@@ -19,7 +19,6 @@ CONFIG_DEBUG_UART_BASE=0xfffff200
CONFIG_DEBUG_UART_CLOCK=132000000
CONFIG_DEBUG_UART=y
CONFIG_SYS_LOAD_ADDR=0x22000000
-CONFIG_SYS_EXTRA_OPTIONS="SYS_USE_DATAFLASH_CS0"
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/mtdblock0 mtdparts=atmel_nand:-(root) rw rootfstype=jffs2"
@@ -19,7 +19,6 @@ CONFIG_DEBUG_UART_BASE=0xfffff200
CONFIG_DEBUG_UART_CLOCK=132000000
CONFIG_DEBUG_UART=y
CONFIG_SYS_LOAD_ADDR=0x22000000
-CONFIG_SYS_EXTRA_OPTIONS="SYS_USE_DATAFLASH_CS1"
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/mtdblock0 mtdparts=atmel_nand:-(root) rw rootfstype=jffs2"
@@ -18,7 +18,6 @@ CONFIG_DEBUG_UART_BASE=0xfffff200
CONFIG_DEBUG_UART_CLOCK=100000000
CONFIG_DEBUG_UART=y
CONFIG_SYS_LOAD_ADDR=0x22000000
-CONFIG_SYS_EXTRA_OPTIONS="SYS_USE_DATAFLASH_CS0"
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/mtdblock0 mtdparts=atmel_nand:-(root) rw rootfstype=jffs2"
@@ -18,7 +18,6 @@ CONFIG_DEBUG_UART_BASE=0xfffff200
CONFIG_DEBUG_UART_CLOCK=100000000
CONFIG_DEBUG_UART=y
CONFIG_SYS_LOAD_ADDR=0x22000000
-CONFIG_SYS_EXTRA_OPTIONS="SYS_USE_DATAFLASH_CS3"
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/mtdblock0 mtdparts=atmel_nand:-(root) rw rootfstype=jffs2"
@@ -18,7 +18,6 @@ CONFIG_DEBUG_UART_BASE=0xffffee00
CONFIG_DEBUG_UART_CLOCK=100000000
CONFIG_DEBUG_UART=y
CONFIG_SYS_LOAD_ADDR=0x22000000
-CONFIG_SYS_EXTRA_OPTIONS="SYS_USE_DATAFLASH"
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/mtdblock0 mtdparts=atmel_nand:-(root) rw rootfstype=jffs2"
@@ -18,7 +18,6 @@ CONFIG_DEBUG_UART_BASE=0xffffee00
CONFIG_DEBUG_UART_CLOCK=100000000
CONFIG_DEBUG_UART=y
CONFIG_SYS_LOAD_ADDR=0x22000000
-CONFIG_SYS_EXTRA_OPTIONS="SYS_USE_DATAFLASH"
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/mtdblock0 mtdparts=atmel_nand:-(root) rw rootfstype=jffs2"
@@ -18,7 +18,6 @@ CONFIG_DEBUG_UART_BASE=0xfffff200
CONFIG_DEBUG_UART_CLOCK=100000000
CONFIG_DEBUG_UART=y
CONFIG_SYS_LOAD_ADDR=0x22000000
-CONFIG_SYS_EXTRA_OPTIONS="SYS_USE_DATAFLASH_CS0"
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/mtdblock0 mtdparts=atmel_nand:-(root) rw rootfstype=jffs2"
@@ -18,7 +18,6 @@ CONFIG_DEBUG_UART_BASE=0xfffff200
CONFIG_DEBUG_UART_CLOCK=100000000
CONFIG_DEBUG_UART=y
CONFIG_SYS_LOAD_ADDR=0x22000000
-CONFIG_SYS_EXTRA_OPTIONS="SYS_USE_DATAFLASH_CS3"
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/mtdblock0 mtdparts=atmel_nand:-(root) rw rootfstype=jffs2"
@@ -19,7 +19,6 @@ CONFIG_DEBUG_UART_BASE=0xfffff200
CONFIG_DEBUG_UART_CLOCK=132000000
CONFIG_DEBUG_UART=y
CONFIG_SYS_LOAD_ADDR=0x22000000
-CONFIG_SYS_EXTRA_OPTIONS="SYS_USE_DATAFLASH_CS0"
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/mtdblock0 mtdparts=atmel_nand:-(root) rw rootfstype=jffs2"
@@ -19,7 +19,6 @@ CONFIG_DEBUG_UART_BASE=0xfffff200
CONFIG_DEBUG_UART_CLOCK=132000000
CONFIG_DEBUG_UART=y
CONFIG_SYS_LOAD_ADDR=0x22000000
