@@ -8,11 +8,6 @@ choice
prompt "Target select"
optional
-config TARGET_MPC8315ERDB
- bool "Support MPC8315ERDB"
- select ARCH_MPC8315
- select BOARD_EARLY_INIT_F
-
config TARGET_MPC8323ERDB
bool "Support MPC8323ERDB"
select ARCH_MPC832X
@@ -175,14 +170,6 @@ config ARCH_MPC8313
select MPC83XX_SECOND_I2C_SUPPORT
select FSL_ELBC
-config ARCH_MPC8315
- bool
- select ARCH_MPC831X
- select MPC83XX_PCIE1_SUPPORT
- select MPC83XX_PCIE2_SUPPORT
- select MPC83XX_SATA_SUPPORT
- select FSL_ELBC
-
config ARCH_MPC832X
bool
select MPC83XX_QUICC_ENGINE
@@ -265,7 +252,6 @@ endmenu
config FSL_ELBC
bool
-source "board/freescale/mpc8315erdb/Kconfig"
source "board/freescale/mpc8323erdb/Kconfig"
source "board/freescale/mpc832xemds/Kconfig"
source "board/freescale/mpc8349emds/Kconfig"
@@ -19,7 +19,7 @@ config DDR_MC_CLOCK_MODE_1_2
bool "1 : 2"
config DDR_MC_CLOCK_MODE_1_1
- depends on ARCH_MPC8315 || ARCH_MPC8349 || ARCH_MPC8360 || ARCH_MPC837X
+ depends on ARCH_MPC8349 || ARCH_MPC8360 || ARCH_MPC837X
bool "1 : 1"
endchoice
@@ -143,7 +143,6 @@ config CORE_PLL_VCO_DIVIDER_4
bool "4"
config CORE_PLL_VCO_DIVIDER_8
- depends on !ARCH_MPC8315
bool "8"
endchoice
@@ -104,9 +104,6 @@ int get_clocks(void)
#if !defined(CONFIG_ARCH_MPC832X)
u32 i2c2_clk;
#endif
-#if defined(CONFIG_ARCH_MPC8315)
- u32 tdm_clk;
-#endif
#if defined(CONFIG_FSL_ESDHC)
u32 sdhc_clk;
#endif
@@ -130,7 +127,7 @@ int get_clocks(void)
u32 pciexp1_clk;
u32 pciexp2_clk;
#endif
-#if defined(CONFIG_ARCH_MPC837X) || defined(CONFIG_ARCH_MPC8315)
+#if defined(CONFIG_ARCH_MPC837X)
u32 sata_clk;
#endif
@@ -200,8 +197,8 @@ int get_clocks(void)
}
#endif
-#if defined(CONFIG_ARCH_MPC8308) || defined(CONFIG_ARCH_MPC8315) || \
- defined(CONFIG_ARCH_MPC834X) || defined(CONFIG_ARCH_MPC837X)
+#if defined(CONFIG_ARCH_MPC8308) || defined(CONFIG_ARCH_MPC834X) || \
+ defined(CONFIG_ARCH_MPC837X)
switch ((sccr & SCCR_TSEC2CM) >> SCCR_TSEC2CM_SHIFT) {
case 0:
tsec2_clk = 0;
@@ -294,25 +291,6 @@ int get_clocks(void)
return -8;
}
#endif
-#if defined(CONFIG_ARCH_MPC8315)
- switch ((sccr & SCCR_TDMCM) >> SCCR_TDMCM_SHIFT) {
- case 0:
- tdm_clk = 0;
- break;
- case 1:
- tdm_clk = csb_clk;
- break;
- case 2:
- tdm_clk = csb_clk / 2;
- break;
- case 3:
- tdm_clk = csb_clk / 3;
- break;
- default:
- /* unknown SCCR_TDMCM value */
- return -8;
- }
-#endif
#if defined(CONFIG_ARCH_MPC834X)
i2c1_clk = tsec2_clk;
@@ -372,7 +350,7 @@ int get_clocks(void)
}
#endif
-#if defined(CONFIG_ARCH_MPC837X) || defined(CONFIG_ARCH_MPC8315)
+#if defined(CONFIG_ARCH_MPC837X)
switch ((sccr & SCCR_SATA1CM) >> SCCR_SATA1CM_SHIFT) {
case 0:
sata_clk = 0;
@@ -462,9 +440,6 @@ int get_clocks(void)
#if defined(CONFIG_ARCH_MPC834X)
gd->arch.usbmph_clk = usbmph_clk;
#endif
-#if defined(CONFIG_ARCH_MPC8315)
- gd->arch.tdm_clk = tdm_clk;
-#endif
#if defined(CONFIG_FSL_ESDHC)
gd->arch.sdhc_clk = sdhc_clk;
#endif
@@ -491,7 +466,7 @@ int get_clocks(void)
gd->arch.pciexp1_clk = pciexp1_clk;
gd->arch.pciexp2_clk = pciexp2_clk;
#endif
-#if defined(CONFIG_ARCH_MPC837X) || defined(CONFIG_ARCH_MPC8315)
+#if defined(CONFIG_ARCH_MPC837X)
gd->arch.sata_clk = sata_clk;
#endif
gd->pci_clk = pci_sync_in;
@@ -559,10 +534,6 @@ static int do_clocks(struct cmd_tbl *cmdtp, int flag, int argc,
printf(" I2C2: %-4s MHz\n",
strmhz(buf, gd->arch.i2c2_clk));
#endif
-#if defined(CONFIG_ARCH_MPC8315)
- printf(" TDM: %-4s MHz\n",
- strmhz(buf, gd->arch.tdm_clk));
-#endif
#if defined(CONFIG_FSL_ESDHC)
printf(" SDHC: %-4s MHz\n",
strmhz(buf, gd->arch.sdhc_clk));
@@ -590,7 +561,7 @@ static int do_clocks(struct cmd_tbl *cmdtp, int flag, int argc,
printf(" PCIEXP2: %-4s MHz\n",
strmhz(buf, gd->arch.pciexp2_clk));
#endif
-#if defined(CONFIG_ARCH_MPC837X) || defined(CONFIG_ARCH_MPC8315)
+#if defined(CONFIG_ARCH_MPC837X)
printf(" SATA: %-4s MHz\n",
strmhz(buf, gd->arch.sata_clk));
#endif
@@ -6,8 +6,7 @@
/*
* The MCP83xx's 1-2 GPIO controllers each with 32 bits.
