@@ -30,7 +30,7 @@ to understand the device tree in FIT image should be the one actually used, or
leave it absent to favor the stored sectors. It is easier to deploy the FIT
image with embedded static device tree to multiple boards.
-Macro CONFIG_SYS_SPL_ARGS_ADDR serves two purposes. One is the pointer to load
+Macro CONFIG_SPL_PAYLOAD_ARGS_ADDR serves two purposes. One is the pointer to load
the stored sectors to. Normally this is the static device tree. The second
purpose is the memory location of signature header for secure boot. After the
FIT image is loaded into memory, it is validated against the signature header
@@ -1063,7 +1063,7 @@ config SPL_OS_BOOT
Enable booting directly to an OS from SPL.
for more info read doc/README.falcon
-config SYS_SPL_ARGS_ADDR
+config SPL_PAYLOAD_ARGS_ADDR
hex "Address in memory to load 'args' file for Falcon Mode to"
depends on SPL_OS_BOOT
default 0x88000000 if ARCH_OMAP2PLUS
@@ -818,8 +818,8 @@ void board_init_r(gd_t *dummy1, ulong dummy2)
}
memset(&spl_image, '\0', sizeof(spl_image));
-#ifdef CONFIG_SYS_SPL_ARGS_ADDR
- spl_image.arg = (void *)CONFIG_SYS_SPL_ARGS_ADDR;
+#ifdef CONFIG_SPL_PAYLOAD_ARGS_ADDR
+ spl_image.arg = (void *)CONFIG_SPL_PAYLOAD_ARGS_ADDR;
#endif
spl_image.boot_device = BOOT_DEVICE_NONE;
board_boot_order(spl_boot_list);
@@ -877,8 +877,8 @@ void board_init_r(gd_t *dummy1, ulong dummy2)
#if CONFIG_IS_ENABLED(OS_BOOT)
case IH_OS_LINUX:
debug("Jumping to Linux\n");
-#if defined(CONFIG_SYS_SPL_ARGS_ADDR)
- spl_fixup_fdt((void *)CONFIG_SYS_SPL_ARGS_ADDR);
+#if defined(CONFIG_SPL_PAYLOAD_ARGS_ADDR)
+ spl_fixup_fdt((void *)CONFIG_SPL_PAYLOAD_ARGS_ADDR);
#endif
spl_board_prepare_for_linux();
jump_to_image_linux(&spl_image);
@@ -97,7 +97,7 @@ int spl_load_image_ext_os(struct spl_image_info *spl_image,
puts("spl: ext4fs_open failed\n");
goto defaults;
}
- err = ext4fs_read((void *)CONFIG_SYS_SPL_ARGS_ADDR, 0, filelen, &actlen);
+ err = ext4fs_read((void *)CONFIG_SPL_PAYLOAD_ARGS_ADDR, 0, filelen, &actlen);
if (err < 0) {
printf("spl: error reading image %s, err - %d, falling back to default\n",
file, err);
@@ -127,7 +127,7 @@ defaults:
if (err < 0)
puts("spl: ext4fs_open failed\n");
- err = ext4fs_read((void *)CONFIG_SYS_SPL_ARGS_ADDR, 0, filelen, &actlen);
+ err = ext4fs_read((void *)CONFIG_SPL_PAYLOAD_ARGS_ADDR, 0, filelen, &actlen);
if (err < 0) {
#ifdef CONFIG_SPL_LIBCOMMON_SUPPORT
printf("%s: error reading image %s, err - %d\n",
@@ -128,7 +128,7 @@ int spl_load_image_fat_os(struct spl_image_info *spl_image,
#if defined(CONFIG_SPL_ENV_SUPPORT) && defined(CONFIG_SPL_OS_BOOT)
file = env_get("falcon_args_file");
if (file) {
- err = file_fat_read(file, (void *)CONFIG_SYS_SPL_ARGS_ADDR, 0);
+ err = file_fat_read(file, (void *)CONFIG_SPL_PAYLOAD_ARGS_ADDR, 0);
if (err <= 0) {
printf("spl: error reading image %s, err - %d, falling back to default\n",
file, err);
@@ -153,7 +153,7 @@ defaults:
