diff mbox series

[3/3] imx8mm_venice_defconfig: Enable PCIe/NVMe support

Message ID 20240417200922.3749671-3-tharvey@gateworks.com
State Changes Requested
Delegated to: Fabio Estevam
Headers show
Series [1/3] clk: imx8mm: Add support for PCIe clocks | expand

Commit Message

Tim Harvey April 17, 2024, 8:09 p.m. UTC 
Enable PCIe/NVMe support. Also, enable the reset
driver which is a prerequisite for PCIe support.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
---
 configs/imx8mm_venice_defconfig | 6 ++++++
 1 file changed, 6 insertions(+)
diff mbox series

Patch

diff --git a/configs/imx8mm_venice_defconfig b/configs/imx8mm_venice_defconfig
index c3fd4c45ab3d..d34dd7cc2bac 100644
--- a/configs/imx8mm_venice_defconfig
+++ b/configs/imx8mm_venice_defconfig
@@ -12,6 +12,7 @@  CONFIG_DEFAULT_DEVICE_TREE="freescale/imx8mm-venice-gw71xx-0x"
 CONFIG_SPL_TEXT_BASE=0x7E1000
 CONFIG_TARGET_IMX8MM_VENICE=y
 CONFIG_OF_LIBFDT_OVERLAY=y
+CONFIG_DM_RESET=y
 CONFIG_SYS_MONITOR_LEN=524288
 CONFIG_SPL_MMC=y
 CONFIG_SPL_SERIAL=y
@@ -20,6 +21,7 @@  CONFIG_SPL_STACK=0x920000
 CONFIG_SPL=y
 CONFIG_ENV_OFFSET_REDUND=0x3f8000
 CONFIG_SYS_LOAD_ADDR=0x48200000
+CONFIG_PCI=y
 CONFIG_SYS_MEMTEST_START=0x40000000
 CONFIG_SYS_MEMTEST_END=0x80000000
 CONFIG_FIT=y
@@ -60,6 +62,7 @@  CONFIG_CMD_FUSE=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
+CONFIG_CMD_PCI=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_USB_MASS_STORAGE=y
 CONFIG_CMD_DHCP6=y
@@ -119,6 +122,9 @@  CONFIG_PHY_GIGE=y
 CONFIG_FEC_MXC=y
 CONFIG_KSZ9477=y
 CONFIG_MII=y
+CONFIG_NVME_PCI=y
+CONFIG_PCIE_DW_IMX=y
+CONFIG_PHY_IMX8M_PCIE=y
 CONFIG_PINCTRL=y
 CONFIG_SPL_PINCTRL=y
 CONFIG_PINCTRL_IMX8M=y