@@ -225,8 +225,6 @@
#define CONFIG_SYS_FEC1_IOBASE (MMAP_FEC1)
#define CONFIG_SYS_UART_BASE (MMAP_UART0 + (CONFIG_SYS_UART_PORT * 0x4000))
-#define CONFIG_SYS_MCFRTC_BASE (MMAP_RTC)
-
/* Timer */
#ifdef CONFIG_MCFTMR
#define CONFIG_SYS_UDELAY_BASE (MMAP_DTMR0)
@@ -249,7 +247,6 @@
#define CONFIG_SYS_FEC0_IOBASE (MMAP_FEC)
#define CONFIG_SYS_UART_BASE (MMAP_UART0 + (CONFIG_SYS_UART_PORT * 0x4000))
-#define CONFIG_SYS_MCFRTC_BASE (MMAP_RTC)
/* Timer */
#ifdef CONFIG_MCFTMR
@@ -283,7 +280,6 @@
#endif
#define MMAP_DSPI MMAP_DSPI0
-#define CONFIG_SYS_MCFRTC_BASE (MMAP_RTC)
/* Timer */
#ifdef CONFIG_MCFTMR
@@ -39,4 +39,6 @@ CONFIG_SYS_FLASH_CFI=y
CONFIG_DM_ETH=y
CONFIG_MCFFEC=y
CONFIG_MII=y
+CONFIG_MCFRTC=y
+CONFIG_SYS_MCFRTC_BASE=0xFC0A8000
CONFIG_MCFUART=y
@@ -41,4 +41,6 @@ CONFIG_MTD_RAW_NAND=y
CONFIG_DM_ETH=y
CONFIG_MCFFEC=y
CONFIG_MII=y
+CONFIG_MCFRTC=y
+CONFIG_SYS_MCFRTC_BASE=0xFC0A8000
CONFIG_MCFUART=y
@@ -41,4 +41,6 @@ CONFIG_MTD_RAW_NAND=y
CONFIG_DM_ETH=y
CONFIG_MCFFEC=y
CONFIG_MII=y
+CONFIG_MCFRTC=y
+CONFIG_SYS_MCFRTC_BASE=0xFC0A8000
CONFIG_MCFUART=y
@@ -41,4 +41,6 @@ CONFIG_MTD_RAW_NAND=y
CONFIG_DM_ETH=y
CONFIG_MCFFEC=y
CONFIG_MII=y
+CONFIG_MCFRTC=y
+CONFIG_SYS_MCFRTC_BASE=0xFC0A8000
CONFIG_MCFUART=y
@@ -40,5 +40,7 @@ CONFIG_FLASH_CFI_DRIVER=y
CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
CONFIG_SYS_FLASH_PROTECTION=y
CONFIG_SYS_FLASH_CFI=y
+CONFIG_MCFRTC=y
+CONFIG_SYS_MCFRTC_BASE=0xFC0A8000
CONFIG_MCFUART=y
CONFIG_WATCHDOG=y
@@ -168,6 +168,14 @@ config RTC_MC146818
clock with a wide array of features and 50 bytes of general-purpose,
battery-backed RAM. The driver supports access to the clock and RAM.
+config MCFRTC
+ bool "Use common CF RTC driver"
+ depends on M68K
+
+config SYS_MCFRTC_BASE
+ hex "Base address for RTC in immap.h"
+ depends on MCFRTC
+
config RTC_M41T62
bool "Enable M41T62 driver"
help
@@ -13,10 +13,6 @@
#undef RTC_DEBUG
-#ifndef CONFIG_SYS_MCFRTC_BASE
-#error RTC_BASE is not defined!
-#endif
-
#define isleap(y) ((((y) % 4) == 0 && ((y) % 100) != 0) || ((y) % 400) == 0)
#define STARTOFTIME 1970
@@ -36,8 +36,6 @@
# endif /* CONFIG_SYS_DISCOVER_PHY */
#endif
-#define CONFIG_MCFRTC
-#undef RTC_DEBUG
#define CONFIG_SYS_RTC_CNT (0x8000)
#define CONFIG_SYS_RTC_SETUP (RTC_OCEN_OSCBYP | RTC_OCEN_CLKEN)
@@ -33,9 +33,6 @@
# endif /* CONFIG_SYS_DISCOVER_PHY */
#endif
-#define CONFIG_MCFRTC
-#undef RTC_DEBUG
-
/* I2C */
#ifdef CONFIG_MCFFEC
@@ -35,9 +35,6 @@
# endif /* CONFIG_SYS_DISCOVER_PHY */
#endif
-#define CONFIG_MCFRTC
-#undef RTC_DEBUG
-
/* I2C */
#ifdef CONFIG_MCFFEC
@@ -51,9 +51,6 @@
#define ENABLE_JFFS 1
#endif
-#define CONFIG_MCFRTC
-#undef RTC_DEBUG
-
/* I2C */
/*
@@ -35,7 +35,6 @@
""
/* Realtime clock */
-#undef CONFIG_MCFRTC
#define CONFIG_RTC_MCFRRTC
#define CONFIG_SYS_MCFRRTC_BASE 0xFC0A8000
This converts the following to Kconfig: CONFIG_MCFRTC CONFIG_SYS_MCFRTC_BASE While at it, remove '#undef RTC_DEBUG' from these config files. Signed-off-by: Tom Rini <trini@konsulko.com> --- arch/m68k/include/asm/immap.h | 4 ---- configs/M53017EVB_defconfig | 2 ++ configs/M5329AFEE_defconfig | 2 ++ configs/M5329BFEE_defconfig | 2 ++ configs/M5373EVB_defconfig | 2 ++ configs/astro_mcf5373l_defconfig | 2 ++ drivers/rtc/Kconfig | 8 ++++++++ drivers/rtc/mcfrtc.c | 4 ---- include/configs/M53017EVB.h | 2 -- include/configs/M5329EVB.h | 3 --- include/configs/M5373EVB.h | 3 --- include/configs/astro_mcf5373l.h | 3 --- include/configs/stmark2.h | 1 - 13 files changed, 18 insertions(+), 20 deletions(-)