| Message ID | 20240409150215.2497778-15-patrice.chotard@foss.st.com |
|---|---|
| State | Accepted |
| Commit | 9897951812e91175964bdc984cf0f3291dedb99a |
| Delegated to: | Patrick Delaunay |
| Headers | show |
| Series | stm32mp: Fix keys & leds management | expand |
Hi, On 4/9/24 17:02, Patrice Chotard wrote: > Instead of using "st,fastboot-gpios" and "st,stm32prog-gpios", declare > 2 gpio-keys. > > Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> > --- > > arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi | 19 +++++++++++++++++-- > 1 file changed, 17 insertions(+), 2 deletions(-) > Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Thanks Patrick
On 4/17/24 11:09, Patrick DELAUNAY wrote: > Hi, > > On 4/9/24 17:02, Patrice Chotard wrote: >> Instead of using "st,fastboot-gpios" and "st,stm32prog-gpios", declare >> 2 gpio-keys. >> >> Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> >> --- >> >> arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi | 19 +++++++++++++++++-- >> 1 file changed, 17 insertions(+), 2 deletions(-) >> > > > Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com> > > Thanks > Patrick > Applied on u-boot-stm32/master
diff --git a/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi b/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi index a16358266a2..6bf6136c5fd 100644 --- a/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi +++ b/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi @@ -4,6 +4,7 @@ */ #include <dt-bindings/clock/stm32mp1-clksrc.h> +#include <dt-bindings/input/linux-event-codes.h> #include "stm32mp15-u-boot.dtsi" #include "stm32mp15-ddr3-1x4Gb-1066-binG.dtsi" @@ -18,8 +19,6 @@ u-boot,error-led = "error"; u-boot,mmc-env-partition = "fip"; st,adc_usb_pd = <&adc1 18>, <&adc1 19>; - st,fastboot-gpios = <&gpioa 13 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; - st,stm32prog-gpios = <&gpioa 14 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; }; #if defined(CONFIG_STM32MP15X_STM32IMAGE) || defined(CONFIG_SPL) @@ -48,6 +47,22 @@ }; #endif + gpio-keys { + compatible = "gpio-keys"; + + button-user-1 { + label = "User-1"; + linux,code = <BTN_1>; + gpios = <&gpioa 14 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; + }; + + button-user-2 { + label = "User-2"; + linux,code = <BTN_2>; + gpios = <&gpioa 13 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; + }; + }; + led { red { label = "error";
Instead of using "st,fastboot-gpios" and "st,stm32prog-gpios", declare 2 gpio-keys. Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> --- arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi | 19 +++++++++++++++++-- 1 file changed, 17 insertions(+), 2 deletions(-)