diff mbox series

[2/7] board: gateworks: gw_ventana: move SPL uart config out of common

Message ID 20220308002406.22433-3-tharvey@gateworks.com
State Accepted
Commit d169313dda3cd92e3317867aec0b1b6c4799a99d
Delegated to: Stefano Babic
Headers show
Series Add Gateworks System Controller driver | expand

Commit Message

Tim Harvey March 8, 2022, 12:24 a.m. UTC
Since DM_SERIAL is used for U-Boot we no longer need legacy UART code in
common.c shared by the SPL and U-Boot. Move the legacy UART config to
the non-DM SPL.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
---
 board/gateworks/gw_ventana/common.c         | 11 -----------
 board/gateworks/gw_ventana/common.h         |  2 --
 board/gateworks/gw_ventana/gw_ventana_spl.c | 11 +++++++++++
 3 files changed, 11 insertions(+), 13 deletions(-)
diff mbox series

Patch

diff --git a/board/gateworks/gw_ventana/common.c b/board/gateworks/gw_ventana/common.c
index 2be6518b63e0..6b8900e45ba7 100644
--- a/board/gateworks/gw_ventana/common.c
+++ b/board/gateworks/gw_ventana/common.c
@@ -19,17 +19,6 @@ 
 
 #include "common.h"
 
-/* UART2: Serial Console */
-static iomux_v3_cfg_t const uart2_pads[] = {
-	IOMUX_PADS(PAD_SD4_DAT7__UART2_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)),
-	IOMUX_PADS(PAD_SD4_DAT4__UART2_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)),
-};
-
-void setup_iomux_uart(void)
-{
-	SETUP_IOMUX_PADS(uart2_pads);
-}
-
 /* MMC */
 static iomux_v3_cfg_t const gw5904_emmc_pads[] = {
 	IOMUX_PADS(PAD_SD3_DAT0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
diff --git a/board/gateworks/gw_ventana/common.h b/board/gateworks/gw_ventana/common.h
index 526ff066b629..d7f60a0b5d92 100644
--- a/board/gateworks/gw_ventana/common.h
+++ b/board/gateworks/gw_ventana/common.h
@@ -79,8 +79,6 @@  struct ventana {
 
 extern struct ventana gpio_cfg[GW_UNKNOWN];
 
-/* configure uart iomux */
-void setup_iomux_uart(void);
 /* configure gpio iomux/defaults */
 void setup_iomux_gpio(int board, struct ventana_board_info *);
 /* late setup of GPIO (configuration per baseboard and env) */
diff --git a/board/gateworks/gw_ventana/gw_ventana_spl.c b/board/gateworks/gw_ventana/gw_ventana_spl.c
index 60e2768d2eba..2d6ef30b9b5a 100644
--- a/board/gateworks/gw_ventana/gw_ventana_spl.c
+++ b/board/gateworks/gw_ventana/gw_ventana_spl.c
@@ -671,6 +671,17 @@  static void ccgr_init(void)
 	writel(0x000003FF, &ccm->CCGR6);
 }
 
+/* UART2: Serial Console */
+static const iomux_v3_cfg_t uart2_pads[] = {
+	IOMUX_PADS(PAD_SD4_DAT7__UART2_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)),
+	IOMUX_PADS(PAD_SD4_DAT4__UART2_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)),
+};
+
+void setup_iomux_uart(void)
+{
+	SETUP_IOMUX_PADS(uart2_pads);
+}
+
 /*
  * I2C pad configs:
  * I2C1: GSC