#endif
err = file_fat_read(CONFIG_SPL_FS_LOAD_ARGS_NAME,
- (void *)CONFIG_SYS_SPL_ARGS_ADDR, 0);
+ (void *)CONFIG_SPL_PAYLOAD_ARGS_ADDR, 0);
if (err <= 0) {
#ifdef CONFIG_SPL_LIBCOMMON_SUPPORT
printf("%s: error reading image %s, err - %d\n",
@@ -235,7 +235,7 @@ static int mmc_load_image_raw_os(struct spl_image_info *spl_image,
count = blk_dread(mmc_get_blk_desc(mmc),
CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR,
CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS,
- (void *) CONFIG_SYS_SPL_ARGS_ADDR);
+ (void *)CONFIG_SPL_PAYLOAD_ARGS_ADDR);
if (count != CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS) {
#ifdef CONFIG_SPL_LIBCOMMON_SUPPORT
puts("mmc_load_image_raw_os: mmc block read error\n");
@@ -159,11 +159,11 @@ static int spl_nand_load_image(struct spl_image_info *spl_image,
CONFIG_CMD_SPL_WRITE_SIZE,
(void *)CONFIG_TEXT_BASE);
/* copy to destintion */
- for (dst = (int *)CONFIG_SYS_SPL_ARGS_ADDR,
- src = (int *)CONFIG_TEXT_BASE;
- src < (int *)(CONFIG_TEXT_BASE +
- CONFIG_CMD_SPL_WRITE_SIZE);
- src++, dst++) {
+ for (dst = (int *)CONFIG_SPL_PAYLOAD_ARGS_ADDR,
+ src = (int *)CONFIG_TEXT_BASE;
+ src < (int *)(CONFIG_TEXT_BASE +
+ CONFIG_CMD_SPL_WRITE_SIZE);
+ src++, dst++) {
writel(readl(src), dst);
}
@@ -54,8 +54,8 @@ static int spl_nor_load_image(struct spl_image_info *spl_image,
CONFIG_SYS_OS_BASE,
(void *)header);
-#if defined CONFIG_SYS_SPL_ARGS_ADDR && defined CONFIG_CMD_SPL_NOR_OFS
- memcpy((void *)CONFIG_SYS_SPL_ARGS_ADDR,
+#if defined CONFIG_SPL_PAYLOAD_ARGS_ADDR && defined CONFIG_CMD_SPL_NOR_OFS
+ memcpy((void *)CONFIG_SPL_PAYLOAD_ARGS_ADDR,
(void *)CONFIG_CMD_SPL_NOR_OFS,
CONFIG_CMD_SPL_WRITE_SIZE);
#endif
@@ -74,8 +74,8 @@ static int spl_nor_load_image(struct spl_image_info *spl_image,
(void *)(CONFIG_SYS_OS_BASE +
sizeof(struct legacy_img_hdr)),
spl_image->size);
-#ifdef CONFIG_SYS_SPL_ARGS_ADDR
- spl_image->arg = (void *)CONFIG_SYS_SPL_ARGS_ADDR;
+#ifdef CONFIG_SPL_PAYLOAD_ARGS_ADDR
+ spl_image->arg = (void *)CONFIG_SPL_PAYLOAD_ARGS_ADDR;
#endif
return 0;
@@ -47,7 +47,7 @@ static int spi_load_image_os(struct spl_image_info *spl_image,
/* Read device tree. */
spi_flash_read(flash, CFG_SYS_SPI_ARGS_OFFS,
CFG_SYS_SPI_ARGS_SIZE,
- (void *)CONFIG_SYS_SPL_ARGS_ADDR);
+ (void *)CONFIG_SPL_PAYLOAD_ARGS_ADDR);
return 0;
}
@@ -50,7 +50,7 @@ int spl_ubi_load_image(struct spl_image_info *spl_image,
volumes[0].vol_id = CONFIG_SPL_UBI_LOAD_KERNEL_ID;
volumes[0].load_addr = (void *)CONFIG_SYS_LOAD_ADDR;
volumes[1].vol_id = CONFIG_SPL_UBI_LOAD_ARGS_ID;
- volumes[1].load_addr = (void *)CONFIG_SYS_SPL_ARGS_ADDR;
+ volumes[1].load_addr = (void *)CONFIG_SPL_PAYLOAD_ARGS_ADDR;
ret = ubispl_load_volumes(&info, volumes, 2);
if (!ret) {
@@ -14,7 +14,7 @@ static int spl_xip(struct spl_image_info *spl_image,
{
#if CONFIG_IS_ENABLED(OS_BOOT)
if (!spl_start_uboot()) {
- spl_image->arg = (void *)CONFIG_SYS_SPL_ARGS_ADDR;
