys: vcc5v0-sys { - compatible = "regulator-fixed"; - regulator-name = "vcc5v0_sys"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - vin-supply = <&vcc12v_dcin>; - }; - - vcc3v3_sys: vcc3v3-sys { - compatible = "regulator-fixed"; - regulator-name = "vcc3v3_sys"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - vin-supply = <&vcc5v0_sys>; - }; - - vcc3v3_pcie: vcc3v3-pcie-regulator { - compatible = "regulator-fixed"; - enable-active-high; - pinctrl-names = "default"; - pinctrl-0 = <&pcie_drv>; - regulator-boot-on; - regulator-name = "vcc3v3_pcie"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vcc3v3_sys>; - }; - - vcc5v0_host: vcc5v0-host-regulator { - compatible = "regulator-fixed"; - enable-active-high; - pinctrl-names = "default"; - pinctrl-0 = <&host_vbus_drv>; - regulator-name = "vcc5v0_host"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - vin-supply = <&vcc5v0_sys>; - }; - - vcc_0v9: vcc-0v9 { - compatible = "regulator-fixed"; - regulator-name = "vcc_0v9"; - regulator-always-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <900000>; - vin-supply = <&vcc3v3_sys>; - }; -}; - -&cpu_l0 { - cpu-supply = <&vdd_cpu_l>; -}; - -&cpu_l1 { - cpu-supply = <&vdd_cpu_l>; -}; - -&cpu_l2 { - cpu-supply = <&vdd_cpu_l>; -}; - -&cpu_l3 { - cpu-supply = <&vdd_cpu_l>; -}; - -&cpu_b0 { - cpu-supply = <&vdd_cpu_b>; -}; - -&cpu_b1 { - cpu-supply = <&vdd_cpu_b>; -}; - -&emmc_phy { - status = "okay"; -}; - -&gpu { - mali-supply = <&vdd_gpu>; - status = "okay"; -}; - -&hdmi { - avdd-0v9-supply = <&vcca0v9_hdmi>; - avdd-1v8-supply = <&vcca1v8_hdmi>; - ddc-i2c-bus = <&i2c3>; - pinctrl-names = "default"; - pinctrl-0 = <&hdmi_cec>; - status = "okay"; -}; - -&hdmi_sound { - status = "okay"; -}; - -&i2c0 { - clock-frequency = <400000>; - i2c-scl-rising-time-ns = <168>; - i2c-scl-falling-time-ns = <4>; - status = "okay"; - - vdd_cpu_b: regulator@40 { - compatible = "silergy,syr827"; - reg = <0x40>; - fcs,suspend-voltage-selector = <1>; - regulator-name = "vdd_cpu_b"; - regulator-min-microvolt = <712500>; - regulator-max-microvolt = <1500000>; - regulator-ramp-delay = <1000>; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vcc5v0_sys>; - status = "okay"; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_gpu: regulator@41 { - compatible = "silergy,syr828"; - reg = <0x41>; - fcs,suspend-voltage-selector = <1>; - regulator-name = "vdd_gpu"; - regulator-min-microvolt = <712500>; - regulator-max-microvolt = <1500000>; - regulator-ramp-delay = <1000>; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vcc5v0_sys>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - rk808: pmic@1b { - compatible = "rockchip,rk808"; - reg = <0x1b>; - interrupt-parent = <&gpio1>; - interrupts = <21 IRQ_TYPE_LEVEL_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&pmic_int_l>; - rockchip,system-power-controller; - wakeup-source; - #clock-cells = <1>; - clock-output-names = "xin32k", "rk808-clkout2"; - - vcc1-supply = <&vcc5v0_sys>; - vcc2-supply = <&vcc5v0_sys>; - vcc3-supply = <&vcc5v0_sys>; - vcc4-supply = <&vcc5v0_sys>; - vcc6-supply = <&vcc5v0_sys>; - vcc7-supply = <&vcc5v0_sys>; - vcc8-supply = <&vcc3v3_sys>; - vcc9-supply = <&vcc5v0_sys>; - vcc10-supply = <&vcc5v0_sys>; - vcc11-supply = <&vcc5v0_sys>; - vcc12-supply = <&vcc3v3_sys>; - vddio-supply = <&vcc_1v8>; - - regulators { - vdd_center: DCDC_REG1 { - regulator-name = "vdd_center"; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_cpu_l: DCDC_REG2 { - regulator-name = "vdd_cpu_l"; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_ddr: DCDC_REG3 { - regulator-name = "vcc_ddr"; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - vcc_1v8: DCDC_REG4 { - regulator-name = "vcc_1v8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vcc1v8_dvp: LDO_REG1 { - regulator-name = "vcc1v8_dvp"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vcca1v8_hdmi: LDO_REG2 { - regulator-name = "vcca1v8_hdmi"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vcca_1v8: LDO_REG3 { - regulator-name = "vcca_1v8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vcc_sd: LDO_REG4 { - regulator-name = "vcc_sd"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vcc3v0_sd: LDO_REG5 { - regulator-name = "vcc3v0_sd"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3000000>; - }; - }; - - vcc_1v5: LDO_REG6 { - regulator-name = "vcc_1v5"; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1500000>; - }; - }; - - vcca0v9_hdmi: LDO_REG7 { - regulator-name = "vcca0v9_hdmi"; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <900000>; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <900000>; - }; - }; - - vcc_3v0: LDO_REG8 { - regulator-name = "vcc_3v0"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3000000>; - }; - }; - - vcc3v3_s3: SWITCH_REG1 { - regulator-name = "vcc3v3_s3"; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - vcc3v3_s0: SWITCH_REG2 { - regulator-name = "vcc3v3_s0"; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - }; - }; -}; - -&i2c1 { - status = "okay"; -}; - -&i2c2 { - status = "okay"; -}; - -&i2c3 { - status = "okay"; -}; - -&i2c4 { - status = "okay"; -}; - -&i2s2 { - status = "okay"; -}; - -&io_domains { - bt656-supply = <&vcc1v8_s0>; /* bt656_gpio2ab_ms */ - audio-supply = <&vcc1v8_s0>; /* audio_gpio3d4a_ms */ - sdmmc-supply = <&vcc_sd>; /* sdmmc_gpio4b_ms */ - gpio1830-supply = <&vcc_3v0>; /* gpio1833_gpio4cd_ms */ - status = "okay"; -}; - -&pcie_phy { - status = "okay"; -}; - -&pcie0 { - num-lanes = <4>; - pinctrl-names = "default"; - pinctrl-0 = <&pcie_clkreqn_cpm>; - vpcie0v9-supply = <&vcc_0v9>; - vpcie1v8-supply = <&vcca_1v8>; - vpcie3v3-supply = <&vcc3v3_pcie>; - status = "okay"; -}; - -&pmu_io_domains { - pmu1830-supply = <&vcc_1v8>; - status = "okay"; -}; - -&pinctrl { - bt { - bt_enable_h: bt-enable-h { - rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - bt_host_wake_l: bt-host-wake-l { - rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - bt_wake_l: bt-wake-l { - rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - sdmmc { - sdmmc_bus1: sdmmc-bus1 { - rockchip,pins = - <4 RK_PB0 1 &pcfg_pull_up_8ma>; - }; - - sdmmc_bus4: sdmmc-bus4 { - rockchip,pins = - <4 RK_PB0 1 &pcfg_pull_up_8ma>, - <4 RK_PB1 1 &pcfg_pull_up_8ma>, - <4 RK_PB2 1 &pcfg_pull_up_8ma>, - <4 RK_PB3 1 &pcfg_pull_up_8ma>; - }; - - sdmmc_clk: sdmmc-clk { - rockchip,pins = - <4 RK_PB4 1 &pcfg_pull_none_18ma>; - }; - - sdmmc_cmd: sdmmc-cmd { - rockchip,pins = - <4 RK_PB5 1 &pcfg_pull_up_8ma>; - }; - }; - - sdio0 { - sdio0_bus4: sdio0-bus4 { - rockchip,pins = - <2 RK_PC4 1 &pcfg_pull_up_20ma>, - <2 RK_PC5 1 &pcfg_pull_up_20ma>, - <2 RK_PC6 1 &pcfg_pull_up_20ma>, - <2 RK_PC7 1 &pcfg_pull_up_20ma>; - }; - - sdio0_cmd: sdio0-cmd { - rockchip,pins = - <2 RK_PD0 1 &pcfg_pull_up_20ma>; - }; - - sdio0_clk: sdio0-clk { - rockchip,pins = - <2 RK_PD1 1 &pcfg_pull_none_20ma>; - }; - }; - - pmic { - pmic_int_l: pmic-int-l { - rockchip,pins = - <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; - }; - - vsel1_pin: vsel1-pin { - rockchip,pins = - <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; - }; - - vsel2_pin: vsel2-pin { - rockchip,pins = - <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; - }; - }; - - sdio-pwrseq { - wifi_enable_h: wifi-enable-h { - rockchip,pins = - <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - wifi { - wifi_host_wake_l: wifi-host-wake-l { - rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; -}; - -&pwm2 { - status = "okay"; -}; - -&pwm3 { - status = "okay"; -}; - -&sdio0 { - bus-width = <4>; - clock-frequency = <50000000>; - cap-sdio-irq; - cap-sd-highspeed; - keep-power-in-suspend; - mmc-pwrseq = <&sdio_pwrseq>; - non-removable; - pinctrl-names = "default"; - pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>; - sd-uhs-sdr104; - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - brcmf: wifi@1 { - compatible = "brcm,bcm4329-fmac"; - reg = <1>; - interrupt-parent = <&gpio0>; - interrupts = ; - interrupt-names = "host-wake"; - pinctrl-names = "default"; - pinctrl-0 = <&wifi_host_wake_l>; - }; -}; - -&sdhci { - bus-width = <8>; - mmc-hs400-1_8v; - mmc-hs400-enhanced-strobe; - non-removable; - status = "okay"; -}; - -&sdmmc { - bus-width = <4>; - cap-mmc-highspeed; - cap-sd-highspeed; - clock-frequency = <100000000>; - max-frequency = <100000000>; - cd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; - disable-wp; - sd-uhs-sdr104; - vqmmc-supply = <&vcc_sd>; - card-detect-delay = <800>; - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; - status = "okay"; -}; - -&tsadc { - rockchip,hw-tshut-mode = <1>; - rockchip,hw-tshut-polarity = <1>; - rockchip,hw-tshut-temp = <110000>; - status = "okay"; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; - status = "okay"; - - bluetooth { - compatible = "brcm,bcm43438-bt"; - clocks = <&rk808 1>; - clock-names = "ext_clock"; - device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>; - host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>; - shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>; - }; -}; - -&uart2 { - status = "okay"; -}; - -&tcphy0 { - status = "okay"; -}; - -&tcphy1 { - status = "okay"; -}; - -&u2phy0 { - status = "okay"; -}; - -&u2phy1 { - status = "okay"; -}; - -&u2phy0_host { - phy-supply = <&vcc5v0_host>; - status = "okay"; -}; - -&u2phy1_host { - phy-supply = <&vcc5v0_host>; - status = "okay"; -}; - -&u2phy0_otg { - status = "okay"; -}; - -&u2phy1_otg { - status = "okay"; -}; - -&usb_host0_ehci { - status = "okay"; -}; - -&usb_host0_ohci { - status = "okay"; -}; - -&usb_host1_ehci { - status = "okay"; -}; - -&usb_host1_ohci { - status = "okay"; -}; - -&usbdrd3_0 { - status = "okay"; -}; - -&usbdrd_dwc3_0 { - status = "okay"; -}; - -&usbdrd3_1 { - status = "okay"; -}; - -&usbdrd_dwc3_1 { - status = "okay"; -}; - -&vopb { - status = "okay"; -}; - -&vopb_mmu { - status = "okay"; -}; - -&vopl { - status = "okay"; -}; - -&vopl_mmu { - status = "okay"; -}; diff --git a/arch/arm/dts/rk3399-rockpro64.dts b/arch/arm/dts/rk3399-rockpro64.dts deleted file mode 100644 index 4b42717800f7..000000000000 --- a/arch/arm/dts/rk3399-rockpro64.dts +++ /dev/null @@ -1,30 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd. - * Copyright (c) 2018 Akash Gajjar - * Copyright (c) 2019 Katsuhiro Suzuki - */ - -/dts-v1/; -#include "rk3399-rockpro64.dtsi" - -/ { - model = "Pine64 RockPro64 v2.1"; - compatible = "pine64,rockpro64-v2.1", "pine64,rockpro64", "rockchip,rk3399"; -}; - -&i2c1 { - es8316: codec@11 { - compatible = "everest,es8316"; - reg = <0x11>; - clocks = <&cru SCLK_I2S_8CH_OUT>; - clock-names = "mclk"; - #sound-dai-cells = <0>; - - port { - es8316_p0_0: endpoint { - remote-endpoint = <&i2s1_p0_0>; - }; - }; - }; -}; diff --git a/arch/arm/dts/rk3399-rockpro64.dtsi b/arch/arm/dts/rk3399-rockpro64.dtsi deleted file mode 100644 index f30b82a10ca3..000000000000 --- a/arch/arm/dts/rk3399-rockpro64.dtsi +++ /dev/null @@ -1,956 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd. - * Copyright (c) 2018 Akash Gajjar - */ - -#include -#include -#include "rk3399.dtsi" -#include "rk3399-opp.dtsi" - -/ { - aliases { - ethernet0 = &gmac; - mmc0 = &sdio0; - mmc1 = &sdmmc; - mmc2 = &sdhci; - }; - - chosen { - stdout-path = "serial2:1500000n8"; - }; - - /* enable for panel backlight support */ - backlight: backlight { - compatible = "pwm-backlight"; - brightness-levels = <0 4 8 16 32 64 128 255>; - default-brightness-level = <5>; - pwms = <&pwm0 0 1000000 0>; - status = "disabled"; - }; - - clkin_gmac: external-gmac-clock { - compatible = "fixed-clock"; - clock-frequency = <125000000>; - clock-output-names = "clkin_gmac"; - #clock-cells = <0>; - }; - - gpio-keys { - compatible = "gpio-keys"; - autorepeat; - pinctrl-names = "default"; - pinctrl-0 = <&pwrbtn>; - - key-power { - debounce-interval = <100>; - gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; - label = "GPIO Key Power"; - linux,code = ; - wakeup-source; - }; - }; - - ir-receiver { - compatible = "gpio-ir-receiver"; - gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>; - pinctrl-0 = <&ir_int>; - pinctrl-names = "default"; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&work_led_pin>, <&diy_led_pin>; - - work_led: led-0 { - label = "work"; - default-state = "on"; - gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>; - }; - - diy_led: led-1 { - label = "diy"; - default-state = "off"; - gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>; - }; - }; - - fan: pwm-fan { - compatible = "pwm-fan"; - cooling-levels = <0 100 150 200 255>; - #cooling-cells = <2>; - fan-supply = <&vcc12v_dcin>; - pwms = <&pwm1 0 50000 0>; - }; - - sdio_pwrseq: sdio-pwrseq { - compatible = "mmc-pwrseq-simple"; - clocks = <&rk808 1>; - clock-names = "ext_clock"; - pinctrl-names = "default"; - pinctrl-0 = <&wifi_enable_h>; - reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; - }; - - sound { - compatible = "audio-graph-card"; - label = "Analog"; - dais = <&i2s1_p0>; - }; - - sound-dit { - compatible = "audio-graph-card"; - label = "SPDIF"; - dais = <&spdif_p0>; - }; - - spdif-dit { - compatible = "linux,spdif-dit"; - #sound-dai-cells = <0>; - - port { - dit_p0_0: endpoint { - remote-endpoint = <&spdif_p0_0>; - }; - }; - }; - - avdd: avdd-regulator { - compatible = "regulator-fixed"; - regulator-name = "avdd"; - regulator-min-microvolt = <11000000>; - regulator-max-microvolt = <11000000>; - vin-supply = <&vcc3v3_s0>; - }; - - vcc12v_dcin: vcc12v-dcin { - compatible = "regulator-fixed"; - regulator-name = "vcc12v_dcin"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - }; - - /* switched by pmic_sleep */ - vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 { - compatible = "regulator-fixed"; - regulator-name = "vcc1v8_s3"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vcc_1v8>; - }; - - /* micro SD card power */ - vcc3v0_sd: vcc3v0-sd { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc0_pwr_h>; - regulator-name = "vcc3v0_sd"; - regulator-always-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - vin-supply = <&vcc3v3_sys>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc3v3_pcie: vcc3v3-pcie-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&pcie_pwr_en>; - regulator-name = "vcc3v3_pcie"; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vcc12v_dcin>; - }; - - vcc3v3_sys: vcc3v3-sys { - compatible = "regulator-fixed"; - regulator-name = "vcc3v3_sys"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vcc5v0_sys>; - }; - - /* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */ - vcc5v0_host: vcc5v0-host-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&vcc5v0_host_en>; - regulator-name = "vcc5v0_host"; - regulator-always-on; - vin-supply = <&vcc5v0_usb>; - }; - - vcc5v0_typec: vcc5v0-typec-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&vcc5v0_typec_en>; - regulator-name = "vcc5v0_typec"; - regulator-always-on; - vin-supply = <&vcc5v0_usb>; - }; - - vcc5v0_sys: vcc5v0-sys { - compatible = "regulator-fixed"; - regulator-name = "vcc5v0_sys"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vcc12v_dcin>; - }; - - vcc5v0_usb: vcc5v0-usb { - compatible = "regulator-fixed"; - regulator-name = "vcc5v0_usb"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vcc12v_dcin>; - }; - - vdd_log: vdd-log { - compatible = "pwm-regulator"; - pwms = <&pwm2 0 25000 1>; - pwm-supply = <&vcc5v0_sys>; - regulator-name = "vdd_log"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1700000>; - }; -}; - -&cpu_l0 { - cpu-supply = <&vdd_cpu_l>; -}; - -&cpu_l1 { - cpu-supply = <&vdd_cpu_l>; -}; - -&cpu_l2 { - cpu-supply = <&vdd_cpu_l>; -}; - -&cpu_l3 { - cpu-supply = <&vdd_cpu_l>; -}; - -&cpu_b0 { - cpu-supply = <&vdd_cpu_b>; -}; - -&cpu_b1 { - cpu-supply = <&vdd_cpu_b>; -}; - -&cpu_thermal { - trips { - cpu_warm: cpu_warm { - temperature = <55000>; - hysteresis = <2000>; - type = "active"; - }; - - cpu_hot: cpu_hot { - temperature = <65000>; - hysteresis = <2000>; - type = "active"; - }; - }; - - cooling-maps { - map2 { - trip = <&cpu_warm>; - cooling-device = <&fan THERMAL_NO_LIMIT 1>; - }; - - map3 { - trip = <&cpu_hot>; - cooling-device = <&fan 2 THERMAL_NO_LIMIT>; - }; - }; -}; - -&emmc_phy { - status = "okay"; -}; - -&gmac { - assigned-clocks = <&cru SCLK_RMII_SRC>; - assigned-clock-parents = <&clkin_gmac>; - clock_in_out = "input"; - phy-supply = <&vcc_lan>; - phy-mode = "rgmii"; - pinctrl-names = "default"; - pinctrl-0 = <&rgmii_pins>; - snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; - snps,reset-active-low; - snps,reset-delays-us = <0 10000 50000>; - tx_delay = <0x28>; - rx_delay = <0x11>; - status = "okay"; -}; - -&hdmi { - ddc-i2c-bus = <&i2c3>; - pinctrl-names = "default"; - pinctrl-0 = <&hdmi_cec>; - status = "okay"; -}; - -&hdmi_sound { - status = "okay"; -}; - -&gpu { - mali-supply = <&vdd_gpu>; - status = "okay"; -}; - -&i2c0 { - clock-frequency = <400000>; - i2c-scl-rising-time-ns = <168>; - i2c-scl-falling-time-ns = <4>; - status = "okay"; - - rk808: pmic@1b { - compatible = "rockchip,rk808"; - reg = <0x1b>; - interrupt-parent = <&gpio3>; - interrupts = <10 IRQ_TYPE_LEVEL_LOW>; - #clock-cells = <1>; - clock-output-names = "xin32k", "rk808-clkout2"; - pinctrl-names = "default"; - pinctrl-0 = <&pmic_int_l>; - rockchip,system-power-controller; - wakeup-source; - - vcc1-supply = <&vcc5v0_sys>; - vcc2-supply = <&vcc5v0_sys>; - vcc3-supply = <&vcc5v0_sys>; - vcc4-supply = <&vcc5v0_sys>; - vcc6-supply = <&vcc5v0_sys>; - vcc7-supply = <&vcc5v0_sys>; - vcc8-supply = <&vcc3v3_sys>; - vcc9-supply = <&vcc5v0_sys>; - vcc10-supply = <&vcc5v0_sys>; - vcc11-supply = <&vcc5v0_sys>; - vcc12-supply = <&vcc3v3_sys>; - vddio-supply = <&vcca_1v8>; - - regulators { - vdd_center: DCDC_REG1 { - regulator-name = "vdd_center"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1350000>; - regulator-ramp-delay = <6001>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_cpu_l: DCDC_REG2 { - regulator-name = "vdd_cpu_l"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1350000>; - regulator-ramp-delay = <6001>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_ddr: DCDC_REG3 { - regulator-name = "vcc_ddr"; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - vcc_1v8: DCDC_REG4 { - regulator-name = "vcc_1v8"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vcc1v8_dvp: LDO_REG1 { - regulator-name = "vcc1v8_dvp"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc3v0_touch: LDO_REG2 { - regulator-name = "vcc3v0_touch"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcca_1v8: LDO_REG3 { - regulator-name = "vcca_1v8"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vcc_sdio: LDO_REG4 { - regulator-name = "vcc_sdio"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3000000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3000000>; - }; - }; - - vcca3v0_codec: LDO_REG5 { - regulator-name = "vcca3v0_codec"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_1v5: LDO_REG6 { - regulator-name = "vcc_1v5"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1500000>; - }; - }; - - vcca1v8_codec: LDO_REG7 { - regulator-name = "vcca1v8_codec"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_3v0: LDO_REG8 { - regulator-name = "vcc_3v0"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3000000>; - }; - }; - - vcc3v3_s3: vcc_lan: SWITCH_REG1 { - regulator-name = "vcc3v3_s3"; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc3v3_s0: SWITCH_REG2 { - regulator-name = "vcc3v3_s0"; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - }; - }; - - vdd_cpu_b: regulator@40 { - compatible = "silergy,syr827"; - reg = <0x40>; - fcs,suspend-voltage-selector = <1>; - pinctrl-names = "default"; - pinctrl-0 = <&vsel1_pin>; - regulator-name = "vdd_cpu_b"; - regulator-min-microvolt = <712500>; - regulator-max-microvolt = <1500000>; - regulator-ramp-delay = <1000>; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vcc5v0_sys>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_gpu: regulator@41 { - compatible = "silergy,syr828"; - reg = <0x41>; - fcs,suspend-voltage-selector = <1>; - pinctrl-names = "default"; - pinctrl-0 = <&vsel2_pin>; - regulator-name = "vdd_gpu"; - regulator-min-microvolt = <712500>; - regulator-max-microvolt = <1500000>; - regulator-ramp-delay = <1000>; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vcc5v0_sys>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; -}; - -&i2c1 { - i2c-scl-rising-time-ns = <300>; - i2c-scl-falling-time-ns = <15>; - status = "okay"; -}; - -&i2c3 { - i2c-scl-rising-time-ns = <450>; - i2c-scl-falling-time-ns = <15>; - status = "okay"; -}; - -&i2c4 { - i2c-scl-rising-time-ns = <600>; - i2c-scl-falling-time-ns = <20>; - status = "okay"; - - fusb0: typec-portc@22 { - compatible = "fcs,fusb302"; - reg = <0x22>; - interrupt-parent = <&gpio1>; - interrupts = ; - pinctrl-names = "default"; - pinctrl-0 = <&fusb0_int>; - vbus-supply = <&vcc5v0_typec>; - status = "okay"; - }; - - /* enable for pine64 touch screen support */ - touch: touchscreen@5d { - compatible = "goodix,gt911"; - reg = <0x5d>; - interrupt-parent = <&gpio4>; - interrupts = ; - AVDD28-supply = <&vcc3v0_touch>; - VDDIO-supply = <&vcc3v0_touch>; - irq-gpios = <&gpio4 RK_PD5 GPIO_ACTIVE_HIGH>; - reset-gpios = <&gpio4 RK_PD6 GPIO_ACTIVE_HIGH>; - status = "disabled"; - }; -}; - -&i2s0 { - rockchip,playback-channels = <8>; - rockchip,capture-channels = <8>; - status = "okay"; -}; - -&i2s1 { - rockchip,playback-channels = <2>; - rockchip,capture-channels = <2>; - status = "okay"; - - i2s1_p0: port { - i2s1_p0_0: endpoint { - dai-format = "i2s"; - mclk-fs = <256>; - remote-endpoint = <&es8316_p0_0>; - }; - }; -}; - -&i2s2 { - status = "okay"; -}; - -&io_domains { - status = "okay"; - - bt656-supply = <&vcc1v8_dvp>; - audio-supply = <&vcc_3v0>; - sdmmc-supply = <&vcc_sdio>; - gpio1830-supply = <&vcc_3v0>; -}; - -/* enable for pine64 panel display support */ -&mipi_dsi { - clock-master; - status = "disabled"; - - ports { - mipi_out: port@1 { - reg = <1>; - - mipi_out_panel: endpoint { - remote-endpoint = <&mipi_in_panel>; - }; - }; - }; - - mipi_panel: panel@0 { - compatible = "feiyang,fy07024di26a30d"; - reg = <0>; - avdd-supply = <&avdd>; - backlight = <&backlight>; - dvdd-supply = <&vcc3v3_s0>; - - port { - mipi_in_panel: endpoint { - remote-endpoint = <&mipi_out_panel>; - }; - }; - }; -}; - -&pcie0 { - ep-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>; - num-lanes = <4>; - pinctrl-names = "default"; - pinctrl-0 = <&pcie_perst>; - vpcie12v-supply = <&vcc12v_dcin>; - vpcie3v3-supply = <&vcc3v3_pcie>; - status = "okay"; -}; - -&pcie_phy { - status = "okay"; -}; - -&pmu_io_domains { - pmu1830-supply = <&vcc_3v0>; - status = "okay"; -}; - -&pinctrl { - bt { - bt_enable_h: bt-enable-h { - rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - bt_host_wake_l: bt-host-wake-l { - rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_down>; - }; - - bt_wake_l: bt-wake-l { - rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - buttons { - pwrbtn: pwrbtn { - rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - fusb302x { - fusb0_int: fusb0-int { - rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - ir { - ir_int: ir-int { - rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - leds { - work_led_pin: work-led-pin { - rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - diy_led_pin: diy-led-pin { - rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - pcie { - pcie_perst: pcie-perst { - rockchip,pins = <2 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - pcie_pwr_en: pcie-pwr-en { - rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - pmic { - pmic_int_l: pmic-int-l { - rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>; - }; - - vsel1_pin: vsel1-pin { - rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; - }; - - vsel2_pin: vsel2-pin { - rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; - }; - }; - - sdcard { - sdmmc0_pwr_h: sdmmc0-pwr-h { - rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - }; - - sdio-pwrseq { - wifi_enable_h: wifi-enable-h { - rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - usb-typec { - vcc5v0_typec_en: vcc5v0_typec_en { - rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - usb2 { - vcc5v0_host_en: vcc5v0-host-en { - rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; -}; - -&pwm0 { - status = "okay"; -}; - -&pwm1 { - status = "okay"; -}; - -&pwm2 { - status = "okay"; -}; - -&saradc { - vref-supply = <&vcca1v8_s3>; - status = "okay"; -}; - -&sdio0 { - bus-width = <4>; - cap-sd-highspeed; - cap-sdio-irq; - disable-wp; - keep-power-in-suspend; - mmc-pwrseq = <&sdio_pwrseq>; - non-removable; - pinctrl-names = "default"; - pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>; - sd-uhs-sdr104; - status = "okay"; -}; - -&sdmmc { - bus-width = <4>; - cap-sd-highspeed; - cd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; - disable-wp; - max-frequency = <150000000>; - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>; - vmmc-supply = <&vcc3v0_sd>; - vqmmc-supply = <&vcc_sdio>; - status = "okay"; -}; - -&sdhci { - bus-width = <8>; - mmc-hs200-1_8v; - non-removable; - status = "okay"; -}; - -&spdif { - pinctrl-0 = <&spdif_bus_1>; - - spdif_p0: port { - spdif_p0_0: endpoint { - remote-endpoint = <&dit_p0_0>; - }; - }; -}; - -&spi1 { - status = "okay"; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - }; -}; - -&tcphy0 { - status = "okay"; -}; - -&tcphy1 { - status = "okay"; -}; - -&tsadc { - /* tshut mode 0:CRU 1:GPIO */ - rockchip,hw-tshut-mode = <1>; - /* tshut polarity 0:LOW 1:HIGH */ - rockchip,hw-tshut-polarity = <1>; - status = "okay"; -}; - -&u2phy0 { - status = "okay"; - - u2phy0_otg: otg-port { - status = "okay"; - }; - - u2phy0_host: host-port { - phy-supply = <&vcc5v0_host>; - status = "okay"; - }; -}; - -&u2phy1 { - status = "okay"; - - u2phy1_otg: otg-port { - status = "okay"; - }; - - u2phy1_host: host-port { - phy-supply = <&vcc5v0_host>; - status = "okay"; - }; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; - status = "okay"; - - bluetooth { - compatible = "brcm,bcm43438-bt"; - clocks = <&rk808 1>; - clock-names = "lpo"; - device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>; - host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>; - shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>; - vbat-supply = <&vcc3v3_sys>; - vddio-supply = <&vcc_1v8>; - }; -}; - -&uart2 { - status = "okay"; -}; - -&usb_host0_ehci { - status = "okay"; -}; - -&usb_host0_ohci { - status = "okay"; -}; - -&usb_host1_ehci { - status = "okay"; -}; - -&usb_host1_ohci { - status = "okay"; -}; - -&usbdrd3_0 { - status = "okay"; -}; - -&usbdrd_dwc3_0 { - status = "okay"; - dr_mode = "host"; -}; - -&usbdrd3_1 { - status = "okay"; -}; - -&usbdrd_dwc3_1 { - status = "okay"; - dr_mode = "host"; -}; - -&vopb { - status = "okay"; -}; - -&vopb_mmu { - status = "okay"; -}; - -&vopl { - status = "okay"; -}; - -&vopl_mmu { - status = "okay"; -}; diff --git a/arch/arm/dts/rk3399-t-opp.dtsi b/arch/arm/dts/rk3399-t-opp.dtsi deleted file mode 100644 index 1ababadda9df..000000000000 --- a/arch/arm/dts/rk3399-t-opp.dtsi +++ /dev/null @@ -1,114 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2016-2017 Fuzhou Rockchip Electronics Co., Ltd - * Copyright (c) 2022 Radxa Limited - */ - -/ { - cluster0_opp: opp-table-0 { - compatible = "operating-points-v2"; - opp-shared; - - opp00 { - opp-hz = /bits/ 64 <408000000>; - opp-microvolt = <875000 875000 1250000>; - clock-latency-ns = <40000>; - }; - opp01 { - opp-hz = /bits/ 64 <600000000>; - opp-microvolt = <875000 875000 1250000>; - }; - opp02 { - opp-hz = /bits/ 64 <816000000>; - opp-microvolt = <900000 900000 1250000>; - }; - opp03 { - opp-hz = /bits/ 64 <1008000000>; - opp-microvolt = <975000 975000 1250000>; - }; - }; - - cluster1_opp: opp-table-1 { - compatible = "operating-points-v2"; - opp-shared; - - opp00 { - opp-hz = /bits/ 64 <408000000>; - opp-microvolt = <875000 875000 1250000>; - clock-latency-ns = <40000>; - }; - opp01 { - opp-hz = /bits/ 64 <600000000>; - opp-microvolt = <875000 875000 1250000>; - }; - opp02 { - opp-hz = /bits/ 64 <816000000>; - opp-microvolt = <875000 875000 1250000>; - }; - opp03 { - opp-hz = /bits/ 64 <1008000000>; - opp-microvolt = <925000 925000 1250000>; - }; - opp04 { - opp-hz = /bits/ 64 <1200000000>; - opp-microvolt = <1000000 1000000 1250000>; - }; - opp05 { - opp-hz = /bits/ 64 <1416000000>; - opp-microvolt = <1075000 1075000 1250000>; - }; - opp06 { - opp-hz = /bits/ 64 <1512000000>; - opp-microvolt = <1150000 1150000 1250000>; - }; - }; - - gpu_opp_table: opp-table-2 { - compatible = "operating-points-v2"; - - opp00 { - opp-hz = /bits/ 64 <200000000>; - opp-microvolt = <875000 875000 1150000>; - }; - opp01 { - opp-hz = /bits/ 64 <300000000>; - opp-microvolt = <875000 875000 1150000>; - }; - opp02 { - opp-hz = /bits/ 64 <400000000>; - opp-microvolt = <875000 875000 1150000>; - }; - opp03 { - opp-hz = /bits/ 64 <600000000>; - opp-microvolt = <975000 975000 1150000>; - }; - }; -}; - -&cpu_l0 { - operating-points-v2 = <&cluster0_opp>; -}; - -&cpu_l1 { - operating-points-v2 = <&cluster0_opp>; -}; - -&cpu_l2 { - operating-points-v2 = <&cluster0_opp>; -}; - -&cpu_l3 { - operating-points-v2 = <&cluster0_opp>; -}; - -&cpu_b0 { - operating-points-v2 = <&cluster1_opp>; -}; - -&cpu_b1 { - operating-points-v2 = <&cluster1_opp>; -}; - -&gpu { - operating-points-v2 = <&gpu_opp_table>; -}; diff --git a/arch/arm/dts/rk3399.dtsi b/arch/arm/dts/rk3399.dtsi deleted file mode 100644 index 6e12c5a920ca..000000000000 --- a/arch/arm/dts/rk3399.dtsi +++ /dev/null @@ -1,2945 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd - */ - -#include -#include -#include -#include -#include -#include -#include - -/ { - compatible = "rockchip,rk3399"; - - interrupt-parent = <&gic>; - #address-cells = <2>; - #size-cells = <2>; - - aliases { - gpio0 = &gpio0; - gpio1 = &gpio1; - gpio2 = &gpio2; - gpio3 = &gpio3; - gpio4 = &gpio4; - i2c0 = &i2c0; - i2c1 = &i2c1; - i2c2 = &i2c2; - i2c3 = &i2c3; - i2c4 = &i2c4; - i2c5 = &i2c5; - i2c6 = &i2c6; - i2c7 = &i2c7; - i2c8 = &i2c8; - serial0 = &uart0; - serial1 = &uart1; - serial2 = &uart2; - serial3 = &uart3; - serial4 = &uart4; - }; - - cpus { - #address-cells = <2>; - #size-cells = <0>; - - cpu-map { - cluster0 { - core0 { - cpu = <&cpu_l0>; - }; - core1 { - cpu = <&cpu_l1>; - }; - core2 { - cpu = <&cpu_l2>; - }; - core3 { - cpu = <&cpu_l3>; - }; - }; - - cluster1 { - core0 { - cpu = <&cpu_b0>; - }; - core1 { - cpu = <&cpu_b1>; - }; - }; - }; - - cpu_l0: cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x0 0x0>; - enable-method = "psci"; - capacity-dmips-mhz = <485>; - clocks = <&cru ARMCLKL>; - #cooling-cells = <2>; /* min followed by max */ - dynamic-power-coefficient = <100>; - cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; - }; - - cpu_l1: cpu@1 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x0 0x1>; - enable-method = "psci"; - capacity-dmips-mhz = <485>; - clocks = <&cru ARMCLKL>; - #cooling-cells = <2>; /* min followed by max */ - dynamic-power-coefficient = <100>; - cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; - }; - - cpu_l2: cpu@2 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x0 0x2>; - enable-method = "psci"; - capacity-dmips-mhz = <485>; - clocks = <&cru ARMCLKL>; - #cooling-cells = <2>; /* min followed by max */ - dynamic-power-coefficient = <100>; - cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; - }; - - cpu_l3: cpu@3 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x0 0x3>; - enable-method = "psci"; - capacity-dmips-mhz = <485>; - clocks = <&cru ARMCLKL>; - #cooling-cells = <2>; /* min followed by max */ - dynamic-power-coefficient = <100>; - cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; - }; - - cpu_b0: cpu@100 { - device_type = "cpu"; - compatible = "arm,cortex-a72"; - reg = <0x0 0x100>; - enable-method = "psci"; - capacity-dmips-mhz = <1024>; - clocks = <&cru ARMCLKB>; - #cooling-cells = <2>; /* min followed by max */ - dynamic-power-coefficient = <436>; - cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; - - thermal-idle { - #cooling-cells = <2>; - duration-us = <10000>; - exit-latency-us = <500>; - }; - }; - - cpu_b1: cpu@101 { - device_type = "cpu"; - compatible = "arm,cortex-a72"; - reg = <0x0 0x101>; - enable-method = "psci"; - capacity-dmips-mhz = <1024>; - clocks = <&cru ARMCLKB>; - #cooling-cells = <2>; /* min followed by max */ - dynamic-power-coefficient = <436>; - cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; - - thermal-idle { - #cooling-cells = <2>; - duration-us = <10000>; - exit-latency-us = <500>; - }; - }; - - idle-states { - entry-method = "psci"; - - CPU_SLEEP: cpu-sleep { - compatible = "arm,idle-state"; - local-timer-stop; - arm,psci-suspend-param = <0x0010000>; - entry-latency-us = <120>; - exit-latency-us = <250>; - min-residency-us = <900>; - }; - - CLUSTER_SLEEP: cluster-sleep { - compatible = "arm,idle-state"; - local-timer-stop; - arm,psci-suspend-param = <0x1010000>; - entry-latency-us = <400>; - exit-latency-us = <500>; - min-residency-us = <2000>; - }; - }; - }; - - display-subsystem { - compatible = "rockchip,display-subsystem"; - ports = <&vopl_out>, <&vopb_out>; - }; - - dmc: memory-controller { - compatible = "rockchip,rk3399-dmc"; - rockchip,pmu = <&pmugrf>; - devfreq-events = <&dfi>; - clocks = <&cru SCLK_DDRC>; - clock-names = "dmc_clk"; - status = "disabled"; - }; - - pmu_a53 { - compatible = "arm,cortex-a53-pmu"; - interrupts = ; - }; - - pmu_a72 { - compatible = "arm,cortex-a72-pmu"; - interrupts = ; - }; - - psci { - compatible = "arm,psci-1.0"; - method = "smc"; - }; - - timer { - compatible = "arm,armv8-timer"; - interrupts = , - , - , - ; - arm,no-tick-in-suspend; - }; - - xin24m: xin24m { - compatible = "fixed-clock"; - clock-frequency = <24000000>; - clock-output-names = "xin24m"; - #clock-cells = <0>; - }; - - pcie0: pcie@f8000000 { - compatible = "rockchip,rk3399-pcie"; - reg = <0x0 0xf8000000 0x0 0x2000000>, - <0x0 0xfd000000 0x0 0x1000000>; - reg-names = "axi-base", "apb-base"; - device_type = "pci"; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - aspm-no-l0s; - bus-range = <0x0 0x1f>; - clocks = <&cru ACLK_PCIE>, <&cru ACLK_PERF_PCIE>, - <&cru PCLK_PCIE>, <&cru SCLK_PCIE_PM>; - clock-names = "aclk", "aclk-perf", - "hclk", "pm"; - interrupts = , - , - ; - interrupt-names = "sys", "legacy", "client"; - interrupt-map-mask = <0 0 0 7>; - interrupt-map = <0 0 0 1 &pcie0_intc 0>, - <0 0 0 2 &pcie0_intc 1>, - <0 0 0 3 &pcie0_intc 2>, - <0 0 0 4 &pcie0_intc 3>; - max-link-speed = <1>; - msi-map = <0x0 &its 0x0 0x1000>; - phys = <&pcie_phy 0>, <&pcie_phy 1>, - <&pcie_phy 2>, <&pcie_phy 3>; - phy-names = "pcie-phy-0", "pcie-phy-1", - "pcie-phy-2", "pcie-phy-3"; - ranges = <0x82000000 0x0 0xfa000000 0x0 0xfa000000 0x0 0x1e00000>, - <0x81000000 0x0 0xfbe00000 0x0 0xfbe00000 0x0 0x100000>; - resets = <&cru SRST_PCIE_CORE>, <&cru SRST_PCIE_MGMT>, - <&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE>, - <&cru SRST_PCIE_PM>, <&cru SRST_P_PCIE>, - <&cru SRST_A_PCIE>; - reset-names = "core", "mgmt", "mgmt-sticky", "pipe", - "pm", "pclk", "aclk"; - status = "disabled"; - - pcie0_intc: interrupt-controller { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <1>; - }; - }; - - pcie0_ep: pcie-ep@f8000000 { - compatible = "rockchip,rk3399-pcie-ep"; - reg = <0x0 0xfd000000 0x0 0x1000000>, - <0x0 0xfa000000 0x0 0x2000000>; - reg-names = "apb-base", "mem-base"; - clocks = <&cru ACLK_PCIE>, <&cru ACLK_PERF_PCIE>, - <&cru PCLK_PCIE>, <&cru SCLK_PCIE_PM>; - clock-names = "aclk", "aclk-perf", - "hclk", "pm"; - max-functions = /bits/ 8 <8>; - num-lanes = <4>; - resets = <&cru SRST_PCIE_CORE>, <&cru SRST_PCIE_MGMT>, - <&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE>, - <&cru SRST_PCIE_PM>, <&cru SRST_P_PCIE>, - <&cru SRST_A_PCIE>; - reset-names = "core", "mgmt", "mgmt-sticky", "pipe", - "pm", "pclk", "aclk"; - phys = <&pcie_phy 0>, <&pcie_phy 1>, - <&pcie_phy 2>, <&pcie_phy 3>; - phy-names = "pcie-phy-0", "pcie-phy-1", - "pcie-phy-2", "pcie-phy-3"; - rockchip,max-outbound-regions = <32>; - pinctrl-names = "default"; - pinctrl-0 = <&pcie_clkreqnb_cpm>; - status = "disabled"; - }; - - gmac: ethernet@fe300000 { - compatible = "rockchip,rk3399-gmac"; - reg = <0x0 0xfe300000 0x0 0x10000>; - interrupts = ; - interrupt-names = "macirq"; - clocks = <&cru SCLK_MAC>, <&cru SCLK_MAC_RX>, - <&cru SCLK_MAC_TX>, <&cru SCLK_MACREF>, - <&cru SCLK_MACREF_OUT>, <&cru ACLK_GMAC>, - <&cru PCLK_GMAC>; - clock-names = "stmmaceth", "mac_clk_rx", - "mac_clk_tx", "clk_mac_ref", - "clk_mac_refout", "aclk_mac", - "pclk_mac"; - power-domains = <&power RK3399_PD_GMAC>; - resets = <&cru SRST_A_GMAC>; - reset-names = "stmmaceth"; - rockchip,grf = <&grf>; - snps,txpbl = <0x4>; - status = "disabled"; - }; - - sdio0: mmc@fe310000 { - compatible = "rockchip,rk3399-dw-mshc", - "rockchip,rk3288-dw-mshc"; - reg = <0x0 0xfe310000 0x0 0x4000>; - interrupts = ; - max-frequency = <150000000>; - clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>, - <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>; - clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; - fifo-depth = <0x100>; - power-domains = <&power RK3399_PD_SDIOAUDIO>; - resets = <&cru SRST_SDIO0>; - reset-names = "reset"; - status = "disabled"; - }; - - sdmmc: mmc@fe320000 { - compatible = "rockchip,rk3399-dw-mshc", - "rockchip,rk3288-dw-mshc"; - reg = <0x0 0xfe320000 0x0 0x4000>; - interrupts = ; - max-frequency = <150000000>; - assigned-clocks = <&cru HCLK_SD>; - assigned-clock-rates = <200000000>; - clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>, - <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>; - clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; - fifo-depth = <0x100>; - power-domains = <&power RK3399_PD_SD>; - resets = <&cru SRST_SDMMC>; - reset-names = "reset"; - status = "disabled"; - }; - - sdhci: mmc@fe330000 { - compatible = "rockchip,rk3399-sdhci-5.1", "arasan,sdhci-5.1"; - reg = <0x0 0xfe330000 0x0 0x10000>; - interrupts = ; - arasan,soc-ctl-syscon = <&grf>; - assigned-clocks = <&cru SCLK_EMMC>; - assigned-clock-rates = <200000000>; - clocks = <&cru SCLK_EMMC>, <&cru ACLK_EMMC>; - clock-names = "clk_xin", "clk_ahb"; - clock-output-names = "emmc_cardclock"; - #clock-cells = <0>; - phys = <&emmc_phy>; - phy-names = "phy_arasan"; - power-domains = <&power RK3399_PD_EMMC>; - disable-cqe-dcmd; - status = "disabled"; - }; - - usb_host0_ehci: usb@fe380000 { - compatible = "generic-ehci"; - reg = <0x0 0xfe380000 0x0 0x20000>; - interrupts = ; - clocks = <&cru HCLK_HOST0>, <&cru HCLK_HOST0_ARB>, - <&u2phy0>; - phys = <&u2phy0_host>; - phy-names = "usb"; - status = "disabled"; - }; - - usb_host0_ohci: usb@fe3a0000 { - compatible = "generic-ohci"; - reg = <0x0 0xfe3a0000 0x0 0x20000>; - interrupts = ; - clocks = <&cru HCLK_HOST0>, <&cru HCLK_HOST0_ARB>, - <&u2phy0>; - phys = <&u2phy0_host>; - phy-names = "usb"; - status = "disabled"; - }; - - usb_host1_ehci: usb@fe3c0000 { - compatible = "generic-ehci"; - reg = <0x0 0xfe3c0000 0x0 0x20000>; - interrupts = ; - clocks = <&cru HCLK_HOST1>, <&cru HCLK_HOST1_ARB>, - <&u2phy1>; - phys = <&u2phy1_host>; - phy-names = "usb"; - status = "disabled"; - }; - - usb_host1_ohci: usb@fe3e0000 { - compatible = "generic-ohci"; - reg = <0x0 0xfe3e0000 0x0 0x20000>; - interrupts = ; - clocks = <&cru HCLK_HOST1>, <&cru HCLK_HOST1_ARB>, - <&u2phy1>; - phys = <&u2phy1_host>; - phy-names = "usb"; - status = "disabled"; - }; - - debug@fe430000 { - compatible = "arm,coresight-cpu-debug", "arm,primecell"; - reg = <0 0xfe430000 0 0x1000>; - clocks = <&cru PCLK_COREDBG_L>; - clock-names = "apb_pclk"; - cpu = <&cpu_l0>; - }; - - debug@fe432000 { - compatible = "arm,coresight-cpu-debug", "arm,primecell"; - reg = <0 0xfe432000 0 0x1000>; - clocks = <&cru PCLK_COREDBG_L>; - clock-names = "apb_pclk"; - cpu = <&cpu_l1>; - }; - - debug@fe434000 { - compatible = "arm,coresight-cpu-debug", "arm,primecell"; - reg = <0 0xfe434000 0 0x1000>; - clocks = <&cru PCLK_COREDBG_L>; - clock-names = "apb_pclk"; - cpu = <&cpu_l2>; - }; - - debug@fe436000 { - compatible = "arm,coresight-cpu-debug", "arm,primecell"; - reg = <0 0xfe436000 0 0x1000>; - clocks = <&cru PCLK_COREDBG_L>; - clock-names = "apb_pclk"; - cpu = <&cpu_l3>; - }; - - debug@fe610000 { - compatible = "arm,coresight-cpu-debug", "arm,primecell"; - reg = <0 0xfe610000 0 0x1000>; - clocks = <&cru PCLK_COREDBG_B>; - clock-names = "apb_pclk"; - cpu = <&cpu_b0>; - }; - - debug@fe710000 { - compatible = "arm,coresight-cpu-debug", "arm,primecell"; - reg = <0 0xfe710000 0 0x1000>; - clocks = <&cru PCLK_COREDBG_B>; - clock-names = "apb_pclk"; - cpu = <&cpu_b1>; - }; - - usbdrd3_0: usb@fe800000 { - compatible = "rockchip,rk3399-dwc3"; - #address-cells = <2>; - #size-cells = <2>; - ranges; - clocks = <&cru SCLK_USB3OTG0_REF>, <&cru SCLK_USB3OTG0_SUSPEND>, - <&cru ACLK_USB3OTG0>, <&cru ACLK_USB3_RKSOC_AXI_PERF>, - <&cru ACLK_USB3>, <&cru ACLK_USB3_GRF>; - clock-names = "ref_clk", "suspend_clk", - "bus_clk", "aclk_usb3_rksoc_axi_perf", - "aclk_usb3", "grf_clk"; - resets = <&cru SRST_A_USB3_OTG0>; - reset-names = "usb3-otg"; - status = "disabled"; - - usbdrd_dwc3_0: usb@fe800000 { - compatible = "snps,dwc3"; - reg = <0x0 0xfe800000 0x0 0x100000>; - interrupts = ; - clocks = <&cru SCLK_USB3OTG0_REF>, <&cru ACLK_USB3OTG0>, - <&cru SCLK_USB3OTG0_SUSPEND>; - clock-names = "ref", "bus_early", "suspend"; - dr_mode = "otg"; - phys = <&u2phy0_otg>, <&tcphy0_usb3>; - phy-names = "usb2-phy", "usb3-phy"; - phy_type = "utmi_wide"; - snps,dis_enblslpm_quirk; - snps,dis-u2-freeclk-exists-quirk; - snps,dis_u2_susphy_quirk; - snps,dis-del-phy-power-chg-quirk; - snps,dis-tx-ipgap-linecheck-quirk; - power-domains = <&power RK3399_PD_USB3>; - status = "disabled"; - }; - }; - - usbdrd3_1: usb@fe900000 { - compatible = "rockchip,rk3399-dwc3"; - #address-cells = <2>; - #size-cells = <2>; - ranges; - clocks = <&cru SCLK_USB3OTG1_REF>, <&cru SCLK_USB3OTG1_SUSPEND>, - <&cru ACLK_USB3OTG1>, <&cru ACLK_USB3_RKSOC_AXI_PERF>, - <&cru ACLK_USB3>, <&cru ACLK_USB3_GRF>; - clock-names = "ref_clk", "suspend_clk", - "bus_clk", "aclk_usb3_rksoc_axi_perf", - "aclk_usb3", "grf_clk"; - resets = <&cru SRST_A_USB3_OTG1>; - reset-names = "usb3-otg"; - status = "disabled"; - - usbdrd_dwc3_1: usb@fe900000 { - compatible = "snps,dwc3"; - reg = <0x0 0xfe900000 0x0 0x100000>; - interrupts = ; - clocks = <&cru SCLK_USB3OTG1_REF>, <&cru ACLK_USB3OTG1>, - <&cru SCLK_USB3OTG1_SUSPEND>; - clock-names = "ref", "bus_early", "suspend"; - dr_mode = "otg"; - phys = <&u2phy1_otg>, <&tcphy1_usb3>; - phy-names = "usb2-phy", "usb3-phy"; - phy_type = "utmi_wide"; - snps,dis_enblslpm_quirk; - snps,dis-u2-freeclk-exists-quirk; - snps,dis_u2_susphy_quirk; - snps,dis-del-phy-power-chg-quirk; - snps,dis-tx-ipgap-linecheck-quirk; - power-domains = <&power RK3399_PD_USB3>; - status = "disabled"; - }; - }; - - cdn_dp: dp@fec00000 { - compatible = "rockchip,rk3399-cdn-dp"; - reg = <0x0 0xfec00000 0x0 0x100000>; - interrupts = ; - assigned-clocks = <&cru SCLK_DP_CORE>, <&cru SCLK_SPDIF_REC_DPTX>; - assigned-clock-rates = <100000000>, <200000000>; - clocks = <&cru SCLK_DP_CORE>, <&cru PCLK_DP_CTRL>, - <&cru SCLK_SPDIF_REC_DPTX>, <&cru PCLK_VIO_GRF>; - clock-names = "core-clk", "pclk", "spdif", "grf"; - phys = <&tcphy0_dp>, <&tcphy1_dp>; - power-domains = <&power RK3399_PD_HDCP>; - resets = <&cru SRST_DPTX_SPDIF_REC>, <&cru SRST_P_UPHY0_DPTX>, - <&cru SRST_P_UPHY0_APB>, <&cru SRST_DP_CORE>; - reset-names = "spdif", "dptx", "apb", "core"; - rockchip,grf = <&grf>; - #sound-dai-cells = <1>; - status = "disabled"; - - ports { - dp_in: port { - #address-cells = <1>; - #size-cells = <0>; - - dp_in_vopb: endpoint@0 { - reg = <0>; - remote-endpoint = <&vopb_out_dp>; - }; - - dp_in_vopl: endpoint@1 { - reg = <1>; - remote-endpoint = <&vopl_out_dp>; - }; - }; - }; - }; - - gic: interrupt-controller@fee00000 { - compatible = "arm,gic-v3"; - #interrupt-cells = <4>; - #address-cells = <2>; - #size-cells = <2>; - ranges; - interrupt-controller; - - reg = <0x0 0xfee00000 0 0x10000>, /* GICD */ - <0x0 0xfef00000 0 0xc0000>, /* GICR */ - <0x0 0xfff00000 0 0x10000>, /* GICC */ - <0x0 0xfff10000 0 0x10000>, /* GICH */ - <0x0 0xfff20000 0 0x10000>; /* GICV */ - interrupts = ; - its: msi-controller@fee20000 { - compatible = "arm,gic-v3-its"; - msi-controller; - #msi-cells = <1>; - reg = <0x0 0xfee20000 0x0 0x20000>; - }; - - ppi-partitions { - ppi_cluster0: interrupt-partition-0 { - affinity = <&cpu_l0 &cpu_l1 &cpu_l2 &cpu_l3>; - }; - - ppi_cluster1: interrupt-partition-1 { - affinity = <&cpu_b0 &cpu_b1>; - }; - }; - }; - - saradc: saradc@ff100000 { - compatible = "rockchip,rk3399-saradc"; - reg = <0x0 0xff100000 0x0 0x100>; - interrupts = ; - #io-channel-cells = <1>; - clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>; - clock-names = "saradc", "apb_pclk"; - resets = <&cru SRST_P_SARADC>; - reset-names = "saradc-apb"; - status = "disabled"; - }; - - crypto0: crypto@ff8b0000 { - compatible = "rockchip,rk3399-crypto"; - reg = <0x0 0xff8b0000 0x0 0x4000>; - interrupts = ; - clocks = <&cru HCLK_M_CRYPTO0>, <&cru HCLK_S_CRYPTO0>, <&cru SCLK_CRYPTO0>; - clock-names = "hclk_master", "hclk_slave", "sclk"; - resets = <&cru SRST_CRYPTO0>, <&cru SRST_CRYPTO0_S>, <&cru SRST_CRYPTO0_M>; - reset-names = "master", "slave", "crypto-rst"; - }; - - crypto1: crypto@ff8b8000 { - compatible = "rockchip,rk3399-crypto"; - reg = <0x0 0xff8b8000 0x0 0x4000>; - interrupts = ; - clocks = <&cru HCLK_M_CRYPTO1>, <&cru HCLK_S_CRYPTO1>, <&cru SCLK_CRYPTO1>; - clock-names = "hclk_master", "hclk_slave", "sclk"; - resets = <&cru SRST_CRYPTO1>, <&cru SRST_CRYPTO1_S>, <&cru SRST_CRYPTO1_M>; - reset-names = "master", "slave", "crypto-rst"; - }; - - i2c1: i2c@ff110000 { - compatible = "rockchip,rk3399-i2c"; - reg = <0x0 0xff110000 0x0 0x1000>; - assigned-clocks = <&cru SCLK_I2C1>; - assigned-clock-rates = <200000000>; - clocks = <&cru SCLK_I2C1>, <&cru PCLK_I2C1>; - clock-names = "i2c", "pclk"; - interrupts = ; - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_xfer>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - i2c2: i2c@ff120000 { - compatible = "rockchip,rk3399-i2c"; - reg = <0x0 0xff120000 0x0 0x1000>; - assigned-clocks = <&cru SCLK_I2C2>; - assigned-clock-rates = <200000000>; - clocks = <&cru SCLK_I2C2>, <&cru PCLK_I2C2>; - clock-names = "i2c", "pclk"; - interrupts = ; - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_xfer>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - i2c3: i2c@ff130000 { - compatible = "rockchip,rk3399-i2c"; - reg = <0x0 0xff130000 0x0 0x1000>; - assigned-clocks = <&cru SCLK_I2C3>; - assigned-clock-rates = <200000000>; - clocks = <&cru SCLK_I2C3>, <&cru PCLK_I2C3>; - clock-names = "i2c", "pclk"; - interrupts = ; - pinctrl-names = "default"; - pinctrl-0 = <&i2c3_xfer>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - i2c5: i2c@ff140000 { - compatible = "rockchip,rk3399-i2c"; - reg = <0x0 0xff140000 0x0 0x1000>; - assigned-clocks = <&cru SCLK_I2C5>; - assigned-clock-rates = <200000000>; - clocks = <&cru SCLK_I2C5>, <&cru PCLK_I2C5>; - clock-names = "i2c", "pclk"; - interrupts = ; - pinctrl-names = "default"; - pinctrl-0 = <&i2c5_xfer>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - i2c6: i2c@ff150000 { - compatible = "rockchip,rk3399-i2c"; - reg = <0x0 0xff150000 0x0 0x1000>; - assigned-clocks = <&cru SCLK_I2C6>; - assigned-clock-rates = <200000000>; - clocks = <&cru SCLK_I2C6>, <&cru PCLK_I2C6>; - clock-names = "i2c", "pclk"; - interrupts = ; - pinctrl-names = "default"; - pinctrl-0 = <&i2c6_xfer>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - i2c7: i2c@ff160000 { - compatible = "rockchip,rk3399-i2c"; - reg = <0x0 0xff160000 0x0 0x1000>; - assigned-clocks = <&cru SCLK_I2C7>; - assigned-clock-rates = <200000000>; - clocks = <&cru SCLK_I2C7>, <&cru PCLK_I2C7>; - clock-names = "i2c", "pclk"; - interrupts = ; - pinctrl-names = "default"; - pinctrl-0 = <&i2c7_xfer>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - uart0: serial@ff180000 { - compatible = "rockchip,rk3399-uart", "snps,dw-apb-uart"; - reg = <0x0 0xff180000 0x0 0x100>; - clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>; - clock-names = "baudclk", "apb_pclk"; - interrupts = ; - reg-shift = <2>; - reg-io-width = <4>; - pinctrl-names = "default"; - pinctrl-0 = <&uart0_xfer>; - status = "disabled"; - }; - - uart1: serial@ff190000 { - compatible = "rockchip,rk3399-uart", "snps,dw-apb-uart"; - reg = <0x0 0xff190000 0x0 0x100>; - clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>; - clock-names = "baudclk", "apb_pclk"; - interrupts = ; - reg-shift = <2>; - reg-io-width = <4>; - pinctrl-names = "default"; - pinctrl-0 = <&uart1_xfer>; - status = "disabled"; - }; - - uart2: serial@ff1a0000 { - compatible = "rockchip,rk3399-uart", "snps,dw-apb-uart"; - reg = <0x0 0xff1a0000 0x0 0x100>; - clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>; - clock-names = "baudclk", "apb_pclk"; - interrupts = ; - reg-shift = <2>; - reg-io-width = <4>; - pinctrl-names = "default"; - pinctrl-0 = <&uart2c_xfer>; - status = "disabled"; - }; - - uart3: serial@ff1b0000 { - compatible = "rockchip,rk3399-uart", "snps,dw-apb-uart"; - reg = <0x0 0xff1b0000 0x0 0x100>; - clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>; - clock-names = "baudclk", "apb_pclk"; - interrupts = ; - reg-shift = <2>; - reg-io-width = <4>; - pinctrl-names = "default"; - pinctrl-0 = <&uart3_xfer>; - status = "disabled"; - }; - - spi0: spi@ff1c0000 { - compatible = "rockchip,rk3399-spi", "rockchip,rk3066-spi"; - reg = <0x0 0xff1c0000 0x0 0x1000>; - clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>; - clock-names = "spiclk", "apb_pclk"; - interrupts = ; - dmas = <&dmac_peri 10>, <&dmac_peri 11>; - dma-names = "tx", "rx"; - pinctrl-names = "default"; - pinctrl-0 = <&spi0_clk &spi0_tx &spi0_rx &spi0_cs0>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - spi1: spi@ff1d0000 { - compatible = "rockchip,rk3399-spi", "rockchip,rk3066-spi"; - reg = <0x0 0xff1d0000 0x0 0x1000>; - clocks = <&cru SCLK_SPI1>, <&cru PCLK_SPI1>; - clock-names = "spiclk", "apb_pclk"; - interrupts = ; - dmas = <&dmac_peri 12>, <&dmac_peri 13>; - dma-names = "tx", "rx"; - pinctrl-names = "default"; - pinctrl-0 = <&spi1_clk &spi1_tx &spi1_rx &spi1_cs0>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - spi2: spi@ff1e0000 { - compatible = "rockchip,rk3399-spi", "rockchip,rk3066-spi"; - reg = <0x0 0xff1e0000 0x0 0x1000>; - clocks = <&cru SCLK_SPI2>, <&cru PCLK_SPI2>; - clock-names = "spiclk", "apb_pclk"; - interrupts = ; - dmas = <&dmac_peri 14>, <&dmac_peri 15>; - dma-names = "tx", "rx"; - pinctrl-names = "default"; - pinctrl-0 = <&spi2_clk &spi2_tx &spi2_rx &spi2_cs0>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - spi4: spi@ff1f0000 { - compatible = "rockchip,rk3399-spi", "rockchip,rk3066-spi"; - reg = <0x0 0xff1f0000 0x0 0x1000>; - clocks = <&cru SCLK_SPI4>, <&cru PCLK_SPI4>; - clock-names = "spiclk", "apb_pclk"; - interrupts = ; - dmas = <&dmac_peri 18>, <&dmac_peri 19>; - dma-names = "tx", "rx"; - pinctrl-names = "default"; - pinctrl-0 = <&spi4_clk &spi4_tx &spi4_rx &spi4_cs0>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - spi5: spi@ff200000 { - compatible = "rockchip,rk3399-spi", "rockchip,rk3066-spi"; - reg = <0x0 0xff200000 0x0 0x1000>; - clocks = <&cru SCLK_SPI5>, <&cru PCLK_SPI5>; - clock-names = "spiclk", "apb_pclk"; - interrupts = ; - dmas = <&dmac_bus 8>, <&dmac_bus 9>; - dma-names = "tx", "rx"; - pinctrl-names = "default"; - pinctrl-0 = <&spi5_clk &spi5_tx &spi5_rx &spi5_cs0>; - power-domains = <&power RK3399_PD_SDIOAUDIO>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - thermal_zones: thermal-zones { - cpu_thermal: cpu-thermal { - polling-delay-passive = <100>; - polling-delay = <1000>; - - thermal-sensors = <&tsadc 0>; - - trips { - cpu_alert0: cpu_alert0 { - temperature = <70000>; - hysteresis = <2000>; - type = "passive"; - }; - cpu_alert1: cpu_alert1 { - temperature = <75000>; - hysteresis = <2000>; - type = "passive"; - }; - cpu_crit: cpu_crit { - temperature = <95000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - - cooling-maps { - map0 { - trip = <&cpu_alert0>; - cooling-device = - <&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu_b1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - map1 { - trip = <&cpu_alert1>; - cooling-device = - <&cpu_l0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu_l1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu_l2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu_l3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu_b1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; - }; - - gpu_thermal: gpu-thermal { - polling-delay-passive = <100>; - polling-delay = <1000>; - - thermal-sensors = <&tsadc 1>; - - trips { - gpu_alert0: gpu_alert0 { - temperature = <75000>; - hysteresis = <2000>; - type = "passive"; - }; - gpu_crit: gpu_crit { - temperature = <95000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - - cooling-maps { - map0 { - trip = <&gpu_alert0>; - cooling-device = - <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; - }; - }; - - tsadc: tsadc@ff260000 { - compatible = "rockchip,rk3399-tsadc"; - reg = <0x0 0xff260000 0x0 0x100>; - interrupts = ; - assigned-clocks = <&cru SCLK_TSADC>; - assigned-clock-rates = <750000>; - clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>; - clock-names = "tsadc", "apb_pclk"; - resets = <&cru SRST_TSADC>; - reset-names = "tsadc-apb"; - rockchip,grf = <&grf>; - rockchip,hw-tshut-temp = <95000>; - pinctrl-names = "init", "default", "sleep"; - pinctrl-0 = <&otp_pin>; - pinctrl-1 = <&otp_out>; - pinctrl-2 = <&otp_pin>; - #thermal-sensor-cells = <1>; - status = "disabled"; - }; - - qos_emmc: qos@ffa58000 { - compatible = "rockchip,rk3399-qos", "syscon"; - reg = <0x0 0xffa58000 0x0 0x20>; - }; - - qos_gmac: qos@ffa5c000 { - compatible = "rockchip,rk3399-qos", "syscon"; - reg = <0x0 0xffa5c000 0x0 0x20>; - }; - - qos_pcie: qos@ffa60080 { - compatible = "rockchip,rk3399-qos", "syscon"; - reg = <0x0 0xffa60080 0x0 0x20>; - }; - - qos_usb_host0: qos@ffa60100 { - compatible = "rockchip,rk3399-qos", "syscon"; - reg = <0x0 0xffa60100 0x0 0x20>; - }; - - qos_usb_host1: qos@ffa60180 { - compatible = "rockchip,rk3399-qos", "syscon"; - reg = <0x0 0xffa60180 0x0 0x20>; - }; - - qos_usb_otg0: qos@ffa70000 { - compatible = "rockchip,rk3399-qos", "syscon"; - reg = <0x0 0xffa70000 0x0 0x20>; - }; - - qos_usb_otg1: qos@ffa70080 { - compatible = "rockchip,rk3399-qos", "syscon"; - reg = <0x0 0xffa70080 0x0 0x20>; - }; - - qos_sd: qos@ffa74000 { - compatible = "rockchip,rk3399-qos", "syscon"; - reg = <0x0 0xffa74000 0x0 0x20>; - }; - - qos_sdioaudio: qos@ffa76000 { - compatible = "rockchip,rk3399-qos", "syscon"; - reg = <0x0 0xffa76000 0x0 0x20>; - }; - - qos_hdcp: qos@ffa90000 { - compatible = "rockchip,rk3399-qos", "syscon"; - reg = <0x0 0xffa90000 0x0 0x20>; - }; - - qos_iep: qos@ffa98000 { - compatible = "rockchip,rk3399-qos", "syscon"; - reg = <0x0 0xffa98000 0x0 0x20>; - }; - - qos_isp0_m0: qos@ffaa0000 { - compatible = "rockchip,rk3399-qos", "syscon"; - reg = <0x0 0xffaa0000 0x0 0x20>; - }; - - qos_isp0_m1: qos@ffaa0080 { - compatible = "rockchip,rk3399-qos", "syscon"; - reg = <0x0 0xffaa0080 0x0 0x20>; - }; - - qos_isp1_m0: qos@ffaa8000 { - compatible = "rockchip,rk3399-qos", "syscon"; - reg = <0x0 0xffaa8000 0x0 0x20>; - }; - - qos_isp1_m1: qos@ffaa8080 { - compatible = "rockchip,rk3399-qos", "syscon"; - reg = <0x0 0xffaa8080 0x0 0x20>; - }; - - qos_rga_r: qos@ffab0000 { - compatible = "rockchip,rk3399-qos", "syscon"; - reg = <0x0 0xffab0000 0x0 0x20>; - }; - - qos_rga_w: qos@ffab0080 { - compatible = "rockchip,rk3399-qos", "syscon"; - reg = <0x0 0xffab0080 0x0 0x20>; - }; - - qos_video_m0: qos@ffab8000 { - compatible = "rockchip,rk3399-qos", "syscon"; - reg = <0x0 0xffab8000 0x0 0x20>; - }; - - qos_video_m1_r: qos@ffac0000 { - compatible = "rockchip,rk3399-qos", "syscon"; - reg = <0x0 0xffac0000 0x0 0x20>; - }; - - qos_video_m1_w: qos@ffac0080 { - compatible = "rockchip,rk3399-qos", "syscon"; - reg = <0x0 0xffac0080 0x0 0x20>; - }; - - qos_vop_big_r: qos@ffac8000 { - compatible = "rockchip,rk3399-qos", "syscon"; - reg = <0x0 0xffac8000 0x0 0x20>; - }; - - qos_vop_big_w: qos@ffac8080 { - compatible = "rockchip,rk3399-qos", "syscon"; - reg = <0x0 0xffac8080 0x0 0x20>; - }; - - qos_vop_little: qos@ffad0000 { - compatible = "rockchip,rk3399-qos", "syscon"; - reg = <0x0 0xffad0000 0x0 0x20>; - }; - - qos_perihp: qos@ffad8080 { - compatible = "rockchip,rk3399-qos", "syscon"; - reg = <0x0 0xffad8080 0x0 0x20>; - }; - - qos_gpu: qos@ffae0000 { - compatible = "rockchip,rk3399-qos", "syscon"; - reg = <0x0 0xffae0000 0x0 0x20>; - }; - - pmu: power-management@ff310000 { - compatible = "rockchip,rk3399-pmu", "syscon", "simple-mfd"; - reg = <0x0 0xff310000 0x0 0x1000>; - - /* - * Note: RK3399 supports 6 voltage domains including VD_CORE_L, - * VD_CORE_B, VD_CENTER, VD_GPU, VD_LOGIC and VD_PMU. - * Some of the power domains are grouped together for every - * voltage domain. - * The detail contents as below. - */ - power: power-controller { - compatible = "rockchip,rk3399-power-controller"; - #power-domain-cells = <1>; - #address-cells = <1>; - #size-cells = <0>; - - /* These power domains are grouped by VD_CENTER */ - power-domain@RK3399_PD_IEP { - reg = ; - clocks = <&cru ACLK_IEP>, - <&cru HCLK_IEP>; - pm_qos = <&qos_iep>; - #power-domain-cells = <0>; - }; - power-domain@RK3399_PD_RGA { - reg = ; - clocks = <&cru ACLK_RGA>, - <&cru HCLK_RGA>; - pm_qos = <&qos_rga_r>, - <&qos_rga_w>; - #power-domain-cells = <0>; - }; - power-domain@RK3399_PD_VCODEC { - reg = ; - clocks = <&cru ACLK_VCODEC>, - <&cru HCLK_VCODEC>; - pm_qos = <&qos_video_m0>; - #power-domain-cells = <0>; - }; - power-domain@RK3399_PD_VDU { - reg = ; - clocks = <&cru ACLK_VDU>, - <&cru HCLK_VDU>, - <&cru SCLK_VDU_CA>, - <&cru SCLK_VDU_CORE>; - pm_qos = <&qos_video_m1_r>, - <&qos_video_m1_w>; - #power-domain-cells = <0>; - }; - - /* These power domains are grouped by VD_GPU */ - power-domain@RK3399_PD_GPU { - reg = ; - clocks = <&cru ACLK_GPU>; - pm_qos = <&qos_gpu>; - #power-domain-cells = <0>; - }; - - /* These power domains are grouped by VD_LOGIC */ - power-domain@RK3399_PD_EDP { - reg = ; - clocks = <&cru PCLK_EDP_CTRL>; - #power-domain-cells = <0>; - }; - power-domain@RK3399_PD_EMMC { - reg = ; - clocks = <&cru ACLK_EMMC>; - pm_qos = <&qos_emmc>; - #power-domain-cells = <0>; - }; - power-domain@RK3399_PD_GMAC { - reg = ; - clocks = <&cru ACLK_GMAC>, - <&cru PCLK_GMAC>; - pm_qos = <&qos_gmac>; - #power-domain-cells = <0>; - }; - power-domain@RK3399_PD_SD { - reg = ; - clocks = <&cru HCLK_SDMMC>, - <&cru SCLK_SDMMC>; - pm_qos = <&qos_sd>; - #power-domain-cells = <0>; - }; - power-domain@RK3399_PD_SDIOAUDIO { - reg = ; - clocks = <&cru HCLK_SDIO>; - pm_qos = <&qos_sdioaudio>; - #power-domain-cells = <0>; - }; - power-domain@RK3399_PD_TCPD0 { - reg = ; - clocks = <&cru SCLK_UPHY0_TCPDCORE>, - <&cru SCLK_UPHY0_TCPDPHY_REF>; - #power-domain-cells = <0>; - }; - power-domain@RK3399_PD_TCPD1 { - reg = ; - clocks = <&cru SCLK_UPHY1_TCPDCORE>, - <&cru SCLK_UPHY1_TCPDPHY_REF>; - #power-domain-cells = <0>; - }; - power-domain@RK3399_PD_USB3 { - reg = ; - clocks = <&cru ACLK_USB3>; - pm_qos = <&qos_usb_otg0>, - <&qos_usb_otg1>; - #power-domain-cells = <0>; - }; - power-domain@RK3399_PD_VIO { - reg = ; - #power-domain-cells = <1>; - #address-cells = <1>; - #size-cells = <0>; - - power-domain@RK3399_PD_HDCP { - reg = ; - clocks = <&cru ACLK_HDCP>, - <&cru HCLK_HDCP>, - <&cru PCLK_HDCP>; - pm_qos = <&qos_hdcp>; - #power-domain-cells = <0>; - }; - power-domain@RK3399_PD_ISP0 { - reg = ; - clocks = <&cru ACLK_ISP0>, - <&cru HCLK_ISP0>; - pm_qos = <&qos_isp0_m0>, - <&qos_isp0_m1>; - #power-domain-cells = <0>; - }; - power-domain@RK3399_PD_ISP1 { - reg = ; - clocks = <&cru ACLK_ISP1>, - <&cru HCLK_ISP1>; - pm_qos = <&qos_isp1_m0>, - <&qos_isp1_m1>; - #power-domain-cells = <0>; - }; - power-domain@RK3399_PD_VO { - reg = ; - #power-domain-cells = <1>; - #address-cells = <1>; - #size-cells = <0>; - - power-domain@RK3399_PD_VOPB { - reg = ; - clocks = <&cru ACLK_VOP0>, - <&cru HCLK_VOP0>; - pm_qos = <&qos_vop_big_r>, - <&qos_vop_big_w>; - #power-domain-cells = <0>; - }; - power-domain@RK3399_PD_VOPL { - reg = ; - clocks = <&cru ACLK_VOP1>, - <&cru HCLK_VOP1>; - pm_qos = <&qos_vop_little>; - #power-domain-cells = <0>; - }; - }; - }; - }; - }; - - pmugrf: syscon@ff320000 { - compatible = "rockchip,rk3399-pmugrf", "syscon", "simple-mfd"; - reg = <0x0 0xff320000 0x0 0x1000>; - - pmu_io_domains: io-domains { - compatible = "rockchip,rk3399-pmu-io-voltage-domain"; - status = "disabled"; - }; - }; - - spi3: spi@ff350000 { - compatible = "rockchip,rk3399-spi", "rockchip,rk3066-spi"; - reg = <0x0 0xff350000 0x0 0x1000>; - clocks = <&pmucru SCLK_SPI3_PMU>, <&pmucru PCLK_SPI3_PMU>; - clock-names = "spiclk", "apb_pclk"; - interrupts = ; - pinctrl-names = "default"; - pinctrl-0 = <&spi3_clk &spi3_tx &spi3_rx &spi3_cs0>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - uart4: serial@ff370000 { - compatible = "rockchip,rk3399-uart", "snps,dw-apb-uart"; - reg = <0x0 0xff370000 0x0 0x100>; - clocks = <&pmucru SCLK_UART4_PMU>, <&pmucru PCLK_UART4_PMU>; - clock-names = "baudclk", "apb_pclk"; - interrupts = ; - reg-shift = <2>; - reg-io-width = <4>; - pinctrl-names = "default"; - pinctrl-0 = <&uart4_xfer>; - status = "disabled"; - }; - - i2c0: i2c@ff3c0000 { - compatible = "rockchip,rk3399-i2c"; - reg = <0x0 0xff3c0000 0x0 0x1000>; - assigned-clocks = <&pmucru SCLK_I2C0_PMU>; - assigned-clock-rates = <200000000>; - clocks = <&pmucru SCLK_I2C0_PMU>, <&pmucru PCLK_I2C0_PMU>; - clock-names = "i2c", "pclk"; - interrupts = ; - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_xfer>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - i2c4: i2c@ff3d0000 { - compatible = "rockchip,rk3399-i2c"; - reg = <0x0 0xff3d0000 0x0 0x1000>; - assigned-clocks = <&pmucru SCLK_I2C4_PMU>; - assigned-clock-rates = <200000000>; - clocks = <&pmucru SCLK_I2C4_PMU>, <&pmucru PCLK_I2C4_PMU>; - clock-names = "i2c", "pclk"; - interrupts = ; - pinctrl-names = "default"; - pinctrl-0 = <&i2c4_xfer>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - i2c8: i2c@ff3e0000 { - compatible = "rockchip,rk3399-i2c"; - reg = <0x0 0xff3e0000 0x0 0x1000>; - assigned-clocks = <&pmucru SCLK_I2C8_PMU>; - assigned-clock-rates = <200000000>; - clocks = <&pmucru SCLK_I2C8_PMU>, <&pmucru PCLK_I2C8_PMU>; - clock-names = "i2c", "pclk"; - interrupts = ; - pinctrl-names = "default"; - pinctrl-0 = <&i2c8_xfer>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - pwm0: pwm@ff420000 { - compatible = "rockchip,rk3399-pwm", "rockchip,rk3288-pwm"; - reg = <0x0 0xff420000 0x0 0x10>; - #pwm-cells = <3>; - pinctrl-names = "default"; - pinctrl-0 = <&pwm0_pin>; - clocks = <&pmucru PCLK_RKPWM_PMU>; - status = "disabled"; - }; - - pwm1: pwm@ff420010 { - compatible = "rockchip,rk3399-pwm", "rockchip,rk3288-pwm"; - reg = <0x0 0xff420010 0x0 0x10>; - #pwm-cells = <3>; - pinctrl-names = "default"; - pinctrl-0 = <&pwm1_pin>; - clocks = <&pmucru PCLK_RKPWM_PMU>; - status = "disabled"; - }; - - pwm2: pwm@ff420020 { - compatible = "rockchip,rk3399-pwm", "rockchip,rk3288-pwm"; - reg = <0x0 0xff420020 0x0 0x10>; - #pwm-cells = <3>; - pinctrl-names = "default"; - pinctrl-0 = <&pwm2_pin>; - clocks = <&pmucru PCLK_RKPWM_PMU>; - status = "disabled"; - }; - - pwm3: pwm@ff420030 { - compatible = "rockchip,rk3399-pwm", "rockchip,rk3288-pwm"; - reg = <0x0 0xff420030 0x0 0x10>; - #pwm-cells = <3>; - pinctrl-names = "default"; - pinctrl-0 = <&pwm3a_pin>; - clocks = <&pmucru PCLK_RKPWM_PMU>; - status = "disabled"; - }; - - dfi: dfi@ff630000 { - reg = <0x00 0xff630000 0x00 0x4000>; - compatible = "rockchip,rk3399-dfi"; - rockchip,pmu = <&pmugrf>; - interrupts = ; - clocks = <&cru PCLK_DDR_MON>; - clock-names = "pclk_ddr_mon"; - }; - - vpu: video-codec@ff650000 { - compatible = "rockchip,rk3399-vpu"; - reg = <0x0 0xff650000 0x0 0x800>; - interrupts = , - ; - interrupt-names = "vepu", "vdpu"; - clocks = <&cru ACLK_VCODEC>, <&cru HCLK_VCODEC>; - clock-names = "aclk", "hclk"; - iommus = <&vpu_mmu>; - power-domains = <&power RK3399_PD_VCODEC>; - }; - - vpu_mmu: iommu@ff650800 { - compatible = "rockchip,iommu"; - reg = <0x0 0xff650800 0x0 0x40>; - interrupts = ; - clocks = <&cru