@@ -18,7 +18,7 @@
};
};
- clk48m: clk48m@0 {
+ clk48m: oscillator {
compatible = "fixed-clock";
clock-frequency = <48000000>;
@@ -26,32 +26,32 @@
#clock-cells = <0>;
};
- sysc: sysc@10000000 {
+ sysc: syscon@10000000 {
compatible = "mediatek,mt7620-sysc";
reg = <0x10000000 0x100>;
};
- clkctrl: clkctrl@10000030 {
+ clkctrl: clock-controller@10000030 {
compatible = "mediatek,mt7620-clk";
mediatek,sysc = <&sysc>;
#clock-cells = <1>;
};
- rstctrl: rstctrl@10000034 {
+ rstctrl: reset-controller@10000034 {
compatible = "mediatek,mtmips-reset";
reg = <0x10000034 0x4>;
#reset-cells = <1>;
};
- reboot: resetctl-reboot {
+ reboot: reset-controller {
compatible = "resetctl-reboot";
resets = <&rstctrl SYS_RST>;
reset-names = "sysreset";
};
- uartfull: uartfull@10000500 {
+ uartfull: serial@10000500 {
compatible = "mediatek,mt7620-uart";
reg = <10000500 0x100>;
@@ -68,7 +68,7 @@
status = "disabled";
};
- uartlite: uartlite@10000c00 {
+ uartlite: serial@10000c00 {
compatible = "mediatek,mt7620-uart";
reg = <0x10000c00 0x100>;
@@ -158,7 +158,7 @@
reset-names = "wdt";
};
- gpio0: gpio0@10000600 {
+ gpio0: gpio@10000600 {
compatible = "mediatek,mt7620-gpio";
reg = <0x10000600 0x34>;
@@ -173,7 +173,7 @@
#gpio-cells = <2>;
};
- gpio1: gpio1@10000638 {
+ gpio1: gpio@10000638 {
compatible = "mediatek,mt7620-gpio";
reg = <0x10000638 0x24>;
@@ -188,7 +188,7 @@
#gpio-cells = <2>;
};
- gpio2: gpio2@10000660 {
+ gpio2: gpio@10000660 {
compatible = "mediatek,mt7620-gpio";
reg = <0x10000660 0x24>;
@@ -203,7 +203,7 @@
#gpio-cells = <2>;
};
- gpio3: gpio3@10000688 {
+ gpio3: gpio@10000688 {
compatible = "mediatek,mt7620-gpio";
reg = <0x10000688 0x24>;
@@ -234,7 +234,7 @@
clocks = <&clkctrl CLK_SPI>;
};
- eth: eth@10100000 {
+ eth: ethernet@10100000 {
compatible = "mediatek,mt7620-eth";
reg = <0x10100000 0x10000
0x10110000 0x8000>;
@@ -255,7 +255,7 @@
status = "disabled";
};
- usb_phy: mt7620-usb-phy {
+ usb_phy: usb-phy {
compatible = "mediatek,mt7620-usbphy";
#phy-cells = <0>;
@@ -269,7 +269,7 @@
reset-names = "uhst", "udev";
};
- ehci@101c0000 {
+ ehci: usb@101c0000 {
compatible = "generic-ehci";
reg = <0x101c0000 0x1000>;
The name of a node should be somewhat generic, reflecting the function of the device and not its precise programming model. - oscillator - syscon - clock-controller - reset-controller - serial - gpio - ethernet - usb-phy - usb [1] devicetree-specification-v0.3.pdf https://github.com/devicetree-org/devicetree-specification/releases/tag/v0.3 Signed-off-by: Du Huanpeng <dhu@hodcarrier.org> --- arch/mips/dts/mt7620.dtsi | 28 ++++++++++++++-------------- 1 file changed, 14 insertions(+), 14 deletions(-)