new file mode 100644
@@ -0,0 +1,71 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/* Copyright (c) 2020-2021 Microchip Technology Inc */
+
+/ {
+ compatible = "microchip,mpfs-icicle-reference-rtlv2210", "microchip,mpfs-icicle-kit",
+ "microchip,mpfs";
+
+ core_pwm0: pwm@40000000 {
+ compatible = "microchip,corepwm-rtl-v4";
+ reg = <0x0 0x40000000 0x0 0xF0>;
+ microchip,sync-update-mask = /bits/ 32 <0>;
+ #pwm-cells = <3>;
+ clocks = <&ccc_nw CLK_CCC_PLL0_OUT3>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@40000200 {
+ compatible = "microchip,corei2c-rtl-v7";
+ reg = <0x0 0x40000200 0x0 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&ccc_nw CLK_CCC_PLL0_OUT3>;
+ interrupt-parent = <&plic>;
+ interrupts = <122>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
+
+ pcie: pcie@3000000000 {
+ compatible = "microchip,pcie-host-1.0";
+ #address-cells = <0x3>;
+ #interrupt-cells = <0x1>;
+ #size-cells = <0x2>;
+ device_type = "pci";
+ reg = <0x30 0x0 0x0 0x8000000>, <0x0 0x43000000 0x0 0x10000>;
+ reg-names = "cfg", "apb";
+ bus-range = <0x0 0x7f>;
+ interrupt-parent = <&plic>;
+ interrupts = <119>;
+ interrupt-map = <0 0 0 1 &pcie_intc 0>,
+ <0 0 0 2 &pcie_intc 1>,
+ <0 0 0 3 &pcie_intc 2>,
+ <0 0 0 4 &pcie_intc 3>;
+ interrupt-map-mask = <0 0 0 7>;
+ clocks = <&ccc_nw CLK_CCC_PLL0_OUT1>, <&ccc_nw CLK_CCC_PLL0_OUT3>;
+ clock-names = "fic1", "fic3";
+ ranges = <0x3000000 0x0 0x8000000 0x30 0x8000000 0x0 0x80000000>;
+ dma-ranges = <0x02000000 0x0 0x00000000 0x0 0x00000000 0x1 0x00000000>;
+ msi-parent = <&pcie>;
+ msi-controller;
+ status = "disabled";
+ pcie_intc: interrupt-controller {
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ };
+ };
+
+ refclk_ccc: cccrefclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ };
+};
+
+&ccc_nw {
+ clocks = <&refclk_ccc>, <&refclk_ccc>, <&refclk_ccc>, <&refclk_ccc>,
+ <&refclk_ccc>, <&refclk_ccc>;
+ clock-names = "pll0_ref0", "pll0_ref1", "pll1_ref0", "pll1_ref1",
+ "dll0_ref", "dll1_ref";
+ status = "okay";
+};
@@ -7,29 +7,63 @@
/dts-v1/;
#include "mpfs.dtsi"
+#include "mpfs-icicle-kit-fabric.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
/* Clock frequency (in Hz) of the rtcclk */
#define RTCCLK_FREQ 1000000
/ {
model = "Microchip PolarFire-SoC Icicle Kit";
- compatible = "microchip,mpfs-icicle-reference-rtlv2210",
- "microchip,mpfs-icicle-kit", "microchip,mpfs";
+ compatible = "microchip,mpfs-icicle-reference-rtlv2210", "microchip,mpfs-icicle-kit",
+ "microchip,mpfs";
aliases {
- serial1 = &uart1;
ethernet0 = &mac1;
- spi0 = &qspi;
+ serial0 = &mmuart0;
+ serial1 = &mmuart1;
+ serial2 = &mmuart2;
+ serial3 = &mmuart3;
+ serial4 = &mmuart4;
};
chosen {
- stdout-path = "serial1";
+ stdout-path = "serial1:115200n8";
};
cpus {
timebase-frequency = <RTCCLK_FREQ>;
};
+ leds {
+ compatible = "gpio-leds";
+
+ led-1 {
+ gpios = <&gpio2 16 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_RED>;
+ label = "led1";
+ };
+
+ led-2 {
+ gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_RED>;
+ label = "led2";
+ };
+
+ led-3 {
+ gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_AMBER>;
+ label = "led3";
+ };
+
+ led-4 {
+ gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_AMBER>;
+ label = "led4";
+ };
+ };
+
ddrc_cache_lo: memory@80000000 {
device_type = "memory";
reg = <0x0 0x80000000 0x0 0x40000000>;
@@ -54,83 +88,121 @@
};
};
-&refclk {
- clock-frequency = <125000000>;
+&core_pwm0 {
+ status = "okay";
};
-&uart1 {
+&gpio2 {
+ interrupts = <53>, <53>, <53>, <53>,
+ <53>, <53>, <53>, <53>,
+ <53>, <53>, <53>, <53>,
+ <53>, <53>, <53>, <53>,
+ <53>, <53>, <53>, <53>,
+ <53>, <53>, <53>, <53>,
+ <53>, <53>, <53>, <53>,
+ <53>, <53>, <53>, <53>;
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+};
+
+&i2c2 {
+ status = "okay";
+};
+
+&mac0 {
+ phy-mode = "sgmii";
+ phy-handle = <&phy0>;
+ status = "enabled";
+};
+
+&mac1 {
+ phy-mode = "sgmii";
+ phy-handle = <&phy1>;
+ status = "okay";
+
+ phy1: ethernet-phy@9 {
+ reg = <9>;
+ };
