diff mbox series

[v3,18/19] configs: at91: sama7: Enable USB and RESET functionality

Message ID 20221212133949.226246-19-sergiu.moga@microchip.com
State Superseded
Delegated to: Eugen Hristev
Headers show
Series Add USB on SAM9X60, SAMA7G5 and SAMA5D2 boards | expand

Commit Message

Sergiu Moga Dec. 12, 2022, 1:39 p.m. UTC 
Enable USB and RESET functionality. In order for USB to
work properly on SAMA7, the driver needs to be able
to have access to PHY's, which, in turn, need to have
access to the RSTC driver's assert/deassert functionalities.

Signed-off-by: Sergiu Moga <sergiu.moga@microchip.com>
Tested-by: Mihai Sain <mihai.sain@microchip.com>
---



v1 -> v3:
- No change




 configs/sama7g5ek_mmc1_defconfig | 10 ++++++++++
 configs/sama7g5ek_mmc_defconfig  | 10 ++++++++++
 2 files changed, 20 insertions(+)
diff mbox series

Patch

diff --git a/configs/sama7g5ek_mmc1_defconfig b/configs/sama7g5ek_mmc1_defconfig
index f004e44803..6c92781e60 100644
--- a/configs/sama7g5ek_mmc1_defconfig
+++ b/configs/sama7g5ek_mmc1_defconfig
@@ -38,6 +38,7 @@  CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 # CONFIG_CMD_LOADS is not set
 CONFIG_CMD_MMC=y
+CONFIG_CMD_USB=y
 CONFIG_CMD_DHCP=y
 CONFIG_CMD_MII=y
 CONFIG_CMD_PING=y
@@ -68,8 +69,12 @@  CONFIG_MMC_SDHCI_ATMEL=y
 CONFIG_PHY_MICREL=y
 CONFIG_PHY_MICREL_KSZ90X1=y
 CONFIG_MACB=y
+CONFIG_PHY=y
+CONFIG_PHY_MICROCHIP_SAMA7_USB=y
 CONFIG_PINCTRL=y
 CONFIG_PINCTRL_AT91PIO4=y
+CONFIG_DM_RESET=y
+CONFIG_RESET_AT91=y
 CONFIG_DM_SERIAL=y
 CONFIG_DEBUG_UART_ANNOUNCE=y
 CONFIG_ATMEL_USART=y
@@ -77,5 +82,10 @@  CONFIG_SYSRESET=y
 CONFIG_SYSRESET_AT91=y
 CONFIG_TIMER=y
 CONFIG_MCHP_PIT64B_TIMER=y
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_ATMEL=y
+CONFIG_USB_STORAGE=y
 CONFIG_OF_LIBFDT_OVERLAY=y
 # CONFIG_EFI_LOADER_HII is not set
diff --git a/configs/sama7g5ek_mmc_defconfig b/configs/sama7g5ek_mmc_defconfig
index 5b42fc63f3..a4e57c7ba5 100644
--- a/configs/sama7g5ek_mmc_defconfig
+++ b/configs/sama7g5ek_mmc_defconfig
@@ -38,6 +38,7 @@  CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 # CONFIG_CMD_LOADS is not set
 CONFIG_CMD_MMC=y
+CONFIG_CMD_USB=y
 CONFIG_CMD_DHCP=y
 CONFIG_CMD_MII=y
 CONFIG_CMD_PING=y
@@ -68,8 +69,12 @@  CONFIG_MMC_SDHCI_ATMEL=y
 CONFIG_PHY_MICREL=y
 CONFIG_PHY_MICREL_KSZ90X1=y
 CONFIG_MACB=y
+CONFIG_PHY=y
+CONFIG_PHY_MICROCHIP_SAMA7_USB=y
 CONFIG_PINCTRL=y
 CONFIG_PINCTRL_AT91PIO4=y
+CONFIG_DM_RESET=y
+CONFIG_RESET_AT91=y
 CONFIG_DM_SERIAL=y
 CONFIG_DEBUG_UART_ANNOUNCE=y
 CONFIG_ATMEL_USART=y
@@ -77,5 +82,10 @@  CONFIG_SYSRESET=y
 CONFIG_SYSRESET_AT91=y
 CONFIG_TIMER=y
 CONFIG_MCHP_PIT64B_TIMER=y
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_ATMEL=y
+CONFIG_USB_STORAGE=y
 CONFIG_OF_LIBFDT_OVERLAY=y
 # CONFIG_EFI_LOADER_HII is not set