*/
-#if defined(CONFIG_ARCH_MPC8313) || defined(CONFIG_ARCH_MPC8308) || \
- defined(CONFIG_ARCH_MPC8315)
+#if defined(CONFIG_ARCH_MPC8313) || defined(CONFIG_ARCH_MPC8308)
#define MPC83XX_GPIO_CTRLRS 1
#elif defined(CONFIG_ARCH_MPC834X) || defined(CONFIG_ARCH_MPC837X) || \
defined(CONFIG_ARCH_MPC8309)
@@ -45,9 +45,6 @@ struct arch_global_data {
# if defined(CONFIG_ARCH_MPC834X)
u32 usbmph_clk;
# endif /* CONFIG_ARCH_MPC834X */
-# if defined(CONFIG_ARCH_MPC8315)
- u32 tdm_clk;
-# endif
u32 core_clk;
u32 enc_clk;
u32 lbiu_clk;
@@ -57,7 +54,7 @@ struct arch_global_data {
u32 pciexp1_clk;
u32 pciexp2_clk;
# endif
-# if defined(CONFIG_ARCH_MPC837X) || defined(CONFIG_ARCH_MPC8315)
+# if defined(CONFIG_ARCH_MPC837X)
u32 sata_clk;
# endif
# if defined(CONFIG_ARCH_MPC8360)
@@ -714,51 +714,6 @@ typedef struct immap {
u8 res7[0xC0000];
} immap_t;
-#elif defined(CONFIG_ARCH_MPC8315)
-typedef struct immap {
- sysconf83xx_t sysconf; /* System configuration */
- wdt83xx_t wdt; /* Watch Dog Timer (WDT) Registers */
- rtclk83xx_t rtc; /* Real Time Clock Module Registers */
- rtclk83xx_t pit; /* Periodic Interval Timer */
- gtm83xx_t gtm[2]; /* Global Timers Module */
- ipic83xx_t ipic; /* Integrated Programmable Interrupt Controller */
- arbiter83xx_t arbiter; /* System Arbiter Registers */
- reset83xx_t reset; /* Reset Module */
- clk83xx_t clk; /* System Clock Module */
- pmc83xx_t pmc; /* Power Management Control Module */
- gpio83xx_t gpio[1]; /* General purpose I/O module */
- u8 res0[0x1300];
- ddr83xx_t ddr; /* DDR Memory Controller Memory */
- fsl_i2c_t i2c[1]; /* I2C Controllers */
- u8 res1[0x1400];
- duart83xx_t duart[2]; /* DUART */
- u8 res2[0x900];
- fsl_lbc_t im_lbc; /* Local Bus Controller Regs */
- u8 res3[0x1000];
- spi8xxx_t spi; /* Serial Peripheral Interface */
- dma83xx_t dma; /* DMA */
- pciconf83xx_t pci_conf[1]; /* PCI Software Configuration Registers */
- u8 res4[0x80];
- ios83xx_t ios; /* Sequencer */
- pcictrl83xx_t pci_ctrl[1]; /* PCI Controller Control and Status Registers */
- u8 res5[0xa00];
- pex83xx_t pciexp[2]; /* PCI Express Controller */
- u8 res6[0xb000];
- tdm83xx_t tdm; /* TDM Controller */
- u8 res7[0x1e00];
- sata83xx_t sata[2]; /* SATA Controller */
- u8 res8[0x9000];
- usb83xx_t usb[1]; /* USB DR Controller */
- tsec83xx_t tsec[2];
- u8 res9[0x6000];
- tdmdmac83xx_t tdmdmac; /* TDM DMAC */
- u8 res10[0x2000];
- security83xx_t security;
- u8 res11[0xA3000];
- serdes83xx_t serdes[1]; /* SerDes Registers */
- u8 res12[0x1CF00];
-} immap_t;
-
#elif defined(CONFIG_ARCH_MPC8308)
typedef struct immap {
sysconf83xx_t sysconf; /* System configuration */
@@ -13,7 +13,6 @@
#if defined(CONFIG_ARCH_MPC8308) || \
defined(CONFIG_ARCH_MPC8309) || \
defined(CONFIG_ARCH_MPC8313) || \
- defined(CONFIG_ARCH_MPC8315) || \
defined(CONFIG_ARCH_MPC834X) || \
defined(CONFIG_ARCH_MPC837X)
deleted file mode 100644
@@ -1,12 +0,0 @@
-if TARGET_MPC8315ERDB
-
-config SYS_BOARD
- default "mpc8315erdb"
-
-config SYS_VENDOR
- default "freescale"
-
-config SYS_CONFIG_NAME
- default "MPC8315ERDB"
-
-endif
deleted file mode 100644
@@ -1,7 +0,0 @@
-MPC8315ERDB BOARD
-#M: Dave Liu <daveliu@freescale.com>
-S: Orphan (since 2018-05)
-F: board/freescale/mpc8315erdb/
-F: include/configs/MPC8315ERDB.h
-F: configs/MPC8315ERDB_defconfig
-F: configs/MPC8315ERDB_NANDSPL_defconfig
deleted file mode 100644
@@ -1,6 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# (C) Copyright 2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-
-obj-y := mpc8315erdb.o sdram.o
deleted file mode 100644
@@ -1,105 +0,0 @@
-Freescale MPC8315ERDB Board
------------------------------------------
-
-1. Board Switches and Jumpers
-
- S3 is used to set CONFIG_SYS_RESET_SOURCE.
-
- To boot the image at 0xFE000000 in NOR flash, use these DIP
- switch settings for S3 S4:
-
- +------+ +------+
- | | | **** |
- | **** | | |
- +------+ ON +------+ ON
- 4321 4321
- (where the '*' indicates the position of the tab of the switch.)
-
- To boot the image at the beginning of NAND flash, use these
- DIP switch settings for S3 S4:
-
- +------+ +------+
- | * | | *** |
- | *** | | * |
- +------+ ON +------+ ON
- 4321 4321
- (where the '*' indicates the position of the tab of the switch.)
-
- When booting from NAND, use u-boot-nand.bin, not u-boot.bin.
-
-2. Memory Map
- The memory map looks like this:
-
- 0x0000_0000 0x07ff_ffff DDR 128M
- 0x8000_0000 0x8fff_ffff PCI MEM 256M
- 0x9000_0000 0x9fff_ffff PCI_MMIO 256M
- 0xe000_0000 0xe00f_ffff IMMR 1M
- 0xe030_0000 0xe03f_ffff PCI IO 1M
- 0xe060_0000 0xe060_7fff NAND FLASH (CS1) 32K
- 0xfe00_0000 0xfe7f_ffff NOR FLASH (CS0) 8M
-
- When booting from NAND, NAND flash is CS0 and NOR flash
- is CS1.
-
-3. Definitions
-
-3.1 Explanation of NEW definitions in:
-
- include/configs/MPC8315ERDB.h
-
- CONFIG_MPC83xx MPC83xx family
- CONFIG_MPC831x MPC831x specific
- CONFIG_MPC8315 MPC8315 specific
- CONFIG_MPC8315ERDB MPC8315ERDB board specific
-
-4. Compilation
-
- Assuming you're using BASH (or similar) as your shell:
-
- export CROSS_COMPILE=your-cross-compiler-prefix-
- make distclean
- make MPC8315ERDB_config (or MPC8315ERDB_NAND_config for u-boot-nand.bin)
- make all
-
-5. Downloading and Flashing Images
-
-5.1 Reflash U-Boot Image using U-Boot
-
- NOR flash:
-
- tftp 40000 u-boot.bin
- protect off all
- erase fe000000 fe1fffff
-
- cp.b 40000 fe000000 xxxx
- protect on all
-
- You have to supply the correct byte count with 'xxxx'
- from the TFTP result log.
