@@ -21,19 +21,23 @@
#define UBOOT_DM_CLK_IMX_PLLV3_USB "imx_clk_pllv3_usb"
#define UBOOT_DM_CLK_IMX_PLLV3_AV "imx_clk_pllv3_av"
#define UBOOT_DM_CLK_IMX_PLLV3_ENET "imx_clk_pllv3_enet"
+#define UBOOT_DM_CLK_IMX_PLLV3_GENV2 "imx_clk_pllv3_genericv2"
#define PLL_NUM_OFFSET 0x10
#define PLL_DENOM_OFFSET 0x20
#define BM_PLL_POWER (0x1 << 12)
+#define BM_PLL_POWER_V2 (0x1 << 21)
#define BM_PLL_ENABLE (0x1 << 13)
#define BM_PLL_LOCK (0x1 << 31)
+#define BM_PLL_LOCK_V2 (0x1 << 29)
struct clk_pllv3 {
struct clk clk;
void __iomem *base;
u32 power_bit;
bool powerup_set;
+ u32 lock_bit;
u32 enable_bit;
u32 div_mask;
u32 div_shift;
@@ -42,6 +46,30 @@ struct clk_pllv3 {
#define to_clk_pllv3(_clk) container_of(_clk, struct clk_pllv3, clk)
+static ulong clk_pllv3_genericv2_get_rate(struct clk *clk)
+{
+ struct clk_pllv3 *pll = to_clk_pllv3(dev_get_clk_ptr(clk->dev));
+ unsigned long parent_rate = clk_get_parent_rate(clk);
+
+ u32 div = (readl(pll->base) >> pll->div_shift) & pll->div_mask;
+
+ return (div == 0) ? parent_rate * 22 : parent_rate * 20;
+}
+
+static ulong clk_pllv3_genericv2_set_rate(struct clk *clk, ulong rate)
+{
+ struct clk_pllv3 *pll = to_clk_pllv3(clk);
+ unsigned long parent_rate = clk_get_parent_rate(clk);
+
+ u32 div = (readl(pll->base) >> pll->div_shift) & pll->div_mask;
+ u32 val = (div == 0) ? parent_rate * 22 : parent_rate * 20;
+
+ if (rate == val)
+ return 0;
+
+ return -EINVAL;
+}
+
static ulong clk_pllv3_generic_get_rate(struct clk *clk)
{
struct clk_pllv3 *pll = to_clk_pllv3(dev_get_clk_ptr(clk->dev));
@@ -71,7 +99,7 @@ static ulong clk_pllv3_generic_set_rate(struct clk *clk, ulong rate)
writel(val, pll->base);
/* Wait for PLL to lock */
- while (!(readl(pll->base) & BM_PLL_LOCK))
+ while (!(readl(pll->base) & pll->lock_bit))
;
return 0;
@@ -120,6 +148,13 @@ static const struct clk_ops clk_pllv3_generic_ops = {
.set_rate = clk_pllv3_generic_set_rate,
};
+static const struct clk_ops clk_pllv3_genericv2_ops = {
+ .get_rate = clk_pllv3_genericv2_get_rate,
+ .enable = clk_pllv3_generic_enable,
+ .disable = clk_pllv3_generic_disable,
+ .set_rate = clk_pllv3_genericv2_set_rate,
+};
+
static ulong clk_pllv3_sys_get_rate(struct clk *clk)
{
struct clk_pllv3 *pll = to_clk_pllv3(clk);
@@ -153,7 +188,7 @@ static ulong clk_pllv3_sys_set_rate(struct clk *clk, ulong rate)
writel(val, pll->base);
/* Wait for PLL to lock */
- while (!(readl(pll->base) & BM_PLL_LOCK))
+ while (!(readl(pll->base) & pll->lock_bit))
;
return 0;
@@ -221,7 +256,7 @@ static ulong clk_pllv3_av_set_rate(struct clk *clk, ulong rate)
writel(mfd, pll->base + PLL_DENOM_OFFSET);
/* Wait for PLL to lock */
- while (!(readl(pll->base) & BM_PLL_LOCK))
+ while (!(readl(pll->base) & pll->lock_bit))
;
return 0;
@@ -262,6 +297,7 @@ struct clk *imx_clk_pllv3(enum imx_pllv3_type type, const char *name,
pll->power_bit = BM_PLL_POWER;
pll->enable_bit = BM_PLL_ENABLE;
+ pll->lock_bit = BM_PLL_LOCK;
switch (type) {
case IMX_PLLV3_GENERIC:
@@ -269,6 +305,13 @@ struct clk *imx_clk_pllv3(enum imx_pllv3_type type, const char *name,
pll->div_shift = 0;
pll->powerup_set = false;
break;
+ case IMX_PLLV3_GENERICV2:
+ pll->power_bit = BM_PLL_POWER_V2;
+ pll->lock_bit = BM_PLL_LOCK_V2;
+ drv_name = UBOOT_DM_CLK_IMX_PLLV3_GENV2;
+ pll->div_shift = 0;
+ pll->powerup_set = false;
+ break;
case IMX_PLLV3_SYS:
drv_name = UBOOT_DM_CLK_IMX_PLLV3_SYS;
pll->div_shift = 0;
@@ -313,6 +356,13 @@ U_BOOT_DRIVER(clk_pllv3_generic) = {
.flags = DM_FLAG_PRE_RELOC,
};
+U_BOOT_DRIVER(clk_pllv3_genericv2) = {
+ .name = UBOOT_DM_CLK_IMX_PLLV3_GENV2,
+ .id = UCLASS_CLK,
+ .ops = &clk_pllv3_genericv2_ops,
+ .flags = DM_FLAG_PRE_RELOC,
+};
+
U_BOOT_DRIVER(clk_pllv3_sys) = {
.name = UBOOT_DM_CLK_IMX_PLLV3_SYS,
.id = UCLASS_CLK,
@@ -10,6 +10,7 @@
enum imx_pllv3_type {
IMX_PLLV3_GENERIC,
+ IMX_PLLV3_GENERICV2,
IMX_PLLV3_SYS,
IMX_PLLV3_USB,
IMX_PLLV3_USB_VF610,
The i.MXRT11 series has two new pll types but are variants of existing. This patch adds the ability to read one of the pll types' frequency as it can't be changed unlike the generic pll it also has the division factors swapped. Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com> --- V1 -> V2: * Change BM_PLL_POWER and BM_PLL_LOCK bit to variable * Use different lock and power bit for new pll --- drivers/clk/imx/clk-pllv3.c | 56 +++++++++++++++++++++++++++++++++++-- drivers/clk/imx/clk.h | 1 + 2 files changed, 54 insertions(+), 3 deletions(-)