| Message ID | 20210603132207.9469-1-aford173@gmail.com |
|---|---|
| State | Deferred |
| Delegated to: | Tom Rini |
| Headers | show |
| Series | [V2] ARM: rmobile: beacon-renesom: Enable QSPI NOR Flash | expand |
On Thu, Jun 3, 2021 at 8:22 AM Adam Ford <aford173@gmail.com> wrote: > > There is a QSPI NOR flash part on the board. Because this chip isn't > yet supported in Linux, but it is supported in U-Boot, and the > face that the RPC_SPI compatible names are different in U-Boot and > Linux, the device tree updates are confined to -u-boot.dtsi files. > > In order to use the QSPI, TF-A must leave RPC unlocked by compiling > TF-A with RZG_RPC_HYPERFLASH_LOCKED=0. > > Signed-off-by: Adam Ford <aford173@gmail.com> > Reviewed-by: Biju Bas <biju.das.jz@bp.renesas.com> Marek, It looks like this [1] was assigned to you. its been a couple months. any chance this could get applied or get feedback? thanks, adam [1] - https://patchwork.ozlabs.org/project/uboot/patch/20210603132207.9469-1-aford173@gmail.com/ > --- > V2: Add note to commit message about TF-A > No functional changes > > diff --git a/arch/arm/dts/r8a774a1-beacon-rzg2m-kit-u-boot.dtsi b/arch/arm/dts/r8a774a1-beacon-rzg2m-kit-u-boot.dtsi > index a0c0a7f35c..06271537b7 100644 > --- a/arch/arm/dts/r8a774a1-beacon-rzg2m-kit-u-boot.dtsi > +++ b/arch/arm/dts/r8a774a1-beacon-rzg2m-kit-u-boot.dtsi > @@ -4,11 +4,19 @@ > */ > > / { > + aliases { > + spi0 = &rpc; > + }; > + > soc { > u-boot,dm-pre-reloc; > }; > }; > > +&avb { > + phy-mode = "rgmii-txid"; > +}; > + > &cpg { > u-boot,dm-pre-reloc; > }; > @@ -25,6 +33,25 @@ > u-boot,dm-pre-reloc; > }; > > +&rpc { > + compatible = "renesas,rcar-gen3-rpc"; > + num-cs = <1>; > + spi-max-frequency = <40000000>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "okay"; > + > + flash0: spi-flash@0 { > + #address-cells = <1>; > + #size-cells = <1>; > + reg = <0>; > + compatible = "spi-flash", "jedec,spi-nor"; > + spi-max-frequency = <40000000>; > + spi-tx-bus-width = <1>; > + spi-rx-bus-width = <1>; > + }; > +}; > + > &sdhi0 { > /delete-property/ cd-gpios; > }; > diff --git a/arch/arm/dts/r8a774b1-beacon-rzg2n-kit-u-boot.dtsi b/arch/arm/dts/r8a774b1-beacon-rzg2n-kit-u-boot.dtsi > index a0c0a7f35c..be0ce54e55 100644 > --- a/arch/arm/dts/r8a774b1-beacon-rzg2n-kit-u-boot.dtsi > +++ b/arch/arm/dts/r8a774b1-beacon-rzg2n-kit-u-boot.dtsi > @@ -4,6 +4,10 @@ > */ > > / { > + aliases { > + spi0 = &rpc; > + }; > + > soc { > u-boot,dm-pre-reloc; > }; > @@ -25,6 +29,25 @@ > u-boot,dm-pre-reloc; > }; > > +&rpc { > + compatible = "renesas,rcar-gen3-rpc"; > + num-cs = <1>; > + spi-max-frequency = <40000000>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "okay"; > + > + flash0: spi-flash@0 { > + #address-cells = <1>; > + #size-cells = <1>; > + reg = <0>; > + compatible = "spi-flash", "jedec,spi-nor"; > + spi-max-frequency = <40000000>; > + spi-tx-bus-width = <1>; > + spi-rx-bus-width = <1>; > + }; > +}; > + > &sdhi0 { > /delete-property/ cd-gpios; > }; > diff --git a/arch/arm/dts/r8a774e1-beacon-rzg2h-kit-u-boot.dtsi b/arch/arm/dts/r8a774e1-beacon-rzg2h-kit-u-boot.dtsi > index eef200af2d..228391e0df 100644 > --- a/arch/arm/dts/r8a774e1-beacon-rzg2h-kit-u-boot.dtsi > +++ b/arch/arm/dts/r8a774e1-beacon-rzg2h-kit-u-boot.dtsi > @@ -4,6 +4,10 @@ > */ > > / { > + aliases { > + spi0 = &rpc; > + }; > + > soc { > u-boot,dm-pre-reloc; > }; > @@ -25,6 +29,25 @@ > u-boot,dm-pre-reloc; > }; > > +&rpc { > + compatible = "renesas,rcar-gen3-rpc"; > + num-cs = <1>; > + spi-max-frequency = <40000000>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "okay"; > + > + flash0: spi-flash@0 { > + #address-cells = <1>; > + #size-cells = <1>; > + reg = <0>; > + compatible = "spi-flash", "jedec,spi-nor"; > + spi-max-frequency = <40000000>; > + spi-tx-bus-width = <1>; > + spi-rx-bus-width = <1>; > + }; > +}; > + > &sdhi0 { > /delete-property/ cd-gpios; > sd-uhs-sdr12; > diff --git a/configs/r8a774a1_beacon_defconfig b/configs/r8a774a1_beacon_defconfig > index 4a87a9a31f..c115f548a3 100644 > --- a/configs/r8a774a1_beacon_defconfig > +++ b/configs/r8a774a1_beacon_defconfig > @@ -18,7 +18,9 @@ CONFIG_CMD_BOOTZ=y > CONFIG_CMD_GPIO=y > CONFIG_CMD_I2C=y > CONFIG_CMD_MMC=y > +CONFIG_CMD_MTD=y > CONFIG_CMD_PART=y > +CONFIG_CMD_SPI=y > CONFIG_CMD_USB=y > CONFIG_CMD_DHCP=y > CONFIG_CMD_MII=y > @@ -47,6 +49,10 @@ CONFIG_MMC_IO_VOLTAGE=y > CONFIG_MMC_UHS_SUPPORT=y > CONFIG_MMC_HS200_SUPPORT=y > CONFIG_RENESAS_SDHI=y > +CONFIG_MTD=y > +CONFIG_DM_MTD=y > +CONFIG_DM_SPI_FLASH=y > +CONFIG_SPI_FLASH_WINBOND=y > CONFIG_BITBANGMII=y > CONFIG_PHY_REALTEK=y > CONFIG_DM_ETH=y > @@ -56,6 +62,9 @@ CONFIG_DM_REGULATOR_FIXED=y > CONFIG_DM_REGULATOR_GPIO=y > CONFIG_SPECIFY_CONSOLE_INDEX=y > CONFIG_SCIF_CONSOLE=y > +CONFIG_SPI=y > +CONFIG_DM_SPI=y > +CONFIG_RENESAS_RPC_SPI=y > CONFIG_USB=y > CONFIG_DM_USB=y > CONFIG_USB_XHCI_HCD=y > diff --git a/configs/r8a774b1_beacon_defconfig b/configs/r8a774b1_beacon_defconfig > index 2c31222525..fe7bac048a 100644 > --- a/configs/r8a774b1_beacon_defconfig > +++ b/configs/r8a774b1_beacon_defconfig > @@ -18,7 +18,9 @@ CONFIG_CMD_BOOTZ=y > CONFIG_CMD_GPIO=y > CONFIG_CMD_I2C=y > CONFIG_CMD_MMC=y > +CONFIG_CMD_MTD=y > CONFIG_CMD_PART=y > +CONFIG_CMD_SPI=y > CONFIG_CMD_USB=y > CONFIG_CMD_DHCP=y > CONFIG_CMD_MII=y > @@ -48,6 +50,10 @@ CONFIG_MMC_UHS_SUPPORT=y > CONFIG_MMC_HS200_SUPPORT=y > CONFIG_RENESAS_SDHI=y > CONFIG_MTD=y > +CONFIG_DM_MTD=y > +CONFIG_DM_SPI_FLASH=y > +CONFIG_SPI_FLASH_WINBOND=y > +CONFIG_MTD=y > CONFIG_DM_SPI_FLASH=y > CONFIG_BITBANGMII=y > CONFIG_PHY_REALTEK=y > @@ -61,6 +67,9 @@ CONFIG_SCIF_CONSOLE=y > CONFIG_SPI=y > CONFIG_DM_SPI=y > CONFIG_RENESAS_RPC_SPI=y > +CONFIG_SPI=y > +CONFIG_DM_SPI=y > +CONFIG_RENESAS_RPC_SPI=y > CONFIG_USB=y > CONFIG_DM_USB=y > CONFIG_USB_XHCI_HCD=y > diff --git a/configs/r8a774e1_beacon_defconfig b/configs/r8a774e1_beacon_defconfig > index a814d6ad63..37097b0088 100644 > --- a/configs/r8a774e1_beacon_defconfig > +++ b/configs/r8a774e1_beacon_defconfig > @@ -18,7 +18,9 @@ CONFIG_CMD_BOOTZ=y > CONFIG_CMD_GPIO=y > CONFIG_CMD_I2C=y > CONFIG_CMD_MMC=y > +CONFIG_CMD_MTD=y > CONFIG_CMD_PART=y > +CONFIG_CMD_SPI=y > CONFIG_CMD_USB=y > CONFIG_CMD_DHCP=y > CONFIG_CMD_MII=y > @@ -47,6 +49,10 @@ CONFIG_MMC_IO_VOLTAGE=y > CONFIG_MMC_UHS_SUPPORT=y > CONFIG_MMC_HS200_SUPPORT=y > CONFIG_RENESAS_SDHI=y > +CONFIG_MTD=y > +CONFIG_DM_MTD=y > +CONFIG_DM_SPI_FLASH=y > +CONFIG_SPI_FLASH_WINBOND=y > CONFIG_BITBANGMII=y > CONFIG_PHY_REALTEK=y > CONFIG_DM_ETH=y > @@ -56,6 +62,9 @@ CONFIG_DM_REGULATOR_FIXED=y > CONFIG_DM_REGULATOR_GPIO=y > CONFIG_SPECIFY_CONSOLE_INDEX=y > CONFIG_SCIF_CONSOLE=y > +CONFIG_SPI=y > +CONFIG_DM_SPI=y > +CONFIG_RENESAS_RPC_SPI=y > CONFIG_USB=y > CONFIG_DM_USB=y > CONFIG_USB_XHCI_HCD=y > -- > 2.17.1 >
On 8/23/21 2:23 PM, Adam Ford wrote: > On Thu, Jun 3, 2021 at 8:22 AM Adam Ford <aford173@gmail.com> wrote: >> >> There is a QSPI NOR flash part on the board. Because this chip isn't >> yet supported in Linux, but it is supported in U-Boot, and the >> face that the RPC_SPI compatible names are different in U-Boot and >> Linux, the device tree updates are confined to -u-boot.dtsi files. >> >> In order to use the QSPI, TF-A must leave RPC unlocked by compiling >> TF-A with RZG_RPC_HYPERFLASH_LOCKED=0. >> >> Signed-off-by: Adam Ford <aford173@gmail.com> >> Reviewed-by: Biju Bas <biju.das.jz@bp.renesas.com> > > Marek, > > It looks like this [1] was assigned to you. its been a couple months. > any chance this could get applied or get feedback? Rebase, fix the below, resend, I'll pick it. Also, probably don't wait "a few months" and let the frustration grow next time, week or two usually means the patch was missed. >> / { >> + aliases { >> + spi0 = &rpc; >> + }; >> + >> soc { >> u-boot,dm-pre-reloc; >> }; >> }; >> >> +&avb { >> + phy-mode = "rgmii-txid"; >> +}; >> + Do you really need ethernet for QSPI NOR ? >> &cpg { >> u-boot,dm-pre-reloc; >> }; >> @@ -25,6 +33,25 @@ >> u-boot,dm-pre-reloc; >> }; >> >> +&rpc { >> + compatible = "renesas,rcar-gen3-rpc"; >> + num-cs = <1>; >> + spi-max-frequency = <40000000>; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + status = "okay"; btw. can those duplicate entries be somehow deduplicated into some yourboard.dtsi file ? >> + flash0: spi-flash@0 { >> + #address-cells = <1>; >> + #size-cells = <1>; >> + reg = <0>; >> + compatible = "spi-flash", "jedec,spi-nor"; >> + spi-max-frequency = <40000000>; >> + spi-tx-bus-width = <1>; >> + spi-rx-bus-width = <1>; >> + }; >> +}; [...]