-CONFIG_SYS_EXTRA_OPTIONS="SYS_USE_DATAFLASH_CS1"
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/mtdblock0 mtdparts=atmel_nand:-(root) rw rootfstype=jffs2"
@@ -18,7 +18,6 @@ CONFIG_DEBUG_UART_BASE=0xfffff200
CONFIG_DEBUG_UART_CLOCK=100000000
CONFIG_DEBUG_UART=y
CONFIG_SYS_LOAD_ADDR=0x22000000
-CONFIG_SYS_EXTRA_OPTIONS="SYS_USE_DATAFLASH"
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/mtdblock0 mtdparts=atmel_nand:-(root) rw rootfstype=jffs2"
@@ -18,7 +18,6 @@ CONFIG_DEBUG_UART_CLOCK=132000000
CONFIG_DEBUG_UART=y
CONFIG_SYS_LOAD_ADDR=0x22000000
CONFIG_FIT=y
-CONFIG_SYS_EXTRA_OPTIONS="SYS_USE_DATAFLASH"
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,768k(uboot)ro,256k(env_redundant),256k(env),512k(dtb),6M(kernel)ro,-(rootfs) rootfstype=ubifs ubi.mtd=6 root=ubi0:rootfs rw"
@@ -19,7 +19,6 @@ CONFIG_DEBUG_UART_BASE=0xfffff200
CONFIG_DEBUG_UART_CLOCK=132000000
CONFIG_DEBUG_UART=y
CONFIG_SYS_LOAD_ADDR=0x22000000
-CONFIG_SYS_EXTRA_OPTIONS="SYS_USE_DATAFLASH_CS0"
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/mtdblock0 mtdparts=atmel_nand:-(root) rw rootfstype=jffs2"
@@ -19,7 +19,6 @@ CONFIG_DEBUG_UART_BASE=0xfffff200
CONFIG_DEBUG_UART_CLOCK=132000000
CONFIG_DEBUG_UART=y
CONFIG_SYS_LOAD_ADDR=0x22000000
-CONFIG_SYS_EXTRA_OPTIONS="SYS_USE_DATAFLASH_CS1"
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/mtdblock0 mtdparts=atmel_nand:-(root) rw rootfstype=jffs2"
@@ -14,7 +14,6 @@ CONFIG_DM_GPIO=y
CONFIG_DEFAULT_DEVICE_TREE="at91sam9263ek"
CONFIG_SYS_LOAD_ADDR=0x20100000
CONFIG_FIT=y
-CONFIG_SYS_EXTRA_OPTIONS="SYS_USE_DATAFLASH"
CONFIG_BOOTDELAY=3
CONFIG_USE_PREBOOT=y
CONFIG_BOARD_EARLY_INIT_F=y
@@ -13,7 +13,6 @@ CONFIG_ENV_SECT_SIZE=0x2000
CONFIG_DM_GPIO=y
CONFIG_DEFAULT_DEVICE_TREE="usb_a9263"
CONFIG_SYS_LOAD_ADDR=0x22000000
-CONFIG_SYS_EXTRA_OPTIONS="SYS_USE_DATAFLASH"
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/mtdblock1 mtdparts=mtdparts=atmel_nand:16m(kernel)ro,120m(root1),-(root2) rw rootfstype=jffs2"
@@ -67,16 +67,4 @@
#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9260"
#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
-#ifdef CONFIG_SYS_USE_DATAFLASH_CS0
-
-/* bootstrap + u-boot + env + linux in dataflash on CS0 */
-#elif defined(CONFIG_SYS_USE_NANDFLASH)
-
-/* bootstrap + u-boot + env + linux in nandflash */
-
-#else /* CONFIG_SYS_USE_MMC */
-/* bootstrap + u-boot + env + linux in mmc */
-/* For FAT system, most cases it should be in the reserved sector */
-#endif
-
#endif
@@ -64,17 +64,4 @@
#endif
#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
-#ifdef CONFIG_SYS_USE_DATAFLASH_CS0
-
-/* bootstrap + u-boot + env + linux in dataflash on CS0 */
-
-#elif CONFIG_SYS_USE_DATAFLASH_CS3
-
-/* bootstrap + u-boot + env + linux in dataflash on CS3 */
-
-#else /* CONFIG_SYS_USE_NANDFLASH */
-
-/* bootstrap + u-boot + env + linux in nandflash */
-#endif
-
#endif
@@ -187,13 +187,4 @@