-
- NAND flash:
-
- =>tftpboot $loadaddr <filename>
- =>nand erase 0 0x80000
- =>nand write $loadaddr 0 0x80000
-
- ...where 0x80000 is the filesize rounded up to
- the next 0x20000 increment.
-
-5.2 Downloading and Booting Linux Kernel
-
- Ensure that all networking-related environment variables are set
- properly (including ipaddr, serverip, gatewayip (if needed),
- netmask, ethaddr, eth1addr, rootpath (if using NFS root),
- fdtfile, and bootfile).
-
- Then, do one of the following, depending on whether you
- want an NFS root or a ramdisk root:
-
- =>run nfsboot
- or
- =>run ramboot
-
-6 Notes
-
- The console baudrate for MPC8315ERDB is 115200bps.
deleted file mode 100644
@@ -1,249 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2007 Freescale Semiconductor, Inc.
- *
- * Author: Scott Wood <scottwood@freescale.com>
- * Dave Liu <daveliu@freescale.com>
- */
-
-#include <common.h>
-#include <hwconfig.h>
-#include <i2c.h>
-#include <init.h>
-#include <net.h>
-#include <asm/global_data.h>
-#include <linux/delay.h>
-#include <linux/libfdt.h>
-#include <fdt_support.h>
-#include <pci.h>
-#include <mpc83xx.h>
-#include <netdev.h>
-#include <asm/io.h>
-#include <ns16550.h>
-#include <nand.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int board_early_init_f(void)
-{
- volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
-
- if (im->pmc.pmccr1 & PMCCR1_POWER_OFF)
- gd->flags |= GD_FLG_SILENT;
-
- return 0;
-}
-
-#ifndef CONFIG_NAND_SPL
-
-static u8 read_board_info(void)
-{
- u8 val8;
- i2c_set_bus_num(0);
-
- if (i2c_read(CONFIG_SYS_I2C_PCF8574A_ADDR, 0, 0, &val8, 1) == 0)
- return val8;
- else
- return 0;
-}
-
-int checkboard(void)
-{
- static const char * const rev_str[] = {
- "0.0",
- "0.1",
- "1.0",
- "1.1",
- "<unknown>",
- };
- u8 info;
- int i;
-
- info = read_board_info();
- i = (!info) ? 4: info & 0x03;
-
- printf("Board: Freescale MPC8315ERDB Rev %s\n", rev_str[i]);
-
- return 0;
-}
-
-static struct pci_region pci_regions[] = {
- {
- bus_start: CONFIG_SYS_PCI_MEM_BASE,
- phys_start: CONFIG_SYS_PCI_MEM_PHYS,
- size: CONFIG_SYS_PCI_MEM_SIZE,
- flags: PCI_REGION_MEM | PCI_REGION_PREFETCH
- },
- {
- bus_start: CONFIG_SYS_PCI_MMIO_BASE,
- phys_start: CONFIG_SYS_PCI_MMIO_PHYS,
- size: CONFIG_SYS_PCI_MMIO_SIZE,
- flags: PCI_REGION_MEM
- },
- {
- bus_start: CONFIG_SYS_PCI_IO_BASE,
- phys_start: CONFIG_SYS_PCI_IO_PHYS,
- size: CONFIG_SYS_PCI_IO_SIZE,
- flags: PCI_REGION_IO
- }
-};
-
-static struct pci_region pcie_regions_0[] = {
- {
- .bus_start = CONFIG_SYS_PCIE1_MEM_BASE,
- .phys_start = CONFIG_SYS_PCIE1_MEM_PHYS,
- .size = CONFIG_SYS_PCIE1_MEM_SIZE,
- .flags = PCI_REGION_MEM,
- },
- {
- .bus_start = CONFIG_SYS_PCIE1_IO_BASE,
- .phys_start = CONFIG_SYS_PCIE1_IO_PHYS,
- .size = CONFIG_SYS_PCIE1_IO_SIZE,
- .flags = PCI_REGION_IO,
- },
-};
-
-static struct pci_region pcie_regions_1[] = {
- {
- .bus_start = CONFIG_SYS_PCIE2_MEM_BASE,
- .phys_start = CONFIG_SYS_PCIE2_MEM_PHYS,
- .size = CONFIG_SYS_PCIE2_MEM_SIZE,
- .flags = PCI_REGION_MEM,
- },
- {
- .bus_start = CONFIG_SYS_PCIE2_IO_BASE,
- .phys_start = CONFIG_SYS_PCIE2_IO_PHYS,
- .size = CONFIG_SYS_PCIE2_IO_SIZE,
- .flags = PCI_REGION_IO,
- },
-};
-
-void pci_init_board(void)
-{
- volatile immap_t *immr = (volatile immap_t *)CONFIG_SYS_IMMR;
- volatile sysconf83xx_t *sysconf = &immr->sysconf;
- volatile clk83xx_t *clk = (volatile clk83xx_t *)&immr->clk;
- volatile law83xx_t *pci_law = immr->sysconf.pcilaw;
- volatile law83xx_t *pcie_law = sysconf->pcielaw;
- struct pci_region *reg[] = { pci_regions };
- struct pci_region *pcie_reg[] = { pcie_regions_0, pcie_regions_1, };
-
- /* Enable all 3 PCI_CLK_OUTPUTs. */
- clk->occr |= 0xe0000000;
-
- /*
- * Configure PCI Local Access Windows
- */
- pci_law[0].bar = CONFIG_SYS_PCI_MEM_PHYS & LAWBAR_BAR;
- pci_law[0].ar = LBLAWAR_EN | LBLAWAR_512MB;
-
- pci_law[1].bar = CONFIG_SYS_PCI_IO_PHYS & LAWBAR_BAR;
- pci_law[1].ar = LBLAWAR_EN | LBLAWAR_1MB;
-
- mpc83xx_pci_init(1, reg);
-
- /* Configure the clock for PCIE controller */
- clrsetbits_be32(&clk->sccr, SCCR_PCIEXP1CM | SCCR_PCIEXP2CM,
- SCCR_PCIEXP1CM_1 | SCCR_PCIEXP2CM_1);
-
- /* Deassert the resets in the control register */
- out_be32(&sysconf->pecr1, 0xE0008000);
- out_be32(&sysconf->pecr2, 0xE0008000);
- udelay(2000);
-
- /* Configure PCI Express Local Access Windows */
- out_be32(&pcie_law[0].bar, CONFIG_SYS_PCIE1_BASE & LAWBAR_BAR);
- out_be32(&pcie_law[0].ar, LBLAWAR_EN | LBLAWAR_512MB);
-
- out_be32(&pcie_law[1].bar, CONFIG_SYS_PCIE2_BASE & LAWBAR_BAR);
- out_be32(&pcie_law[1].ar, LBLAWAR_EN | LBLAWAR_512MB);
-
- mpc83xx_pcie_init(2, pcie_reg);
-}
-
-#if defined(CONFIG_OF_BOARD_SETUP)
