diff mbox series

[18/27] imx: imx8ulp_evk: call the handshake with M33

Message ID 20220214124735.25580-19-peng.fan@oss.nxp.com
State Superseded
Delegated to: Stefano Babic
Headers show
Series imx: imx8ulp: misc update from downstream | expand

Commit Message

Peng Fan (OSS) Feb. 14, 2022, 12:47 p.m. UTC 
From: Ye Li <ye.li@nxp.com>

If M33 handshake is successful, TPM and DSI panel MUX setting is
done by M33, no need to set them.
If handshake is failed or M33 is not booted, continue the TPM
and DSI panel MUX setting

Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
 board/freescale/imx8ulp_evk/imx8ulp_evk.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/board/freescale/imx8ulp_evk/imx8ulp_evk.c b/board/freescale/imx8ulp_evk/imx8ulp_evk.c
index 1502e4dbb6..b61a4cfbe8 100644
--- a/board/freescale/imx8ulp_evk/imx8ulp_evk.c
+++ b/board/freescale/imx8ulp_evk/imx8ulp_evk.c
@@ -101,10 +101,18 @@  void mipi_dsi_panel_backlight(void)
 
 int board_init(void)
 {
+	int sync = -ENODEV;
+
 	if (IS_ENABLED(CONFIG_FEC_MXC))
 		setup_fec();
 
-	if (IS_ENABLED(CONFIG_DM_VIDEO)) {
+	if (m33_image_booted()) {
+		sync = m33_image_handshake(1000);
+		printf("M33 Sync: %s\n", sync ? "Timeout" : "OK");
+	}
+
+	/* When sync with M33 is failed, use local driver to set for video */
+	if (sync != 0 && IS_ENABLED(CONFIG_DM_VIDEO)) {
 		mipi_dsi_mux_panel();
 		mipi_dsi_panel_backlight();
 	}