On Mon, Aug 23, 2021 at 8:50 AM Marek Vasut <marex@denx.de> wrote: > > On 8/23/21 2:23 PM, Adam Ford wrote: > > On Thu, Jun 3, 2021 at 8:22 AM Adam Ford <aford173@gmail.com> wrote: > >> > >> There is a QSPI NOR flash part on the board. Because this chip isn't > >> yet supported in Linux, but it is supported in U-Boot, and the > >> face that the RPC_SPI compatible names are different in U-Boot and > >> Linux, the device tree updates are confined to -u-boot.dtsi files. > >> > >> In order to use the QSPI, TF-A must leave RPC unlocked by compiling > >> TF-A with RZG_RPC_HYPERFLASH_LOCKED=0. > >> > >> Signed-off-by: Adam Ford <aford173@gmail.com> > >> Reviewed-by: Biju Bas <biju.das.jz@bp.renesas.com> > > > > Marek, > > > > It looks like this [1] was assigned to you. its been a couple months. > > any chance this could get applied or get feedback? > > Rebase, fix the below, resend, I'll pick it. no problem. > > Also, probably don't wait "a few months" and let the frustration grow > next time, week or two usually means the patch was missed. I would have sooner, but I was out on medical leave for 6 weeks with a broken wrist. I am just trying to catch up now. adam > > >> / { > >> + aliases { > >> + spi0 = &rpc; > >> + }; > >> + > >> soc { > >> u-boot,dm-pre-reloc; > >> }; > >> }; > >> > >> +&avb { > >> + phy-mode = "rgmii-txid"; > >> +}; > >> + > > Do you really need ethernet for QSPI NOR ? > > >> &cpg { > >> u-boot,dm-pre-reloc; > >> }; > >> @@ -25,6 +33,25 @@ > >> u-boot,dm-pre-reloc; > >> }; > >> > >> +&rpc { > >> + compatible = "renesas,rcar-gen3-rpc"; > >> + num-cs = <1>; > >> + spi-max-frequency = <40000000>; > >> + #address-cells = <1>; > >> + #size-cells = <0>; > >> + status = "okay"; > > btw. can those duplicate entries be somehow deduplicated into some > yourboard.dtsi file ? > > >> + flash0: spi-flash@0 { > >> + #address-cells = <1>; > >> + #size-cells = <1>; > >> + reg = <0>; > >> + compatible = "spi-flash", "jedec,spi-nor"; > >> + spi-max-frequency = <40000000>; > >> + spi-tx-bus-width = <1>; > >> + spi-rx-bus-width = <1>; > >> + }; > >> +}; > > [...]
On 8/23/21 5:40 PM, Adam Ford wrote: > On Mon, Aug 23, 2021 at 8:50 AM Marek Vasut <marex@denx.de> wrote: >> >> On 8/23/21 2:23 PM, Adam Ford wrote: >>> On Thu, Jun 3, 2021 at 8:22 AM Adam Ford <aford173@gmail.com> wrote: >>>> >>>> There is a QSPI NOR flash part on the board. Because this chip isn't >>>> yet supported in Linux, but it is supported in U-Boot, and the >>>> face that the RPC_SPI compatible names are different in U-Boot and >>>> Linux, the device tree updates are confined to -u-boot.dtsi files. >>>> >>>> In order to use the QSPI, TF-A must leave RPC unlocked by compiling >>>> TF-A with RZG_RPC_HYPERFLASH_LOCKED=0. >>>> >>>> Signed-off-by: Adam Ford <aford173@gmail.com> >>>> Reviewed-by: Biju Bas <biju.das.jz@bp.renesas.com> >>> >>> Marek, >>> >>> It looks like this [1] was assigned to you. its been a couple months. >>> any chance this could get applied or get feedback? >> >> Rebase, fix the below, resend, I'll pick it. > > no problem. > >> >> Also, probably don't wait "a few months" and let the frustration grow >> next time, week or two usually means the patch was missed. > > I would have sooner, but I was out on medical leave for 6 weeks with a > broken wrist. I am just trying to catch up now. Oh well, then just fix the patch up and resend when you have time.