+
+ phy0: ethernet-phy@8 {
+ reg = <8>;
+ };
+};
+
+&mbox {
status = "okay";
};
&mmc {
- status = "okay";
-
bus-width = <4>;
disable-wp;
- cap-mmc-highspeed;
cap-sd-highspeed;
- card-detect-delay = <200>;
+ cap-mmc-highspeed;
mmc-ddr-1_8v;
mmc-hs200-1_8v;
sd-uhs-sdr12;
sd-uhs-sdr25;
sd-uhs-sdr50;
sd-uhs-sdr104;
+ status = "okay";
};
-&i2c1 {
+&mmuart1 {
status = "okay";
- clock-frequency = <100000>;
-
- pac193x: pac193x@10 {
- compatible = "microchip,pac1934";
- reg = <0x10>;
- samp-rate = <64>;
- status = "okay";
- ch1: channel0 {
- uohms-shunt-res = <10000>;
- rail-name = "VDDREG";
- channel_enabled;
- };
- ch2: channel1 {
- uohms-shunt-res = <10000>;
- rail-name = "VDDA25";
- channel_enabled;
- };
- ch3: channel2 {
- uohms-shunt-res = <10000>;
- rail-name = "VDD25";
- channel_enabled;
- };
- ch4: channel3 {
- uohms-shunt-res = <10000>;
- rail-name = "VDDA_REG";
- channel_enabled;
- };
- };
};
-&mac1 {
+&mmuart2 {
+ status = "okay";
+};
+
+&mmuart3 {
+ status = "okay";
+};
+
+&mmuart4 {
+ status = "okay";
+};
+
+&pcie {
status = "okay";
- phy-mode = "sgmii";
- phy-handle = <&phy1>;
- phy1: ethernet-phy@9 {
- reg = <9>;
- ti,fifo-depth = <0x1>;
- };
};
&qspi {
status = "okay";
- num-cs = <1>;
-
- flash0: flash@0 {
- compatible = "spi-nand";
- reg = <0x0>;
- spi-tx-bus-width = <4>;
- spi-rx-bus-width = <4>;
- spi-max-frequency = <20000000>;
- spi-cpol;
- spi-cpha;
- };
+};
+
+&refclk {
+ clock-frequency = <125000000>;
+};
+
+&refclk_ccc {
+ clock-frequency = <50000000>;
+};
+
+&rtc {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+};
+
+&spi1 {
+ status = "okay";
+};
+
+&syscontroller {
+ status = "okay";
+};
+
+&usb {
+ status = "okay";
+ dr_mode = "host";
};
@@ -2,8 +2,6 @@
/* Copyright (c) 2020-2021 Microchip Technology Inc */
#include "dt-bindings/clock/microchip-mpfs-clock.h"
-#include "dt-bindings/interrupt-controller/microchip-mpfs-plic.h"
-#include "dt-bindings/interrupt-controller/riscv-hart.h"
/ {
#address-cells = <2>;
@@ -11,9 +9,6 @@
model = "Microchip PolarFire SoC";
compatible = "microchip,mpfs";
- chosen {
- };
-
cpus {
#address-cells = <1>;
#size-cells = <0>;
@@ -28,12 +23,7 @@
riscv,isa = "rv64imac";
clocks = <&clkcfg CLK_CPU>;
status = "disabled";
- operating-points = <
- /* kHz uV */
- 600000 1100000
- 300000 950000
- 150000 750000
- >;
+
cpu0_intc: interrupt-controller {
#interrupt-cells = <1>;
compatible = "riscv,cpu-intc";
@@ -59,13 +49,9 @@
riscv,isa = "rv64imafdc";
clocks = <&clkcfg CLK_CPU>;
tlb-split;
+ next-level-cache = <&cctrllr>;
status = "okay";
- operating-points = <
- /* kHz uV */
- 600000 1100000
- 300000 950000
- 150000 750000
- >;
+
cpu1_intc: interrupt-controller {
#interrupt-cells = <1>;
compatible = "riscv,cpu-intc";
@@ -91,13 +77,9 @@
riscv,isa = "rv64imafdc";
clocks = <&clkcfg CLK_CPU>;
tlb-split;
+ next-level-cache = <&cctrllr>;
status = "okay";
- operating-points = <
- /* kHz uV */
- 600000 1100000
- 300000 950000
- 150000 750000
- >;
+
cpu2_intc: interrupt-controller {
#interrupt-cells = <1>;
compatible = "riscv,cpu-intc";
@@ -123,13 +105,9 @@
riscv,isa = "rv64imafdc";
clocks = <&clkcfg CLK_CPU>;
tlb-split;
+ next-level-cache = <&cctrllr>;
status = "okay";
- operating-points = <
- /* kHz uV */
- 600000 1100000
- 300000 950000
- 150000 750000
- >;
+
cpu3_intc: interrupt-controller {
#interrupt-cells = <1>;
compatible = "riscv,cpu-intc";
@@ -155,273 +133,322 @@
riscv,isa = "rv64imafdc";
clocks = <&clkcfg CLK_CPU>;
tlb-split;
+ next-level-cache = <&cctrllr>;
status = "okay";
- operating-points = <
- /* kHz uV */
- 600000 1100000
- 300000 950000
- 150000 750000
- >;
cpu4_intc: interrupt-controller {
#interrupt-cells = <1>;
compatible = "riscv,cpu-intc";
interrupt-controller;
};
};
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&cpu0>;
+ };
+
+ core1 {
+ cpu = <&cpu1>;
+ };
+
+ core2 {
+ cpu = <&cpu2>;
+ };
+
+ core3 {
+ cpu = <&cpu3>;
+ };
+
+ core4 {
+ cpu = <&cpu4>;
+ };
+ };
+ };
};
- refclk: refclk {
+ refclk: mssrefclk {
compatible = "fixed-clock";