+ spl_image->arg = (void *)CONFIG_SPL_PAYLOAD_ARGS_ADDR;
spl_image->name = "Linux";
spl_image->os = IH_OS_LINUX;
spl_image->load_addr = CONFIG_SYS_LOAD_ADDR;
@@ -33,7 +33,7 @@ CONFIG_SPL_NAND_ECC=y
CONFIG_SPL_NAND_SIMPLE=y
CONFIG_SPL_NAND_BASE=y
CONFIG_SPL_OS_BOOT=y
-CONFIG_SYS_SPL_ARGS_ADDR=0x84000000
+CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x84000000
CONFIG_SYS_NAND_SPL_KERNEL_OFFS=0x2a0000
CONFIG_SPL_FALCON_BOOT_MMCSD=y
CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1700
@@ -28,7 +28,7 @@ CONFIG_SPL_NAND_ECC=y
CONFIG_SPL_NAND_SIMPLE=y
CONFIG_SPL_NAND_BASE=y
CONFIG_SPL_OS_BOOT=y
-CONFIG_SYS_SPL_ARGS_ADDR=0x80000100
+CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x80000100
CONFIG_SYS_NAND_SPL_KERNEL_OFFS=0x280000
CONFIG_SPL_FALCON_BOOT_MMCSD=y
CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x500
@@ -46,7 +46,7 @@ CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_SAVEENV=y
CONFIG_SPL_I2C=y
CONFIG_SPL_OS_BOOT=y
-CONFIG_SYS_SPL_ARGS_ADDR=0x18000000
+CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x18000000
CONFIG_SPL_FALCON_BOOT_MMCSD=y
CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x100
CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR=0x3F00
@@ -41,7 +41,7 @@ CONFIG_SPL_SYS_MALLOC=y
CONFIG_SPL_DMA=y
CONFIG_SPL_I2C=y
CONFIG_SPL_OS_BOOT=y
-CONFIG_SYS_SPL_ARGS_ADDR=0x18000000
+CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x18000000
CONFIG_SPL_FALCON_BOOT_MMCSD=y
CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x100
CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR=0x3F00
@@ -50,7 +50,7 @@ CONFIG_SPL_FIT_IMAGE_TINY=y
CONFIG_SPL_DMA=y
CONFIG_SPL_I2C=y
CONFIG_SPL_OS_BOOT=y
-CONFIG_SYS_SPL_ARGS_ADDR=0x18000000
+CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x18000000
CONFIG_SPL_FALCON_BOOT_MMCSD=y
CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1000
CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR=0x800
@@ -51,7 +51,7 @@ CONFIG_SPL_DMA=y
CONFIG_SPL_I2C=y
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_SPL_OS_BOOT=y
-CONFIG_SYS_SPL_ARGS_ADDR=0x18000000
+CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x18000000
CONFIG_SYS_NAND_SPL_KERNEL_OFFS=0x1200000
CONFIG_SPL_FALCON_BOOT_MMCSD=y
CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1000
@@ -43,7 +43,7 @@ CONFIG_SPL_UBI_LOAD_KERNEL_ID=3
CONFIG_SPL_UBI_LOAD_ARGS_ID=4
CONFIG_SPL_ONENAND_SUPPORT=y
CONFIG_SPL_OS_BOOT=y
-CONFIG_SYS_SPL_ARGS_ADDR=0x84000000
+CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x84000000
CONFIG_SYS_NAND_SPL_KERNEL_OFFS=0x280000
CONFIG_SPL_FALCON_BOOT_MMCSD=y
CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1700
@@ -51,7 +51,7 @@ CONFIG_SPL_DMA=y
CONFIG_SPL_MMC_TINY=y
CONFIG_SPL_DM_SPI_FLASH=y
CONFIG_SPL_OS_BOOT=y
-CONFIG_SYS_SPL_ARGS_ADDR=0x44000000
+CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x44000000
