diff mbox series

[v1,2/2] board: tegra30: switch to standard boot

Message ID 20240117111353.219772-3-clamor95@gmail.com
State Accepted
Commit 745ca4900f0abb43414cb5359e3ee53542a92a26
Delegated to: Thierry Reding
Headers show
Series ARM: tegra: move to standard boot | expand

Commit Message

Svyatoslav Ryhel Jan. 17, 2024, 11:13 a.m. UTC 
Switch transformer, endeavoru, grouper and x3_t30 boards
to bootflow scan.

Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
---
 configs/endeavoru_defconfig       | 2 +-
 configs/grouper_common_defconfig  | 2 +-
 configs/transformer_t30_defconfig | 2 +-
 configs/x3_t30_defconfig          | 2 +-
 4 files changed, 4 insertions(+), 4 deletions(-)
diff mbox series

Patch

diff --git a/configs/endeavoru_defconfig b/configs/endeavoru_defconfig
index f2c35e4f5f..7136a7e8f2 100644
--- a/configs/endeavoru_defconfig
+++ b/configs/endeavoru_defconfig
@@ -20,7 +20,7 @@  CONFIG_AUTOBOOT_KEYED=y
 CONFIG_AUTOBOOT_KEYED_CTRLC=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_SYSTEM_SETUP=y
-CONFIG_BOOTCOMMAND="if run check_button; then bootmenu; fi; run bootcmd_mmc0; poweroff;"
+CONFIG_BOOTCOMMAND="if run check_button; then bootmenu; fi; bootflow scan; poweroff;"
 CONFIG_SYS_PBSIZE=2084
 CONFIG_SPL_FOOTPRINT_LIMIT=y
 CONFIG_SPL_MAX_FOOTPRINT=0x8000
diff --git a/configs/grouper_common_defconfig b/configs/grouper_common_defconfig
index 02ed8dbba9..6a1b719142 100644
--- a/configs/grouper_common_defconfig
+++ b/configs/grouper_common_defconfig
@@ -20,7 +20,7 @@  CONFIG_AUTOBOOT_KEYED=y
 CONFIG_AUTOBOOT_KEYED_CTRLC=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_SYSTEM_SETUP=y
-CONFIG_BOOTCOMMAND="if run check_button; then bootmenu; fi; run bootcmd_mmc0; poweroff;"
+CONFIG_BOOTCOMMAND="if run check_button; then bootmenu; fi; bootflow scan; poweroff;"
 CONFIG_SYS_PBSIZE=2084
 CONFIG_SPL_FOOTPRINT_LIMIT=y
 CONFIG_SPL_MAX_FOOTPRINT=0x8000
diff --git a/configs/transformer_t30_defconfig b/configs/transformer_t30_defconfig
index e4f76973eb..a142d82883 100644
--- a/configs/transformer_t30_defconfig
+++ b/configs/transformer_t30_defconfig
@@ -20,7 +20,7 @@  CONFIG_AUTOBOOT_KEYED=y
 CONFIG_AUTOBOOT_KEYED_CTRLC=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_SYSTEM_SETUP=y
-CONFIG_BOOTCOMMAND="setenv skip_boot 0; setenv gpio_button 150; if run check_button; then poweroff; fi; setenv gpio_button 131; if run check_button; then bootmenu; fi; if test ${skip_boot} -eq 1; then; else run bootcmd_usb0; run bootcmd_mmc1; run bootcmd_mmc0; poweroff; fi"
+CONFIG_BOOTCOMMAND="setenv skip_boot 0; setenv gpio_button 150; if run check_button; then poweroff; fi; setenv gpio_button 131; if run check_button; then bootmenu; fi; if test ${skip_boot} -eq 1; then; else setenv boot_targets usb mmc1 mmc0; bootflow scan; poweroff; fi"
 CONFIG_SYS_PBSIZE=2084
 CONFIG_SPL_FOOTPRINT_LIMIT=y
 CONFIG_SPL_MAX_FOOTPRINT=0x8000
diff --git a/configs/x3_t30_defconfig b/configs/x3_t30_defconfig
index 094a7d0709..b777d66653 100644
--- a/configs/x3_t30_defconfig
+++ b/configs/x3_t30_defconfig
@@ -21,7 +21,7 @@  CONFIG_AUTOBOOT_KEYED=y
 CONFIG_AUTOBOOT_KEYED_CTRLC=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_SYSTEM_SETUP=y
-CONFIG_BOOTCOMMAND="if run check_button; then bootmenu; fi; run bootcmd_mmc1; run bootcmd_mmc0; poweroff;"
+CONFIG_BOOTCOMMAND="if run check_button; then bootmenu; fi; bootflow scan; poweroff;"
 CONFIG_SYS_PBSIZE=2084
 CONFIG_SPL_FOOTPRINT_LIMIT=y
 CONFIG_SPL_MAX_FOOTPRINT=0x8000