#clock-cells = <0>;
};
+ syscontroller: syscontroller {
+ compatible = "microchip,mpfs-sys-controller";
+ mboxes = <&mbox 0>;
+ };
+
soc {
#address-cells = <2>;
#size-cells = <2>;
- compatible = "microchip,mpfs-soc", "simple-bus";
+ compatible = "simple-bus";
ranges;
- clint: clint@2000000 {
- compatible = "sifive,clint0";
- reg = <0x0 0x2000000 0x0 0xC000>;
- interrupts-extended =
- <&cpu0_intc HART_INT_M_SOFT &cpu0_intc HART_INT_M_TIMER
- &cpu1_intc HART_INT_M_SOFT &cpu1_intc HART_INT_M_TIMER
- &cpu2_intc HART_INT_M_SOFT &cpu2_intc HART_INT_M_TIMER
- &cpu3_intc HART_INT_M_SOFT &cpu3_intc HART_INT_M_TIMER
- &cpu4_intc HART_INT_M_SOFT &cpu4_intc HART_INT_M_TIMER>;
- };
-
- cachecontroller: cache-controller@2010000 {
- compatible = "sifive,fu540-c000-ccache", "cache";
+ cctrllr: cache-controller@2010000 {
+ compatible = "microchip,mpfs-ccache", "sifive,fu540-c000-ccache", "cache";
reg = <0x0 0x2010000 0x0 0x1000>;
- interrupt-parent = <&plic>;
- interrupts = <PLIC_INT_L2_METADATA_CORR
- PLIC_INT_L2_METADATA_UNCORR
- PLIC_INT_L2_DATA_CORR>;
cache-block-size = <64>;
cache-level = <2>;
cache-sets = <1024>;
cache-size = <2097152>;
cache-unified;
+ interrupt-parent = <&plic>;
+ interrupts = <1>, <3>, <4>, <2>;
};
- pdma: pdma@3000000 {
- compatible = "microchip,mpfs-pdma-uio","sifive,fu540-c000-pdma";
- reg = <0x0 0x3000000 0x0 0x8000>;
- interrupt-parent = <&plic>;
- interrupts = <PLIC_INT_DMA_CH0_DONE PLIC_INT_DMA_CH0_ERR
- PLIC_INT_DMA_CH1_DONE PLIC_INT_DMA_CH1_ERR
- PLIC_INT_DMA_CH2_DONE PLIC_INT_DMA_CH2_ERR
- PLIC_INT_DMA_CH3_DONE PLIC_INT_DMA_CH3_ERR>;
- #dma-cells = <1>;
+ clint: clint@2000000 {
+ compatible = "sifive,fu540-c000-clint", "sifive,clint0";
+ reg = <0x0 0x2000000 0x0 0xC000>;
+ interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>,
+ <&cpu1_intc 3>, <&cpu1_intc 7>,
+ <&cpu2_intc 3>, <&cpu2_intc 7>,
+ <&cpu3_intc 3>, <&cpu3_intc 7>,
+ <&cpu4_intc 3>, <&cpu4_intc 7>;
};
plic: interrupt-controller@c000000 {
- compatible = "sifive,plic-1.0.0";
+ compatible = "sifive,fu540-c000-plic", "sifive,plic-1.0.0";
reg = <0x0 0xc000000 0x0 0x4000000>;
+ #address-cells = <0>;
#interrupt-cells = <1>;
- riscv,ndev = <186>;
interrupt-controller;
- interrupts-extended = <&cpu0_intc HART_INT_M_EXT
- &cpu1_intc HART_INT_M_EXT &cpu1_intc HART_INT_S_EXT
- &cpu2_intc HART_INT_M_EXT &cpu2_intc HART_INT_S_EXT
- &cpu3_intc HART_INT_M_EXT &cpu3_intc HART_INT_S_EXT
- &cpu4_intc HART_INT_M_EXT &cpu4_intc HART_INT_S_EXT>;
+ interrupts-extended = <&cpu0_intc 11>,
+ <&cpu1_intc 11>, <&cpu1_intc 9>,
+ <&cpu2_intc 11>, <&cpu2_intc 9>,
+ <&cpu3_intc 11>, <&cpu3_intc 9>,
+ <&cpu4_intc 11>, <&cpu4_intc 9>;
+ riscv,ndev = <186>;
+ };
+
+ pdma: dma-controller@3000000 {
+ compatible = "sifive,fu540-c000-pdma", "sifive,pdma0";
+ reg = <0x0 0x3000000 0x0 0x8000>;
+ interrupt-parent = <&plic>;
+ interrupts = <5 6>, <7 8>, <9 10>, <11 12>;
+ dma-channels = <4>;
+ #dma-cells = <1>;
};
clkcfg: clkcfg@20002000 {
compatible = "microchip,mpfs-clkcfg";
reg = <0x0 0x20002000 0x0 0x1000>, <0x0 0x3E001000 0x0 0x1000>;
- reg-names = "mss_sysreg";
clocks = <&refclk>;
#clock-cells = <1>;
- clock-output-names = "cpu", "axi", "ahb", "envm", /* 0-3 */
- "mac0", "mac1", "mmc", "timer", /* 4-7 */
- "mmuart0", "mmuart1", "mmuart2", "mmuart3", /* 8-11 */
- "mmuart4", "spi0", "spi1", "i2c0", /* 12-15 */
- "i2c1", "can0", "can1", "usb", /* 16-19 */
- "rsvd", "rtc", "qspi", "gpio0", /* 20-23 */
- "gpio1", "gpio2", "ddrc", "fic0", /* 24-27 */
- "fic1", "fic2", "fic3", "athena", "cfm"; /* 28-32 */
+ #reset-cells = <1>;
};
- /* Common node entry for eMMC/SD */
- mmc: mmc@20008000 {
- compatible = "microchip,mpfs-sd4hc","cdns,sd4hc";
- reg = <0x0 0x20008000 0x0 0x1000>;
- clocks = <&clkcfg CLK_MMC>;
- interrupt-parent = <&plic>;
- interrupts = <PLIC_INT_MMC_MAIN PLIC_INT_MMC_WAKEUP>;
- max-frequency = <200000000>;
+ ccc_se: clock-controller@38010000 {
+ compatible = "microchip,mpfs-ccc";
+ reg = <0x0 0x38010000 0x0 0x1000>, <0x0 0x38020000 0x0 0x1000>,
