@@ -1,43 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
- * Copyright (C) 2017 Marvell Technology Group Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPLv2 or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
+ * Copyright (C) 2016- 2021 Marvell International Ltd.
*/
/*
@@ -58,8 +21,8 @@
};
aliases {
- i2c0 = &cpm_i2c0;
- spi0 = &cpm_spi1;
+ i2c0 = &cp0_i2c0;
+ spi0 = &cp0_spi1;
};
memory@00000000 {
@@ -83,18 +46,18 @@
};
-&cpm_pcie2 {
+&cp0_pcie2 {
status = "okay";
};
-&cpm_i2c0 {
+&cp0_i2c0 {
pinctrl-names = "default";
- pinctrl-0 = <&cpm_i2c0_pins>;
+ pinctrl-0 = <&cp0_i2c0_pins>;
status = "okay";
clock-frequency = <100000>;
};
-&cpm_pinctl {
+&cp0_pinctl {
/* MPP Bus:
* AUDIO [0-5]
* GBE [6-11]
@@ -122,9 +85,9 @@
0xe 0xe 0x0>;
};
-&cpm_spi1 {
+&cp0_spi1 {
pinctrl-names = "default";
- pinctrl-0 = <&cpm_spi0_pins>;
+ pinctrl-0 = <&cp0_spi0_pins>;
status = "disabled";
spi-flash@0 {
@@ -152,19 +115,19 @@
};
};
-&cpm_sata0 {
+&cp0_sata0 {
status = "okay";
};
-&cpm_usb3_0 {
+&cp0_usb3_0 {
status = "okay";
};
-&cpm_usb3_1 {
+&cp0_usb3_1 {
status = "okay";
};
-&cpm_comphy {
+&cp0_comphy {
phy0 {
phy-type = <PHY_TYPE_SGMII2>;
phy-speed = <PHY_SPEED_3_125G>;
@@ -196,15 +159,15 @@
};
};
-&cpm_nand {
+&cp0_nand {
status = "okay";
};
-&cpm_utmi0 {
+&cp0_utmi0 {
status = "okay";
};
-&cpm_utmi1 {
+&cp0_utmi1 {
status = "okay";
};
@@ -215,7 +178,7 @@
non-removable;
};
-&cpm_sdhci0 {
+&cp0_sdhci0 {
status = "okay";
bus-width = <4>;
no-1-8-v;
@@ -1,43 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
- * Copyright (C) 2016 Marvell Technology Group Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPLv2 or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
+ * Copyright (C) 2016- 2021 Marvell International Ltd.
*/
/*
@@ -57,8 +20,8 @@
};
aliases {
- i2c0 = &cpm_i2c0;
- spi0 = &cpm_spi1;
+ i2c0 = &cp0_i2c0;
+ spi0 = &cp0_spi1;
};
memory@00000000 {
@@ -82,18 +45,18 @@
};
-&cpm_pcie2 {
+&cp0_pcie2 {
status = "okay";
};
-&cpm_i2c0 {
+&cp0_i2c0 {
pinctrl-names = "default";
- pinctrl-0 = <&cpm_i2c0_pins>;
+ pinctrl-0 = <&cp0_i2c0_pins>;
status = "okay";
clock-frequency = <100000>;
};
-&cpm_pinctl {
+&cp0_pinctl {
/* MPP Bus:
* TDM [0-11]
* SPI [13-16]
@@ -115,9 +78,9 @@
0xE 0xE 0xE >;
};
-&cpm_spi1 {
+&cp0_spi1 {
pinctrl-names = "default";
- pinctrl-0 = <&cpm_spi0_pins>;
+ pinctrl-0 = <&cp0_spi0_pins>;
status = "okay";
spi-flash@0 {
@@ -145,19 +108,19 @@
};
};
-&cpm_sata0 {
+&cp0_sata0 {
status = "okay";
};
-&cpm_usb3_0 {
+&cp0_usb3_0 {
status = "okay";
};
-&cpm_usb3_1 {
+&cp0_usb3_1 {
status = "okay";
};
-&cpm_comphy {
+&cp0_comphy {
phy0 {
phy-type = <PHY_TYPE_SGMII1>;
phy-speed = <PHY_SPEED_1_25G>;
@@ -188,11 +151,11 @@
};
};
-&cpm_utmi0 {
+&cp0_utmi0 {
status = "okay";
};
-&cpm_utmi1 {
+&cp0_utmi1 {
status = "okay";
};
@@ -203,14 +166,14 @@
non-removable;
};
-&cpm_sdhci0 {
+&cp0_sdhci0 {
status = "okay";
bus-width = <4>;
no-1-8-v;
non-removable;
};
-&cpm_mdio {
+&cp0_mdio {
phy0: ethernet-phy@0 {
reg = <0>;
};
@@ -219,22 +182,22 @@
};
};
-&cpm_ethernet {
+&cp0_ethernet {
status = "okay";
};
-&cpm_eth0 {
+&cp0_eth0 {
status = "okay";
phy-mode = "sfi"; /* lane-2 */
};
-&cpm_eth1 {
+&cp0_eth1 {
status = "okay";
phy = <&phy0>;
phy-mode = "sgmii";
};
-&cpm_eth2 {
+&cp0_eth2 {
status = "okay";
phy = <&phy1>;
phy-mode = "rgmii-id";
@@ -1,43 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
- * Copyright (C) 2016 Marvell Technology Group Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPLv2 or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
+ * Copyright (C) 2016- 2021 Marvell International Ltd.
