diff mbox series

board: sama7g5ek: set blue led on at boot time

Message ID 20211220081239.758276-1-eugen.hristev@microchip.com
State Accepted
Commit 93ddc09da26c04270e5829a8efbc299ccaa3d455
Delegated to: Eugen Hristev
Headers show
Series board: sama7g5ek: set blue led on at boot time | expand

Commit Message

Eugen Hristev Dec. 20, 2021, 8:12 a.m. UTC 
From: Mihai Sain <mihai.sain@microchip.com>

Set blue led on at boot time in order to highlight that u-boot is loaded.

Signed-off-by: Mihai Sain <mihai.sain@microchip.com>
---
 board/atmel/sama7g5ek/sama7g5ek.c | 9 +++++++++
 1 file changed, 9 insertions(+)

Comments

Eugen Hristev Jan. 13, 2022, 9:49 a.m. UTC | #1 
On 12/20/21 10:12 AM, Eugen Hristev wrote:
> From: Mihai Sain <mihai.sain@microchip.com>
> 
> Set blue led on at boot time in order to highlight that u-boot is loaded.
> 
> Signed-off-by: Mihai Sain <mihai.sain@microchip.com>
> ---

Applied to u-boot-at91/master, thanks !
diff mbox series

Patch

diff --git a/board/atmel/sama7g5ek/sama7g5ek.c b/board/atmel/sama7g5ek/sama7g5ek.c
index 4df43d81f8..5444799dfb 100644
--- a/board/atmel/sama7g5ek/sama7g5ek.c
+++ b/board/atmel/sama7g5ek/sama7g5ek.c
@@ -17,6 +17,13 @@ 
 
 DECLARE_GLOBAL_DATA_PTR;
 
+static void board_leds_init(void)
+{
+	atmel_pio4_set_pio_output(AT91_PIO_PORTB, 8, 0);	/* LED RED */
+	atmel_pio4_set_pio_output(AT91_PIO_PORTA, 13, 0);	/* LED GREEN */
+	atmel_pio4_set_pio_output(AT91_PIO_PORTD, 20, 1);	/* LED BLUE */
+}
+
 int board_late_init(void)
 {
 	return 0;
@@ -65,6 +72,8 @@  int board_init(void)
 	/* address of boot parameters */
 	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
 
+	board_leds_init();
+
 	return 0;
 }