+ <0x0 0x39010000 0x0 0x1000>, <0x0 0x39020000 0x0 0x1000>;
+ #clock-cells = <1>;
status = "disabled";
};
- uart0: serial@20000000 {
+ ccc_ne: clock-controller@38040000 {
+ compatible = "microchip,mpfs-ccc";
+ reg = <0x0 0x38040000 0x0 0x1000>, <0x0 0x38080000 0x0 0x1000>,
+ <0x0 0x39040000 0x0 0x1000>, <0x0 0x39080000 0x0 0x1000>;
+ #clock-cells = <1>;
+ status = "disabled";
+ };
+
+ ccc_nw: clock-controller@38100000 {
+ compatible = "microchip,mpfs-ccc";
+ reg = <0x0 0x38100000 0x0 0x1000>, <0x0 0x38200000 0x0 0x1000>,
+ <0x0 0x39100000 0x0 0x1000>, <0x0 0x39200000 0x0 0x1000>;
+ #clock-cells = <1>;
+ status = "disabled";
+ };
+
+ ccc_sw: clock-controller@38400000 {
+ compatible = "microchip,mpfs-ccc";
+ reg = <0x0 0x38400000 0x0 0x1000>, <0x0 0x38800000 0x0 0x1000>,
+ <0x0 0x39400000 0x0 0x1000>, <0x0 0x39800000 0x0 0x1000>;
+ #clock-cells = <1>;
+ status = "disabled";
+ };
+
+ mmuart0: serial@20000000 {
compatible = "ns16550a";
reg = <0x0 0x20000000 0x0 0x400>;
reg-io-width = <4>;
reg-shift = <2>;
interrupt-parent = <&plic>;
- interrupts = <PLIC_INT_MMUART0>;
+ interrupts = <90>;
+ current-speed = <115200>;
clocks = <&clkcfg CLK_MMUART0>;
status = "disabled"; /* Reserved for the HSS */
};
- uart1: serial@20100000 {
+ mmuart1: serial@20100000 {
compatible = "ns16550a";
reg = <0x0 0x20100000 0x0 0x400>;
reg-io-width = <4>;
reg-shift = <2>;
interrupt-parent = <&plic>;
- interrupts = <PLIC_INT_MMUART1>;
+ interrupts = <91>;
+ current-speed = <115200>;
clocks = <&clkcfg CLK_MMUART1>;
status = "disabled";
};
- uart2: serial@20102000 {
+ mmuart2: serial@20102000 {
compatible = "ns16550a";
reg = <0x0 0x20102000 0x0 0x400>;
reg-io-width = <4>;
reg-shift = <2>;
interrupt-parent = <&plic>;
- interrupts = <PLIC_INT_MMUART2>;
+ interrupts = <92>;
+ current-speed = <115200>;
clocks = <&clkcfg CLK_MMUART2>;
status = "disabled";
};
- uart3: serial@20104000 {
+ mmuart3: serial@20104000 {
compatible = "ns16550a";
reg = <0x0 0x20104000 0x0 0x400>;
reg-io-width = <4>;
reg-shift = <2>;
interrupt-parent = <&plic>;
- interrupts = <PLIC_INT_MMUART3>;
+ interrupts = <93>;
+ current-speed = <115200>;
clocks = <&clkcfg CLK_MMUART3>;
status = "disabled";
};
- uart4: serial@20106000 {
+ mmuart4: serial@20106000 {
compatible = "ns16550a";
reg = <0x0 0x20106000 0x0 0x400>;
reg-io-width = <4>;
reg-shift = <2>;
interrupt-parent = <&plic>;
- interrupts = <PLIC_INT_MMUART4>;
+ interrupts = <94>;
clocks = <&clkcfg CLK_MMUART4>;
+ current-speed = <115200>;
+ status = "disabled";
+ };
+
+ /* Common node entry for emmc/sd */
+ mmc: mmc@20008000 {
+ compatible = "microchip,mpfs-sd4hc", "cdns,sd4hc";
+ reg = <0x0 0x20008000 0x0 0x1000>;
+ interrupt-parent = <&plic>;
+ interrupts = <88>;
+ clocks = <&clkcfg CLK_MMC>;
+ max-frequency = <200000000>;
status = "disabled";
};
spi0: spi@20108000 {
compatible = "microchip,mpfs-spi";
- reg = <0x0 0x20108000 0x0 0x1000>;
- clocks = <&clkcfg CLK_SPI0>;
- interrupt-parent = <&plic>;
- interrupts = <PLIC_INT_SPI0>;
- num-cs = <8>;
#address-cells = <1>;
#size-cells = <0>;
+ reg = <0x0 0x20108000 0x0 0x1000>;
+ interrupt-parent = <&plic>;
+ interrupts = <54>;
+ clocks = <&clkcfg CLK_SPI0>;
status = "disabled";
};
spi1: spi@20109000 {
compatible = "microchip,mpfs-spi";
- reg = <0x0 0x20109000 0x0 0x1000>;
- clocks = <&clkcfg CLK_SPI1>;
- interrupt-parent = <&plic>;
- interrupts = <PLIC_INT_SPI1>;
- num-cs = <8>;
#address-cells = <1>;
#size-cells = <0>;
+ reg = <0x0 0x20109000 0x0 0x1000>;
+ interrupt-parent = <&plic>;
+ interrupts = <55>;
+ clocks = <&clkcfg CLK_SPI1>;
+ status = "disabled";
+ };
+
+ qspi: spi@21000000 {
+ compatible = "microchip,mpfs-qspi", "microchip,coreqspi-rtl-v2";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x21000000 0x0 0x1000>;
+ interrupt-parent = <&plic>;
+ interrupts = <85>;
+ clocks = <&clkcfg CLK_QSPI>;
status = "disabled";
};
i2c0: i2c@2010a000 {
- compatible = "microchip,mpfs-i2c";
+ compatible = "microchip,mpfs-i2c", "microchip,corei2c-rtl-v7";
reg = <0x0 0x2010a000 0x0 0x1000>;