*/
/*
@@ -46,11 +9,56 @@
*/
#include <dt-bindings/gpio/gpio.h>
+#include "armada-common.dtsi"
+#include "armada-8k.dtsi"
#include "armada-ap806-quad.dtsi"
-#include "armada-cp110-master.dtsi"
+
+/* CP110-0 Settings */
+#define CP110_NAME cp0
+#define CP110_NUM 0
+
+#include "armada-cp110.dtsi"
+
+#undef CP110_NAME
+#undef CP110_NUM
/ {
model = "Marvell Armada 7040";
compatible = "marvell,armada7040", "marvell,armada-ap806-quad",
"marvell,armada-ap806";
};
+
+&cp0_pinctl {
+ compatible = "marvell,mvebu-pinctrl", "marvell,7k-pinctrl";
+ bank-name ="cp0-110";
+
+ cp0_i2c0_pins: cp0-i2c-pins-0 {
+ marvell,pins = < 37 38 >;
+ marvell,function = <2>;
+ };
+ cp0_i2c1_pins: cp0-i2c-pins-1 {
+ marvell,pins = < 35 36 >;
+ marvell,function = <2>;
+ };
+ cp0_ge1_rgmii_pins: cp0-ge-rgmii-pins-0 {
+ marvell,pins = < 0 1 2 3 4 5 6 7 8 9 10 11>;
+ marvell,function = <3>;
+ };
+ cp0_ge2_rgmii_pins: cp0-ge-rgmii-pins-1 {
+ marvell,pins = < 44 45 46 47 48 49 50 51
+ 52 53 54 55 >;
+ marvell,function = <1>;
+ };
+ cp0_pca0_pins: cp0-pca0_pins {
+ marvell,pins = <62>;
+ marvell,function = <0>;
+ };
+ cp0_sdhci_pins: cp0-sdhi-pins-0 {
+ marvell,pins = < 56 57 58 59 60 61 >;
+ marvell,function = <14>;
+ };
+ cp0_spi0_pins: cp0-spi-pins-0 {
+ marvell,pins = < 13 14 15 16 >;
+ marvell,function = <3>;
+ };
+};
@@ -1,43 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
- * Copyright (C) 2016 Marvell Technology Group Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPLv2 or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
+ * Copyright (C) 2016- 2021 Marvell International Ltd.
*/
/*
@@ -45,9 +8,27 @@
* two CP110.