#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9263"
#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
-#ifdef CONFIG_SYS_USE_DATAFLASH
-
-/* bootstrap + u-boot + env + linux in dataflash on CS0 */
-
-#elif CONFIG_SYS_USE_NANDFLASH
-
-/* bootstrap + u-boot + env + linux in nandflash */
-#endif
-
#endif
@@ -46,18 +46,4 @@
#endif
-/* Ethernet - not present */
-
-#ifdef CONFIG_SYS_USE_DATAFLASH
-
-/* bootstrap + u-boot + env + linux in dataflash on CS0 */
-
-#elif CONFIG_SYS_USE_NANDFLASH
-
-/* bootstrap + u-boot + env + linux in nandflash */
-
-#else /* CONFIG_SYS_USE_MMC */
-
-/* bootstrap + u-boot + env + linux in mmc */
-#endif
#endif
@@ -54,14 +54,6 @@
#endif
#endif
-#ifdef CONFIG_NAND_BOOT
-/* bootstrap + u-boot + env + linux in nandflash */
-#elif defined(CONFIG_SPI_BOOT)
-/* bootstrap + u-boot + env + linux in spi flash */
-#elif defined(CONFIG_SYS_USE_DATAFLASH)
-/* bootstrap + u-boot + env + linux in data flash */
-#endif
-
/* SPL */
#define CONFIG_SPL_MAX_SIZE 0x6000
#define CONFIG_SPL_STACK 0x308000
@@ -69,16 +69,6 @@
/* hw-controller addresses */
#define CONFIG_ET1100_BASE 0x70000000
-#ifdef CONFIG_SYS_USE_DATAFLASH
-
-/* bootstrap + u-boot + env in dataflash on CS0 */
-
-#elif CONFIG_SYS_USE_NANDFLASH
-
-/* bootstrap + u-boot + env + linux in nandflash */
-
-#endif
-
#define CONFIG_SYS_CBSIZE 512
#endif
@@ -160,35 +160,13 @@
#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9261"
#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
-#undef CONFIG_SYS_USE_DATAFLASH_CS0
-#undef CONFIG_SYS_USE_NANDFLASH
-#define CONFIG_SYS_USE_FLASH 1
-
-#ifdef CONFIG_SYS_USE_DATAFLASH_CS0
-
-/* bootstrap + u-boot + env + linux in dataflash on CS0 */
-
-#elif defined(CONFIG_SYS_USE_NANDFLASH) /* CONFIG_SYS_USE_NANDFLASH */
-
-/* bootstrap + u-boot + env + linux in nandflash */
-
-#elif defined (CONFIG_SYS_USE_FLASH)
-/* JFFS Partition offset set */
-#define CONFIG_SYS_JFFS2_FIRST_BANK 0
-#define CONFIG_SYS_JFFS2_NUM_BANKS 1
-
-/* 512k reserved for u-boot */
-#define CONFIG_SYS_JFFS2_FIRST_SECTOR 11
-
-#define CONFIG_CON_ROT "fbcon=rotate:3 "
-
#define CONFIG_EXTRA_ENV_SETTINGS \
"mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
"partition=nand0,0\0" \
"ramargs=setenv bootargs $(bootargs) $(mtdparts)\0" \
"nfsargs=setenv bootargs root=/dev/nfs rw " \
- CONFIG_CON_ROT \
+ "fbcon=rotate:3 " \
"nfsroot=$(serverip):$(rootpath) $(mtdparts)\0" \
"addip=setenv bootargs $(bootargs) " \
"ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)"\
@@ -199,9 +177,6 @@
"run nfsargs;run addip;bootm 22000000\0" \
"flashboot=run ramargs;run addip;bootm 0x10050000\0" \
""
-#else
-#error "Undefined memory device"
-#endif
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 16 * 1024 - \
@@ -183,37 +183,13 @@
#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9263"
#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