- clocks = <&clkcfg CLK_I2C0>;
- interrupt-parent = <&plic>;
- interrupts = <PLIC_INT_I2C0_MAIN>;
#address-cells = <1>;
#size-cells = <0>;
+ interrupt-parent = <&plic>;
+ interrupts = <58>;
+ clocks = <&clkcfg CLK_I2C0>;
+ clock-frequency = <100000>;
status = "disabled";
};
i2c1: i2c@2010b000 {
- compatible = "microchip,mpfs-i2c";
+ compatible = "microchip,mpfs-i2c", "microchip,corei2c-rtl-v7";
reg = <0x0 0x2010b000 0x0 0x1000>;
- clocks = <&clkcfg CLK_I2C1>;
- interrupt-parent = <&plic>;
- interrupts = <PLIC_INT_I2C1_MAIN>;
#address-cells = <1>;
#size-cells = <0>;
+ interrupt-parent = <&plic>;
+ interrupts = <61>;
+ clocks = <&clkcfg CLK_I2C1>;
+ clock-frequency = <100000>;
status = "disabled";
};
can0: can@2010c000 {
- compatible = "microchip,mpfs-can-uio";
+ compatible = "microchip,mpfs-can";
reg = <0x0 0x2010c000 0x0 0x1000>;
clocks = <&clkcfg CLK_CAN0>;
interrupt-parent = <&plic>;
- interrupts = <PLIC_INT_CAN0>;
- #address-cells = <1>;
- #size-cells = <0>;
+ interrupts = <56>;
status = "disabled";
};
can1: can@2010d000 {
- compatible = "microchip,mpfs-can-uio";
+ compatible = "microchip,mpfs-can";
reg = <0x0 0x2010d000 0x0 0x1000>;
clocks = <&clkcfg CLK_CAN1>;
interrupt-parent = <&plic>;
- interrupts = <PLIC_INT_CAN1>;
- #address-cells = <1>;
- #size-cells = <0>;
+ interrupts = <57>;
status = "disabled";
};
mac0: ethernet@20110000 {
- compatible = "cdns,macb";
+ compatible = "microchip,mpfs-macb", "cdns,macb";
reg = <0x0 0x20110000 0x0 0x2000>;
- clocks = <&clkcfg CLK_MAC0>, <&clkcfg CLK_AHB>;
- clock-names = "pclk", "hclk";
- interrupt-parent = <&plic>;
- interrupts = <PLIC_INT_MAC0_INT
- PLIC_INT_MAC0_QUEUE1
- PLIC_INT_MAC0_QUEUE2
- PLIC_INT_MAC0_QUEUE3
- PLIC_INT_MAC0_EMAC
- PLIC_INT_MAC0_MMSL>;
- local-mac-address = [00 00 00 00 00 00];
- status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
+ interrupt-parent = <&plic>;
+ interrupts = <64>, <65>, <66>, <67>, <68>, <69>;
+ local-mac-address = [00 00 00 00 00 00];
+ clocks = <&clkcfg CLK_MAC0>, <&clkcfg CLK_AHB>;
+ clock-names = "pclk", "hclk";
+ resets = <&clkcfg CLK_MAC0>;
+ status = "disabled";
};
mac1: ethernet@20112000 {
- compatible = "cdns,macb";
+ compatible = "microchip,mpfs-macb", "cdns,macb";
reg = <0x0 0x20112000 0x0 0x2000>;
- clocks = <&clkcfg CLK_MAC1>, <&clkcfg CLK_AHB>;
- clock-names = "pclk", "hclk";
- interrupt-parent = <&plic>;
- interrupts = <PLIC_INT_MAC1_INT
- PLIC_INT_MAC1_QUEUE1
- PLIC_INT_MAC1_QUEUE2
- PLIC_INT_MAC1_QUEUE3
- PLIC_INT_MAC1_EMAC
- PLIC_INT_MAC1_MMSL>;
- local-mac-address = [00 00 00 00 00 00];
- status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
+ interrupt-parent = <&plic>;
+ interrupts = <70>, <71>, <72>, <73>, <74>, <75>;
+ local-mac-address = [00 00 00 00 00 00];
+ clocks = <&clkcfg CLK_MAC1>, <&clkcfg CLK_AHB>;
+ clock-names = "pclk", "hclk";
+ resets = <&clkcfg CLK_MAC1>;
+ status = "disabled";
};
gpio0: gpio@20120000 {
compatible = "microchip,mpfs-gpio";
reg = <0x0 0x20120000 0x0 0x1000>;
- reg-names = "control";
- clocks = <&clkcfg CLK_GPIO0>;
interrupt-parent = <&plic>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ clocks = <&clkcfg CLK_GPIO0>;
gpio-controller;
#gpio-cells = <2>;
status = "disabled";
@@ -429,10 +456,11 @@
gpio1: gpio@20121000 {
compatible = "microchip,mpfs-gpio";
- reg = <000 0x20121000 0x0 0x1000>;
- reg-names = "control";
- clocks = <&clkcfg CLK_GPIO1>;
+ reg = <0x0 0x20121000 0x0 0x1000>;
interrupt-parent = <&plic>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ clocks = <&clkcfg CLK_GPIO1>;
gpio-controller;
#gpio-cells = <2>;
status = "disabled";
@@ -441,9 +469,10 @@
gpio2: gpio@20122000 {
compatible = "microchip,mpfs-gpio";
reg = <0x0 0x20122000 0x0 0x1000>;
- reg-names = "control";
- clocks = <&clkcfg CLK_GPIO2>;
interrupt-parent = <&plic>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ clocks = <&clkcfg CLK_GPIO2>;
gpio-controller;
#gpio-cells = <2>;
status = "disabled";
@@ -452,118 +481,31 @@
rtc: rtc@20124000 {
compatible = "microchip,mpfs-rtc";