diff --git a/arch/arm/dts/r8a774a1-beacon-rzg2m-kit-u-boot.dtsi b/arch/arm/dts/r8a774a1-beacon-rzg2m-kit-u-boot.dtsi index a0c0a7f35c..06271537b7 100644 --- a/arch/arm/dts/r8a774a1-beacon-rzg2m-kit-u-boot.dtsi +++ b/arch/arm/dts/r8a774a1-beacon-rzg2m-kit-u-boot.dtsi @@ -4,11 +4,19 @@ */ / { + aliases { + spi0 = &rpc; + }; + soc { u-boot,dm-pre-reloc; }; }; +&avb { + phy-mode = "rgmii-txid"; +}; + &cpg { u-boot,dm-pre-reloc; }; @@ -25,6 +33,25 @@ u-boot,dm-pre-reloc; }; +&rpc { + compatible = "renesas,rcar-gen3-rpc"; + num-cs = <1>; + spi-max-frequency = <40000000>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + flash0: spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + compatible = "spi-flash", "jedec,spi-nor"; + spi-max-frequency = <40000000>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <1>; + }; +}; + &sdhi0 { /delete-property/ cd-gpios; }; diff --git a/arch/arm/dts/r8a774b1-beacon-rzg2n-kit-u-boot.dtsi b/arch/arm/dts/r8a774b1-beacon-rzg2n-kit-u-boot.dtsi index a0c0a7f35c..be0ce54e55 100644 --- a/arch/arm/dts/r8a774b1-beacon-rzg2n-kit-u-boot.dtsi +++ b/arch/arm/dts/r8a774b1-beacon-rzg2n-kit-u-boot.dtsi @@ -4,6 +4,10 @@ */ / { + aliases { + spi0 = &rpc; + }; + soc { u-boot,dm-pre-reloc; }; @@ -25,6 +29,25 @@ u-boot,dm-pre-reloc; }; +&rpc { + compatible = "renesas,rcar-gen3-rpc"; + num-cs = <1>; + spi-max-frequency = <40000000>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + flash0: spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + compatible = "spi-flash", "jedec,spi-nor"; + spi-max-frequency = <40000000>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <1>; + }; +}; + &sdhi0 { /delete-property/ cd-gpios; }; diff --git a/arch/arm/dts/r8a774e1-beacon-rzg2h-kit-u-boot.dtsi b/arch/arm/dts/r8a774e1-beacon-rzg2h-kit-u-boot.dtsi index eef200af2d..228391e0df 100644 --- a/arch/arm/dts/r8a774e1-beacon-rzg2h-kit-u-boot.dtsi +++ b/arch/arm/dts/r8a774e1-beacon-rzg2h-kit-u-boot.dtsi @@ -4,6 +4,10 @@ */ / { + aliases { + spi0 = &rpc; + }; + soc { u-boot,dm-pre-reloc; }; @@ -25,6 +29,25 @@ u-boot,dm-pre-reloc; }; +&rpc { + compatible = "renesas,rcar-gen3-rpc"; + num-cs = <1>; + spi-max-frequency = <40000000>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + flash0: spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + compatible = "spi-flash", "jedec,spi-nor"; + spi-max-frequency = <40000000>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <1>; + }; +}; + &sdhi0 { /delete-property/ cd-gpios; sd-uhs-sdr12; diff --git a/configs/r8a774a1_beacon_defconfig b/configs/r8a774a1_beacon_defconfig index 4a87a9a31f..c115f548a3 