@@ -8,6 +8,42 @@
chosen {
u-boot,dm-spl;
};
+
+ clocks {
+ u-boot,dm-spl;
+ };
+
+ soc {
+ u-boot,dm-spl;
+ };
+};
+
+&osc {
+ u-boot,dm-spl;
+};
+
+&clks {
+ u-boot,dm-spl;
+};
+
+&gpio1 {
+ u-boot,dm-spl;
+};
+
+&gpio2 {
+ u-boot,dm-spl;
+};
+
+&gpio3 {
+ u-boot,dm-spl;
+};
+
+&gpio4 {
+ u-boot,dm-spl;
+};
+
+&gpio5 {
+ u-boot,dm-spl;
};
&gpt1 {
@@ -19,6 +55,8 @@
};
&semc {
+ u-boot,dm-spl;
+
bank1: bank@0 {
u-boot,dm-spl;
};
@@ -27,10 +27,7 @@
};
clocks {
- u-boot,dm-spl;
-
osc: osc {
- u-boot,dm-spl;
compatible = "fsl,imx-osc", "fixed-clock";
#clock-cells = <0>;
clock-frequency = <24000000>;
@@ -38,10 +35,7 @@
};
soc {
- u-boot,dm-spl;
-
semc: semc@402f0000 {
- u-boot,dm-spl;
compatible = "fsl,imxrt-semc";
reg = <0x402f0000 0x4000>;
clocks = <&clks IMXRT1050_CLK_SEMC>;
@@ -66,7 +60,6 @@
};
clks: ccm@400fc000 {
- u-boot,dm-spl;
compatible = "fsl,imxrt1050-ccm";
reg = <0x400fc000 0x4000>;
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
@@ -75,7 +68,6 @@
};
usdhc1: usdhc@402c0000 {
- u-boot,dm-spl;
compatible = "fsl,imxrt-usdhc";
reg = <0x402c0000 0x10000>;
interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
@@ -88,7 +80,6 @@
};
gpio1: gpio@401b8000 {
- u-boot,dm-spl;
compatible = "fsl,imxrt-gpio", "fsl,imx35-gpio";
reg = <0x401b8000 0x4000>;
interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
@@ -100,7 +91,6 @@
};
gpio2: gpio@401bc000 {
- u-boot,dm-spl;
compatible = "fsl,imxrt-gpio", "fsl,imx35-gpio";
reg = <0x401bc000 0x4000>;
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
@@ -112,7 +102,6 @@
};
gpio3: gpio@401c0000 {
- u-boot,dm-spl;
compatible = "fsl,imxrt-gpio", "fsl,imx35-gpio";
reg = <0x401c0000 0x4000>;
interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
@@ -124,7 +113,6 @@
};
gpio4: gpio@401c4000 {
- u-boot,dm-spl;
compatible = "fsl,imxrt-gpio", "fsl,imx35-gpio";
reg = <0x401c4000 0x4000>;
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
@@ -136,7 +124,6 @@
};
gpio5: gpio@400c0000 {
- u-boot,dm-spl;
compatible = "fsl,imxrt-gpio", "fsl,imx35-gpio";
reg = <0x400c0000 0x4000>;
interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
At the moment a lot of u-boot,dm-spl properties are present in board .dts file but this is not correct since u-boot,dm-spl property is u-boot specific and must be listed into the separate imrt1050-evk-u-boot.dtsi file. So let's move every u-boot,dm-spl property present in imxrt1050-evk.dts to imxrt1050-evk-u-boot.dtsi file. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> --- arch/arm/dts/imxrt1050-evk-u-boot.dtsi | 38 ++++++++++++++++++++++++++ arch/arm/dts/imxrt1050.dtsi | 13 --------- 2 files changed, 38 insertions(+), 13 deletions(-)