reg = <0x0 0x20124000 0x0 0x1000>;
- clocks = <&clkcfg CLK_RTC>;
- clock-names = "rtc";
interrupt-parent = <&plic>;
- interrupts = <PLIC_INT_RTC_WAKEUP PLIC_INT_RTC_MATCH>;
- #address-cells = <1>;
- #size-cells = <0>;
+ interrupts = <80>, <81>;
+ clocks = <&clkcfg CLK_RTC>, <&clkcfg CLK_RTCREF>;
+ clock-names = "rtc", "rtcref";
status = "disabled";
};
usb: usb@20201000 {
- compatible = "microchip,mpfs-usb-host";
+ compatible = "microchip,mpfs-musb";
reg = <0x0 0x20201000 0x0 0x1000>;
- reg-names = "mc","control";
+ interrupt-parent = <&plic>;
+ interrupts = <86>, <87>;
clocks = <&clkcfg CLK_USB>;
- interrupt-parent = <&plic>;
- interrupts = <PLIC_INT_USB_DMA PLIC_INT_USB_MC>;
interrupt-names = "dma","mc";
- dr_mode = "host";
- status = "disabled";
- };
-
- qspi: qspi@21000000 {
- compatible = "microchip,mpfs-qspi";
- reg = <0x0 0x21000000 0x0 0x1000>;
- clocks = <&clkcfg CLK_QSPI>;
- interrupt-parent = <&plic>;
- interrupts = <PLIC_INT_QSPI>;
- num-cs = <8>;
- #address-cells = <1>;
- #size-cells = <0>;
status = "disabled";
};
mbox: mailbox@37020000 {
compatible = "microchip,mpfs-mailbox";
- reg = <0x0 0x37020000 0x0 0x1000>, <0x0 0x2000318C 0x0 0x40>;
+ reg = <0x0 0x37020000 0x0 0x58>, <0x0 0x2000318C 0x0 0x40>,
+ <0x0 0x37020800 0x0 0x100>;
interrupt-parent = <&plic>;
- interrupts = <PLIC_INT_G5C_MESSAGE>;
+ interrupts = <96>;
#mbox-cells = <1>;
status = "disabled";
};
-
- pcie: pcie@2000000000 {
- compatible = "microchip,pcie-host-1.0";
- #address-cells = <0x3>;
- #interrupt-cells = <0x1>;
- #size-cells = <0x2>;
- device_type = "pci";
- reg = <0x20 0x0 0x0 0x8000000 0x0 0x43000000 0x0 0x10000>;
- reg-names = "cfg", "apb";
- clocks = <&clkcfg CLK_FIC0>, <&clkcfg CLK_FIC1>, <&clkcfg CLK_FIC3>;
- clock-names = "fic0", "fic1", "fic3";
- bus-range = <0x0 0x7f>;
- interrupt-parent = <&plic>;
- interrupts = <PLIC_INT_FABRIC_F2H_2>;
- interrupt-map = <0 0 0 1 &pcie_intc 0>,
- <0 0 0 2 &pcie_intc 1>,
- <0 0 0 3 &pcie_intc 2>,
- <0 0 0 4 &pcie_intc 3>;
- interrupt-map-mask = <0 0 0 7>;
- ranges = <0x3000000 0x0 0x8000000 0x20 0x8000000 0x0 0x80000000>;
- msi-parent = <&pcie>;
- msi-controller;
- mchp,axi-m-atr0 = <0x10 0x0>;
- status = "disabled";
- pcie_intc: legacy-interrupt-controller {
- #address-cells = <0>;
- #interrupt-cells = <1>;
- interrupt-controller;
- };
- };
-
- syscontroller: syscontroller {
- compatible = "microchip,mpfs-sys-controller";
- #address-cells = <1>;
- #size-cells = <1>;
- mboxes = <&mbox 0>;
- };
-
- hwrandom: hwrandom {
- compatible = "microchip,mpfs-rng";
- #address-cells = <1>;
- #size-cells = <1>;
- syscontroller = <&syscontroller>;
- };
-
- serialnum: serialnum {
- compatible = "microchip,mpfs-serial-number";
- #address-cells = <1>;
- #size-cells = <1>;
- syscontroller = <&syscontroller>;
- };
-
- fpgadigest: fpgadigest {
- compatible = "microchip,mpfs-digest";
- #address-cells = <1>;
- #size-cells = <1>;
- syscontroller = <&syscontroller>;
- };
-
- devicecert: cert {
- compatible = "microchip,mpfs-device-cert";
- #address-cells = <1>;
- #size-cells = <1>;
- syscontroller = <&syscontroller>;
- };
-
- signature: signature {
- compatible = "microchip,mpfs-signature";
- #address-cells = <1>;
- #size-cells = <1>;
- syscontroller = <&syscontroller>;
- };
};
};
@@ -1,7 +1,7 @@
-/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
/*
- * Copyright (C) 2020 Microchip Technology Inc.
- * Padmarao Begari <padmarao.begari@microchip.com>
+ * Daire McNamara,<daire.mcnamara@microchip.com>
+ * Copyright (C) 2020-2022 Microchip Technology Inc. All rights reserved.
*/
#ifndef _DT_BINDINGS_CLK_MICROCHIP_MPFS_H_
@@ -45,4 +45,27 @@
#define CLK_RTCREF 33
#define CLK_MSSPLL 34
+/* Clock Conditioning Circuitry Clock IDs */
+
+#define CLK_CCC_PLL0 0
+#define CLK_CCC_PLL1 1
+#define CLK_CCC_DLL0 2
+#define CLK_CCC_DLL1 3
+
+#define CLK_CCC_PLL0_OUT0 4
+#define CLK_CCC_PLL0_OUT1 5
+#define CLK_CCC_PLL0_OUT2 6
+#define CLK_CCC_PLL0_OUT3 7
+
+#define CLK_CCC_PLL1_OUT0 8
+#define CLK_CCC_PLL1_OUT1 9