-void fdt_tsec1_fixup(void *fdt, struct bd_info *bd)
-{
- const char disabled[] = "disabled";
- const char *path;
- int ret;
-
- if (hwconfig_arg_cmp("board_type", "tsec1")) {
- return;
- } else if (!hwconfig_arg_cmp("board_type", "ulpi")) {
- printf("NOTICE: No or unknown board_type hwconfig specified.\n"
- " Assuming board with TSEC1.\n");
- return;
- }
-
- ret = fdt_path_offset(fdt, "/aliases");
- if (ret < 0) {
- printf("WARNING: can't find /aliases node\n");
- return;
- }
-
- path = fdt_getprop(fdt, ret, "ethernet0", NULL);
- if (!path) {
- printf("WARNING: can't find ethernet0 alias\n");
- return;
- }
-
- do_fixup_by_path(fdt, path, "status", disabled, sizeof(disabled), 1);
-}
-
-int ft_board_setup(void *blob, struct bd_info *bd)
-{
- ft_cpu_setup(blob, bd);
-#ifdef CONFIG_PCI
- ft_pci_setup(blob, bd);
-#endif
- fsl_fdt_fixup_dr_usb(blob, bd);
- fdt_tsec1_fixup(blob, bd);
-
- return 0;
-}
-#endif
-
-int board_eth_init(struct bd_info *bis)
-{
- cpu_eth_init(bis); /* Initialize TSECs first */
- return pci_eth_init(bis);
-}
-
-#else /* CONFIG_NAND_SPL */
-
-int checkboard(void)
-{
- puts("Board: Freescale MPC8315ERDB\n");
- return 0;
-}
-
-void board_init_f(ulong bootflag)
-{
- board_early_init_f();
- ns16550_init((struct ns16550 *)(CONFIG_SYS_IMMR + 0x4500),
- CONFIG_SYS_NS16550_CLK / 16 / CONFIG_BAUDRATE);
- puts("NAND boot... ");
- timer_init();
- dram_init();
- relocate_code(CONFIG_SYS_NAND_U_BOOT_RELOC + 0x10000, (gd_t *)gd,
- CONFIG_SYS_NAND_U_BOOT_RELOC);
-}
-
-void board_init_r(gd_t *gd, ulong dest_addr)
-{
- nand_boot();
-}
-
-void putc(char c)
-{
- if (gd->flags & GD_FLG_SILENT)
- return;
-
- if (c == '\n')
- ns16550_putc((struct ns16550 *)(CONFIG_SYS_IMMR + 0x4500), '\r');
-
- ns16550_putc((struct ns16550 *)(CONFIG_SYS_IMMR + 0x4500), c);
-}
-
-#endif /* CONFIG_NAND_SPL */
deleted file mode 100644
@@ -1,115 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2007 Freescale Semiconductor, Inc.
- *
- * Authors: Nick.Spence@freescale.com
- * Wilson.Lo@freescale.com
- * scottwood@freescale.com
- */
-
-#include <common.h>
-#include <init.h>
-#include <mpc83xx.h>
-#include <spd_sdram.h>
-#include <asm/global_data.h>
-#include <linux/delay.h>
-
-#include <asm/bitops.h>
-#include <asm/io.h>
-
-#include <asm/processor.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static void resume_from_sleep(void)
-{
- u32 magic = *(u32 *)0;
-
- typedef void (*func_t)(void);
- func_t resume = *(func_t *)4;
-
- if (magic == 0xf5153ae5)
- resume();
-
- gd->flags &= ~GD_FLG_SILENT;
- puts("\nResume from sleep failed: bad magic word\n");
-}
-
-/* Fixed sdram init -- doesn't use serial presence detect.
- *
- * This is useful for faster booting in configs where the RAM is unlikely
- * to be changed, or for things like NAND booting where space is tight.
- */
-#ifndef CONFIG_SYS_RAMBOOT
-static long fixed_sdram(void)
-{
- volatile immap_t *im = (volatile immap_t *)CONFIG_SYS_IMMR;
- u32 msize = CONFIG_SYS_DDR_SIZE * 1024 * 1024;
- u32 msize_log2 = __ilog2(msize);
-
- im->sysconf.ddrlaw[0].bar = CONFIG_SYS_SDRAM_BASE & 0xfffff000;
- im->sysconf.ddrlaw[0].ar = LBLAWAR_EN | (msize_log2 - 1);
- im->sysconf.ddrcdr = CONFIG_SYS_DDRCDR_VALUE;
-
- /*
- * Erratum DDR3 requires a 50ms delay after clearing DDRCDR[DDR_cfg],
- * or the DDR2 controller may fail to initialize correctly.
- */
- __udelay(50000);
-
- im->ddr.csbnds[0].csbnds = (msize - 1) >> 24;
- im->ddr.cs_config[0] = CONFIG_SYS_DDR_CS0_CONFIG;
-
- /* Currently we use only one CS, so disable the other bank. */
- im->ddr.cs_config[1] = 0;
-
- im->ddr.sdram_clk_cntl = CONFIG_SYS_DDR_SDRAM_CLK_CNTL;
- im->ddr.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3;
- im->ddr.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
- im->ddr.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
- im->ddr.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0;
-
- if (im->pmc.pmccr1 & PMCCR1_POWER_OFF)
- im->ddr.sdram_cfg = CONFIG_SYS_DDR_SDRAM_CFG | SDRAM_CFG_BI;
- else
- im->ddr.sdram_cfg = CONFIG_SYS_DDR_SDRAM_CFG;
-
- im->ddr.sdram_cfg2 = CONFIG_SYS_DDR_SDRAM_CFG2;
- im->ddr.sdram_mode = CONFIG_SYS_DDR_MODE;
- im->ddr.sdram_mode2 = CONFIG_SYS_DDR_MODE2;
-
- im->ddr.sdram_interval = CONFIG_SYS_DDR_INTERVAL;
- sync();
-
- /* enable DDR controller */
- im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN;
- sync();
-
- return msize;
-}
-#else
-static long fixed_sdram(void)
-{
- return CONFIG_SYS_DDR_SIZE * 1024 * 1024;
-}
-#endif /* CONFIG_SYS_RAMBOOT */
-
-int dram_init(void)
-{
- volatile immap_t *im = (volatile immap_t *)CONFIG_SYS_IMMR;
- u32 msize;
-
