| Message ID | 20230403081443.77933-5-n-jain1@ti.com |
|---|---|
| State | Superseded |
| Delegated to: | Anatolij Gustschin |
| Headers | show |
| Series | Add splash screen support at u-boot SPL | expand |
Hi Nikhil, On 03/04/23 13:44, Nikhil M Jain wrote: > To enable video driver at SPL, need to compile video-uclass, > vidconsole-uclass, backlight-uclass, panel-uclass, simple-panel, add > rules to compile them at SPL only. To support splash_display at SPL, > need to compile video-bmp, add rule to compile at SPL stage. > > Signed-off-by: Nikhil M Jain <n-jain1@ti.com> Reviewed-by: Devarsh Thakkar <devarsht@ti.com> Regards Devarsh > --- > V5: > - Use $(SPL_TPL_) to check for stage specific configs and compile at > specific stages. > - Removed ifdef CONFIG_SPL_BUILD > > V4: > - No change > > V3: > - Rule to compile backlight, console and panel files > - Not added Reiewed-by tag due to changes > > V2: > - No change > > drivers/video/Makefile | 12 ++++++------ > 1 file changed, 6 insertions(+), 6 deletions(-) > > diff --git a/drivers/video/Makefile b/drivers/video/Makefile > index cb3f373645..bb139f550c 100644 > --- a/drivers/video/Makefile > +++ b/drivers/video/Makefile > @@ -4,12 +4,12 @@ > # Wolfgang Denk, DENX Software Engineering, wd@denx.de. > > ifdef CONFIG_DM > -obj-$(CONFIG_BACKLIGHT) += backlight-uclass.o > +obj-$(CONFIG_$(SPL_TPL_)BACKLIGHT) += backlight-uclass.o > obj-$(CONFIG_BACKLIGHT_GPIO) += backlight_gpio.o > obj-$(CONFIG_BACKLIGHT_PWM) += pwm_backlight.o > -obj-$(CONFIG_CONSOLE_NORMAL) += console_normal.o > +obj-$(CONFIG_$(SPL_TPL)CONSOLE_NORMAL) += console_normal.o > obj-$(CONFIG_CONSOLE_ROTATION) += console_rotate.o > -ifdef CONFIG_CONSOLE_NORMAL > +ifdef CONFIG_$(SPL_TPL_)CONSOLE_NORMAL > obj-y += console_core.o > else ifdef CONFIG_CONSOLE_ROTATION > obj-y += console_core.o > @@ -18,9 +18,9 @@ obj-$(CONFIG_CONSOLE_ROTATION) += console_core.o > obj-$(CONFIG_CONSOLE_TRUETYPE) += console_truetype.o fonts/ > obj-$(CONFIG_DISPLAY) += display-uclass.o > obj-$(CONFIG_VIDEO_MIPI_DSI) += dsi-host-uclass.o > -obj-$(CONFIG_VIDEO) += video-uclass.o vidconsole-uclass.o > -obj-$(CONFIG_VIDEO) += video_bmp.o > -obj-$(CONFIG_PANEL) += panel-uclass.o > +obj-$(CONFIG_$(SPL_TPL_)VIDEO) += video-uclass.o vidconsole-uclass.o > +obj-$(CONFIG_$(SPL_TPL_)VIDEO) += video_bmp.o > +obj-$(CONFIG_$(SPL_TPL_)PANEL) += panel-uclass.o > obj-$(CONFIG_PANEL_HX8238D) += hx8238d.o > obj-$(CONFIG_SIMPLE_PANEL) += simple_panel.o >
diff --git a/drivers/video/Makefile b/drivers/video/Makefile index cb3f373645..bb139f550c 100644 --- a/drivers/video/Makefile +++ b/drivers/video/Makefile @@ -4,12 +4,12 @@ # Wolfgang Denk, DENX Software Engineering, wd@denx.de. ifdef CONFIG_DM -obj-$(CONFIG_BACKLIGHT) += backlight-uclass.o +obj-$(CONFIG_$(SPL_TPL_)BACKLIGHT) += backlight-uclass.o obj-$(CONFIG_BACKLIGHT_GPIO) += backlight_gpio.o obj-$(CONFIG_BACKLIGHT_PWM) += pwm_backlight.o -obj-$(CONFIG_CONSOLE_NORMAL) += console_normal.o +obj-$(CONFIG_$(SPL_TPL)CONSOLE_NORMAL) += console_normal.o obj-$(CONFIG_CONSOLE_ROTATION) += console_rotate.o -ifdef CONFIG_CONSOLE_NORMAL +ifdef CONFIG_$(SPL_TPL_)CONSOLE_NORMAL obj-y += console_core.o else ifdef CONFIG_CONSOLE_ROTATION obj-y += console_core.o @@ -18,9 +18,9 @@ obj-$(CONFIG_CONSOLE_ROTATION) += console_core.o obj-$(CONFIG_CONSOLE_TRUETYPE) += console_truetype.o fonts/ obj-$(CONFIG_DISPLAY) += display-uclass.o obj-$(CONFIG_VIDEO_MIPI_DSI) += dsi-host-uclass.o -obj-$(CONFIG_VIDEO) += video-uclass.o vidconsole-uclass.o -obj-$(CONFIG_VIDEO) += video_bmp.o -obj-$(CONFIG_PANEL) += panel-uclass.o +obj-$(CONFIG_$(SPL_TPL_)VIDEO) += video-uclass.o vidconsole-uclass.o +obj-$(CONFIG_$(SPL_TPL_)VIDEO) += video_bmp.o +obj-$(CONFIG_$(SPL_TPL_)PANEL) += panel-uclass.o obj-$(CONFIG_PANEL_HX8238D) += hx8238d.o obj-$(CONFIG_SIMPLE_PANEL) += simple_panel.o
To enable video driver at SPL, need to compile video-uclass, vidconsole-uclass, backlight-uclass, panel-uclass, simple-panel, add rules to compile them at SPL only. To support splash_display at SPL, need to compile video-bmp, add rule to compile at SPL stage. Signed-off-by: Nikhil M Jain <n-jain1@ti.com> --- V5: - Use $(SPL_TPL_) to check for stage specific configs and compile at specific stages. - Removed ifdef CONFIG_SPL_BUILD V4: - No change V3: - Rule to compile backlight, console and panel files - Not added Reiewed-by tag due to changes V2: - No change drivers/video/Makefile | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)