diff mbox series

[02/17] net: ipv6: Add IPv6 build options

Message ID 20220906150955.505100-3-v.v.mitrofanov@yadro.com
State Superseded
Delegated to: Ramon Fried
Headers show
Series IPv6 support | expand

Commit Message

Vyacheslav V. Mitrofanov Sept. 6, 2022, 3:09 p.m. UTC 
Add options to Makefile and Kconfig file to build IPv6

Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com>
---
 net/Kconfig  | 10 ++++++++++
 net/Makefile |  1 +
 2 files changed, 11 insertions(+)

Comments

Simon Glass Sept. 7, 2022, 9:10 p.m. UTC | #1 
On Tue, 6 Sept 2022 at 09:10, Viacheslav Mitrofanov
<v.v.mitrofanov@yadro.com> wrote:
>
> Add options to Makefile and Kconfig file to build IPv6
>
> Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com>
> ---
>  net/Kconfig  | 10 ++++++++++
>  net/Makefile |  1 +
>  2 files changed, 11 insertions(+)
>

Reviewed-by: Simon Glass <sjg@chromium.org>
diff mbox series

Patch

diff --git a/net/Kconfig b/net/Kconfig
index 52e261884d..24a3cfa5f4 100644
--- a/net/Kconfig
+++ b/net/Kconfig
@@ -174,6 +174,16 @@  config BOOTP_MAX_ROOT_PATH_LEN
 	help
 	  Select maximal length of option 17 root path.
 
+config IPV6
+	bool "IPv6 support"
+	help
+	  Enable IPv6 support. It includes Neighbour Discovery protocol, ICMPv6
+	  and auxiliary stuff to make it work. Since it is enabled u-boot
+	  network subsystem can get and handle incoming packets and send packets
+	  through IPv6 network. It allows to use environment variables such as
+	  ip6addr, serverip6. If a u-boot command is capable to parse an IPv6
+	  address and find it, it will force using IPv6 in the network stack.
+
 endif   # if NET
 
 config SYS_RX_ETH_BUFFER
diff --git a/net/Makefile b/net/Makefile
index 6c812502d3..4ea2a14f27 100644
--- a/net/Makefile
+++ b/net/Makefile
@@ -21,6 +21,7 @@  obj-$(CONFIG_DM_MDIO_MUX) += mdio-mux-uclass.o
 obj-$(CONFIG_NET)      += eth_common.o
 obj-$(CONFIG_CMD_LINK_LOCAL) += link_local.o
 obj-$(CONFIG_NET)      += net.o
+obj-$(CONFIG_IPV6)     += net6.o
 obj-$(CONFIG_CMD_NFS)  += nfs.o
 obj-$(CONFIG_CMD_PING) += ping.o
 obj-$(CONFIG_CMD_PCAP) += pcap.o