@@ -6,7 +6,7 @@ CONFIG_NR_DRAM_BANKS=1
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80000000
CONFIG_SPL_DM_SPI=y
-CONFIG_DEFAULT_DEVICE_TREE="jh7110-starfive-visionfive-2-v1.3b"
+CONFIG_DEFAULT_DEVICE_TREE="jh7110-starfive-visionfive-2"
CONFIG_SPL_TEXT_BASE=0x8000000
CONFIG_SYS_PROMPT="StarFive #"
CONFIG_DM_RESET=y
@@ -21,15 +21,15 @@ CONFIG_SPL_OPENSBI_LOAD_ADDR=0x40000000
CONFIG_ARCH_RV64I=y
CONFIG_CMODEL_MEDANY=y
CONFIG_RISCV_SMODE=y
-CONFIG_DISTRO_DEFAULTS=y
CONFIG_FIT=y
+CONFIG_DISTRO_DEFAULTS=y
CONFIG_QSPI_BOOT=y
CONFIG_SD_BOOT=y
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS0,115200 debug rootwait earlycon=sbi"
CONFIG_USE_PREBOOT=y
CONFIG_PREBOOT="setenv fdt_addr ${fdtcontroladdr};fdt addr ${fdtcontroladdr};"
-CONFIG_DEFAULT_FDT_FILE="starfive/jh7110-starfive-visionfive-2-v1.3b.dtb"
+CONFIG_DEFAULT_FDT_FILE="starfive/jh7110-starfive-visionfive-2.dtb"
CONFIG_DISPLAY_CPUINFO=y
CONFIG_DISPLAY_BOARDINFO=y
CONFIG_SPL_MAX_SIZE=0x40000
@@ -52,6 +52,8 @@ CONFIG_SYS_BOOTM_LEN=0x4000000
CONFIG_CMD_MEMINFO=y
CONFIG_CMD_TFTPPUT=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_REGMAP=y
+CONFIG_SYSCON=y
CONFIG_SPL_CLK_COMPOSITE_CCF=y
CONFIG_CLK_COMPOSITE_CCF=y
CONFIG_SPL_CLK_JH7110=y
@@ -65,6 +67,13 @@ CONFIG_SPI_FLASH_EON=y
CONFIG_SPI_FLASH_GIGADEVICE=y
CONFIG_SPI_FLASH_ISSI=y
CONFIG_SPI_FLASH_MACRONIX=y
+CONFIG_PHY_MOTORCOMM=y
+CONFIG_DM_MDIO=y
+CONFIG_DM_ETH_PHY=y
+CONFIG_DWC_ETH_QOS=y
+CONFIG_DWC_ETH_QOS_STARFIVE=y
+CONFIG_RGMII=y
+CONFIG_RMII=y
CONFIG_PINCTRL=y
CONFIG_PINCONF=y
CONFIG_SPL_PINCTRL=y
Enable DWC_ETH_QOS and PHY_MOTORCOMM configuration to support ethernet function for StarFive VisionFive 2 board,including versions 1.2A and 1.3B. Signed-off-by: Yanhong Wang <yanhong.wang@starfivetech.com> --- configs/starfive_visionfive2_defconfig | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-)