@@ -31,7 +31,7 @@
};
&i2c1 {
- pmic: pca9450@25 {
+ pmic: pmic@25 {
compatible = "nxp,pca9450b";
reg = <0x25>;
pinctrl-names = "default";
@@ -41,18 +41,18 @@
regulators {
buck1: BUCK1{
- regulator-name = "BUCK1";
- regulator-min-microvolt = <600000>;
- regulator-max-microvolt = <2187500>;
+ regulator-name = "VDD_SOC";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <950000>;
regulator-boot-on;
regulator-always-on;
regulator-ramp-delay = <3125>;
};
buck2: BUCK2 {
- regulator-name = "BUCK2";
- regulator-min-microvolt = <600000>;
- regulator-max-microvolt = <2187500>;
+ regulator-name = "VDD_ARM_0V9";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1000000>;
regulator-boot-on;
regulator-always-on;
regulator-ramp-delay = <3125>;
@@ -61,63 +61,63 @@
};
buck4: BUCK4{
- regulator-name = "BUCK4";
- regulator-min-microvolt = <600000>;
- regulator-max-microvolt = <3400000>;
+ regulator-name = "VDD_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
buck5: BUCK5{
- regulator-name = "BUCK5";
- regulator-min-microvolt = <600000>;
- regulator-max-microvolt = <3400000>;
+ regulator-name = "VDD_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
buck6: BUCK6 {
- regulator-name = "BUCK6";
- regulator-min-microvolt = <600000>;
- regulator-max-microvolt = <3400000>;
+ regulator-name = "NVCC_DRAM_1V1";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
regulator-boot-on;
regulator-always-on;
};
ldo1: LDO1 {
- regulator-name = "LDO1";
- regulator-min-microvolt = <1600000>;
- regulator-max-microvolt = <3300000>;
+ regulator-name = "NVCC_SNVS_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
ldo2: LDO2 {
- regulator-name = "LDO2";
+ regulator-name = "VDD_SNVS_0V8";
regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1150000>;
+ regulator-max-microvolt = <800000>;
regulator-boot-on;
regulator-always-on;
};
ldo3: LDO3 {
- regulator-name = "LDO3";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <3300000>;
+ regulator-name = "VDDA_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
ldo4: LDO4 {
- regulator-name = "LDO4";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <3300000>;
+ regulator-name = "VDD_PHY_1V2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
regulator-boot-on;
regulator-always-on;
};
ldo5: LDO5 {
- regulator-name = "LDO5";
+ regulator-name = "NVCC_SD2";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
@@ -69,9 +69,9 @@ int power_init_board(void)
struct udevice *dev;
int ret;
- ret = pmic_get("pca9450@25", &dev);
+ ret = pmic_get("pmic@25", &dev);
if (ret == -ENODEV) {
- puts("No pca9450@25\n");
+ puts("No pmci@25\n");
return 0;
}
if (ret != 0)
Sync dts for imx8mn-evk with Linux Kernel and change name for PMIC used in spl. This was synced with linux 5.19-rc3 and contains the following changes: commit 1cfa1e68af8d40ab233d5d27bc8446e4c5107571("arm64: dts: imx8mn-evk: fix the min/max voltages of the PMIC") commit bc046b952a5494b0dc53be28779460cee1214a3f("arm64: dts: imx8mn-evk: use proper names for PMIC outputs") Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com> --- v2: - stated the kernel version the sync was done from (thanks Fabio) - update the patch subject to clarify that changes the evk dts (thanks Tim) arch/arm/dts/imx8mn-evk.dts | 56 ++++++++++++++++---------------- board/freescale/imx8mn_evk/spl.c | 4 +-- 2 files changed, 30 insertions(+), 30 deletions(-)