- if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im)
- return -ENXIO;
-
- /* DDR SDRAM */
- msize = fixed_sdram();
-
- if (im->pmc.pmccr1 & PMCCR1_POWER_OFF)
- resume_from_sleep();
-
- /* set total bus SDRAM size(bytes) -- DDR */
- gd->ram_size = msize;
-
- return 0;
-}
deleted file mode 100644
@@ -1,156 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0xFE000000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_SECT_SIZE=0x10000
-CONFIG_SYS_CLK_FREQ=66666667
-CONFIG_MPC83xx=y
-CONFIG_HIGH_BATS=y
-CONFIG_TARGET_MPC8315ERDB=y
-CONFIG_SYSTEM_PLL_VCO_DIV_2=y
-CONFIG_CORE_PLL_RATIO_3_1=y
-CONFIG_PCI_HOST_MODE_ENABLE=y
-CONFIG_PCI_INT_ARBITER1_ENABLE=y
-CONFIG_BOOT_MEMORY_SPACE_LOW=y
-CONFIG_BOOT_ROM_INTERFACE_GPCM_16BIT=y
-CONFIG_TSEC1_MODE_RGMII=y
-CONFIG_TSEC2_MODE_RGMII=y
-CONFIG_BAT0=y
-CONFIG_BAT0_NAME="SDRAM"
-CONFIG_BAT0_BASE=0x00000000
-CONFIG_BAT0_LENGTH_128_MBYTES=y
-CONFIG_BAT0_ACCESS_RW=y
-CONFIG_BAT0_ICACHE_MEMORYCOHERENCE=y
-CONFIG_BAT0_DCACHE_MEMORYCOHERENCE=y
-CONFIG_BAT0_USER_MODE_VALID=y
-CONFIG_BAT0_SUPERVISOR_MODE_VALID=y
-CONFIG_BAT1=y
-CONFIG_BAT1_NAME="IMMRBAR"
-CONFIG_BAT1_BASE=0xE0000000
-CONFIG_BAT1_LENGTH_8_MBYTES=y
-CONFIG_BAT1_ACCESS_RW=y
-CONFIG_BAT1_ICACHE_INHIBITED=y
-CONFIG_BAT1_ICACHE_GUARDED=y
-CONFIG_BAT1_DCACHE_INHIBITED=y
-CONFIG_BAT1_DCACHE_GUARDED=y
-CONFIG_BAT1_USER_MODE_VALID=y
-CONFIG_BAT1_SUPERVISOR_MODE_VALID=y
-CONFIG_BAT2=y
-CONFIG_BAT2_NAME="FLASH"
-CONFIG_BAT2_BASE=0xFE000000
-CONFIG_BAT2_LENGTH_32_MBYTES=y
-CONFIG_BAT2_ACCESS_RW=y
-CONFIG_BAT2_ICACHE_MEMORYCOHERENCE=y
-CONFIG_BAT2_DCACHE_INHIBITED=y
-CONFIG_BAT2_DCACHE_GUARDED=y
-CONFIG_BAT2_USER_MODE_VALID=y
-CONFIG_BAT2_SUPERVISOR_MODE_VALID=y
-CONFIG_BAT3=y
-CONFIG_BAT3_NAME="STACK_IN_DCACHE"
-CONFIG_BAT3_BASE=0xE6000000
-CONFIG_BAT3_ACCESS_RW=y
-CONFIG_BAT3_USER_MODE_VALID=y
-CONFIG_BAT3_SUPERVISOR_MODE_VALID=y
-CONFIG_BAT4=y
-CONFIG_BAT4_NAME="PCI_MEM_PHYS"
-CONFIG_BAT4_BASE=0x80000000
-CONFIG_BAT4_LENGTH_256_MBYTES=y
-CONFIG_BAT4_ACCESS_RW=y
-CONFIG_BAT4_ICACHE_MEMORYCOHERENCE=y
-CONFIG_BAT4_DCACHE_MEMORYCOHERENCE=y
-CONFIG_BAT4_USER_MODE_VALID=y
-CONFIG_BAT4_SUPERVISOR_MODE_VALID=y
-CONFIG_BAT5=y
-CONFIG_BAT5_NAME="PCI_MMIO_PHYS"
-CONFIG_BAT5_BASE=0x90000000
-CONFIG_BAT5_LENGTH_256_MBYTES=y
-CONFIG_BAT5_ACCESS_RW=y
-CONFIG_BAT5_ICACHE_INHIBITED=y
-CONFIG_BAT5_ICACHE_GUARDED=y
-CONFIG_BAT5_DCACHE_INHIBITED=y
-CONFIG_BAT5_DCACHE_GUARDED=y
-CONFIG_BAT5_USER_MODE_VALID=y
-CONFIG_BAT5_SUPERVISOR_MODE_VALID=y
-CONFIG_LBLAW0=y
-CONFIG_LBLAW0_BASE=0xFE000000
-CONFIG_LBLAW0_NAME="FLASH"
-CONFIG_LBLAW0_LENGTH_8_MBYTES=y
-CONFIG_LBLAW1=y
-CONFIG_LBLAW1_BASE=0xE0600000
-CONFIG_LBLAW1_NAME="NAND"
-CONFIG_LBLAW1_LENGTH_32_KBYTES=y
-CONFIG_ELBC_BR0_OR0=y
-CONFIG_BR0_OR0_NAME="FLASH"
-CONFIG_BR0_OR0_BASE=0xFE000000
-CONFIG_BR0_PORTSIZE_16BIT=y
-CONFIG_OR0_AM_8_MBYTES=y
-CONFIG_OR0_XAM_SET=y
-CONFIG_OR0_SCY_15=y
-CONFIG_OR0_CSNT_EARLIER=y
-CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y
-CONFIG_OR0_XACS_EXTENDED=y
-CONFIG_OR0_TRLX_RELAXED=y
-CONFIG_OR0_EHTR_8_CYCLE=y
-CONFIG_OR0_EAD_EXTRA=y
-CONFIG_ELBC_BR1_OR1=y
-CONFIG_BR1_OR1_NAME="NAND"
-CONFIG_BR1_OR1_BASE=0xE0600000
-CONFIG_BR1_ERRORCHECKING_BOTH=y
-CONFIG_BR1_MACHINE_FCM=y
-CONFIG_OR1_SCY_1=y
-CONFIG_OR1_CSCT_8_CYCLE=y
-CONFIG_OR1_CST_ONE_CLOCK=y
-CONFIG_OR1_CHT_TWO_CLOCK=y
-CONFIG_OR1_TRLX_RELAXED=y
-CONFIG_OR1_EHTR_8_CYCLE=y
-CONFIG_HID0_FINAL_EMCP=y
-CONFIG_HID0_FINAL_DPM=y
-CONFIG_HID0_FINAL_ICE=y
-CONFIG_HID2_HBE=y
-CONFIG_ACR_PIPE_DEP_4=y
-CONFIG_ACR_RPTCNT_4=y
-CONFIG_SPCR_TSECEP_3=y
-CONFIG_LCRR_CLKDIV_2=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_BOOTDELAY=6
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_NAND=y
-CONFIG_CMD_PCI=y
-CONFIG_CMD_USB=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_DATE=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_MTDPARTS=y
-CONFIG_MTDIDS_DEFAULT="nand0=e0600000.flash"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=e0600000.flash:512k(uboot),128k(env),6m@1m(kernel),-(fs)"
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_ADDR=0xFE080000
-# CONFIG_MMC is not set
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_PROTECTION=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_PHY_ATHEROS=y
-CONFIG_PHY_BROADCOM=y
-CONFIG_PHY_DAVICOM=y
-CONFIG_PHY_LXT=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_SMSC=y
-CONFIG_PHY_VITESSE=y
-CONFIG_EEPRO100=y
-CONFIG_MII=y
-CONFIG_TSEC_ENET=y
-CONFIG_SYS_NS16550=y
-CONFIG_USB=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_OF_LIBFDT=y
deleted file mode 100644
@@ -1,370 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2007-2010 Freescale Semiconductor, Inc.
