diff mbox series

[5/7] mtd: mxs_nand: don't get the gpmi_apbh_dma clock

Message ID 20220928084509.2758974-6-dario.binacchi@amarulasolutions.com
State Accepted
Delegated to: Dario Binacchi
Headers show
Series Support NAND ONFI EDO mode for imx8mn architecture | expand

Commit Message

Dario Binacchi Sept. 28, 2022, 8:45 a.m. UTC 
This clock name is not present in any U-boot and Linux kernel device
tree.

Fixes: commit a59691280daca ("MXS_NAND: Add clock support for iMX8")
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
---

 drivers/mtd/nand/raw/mxs_nand_dt.c | 13 -------------
 1 file changed, 13 deletions(-)
diff mbox series

Patch

diff --git a/drivers/mtd/nand/raw/mxs_nand_dt.c b/drivers/mtd/nand/raw/mxs_nand_dt.c
index b9833a646f01..c1e784832f33 100644
--- a/drivers/mtd/nand/raw/mxs_nand_dt.c
+++ b/drivers/mtd/nand/raw/mxs_nand_dt.c
@@ -143,19 +143,6 @@  static int mxs_nand_dt_probe(struct udevice *dev)
 			debug("Can't enable gpmi_apb_bch clk: %d\n", ret);
 			return ret;
 		}
-
-		/* this clock is used for apbh_dma, since the apbh dma does not support DM,
-		  * we optionally enable it here
-		  */
-		ret = clk_get_by_name(dev, "gpmi_apbh_dma", &gpmi_clk);
-		if (ret < 0) {
-			debug("Can't get gpmi_apbh_dma clk: %d\n", ret);
-		} else {
-			ret = clk_enable(&gpmi_clk);
-			if (ret < 0) {
-				debug("Can't enable gpmi_apbh_dma clk: %d\n", ret);
-			}
-		}
 	}
 
 	return mxs_nand_init_ctrl(info);