+#define CLK_CCC_PLL1_OUT2 10
+#define CLK_CCC_PLL1_OUT3 11
+
+#define CLK_CCC_DLL0_OUT0 12
+#define CLK_CCC_DLL0_OUT1 13
+
+#define CLK_CCC_DLL1_OUT0 14
+#define CLK_CCC_DLL1_OUT1 15
+
#endif /* _DT_BINDINGS_CLK_MICROCHIP_MPFS_H_ */
deleted file mode 100644
@@ -1,196 +0,0 @@
-/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
-/* Copyright (c) 2020-2021 Microchip Technology Inc */
-
-#ifndef _DT_BINDINGS_INTERRUPT_CONTROLLER_MICROCHIP_MPFS_PLIC_H
-#define _DT_BINDINGS_INTERRUPT_CONTROLLER_MICROCHIP_MPFS_PLIC_H
-
-#define PLIC_INT_INVALID 0
-#define PLIC_INT_L2_METADATA_CORR 1
-#define PLIC_INT_L2_METADATA_UNCORR 2
-#define PLIC_INT_L2_DATA_CORR 3
-#define PLIC_INT_L2_DATA_UNCORR 4
-#define PLIC_INT_DMA_CH0_DONE 5
-#define PLIC_INT_DMA_CH0_ERR 6
-#define PLIC_INT_DMA_CH1_DONE 7
-#define PLIC_INT_DMA_CH1_ERR 8
-#define PLIC_INT_DMA_CH2_DONE 9
-#define PLIC_INT_DMA_CH2_ERR 10
-#define PLIC_INT_DMA_CH3_DONE 11
-#define PLIC_INT_DMA_CH3_ERR 12
-
-#define PLIC_INT_GPIO0_BIT0_OR_GPIO2_BIT0 13
-#define PLIC_INT_GPIO0_BIT1_OR_GPIO2_BIT1 14
-#define PLIC_INT_GPIO0_BIT2_OR_GPIO2_BIT2 15
-#define PLIC_INT_GPIO0_BIT3_OR_GPIO2_BIT3 16
-#define PLIC_INT_GPIO0_BIT4_OR_GPIO2_BIT4 17
-#define PLIC_INT_GPIO0_BIT5_OR_GPIO2_BIT5 18
-#define PLIC_INT_GPIO0_BIT6_OR_GPIO2_BIT6 19
-#define PLIC_INT_GPIO0_BIT7_OR_GPIO2_BIT7 20
-#define PLIC_INT_GPIO0_BIT8_OR_GPIO2_BIT8 21
-#define PLIC_INT_GPIO0_BIT9_OR_GPIO2_BIT9 22
-#define PLIC_INT_GPIO0_BIT10_OR_GPIO2_BIT10 23
-#define PLIC_INT_GPIO0_BIT11_OR_GPIO2_BIT11 24
-#define PLIC_INT_GPIO0_BIT12_OR_GPIO2_BIT12 25
-#define PLIC_INT_GPIO0_BIT13_OR_GPIO2_BIT13 26
-#define PLIC_INT_GPIO1_BIT0_OR_GPIO2_BIT14 27
-#define PLIC_INT_GPIO1_BIT1_OR_GPIO2_BIT15 28
-#define PLIC_INT_GPIO1_BIT2_OR_GPIO2_BIT16 29
-#define PLIC_INT_GPIO1_BIT3_OR_GPIO2_BIT17 30
-#define PLIC_INT_GPIO1_BIT4_OR_GPIO2_BIT18 31
-#define PLIC_INT_GPIO1_BIT5_OR_GPIO2_BIT19 32
-#define PLIC_INT_GPIO1_BIT6_OR_GPIO2_BIT20 33
-#define PLIC_INT_GPIO1_BIT7_OR_GPIO2_BIT21 34
-#define PLIC_INT_GPIO1_BIT8_OR_GPIO2_BIT22 35
-#define PLIC_INT_GPIO1_BIT9_OR_GPIO2_BIT23 36
-#define PLIC_INT_GPIO1_BIT10_OR_GPIO2_BIT24 37
-#define PLIC_INT_GPIO1_BIT11_OR_GPIO2_BIT25 38
-#define PLIC_INT_GPIO1_BIT12_OR_GPIO2_BIT26 39
-#define PLIC_INT_GPIO1_BIT13_OR_GPIO2_BIT27 40
-#define PLIC_INT_GPIO1_BIT14_OR_GPIO2_BIT28 41
-#define PLIC_INT_GPIO1_BIT15_OR_GPIO2_BIT29 42
-#define PLIC_INT_GPIO1_BIT16_OR_GPIO2_BIT30 43
-#define PLIC_INT_GPIO1_BIT17_OR_GPIO2_BIT31 44
-#define PLIC_INT_GPIO1_BIT18 45
-#define PLIC_INT_GPIO1_BIT19 46
-#define PLIC_INT_GPIO1_BIT20 47
-#define PLIC_INT_GPIO1_BIT21 48
-#define PLIC_INT_GPIO1_BIT22 49
-#define PLIC_INT_GPIO1_BIT23 50
-#define PLIC_INT_GPIO0_NON_DIRECT 51
-#define PLIC_INT_GPIO1_NON_DIRECT 52
-#define PLIC_INT_GPIO2_NON_DIRECT 53
-#define PLIC_INT_SPI0 54
-#define PLIC_INT_SPI1 55
-#define PLIC_INT_CAN0 56
-#define PLIC_INT_CAN1 57
-#define PLIC_INT_I2C0_MAIN 58
-#define PLIC_INT_I2C0_ALERT 59
-#define PLIC_INT_I2C0_SUS 60
-#define PLIC_INT_I2C1_MAIN 61
-#define PLIC_INT_I2C1_ALERT 62
-#define PLIC_INT_I2C1_SUS 63
-#define PLIC_INT_MAC0_INT 64
-#define PLIC_INT_MAC0_QUEUE1 65
-#define PLIC_INT_MAC0_QUEUE2 66
-#define PLIC_INT_MAC0_QUEUE3 67
-#define PLIC_INT_MAC0_EMAC 68
-#define PLIC_INT_MAC0_MMSL 69
-#define PLIC_INT_MAC1_INT 70
-#define PLIC_INT_MAC1_QUEUE1 71
-#define PLIC_INT_MAC1_QUEUE2 72
-#define PLIC_INT_MAC1_QUEUE3 73
-#define PLIC_INT_MAC1_EMAC 74
-#define PLIC_INT_MAC1_MMSL 75
-#define PLIC_INT_DDRC_TRAIN 76
-#define PLIC_INT_SCB_INTERRUPT 77
-#define PLIC_INT_ECC_ERROR 78
-#define PLIC_INT_ECC_CORRECT 79
-#define PLIC_INT_RTC_WAKEUP 80
-#define PLIC_INT_RTC_MATCH 81
-#define PLIC_INT_TIMER1 82
-#define PLIC_INT_TIMER2 83
-#define PLIC_INT_ENVM 84
-#define PLIC_INT_QSPI 85
-#define PLIC_INT_USB_DMA 86
-#define PLIC_INT_USB_MC 87
-#define PLIC_INT_MMC_MAIN 88
-#define PLIC_INT_MMC_WAKEUP 89
-#define PLIC_INT_MMUART0 90
-#define PLIC_INT_MMUART1 91
-#define PLIC_INT_MMUART2 92
-#define PLIC_INT_MMUART3 93