CONFIG_SPL_FALCON_BOOT_MMCSD=y
CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x800
CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR=0x400
@@ -20,7 +20,7 @@ CONFIG_DISTRO_DEFAULTS=y
CONFIG_BOOTDELAY=3
CONFIG_SPL_SYS_MALLOC=y
CONFIG_SPL_OS_BOOT=y
-CONFIG_SYS_SPL_ARGS_ADDR=0x13000000
+CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x13000000
CONFIG_SPL_FALCON_BOOT_MMCSD=y
CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1000
CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR=0x800
@@ -36,7 +36,7 @@ CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot-dtb.img"
CONFIG_SPL_I2C=y
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_SPL_OS_BOOT=y
-CONFIG_SYS_SPL_ARGS_ADDR=0x18000000
+CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x18000000
CONFIG_SYS_NAND_SPL_KERNEL_OFFS=0x500000
CONFIG_SPL_FALCON_BOOT_MMCSD=y
CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1000
@@ -36,7 +36,7 @@ CONFIG_BOOTCOMMAND="run $modeboot"
CONFIG_SPL_RAW_IMAGE_SUPPORT=y
CONFIG_SPL_SYS_MALLOC=y
CONFIG_SPL_OS_BOOT=y
-CONFIG_SYS_SPL_ARGS_ADDR=0x18000000
+CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x18000000
CONFIG_SPL_FALCON_BOOT_MMCSD=y
CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1000
CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR=0x800
@@ -39,7 +39,7 @@ CONFIG_BOOTCOMMAND="run $modeboot"
CONFIG_SPL_RAW_IMAGE_SUPPORT=y
CONFIG_SPL_SYS_MALLOC=y
CONFIG_SPL_OS_BOOT=y
-CONFIG_SYS_SPL_ARGS_ADDR=0x18000000
+CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x18000000
CONFIG_SPL_FALCON_BOOT_MMCSD=y
CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1000
CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR=0x800
@@ -33,7 +33,7 @@ CONFIG_BOOTCOMMAND="run $modeboot"
CONFIG_SPL_RAW_IMAGE_SUPPORT=y
CONFIG_SPL_SYS_MALLOC=y
CONFIG_SPL_OS_BOOT=y
-CONFIG_SYS_SPL_ARGS_ADDR=0x18000000
+CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x18000000
CONFIG_SPL_FALCON_BOOT_MMCSD=y
CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1000
CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR=0x800
@@ -61,7 +61,7 @@ CONFIG_SPL_I2C=y
CONFIG_SPL_MPC8XXX_INIT_DDR=y
CONFIG_SPL_NOR_SUPPORT=y
CONFIG_SPL_OS_BOOT=y
-CONFIG_SYS_SPL_ARGS_ADDR=0x90000000
+CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x90000000
CONFIG_SYS_OS_BASE=0x40980000
CONFIG_SPL_WATCHDOG=y
CONFIG_SPL_TARGET="spl/u-boot-spl.pbl"
@@ -29,7 +29,7 @@ CONFIG_SPL_FIT_IMAGE_TINY=y
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_NOR_SUPPORT=y
CONFIG_SPL_OS_BOOT=y
-CONFIG_SYS_SPL_ARGS_ADDR=0x18000000
+CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x18000000
CONFIG_SYS_OS_BASE=0x8180000
CONFIG_SYS_MAXARGS=32
CONFIG_SYS_PBSIZE=532
@@ -37,7 +37,7 @@ CONFIG_SPL_NAND_ECC=y
CONFIG_SPL_NAND_SIMPLE=y
CONFIG_SPL_NAND_BASE=y
CONFIG_SPL_OS_BOOT=y
-CONFIG_SYS_SPL_ARGS_ADDR=0x84000000
+CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x84000000