*/
+#include "armada-common.dtsi"
+#include "armada-8k.dtsi"
#include "armada-ap806-dual.dtsi"
-#include "armada-cp110-master.dtsi"
-#include "armada-cp110-slave.dtsi"
+
+/* CP110-0 Settings */
+#define CP110_NAME cp0
+#define CP110_NUM 0
+
+#include "armada-cp110.dtsi"
+
+#undef CP110_NAME
+#undef CP110_NUM
+
+/* CP110-1 Settings */
+#define CP110_NAME cp1
+#define CP110_NUM 1
+
+#include "armada-cp110.dtsi"
+
+#undef CP110_NAME
+#undef CP110_NUM
/ {
model = "Marvell Armada 8020";
@@ -15,9 +15,9 @@
};
aliases {
- i2c0 = &cpm_i2c0;
- i2c1 = &cpm_i2c1;
- spi0 = &cps_spi1;
+ i2c0 = &cp0_i2c0;
+ i2c1 = &cp0_i2c1;
+ spi0 = &cp1_spi1;
};
memory@00000000 {
@@ -31,14 +31,14 @@
reg_usb3h0_vbus: usb3-vbus0 {
compatible = "regulator-fixed";
pinctrl-names = "default";
- pinctrl-0 = <&cpm_xhci_vbus_pins>;
+ pinctrl-0 = <&cp0_xhci_vbus_pins>;
regulator-name = "reg-usb3h0-vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
startup-delay-us = <300000>;
shutdown-delay-us = <500000>;
regulator-force-boot-off;
- gpio = <&cpm_gpio1 15 GPIO_ACTIVE_LOW>; /* GPIO[47] */
+ gpio = <&cp0_gpio1 15 GPIO_ACTIVE_LOW>; /* GPIO[47] */
};
};
};
@@ -66,7 +66,7 @@
status = "okay";
};
-&cpm_pinctl {
+&cp0_pinctl {
/*
* MPP Bus:
* [0-31] = 0xff: Keep default CP0_shared_pins:
@@ -99,57 +99,57 @@
0 0 0 0 0 0 0xe 0xe 0xe 0xe
0xe 0xe 0 >;
- cpm_pcie_reset_pins: cpm-pcie-reset-pins {
+ cp0_pcie_reset_pins: cp0-pcie-reset-pins {
marvell,pins = < 32 >;
marvell,function = <0>;
};
- cpm_xhci_vbus_pins: cpm-xhci-vbus-pins {
+ cp0_xhci_vbus_pins: cp0-xhci-vbus-pins {
marvell,pins = < 47 >;
marvell,function = <0>;
};
- cps_1g_phy_reset: cps-1g-phy-reset {
+ cp1_1g_phy_reset: cp1-1g-phy-reset {
marvell,pins = < 43 >;
marvell,function = <0>;
};
};
/* uSD slot */
-&cpm_sdhci0 {
+&cp0_sdhci0 {
pinctrl-names = "default";
- pinctrl-0 = <&cpm_sdhci_pins>;
+ pinctrl-0 = <&cp0_sdhci_pins>;
bus-width = <4>;
status = "okay";
};
-&cpm_pcie0 {
+&cp0_pcie0 {
num-lanes = <1>;
pinctrl-names = "default";
- pinctrl-0 = <&cpm_pcie_reset_pins>;
- marvell,reset-gpio = <&cpm_gpio1 0 GPIO_ACTIVE_LOW>;
+ pinctrl-0 = <&cp0_pcie_reset_pins>;
+ marvell,reset-gpio = <&cp0_gpio1 0 GPIO_ACTIVE_LOW>;
status = "okay";
};
-&cpm_i2c0 {
+&cp0_i2c0 {
pinctrl-names = "default";
- pinctrl-0 = <&cpm_i2c0_pins>;
+ pinctrl-0 = <&cp0_i2c0_pins>;
status = "okay";
clock-frequency = <100000>;
};
-&cpm_i2c1 {
+&cp0_i2c1 {
pinctrl-names = "default";
- pinctrl-0 = <&cpm_i2c1_pins>;
+ pinctrl-0 = <&cp0_i2c1_pins>;
status = "okay";
clock-frequency = <100000>;
};
-&cpm_sata0 {
+&cp0_sata0 {
status = "okay";
};
-&cpm_comphy {
+&cp0_comphy {
/*
* CP0 Serdes Configuration:
* Lane 0: PCIe0 (x1)
@@ -179,31 +179,31 @@
};
};
-&cpm_ethernet {