-#define PLIC_INT_MMUART4 94
-#define PLIC_INT_G5C_DEVRST 95
-#define PLIC_INT_G5C_MESSAGE 96
-#define PLIC_INT_USOC_VC_INTERRUPT 97
-#define PLIC_INT_USOC_SMB_INTERRUPT 98
-#define PLIC_INT_E51_0_MAINTENACE 99
-#define PLIC_INT_WDOG0_MRVP 100
-#define PLIC_INT_WDOG1_MRVP 101
-#define PLIC_INT_WDOG2_MRVP 102
-#define PLIC_INT_WDOG3_MRVP 103
-#define PLIC_INT_WDOG4_MRVP 104
-#define PLIC_INT_WDOG0_TOUT 105
-#define PLIC_INT_WDOG1_TOUT 106
-#define PLIC_INT_WDOG2_TOUT 107
-#define PLIC_INT_WDOG3_TOUT 108
-#define PLIC_INT_WDOG4_TOUT 109
-#define PLIC_INT_G5C_MSS_SPI 110
-#define PLIC_INT_VOLT_TEMP_ALARM 111
-#define PLIC_INT_ATHENA_COMPLETE 112
-#define PLIC_INT_ATHENA_ALARM 113
-#define PLIC_INT_ATHENA_BUS_ERROR 114
-#define PLIC_INT_USOC_AXIC_US 115
-#define PLIC_INT_USOC_AXIC_DS 116
-#define PLIC_INT_SPARE 117
-#define PLIC_INT_FABRIC_F2H_0 118
-#define PLIC_INT_FABRIC_F2H_1 119
-#define PLIC_INT_FABRIC_F2H_2 120
-#define PLIC_INT_FABRIC_F2H_3 121
-#define PLIC_INT_FABRIC_F2H_4 122
-#define PLIC_INT_FABRIC_F2H_5 123
-#define PLIC_INT_FABRIC_F2H_6 124
-#define PLIC_INT_FABRIC_F2H_7 125
-#define PLIC_INT_FABRIC_F2H_8 126
-#define PLIC_INT_FABRIC_F2H_9 127
-#define PLIC_INT_FABRIC_F2H_10 128
-#define PLIC_INT_FABRIC_F2H_11 129
-#define PLIC_INT_FABRIC_F2H_12 130
-#define PLIC_INT_FABRIC_F2H_13 131
-#define PLIC_INT_FABRIC_F2H_14 132
-#define PLIC_INT_FABRIC_F2H_15 133
-#define PLIC_INT_FABRIC_F2H_16 134
-#define PLIC_INT_FABRIC_F2H_17 135
-#define PLIC_INT_FABRIC_F2H_18 136
-#define PLIC_INT_FABRIC_F2H_19 137
-#define PLIC_INT_FABRIC_F2H_20 138
-#define PLIC_INT_FABRIC_F2H_21 139
-#define PLIC_INT_FABRIC_F2H_22 140
-#define PLIC_INT_FABRIC_F2H_23 141
-#define PLIC_INT_FABRIC_F2H_24 142
-#define PLIC_INT_FABRIC_F2H_25 143
-#define PLIC_INT_FABRIC_F2H_26 144
-#define PLIC_INT_FABRIC_F2H_27 145
-#define PLIC_INT_FABRIC_F2H_28 146
-#define PLIC_INT_FABRIC_F2H_29 147
-#define PLIC_INT_FABRIC_F2H_30 148
-#define PLIC_INT_FABRIC_F2H_31 149
-#define PLIC_INT_FABRIC_F2H_32 150
-#define PLIC_INT_FABRIC_F2H_33 151
-#define PLIC_INT_FABRIC_F2H_34 152
-#define PLIC_INT_FABRIC_F2H_35 153
-#define PLIC_INT_FABRIC_F2H_36 154
-#define PLIC_INT_FABRIC_F2H_37 155
-#define PLIC_INT_FABRIC_F2H_38 156
-#define PLIC_INT_FABRIC_F2H_39 157
-#define PLIC_INT_FABRIC_F2H_40 158
-#define PLIC_INT_FABRIC_F2H_41 159
-#define PLIC_INT_FABRIC_F2H_42 160
-#define PLIC_INT_FABRIC_F2H_43 161
-#define PLIC_INT_FABRIC_F2H_44 162
-#define PLIC_INT_FABRIC_F2H_45 163
-#define PLIC_INT_FABRIC_F2H_46 164
-#define PLIC_INT_FABRIC_F2H_47 165
-#define PLIC_INT_FABRIC_F2H_48 166
-#define PLIC_INT_FABRIC_F2H_49 167
-#define PLIC_INT_FABRIC_F2H_50 168
-#define PLIC_INT_FABRIC_F2H_51 169
-#define PLIC_INT_FABRIC_F2H_52 170
-#define PLIC_INT_FABRIC_F2H_53 171
-#define PLIC_INT_FABRIC_F2H_54 172
-#define PLIC_INT_FABRIC_F2H_55 173
-#define PLIC_INT_FABRIC_F2H_56 174
-#define PLIC_INT_FABRIC_F2H_57 175
-#define PLIC_INT_FABRIC_F2H_58 176
-#define PLIC_INT_FABRIC_F2H_59 177
-#define PLIC_INT_FABRIC_F2H_60 178
-#define PLIC_INT_FABRIC_F2H_61 179
-#define PLIC_INT_FABRIC_F2H_62 180
-#define PLIC_INT_FABRIC_F2H_63 181
-#define PLIC_INT_BUS_ERROR_UNIT_HART_0 182
-#define PLIC_INT_BUS_ERROR_UNIT_HART_1 183
-#define PLIC_INT_BUS_ERROR_UNIT_HART_2 184
-#define PLIC_INT_BUS_ERROR_UNIT_HART_3 185
-#define PLIC_INT_BUS_ERROR_UNIT_HART_4 186
-
-#endif /* _DT_BINDINGS_INTERRUPT_CONTROLLER_MICROCHIP_MPFS_PLIC_H */
deleted file mode 100644
@@ -1,17 +0,0 @@
-/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
-/* Copyright (c) 2020-2021 Microchip Technology Inc */
-
-#ifndef _DT_BINDINGS_INTERRUPT_CONTROLLER_RISCV_HART_H
-#define _DT_BINDINGS_INTERRUPT_CONTROLLER_RISCV_HART_H
-
-#define HART_INT_U_SOFT 0
-#define HART_INT_S_SOFT 1
-#define HART_INT_M_SOFT 3
-#define HART_INT_U_TIMER 4
-#define HART_INT_S_TIMER 5
-#define HART_INT_M_TIMER 7
-#define HART_INT_U_EXT 8
-#define HART_INT_S_EXT 9
-#define HART_INT_M_EXT 11
-
-#endif /* _DT_BINDINGS_INTERRUPT_CONTROLLER_RISCV_HART_H */