diff mbox series

usb: dwc3: Look up reference clock DT phandle in both controller DT nodes

Message ID 20221215223822.137739-1-marex@denx.de
State Deferred
Delegated to: Tom Rini
Headers show
Series usb: dwc3: Look up reference clock DT phandle in both controller DT nodes | expand

Commit Message

Marek Vasut Dec. 15, 2022, 10:38 p.m. UTC 
There are currently four disparate placement possibilities of DWC3
reference clock phandle in SoC DTs:
- in top level glue node, with generic subnode without clock (ZynqMP)
- in top level generic node, with no subnode (i.MX8MQ)
- in generic subnode, with other clock in top level node (i.MX8MP)
- in both top level node and generic subnode (Rockchip)

Cover all the possibilities here by looking into both nodes, start
with the top level node as that seems to be used in majority of DTs
to reference the clock.

Signed-off-by: Marek Vasut <marex@denx.de>
---
Cc: Angus Ainslie <angus@akkea.ca>
Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
---
 drivers/usb/dwc3/dwc3-generic.c | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)
diff mbox series

Patch

diff --git a/drivers/usb/dwc3/dwc3-generic.c b/drivers/usb/dwc3/dwc3-generic.c
index 78966718d01..42e92478f25 100644
--- a/drivers/usb/dwc3/dwc3-generic.c
+++ b/drivers/usb/dwc3/dwc3-generic.c
@@ -68,10 +68,27 @@  static int dwc3_generic_probe(struct udevice *dev,
 #if CONFIG_IS_ENABLED(OF_CONTROL)
 	dwc3_of_parse(dwc3);
 
+	/*
+	 * There are currently four disparate placement possibilities of DWC3
+	 * reference clock phandle in SoC DTs:
+	 * - in top level glue node, with generic subnode without clock (ZynqMP)
+	 * - in top level generic node, with no subnode (i.MX8MQ)
+	 * - in generic subnode, with other clock in top level node (i.MX8MP)
+	 * - in both top level node and generic subnode (Rockchip)
+	 * Cover all the possibilities here by looking into both nodes, start
+	 * with the top level node as that seems to be used in majority of DTs
+	 * to reference the clock.
+	 */
 	node = dev_ofnode(dev->parent);
 	index = ofnode_stringlist_search(node, "clock-names", "ref");
 	if (index < 0)
 		index = ofnode_stringlist_search(node, "clock-names", "ref_clk");
+	if (index < 0) {
+		node = dev_ofnode(dev);
+		index = ofnode_stringlist_search(node, "clock-names", "ref");
+		if (index < 0)
+			index = ofnode_stringlist_search(node, "clock-names", "ref_clk");
+	}
 	if (index >= 0)
 		dwc3->ref_clk = &glue->clks.clks[index];
 #endif