-#define CONFIG_SYS_USE_FLASH 1
-#undef CONFIG_SYS_USE_DATAFLASH
-#undef CONFIG_SYS_USE_NANDFLASH
-
-#ifdef CONFIG_SYS_USE_DATAFLASH
-
-/* bootstrap + u-boot + env + linux in dataflash on CS0 */
-
-#elif defined(CONFIG_SYS_USE_NANDFLASH) /* CFG_USE_NANDFLASH */
-
-/* bootstrap + u-boot + env + linux in nandflash */
-
-#elif defined(CONFIG_SYS_USE_FLASH) /* CFG_USE_FLASH */
-/* JFFS Partition offset set */
-#define CONFIG_SYS_JFFS2_FIRST_BANK 0
-#define CONFIG_SYS_JFFS2_NUM_BANKS 1
-
-/* 512k reserved for u-boot */
-#define CONFIG_SYS_JFFS2_FIRST_SECTOR 11
-
-#define CONFIG_ROOTPATH "/ronetix/rootfs"
-
-#define CONFIG_CON_ROT "fbcon=rotate:3 "
-
#define CONFIG_EXTRA_ENV_SETTINGS \
"mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
"partition=nand0,0\0" \
"ramargs=setenv bootargs $(bootargs) $(mtdparts)\0" \
"nfsargs=setenv bootargs root=/dev/nfs rw " \
- CONFIG_CON_ROT \
+ "fbcon=rotate:3 " \
"nfsroot=$(serverip):$(rootpath) $(mtdparts)\0" \
"addip=setenv bootargs $(bootargs) " \
"ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)"\
@@ -225,10 +201,6 @@
"flashboot=run ramargs;run addip;bootm 0x10050000\0" \
""
-#else
-#error "Undefined memory device"
-#endif
-
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 16 * 1024 - \
GENERATED_GBL_DATA_SIZE)
There are a handful of variants around CONFIG_SYS_USE_DATAFLASH and none of them now control anything further within their board config.h files, so remove these from CONFIG_SYS_EXTRA_OPTIONS and then remove the empty blocks in the board config.h files. In a few places further clean up related logic. Signed-off-by: Tom Rini <trini@konsulko.com> --- configs/at91sam9260ek_dataflash_cs0_defconfig | 1 - configs/at91sam9260ek_dataflash_cs1_defconfig | 1 - configs/at91sam9261ek_dataflash_cs0_defconfig | 1 - configs/at91sam9261ek_dataflash_cs3_defconfig | 1 - configs/at91sam9263ek_dataflash_cs0_defconfig | 1 - configs/at91sam9263ek_dataflash_defconfig | 1 - configs/at91sam9g10ek_dataflash_cs0_defconfig | 1 - configs/at91sam9g10ek_dataflash_cs3_defconfig | 1 - configs/at91sam9g20ek_dataflash_cs0_defconfig | 1 - configs/at91sam9g20ek_dataflash_cs1_defconfig | 1 - configs/at91sam9rlek_dataflash_defconfig | 1 - configs/at91sam9x5ek_dataflash_defconfig | 1 - configs/at91sam9xeek_dataflash_cs0_defconfig | 1 - configs/at91sam9xeek_dataflash_cs1_defconfig | 1 - configs/meesc_dataflash_defconfig | 1 - configs/usb_a9263_dataflash_defconfig | 1 - include/configs/at91sam9260ek.h | 12 -------- include/configs/at91sam9261ek.h | 13 -------- include/configs/at91sam9263ek.h | 9 ------ include/configs/at91sam9rlek.h | 14 --------- include/configs/at91sam9x5ek.h | 8 ----- include/configs/meesc.h | 10 ------- include/configs/pm9261.h | 27 +---------------- include/configs/pm9263.h | 30 +------------------ 24 files changed, 2 insertions(+), 137 deletions(-)