- *
- * Dave Liu <daveliu@freescale.com>
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define CONFIG_SYS_NAND_U_BOOT_SIZE (512 << 10)
-#define CONFIG_SYS_NAND_U_BOOT_DST 0x00100000
-#define CONFIG_SYS_NAND_U_BOOT_START 0x00100100
-#define CONFIG_SYS_NAND_U_BOOT_OFFS 16384
-#define CONFIG_SYS_NAND_U_BOOT_RELOC 0x00010000
-
-#ifndef CONFIG_SYS_MONITOR_BASE
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
-#endif
-
-/*
- * High Level Configuration Options
- */
-#define CONFIG_E300 1 /* E300 family */
-
-/*
- * System IO Config
- */
-#define CONFIG_SYS_SICRH 0x00000000
-#define CONFIG_SYS_SICRL 0x00000000 /* 3.3V, no delay */
-
-#define CONFIG_HWCONFIG
-
-/*
- * DDR Setup
- */
-#define CONFIG_SYS_SDRAM_BASE 0x00000000 /* DDR is system memory */
-#define CONFIG_SYS_DDR_SDRAM_CLK_CNTL DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05
-#define CONFIG_SYS_DDRCDR_VALUE (DDRCDR_EN \
- | DDRCDR_PZ_LOZ \
- | DDRCDR_NZ_LOZ \
- | DDRCDR_ODT \
- | DDRCDR_Q_DRN)
- /* 0x7b880001 */
-/*
- * Manually set up DDR parameters
- * consist of two chips HY5PS12621BFP-C4 from HYNIX
- */
-#define CONFIG_SYS_DDR_SIZE 128 /* MB */
-#define CONFIG_SYS_DDR_CS0_BNDS 0x00000007
-#define CONFIG_SYS_DDR_CS0_CONFIG (CSCONFIG_EN \
- | CSCONFIG_ODT_RD_NEVER \
- | CSCONFIG_ODT_WR_ONLY_CURRENT \
- | CSCONFIG_ROW_BIT_13 \
- | CSCONFIG_COL_BIT_10)
- /* 0x80010102 */
-#define CONFIG_SYS_DDR_TIMING_3 0x00000000
-#define CONFIG_SYS_DDR_TIMING_0 ((0 << TIMING_CFG0_RWT_SHIFT) \
- | (0 << TIMING_CFG0_WRT_SHIFT) \
- | (0 << TIMING_CFG0_RRT_SHIFT) \
- | (0 << TIMING_CFG0_WWT_SHIFT) \
- | (2 << TIMING_CFG0_ACT_PD_EXIT_SHIFT) \
- | (2 << TIMING_CFG0_PRE_PD_EXIT_SHIFT) \
- | (8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) \
- | (2 << TIMING_CFG0_MRS_CYC_SHIFT))
- /* 0x00220802 */
-#define CONFIG_SYS_DDR_TIMING_1 ((2 << TIMING_CFG1_PRETOACT_SHIFT) \
- | (7 << TIMING_CFG1_ACTTOPRE_SHIFT) \
- | (2 << TIMING_CFG1_ACTTORW_SHIFT) \
- | (5 << TIMING_CFG1_CASLAT_SHIFT) \
- | (6 << TIMING_CFG1_REFREC_SHIFT) \
- | (2 << TIMING_CFG1_WRREC_SHIFT) \
- | (2 << TIMING_CFG1_ACTTOACT_SHIFT) \
- | (2 << TIMING_CFG1_WRTORD_SHIFT))
- /* 0x27256222 */
-#define CONFIG_SYS_DDR_TIMING_2 ((1 << TIMING_CFG2_ADD_LAT_SHIFT) \
- | (4 << TIMING_CFG2_CPO_SHIFT) \
- | (2 << TIMING_CFG2_WR_LAT_DELAY_SHIFT) \
- | (2 << TIMING_CFG2_RD_TO_PRE_SHIFT) \
- | (2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT) \
- | (3 << TIMING_CFG2_CKE_PLS_SHIFT) \
- | (5 << TIMING_CFG2_FOUR_ACT_SHIFT))
- /* 0x121048c5 */
-#define CONFIG_SYS_DDR_INTERVAL ((0x0360 << SDRAM_INTERVAL_REFINT_SHIFT) \
- | (0x0100 << SDRAM_INTERVAL_BSTOPRE_SHIFT))
- /* 0x03600100 */
-#define CONFIG_SYS_DDR_SDRAM_CFG (SDRAM_CFG_SREN \
- | SDRAM_CFG_SDRAM_TYPE_DDR2 \
- | SDRAM_CFG_DBW_32)
- /* 0x43080000 */
-#define CONFIG_SYS_DDR_SDRAM_CFG2 0x00401000 /* 1 posted refresh */
-#define CONFIG_SYS_DDR_MODE ((0x0448 << SDRAM_MODE_ESD_SHIFT) \
- | (0x0232 << SDRAM_MODE_SD_SHIFT))
- /* ODT 150ohm CL=3, AL=1 on SDRAM */
-#define CONFIG_SYS_DDR_MODE2 0x00000000
-
-/*
- * Memory test
- */
-#undef CONFIG_SYS_DRAM_TEST /* memory test, takes time */
-
-/*
- * The reserved memory
- */
-#define CONFIG_SYS_MONITOR_LEN (512 * 1024) /* Reserve 512 kB for Mon */
-#define CONFIG_SYS_MALLOC_LEN (512 * 1024) /* Reserved for malloc */
-
-/*
- * Initial RAM Base Address Setup
- */
-#define CONFIG_SYS_INIT_RAM_LOCK 1
-#define CONFIG_SYS_INIT_RAM_ADDR 0xE6000000 /* Initial RAM address */
-#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in RAM */
-#define CONFIG_SYS_GBL_DATA_OFFSET \
- (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-
-/*
- * FLASH on the Local Bus
- */
-#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
-
-#define CONFIG_SYS_FLASH_BASE 0xFE000000 /* FLASH base address */
-#define CONFIG_SYS_FLASH_SIZE 8 /* FLASH size is 8M */
-
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */
-/* 127 64KB sectors and 8 8KB top sectors per device */
-#define CONFIG_SYS_MAX_FLASH_SECT 135
-
-#undef CONFIG_SYS_FLASH_CHECKSUM
-#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
-
-/*
- * NAND Flash on the Local Bus
- */
-
-#ifdef CONFIG_NAND_SPL
-#define CONFIG_SYS_NAND_BASE 0xFFF00000
-#else
-#define CONFIG_SYS_NAND_BASE 0xE0600000
-#endif
-
-#define CONFIG_MTD_PARTITION
-
-#define CONFIG_SYS_MAX_NAND_DEVICE 1
-#define CONFIG_NAND_FSL_ELBC 1
-#define CONFIG_SYS_NAND_BLOCK_SIZE 16384
-#define CONFIG_SYS_NAND_WINDOW_SIZE (32 * 1024) /* 0x00008000 */
-
-#define CONFIG_SYS_NAND_U_BOOT_SIZE (512 << 10)
-#define CONFIG_SYS_NAND_U_BOOT_DST 0x00100000
-#define CONFIG_SYS_NAND_U_BOOT_START 0x00100100
-#define CONFIG_SYS_NAND_U_BOOT_OFFS 16384
