diff mbox series

[1/2] mx6slevk: Remove duplicated "mmc dev" command

Message ID 20220422171757.1719093-1-festevam@gmail.com
State Accepted
Commit 3df5f198363a62d94b868d3b0cb1b728af748fb3
Delegated to: Stefano Babic
Headers show
Series [1/2] mx6slevk: Remove duplicated "mmc dev" command | expand

Commit Message

Fabio Estevam April 22, 2022, 5:17 p.m. UTC 
From: Fabio Estevam <festevam@denx.de>

The "mmc dev ${mmcdev}" command is done twice.

Remove one ocurrence to avoid the duplication.

Signed-off-by: Fabio Estevam <festevam@denx.de>
---
 configs/mx6slevk_defconfig        | 2 +-
 configs/mx6slevk_spinor_defconfig | 2 +-
 configs/mx6slevk_spl_defconfig    | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

Comments

Stefano Babic May 20, 2022, 1:42 p.m. UTC | #1 
> From: Fabio Estevam <festevam@denx.de>
> The "mmc dev ${mmcdev}" command is done twice.
> Remove one ocurrence to avoid the duplication.
> Signed-off-by: Fabio Estevam <festevam@denx.de>
Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic
diff mbox series

Patch

diff --git a/configs/mx6slevk_defconfig b/configs/mx6slevk_defconfig
index 12789c934c0f..79057f7f4c14 100644
--- a/configs/mx6slevk_defconfig
+++ b/configs/mx6slevk_defconfig
@@ -12,7 +12,7 @@  CONFIG_DEFAULT_DEVICE_TREE="imx6sl-evk"
 # CONFIG_CMD_BMODE is not set
 CONFIG_SUPPORT_RAW_INITRD=y
 CONFIG_USE_BOOTCOMMAND=y
-CONFIG_BOOTCOMMAND="mmc dev ${mmcdev};mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; else run netboot; fi"
+CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; else run netboot; fi"
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_BOOTZ=y
diff --git a/configs/mx6slevk_spinor_defconfig b/configs/mx6slevk_spinor_defconfig
index 2bfeac35877d..2f9026287fc6 100644
--- a/configs/mx6slevk_spinor_defconfig
+++ b/configs/mx6slevk_spinor_defconfig
@@ -14,7 +14,7 @@  CONFIG_DEFAULT_DEVICE_TREE="imx6sl-evk"
 CONFIG_SUPPORT_RAW_INITRD=y
 CONFIG_SPI_BOOT=y
 CONFIG_USE_BOOTCOMMAND=y
-CONFIG_BOOTCOMMAND="mmc dev ${mmcdev};mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; else run netboot; fi"
+CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; else run netboot; fi"
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_BOOTZ=y
diff --git a/configs/mx6slevk_spl_defconfig b/configs/mx6slevk_spl_defconfig
index 09d71ae905f7..5a43a5501cea 100644
--- a/configs/mx6slevk_spl_defconfig
+++ b/configs/mx6slevk_spl_defconfig
@@ -23,7 +23,7 @@  CONFIG_SPL_LIBDISK_SUPPORT=y
 # CONFIG_CMD_BMODE is not set
 CONFIG_SUPPORT_RAW_INITRD=y
 CONFIG_USE_BOOTCOMMAND=y
-CONFIG_BOOTCOMMAND="mmc dev ${mmcdev};mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; else run netboot; fi"
+CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; else run netboot; fi"
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_SPL_FS_EXT4=y
 CONFIG_SPL_I2C=y