diff mbox series

[1/4] arm64: dts: imx8mp: Adjust FEC PHY address on i.MX8MP DHCOM

Message ID 20230211220948.480569-1-marex@denx.de
State Superseded
Delegated to: Stefano Babic
Headers show
Series [1/4] arm64: dts: imx8mp: Adjust FEC PHY address on i.MX8MP DHCOM | expand

Commit Message

Marek Vasut Feb. 11, 2023, 10:09 p.m. UTC 
The current variant of the SoM has LAN8740Ai PHY connected to FEC
strapped to MDIO address 0 , adjust the MDIO address to match the
hardware.

Signed-off-by: Marek Vasut <marex@denx.de>
---
Cc: "NXP i.MX U-Boot Team" <uboot-imx@nxp.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: u-boot@lists.denx.de
---
 arch/arm/dts/imx8mp-dhcom-som.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/dts/imx8mp-dhcom-som.dtsi b/arch/arm/dts/imx8mp-dhcom-som.dtsi
index 0f13ee36277..304c94557ed 100644
--- a/arch/arm/dts/imx8mp-dhcom-som.dtsi
+++ b/arch/arm/dts/imx8mp-dhcom-som.dtsi
@@ -94,14 +94,14 @@ 
 		#size-cells = <0>;
 
 		/* Up to one of these two PHYs may be populated. */
-		ethphy0f: ethernet-phy@1 { /* SMSC LAN8740Ai */
+		ethphy0f: ethernet-phy@0 { /* SMSC LAN8740Ai */
 			compatible = "ethernet-phy-id0007.c110",
 				     "ethernet-phy-ieee802.3-c22";
 			interrupt-parent = <&gpio3>;
 			interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
 			pinctrl-0 = <&pinctrl_ethphy0>;
 			pinctrl-names = "default";
-			reg = <1>;
+			reg = <0>;
 			reset-assert-us = <1000>;
 			reset-deassert-us = <1000>;
 			reset-gpios = <&gpio3 20 GPIO_ACTIVE_LOW>;