CONFIG_SYS_NAND_SPL_KERNEL_OFFS=0x280000
CONFIG_SPL_FALCON_BOOT_MMCSD=y
CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1700
@@ -38,7 +38,7 @@ CONFIG_SPL_NAND_ECC=y
CONFIG_SPL_NAND_SIMPLE=y
CONFIG_SPL_NAND_BASE=y
CONFIG_SPL_OS_BOOT=y
-CONFIG_SYS_SPL_ARGS_ADDR=0x84000000
+CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x84000000
CONFIG_SYS_NAND_SPL_KERNEL_OFFS=0x280000
CONFIG_SPL_FALCON_BOOT_MMCSD=y
CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1700
@@ -36,7 +36,7 @@ CONFIG_SPL_NAND_ECC=y
CONFIG_SPL_NAND_SIMPLE=y
CONFIG_SPL_NAND_BASE=y
CONFIG_SPL_OS_BOOT=y
-CONFIG_SYS_SPL_ARGS_ADDR=0x84000000
+CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x84000000
CONFIG_SYS_NAND_SPL_KERNEL_OFFS=0x280000
CONFIG_SPL_FALCON_BOOT_MMCSD=y
CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1700
@@ -38,7 +38,7 @@ CONFIG_SPL_NAND_ECC=y
CONFIG_SPL_NAND_SIMPLE=y
CONFIG_SPL_NAND_BASE=y
CONFIG_SPL_OS_BOOT=y
-CONFIG_SYS_SPL_ARGS_ADDR=0x84000000
+CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x84000000
CONFIG_SYS_NAND_SPL_KERNEL_OFFS=0x280000
CONFIG_SPL_FALCON_BOOT_MMCSD=y
CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1700
@@ -35,7 +35,7 @@ CONFIG_SPL_FS_EXT4=y
CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot-dtb.img"
CONFIG_SPL_FS_LOAD_ARGS_NAME="imx6dl-riotboard.dtb"
CONFIG_SPL_OS_BOOT=y
-CONFIG_SYS_SPL_ARGS_ADDR=0x13000000
+CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x13000000
CONFIG_SYS_MAXARGS=32
CONFIG_SYS_PBSIZE=532
CONFIG_CMD_GPIO=y
@@ -37,7 +37,7 @@ CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_MTD_SUPPORT=y
CONFIG_SPL_XIP_SUPPORT=y
-CONFIG_SYS_SPL_ARGS_ADDR=0x80c0000
+CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x80c0000
CONFIG_SPL_DM_RESET=y
CONFIG_SYS_PBSIZE=1050
CONFIG_CMD_GPT=y
@@ -37,7 +37,7 @@ CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_MTD_SUPPORT=y
CONFIG_SPL_XIP_SUPPORT=y
-CONFIG_SYS_SPL_ARGS_ADDR=0x80c0000
+CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x80c0000
CONFIG_SPL_DM_RESET=y
CONFIG_SYS_PBSIZE=1050
CONFIG_CMD_GPT=y
@@ -36,7 +36,7 @@ CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_MTD_SUPPORT=y
CONFIG_SPL_XIP_SUPPORT=y
-CONFIG_SYS_SPL_ARGS_ADDR=0x81c0000
+CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x81c0000
CONFIG_SPL_DM_RESET=y
CONFIG_SYS_PBSIZE=1050
CONFIG_CMD_GPT=y
@@ -32,7 +32,7 @@ CONFIG_SPL_SYS_MALLOC=y
CONFIG_SPL_SYS_MALLOC_SIZE=0x2000000
CONFIG_SPL_FS_LOAD_ARGS_NAME="system.dtb"
CONFIG_SPL_OS_BOOT=y
-CONFIG_SYS_SPL_ARGS_ADDR=0x10000000
+CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x10000000
CONFIG_SYS_MAXARGS=32
CONFIG_SYS_PBSIZE=2071
CONFIG_SYS_BOOTM_LEN=0x3c00000
@@ -32,7 +32,7 @@ CONFIG_SPL_NO_BSS_LIMIT=y
CONFIG_SPL_STACK_R=y
CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000
CONFIG_SPL_OS_BOOT=y
-CONFIG_SYS_SPL_ARGS_ADDR=0xffe5000
+CONFIG_SPL_PAYLOAD_ARGS_ADDR=0xffe5000
