Message ID | 20210414103358.15465-1-ykaukab@suse.de |
---|---|
State | Awaiting Upstream |
Delegated to: | Priyanka Jain |
Headers | show |
Series | ls1012a: net: pfe: remove pfe stop from bootcmd | expand |
On Wed, Apr 14, 2021 at 1:34 PM Mian Yousaf Kaukab <ykaukab@suse.de> wrote: > > When using bootefi to boot a EFI binary, u-boot is supposed to > provide networking service for EFI application. Currently, 'pfe stop' > command is called from bootcmd before running bootefi. As a result > network stops working for EFI applications and console is flooded with > "Rx pkt not on expected port" messages. > > Implement board_quiesce_devices() for ls1012a boards and call > pfe_command_stop() from it instead of calling 'pfe stop' from > *_bootcmd and bootcmd. > > Tested-by: Anji Jagarlmudi <anji.jagarlmudi@nxp.com> > Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de> > --- > board/freescale/ls1012afrdm/ls1012afrdm.c | 8 ++++++++ > board/freescale/ls1012aqds/ls1012aqds.c | 8 ++++++++ > board/freescale/ls1012ardb/ls1012ardb.c | 8 ++++++++ > drivers/net/pfe_eth/pfe_cmd.c | 2 +- > include/configs/ls1012a2g5rdb.h | 6 +++--- > include/configs/ls1012a_common.h | 4 ++-- > include/configs/ls1012afrdm.h | 6 +++--- > include/configs/ls1012afrwy.h | 6 +++--- > include/configs/ls1012aqds.h | 6 +++--- > include/configs/ls1012ardb.h | 6 +++--- > include/net/pfe_eth/pfe/pfe_hw.h | 6 ++++++ > 11 files changed, 48 insertions(+), 18 deletions(-) > > diff --git a/board/freescale/ls1012afrdm/ls1012afrdm.c b/board/freescale/ls1012afrdm/ls1012afrdm.c > index 2cd651b943fb..7e87e5a9846f 100644 > --- a/board/freescale/ls1012afrdm/ls1012afrdm.c > +++ b/board/freescale/ls1012afrdm/ls1012afrdm.c > @@ -23,6 +23,7 @@ > #include <fsl_mmdc.h> > #include <netdev.h> > #include <fsl_sec.h> > +#include <net/pfe_eth/pfe/pfe_hw.h> > > DECLARE_GLOBAL_DATA_PTR; > > @@ -185,6 +186,13 @@ int board_init(void) > return 0; > } > > +#ifdef CONFIG_FSL_PFE > +void board_quiesce_devices(void) > +{ > + pfe_command_stop(0, NULL); > +} > +#endif > + > int ft_board_setup(void *blob, struct bd_info *bd) > { > arch_fixup_fdt(blob); > diff --git a/board/freescale/ls1012aqds/ls1012aqds.c b/board/freescale/ls1012aqds/ls1012aqds.c > index cfe3f3360cd9..4f98a8652f21 100644 > --- a/board/freescale/ls1012aqds/ls1012aqds.c > +++ b/board/freescale/ls1012aqds/ls1012aqds.c > @@ -32,6 +32,7 @@ > #include "../common/qixis.h" > #include "ls1012aqds_qixis.h" > #include "ls1012aqds_pfe.h" > +#include <net/pfe_eth/pfe/pfe_hw.h> > > DECLARE_GLOBAL_DATA_PTR; > > @@ -163,6 +164,13 @@ int board_init(void) > return 0; > } > > +#ifdef CONFIG_FSL_PFE > +void board_quiesce_devices(void) > +{ > + pfe_command_stop(0, NULL); > +} > +#endif > + > int esdhc_status_fixup(void *blob, const char *compat) > { > char esdhc0_path[] = "/soc/esdhc@1560000"; > diff --git a/board/freescale/ls1012ardb/ls1012ardb.c b/board/freescale/ls1012ardb/ls1012ardb.c > index 41bcf6f935e9..62e8af48cf14 100644 > --- a/board/freescale/ls1012ardb/ls1012ardb.c > +++ b/board/freescale/ls1012ardb/ls1012ardb.c > @@ -28,6 +28,7 @@ > #include <fsl_mmdc.h> > #include <netdev.h> > #include <fsl_sec.h> > +#include <net/pfe_eth/pfe/pfe_hw.h> > > DECLARE_GLOBAL_DATA_PTR; > > @@ -186,6 +187,13 @@ int board_init(void) > return 0; > } > > +#ifdef CONFIG_FSL_PFE > +void board_quiesce_devices(void) > +{ > + pfe_command_stop(0, NULL); > +} > +#endif > + > #ifdef CONFIG_TARGET_LS1012ARDB > int esdhc_status_fixup(void *blob, const char *compat) > { > diff --git a/drivers/net/pfe_eth/pfe_cmd.c b/drivers/net/pfe_eth/pfe_cmd.c > index 1e69525cb71f..364750f65c75 100644 > --- a/drivers/net/pfe_eth/pfe_cmd.c > +++ b/drivers/net/pfe_eth/pfe_cmd.c > @@ -418,7 +418,7 @@ static void send_dummy_pkt_to_hif(void) > writel(buf, TMU_PHY_INQ_PKTINFO); > } > > -static void pfe_command_stop(int argc, char *const argv[]) > +void pfe_command_stop(int argc, char *const argv[]) > { > int pfe_pe_id, hif_stop_loop = 10; > u32 rx_status; > diff --git a/include/configs/ls1012a2g5rdb.h b/include/configs/ls1012a2g5rdb.h > index bbc3ffd7f0d3..c55fc6487756 100644 > --- a/include/configs/ls1012a2g5rdb.h > +++ b/include/configs/ls1012a2g5rdb.h > @@ -79,7 +79,7 @@ > "installer=load mmc 0:2 $load_addr " \ > "/flex_installer_arm64.itb; " \ > "bootm $load_addr#$board\0" \ > - "qspi_bootcmd=pfe stop; echo Trying load from qspi..;" \ > + "qspi_bootcmd=echo Trying load from qspi..;" \ > "sf probe && sf read $load_addr " \ > "$kernel_addr $kernel_size; env exists secureboot " \ > "&& sf read $kernelheader_addr_r $kernelheader_addr " \ > @@ -89,11 +89,11 @@ > #undef CONFIG_BOOTCOMMAND > #ifdef CONFIG_TFABOOT > #undef QSPI_NOR_BOOTCOMMAND > -#define QSPI_NOR_BOOTCOMMAND "pfe stop;run distro_bootcmd; run qspi_bootcmd; " \ > +#define QSPI_NOR_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; " \ > "env exists secureboot && esbc_halt;" > #else > #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) > -#define CONFIG_BOOTCOMMAND "pfe stop;run distro_bootcmd; run qspi_bootcmd; " \ > +#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; " \ > "env exists secureboot && esbc_halt;" > #endif > #endif > diff --git a/include/configs/ls1012a_common.h b/include/configs/ls1012a_common.h > index a908b0acb098..6f55acc7db11 100644 > --- a/include/configs/ls1012a_common.h > +++ b/include/configs/ls1012a_common.h > @@ -102,11 +102,11 @@ > > #undef CONFIG_BOOTCOMMAND > #ifdef CONFIG_TFABOOT > -#define QSPI_NOR_BOOTCOMMAND "pfe stop; sf probe 0:0; sf read $kernel_load "\ > +#define QSPI_NOR_BOOTCOMMAND "sf probe 0:0; sf read $kernel_load "\ > "$kernel_start $kernel_size && "\ > "bootm $kernel_load" > #else > -#define CONFIG_BOOTCOMMAND "pfe stop; sf probe 0:0; sf read $kernel_load "\ > +#define CONFIG_BOOTCOMMAND "sf probe 0:0; sf read $kernel_load "\ > "$kernel_start $kernel_size && "\ > "bootm $kernel_load" > #endif > diff --git a/include/configs/ls1012afrdm.h b/include/configs/ls1012afrdm.h > index 8de20e3ff450..8b47a0c181a6 100644 > --- a/include/configs/ls1012afrdm.h > +++ b/include/configs/ls1012afrdm.h > @@ -57,16 +57,16 @@ > "installer=load usb 0:2 $load_addr " \ > "/flex_installer_arm64.itb; " \ > "bootm $load_addr#$board\0" \ > - "qspi_bootcmd=pfe stop; echo Trying load from qspi..;" \ > + "qspi_bootcmd=echo Trying load from qspi..;" \ > "sf probe && sf read $load_addr " \ > "$kernel_addr $kernel_size && bootm $load_addr#$board\0" > > #undef CONFIG_BOOTCOMMAND > #ifdef CONFIG_TFABOOT > #undef QSPI_NOR_BOOTCOMMAND > -#define QSPI_NOR_BOOTCOMMAND "pfe stop;run distro_bootcmd;run qspi_bootcmd" > +#define QSPI_NOR_BOOTCOMMAND "run distro_bootcmd;run qspi_bootcmd" > #else > -#define CONFIG_BOOTCOMMAND "pfe stop;run distro_bootcmd;run qspi_bootcmd" > +#define CONFIG_BOOTCOMMAND "run distro_bootcmd;run qspi_bootcmd" > #endif > > #endif /* __LS1012ARDB_H__ */ > diff --git a/include/configs/ls1012afrwy.h b/include/configs/ls1012afrwy.h > index 29c344c63a95..c4c14e8ebfd9 100644 > --- a/include/configs/ls1012afrwy.h > +++ b/include/configs/ls1012afrwy.h > @@ -96,7 +96,7 @@ > "env exists secureboot " \ > "&& esbc_validate ${scripthdraddr};" \ > "source ${scriptaddr}\0" \ > - "sd_bootcmd=pfe stop; echo Trying load from sd card..;" \ > + "sd_bootcmd=echo Trying load from sd card..;" \ > "mmcinfo; mmc read $load_addr " \ > "$kernel_addr_sd $kernel_size_sd ;" \ > "env exists secureboot && mmc read $kernelheader_addr_r "\ > @@ -107,10 +107,10 @@ > #undef CONFIG_BOOTCOMMAND > #ifdef CONFIG_TFABOOT > #undef QSPI_NOR_BOOTCOMMAND > -#define QSPI_NOR_BOOTCOMMAND "pfe stop; run distro_bootcmd; run sd_bootcmd; "\ > +#define QSPI_NOR_BOOTCOMMAND "run distro_bootcmd; run sd_bootcmd; "\ > "env exists secureboot && esbc_halt;" > #else > -#define CONFIG_BOOTCOMMAND "pfe stop; run distro_bootcmd; run sd_bootcmd; "\ > +#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run sd_bootcmd; "\ > "env exists secureboot && esbc_halt;" > #endif > > diff --git a/include/configs/ls1012aqds.h b/include/configs/ls1012aqds.h > index c4c9b7f5019f..e92970a1c954 100644 > --- a/include/configs/ls1012aqds.h > +++ b/include/configs/ls1012aqds.h > @@ -147,7 +147,7 @@ > "env exists secureboot " \ > "&& esbc_validate ${scripthdraddr};" \ > "source ${scriptaddr}\0" \ > - "qspi_bootcmd=pfe stop; echo Trying load from qspi..;" \ > + "qspi_bootcmd=echo Trying load from qspi..;" \ > "sf probe 0:0 && sf read $load_addr " \ > "$kernel_addr $kernel_size; env exists secureboot " \ > "&& sf read $kernelheader_addr_r $kernelheader_addr " \ > @@ -157,10 +157,10 @@ > #undef CONFIG_BOOTCOMMAND > #ifdef CONFIG_TFABOOT > #undef QSPI_NOR_BOOTCOMMAND > -#define QSPI_NOR_BOOTCOMMAND "pfe stop; run distro_bootcmd; run qspi_bootcmd; "\ > +#define QSPI_NOR_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; "\ > "env exists secureboot && esbc_halt;" > #else > -#define CONFIG_BOOTCOMMAND "pfe stop; run distro_bootcmd; run qspi_bootcmd; "\ > +#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; "\ > "env exists secureboot && esbc_halt;" > #endif > > diff --git a/include/configs/ls1012ardb.h b/include/configs/ls1012ardb.h > index 94e742ee8446..d6b161446fe7 100644 > --- a/include/configs/ls1012ardb.h > +++ b/include/configs/ls1012ardb.h > @@ -98,7 +98,7 @@ > "installer=load mmc 0:2 $load_addr " \ > "/flex_installer_arm64.itb; " \ > "bootm $load_addr#$board\0" \ > - "qspi_bootcmd=pfe stop; echo Trying load from qspi..;" \ > + "qspi_bootcmd=echo Trying load from qspi..;" \ > "sf probe && sf read $load_addr " \ > "$kernel_addr $kernel_size; env exists secureboot " \ > "&& sf read $kernelheader_addr_r $kernelheader_addr " \ > @@ -108,10 +108,10 @@ > #undef CONFIG_BOOTCOMMAND > #ifdef CONFIG_TFABOOT > #undef QSPI_NOR_BOOTCOMMAND > -#define QSPI_NOR_BOOTCOMMAND "pfe stop; run distro_bootcmd; run qspi_bootcmd; "\ > +#define QSPI_NOR_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; "\ > "env exists secureboot && esbc_halt;" > #else > -#define CONFIG_BOOTCOMMAND "pfe stop; run distro_bootcmd; run qspi_bootcmd; "\ > +#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; "\ > "env exists secureboot && esbc_halt;" > #endif > > diff --git a/include/net/pfe_eth/pfe/pfe_hw.h b/include/net/pfe_eth/pfe/pfe_hw.h > index c69fc69130cc..71e4115afa0c 100644 > --- a/include/net/pfe_eth/pfe/pfe_hw.h > +++ b/include/net/pfe_eth/pfe/pfe_hw.h > @@ -160,4 +160,10 @@ void hif_rx_enable(void); > void hif_rx_disable(void); > void hif_rx_desc_disable(void); > > +#ifdef PFE_RESET_WA > +void pfe_command_stop(int argc, char *const argv[]); > +#else > +static void pfe_command_stop(int argc, char *const argv[]) {} > +#endif > + > #endif /* _PFE_H_ */ > -- > 2.26.2 > Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
diff --git a/board/freescale/ls1012afrdm/ls1012afrdm.c b/board/freescale/ls1012afrdm/ls1012afrdm.c index 2cd651b943fb..7e87e5a9846f 100644 --- a/board/freescale/ls1012afrdm/ls1012afrdm.c +++ b/board/freescale/ls1012afrdm/ls1012afrdm.c @@ -23,6 +23,7 @@ #include <fsl_mmdc.h> #include <netdev.h> #include <fsl_sec.h> +#include <net/pfe_eth/pfe/pfe_hw.h> DECLARE_GLOBAL_DATA_PTR; @@ -185,6 +186,13 @@ int board_init(void) return 0; } +#ifdef CONFIG_FSL_PFE +void board_quiesce_devices(void) +{ + pfe_command_stop(0, NULL); +} +#endif + int ft_board_setup(void *blob, struct bd_info *bd) { arch_fixup_fdt(blob); diff --git a/board/freescale/ls1012aqds/ls1012aqds.c b/board/freescale/ls1012aqds/ls1012aqds.c index cfe3f3360cd9..4f98a8652f21 100644 --- a/board/freescale/ls1012aqds/ls1012aqds.c +++ b/board/freescale/ls1012aqds/ls1012aqds.c @@ -32,6 +32,7 @@ #include "../common/qixis.h" #include "ls1012aqds_qixis.h" #include "ls1012aqds_pfe.h" +#include <net/pfe_eth/pfe/pfe_hw.h> DECLARE_GLOBAL_DATA_PTR; @@ -163,6 +164,13 @@ int board_init(void) return 0; } +#ifdef CONFIG_FSL_PFE +void board_quiesce_devices(void) +{ + pfe_command_stop(0, NULL); +} +#endif + int esdhc_status_fixup(void *blob, const char *compat) { char esdhc0_path[] = "/soc/esdhc@1560000"; diff --git a/board/freescale/ls1012ardb/ls1012ardb.c b/board/freescale/ls1012ardb/ls1012ardb.c index 41bcf6f935e9..62e8af48cf14 100644 --- a/board/freescale/ls1012ardb/ls1012ardb.c +++ b/board/freescale/ls1012ardb/ls1012ardb.c @@ -28,6 +28,7 @@ #include <fsl_mmdc.h> #include <netdev.h> #include <fsl_sec.h> +#include <net/pfe_eth/pfe/pfe_hw.h> DECLARE_GLOBAL_DATA_PTR; @@ -186,6 +187,13 @@ int board_init(void) return 0; } +#ifdef CONFIG_FSL_PFE +void board_quiesce_devices(void) +{ + pfe_command_stop(0, NULL); +} +#endif + #ifdef CONFIG_TARGET_LS1012ARDB int esdhc_status_fixup(void *blob, const char *compat) { diff --git a/drivers/net/pfe_eth/pfe_cmd.c b/drivers/net/pfe_eth/pfe_cmd.c index 1e69525cb71f..364750f65c75 100644 --- a/drivers/net/pfe_eth/pfe_cmd.c +++ b/drivers/net/pfe_eth/pfe_cmd.c @@ -418,7 +418,7 @@ static void send_dummy_pkt_to_hif(void) writel(buf, TMU_PHY_INQ_PKTINFO); } -static void pfe_command_stop(int argc, char *const argv[]) +void pfe_command_stop(int argc, char *const argv[]) { int pfe_pe_id, hif_stop_loop = 10; u32 rx_status; diff --git a/include/configs/ls1012a2g5rdb.h b/include/configs/ls1012a2g5rdb.h index bbc3ffd7f0d3..c55fc6487756 100644 --- a/include/configs/ls1012a2g5rdb.h +++ b/include/configs/ls1012a2g5rdb.h @@ -79,7 +79,7 @@ "installer=load mmc 0:2 $load_addr " \ "/flex_installer_arm64.itb; " \ "bootm $load_addr#$board\0" \ - "qspi_bootcmd=pfe stop; echo Trying load from qspi..;" \ + "qspi_bootcmd=echo Trying load from qspi..;" \ "sf probe && sf read $load_addr " \ "$kernel_addr $kernel_size; env exists secureboot " \ "&& sf read $kernelheader_addr_r $kernelheader_addr " \ @@ -89,11 +89,11 @@ #undef CONFIG_BOOTCOMMAND #ifdef CONFIG_TFABOOT #undef QSPI_NOR_BOOTCOMMAND -#define QSPI_NOR_BOOTCOMMAND "pfe stop;run distro_bootcmd; run qspi_bootcmd; " \ +#define QSPI_NOR_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; " \ "env exists secureboot && esbc_halt;" #else #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) -#define CONFIG_BOOTCOMMAND "pfe stop;run distro_bootcmd; run qspi_bootcmd; " \ +#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; " \ "env exists secureboot && esbc_halt;" #endif #endif diff --git a/include/configs/ls1012a_common.h b/include/configs/ls1012a_common.h index a908b0acb098..6f55acc7db11 100644 --- a/include/configs/ls1012a_common.h +++ b/include/configs/ls1012a_common.h @@ -102,11 +102,11 @@ #undef CONFIG_BOOTCOMMAND #ifdef CONFIG_TFABOOT -#define QSPI_NOR_BOOTCOMMAND "pfe stop; sf probe 0:0; sf read $kernel_load "\ +#define QSPI_NOR_BOOTCOMMAND "sf probe 0:0; sf read $kernel_load "\ "$kernel_start $kernel_size && "\ "bootm $kernel_load" #else -#define CONFIG_BOOTCOMMAND "pfe stop; sf probe 0:0; sf read $kernel_load "\ +#define CONFIG_BOOTCOMMAND "sf probe 0:0; sf read $kernel_load "\ "$kernel_start $kernel_size && "\ "bootm $kernel_load" #endif diff --git a/include/configs/ls1012afrdm.h b/include/configs/ls1012afrdm.h index 8de20e3ff450..8b47a0c181a6 100644 --- a/include/configs/ls1012afrdm.h +++ b/include/configs/ls1012afrdm.h @@ -57,16 +57,16 @@ "installer=load usb 0:2 $load_addr " \ "/flex_installer_arm64.itb; " \ "bootm $load_addr#$board\0" \ - "qspi_bootcmd=pfe stop; echo Trying load from qspi..;" \ + "qspi_bootcmd=echo Trying load from qspi..;" \ "sf probe && sf read $load_addr " \ "$kernel_addr $kernel_size && bootm $load_addr#$board\0" #undef CONFIG_BOOTCOMMAND #ifdef CONFIG_TFABOOT #undef QSPI_NOR_BOOTCOMMAND -#define QSPI_NOR_BOOTCOMMAND "pfe stop;run distro_bootcmd;run qspi_bootcmd" +#define QSPI_NOR_BOOTCOMMAND "run distro_bootcmd;run qspi_bootcmd" #else -#define CONFIG_BOOTCOMMAND "pfe stop;run distro_bootcmd;run qspi_bootcmd" +#define CONFIG_BOOTCOMMAND "run distro_bootcmd;run qspi_bootcmd" #endif #endif /* __LS1012ARDB_H__ */ diff --git a/include/configs/ls1012afrwy.h b/include/configs/ls1012afrwy.h index 29c344c63a95..c4c14e8ebfd9 100644 --- a/include/configs/ls1012afrwy.h +++ b/include/configs/ls1012afrwy.h @@ -96,7 +96,7 @@ "env exists secureboot " \ "&& esbc_validate ${scripthdraddr};" \ "source ${scriptaddr}\0" \ - "sd_bootcmd=pfe stop; echo Trying load from sd card..;" \ + "sd_bootcmd=echo