100644 --- a/configs/r8a774a1_beacon_defconfig +++ b/configs/r8a774a1_beacon_defconfig @@ -18,7 +18,9 @@ CONFIG_CMD_BOOTZ=y CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +CONFIG_CMD_MTD=y CONFIG_CMD_PART=y +CONFIG_CMD_SPI=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y @@ -47,6 +49,10 @@ CONFIG_MMC_IO_VOLTAGE=y CONFIG_MMC_UHS_SUPPORT=y CONFIG_MMC_HS200_SUPPORT=y CONFIG_RENESAS_SDHI=y +CONFIG_MTD=y +CONFIG_DM_MTD=y +CONFIG_DM_SPI_FLASH=y +CONFIG_SPI_FLASH_WINBOND=y CONFIG_BITBANGMII=y CONFIG_PHY_REALTEK=y CONFIG_DM_ETH=y @@ -56,6 +62,9 @@ CONFIG_DM_REGULATOR_FIXED=y CONFIG_DM_REGULATOR_GPIO=y CONFIG_SPECIFY_CONSOLE_INDEX=y CONFIG_SCIF_CONSOLE=y +CONFIG_SPI=y +CONFIG_DM_SPI=y +CONFIG_RENESAS_RPC_SPI=y CONFIG_USB=y CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y diff --git a/configs/r8a774b1_beacon_defconfig b/configs/r8a774b1_beacon_defconfig index 2c31222525..fe7bac048a 100644 --- a/configs/r8a774b1_beacon_defconfig +++ b/configs/r8a774b1_beacon_defconfig @@ -18,7 +18,9 @@ CONFIG_CMD_BOOTZ=y CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +CONFIG_CMD_MTD=y CONFIG_CMD_PART=y +CONFIG_CMD_SPI=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y @@ -48,6 +50,10 @@ CONFIG_MMC_UHS_SUPPORT=y CONFIG_MMC_HS200_SUPPORT=y CONFIG_RENESAS_SDHI=y CONFIG_MTD=y +CONFIG_DM_MTD=y +CONFIG_DM_SPI_FLASH=y +CONFIG_SPI_FLASH_WINBOND=y +CONFIG_MTD=y CONFIG_DM_SPI_FLASH=y CONFIG_BITBANGMII=y CONFIG_PHY_REALTEK=y @@ -61,6 +67,9 @@ CONFIG_SCIF_CONSOLE=y CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_RENESAS_RPC_SPI=y +CONFIG_SPI=y +CONFIG_DM_SPI=y +CONFIG_RENESAS_RPC_SPI=y CONFIG_USB=y CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y diff --git a/configs/r8a774e1_beacon_defconfig b/configs/r8a774e1_beacon_defconfig index a814d6ad63..37097b0088 100644 --- a/configs/r8a774e1_beacon_defconfig +++ b/configs/r8a774e1_beacon_defconfig @@ -18,7 +18,9 @@ CONFIG_CMD_BOOTZ=y CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +CONFIG_CMD_MTD=y CONFIG_CMD_PART=y +CONFIG_CMD_SPI=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y @@ -47,6 +49,10 @@ CONFIG_MMC_IO_VOLTAGE=y CONFIG_MMC_UHS_SUPPORT=y CONFIG_MMC_HS200_SUPPORT=y CONFIG_RENESAS_SDHI=y +CONFIG_MTD=y +CONFIG_DM_MTD=y +CONFIG_DM_SPI_FLASH=y +CONFIG_SPI_FLASH_WINBOND=y CONFIG_BITBANGMII=y CONFIG_PHY_REALTEK=y CONFIG_DM_ETH=y @@ -56,6 +62,9 @@ CONFIG_DM_REGULATOR_FIXED=y CONFIG_DM_REGULATOR_GPIO=y CONFIG_SPECIFY_CONSOLE_INDEX=y CONFIG_SCIF_CONSOLE=y +CONFIG_SPI=y +CONFIG_DM_SPI=y +CONFIG_RENESAS_RPC_SPI=y CONFIG_USB=y CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y