CONFIG_SPL_FALCON_BOOT_MMCSD=y
CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x8800
CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR=0x8000
@@ -43,7 +43,7 @@ CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img"
CONFIG_SPL_FS_LOAD_ARGS_NAME="system.dtb"
CONFIG_SPL_FPGA=y
CONFIG_SPL_OS_BOOT=y
-CONFIG_SYS_SPL_ARGS_ADDR=0x10000000
+CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x10000000
CONFIG_SPL_SPI_LOAD=y
CONFIG_SYS_SPI_U_BOOT_OFFS=0x100000
CONFIG_SYS_MAXARGS=32
@@ -43,7 +43,7 @@ CONFIG_SPL_FS_LOAD_KERNEL_NAME="atf-uboot.ub"
CONFIG_SPL_FS_LOAD_ARGS_NAME="u-boot.bin"
CONFIG_SPL_FPGA=y
CONFIG_SPL_OS_BOOT=y
-CONFIG_SYS_SPL_ARGS_ADDR=0x8000000
+CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x8000000
CONFIG_SPL_RAM_SUPPORT=y
CONFIG_SPL_RAM_DEVICE=y
CONFIG_SPL_SPI_LOAD=y
@@ -63,7 +63,7 @@ CONFIG_CMD_SPL
Enable the "spl export" command.
The command "spl export" is then available in U-Boot mode.
-CONFIG_SYS_SPL_ARGS_ADDR
+CONFIG_SPL_PAYLOAD_ARGS_ADDR
Address in RAM where the parameters must be copied by SPL.
In most cases, it is <start_of_ram> + 0x100.
Rename this so that SPL is first, as per U-Boot convention. Also add PAYLOAD_ since this is where in memory the parameters for the payload have been stored. Signed-off-by: Simon Glass <sjg@chromium.org> --- (no changes since v2) Changes in v2: - Rename based on Tom's feedback arch/arm/cpu/armv8/fsl-layerscape/doc/README.falcon | 2 +- common/spl/Kconfig | 2 +- common/spl/spl.c | 8 ++++---- common/spl/spl_ext.c | 4 ++-- common/spl/spl_fat.c | 4 ++-- common/spl/spl_mmc.c | 2 +- common/spl/spl_nand.c | 10 +++++----- common/spl/spl_nor.c | 8 ++++---- common/spl/spl_spi.c | 2 +- common/spl/spl_ubi.c | 2 +- common/spl/spl_xip.c | 2 +- configs/am3517_evm_defconfig | 2 +- configs/devkit8000_defconfig | 2 +- configs/display5_defconfig | 2 +- configs/display5_factory_defconfig | 2 +- configs/gwventana_emmc_defconfig | 2 +- configs/gwventana_nand_defconfig | 2 +- configs/igep00x0_defconfig | 2 +- configs/imx28_xea_defconfig | 2 +- configs/imx6dl_mamoj_defconfig | 2 +- configs/imx6q_logic_defconfig | 2 +- configs/imx6qdl_icore_mipi_defconfig | 2 +- configs/imx6qdl_icore_mmc_defconfig | 2 +- configs/imx6qdl_icore_rqs_defconfig | 2 +- configs/ls1046ardb_qspi_spl_defconfig | 2 +- configs/mccmon6_nor_defconfig | 2 +- configs/omap35_logic_defconfig | 2 +- configs/omap35_logic_somlv_defconfig | 2 +- configs/omap3_logic_defconfig | 2 +- configs/omap3_logic_somlv_defconfig | 2 +- configs/riotboard_defconfig | 2 +- configs/stm32746g-eval_spl_defconfig | 2 +- configs/stm32f746-disco_spl_defconfig | 2 +- configs/stm32f769-disco_spl_defconfig | 2 +- configs/syzygy_hub_defconfig | 2 +- configs/vyasa-rk3288_defconfig | 2 +- configs/xilinx_zynq_virt_defconfig | 2 +- configs/xilinx_zynqmp_virt_defconfig | 2 +- doc/develop/falcon.rst | 2 +- 39 files changed, 51 insertions(+), 51 deletions(-)