Trying load from sd card..;" \ "mmcinfo; mmc read $load_addr " \ "$kernel_addr_sd $kernel_size_sd ;" \ "env exists secureboot && mmc read $kernelheader_addr_r "\ @@ -107,10 +107,10 @@ #undef CONFIG_BOOTCOMMAND #ifdef CONFIG_TFABOOT #undef QSPI_NOR_BOOTCOMMAND -#define QSPI_NOR_BOOTCOMMAND "pfe stop; run distro_bootcmd; run sd_bootcmd; "\ +#define QSPI_NOR_BOOTCOMMAND "run distro_bootcmd; run sd_bootcmd; "\ "env exists secureboot && esbc_halt;" #else -#define CONFIG_BOOTCOMMAND "pfe stop; run distro_bootcmd; run sd_bootcmd; "\ +#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run sd_bootcmd; "\ "env exists secureboot && esbc_halt;" #endif diff --git a/include/configs/ls1012aqds.h b/include/configs/ls1012aqds.h index c4c9b7f5019f..e92970a1c954 100644 --- a/include/configs/ls1012aqds.h +++ b/include/configs/ls1012aqds.h @@ -147,7 +147,7 @@ "env exists secureboot " \ "&& esbc_validate ${scripthdraddr};" \ "source ${scriptaddr}\0" \ - "qspi_bootcmd=pfe stop; echo Trying load from qspi..;" \ + "qspi_bootcmd=echo Trying load from qspi..;" \ "sf probe 0:0 && sf read $load_addr " \ "$kernel_addr $kernel_size; env exists secureboot " \ "&& sf read $kernelheader_addr_r $kernelheader_addr " \ @@ -157,10 +157,10 @@ #undef CONFIG_BOOTCOMMAND #ifdef CONFIG_TFABOOT #undef QSPI_NOR_BOOTCOMMAND -#define QSPI_NOR_BOOTCOMMAND "pfe stop; run distro_bootcmd; run qspi_bootcmd; "\ +#define QSPI_NOR_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; "\ "env exists secureboot && esbc_halt;" #else -#define CONFIG_BOOTCOMMAND "pfe stop; run distro_bootcmd; run qspi_bootcmd; "\ +#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; "\ "env exists secureboot && esbc_halt;" #endif diff --git a/include/configs/ls1012ardb.h b/include/configs/ls1012ardb.h index 94e742ee8446..d6b161446fe7 100644 --- a/include/configs/ls1012ardb.h +++ b/include/configs/ls1012ardb.h @@ -98,7 +98,7 @@ "installer=load mmc 0:2 $load_addr " \ "/flex_installer_arm64.itb; " \ "bootm $load_addr#$board\0" \ - "qspi_bootcmd=pfe stop; echo Trying load from qspi..;" \ + "qspi_bootcmd=echo Trying load from qspi..;" \ "sf probe && sf read $load_addr " \ "$kernel_addr $kernel_size; env exists secureboot " \ "&& sf read $kernelheader_addr_r $kernelheader_addr " \ @@ -108,10 +108,10 @@ #undef CONFIG_BOOTCOMMAND #ifdef CONFIG_TFABOOT #undef QSPI_NOR_BOOTCOMMAND -#define QSPI_NOR_BOOTCOMMAND "pfe stop; run distro_bootcmd; run qspi_bootcmd; "\ +#define QSPI_NOR_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; "\ "env exists secureboot && esbc_halt;" #else -#define CONFIG_BOOTCOMMAND "pfe stop; run distro_bootcmd; run qspi_bootcmd; "\ +#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; "\ "env exists secureboot && esbc_halt;" #endif diff --git a/include/net/pfe_eth/pfe/pfe_hw.h b/include/net/pfe_eth/pfe/pfe_hw.h index c69fc69130cc..71e4115afa0c 100644 --- a/include/net/pfe_eth/pfe/pfe_hw.h +++ b/include/net/pfe_eth/pfe/pfe_hw.h @@ -160,4 +160,10 @@ void hif_rx_enable(void); void hif_rx_disable(void); void hif_rx_desc_disable(void); +#ifdef PFE_RESET_WA +void pfe_command_stop(int argc, char *const argv[]); +#else +static void pfe_command_stop(int argc, char *const argv[]) {} +#endif + #endif /* _PFE_H_ */