-#define CONFIG_SYS_NAND_U_BOOT_RELOC 0x00010000
-
-
-
-/* Still needed for spl_minimal.c */
-#define CONFIG_SYS_NAND_BR_PRELIM CONFIG_SYS_BR1_PRELIM
-#define CONFIG_SYS_NAND_OR_PRELIM CONFIG_SYS_OR1_PRELIM
-
-#if CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE && \
- !defined(CONFIG_NAND_SPL)
-#define CONFIG_SYS_RAMBOOT
-#else
-#undef CONFIG_SYS_RAMBOOT
-#endif
-
-/*
- * Serial Port
- */
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE 1
-#define CONFIG_SYS_NS16550_CLK (get_bus_freq(0))
-
-#define CONFIG_SYS_BAUDRATE_TABLE \
- {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
-
-#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR+0x4500)
-#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR+0x4600)
-
-/* I2C */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_FSL
-#define CONFIG_SYS_FSL_I2C_SPEED 400000
-#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F
-#define CONFIG_SYS_FSL_I2C_OFFSET 0x3000
-#define CONFIG_SYS_I2C_NOPROBES { {0, 0x51} }
-
-/*
- * Board info - revision and where boot from
- */
-#define CONFIG_SYS_I2C_PCF8574A_ADDR 0x39
-
-/*
- * Config on-board RTC
- */
-#define CONFIG_RTC_DS1337 /* ds1339 on board, use ds1337 rtc via i2c */
-#define CONFIG_SYS_I2C_RTC_ADDR 0x68 /* at address 0x68 */
-
-/*
- * General PCI
- * Addresses are mapped 1-1.
- */
-#define CONFIG_SYS_PCI_MEM_BASE 0x80000000
-#define CONFIG_SYS_PCI_MEM_PHYS CONFIG_SYS_PCI_MEM_BASE
-#define CONFIG_SYS_PCI_MEM_SIZE 0x10000000 /* 256M */
-#define CONFIG_SYS_PCI_MMIO_BASE 0x90000000
-#define CONFIG_SYS_PCI_MMIO_PHYS CONFIG_SYS_PCI_MMIO_BASE
-#define CONFIG_SYS_PCI_MMIO_SIZE 0x10000000 /* 256M */
-#define CONFIG_SYS_PCI_IO_BASE 0x00000000
-#define CONFIG_SYS_PCI_IO_PHYS 0xE0300000
-#define CONFIG_SYS_PCI_IO_SIZE 0x100000 /* 1M */
-
-#define CONFIG_SYS_PCI_SLV_MEM_LOCAL CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_PCI_SLV_MEM_BUS 0x00000000
-#define CONFIG_SYS_PCI_SLV_MEM_SIZE 0x80000000
-
-#define CONFIG_SYS_PCIE1_BASE 0xA0000000
-#define CONFIG_SYS_PCIE1_MEM_BASE 0xA0000000
-#define CONFIG_SYS_PCIE1_MEM_PHYS 0xA0000000
-#define CONFIG_SYS_PCIE1_MEM_SIZE 0x10000000
-#define CONFIG_SYS_PCIE1_CFG_BASE 0xB0000000
-#define CONFIG_SYS_PCIE1_CFG_SIZE 0x01000000
-#define CONFIG_SYS_PCIE1_IO_BASE 0x00000000
-#define CONFIG_SYS_PCIE1_IO_PHYS 0xB1000000
-#define CONFIG_SYS_PCIE1_IO_SIZE 0x00800000
-
-#define CONFIG_SYS_PCIE2_BASE 0xC0000000
-#define CONFIG_SYS_PCIE2_MEM_BASE 0xC0000000
-#define CONFIG_SYS_PCIE2_MEM_PHYS 0xC0000000
-#define CONFIG_SYS_PCIE2_MEM_SIZE 0x10000000
-#define CONFIG_SYS_PCIE2_CFG_BASE 0xD0000000
-#define CONFIG_SYS_PCIE2_CFG_SIZE 0x01000000
-#define CONFIG_SYS_PCIE2_IO_BASE 0x00000000
-#define CONFIG_SYS_PCIE2_IO_PHYS 0xD1000000
-#define CONFIG_SYS_PCIE2_IO_SIZE 0x00800000
-
-#define CONFIG_PCI_INDIRECT_BRIDGE
-#define CONFIG_PCIE
-
-#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
-#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1957 /* Freescale */
-
-#define CONFIG_HAS_FSL_DR_USB
-#define CONFIG_SYS_SCCR_USBDRCM 3
-
-#define CONFIG_USB_EHCI_FSL
-#define CONFIG_USB_PHY_TYPE "utmi"
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
-
-/*
- * TSEC
- */
-#define CONFIG_SYS_TSEC1_OFFSET 0x24000
-#define CONFIG_SYS_TSEC1 (CONFIG_SYS_IMMR+CONFIG_SYS_TSEC1_OFFSET)
-#define CONFIG_SYS_TSEC2_OFFSET 0x25000
-#define CONFIG_SYS_TSEC2 (CONFIG_SYS_IMMR+CONFIG_SYS_TSEC2_OFFSET)
-
-/*
- * TSEC ethernet configuration
- */
-#define CONFIG_TSEC1 1
-#define CONFIG_TSEC1_NAME "eTSEC0"
-#define CONFIG_TSEC2 1
-#define CONFIG_TSEC2_NAME "eTSEC1"
-#define TSEC1_PHY_ADDR 0
-#define TSEC2_PHY_ADDR 1
-#define TSEC1_PHYIDX 0
-#define TSEC2_PHYIDX 0
-#define TSEC1_FLAGS TSEC_GIGABIT
-#define TSEC2_FLAGS TSEC_GIGABIT
-
-/* Options are: eTSEC[0-1] */
-#define CONFIG_ETHPRIME "eTSEC1"
-
-/*
- * SATA
- */
-#define CONFIG_SYS_SATA_MAX_DEVICE 2
-#define CONFIG_SATA1
-#define CONFIG_SYS_SATA1_OFFSET 0x18000
-#define CONFIG_SYS_SATA1 (CONFIG_SYS_IMMR + CONFIG_SYS_SATA1_OFFSET)
-#define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA
-#define CONFIG_SATA2
-#define CONFIG_SYS_SATA2_OFFSET 0x19000
-#define CONFIG_SYS_SATA2 (CONFIG_SYS_IMMR + CONFIG_SYS_SATA2_OFFSET)
-#define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA
-
-#ifdef CONFIG_FSL_SATA
-#define CONFIG_LBA48
-#endif
-
-/*
- * Environment
- */
-
-#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
-#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-#undef CONFIG_WATCHDOG /* watchdog disabled */
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 256 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ (256 << 20) /* Initial Memory map for Linux */