ACLK_VCODEC>, <&cru HCLK_VCODEC>; - clock-names = "aclk", "iface"; - #iommu-cells = <0>; - power-domains = <&power RK3399_PD_VCODEC>; - }; - - vdec: video-codec@ff660000 { - compatible = "rockchip,rk3399-vdec"; - reg = <0x0 0xff660000 0x0 0x480>; - interrupts = ; - clocks = <&cru ACLK_VDU>, <&cru HCLK_VDU>, - <&cru SCLK_VDU_CA>, <&cru SCLK_VDU_CORE>; - clock-names = "axi", "ahb", "cabac", "core"; - iommus = <&vdec_mmu>; - power-domains = <&power RK3399_PD_VDU>; - }; - - vdec_mmu: iommu@ff660480 { - compatible = "rockchip,iommu"; - reg = <0x0 0xff660480 0x0 0x40>, <0x0 0xff6604c0 0x0 0x40>; - interrupts = ; - clocks = <&cru ACLK_VDU>, <&cru HCLK_VDU>; - clock-names = "aclk", "iface"; - power-domains = <&power RK3399_PD_VDU>; - #iommu-cells = <0>; - }; - - iep_mmu: iommu@ff670800 { - compatible = "rockchip,iommu"; - reg = <0x0 0xff670800 0x0 0x40>; - interrupts = ; - clocks = <&cru ACLK_IEP>, <&cru HCLK_IEP>; - clock-names = "aclk", "iface"; - #iommu-cells = <0>; - status = "disabled"; - }; - - rga: rga@ff680000 { - compatible = "rockchip,rk3399-rga"; - reg = <0x0 0xff680000 0x0 0x10000>; - interrupts = ; - clocks = <&cru ACLK_RGA>, <&cru HCLK_RGA>, <&cru SCLK_RGA_CORE>; - clock-names = "aclk", "hclk", "sclk"; - resets = <&cru SRST_RGA_CORE>, <&cru SRST_A_RGA>, <&cru SRST_H_RGA>; - reset-names = "core", "axi", "ahb"; - power-domains = <&power RK3399_PD_RGA>; - }; - - efuse0: efuse@ff690000 { - compatible = "rockchip,rk3399-efuse"; - reg = <0x0 0xff690000 0x0 0x80>; - #address-cells = <1>; - #size-cells = <1>; - clocks = <&cru PCLK_EFUSE1024NS>; - clock-names = "pclk_efuse"; - - /* Data cells */ - cpu_id: cpu-id@7 { - reg = <0x07 0x10>; - }; - cpub_leakage: cpu-leakage@17 { - reg = <0x17 0x1>; - }; - gpu_leakage: gpu-leakage@18 { - reg = <0x18 0x1>; - }; - center_leakage: center-leakage@19 { - reg = <0x19 0x1>; - }; - cpul_leakage: cpu-leakage@1a { - reg = <0x1a 0x1>; - }; - logic_leakage: logic-leakage@1b { - reg = <0x1b 0x1>; - }; - wafer_info: wafer-info@1c { - reg = <0x1c 0x1>; - }; - }; - - dmac_bus: dma-controller@ff6d0000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x0 0xff6d0000 0x0 0x4000>; - interrupts = , - ; - #dma-cells = <1>; - arm,pl330-periph-burst; - clocks = <&cru ACLK_DMAC0_PERILP>; - clock-names = "apb_pclk"; - }; - - dmac_peri: dma-controller@ff6e0000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x0 0xff6e0000 0x0 0x4000>; - interrupts = , - ; - #dma-cells = <1>; - arm,pl330-periph-burst; - clocks = <&cru ACLK_DMAC1_PERILP>; - clock-names = "apb_pclk"; - }; - - pmucru: clock-controller@ff750000 { - compatible = "rockchip,rk3399-pmucru"; - reg = <0x0 0xff750000 0x0 0x1000>; - clocks = <&xin24m>; - clock-names = "xin24m"; - rockchip,grf = <&pmugrf>; - #clock-cells = <1>; - #reset-cells = <1>; - assigned-clocks = <&pmucru PLL_PPLL>; - assigned-clock-rates = <676000000>; - }; - - cru: clock-controller@ff760000 { - compatible = "rockchip,rk3399-cru"; - reg = <0x0 0xff760000 0x0 0x1000>; - clocks = <&xin24m>; - clock-names = "xin24m"; - rockchip,grf = <&grf>; - #clock-cells = <1>; - #reset-cells = <1>; - assigned-clocks = - <&cru PLL_GPLL>, <&cru PLL_CPLL>, - <&cru PLL_NPLL>, - <&cru ACLK_PERIHP>, <&cru HCLK_PERIHP>, - <&cru PCLK_PERIHP>, - <&cru ACLK_PERILP0>, <&cru HCLK_PERILP0>, - <&cru PCLK_PERILP0>, <&cru ACLK_CCI>, - <&cru HCLK_PERILP1>, <&cru PCLK_PERILP1>, - <&cru ACLK_VIO>, <&cru ACLK_HDCP>, - <&cru ACLK_GIC_PRE>, - <&cru PCLK_DDR>, - <&cru ACLK_VDU>; - assigned-clock-rates = - <594000000>, <800000000>, - <1000000000>, - <150000000>, <75000000>, - <37500000>, - <100000000>, <100000000>, - <50000000>, <600000000>, - <100000000>, <50000000>, - <400000000>, <400000000>, - <200000000>, - <200000000>, - <400000000>; - }; - - grf: syscon@ff770000 { - compatible = "rockchip,rk3399-grf", "syscon", "simple-mfd"; - reg = <0x0 0xff770000 0x0 0x10000>; - #address-cells = <1>; - #size-cells = <1>; - - io_domains: io-domains { - compatible = "rockchip,rk3399-io-voltage-domain"; - status = "disabled"; - }; - - mipi_dphy_rx0: mipi-dphy-rx0 { - compatible = "rockchip,rk3399-mipi-dphy-rx0"; - clocks = <&cru SCLK_MIPIDPHY_REF>, - <&cru SCLK_DPHY_RX0_CFG>, - <&cru PCLK_VIO_GRF>; - clock-names = "dphy-ref", "dphy-cfg", "grf"; - power-domains = <&power RK3399_PD_VIO>; - #phy-cells = <0>; - status = "disabled"; - }; - - u2phy0: usb2phy@e450 { - compatible = "rockchip,rk3399-usb2phy"; - reg = <0xe450 0x10>; - clocks = <&cru SCLK_USB2PHY0_REF>; - clock-names = "phyclk"; - #clock-cells = <0>; - clock-output-names = "clk_usbphy0_480m"; - status = "disabled"; - - u2phy0_host: host-port { - #phy-cells = <0>; - interrupts = ; - interrupt-names = "linestate"; - status = "disabled"; - }; - - u2phy0_otg: otg-port { - #phy-cells = <0>; - interrupts = , - , - ; - interrupt-names = "otg-bvalid", "otg-id", - "linestate"; - status = "disabled"; - }; - }; - - u2phy1: usb2phy@e460 { - compatible = "rockchip,rk3399-usb2phy"; - reg = <0xe460 0x10>; - clocks = <&cru SCLK_USB2PHY1_REF>; - clock-names = "phyclk"; - #clock-cells = <0>; - clock-output-names = "clk_usbphy1_480m"; - status = "disabled"; - - u2phy1_host: host-port { - #phy-cells = <0>; - interrupts = ; - interrupt-names = "linestate"; - status = "disabled"; - }; - - u2phy1_otg: otg-port { - #phy-cells = <0>; - interrupts = , - , - ; - interrupt-names = "otg-bvalid", "otg-id", - "linestate"; - status = "disabled"; - }; - }; - - emmc_phy: phy@f780 { - compatible = "rockchip,rk3399-emmc-phy"; - reg = <0xf780 0x24>; - clocks = <&sdhci>; - clock-names = "emmcclk"; - drive-impedance-ohm = <50>; - #phy-cells = <0>; - status = "disabled"; - }; - - pcie_phy: pcie-phy { - compatible = "rockchip,rk3399-pcie-phy"; - clocks = <&cru SCLK_PCIEPHY_REF>; - clock-names = "refclk"; - #phy-cells = <1>; - resets = <&cru SRST_PCIEPHY>; - reset-names = "phy"; - status = "disabled"; - }; - }; - - tcphy0: phy@ff7c0000 { - compatible = "rockchip,rk3399-typec-phy"; - reg = <0x0 0xff7c0000 0x0 0x40000>; - clocks = <&cru SCLK_UPHY0_TCPDCORE>, - <&cru SCLK_UPHY0_TCPDPHY_REF>; - clock-names = "tcpdcore", "tcpdphy-ref"; - assigned-clocks = <&cru SCLK_UPHY0_TCPDCORE>; - assigned-clock-rates = <50000000>; - power-domains = <&power RK3399_PD_TCPD0>; - resets = <&cru SRST_UPHY0>, - <&cru SRST_UPHY0_PIPE_L00>, - <&cru SRST_P_UPHY0_TCPHY>; - reset-names = "uphy", "uphy-pipe", "uphy-tcphy"; - rockchip,grf = <&grf>; - status = "disabled"; - - tcphy0_dp: dp-port { - #phy-cells = <0>; - }; - - tcphy0_usb3: usb3-port { - #phy-cells = <0>; - }; - }; - - tcphy1: phy@ff800000 { - compatible = "rockchip,rk3399-typec-phy"; - reg = <0x0 0xff800000 0x0 0x40000>; - clocks = <&cru SCLK_UPHY1_TCPDCORE>, - <&cru SCLK_UPHY1_TCPDPHY_REF>; - clock-names = "tcpdcore", "tcpdphy-ref"; - assigned-clocks = <&cru SCLK_UPHY1_TCPDCORE>; - assigned-clock-rates = <50000000>; - power-domains = <&power RK3399_PD_TCPD1>; - resets = <&cru SRST_UPHY1>, - <&cru SRST_UPHY1_PIPE_L00>, - <&cru SRST_P_UPHY1_TCPHY>; - reset-names = "uphy", "uphy-pipe", "uphy-tcphy"; - rockchip,grf = <&grf>; - status = "disabled"; - - tcphy1_dp: dp-port { - #phy-cells = <0>; - }; - - tcphy1_usb3: usb3-port { - #phy-cells = <0>; - }; - }; - - watchdog@ff848000 { - compatible = "rockchip,rk3399-wdt", "snps,dw-wdt"; - reg = <0x0 0xff848000 0x0 0x100>; - clocks = <&cru PCLK_WDT>; - interrupts = ; - }; - - rktimer: rktimer@ff850000 { - compatible = "rockchip,rk3399-timer"; - reg = <0x0 0xff850000 0x0 0x1000>; - interrupts = ; - clocks = <&cru PCLK_TIMER0>, <&cru SCLK_TIMER00>; - clock-names = "pclk", "timer"; - }; - - spdif: spdif@ff870000 { - compatible = "rockchip,rk3399-spdif"; - reg = <0x0 0xff870000 0x0 0x1000>; - interrupts = ; - dmas = <&dmac_bus 7>; - dma-names = "tx"; - clock-names = "mclk", "hclk"; - clocks = <&cru SCLK_SPDIF_8CH>, <&cru HCLK_SPDIF>; - pinctrl-names = "default"; - pinctrl-0 = <&spdif_bus>; - power-domains = <&power RK3399_PD_SDIOAUDIO>; - #sound-dai-cells = <0>; - status = "disabled"; - }; - - i2s0: i2s@ff880000 { - compatible = "rockchip,rk3399-i2s", "rockchip,rk3066-i2s"; - reg = <0x0 0xff880000 0x0 0x1000>; - rockchip,grf = <&grf>; - interrupts = ; - dmas = <&dmac_bus 0>, <&dmac_bus 1>; - dma-names = "tx", "rx"; - clock-names = "i2s_clk", "i2s_hclk"; - clocks = <&cru SCLK_I2S0_8CH>, <&cru HCLK_I2S0_8CH>; - pinctrl-names = "bclk_on", "bclk_off"; - pinctrl-0 = <&i2s0_8ch_bus>; - pinctrl-1 = <&i2s0_8ch_bus_bclk_off>; - power-domains = <&power RK3399_PD_SDIOAUDIO>; - #sound-dai-cells = <0>; - status = "disabled"; - }; - - i2s1: i2s@ff890000 { - compatible = "rockchip,rk3399-i2s", "rockchip,rk3066-i2s"; - reg = <0x0 0xff890000 0x0 0x1000>; - interrupts = ; - dmas = <&dmac_bus 2>, <&dmac_bus 3>; - dma-names = "tx", "rx"; - clock-names = "i2s_clk", "i2s_hclk"; - clocks = <&cru SCLK_I2S1_8CH>, <&cru HCLK_I2S1_8CH>; - pinctrl-names = "default"; - pinctrl-0 = <&i2s1_2ch_bus>; - power-domains = <&power RK3399_PD_SDIOAUDIO>; - #sound-dai-cells = <0>; - status = "disabled"; - }; - - i2s2: i2s@ff8a0000 { - compatible = "rockchip,rk3399-i2s", "rockchip,rk3066-i2s"; - reg = <0x0 0xff8a0000 0x0 0x1000>; - interrupts = ; - dmas = <&dmac_bus 4>, <&dmac_bus 5>; - dma-names = "tx", "rx"; - clock-names = "i2s_clk", "i2s_hclk"; - clocks = <&cru SCLK_I2S2_8CH>, <&cru HCLK_I2S2_8CH>; - power-domains = <&power RK3399_PD_SDIOAUDIO>; - #sound-dai-cells = <0>; - status = "disabled"; - }; - - vopl: vop@ff8f0000 { - compatible = "rockchip,rk3399-vop-lit"; - reg = <0x0 0xff8f0000 0x0 0x2000>, <0x0 0xff8f2000 0x0 0x400>; - interrupts = ; - assigned-clocks = <&cru ACLK_VOP1>, <&cru HCLK_VOP1>; - assigned-clock-rates = <400000000>, <100000000>; - clocks = <&cru ACLK_VOP1>, <&cru DCLK_VOP1>, <&cru HCLK_VOP1>; - clock-names = "aclk_vop", "dclk_vop", "hclk_vop"; - iommus = <&vopl_mmu>; - power-domains = <&power RK3399_PD_VOPL>; - resets = <&cru SRST_A_VOP1>, <&cru SRST_H_VOP1>, <&cru SRST_D_VOP1>; - reset-names = "axi", "ahb", "dclk"; - status = "disabled"; - - vopl_out: port { - #address-cells = <1>; - #size-cells = <0>; - - vopl_out_mipi: endpoint@0 { - reg = <0>; - remote-endpoint = <&mipi_in_vopl>; - }; - - vopl_out_edp: endpoint@1 { - reg = <1>; - remote-endpoint = <&edp_in_vopl>; - }; - - vopl_out_hdmi: endpoint@2 { - reg = <2>; - remote-endpoint = <&hdmi_in_vopl>; - }; - - vopl_out_mipi1: endpoint@3 { - reg = <3>; - remote-endpoint = <&mipi1_in_vopl>; - }; - - vopl_out_dp: endpoint@4 { - reg = <4>; - remote-endpoint = <&dp_in_vopl>; - }; - }; - }; - - vopl_mmu: iommu@ff8f3f00 { - compatible = "rockchip,iommu"; - reg = <0x0 0xff8f3f00 0x0 0x100>; - interrupts = ; - clocks = <&cru ACLK_VOP1>, <&cru HCLK_VOP1>; - clock-names = "aclk", "iface"; - power-domains = <&power RK3399_PD_VOPL>; - #iommu-cells = <0>; - status = "disabled"; - }; - - vopb: vop@ff900000 { - compatible = "rockchip,rk3399-vop-big"; - reg = <0x0 0xff900000 0x0 0x2000>, <0x0 0xff902000 0x0 0x1000>; - interrupts = ; - assigned-clocks = <&cru ACLK_VOP0>, <&cru HCLK_VOP0>; - assigned-clock-rates = <400000000>, <100000000>; - clocks = <&cru ACLK_VOP0>, <&cru DCLK_VOP0>, <&cru HCLK_VOP0>; - clock-names = "aclk_vop", "dclk_vop", "hclk_vop"; - iommus = <&vopb_mmu>; - power-domains = <&power RK3399_PD_VOPB>; - resets = <&cru SRST_A_VOP0>, <&cru SRST_H_VOP0>, <&cru SRST_D_VOP0>; - reset-names = "axi", "ahb", "dclk"; - status = "disabled"; - - vopb_out: port { - #address-cells = <1>; - #size-cells = <0>; - - vopb_out_edp: endpoint@0 { - reg = <0>; - remote-endpoint = <&edp_in_vopb>; - }; - - vopb_out_mipi: endpoint@1 { - reg = <1>; - remote-endpoint = <&mipi_in_vopb>; - }; - - vopb_out_hdmi: endpoint@2 { - reg = <2>; - remote-endpoint = <&hdmi_in_vopb>; - }; - - vopb_out_mipi1: endpoint@3 { - reg = <3>; - remote-endpoint = <&mipi1_in_vopb>; - }; - - vopb_out_dp: endpoint@4 { - reg = <4>; - remote-endpoint = <&dp_in_vopb>; - }; - }; - }; - - vopb_mmu: iommu@ff903f00 { - compatible = "rockchip,iommu"; - reg = <0x0 0xff903f00 0x0 0x100>; - interrupts = ; - clocks = <&cru ACLK_VOP0>, <&cru HCLK_VOP0>; - clock-names = "aclk", "iface"; - power-domains = <&power RK3399_PD_VOPB>; - #iommu-cells = <0>; - status = "disabled"; - }; - - isp0: isp0@ff910000 { - compatible = "rockchip,rk3399-cif-isp"; - reg = <0x0 0xff910000 0x0 0x4000>; - interrupts = ; - clocks = <&cru SCLK_ISP0>, - <&cru ACLK_ISP0_WRAPPER>, - <&cru HCLK_ISP0_WRAPPER>; - clock-names = "isp", "aclk", "hclk"; - iommus = <&isp0_mmu>; - phys = <&mipi_dphy_rx0>; - phy-names = "dphy"; - power-domains = <&power RK3399_PD_ISP0>; - status = "disabled"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - #address-cells = <1>; - #size-cells = <0>; - }; - }; - }; - - isp0_mmu: iommu@ff914000 { - compatible = "rockchip,iommu"; - reg = <0x0 0xff914000 0x0 0x100>, <0x0 0xff915000 0x0 0x100>; - interrupts = ; - clocks = <&cru ACLK_ISP0_WRAPPER>, <&cru HCLK_ISP0_WRAPPER>; - clock-names = "aclk", "iface"; - #iommu-cells = <0>; - power-domains = <&power RK3399_PD_ISP0>; - rockchip,disable-mmu-reset; - }; - - isp1: isp1@ff920000 { - compatible = "rockchip,rk3399-cif-isp"; - reg = <0x0 0xff920000 0x0 0x4000>; - interrupts = ; - clocks = <&cru SCLK_ISP1>, - <&cru ACLK_ISP1_WRAPPER>, - <&cru HCLK_ISP1_WRAPPER>; - clock-names = "isp", "aclk", "hclk"; - iommus = <&isp1_mmu>; - phys = <&mipi_dsi1>; - phy-names = "dphy"; - power-domains = <&power RK3399_PD_ISP1>; - status = "disabled"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - #address-cells = <1>; - #size-cells = <0>; - }; - }; - }; - - isp1_mmu: iommu@ff924000 { - compatible = "rockchip,iommu"; - reg = <0x0 0xff924000 0x0 0x100>, <0x0 0xff925000 0x0 0x100>; - interrupts = ; - clocks = <&cru ACLK_ISP1_WRAPPER>, <&cru HCLK_ISP1_WRAPPER>; - clock-names = "aclk", "iface"; - #iommu-cells = <0>; - power-domains = <&power RK3399_PD_ISP1>; - rockchip,disable-mmu-reset; - }; - - hdmi_sound: hdmi-sound { - compatible = "simple-audio-card"; - simple-audio-card,format = "i2s"; - simple-audio-card,mclk-fs = <256>; - simple-audio-card,name = "hdmi-sound"; - status = "disabled"; - - simple-audio-card,cpu { - sound-dai = <&i2s2>; - }; - simple-audio-card,codec { - sound-dai = <&hdmi>; - }; - }; - - hdmi: hdmi@ff940000 { - compatible = "rockchip,rk3399-dw-hdmi"; - reg = <0x0 0xff940000 0x0 0x20000>; - interrupts = ; - clocks = <&cru PCLK_HDMI_CTRL>, - <&cru SCLK_HDMI_SFR>, - <&cru SCLK_HDMI_CEC>, - <&cru PCLK_VIO_GRF>, - <&cru PLL_VPLL>; - clock-names = "iahb", "isfr", "cec", "grf", "ref"; - power-domains = <&power RK3399_PD_HDCP>; - reg-io-width = <4>; - rockchip,grf = <&grf>; - #sound-dai-cells = <0>; - status = "disabled"; - - ports { - hdmi_in: port { - #address-cells = <1>; - #size-cells = <0>; - - hdmi_in_vopb: endpoint@0 { - reg = <0>; - remote-endpoint = <&vopb_out_hdmi>; - }; - hdmi_in_vopl: endpoint@1 { - reg = <1>; - remote-endpoint = <&vopl_out_hdmi>; - }; - }; - }; - }; - - mipi_dsi: dsi@ff960000 { - compatible = "rockchip,rk3399-mipi-dsi", "snps,dw-mipi-dsi"; - reg = <0x0 0xff960000 0x0 0x8000>; - interrupts = ; - clocks = <&cru SCLK_DPHY_PLL>, <&cru PCLK_MIPI_DSI0>, - <&cru SCLK_DPHY_TX0_CFG>, <&cru PCLK_VIO_GRF>; - clock-names = "ref", "pclk", "phy_cfg", "grf"; - power-domains = <&power RK3399_PD_VIO>; - resets = <&cru SRST_P_MIPI_DSI0>; - reset-names = "apb"; - rockchip,grf = <&grf>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - mipi_in: port@0 { - reg = <0>; - #address-cells = <1>; - #size-cells = <0>; - - mipi_in_vopb: endpoint@0 { - reg = <0>; - remote-endpoint = <&vopb_out_mipi>; - }; - - mipi_in_vopl: endpoint@1 { - reg = <1>; - remote-endpoint = <&vopl_out_mipi>; - }; - }; - - mipi_out: port@1 { - reg = <1>; - }; - }; - }; - - mipi_dsi1: dsi@ff968000 { - compatible = "rockchip,rk3399-mipi-dsi", "snps,dw-mipi-dsi"; - reg = <0x0 0xff968000 0x0 0x8000>; - interrupts = ; - clocks = <&cru SCLK_DPHY_PLL>, <&cru PCLK_MIPI_DSI1>, - <&cru SCLK_DPHY_TX1RX1_CFG>, <&cru PCLK_VIO_GRF>; - clock-names = "ref", "pclk", "phy_cfg", "grf"; - power-domains = <&power RK3399_PD_VIO>; - resets = <&cru SRST_P_MIPI_DSI1>; - reset-names = "apb"; - rockchip,grf = <&grf>; - #address-cells = <1>; - #size-cells = <0>; - #phy-cells = <0>; - status = "disabled"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - mipi1_in: port@0 { - reg = <0>; - #address-cells = <1>; - #size-cells = <0>; - - mipi1_in_vopb: endpoint@0 { - reg = <0>; - remote-endpoint = <&vopb_out_mipi1>; - }; - - mipi1_in_vopl: endpoint@1 { - reg = <1>; - remote-endpoint = <&vopl_out_mipi1>; - }; - }; - - mipi1_out: port@1 { - reg = <1>; - }; - }; - }; - - edp: dp@ff970000 { - compatible = "rockchip,rk3399-edp"; - reg = <0x0 0xff970000 0x0 0x8000>; - interrupts = ; - clocks = <&cru PCLK_EDP>, <&cru PCLK_EDP_CTRL>, <&cru PCLK_VIO_GRF>; - clock-names = "dp", "pclk", "grf"; - pinctrl-names = "default"; - pinctrl-0 = <&edp_hpd>; - power-domains = <&power RK3399_PD_EDP>; - resets = <&cru SRST_P_EDP_CTRL>; - reset-names = "dp"; - rockchip,grf = <&grf>; - status = "disabled"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - edp_in: port@0 { - reg = <0>; - #address-cells = <1>; - #size-cells = <0>; - - edp_in_vopb: endpoint@0 { - reg = <0>; - remote-endpoint = <&vopb_out_edp>; - }; - - edp_in_vopl: endpoint@1 { - reg = <1>; - remote-endpoint = <&vopl_out_edp>; - }; - }; - - edp_out: port@1 { - reg = <1>; - }; - }; - }; - - gpu: gpu@ff9a0000 { - compatible = "rockchip,rk3399-mali", "arm,mali-t860"; - reg = <0x0 0xff9a0000 0x0 0x10000>; - interrupts = , - , - ; - interrupt-names = "job", "mmu", "gpu"; - clocks = <&cru ACLK_GPU>; - #cooling-cells = <2>; - dynamic-power-coefficient = <2640>; - power-domains = <&power RK3399_PD_GPU>; - status = "disabled"; - }; - - pinctrl: pinctrl { - compatible = "rockchip,rk3399-pinctrl"; - rockchip,grf = <&grf>; - rockchip,pmu = <&pmugrf>; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - gpio0: gpio@ff720000 { - compatible = "rockchip,gpio-bank"; - reg = <0x0 0xff720000 0x0 0x100>; - clocks = <&pmucru PCLK_GPIO0_PMU>; - interrupts = ; - - gpio-controller; - #gpio-cells = <0x2>; - - interrupt-controller; - #interrupt-cells = <0x2>; - }; - - gpio1: gpio@ff730000 { - compatible = "rockchip,gpio-bank"; - reg = <0x0 0xff730000 0x0 0x100>; - clocks = <&pmucru PCLK_GPIO1_PMU>; - interrupts = ; - - gpio-controller; - #gpio-cells = <0x2>; - - interrupt-controller; - #interrupt-cells = <0x2>; - }; - - gpio2: gpio@ff780000 { - compatible = "rockchip,gpio-bank"; - reg = <0x0 0xff780000 0x0 0x100>; - clocks = <&cru PCLK_GPIO2>; - interrupts = ; - - gpio-controller; - #gpio-cells = <0x2>; - - interrupt-controller; - #interrupt-cells = <0x2>; - }; - - gpio3: gpio@ff788000 { - compatible = "rockchip,gpio-bank"; - reg = <0x0 0xff788000 0x0 0x100>; - clocks = <&cru PCLK_GPIO3>; - interrupts = ; - - gpio-controller; - #gpio-cells = <0x2>; - - interrupt-controller; - #interrupt-cells = <0x2>; - }; - - gpio4: gpio@ff790000 { - compatible = "rockchip,gpio-bank"; - reg = <0x0 0xff790000 0x0 0x100>; - clocks = <&cru PCLK_GPIO4>; - interrupts = ; - - gpio-controller; - #gpio-cells = <0x2>; - - interrupt-controller; - #interrupt-cells = <0x2>; - }; - - pcfg_pull_up: pcfg-pull-up { - bias-pull-up; - }; - - pcfg_pull_down: pcfg-pull-down { - bias-pull-down; - }; - - pcfg_pull_none: pcfg-pull-none { - bias-disable; - }; - - pcfg_pull_none_12ma: pcfg-pull-none-12ma { - bias-disable; - drive-strength = <12>; - }; - - pcfg_pull_none_13ma: pcfg-pull-none-13ma { - bias-disable; - drive-strength = <13>; - }; - - pcfg_pull_none_18ma: pcfg-pull-none-18ma { - bias-disable; - drive-strength = <18>; - }; - - pcfg_pull_none_20ma: pcfg-pull-none-20ma { - bias-disable; - drive-strength = <20>; - }; - - pcfg_pull_up_2ma: pcfg-pull-up-2ma { - bias-pull-up; - drive-strength = <2>; - }; - - pcfg_pull_up_8ma: pcfg-pull-up-8ma { - bias-pull-up; - drive-strength = <8>; - }; - - pcfg_pull_up_18ma: pcfg-pull-up-18ma { - bias-pull-up; - drive-strength = <18>; - }; - - pcfg_pull_up_20ma: pcfg-pull-up-20ma { - bias-pull-up; - drive-strength = <20>; - }; - - pcfg_pull_down_4ma: pcfg-pull-down-4ma { - bias-pull-down; - drive-strength = <4>; - }; - - pcfg_pull_down_8ma: pcfg-pull-down-8ma { - bias-pull-down; - drive-strength = <8>; - }; - - pcfg_pull_down_12ma: pcfg-pull-down-12ma { - bias-pull-down; - drive-strength = <12>; - }; - - pcfg_pull_down_18ma: pcfg-pull-down-18ma { - bias-pull-down; - drive-strength = <18>; - }; - - pcfg_pull_down_20ma: pcfg-pull-down-20ma { - bias-pull-down; - drive-strength = <20>; - }; - - pcfg_output_high: pcfg-output-high { - output-high; - }; - - pcfg_output_low: pcfg-output-low { - output-low; - }; - - pcfg_input_enable: pcfg-input-enable { - input-enable; - }; - - pcfg_input_pull_up: pcfg-input-pull-up { - input-enable; - bias-pull-up; - }; - - pcfg_input_pull_down: pcfg-input-pull-down { - input-enable; - bias-pull-down; - }; - - clock { - clk_32k: clk-32k { - rockchip,pins = <0 RK_PA0 2 &pcfg_pull_none>; - }; - }; - - cif { - cif_clkin: cif-clkin { - rockchip,pins = - <2 RK_PB2 3 &pcfg_pull_none>; - }; - - cif_clkouta: cif-clkouta { - rockchip,pins = - <2 RK_PB3 3 &pcfg_pull_none>; - }; - }; - - edp { - edp_hpd: edp-hpd { - rockchip,pins = - <4 RK_PC7 2 &pcfg_pull_none>; - }; - }; - - gmac { - rgmii_pins: rgmii-pins { - rockchip,pins = - /* mac_txclk */ - <3 RK_PC1 1 &pcfg_pull_none_13ma>, - /* mac_rxclk */ - <3 RK_PB6 1 &pcfg_pull_none>, - /* mac_mdio */ - <3 RK_PB5 1 &pcfg_pull_none>, - /* mac_txen */ - <3 RK_PB4 1 &pcfg_pull_none_13ma>, - /* mac_clk */ - <3 RK_PB3 1 &pcfg_pull_none>, - /* mac_rxdv */ - <3 RK_PB1 1 &pcfg_pull_none>, - /* mac_mdc */ - <3 RK_PB0 1 &pcfg_pull_none>, - /* mac_rxd1 */ - <3 RK_PA7 1 &pcfg_pull_none>, - /* mac_rxd0 */ - <3 RK_PA6 1 &pcfg_pull_none>, - /* mac_txd1 */ - <3 RK_PA5 1 &pcfg_pull_none_13ma>, - /* mac_txd0 */ - <3 RK_PA4 1 &pcfg_pull_none_13ma>, - /* mac_rxd3 */ - <3 RK_PA3 1 &pcfg_pull_none>, - /* mac_rxd2 */ - <3 RK_PA2 1 &pcfg_pull_none>, - /* mac_txd3 */ - <3 RK_PA1 1 &pcfg_pull_none_13ma>, - /* mac_txd2 */ - <3 RK_PA0 1 &pcfg_pull_none_13ma>; - }; - - rmii_pins: rmii-pins { - rockchip,pins = - /* mac_mdio */ - <3 RK_PB5 1 &pcfg_pull_none>, - /* mac_txen */ - <3 RK_PB4 1 &pcfg_pull_none_13ma>, - /* mac_clk */ - <3 RK_PB3 1 &pcfg_pull_none>, - /* mac_rxer */ - <3 RK_PB2 1 &pcfg_pull_none>, - /* mac_rxdv */ - <3 RK_PB1 1 &pcfg_pull_none>, - /* mac_mdc */ - <3 RK_PB0 1 &pcfg_pull_none>, - /* mac_rxd1 */ - <3 RK_PA7 1 &pcfg_pull_none>, - /* mac_rxd0 */ - <3 RK_PA6 1 &pcfg_pull_none>, - /* mac_txd1 */ - <3 RK_PA5 1 &pcfg_pull_none_13ma>, - /* mac_txd0 */ - <3 RK_PA4 1 &pcfg_pull_none_13ma>; - }; - }; - - i2c0 { - i2c0_xfer: i2c0-xfer { - rockchip,pins = - <1 RK_PB7 2 &pcfg_pull_none>, - <1 RK_PC0 2 &pcfg_pull_none>; - }; - }; - - i2c1 { - i2c1_xfer: i2c1-xfer { - rockchip,pins = - <4 RK_PA2 1 &pcfg_pull_none>, - <4 RK_PA1 1 &pcfg_pull_none>; - }; - }; - - i2c2 { - i2c2_xfer: i2c2-xfer { - rockchip,pins = - <2 RK_PA1 2 &pcfg_pull_none_12ma>, - <2 RK_PA0 2 &pcfg_pull_none_12ma>; - }; - }; - - i2c3 { - i2c3_xfer: i2c3-xfer { - rockchip,pins = - <4 RK_PC1 1 &pcfg_pull_none>, - <4 RK_PC0 1 &pcfg_pull_none>; - }; - }; - - i2c4 { - i2c4_xfer: i2c4-xfer { - rockchip,pins = - <1 RK_PB4 1 &pcfg_pull_none>, - <1 RK_PB3 1 &pcfg_pull_none>; - }; - }; - - i2c5 { - i2c5_xfer: i2c5-xfer { - rockchip,pins = - <3 RK_PB3 2 &pcfg_pull_none>, - <3 RK_PB2 2 &pcfg_pull_none>; - }; - }; - - i2c6 { - i2c6_xfer: i2c6-xfer { - rockchip,pins = - <2 RK_PB2 2 &pcfg_pull_none>, - <2 RK_PB1 2 &pcfg_pull_none>; - }; - }; - - i2c7 { - i2c7_xfer: i2c7-xfer { - rockchip,pins = - <2 RK_PB0 2 &pcfg_pull_none>, - <2 RK_PA7 2 &pcfg_pull_none>; - }; - }; - - i2c8 { - i2c8_xfer: i2c8-xfer { - rockchip,pins = - <1 RK_PC5 1 &pcfg_pull_none>, - <1 RK_PC4 1 &pcfg_pull_none>; - }; - }; - - i2s0 { - i2s0_2ch_bus: i2s0-2ch-bus { - rockchip,pins = - <3 RK_PD0 1 &pcfg_pull_none>, - <3 RK_PD1 1 &pcfg_pull_none>, - <3 RK_PD2 1 &pcfg_pull_none>, - <3 RK_PD3 1 &pcfg_pull_none>, - <3 RK_PD7 1 &pcfg_pull_none>, - <4 RK_PA0 1 &pcfg_pull_none>; - }; - - i2s0_2ch_bus_bclk_off: i2s0-2ch-bus-bclk-off { - rockchip,pins = - <3 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>, - <3 RK_PD1 1 &pcfg_pull_none>, - <3 RK_PD2 1 &pcfg_pull_none>, - <3 RK_PD3 1 &pcfg_pull_none>, - <3 RK_PD7 1 &pcfg_pull_none>, - <4 RK_PA0 1 &pcfg_pull_none>; - }; - - i2s0_8ch_bus: i2s0-8ch-bus { - rockchip,pins = - <3 RK_PD0 1 &pcfg_pull_none>, - <3 RK_PD1 1 &pcfg_pull_none>, - <3 RK_PD2 1 &pcfg_pull_none>, - <3 RK_PD3 1 &pcfg_pull_none>, - <3 RK_PD4 1 &pcfg_pull_none>, - <3 RK_PD5 1 &pcfg_pull_none>, - <3 RK_PD6 1 &pcfg_pull_none>, - <3 RK_PD7 1 &pcfg_pull_none>, - <4 RK_PA0 1 &pcfg_pull_none>; - }; - - i2s0_8ch_bus_bclk_off: i2s0-8ch-bus-bclk-off { - rockchip,pins = - <3 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>, - <3 RK_PD1 1 &pcfg_pull_none>, - <3 RK_PD2 1 &pcfg_pull_none>, - <3 RK_PD3 1 &pcfg_pull_none>, - <3 RK_PD4 1 &pcfg_pull_none>, - <3 RK_PD5 1 &pcfg_pull_none>, - <3 RK_PD6 1 &pcfg_pull_none>, - <3 RK_PD7 1 &pcfg_pull_none>, - <4 RK_PA0 1 &pcfg_pull_none>; - }; - }; - - i2s1 { - i2s1_2ch_bus: i2s1-2ch-bus { - rockchip,pins = - <4 RK_PA3 1 &pcfg_pull_none>, - <4 RK_PA4 1 &pcfg_pull_none>, - <4 RK_PA5 1 &pcfg_pull_none>, - <4 RK_PA6 1 &pcfg_pull_none>, - <4 RK_PA7 1 &pcfg_pull_none>; - }; - - i2s1_2ch_bus_bclk_off: i2s1-2ch-bus-bclk-off { - rockchip,pins = - <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>, - <4 RK_PA4 1 &pcfg_pull_none>, - <4 RK_PA5 1 &pcfg_pull_none>, - <4 RK_PA6 1 &pcfg_pull_none>, - <4 RK_PA7 1 &pcfg_pull_none>; - }; - }; - - sdio0 { - sdio0_bus1: sdio0-bus1 { - rockchip,pins = - <2 RK_PC4 1 &pcfg_pull_up>; - }; - - sdio0_bus4: sdio0-bus4 { - rockchip,pins = - <2 RK_PC4 1 &pcfg_pull_up>, - <2 RK_PC5 1 &pcfg_pull_up>, - <2 RK_PC6 1 &pcfg_pull_up>, - <2 RK_PC7 1 &pcfg_pull_up>; - }; - - sdio0_cmd: sdio0-cmd { - rockchip,pins = - <2 RK_PD0 1 &pcfg_pull_up>; - }; - - sdio0_clk: sdio0-clk { - rockchip,pins = - <2 RK_PD1 1 &pcfg_pull_none>; - }; - - sdio0_cd: sdio0-cd { - rockchip,pins = - <2 RK_PD2 1 &pcfg_pull_up>; - }; - - sdio0_pwr: sdio0-pwr { - rockchip,pins = - <2 RK_PD3 1 &pcfg_pull_up>; - }; - - sdio0_bkpwr: sdio0-bkpwr { - rockchip,pins = - <2 RK_PD4 1 &pcfg_pull_up>; - }; - - sdio0_wp: sdio0-wp { - rockchip,pins = - <0 RK_PA3 1 &pcfg_pull_up>; - }; - - sdio0_int: sdio0-int { - rockchip,pins = - <0 RK_PA4 1 &pcfg_pull_up>; - }; - }; - - sdmmc { - sdmmc_bus1: sdmmc-bus1 { - rockchip,pins = - <4 RK_PB0 1 &pcfg_pull_up>; - }; - - sdmmc_bus4: sdmmc-bus4 { - rockchip,pins = - <4 RK_PB0 1 &pcfg_pull_up>, - <4 RK_PB1 1 &pcfg_pull_up>, - <4 RK_PB2 1 &pcfg_pull_up>, - <4 RK_PB3 1 &pcfg_pull_up>; - }; - - sdmmc_clk: sdmmc-clk { - rockchip,pins = - <4 RK_PB4 1 &pcfg_pull_none>; - }; - - sdmmc_cmd: sdmmc-cmd { - rockchip,pins = - <4 RK_PB5 1 &pcfg_pull_up>; - }; - - sdmmc_cd: sdmmc-cd { - rockchip,pins = - <0 RK_PA7 1 &pcfg_pull_up>; - }; - - sdmmc_wp: sdmmc-wp { - rockchip,pins = - <0 RK_PB0 1 &pcfg_pull_up>; - }; - }; - - suspend { - ap_pwroff: ap-pwroff { - rockchip,pins = <1 RK_PA5 1 &pcfg_pull_none>; - }; - - ddrio_pwroff: ddrio-pwroff { - rockchip,pins = <0 RK_PA1 1 &pcfg_pull_none>; - }; - }; - - spdif { - spdif_bus: spdif-bus { - rockchip,pins = - <4 RK_PC5 1 &pcfg_pull_none>; - }; - - spdif_bus_1: spdif-bus-1 { - rockchip,pins = - <3 RK_PC0 3 &pcfg_pull_none>; - }; - }; - - spi0 { - spi0_clk: spi0-clk { - rockchip,pins = - <3 RK_PA6 2 &pcfg_pull_up>; - }; - spi0_cs0: spi0-cs0 { - rockchip,pins = - <3 RK_PA7 2 &pcfg_pull_up>; - }; - spi0_cs1: spi0-cs1 { - rockchip,pins = - <3 RK_PB0 2 &pcfg_pull_up>; - }; - spi0_tx: spi0-tx { - rockchip,pins = - <3 RK_PA5 2 &pcfg_pull_up>; - }; - spi0_rx: spi0-rx { - rockchip,pins = - <3 RK_PA4 2 &pcfg_pull_up>; - }; - }; - - spi1 { - spi1_clk: spi1-clk { - rockchip,pins = - <1 RK_PB1 2 &pcfg_pull_up>; - }; - spi1_cs0: spi1-cs0 { - rockchip,pins = - <1 RK_PB2 2 &pcfg_pull_up>; - }; - spi1_rx: spi1-rx { - rockchip,pins = - <1 RK_PA7 2 &pcfg_pull_up>; - }; - spi1_tx: spi1-tx { - rockchip,pins = - <1 RK_PB0 2 &pcfg_pull_up>; - }; - }; - - spi2 { - spi2_clk: spi2-clk { - rockchip,pins = - <2 RK_PB3 1 &pcfg_pull_up>; - }; - spi2_cs0: spi2-cs0 { - rockchip,pins = - <2 RK_PB4 1 &pcfg_pull_up>; - }; - spi2_rx: spi2-rx { - rockchip,pins = - <2 RK_PB1 1 &pcfg_pull_up>; - }; - spi2_tx: spi2-tx { - rockchip,pins = - <2 RK_PB2 1 &pcfg_pull_up>; - }; - }; - - spi3 { - spi3_clk: spi3-clk { - rockchip,pins = - <1 RK_PC1 1 &pcfg_pull_up>; - }; - spi3_cs0: spi3-cs0 { - rockchip,pins = - <1 RK_PC2 1 &pcfg_pull_up>; - }; - spi3_rx: spi3-rx { - rockchip,pins = - <1 RK_PB7 1 &pcfg_pull_up>; - }; - spi3_tx: spi3-tx { - rockchip,pins = - <1 RK_PC0 1 &pcfg_pull_up>; - }; - }; - - spi4 { - spi4_clk: spi4-clk { - rockchip,pins = - <3 RK_PA2 2 &pcfg_pull_up>; - }; - spi4_cs0: spi4-cs0 { - rockchip,pins = - <3 RK_PA3 2 &pcfg_pull_up>; - }; - spi4_rx: spi4-rx { - rockchip,pins = - <3 RK_PA0 2 &pcfg_pull_up>; - }; - spi4_tx: spi4-tx { - rockchip,pins = - <3 RK_PA1 2 &pcfg_pull_up>; - }; - }; - - spi5 { - spi5_clk: spi5-clk { - rockchip,pins = - <2 RK_PC6 2 &pcfg_pull_up>; - }; - spi5_cs0: spi5-cs0 { - rockchip,pins = - <2 RK_PC7 2 &pcfg_pull_up>; - }; - spi5_rx: spi5-rx { - rockchip,pins = - <2 RK_PC4 2 &pcfg_pull_up>; - }; - spi5_tx: spi5-tx { - rockchip,pins = - <2 RK_PC5 2 &pcfg_pull_up>; - }; - }; - - testclk { - test_clkout0: test-clkout0 { - rockchip,pins = - <0 RK_PA0 1 &pcfg_pull_none>; - }; - - test_clkout1: test-clkout1 { - rockchip,pins = - <2 RK_PD1 2 &pcfg_pull_none>; - }; - - test_clkout2: test-clkout2 { - rockchip,pins = - <0 RK_PB0 3 &pcfg_pull_none>; - }; - }; - - tsadc { - otp_pin: otp-pin { - rockchip,pins = <1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - otp_out: otp-out { - rockchip,pins = <1 RK_PA6 1 &pcfg_pull_none>; - }; - }; - - uart0 { - uart0_xfer: uart0-xfer { - rockchip,pins = - <2 RK_PC0 1 &pcfg_pull_up>, - <2 RK_PC1 1 &pcfg_pull_none>; - }; - - uart0_cts: uart0-cts { - rockchip,pins = - <2 RK_PC2 1 &pcfg_pull_none>; - }; - - uart0_rts: uart0-rts { - rockchip,pins = - <2 RK_PC3 1 &pcfg_pull_none>; - }; - }; - - uart1 { - uart1_xfer: uart1-xfer { - rockchip,pins = - <3 RK_PB4 2 &pcfg_pull_up>, - <3 RK_PB5 2 &pcfg_pull_none>; - }; - }; - - uart2a { - uart2a_xfer: uart2a-xfer { - rockchip,pins = - <4 RK_PB0 2 &pcfg_pull_up>, - <4 RK_PB1 2 &pcfg_pull_none>; - }; - }; - - uart2b { - uart2b_xfer: uart2b-xfer { - rockchip,pins = - <4 RK_PC0 2 &pcfg_pull_up>, - <4 RK_PC1 2 &pcfg_pull_none>; - }; - }; - - uart2c { - uart2c_xfer: uart2c-xfer { - rockchip,pins = - <4 RK_PC3 1 &pcfg_pull_up>, - <4 RK_PC4 1 &pcfg_pull_none>; - }; - }; - - uart3 { - uart3_xfer: uart3-xfer { - rockchip,pins = - <3 RK_PB6 2 &pcfg_pull_up>, - <3 RK_PB7 2 &pcfg_pull_none>; - }; - - uart3_cts: uart3-cts { - rockchip,pins = - <3 RK_PC0 2 &pcfg_pull_none>; - }; - - uart3_rts: uart3-rts { - rockchip,pins = - <3 RK_PC1 2 &pcfg_pull_none>; - }; - }; - - uart4 { - uart4_xfer: uart4-xfer { - rockchip,pins = - <1 RK_PA7 1 &pcfg_pull_up>, - <1 RK_PB0 1 &pcfg_pull_none>; - }; - }; - - uarthdcp { - uarthdcp_xfer: uarthdcp-xfer { - rockchip,pins = - <4 RK_PC5 2 &pcfg_pull_up>, - <4 RK_PC6 2 &pcfg_pull_none>; - }; - }; - - pwm0 { - pwm0_pin: pwm0-pin { - rockchip,pins = - <4 RK_PC2 1 &pcfg_pull_none>; - }; - - pwm0_pin_pull_down: pwm0-pin-pull-down { - rockchip,pins = - <4 RK_PC2 1 &pcfg_pull_down>; - }; - - vop0_pwm_pin: vop0-pwm-pin { - rockchip,pins = - <4 RK_PC2 2 &pcfg_pull_none>; - }; - - vop1_pwm_pin: vop1-pwm-pin { - rockchip,pins = - <4 RK_PC2 3 &pcfg_pull_none>; - }; - }; - - pwm1 { - pwm1_pin: pwm1-pin { - rockchip,pins = - <4 RK_PC6 1 &pcfg_pull_none>; - }; - - pwm1_pin_pull_down: pwm1-pin-pull-down { - rockchip,pins = - <4 RK_PC6 1 &pcfg_pull_down>; - }; - }; - - pwm2 { - pwm2_pin: pwm2-pin { - rockchip,pins = - <1 RK_PC3 1 &pcfg_pull_none>; - }; - - pwm2_pin_pull_down: pwm2-pin-pull-down { - rockchip,pins = - <1 RK_PC3 1 &pcfg_pull_down>; - }; - }; - - pwm3a { - pwm3a_pin: pwm3a-pin { - rockchip,pins = - <0 RK_PA6 1 &pcfg_pull_none>; - }; - }; - - pwm3b { - pwm3b_pin: pwm3b-pin { - rockchip,pins = - <1 RK_PB6 1 &pcfg_pull_none>; - }; - }; - - hdmi { - hdmi_i2c_xfer: hdmi-i2c-xfer { - rockchip,pins = - <4 RK_PC1 3 &pcfg_pull_none>, - <4 RK_PC0 3 &pcfg_pull_none>; - }; - - hdmi_cec: hdmi-cec { - rockchip,pins = - <4 RK_PC7 1 &pcfg_pull_none>; - }; - }; - - pcie { - pcie_clkreqn_cpm: pci-clkreqn-cpm { - rockchip,pins = - <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - pcie_clkreqnb_cpm: pci-clkreqnb-cpm { - rockchip,pins = - <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - }; -}; diff --git a/arch/arm/dts/rk3399pro-rock-pi-n10.dts b/arch/arm/dts/rk3399pro-rock-pi-n10.dts deleted file mode 100644 index bf026786fa92..000000000000 --- a/arch/arm/dts/rk3399pro-rock-pi-n10.dts +++ /dev/null @@ -1,22 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd - * Copyright (c) 2019 Radxa Limited - * Copyright (c) 2019 Amarula Solutions(India) - */ - -/dts-v1/; -#include "rk3399.dtsi" -#include "rk3399-opp.dtsi" -#include -#include "rk3399pro-vmarc-som.dtsi" - -/ { - model = "Radxa ROCK Pi N10"; - compatible = "radxa,rockpi-n10", "vamrs,rk3399pro-vmarc-som", - "rockchip,rk3399pro"; - - chosen { - stdout-path = "serial2:1500000n8"; - }; -}; diff --git a/arch/arm/dts/rk3399pro-vmarc-som.dtsi b/arch/arm/dts/rk3399pro-vmarc-som.dtsi deleted file mode 100644 index 8823c924dc1d..000000000000 --- a/arch/arm/dts/rk3399pro-vmarc-som.dtsi +++ /dev/null @@ -1,477 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd - * Copyright (c) 2019 Vamrs Limited - * Copyright (c) 2019 Amarula Solutions(India) - */ - -#include -#include -#include - -/ { - compatible = "vamrs,rk3399pro-vmarc-som", "rockchip,rk3399pro"; - - aliases { - ethernet0 = &gmac; - mmc0 = &sdhci; - mmc1 = &sdmmc; - }; - - vcc3v3_pcie: vcc-pcie-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio4 RK_PD4 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&pcie_pwr>; - regulator-name = "vcc3v3_pcie"; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vcc5v0_sys>; - }; -}; - -&cpu_l0 { - cpu-supply = <&vdd_cpu_l>; -}; - -&cpu_l1 { - cpu-supply = <&vdd_cpu_l>; -}; - -&cpu_l2 { - cpu-supply = <&vdd_cpu_l>; -}; - -&cpu_l3 { - cpu-supply = <&vdd_cpu_l>; -}; - -&emmc_phy { - status = "okay"; -}; - -&gmac { - assigned-clocks = <&cru SCLK_RMII_SRC>; - phy-supply = <&vcc_lan>; - snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; -}; - -&hdmi { - ddc-i2c-bus = <&i2c3>; - pinctrl-names = "default"; - pinctrl-0 = <&hdmi_cec>; -}; - -&i2c0 { - clock-frequency = <400000>; - i2c-scl-falling-time-ns = <30>; - i2c-scl-rising-time-ns = <180>; - status = "okay"; - - rk809: pmic@20 { - compatible = "rockchip,rk809"; - reg = <0x20>; - interrupt-parent = <&gpio1>; - interrupts = ; - #clock-cells = <1>; - clock-output-names = "rk808-clkout1", "rk808-clkout2"; - pinctrl-names = "default"; - pinctrl-0 = <&pmic_int_l>; - rockchip,system-power-controller; - wakeup-source; - - vcc1-supply = <&vcc5v0_sys>; - vcc2-supply = <&vcc5v0_sys>; - vcc3-supply = <&vcc5v0_sys>; - vcc4-supply = <&vcc5v0_sys>; - vcc5-supply = <&vcc_buck5>; - vcc6-supply = <&vcc_buck5>; - vcc7-supply = <&vcc5v0_sys>; - vcc8-supply = <&vcc3v3_sys>; - vcc9-supply = <&vcc5v0_sys>; - - regulators { - vdd_log: DCDC_REG1 { - regulator-name = "vdd_log"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1350000>; - regulator-initial-mode = <0x2>; - regulator-state-mem { - regulator-off-in-suspend; - regulator-suspend-microvolt = <900000>; - }; - }; - - vdd_cpu_l: DCDC_REG2 { - regulator-name = "vdd_cpu_l"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1350000>; - regulator-ramp-delay = <6001>; - regulator-initial-mode = <0x2>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_ddr: DCDC_REG3 { - regulator-name = "vcc_ddr"; - regulator-always-on; - regulator-boot-on; - regulator-initial-mode = <0x2>; - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - vcc3v3_sys: DCDC_REG4 { - regulator-name = "vcc3v3_sys"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-initial-mode = <0x2>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vcc_buck5: DCDC_REG5 { - regulator-name = "vcc_buck5"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <2200000>; - regulator-max-microvolt = <2200000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <2200000>; - }; - }; - - vcca_0v9: LDO_REG1 { - regulator-name = "vcca_0v9"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <900000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <900000>; - }; - }; - - vcc_1v8: LDO_REG2 { - regulator-name = "vcc_1v8"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vcc_0v9: LDO_REG3 { - regulator-name = "vcc_0v9"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <900000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <900000>; - }; - }; - - vcca_1v8: LDO_REG4 { - regulator-name = "vcca_1v8"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1850000>; - regulator-max-microvolt = <1850000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1850000>; - }; - }; - - /* - * As per BSP, but schematic not showing any regulator - * pin for LD05. - */ - vdd1v5_dvp: LDO_REG5 { - regulator-name = "vdd1v5_dvp"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_1v5: LDO_REG6 { - regulator-name = "vcc_1v5"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vccio_3v0: LDO_REG7 { - regulator-name = "vccio_3v0"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vccio_sd: LDO_REG8 { - regulator-name = "vccio_sd"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - /* - * As per BSP, but schematic not showing any regulator - * pin for LD09. - */ - vcc_sd: LDO_REG9 { - regulator-name = "vcc_sd"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc5v0_usb2: SWITCH_REG1 { - regulator-name = "vcc5v0_usb2"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <5000000>; - }; - }; - - vccio_3v3: vcc_lan: SWITCH_REG2 { - regulator-name = "vccio_3v3"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - }; - }; -}; - -&i2c1 { - i2c-scl-falling-time-ns = <30>; - i2c-scl-rising-time-ns = <140>; - status = "okay"; -}; - -&i2c2 { - clock-frequency = <400000>; - status = "okay"; - - hym8563: rtc@51 { - compatible = "haoyu,hym8563"; - reg = <0x51>; - #clock-cells = <0>; - clock-output-names = "hym8563"; - pinctrl-names = "default"; - pinctrl-0 = <&hym8563_int>; - interrupt-parent = <&gpio4>; - interrupts = ; - }; -}; - -&i2c3 { - i2c-scl-rising-time-ns = <450>; - i2c-scl-falling-time-ns = <15>; - status = "okay"; -}; - -&io_domains { - status = "okay"; - bt656-supply = <&vcca_1v8>; - gpio1830-supply = <&vccio_3v0>; - sdmmc-supply = <&vccio_sd>; -}; - -&pcie_phy { - status = "okay"; -}; - -&pcie0 { - ep-gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>; - num-lanes = <4>; - pinctrl-0 = <&pcie_clkreqnb_cpm>; - pinctrl-names = "default"; - vpcie0v9-supply = <&vcca_0v9>; /* VCC_0V9_S0 */ - vpcie1v8-supply = <&vcca_1v8>; /* VCC_1V8_S0 */ - vpcie3v3-supply = <&vcc3v3_pcie>; - status = "okay"; -}; - -&pinctrl { - hym8563 { - hym8563_int: hym8563-int { - rockchip,pins = <4 RK_PD6 0 &pcfg_pull_up>; - }; - }; - - pcie { - pcie_pwr: pcie-pwr { - rockchip,pins = <4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - pmic { - pmic_int_l: pmic-int-l { - rockchip,pins = <1 RK_PC2 0 &pcfg_pull_up>; - }; - }; - - sdio-pwrseq { - wifi_enable_h: wifi-enable-h { - rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - vbus_host { - usb1_en_oc: usb1-en-oc { - rockchip,pins = <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - vbus_typec { - usb0_en_oc: usb0-en-oc { - rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; -}; - -&pmu_io_domains { - status = "okay"; - pmu1830-supply = <&vcc_1v8>; -}; - -&sdio_pwrseq { - /* - * On the module itself this is one of these (depending - * on the actual card populated): - * - SDIO_RESET_L_WL_REG_ON - * - PDN (power down when low) - */ - reset-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_LOW>; -}; - -&sdhci { - bus-width = <8>; - mmc-hs400-1_8v; - mmc-hs400-enhanced-strobe; - non-removable; - status = "okay"; -}; - -&sdmmc { - cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>; - max-frequency = <150000000>; -}; - -&tcphy0 { - status = "okay"; -}; - -&tsadc { - rockchip,hw-tshut-mode = <1>; - rockchip,hw-tshut-polarity = <1>; - status = "okay"; -}; - -&u2phy0 { - status = "okay"; - - u2phy0_otg: otg-port { - phy-supply = <&vbus_typec>; - status = "okay"; - }; - - u2phy0_host: host-port { - phy-supply = <&vbus_host>; - status = "okay"; - }; -}; - - -&u2phy1 { - status = "okay"; - - u2phy1_host: host-port { - phy-supply = <&vbus_host>; - status = "okay"; - }; -}; - -&usb_host0_ehci { - status = "okay"; -}; - -&usb_host0_ohci { - status = "okay"; -}; - -&usb_host1_ehci { - status = "okay"; -}; - -&usb_host1_ohci { - status = "okay"; -}; - -&usbdrd3_0 { - status = "okay"; -}; - -&usbdrd_dwc3_0 { - status = "okay"; -}; - -&vbus_host { - enable-active-high; - gpio = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>; /* USB1_EN_OC# */ - pinctrl-names = "default"; - pinctrl-0 = <&usb1_en_oc>; -}; - -&vbus_typec { - enable-active-high; - gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; /* USB0_EN_OC# */ - pinctrl-names = "default"; - pinctrl-0 = <&usb0_en_oc>; -}; diff --git a/arch/arm/dts/rk3399pro.dtsi b/arch/arm/dts/rk3399pro.dtsi deleted file mode 100644 index bb5ebf6608b9..000000000000 --- a/arch/arm/dts/rk3399pro.dtsi +++ /dev/null @@ -1,22 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -// Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd. - -#include "rk3399.dtsi" - -/ { - compatible = "rockchip,rk3399pro"; -}; - -/* Default to enabled since AP talk to NPU part over pcie */ -&pcie_phy { - status = "okay"; -}; - -/* Default to enabled since AP talk to NPU part over pcie */ -&pcie0 { - ep-gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>; - num-lanes = <4>; - pinctrl-names = "default"; - pinctrl-0 = <&pcie_clkreqn_cpm>; - status = "okay"; -}; diff --git a/doc/device-tree-bindings/clock/rockchip,rk3399-dmc.txt b/doc/device-tree-bindings/clock/rockchip,rk3399-dmc.txt deleted file mode 100644 index 4a56f78f555b..000000000000 --- a/doc/device-tree-bindings/clock/rockchip,rk3399-dmc.txt +++ /dev/null @@ -1,42 +0,0 @@ -Rockchip Dynamic Memory Controller Driver -Required properties: -- compatible: "rockchip,rk3399-dmc", "syscon" -- rockchip,cru: this driver should access cru regs, so need get cru here -- rockchip,pmucru: this driver should access pmucru regs, so need get pmucru here -- rockchip,pmugrf: this driver should access pmugrf regs, so need get pmugrf here -- rockchip,pmusgrf: this driver should access pmusgrf regs, so need get pmusgrf here -- rockchip,cic: this driver should access cic regs, so need get cic here -- reg: dynamic ram protocol controller(PCTL) address, PHY Independent(PI) address, phy controller(PHYCTL) address and memory schedule(MSCH) address -- clock: must include clock specifiers corresponding to entries in the clock-names property. - Must contain - dmc_clk: for ddr working frequency -- rockchip,sdram-params: SDRAM parameters, including all the information by ddr driver: - Must contain - Genarate by vendor tool and adjust for U-Boot dtsi. - -Example: - dmc: dmc { - bootph-all; - compatible = "rockchip,rk3399-dmc"; - devfreq-events = <&dfi>; - interrupts = ; - clocks = <&cru SCLK_DDRCLK>; - clock-names = "dmc_clk"; - reg = <0x0 0xffa80000 0x0 0x0800 - 0x0 0xffa80800 0x0 0x1800 - 0x0 0xffa82000 0x0 0x2000 - 0x0 0xffa84000 0x0 0x1000 - 0x0 0xffa88000 0x0 0x0800 - 0x0 0xffa88800 0x0 0x1800 - 0x0 0xffa8a000 0x0 0x2000 - 0x0 0xffa8c000 0x0 0x1000>; - }; - - &dmc { - rockchip,sdram-params = < - 0x2 - 0xa - 0x3 - ... - >; - }; diff --git a/include/dt-bindings/clock/rk3399-cru.h b/include/dt-bindings/clock/rk3399-cru.h deleted file mode 100644 index 39169d94a44e..000000000000 --- a/include/dt-bindings/clock/rk3399-cru.h +++ /dev/null @@ -1,751 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * Copyright (c) 2016 Rockchip Electronics Co. Ltd. - * Author: Xing Zheng - */ - -#ifndef _DT_BINDINGS_CLK_ROCKCHIP_RK3399_H -#define _DT_BINDINGS_CLK_ROCKCHIP_RK3399_H - -/* core clocks */ -#define PLL_APLLL 1 -#define PLL_APLLB 2 -#define PLL_DPLL 3 -#define PLL_CPLL 4 -#define PLL_GPLL 5 -#define PLL_NPLL 6 -#define PLL_VPLL 7 -#define ARMCLKL 8 -#define ARMCLKB 9 - -/* sclk gates (special clocks) */ -#define SCLK_I2C1 65 -#define SCLK_I2C2 66 -#define SCLK_I2C3 67 -#define SCLK_I2C5 68 -#define SCLK_I2C6 69 -#define SCLK_I2C7 70 -#define SCLK_SPI0 71 -#define SCLK_SPI1 72 -#define SCLK_SPI2 73 -#define SCLK_SPI4 74 -#define SCLK_SPI5 75 -#define SCLK_SDMMC 76 -#define SCLK_SDIO 77 -#define SCLK_EMMC 78 -#define SCLK_TSADC 79 -#define SCLK_SARADC 80 -#define SCLK_UART0 81 -#define SCLK_UART1 82 -#define SCLK_UART2 83 -#define SCLK_UART3 84 -#define SCLK_SPDIF_8CH 85 -#define SCLK_I2S0_8CH 86 -#define SCLK_I2S1_8CH 87 -#define SCLK_I2S2_8CH 88 -#define SCLK_I2S_8CH_OUT 89 -#define SCLK_TIMER00 90 -#define SCLK_TIMER01 91 -#define SCLK_TIMER02 92 -#define SCLK_TIMER03 93 -#define SCLK_TIMER04 94 -#define SCLK_TIMER05 95 -#define SCLK_TIMER06 96 -#define SCLK_TIMER07 97 -#define SCLK_TIMER08 98 -#define SCLK_TIMER09 99 -#define SCLK_TIMER10 100 -#define SCLK_TIMER11 101 -#define SCLK_MACREF 102 -#define SCLK_MAC_RX 103 -#define SCLK_MAC_TX 104 -#define SCLK_MAC 105 -#define SCLK_MACREF_OUT 106 -#define SCLK_VOP0_PWM 107 -#define SCLK_VOP1_PWM 108 -#define SCLK_RGA_CORE 109 -#define SCLK_ISP0 110 -#define SCLK_ISP1 111 -#define SCLK_HDMI_CEC 112 -#define SCLK_HDMI_SFR 113 -#define SCLK_DP_CORE 114 -#define SCLK_PVTM_CORE_L 115 -#define SCLK_PVTM_CORE_B 116 -#define SCLK_PVTM_GPU 117 -#define SCLK_PVTM_DDR 118 -#define SCLK_MIPIDPHY_REF 119 -#define SCLK_MIPIDPHY_CFG 120 -#define SCLK_HSICPHY 121 -#define SCLK_USBPHY480M 122 -#define SCLK_USB2PHY0_REF 123 -#define SCLK_USB2PHY1_REF 124 -#define SCLK_UPHY0_TCPDPHY_REF 125 -#define SCLK_UPHY0_TCPDCORE 126 -#define SCLK_UPHY1_TCPDPHY_REF 127 -#define SCLK_UPHY1_TCPDCORE 128 -#define SCLK_USB3OTG0_REF 129 -#define SCLK_USB3OTG1_REF 130 -#define SCLK_USB3OTG0_SUSPEND 131 -#define SCLK_USB3OTG1_SUSPEND 132 -#define SCLK_CRYPTO0 133 -#define SCLK_CRYPTO1 134 -#define SCLK_CCI_TRACE 135 -#define SCLK_CS 136 -#define SCLK_CIF_OUT 137 -#define SCLK_PCIEPHY_REF 138 -#define SCLK_PCIE_CORE 139 -#define SCLK_M0_PERILP 140 -#define SCLK_M0_PERILP_DEC 141 -#define SCLK_CM0S 142 -#define SCLK_DBG_NOC 143 -#define SCLK_DBG_PD_CORE_B 144 -#define SCLK_DBG_PD_CORE_L 145 -#define SCLK_DFIMON0_TIMER 146 -#define SCLK_DFIMON1_TIMER 147 -#define SCLK_INTMEM0 148 -#define SCLK_INTMEM1 149 -#define SCLK_INTMEM2 150 -#define SCLK_INTMEM3 151 -#define SCLK_INTMEM4 152 -#define SCLK_INTMEM5 153 -#define SCLK_SDMMC_DRV 154 -#define SCLK_SDMMC_SAMPLE 155 -#define SCLK_SDIO_DRV 156 -#define SCLK_SDIO_SAMPLE 157 -#define SCLK_VDU_CORE 158 -#define SCLK_VDU_CA 159 -#define SCLK_PCIE_PM 160 -#define SCLK_SPDIF_REC_DPTX 161 -#define SCLK_DPHY_PLL 162 -#define SCLK_DPHY_TX0_CFG 163 -#define SCLK_DPHY_TX1RX1_CFG 164 -#define SCLK_DPHY_RX0_CFG 165 -#define SCLK_RMII_SRC 166 -#define SCLK_PCIEPHY_REF100M 167 -#define SCLK_DDRC 168 -#define SCLK_TESTCLKOUT1 169 -#define SCLK_TESTCLKOUT2 170 - -#define DCLK_VOP0 180 -#define DCLK_VOP1 181 -#define DCLK_VOP0_DIV 182 -#define DCLK_VOP1_DIV 183 -#define DCLK_M0_PERILP 184 -#define DCLK_VOP0_FRAC 185 -#define DCLK_VOP1_FRAC 186 - -#define FCLK_CM0S 190 - -/* aclk gates */ -#define ACLK_PERIHP 192 -#define ACLK_PERIHP_NOC 193 -#define ACLK_PERILP0 194 -#define ACLK_PERILP0_NOC 195 -#define ACLK_PERF_PCIE 196 -#define ACLK_PCIE 197 -#define ACLK_INTMEM 198 -#define ACLK_TZMA 199 -#define ACLK_DCF 200 -#define ACLK_CCI 201 -#define ACLK_CCI_NOC0 202 -#define ACLK_CCI_NOC1 203 -#define ACLK_CCI_GRF 204 -#define ACLK_CENTER 205 -#define ACLK_CENTER_MAIN_NOC 206 -#define ACLK_CENTER_PERI_NOC 207 -#define ACLK_GPU 208 -#define ACLK_PERF_GPU 209 -#define ACLK_GPU_GRF 210 -#define ACLK_DMAC0_PERILP 211 -#define ACLK_DMAC1_PERILP 212 -#define ACLK_GMAC 213 -#define ACLK_GMAC_NOC 214 -#define ACLK_PERF_GMAC 215 -#define ACLK_VOP0_NOC 216 -#define ACLK_VOP0 217 -#define ACLK_VOP1_NOC 218 -#define ACLK_VOP1 219 -#define ACLK_RGA 220 -#define ACLK_RGA_NOC 221 -#define ACLK_HDCP 222 -#define ACLK_HDCP_NOC 223 -#define ACLK_HDCP22 224 -#define ACLK_IEP 225 -#define ACLK_IEP_NOC 226 -#define ACLK_VIO 227 -#define ACLK_VIO_NOC 228 -#define ACLK_ISP0 229 -#define ACLK_ISP1 230 -#define ACLK_ISP0_NOC 231 -#define ACLK_ISP1_NOC 232 -#define ACLK_ISP0_WRAPPER 233 -#define ACLK_ISP1_WRAPPER 234 -#define ACLK_VCODEC 235 -#define ACLK_VCODEC_NOC 236 -#define ACLK_VDU 237 -#define ACLK_VDU_NOC 238 -#define ACLK_PERI 239 -#define ACLK_EMMC 240 -#define ACLK_EMMC_CORE 241 -#define ACLK_EMMC_NOC 242 -#define ACLK_EMMC_GRF 243 -#define ACLK_USB3 244 -#define ACLK_USB3_NOC 245 -#define ACLK_USB3OTG0 246 -#define ACLK_USB3OTG1 247 -#define ACLK_USB3_RKSOC_AXI_PERF 248 -#define ACLK_USB3_GRF 249 -#define ACLK_GIC 250 -#define ACLK_GIC_NOC 251 -#define ACLK_GIC_ADB400_CORE_L_2_GIC 252 -#define ACLK_GIC_ADB400_CORE_B_2_GIC 253 -#define ACLK_GIC_ADB400_GIC_2_CORE_L 254 -#define ACLK_GIC_ADB400_GIC_2_CORE_B 255 -#define ACLK_CORE_ADB400_CORE_L_2_CCI500 256 -#define ACLK_CORE_ADB400_CORE_B_2_CCI500 257 -#define ACLK_ADB400M_PD_CORE_L 258 -#define ACLK_ADB400M_PD_CORE_B 259 -#define ACLK_PERF_CORE_L 260 -#define ACLK_PERF_CORE_B 261 -#define ACLK_GIC_PRE 262 -#define ACLK_VOP0_PRE 263 -#define ACLK_VOP1_PRE 264 - -/* pclk gates */ -#define PCLK_PERIHP 320 -#define PCLK_PERIHP_NOC 321 -#define PCLK_PERILP0 322 -#define PCLK_PERILP1 323 -#define PCLK_PERILP1_NOC 324 -#define PCLK_PERILP_SGRF 325 -#define PCLK_PERIHP_GRF 326 -#define PCLK_PCIE 327 -#define PCLK_SGRF 328 -#define PCLK_INTR_ARB 329 -#define PCLK_CENTER_MAIN_NOC 330 -#define PCLK_CIC 331 -#define PCLK_COREDBG_B 332 -#define PCLK_COREDBG_L 333 -#define PCLK_DBG_CXCS_PD_CORE_B 334 -#define PCLK_DCF 335 -#define PCLK_GPIO2 336 -#define PCLK_GPIO3 337 -#define PCLK_GPIO4 338 -#define PCLK_GRF 339 -#define PCLK_HSICPHY 340 -#define PCLK_I2C1 341 -#define PCLK_I2C2 342 -#define PCLK_I2C3 343 -#define PCLK_I2C5 344 -#define PCLK_I2C6 345 -#define PCLK_I2C7 346 -#define PCLK_SPI0 347 -#define PCLK_SPI1 348 -#define PCLK_SPI2 349 -#define PCLK_SPI4 350 -#define PCLK_SPI5 351 -#define PCLK_UART0 352 -#define PCLK_UART1 353 -#define PCLK_UART2 354 -#define PCLK_UART3 355 -#define PCLK_TSADC 356 -#define PCLK_SARADC 357 -#define PCLK_GMAC 358 -#define PCLK_GMAC_NOC 359 -#define PCLK_TIMER0 360 -#define PCLK_TIMER1 361 -#define PCLK_EDP 362 -#define PCLK_EDP_NOC 363 -#define PCLK_EDP_CTRL 364 -#define PCLK_VIO 365 -#define PCLK_VIO_NOC 366 -#define PCLK_VIO_GRF 367 -#define PCLK_MIPI_DSI0 368 -#define PCLK_MIPI_DSI1 369 -#define PCLK_HDCP 370 -#define PCLK_HDCP_NOC 371 -#define PCLK_HDMI_CTRL 372 -#define PCLK_DP_CTRL 373 -#define PCLK_HDCP22 374 -#define PCLK_GASKET 375 -#define PCLK_DDR 376 -#define PCLK_DDR_MON 377 -#define PCLK_DDR_SGRF 378 -#define PCLK_ISP1_WRAPPER 379 -#define PCLK_WDT 380 -#define PCLK_EFUSE1024NS 381 -#define PCLK_EFUSE1024S 382 -#define PCLK_PMU_INTR_ARB 383 -#define PCLK_MAILBOX0 384 -#define PCLK_USBPHY_MUX_G 385 -#define PCLK_UPHY0_TCPHY_G 386 -#define PCLK_UPHY0_TCPD_G 387 -#define PCLK_UPHY1_TCPHY_G 388 -#define PCLK_UPHY1_TCPD_G 389 -#define PCLK_ALIVE 390 - -/* hclk gates */ -#define HCLK_PERIHP 448 -#define HCLK_PERILP0 449 -#define HCLK_PERILP1 450 -#define HCLK_PERILP0_NOC 451 -#define HCLK_PERILP1_NOC 452 -#define HCLK_M0_PERILP 453 -#define HCLK_M0_PERILP_NOC 454 -#define HCLK_AHB1TOM 455 -#define HCLK_HOST0 456 -#define HCLK_HOST0_ARB 457 -#define HCLK_HOST1 458 -#define HCLK_HOST1_ARB 459 -#define HCLK_HSIC 460 -#define HCLK_SD 461 -#define HCLK_SDMMC 462 -#define HCLK_SDMMC_NOC 463 -#define HCLK_M_CRYPTO0 464 -#define HCLK_M_CRYPTO1 465 -#define HCLK_S_CRYPTO0 466 -#define HCLK_S_CRYPTO1 467 -#define HCLK_I2S0_8CH 468 -#define HCLK_I2S1_8CH 469 -#define HCLK_I2S2_8CH 470 -#define HCLK_SPDIF 471 -#define HCLK_VOP0_NOC 472 -#define HCLK_VOP0 473 -#define HCLK_VOP1_NOC 474 -#define HCLK_VOP1 475 -#define HCLK_ROM 476 -#define HCLK_IEP 477 -#define HCLK_IEP_NOC 478 -#define HCLK_ISP0 479 -#define HCLK_ISP1 480 -#define HCLK_ISP0_NOC 481 -#define HCLK_ISP1_NOC 482 -#define HCLK_ISP0_WRAPPER 483 -#define HCLK_ISP1_WRAPPER 484 -#define HCLK_RGA 485 -#define HCLK_RGA_NOC 486 -#define HCLK_HDCP 487 -#define HCLK_HDCP_NOC 488 -#define HCLK_HDCP22 489 -#define HCLK_VCODEC 490 -#define HCLK_VCODEC_NOC 491 -#define HCLK_VDU 492 -#define HCLK_VDU_NOC 493 -#define HCLK_SDIO 494 -#define HCLK_SDIO_NOC 495 -#define HCLK_SDIOAUDIO_NOC 496 - -#define CLK_NR_CLKS (HCLK_SDIOAUDIO_NOC + 1) - -/* pmu-clocks indices */ - -#define PLL_PPLL 1 - -#define SCLK_32K_SUSPEND_PMU 2 -#define SCLK_SPI3_PMU 3 -#define SCLK_TIMER12_PMU 4 -#define SCLK_TIMER13_PMU 5 -#define SCLK_UART4_PMU 6 -#define SCLK_PVTM_PMU 7 -#define SCLK_WIFI_PMU 8 -#define SCLK_I2C0_PMU 9 -#define SCLK_I2C4_PMU 10 -#define SCLK_I2C8_PMU 11 - -#define PCLK_SRC_PMU 19 -#define PCLK_PMU 20 -#define PCLK_PMUGRF_PMU 21 -#define PCLK_INTMEM1_PMU 22 -#define PCLK_GPIO0_PMU 23 -#define PCLK_GPIO1_PMU 24 -#define PCLK_SGRF_PMU 25 -#define PCLK_NOC_PMU 26 -#define PCLK_I2C0_PMU 27 -#define PCLK_I2C4_PMU 28 -#define PCLK_I2C8_PMU 29 -#define PCLK_RKPWM_PMU 30 -#define PCLK_SPI3_PMU 31 -#define PCLK_TIMER_PMU 32 -#define PCLK_MAILBOX_PMU 33 -#define PCLK_UART4_PMU 34 -#define PCLK_WDT_M0_PMU 35 - -#define FCLK_CM0S_SRC_PMU 44 -#define FCLK_CM0S_PMU 45 -#define SCLK_CM0S_PMU 46 -#define HCLK_CM0S_PMU 47 -#define DCLK_CM0S_PMU 48 -#define PCLK_INTR_ARB_PMU 49 -#define HCLK_NOC_PMU 50 - -#define CLKPMU_NR_CLKS (HCLK_NOC_PMU + 1) - -/* soft-reset indices */ - -/* cru_softrst_con0 */ -#define SRST_CORE_L0 0 -#define SRST_CORE_B0 1 -#define SRST_CORE_PO_L0 2 -#define SRST_CORE_PO_B0 3 -#define SRST_L2_L 4 -#define SRST_L2_B 5 -#define SRST_ADB_L 6 -#define SRST_ADB_B 7 -#define SRST_A_CCI 8 -#define SRST_A_CCIM0_NOC 9 -#define SRST_A_CCIM1_NOC 10 -#define SRST_DBG_NOC 11 - -/* cru_softrst_con1 */ -#define SRST_CORE_L0_T 16 -#define SRST_CORE_L1 17 -#define SRST_CORE_L2 18 -#define SRST_CORE_L3 19 -#define SRST_CORE_PO_L0_T 20 -#define SRST_CORE_PO_L1 21 -#define SRST_CORE_PO_L2 22 -#define SRST_CORE_PO_L3 23 -#define SRST_A_ADB400_GIC2COREL 24 -#define SRST_A_ADB400_COREL2GIC 25 -#define SRST_P_DBG_L 26 -#define SRST_L2_L_T 28 -#define SRST_ADB_L_T 29 -#define SRST_A_RKPERF_L 30 -#define SRST_PVTM_CORE_L 31 - -/* cru_softrst_con2 */ -#define SRST_CORE_B0_T 32 -#define SRST_CORE_B1 33 -#define SRST_CORE_PO_B0_T 36 -#define SRST_CORE_PO_B1 37 -#define SRST_A_ADB400_GIC2COREB 40 -#define SRST_A_ADB400_COREB2GIC 41 -#define SRST_P_DBG_B 42 -#define SRST_L2_B_T 43 -#define SRST_ADB_B_T 45 -#define SRST_A_RKPERF_B 46 -#define SRST_PVTM_CORE_B 47 - -/* cru_softrst_con3 */ -#define SRST_A_CCI_T 50 -#define SRST_A_CCIM0_NOC_T 51 -#define SRST_A_CCIM1_NOC_T 52 -#define SRST_A_ADB400M_PD_CORE_B_T 53 -#define SRST_A_ADB400M_PD_CORE_L_T 54 -#define SRST_DBG_NOC_T 55 -#define SRST_DBG_CXCS 56 -#define SRST_CCI_TRACE 57 -#define SRST_P_CCI_GRF 58 - -/* cru_softrst_con4 */ -#define SRST_A_CENTER_MAIN_NOC 64 -#define SRST_A_CENTER_PERI_NOC 65 -#define SRST_P_CENTER_MAIN 66 -#define SRST_P_DDRMON 67 -#define SRST_P_CIC 68 -#define SRST_P_CENTER_SGRF 69 -#define SRST_DDR0_MSCH 70 -#define SRST_DDRCFG0_MSCH 71 -#define SRST_DDR0 72 -#define SRST_DDRPHY0 73 -#define SRST_DDR1_MSCH 74 -#define SRST_DDRCFG1_MSCH 75 -#define SRST_DDR1 76 -#define SRST_DDRPHY1 77 -#define SRST_DDR_CIC 78 -#define SRST_PVTM_DDR 79 - -/* cru_softrst_con5 */ -#define SRST_A_VCODEC_NOC 80 -#define SRST_A_VCODEC 81 -#define SRST_H_VCODEC_NOC 82 -#define SRST_H_VCODEC 83 -#define SRST_A_VDU_NOC 88 -#define SRST_A_VDU 89 -#define SRST_H_VDU_NOC 90 -#define SRST_H_VDU 91 -#define SRST_VDU_CORE 92 -#define SRST_VDU_CA 93 - -/* cru_softrst_con6 */ -#define SRST_A_IEP_NOC 96 -#define SRST_A_VOP_IEP 97 -#define SRST_A_IEP 98 -#define SRST_H_IEP_NOC 99 -#define SRST_H_IEP 100 -#define SRST_A_RGA_NOC 102 -#define SRST_A_RGA 103 -#define SRST_H_RGA_NOC 104 -#define SRST_H_RGA 105 -#define SRST_RGA_CORE 106 -#define SRST_EMMC_NOC 108 -#define SRST_EMMC 109 -#define SRST_EMMC_GRF 110 - -/* cru_softrst_con7 */ -#define SRST_A_PERIHP_NOC 112 -#define SRST_P_PERIHP_GRF 113 -#define SRST_H_PERIHP_NOC 114 -#define SRST_USBHOST0 115 -#define SRST_HOSTC0_AUX 116 -#define SRST_HOST0_ARB 117 -#define SRST_USBHOST1 118 -#define SRST_HOSTC1_AUX 119 -#define SRST_HOST1_ARB 120 -#define SRST_SDIO0 121 -#define SRST_SDMMC 122 -#define SRST_HSIC 123 -#define SRST_HSIC_AUX 124 -#define SRST_AHB1TOM 125 -#define SRST_P_PERIHP_NOC 126 -#define SRST_HSICPHY 127 - -/* cru_softrst_con8 */ -#define SRST_A_PCIE 128 -#define SRST_P_PCIE 129 -#define SRST_PCIE_CORE 130 -#define SRST_PCIE_MGMT 131 -#define SRST_PCIE_MGMT_STICKY 132 -#define SRST_PCIE_PIPE 133 -#define SRST_PCIE_PM 134 -#define SRST_PCIEPHY 135 -#define SRST_A_GMAC_NOC 136 -#define SRST_A_GMAC 137 -#define SRST_P_GMAC_NOC 138 -#define SRST_P_GMAC_GRF 140 -#define SRST_HSICPHY_POR 142 -#define SRST_HSICPHY_UTMI 143 - -/* cru_softrst_con9 */ -#define SRST_USB2PHY0_POR 144 -#define SRST_USB2PHY0_UTMI_PORT0 145 -#define SRST_USB2PHY0_UTMI_PORT1 146 -#define SRST_USB2PHY0_EHCIPHY 147 -#define SRST_UPHY0_PIPE_L00 148 -#define SRST_UPHY0 149 -#define SRST_UPHY0_TCPDPWRUP 150 -#define SRST_USB2PHY1_POR 152 -#define SRST_USB2PHY1_UTMI_PORT0 153 -#define SRST_USB2PHY1_UTMI_PORT1 154 -#define SRST_USB2PHY1_EHCIPHY 155 -#define SRST_UPHY1_PIPE_L00 156 -#define SRST_UPHY1 157 -#define SRST_UPHY1_TCPDPWRUP 158 - -/* cru_softrst_con10 */ -#define SRST_A_PERILP0_NOC 160 -#define SRST_A_DCF 161 -#define SRST_GIC500 162 -#define SRST_DMAC0_PERILP0 163 -#define SRST_DMAC1_PERILP0 164 -#define SRST_TZMA 165 -#define SRST_INTMEM 166 -#define SRST_ADB400_MST0 167 -#define SRST_ADB400_MST1 168 -#define SRST_ADB400_SLV0 169 -#define SRST_ADB400_SLV1 170 -#define SRST_H_PERILP0 171 -#define SRST_H_PERILP0_NOC 172 -#define SRST_ROM 173 -#define SRST_CRYPTO0_S 174 -#define SRST_CRYPTO0_M 175 - -/* cru_softrst_con11 */ -#define SRST_P_DCF 176 -#define SRST_CM0S_NOC 177 -#define SRST_CM0S 178 -#define SRST_CM0S_DBG 179 -#define SRST_CM0S_PO 180 -#define SRST_CRYPTO0 181 -#define SRST_P_PERILP1_SGRF 182 -#define SRST_P_PERILP1_GRF 183 -#define SRST_CRYPTO1_S 184 -#define SRST_CRYPTO1_M 185 -#define SRST_CRYPTO1 186 -#define SRST_GIC_NOC 188 -#define SRST_SD_NOC 189 -#define SRST_SDIOAUDIO_BRG 190 - -/* cru_softrst_con12 */ -#define SRST_H_PERILP1 192 -#define SRST_H_PERILP1_NOC 193 -#define SRST_H_I2S0_8CH 194 -#define SRST_H_I2S1_8CH 195 -#define SRST_H_I2S2_8CH 196 -#define SRST_H_SPDIF_8CH 197 -#define SRST_P_PERILP1_NOC 198 -#define SRST_P_EFUSE_1024 199 -#define SRST_P_EFUSE_1024S 200 -#define SRST_P_I2C0 201 -#define SRST_P_I2C1 202 -#define SRST_P_I2C2 203 -#define SRST_P_I2C3 204 -#define SRST_P_I2C4 205 -#define SRST_P_I2C5 206 -#define SRST_P_MAILBOX0 207 - -/* cru_softrst_con13 */ -#define SRST_P_UART0 208 -#define SRST_P_UART1 209 -#define SRST_P_UART2 210 -#define SRST_P_UART3 211 -#define SRST_P_SARADC 212 -#define SRST_P_TSADC 213 -#define SRST_P_SPI0 214 -#define SRST_P_SPI1 215 -#define SRST_P_SPI2 216 -#define SRST_P_SPI3 217 -#define SRST_P_SPI4 218 -#define SRST_SPI0 219 -#define SRST_SPI1 220 -#define SRST_SPI2 221 -#define SRST_SPI3 222 -#define SRST_SPI4 223 - -/* cru_softrst_con14 */ -#define SRST_I2S0_8CH 224 -#define SRST_I2S1_8CH 225 -#define SRST_I2S2_8CH 226 -#define SRST_SPDIF_8CH 227 -#define SRST_UART0 228 -#define SRST_UART1 229 -#define SRST_UART2 230 -#define SRST_UART3 231 -#define SRST_TSADC 232 -#define SRST_I2C0 233 -#define SRST_I2C1 234 -#define SRST_I2C2 235 -#define SRST_I2C3 236 -#define SRST_I2C4 237 -#define SRST_I2C5 238 -#define SRST_SDIOAUDIO_NOC 239 - -/* cru_softrst_con15 */ -#define SRST_A_VIO_NOC 240 -#define SRST_A_HDCP_NOC 241 -#define SRST_A_HDCP 242 -#define SRST_H_HDCP_NOC 243 -#define SRST_H_HDCP 244 -#define SRST_P_HDCP_NOC 245 -#define SRST_P_HDCP 246 -#define SRST_P_HDMI_CTRL 247 -#define SRST_P_DP_CTRL 248 -#define SRST_S_DP_CTRL 249 -#define SRST_C_DP_CTRL 250 -#define SRST_P_MIPI_DSI0 251 -#define SRST_P_MIPI_DSI1 252 -#define SRST_DP_CORE 253 -#define SRST_DP_I2S 254 - -/* cru_softrst_con16 */ -#define SRST_GASKET 256 -#define SRST_VIO_GRF 258 -#define SRST_DPTX_SPDIF_REC 259 -#define SRST_HDMI_CTRL 260 -#define SRST_HDCP_CTRL 261 -#define SRST_A_ISP0_NOC 262 -#define SRST_A_ISP1_NOC 263 -#define SRST_H_ISP0_NOC 266 -#define SRST_H_ISP1_NOC 267 -#define SRST_H_ISP0 268 -#define SRST_H_ISP1 269 -#define SRST_ISP0 270 -#define SRST_ISP1 271 - -/* cru_softrst_con17 */ -#define SRST_A_VOP0_NOC 272 -#define SRST_A_VOP1_NOC 273 -#define SRST_A_VOP0 274 -#define SRST_A_VOP1 275 -#define SRST_H_VOP0_NOC 276 -#define SRST_H_VOP1_NOC 277 -#define SRST_H_VOP0 278 -#define SRST_H_VOP1 279 -#define SRST_D_VOP0 280 -#define SRST_D_VOP1 281 -#define SRST_VOP0_PWM 282 -#define SRST_VOP1_PWM 283 -#define SRST_P_EDP_NOC 284 -#define SRST_P_EDP_CTRL 285 - -/* cru_softrst_con18 */ -#define SRST_A_GPU 288 -#define SRST_A_GPU_NOC 289 -#define SRST_A_GPU_GRF 290 -#define SRST_PVTM_GPU 291 -#define SRST_A_USB3_NOC 292 -#define SRST_A_USB3_OTG0 293 -#define SRST_A_USB3_OTG1 294 -#define SRST_A_USB3_GRF 295 -#define SRST_PMU 296 - -/* cru_softrst_con19 */ -#define SRST_P_TIMER0_5 304 -#define SRST_TIMER0 305 -#define SRST_TIMER1 306 -#define SRST_TIMER2 307 -#define SRST_TIMER3 308 -#define SRST_TIMER4 309 -#define SRST_TIMER5 310 -#define SRST_P_TIMER6_11 311 -#define SRST_TIMER6 312 -#define SRST_TIMER7 313 -#define SRST_TIMER8 314 -#define SRST_TIMER9 315 -#define SRST_TIMER10 316 -#define SRST_TIMER11 317 -#define SRST_P_INTR_ARB_PMU 318 -#define SRST_P_ALIVE_SGRF 319 - -/* cru_softrst_con20 */ -#define SRST_P_GPIO2 320 -#define SRST_P_GPIO3 321 -#define SRST_P_GPIO4 322 -#define SRST_P_GRF 323 -#define SRST_P_ALIVE_NOC 324 -#define SRST_P_WDT0 325 -#define SRST_P_WDT1 326 -#define SRST_P_INTR_ARB 327 -#define SRST_P_UPHY0_DPTX 328 -#define SRST_P_UPHY0_APB 330 -#define SRST_P_UPHY0_TCPHY 332 -#define SRST_P_UPHY1_TCPHY 333 -#define SRST_P_UPHY0_TCPDCTRL 334 -#define SRST_P_UPHY1_TCPDCTRL 335 - -/* pmu soft-reset indices */ - -/* pmu_cru_softrst_con0 */ -#define SRST_P_NOC 0 -#define SRST_P_INTMEM 1 -#define SRST_H_CM0S 2 -#define SRST_H_CM0S_NOC 3 -#define SRST_DBG_CM0S 4 -#define SRST_PO_CM0S 5 -#define SRST_P_SPI6 6 -#define SRST_SPI6 7 -#define SRST_P_TIMER_0_1 8 -#define SRST_P_TIMER_0 9 -#define SRST_P_TIMER_1 10 -#define SRST_P_UART4 11 -#define SRST_UART4 12 -#define SRST_P_WDT 13 - -/* pmu_cru_softrst_con1 */ -#define SRST_P_I2C6 16 -#define SRST_P_I2C7 17 -#define SRST_P_I2C8 18 -#define SRST_P_MAILBOX 19 -#define SRST_P_RKPWM 20 -#define SRST_P_PMUGRF 21 -#define SRST_P_SGRF 22 -#define SRST_P_GPIO0 23 -#define SRST_P_GPIO1 24 -#define SRST_P_CRU 25 -#define SRST_P_INTR 26 -#define SRST_PVTM 27 -#define SRST_I2C6 28 -#define SRST_I2C7 29 -#define SRST_I2C8 30 - -#endif diff --git a/include/dt-bindings/power/rk3399-power.h b/include/dt-bindings/power/rk3399-power.h deleted file mode 100644 index 168b3bfbd6f5..000000000000 --- a/include/dt-bindings/power/rk3399-power.h +++ /dev/null @@ -1,53 +0,0 @@ -#ifndef __DT_BINDINGS_POWER_RK3399_POWER_H__ -#define __DT_BINDINGS_POWER_RK3399_POWER_H__ - -/* VD_CORE_L */ -#define RK3399_PD_A53_L0 0 -#define RK3399_PD_A53_L1 1 -#define RK3399_PD_A53_L2 2 -#define RK3399_PD_A53_L3 3 -#define RK3399_PD_SCU_L 4 - -/* VD_CORE_B */ -#define RK3399_PD_A72_B0 5 -#define RK3399_PD_A72_B1 6 -#define RK3399_PD_SCU_B 7 - -/* VD_LOGIC */ -#define RK3399_PD_TCPD0 8 -#define RK3399_PD_TCPD1 9 -#define RK3399_PD_CCI 10 -#define RK3399_PD_CCI0 11 -#define RK3399_PD_CCI1 12 -#define RK3399_PD_PERILP 13 -#define RK3399_PD_PERIHP 14 -#define RK3399_PD_VIO 15 -#define RK3399_PD_VO 16 -#define RK3399_PD_VOPB 17 -#define RK3399_PD_VOPL 18 -#define RK3399_PD_ISP0 19 -#define RK3399_PD_ISP1 20 -#define RK3399_PD_HDCP 21 -#define RK3399_PD_GMAC 22 -#define RK3399_PD_EMMC 23 -#define RK3399_PD_USB3 24 -#define RK3399_PD_EDP 25 -#define RK3399_PD_GIC 26 -#define RK3399_PD_SD 27 -#define RK3399_PD_SDIOAUDIO 28 -#define RK3399_PD_ALIVE 29 - -/* VD_CENTER */ -#define RK3399_PD_CENTER 30 -#define RK3399_PD_VCODEC 31 -#define RK3399_PD_VDU 32 -#define RK3399_PD_RGA 33 -#define RK3399_PD_IEP 34 - -/* VD_GPU */ -#define RK3399_PD_GPU 35 - -/* VD_PMU */ -#define RK3399_PD_PMU 36 - -#endif