+&cp0_ethernet {
pinctrl-names = "default";
status = "okay";
};
/* 10G SFI SFP */
-&cpm_eth0 {
+&cp0_eth0 {
status = "okay";
phy-mode = "sfi";
};
-&cps_sata0 {
+&cp1_sata0 {
status = "okay";
};
-&cps_usb3_0 {
+&cp1_usb3_0 {
vbus-supply = <®_usb3h0_vbus>;
status = "okay";
};
-&cps_utmi0 {
+&cp1_utmi0 {
status = "okay";
};
-&cps_pinctl {
+&cp1_pinctl {
/*
* MPP Bus:
* [0-5] TDM
@@ -234,9 +234,9 @@
0xff 0xff 0xff>;
};
-&cps_spi1 {
+&cp1_spi1 {
pinctrl-names = "default";
- pinctrl-0 = <&cps_spi1_pins>;
+ pinctrl-0 = <&cp1_spi1_pins>;
status = "okay";
spi-flash@0 {
@@ -261,7 +261,7 @@
};
};
-&cps_comphy {
+&cp1_comphy {
/*
* CP1 Serdes Configuration:
* Lane 0: SATA 1 (RX swapped). Can be PCIe0
@@ -294,30 +294,30 @@
};
};
-&cps_mdio {
+&cp1_mdio {
phy0: ethernet-phy@0 {
reg = <0>;
};
};
-&cps_ethernet {
+&cp1_ethernet {
pinctrl-names = "default";
- pinctrl-0 = <&cps_1g_phy_reset>;
+ pinctrl-0 = <&cp1_1g_phy_reset>;
status = "okay";
};
/* 1G SGMII */
-&cps_eth1 {
+&cp1_eth1 {
status = "okay";
phy-mode = "sgmii";
phy = <&phy0>;
- phy-reset-gpios = <&cpm_gpio1 11 GPIO_ACTIVE_LOW>;
+ phy-reset-gpios = <&cp0_gpio1 11 GPIO_ACTIVE_LOW>;
};
/* 2.5G to Topaz switch */
-&cps_eth2 {
+&cp1_eth2 {
status = "okay";
phy-mode = "sgmii";
phy-speed = <2500>;
- phy-reset-gpios = <&cps_gpio0 24 GPIO_ACTIVE_LOW>;
+ phy-reset-gpios = <&cp1_gpio0 24 GPIO_ACTIVE_LOW>;
};
@@ -1,43 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0
/*
- * Copyright (C) 2016 Marvell Technology Group Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPLv2 or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
+ * Copyright (C) 2016 - 2021 Marvell International Ltd.
*/
/*
@@ -56,8 +19,8 @@
};
aliases {
- i2c0 = &cpm_i2c0;
- spi0 = &cps_spi1;
+ i2c0 = &cp0_i2c0;
+ spi0 = &cp1_spi1;
};
memory@00000000 {
@@ -88,7 +51,7 @@
status = "okay";
};
-&cpm_pinctl {
+&cp0_pinctl {
/* MPP Bus:
* [0-31] = 0xff: Keep default CP0_shared_pins
* [11] CLKOUT_MPP_11 (out)
@@ -116,7 +79,7 @@
0xe 0xe 0xe>;
};
-&cpm_comphy {
+&cp0_comphy {
/* Serdes Configuration:
* Lane 0: PCIe0 (x1)
* Lane 1: SATA0
@@ -146,57 +109,57 @@
};
/* CON6 on CP0 expansion */
-&cpm_pcie0 {
+&cp0_pcie0 {
status = "okay";
};
-&cpm_pcie1 {
+&cp0_pcie1 {
status = "disabled";
};
/* CON5 on CP0 expansion */
-&cpm_pcie2 {
+&cp0_pcie2 {
status = "okay";
};
-&cpm_i2c0 {
+&cp0_i2c0 {
pinctrl-names = "default";
- pinctrl-0 = <&cpm_i2c0_pins>;
+ pinctrl-0 = <&cp0_i2c0_pins>;
status = "okay";
clock-frequency = <100000>;
};
/* CON4 on CP0 expansion */
-&cpm_sata0 {
+&cp0_sata0 {
status = "okay";
};
/* CON9 on CP0 expansion */
-&cpm_usb3_0 {
+&cp0_usb3_0 {
status = "okay";
};
/* CON10 on CP0 expansion */
-&cpm_usb3_1 {
+&cp0_usb3_1 {