-#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */
-
-/*
- * MMU Setup
- */
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */
-#endif
-
-/*
- * Environment Configuration
- */
-
-#if defined(CONFIG_TSEC_ENET)
-#define CONFIG_HAS_ETH0
-#define CONFIG_HAS_ETH1
-#endif
-
-#define CONFIG_LOADADDR 800000 /* default location for tftp and bootm */
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "netdev=eth0\0" \
- "consoledev=ttyS0\0" \
- "ramdiskaddr=1000000\0" \
- "ramdiskfile=ramfs.83xx\0" \
- "fdtaddr=780000\0" \
- "fdtfile=mpc8315erdb.dtb\0" \
- "usb_phy_type=utmi\0" \
- ""
-
-#define CONFIG_NFSBOOTCOMMAND \
- "setenv bootargs root=/dev/nfs rw " \
- "nfsroot=$serverip:$rootpath " \
- "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:" \
- "$netdev:off " \
- "console=$consoledev,$baudrate $othbootargs;" \
- "tftp $loadaddr $bootfile;" \
- "tftp $fdtaddr $fdtfile;" \
- "bootm $loadaddr - $fdtaddr"
-
-#define CONFIG_RAMBOOTCOMMAND \
- "setenv bootargs root=/dev/ram rw " \
- "console=$consoledev,$baudrate $othbootargs;" \
- "tftp $ramdiskaddr $ramdiskfile;" \
- "tftp $loadaddr $bootfile;" \
- "tftp $fdtaddr $fdtfile;" \
- "bootm $loadaddr $ramdiskaddr $fdtaddr"
-
-#define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND
-
-#endif /* __CONFIG_H */
@@ -243,41 +243,6 @@
#define SICRH_TSOBI1 0x00000002
#define SICRH_TSOBI2 0x00000001
-#elif defined(CONFIG_ARCH_MPC8315)
-/* SICRL bits - MPC8315 specific */
-#define SICRL_DMA_CH0 0xc0000000
-#define SICRL_DMA_SPI 0x30000000
-#define SICRL_UART 0x0c000000
-#define SICRL_IRQ4 0x02000000
-#define SICRL_IRQ5 0x01800000
-#define SICRL_IRQ6_7 0x00400000
-#define SICRL_IIC1 0x00300000
-#define SICRL_TDM 0x000c0000
-#define SICRL_TDM_SHARED 0x00030000
-#define SICRL_PCI_A 0x0000c000
-#define SICRL_ELBC_A 0x00003000
-#define SICRL_ETSEC1_A 0x000000c0
-#define SICRL_ETSEC1_B 0x00000030
-#define SICRL_ETSEC1_C 0x0000000c
-#define SICRL_TSEXPOBI 0x00000001
-
-/* SICRH bits - MPC8315 specific */
-#define SICRH_GPIO_0 0xc0000000
-#define SICRH_GPIO_1 0x30000000
-#define SICRH_GPIO_2 0x0c000000
-#define SICRH_GPIO_3 0x03000000
-#define SICRH_GPIO_4 0x00c00000
-#define SICRH_GPIO_5 0x00300000
-#define SICRH_GPIO_6 0x000c0000
-#define SICRH_GPIO_7 0x00030000
-#define SICRH_GPIO_8 0x0000c000
-#define SICRH_GPIO_9 0x00003000
-#define SICRH_GPIO_10 0x00000c00
-#define SICRH_GPIO_11 0x00000300
-#define SICRH_ETSEC2_A 0x000000c0
-#define SICRH_TSOBI1 0x00000002
-#define SICRH_TSOBI2 0x00000001
-
#elif defined(CONFIG_ARCH_MPC837X)
/* SICRL bits - MPC837X specific */
#define SICRL_USB_A 0xC0000000
@@ -634,7 +599,7 @@
#define HRCWL_CE_TO_PLL_1X30 0x0000001E
#define HRCWL_CE_TO_PLL_1X31 0x0000001F
-#elif defined(CONFIG_ARCH_MPC8308) || defined(CONFIG_ARCH_MPC8315)
+#elif defined(CONFIG_ARCH_MPC8308)
#define HRCWL_SVCOD 0x30000000
#define HRCWL_SVCOD_SHIFT 28
#define HRCWL_SVCOD_DIV_2 0x00000000
@@ -981,7 +946,7 @@
#define SCCR_USBDRCM_2 0x00200000
#define SCCR_USBDRCM_3 0x00300000
-#elif defined(CONFIG_ARCH_MPC8308) || defined(CONFIG_ARCH_MPC8315)
+#elif defined(CONFIG_ARCH_MPC8308)
/* SCCR bits - MPC8315/MPC8308 specific */
#define SCCR_TSEC1CM 0xc0000000
#define SCCR_TSEC1CM_SHIFT 30
This board has not been converted to CONFIG_DM_PCI by the deadline and is also missing conversion to CONFIG_DM. Remove it. As this is the last ARCH_MPC8315 platform, remove that support as well. Signed-off-by: Tom Rini <trini@konsulko.com> --- arch/powerpc/cpu/mpc83xx/Kconfig | 14 - arch/powerpc/cpu/mpc83xx/hrcw/Kconfig | 3 +- arch/powerpc/cpu/mpc83xx/speed.c | 41 +- arch/powerpc/include/asm/arch-mpc83xx/gpio.h | 3 +- arch/powerpc/include/asm/global_data.h | 5 +- arch/powerpc/include/asm/immap_83xx.h | 45 --- arch/powerpc/include/asm/mpc8xxx_spi.h | 1 - board/freescale/mpc8315erdb/Kconfig | 12 - board/freescale/mpc8315erdb/MAINTAINERS | 7 - board/freescale/mpc8315erdb/Makefile | 6 - board/freescale/mpc8315erdb/README | 105 ------ board/freescale/mpc8315erdb/mpc8315erdb.c | 249 ------------- board/freescale/mpc8315erdb/sdram.c | 115 ------ configs/MPC8315ERDB_defconfig | 156 -------- include/configs/MPC8315ERDB.h | 370 ------------------- include/mpc83xx.h | 39 +- 16 files changed, 11 insertions(+), 1160 deletions(-) delete mode 100644 board/freescale/mpc8315erdb/Kconfig delete mode 100644 board/freescale/mpc8315erdb/MAINTAINERS delete mode 100644 board/freescale/mpc8315erdb/Makefile delete mode 100644 board/freescale/mpc8315erdb/README delete mode 100644 board/freescale/mpc8315erdb/mpc8315erdb.c delete mode 100644 board/freescale/mpc8315erdb/sdram.c delete mode 100644 configs/MPC8315ERDB_defconfig delete mode 100644 include/configs/MPC8315ERDB.h