status = "okay";
};
-&cpm_utmi0 {
+&cp0_utmi0 {
status = "okay";
};
-&cpm_utmi1 {
+&cp0_utmi1 {
status = "okay";
};
-&cpm_sdhci0 {
+&cp0_sdhci0 {
pinctrl-names = "default";
- pinctrl-0 = <&cpm_sdhci_pins>;
+ pinctrl-0 = <&cp0_sdhci_pins>;
bus-width = <4>;
status = "okay";
};
-&cps_pinctl {
+&cp1_pinctl {
/* MPP Bus:
* [0-11] RGMII0
* [13-16] SPI1
@@ -215,7 +178,7 @@
0xff 0xff 0xff>;
};
-&cps_comphy {
+&cp1_comphy {
/* Serdes Configuration:
* Lane 0: PCIe0 (x1)
* Lane 1: SATA0
@@ -245,22 +208,22 @@
};
/* CON6 on CP1 expansion */
-&cps_pcie0 {
+&cp1_pcie0 {
status = "okay";
};
-&cps_pcie1 {
+&cp1_pcie1 {
status = "okay";
};
/* CON5 on CP1 expansion */
-&cps_pcie2 {
+&cp1_pcie2 {
status = "okay";
};
-&cps_spi1 {
+&cp1_spi1 {
pinctrl-names = "default";
- pinctrl-0 = <&cps_spi1_pins>;
+ pinctrl-0 = <&cp1_spi1_pins>;
status = "okay";
spi-flash@0 {
@@ -288,35 +251,35 @@
};
/* CON4 on CP1 expansion */
-&cps_sata0 {
+&cp1_sata0 {
status = "okay";
};
/* CON9 on CP1 expansion */
-&cps_usb3_0 {
+&cp1_usb3_0 {
status = "okay";
};
/* CON10 on CP1 expansion */
-&cps_usb3_1 {
+&cp1_usb3_1 {
status = "okay";
};
-&cps_utmi0 {
+&cp1_utmi0 {
status = "okay";
};
-&cpm_mdio {
+&cp0_mdio {
phy1: ethernet-phy@1 {
reg = <1>;
};
};
-&cpm_ethernet {
+&cp0_ethernet {
status = "okay";
};
-&cpm_eth2 {
+&cp0_eth2 {
status = "okay";
phy = <&phy1>;
phy-mode = "rgmii-id";
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
/*
- * Copyright (C) 2016 Marvell International Ltd.
+ * Copyright (C) 2016 - 2021 Marvell International Ltd.
*/
#include "armada-8040.dtsi" /* include SoC device tree */
@@ -15,12 +15,12 @@
};
aliases {
- i2c0 = &cpm_i2c0;
- i2c1 = &cpm_i2c1;
- spi0 = &cps_spi1;
+ i2c0 = &cp0_i2c0;
+ i2c1 = &cp0_i2c1;
+ spi0 = &cp1_spi1;
gpio0 = &ap_gpio0;
- gpio1 = &cpm_gpio0;
- gpio2 = &cpm_gpio1;
+ gpio1 = &cp0_gpio0;
+ gpio2 = &cp0_gpio1;
};
memory@00000000 {
@@ -36,7 +36,7 @@
reg_usb3h0_vbus: usb3-vbus0 {
compatible = "regulator-fixed";
pinctrl-names = "default";
- pinctrl-0 = <&cpm_xhci_vbus_pins>;
+ pinctrl-0 = <&cp0_xhci_vbus_pins>;
regulator-name = "reg-usb3h0-vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
@@ -44,7 +44,7 @@
enable-active-high;
regulator-always-on;
regulator-boot-on;
- gpio = <&cpm_gpio1 15 GPIO_ACTIVE_HIGH>; /* GPIO[47] */
+ gpio = <&cp0_gpio1 15 GPIO_ACTIVE_HIGH>; /* GPIO[47] */
};
};
};
@@ -73,7 +73,7 @@
status = "okay";
};
-&cpm_pinctl {
+&cp0_pinctl {
/*
* MPP Bus:
* [0-31] = 0xff: Keep default CP0_shared_pins:
@@ -108,59 +108,59 @@
0 0 0 0 0 0 0xe 0xe 0xe 0xe
0xe 0xe 0 >;
- cpm_xhci_vbus_pins: cpm-xhci-vbus-pins {
+ cp0_xhci_vbus_pins: cp0-xhci-vbus-pins {
marvell,pins = < 47 >;
marvell,function = <0>;
};
- cpm_pcie_reset_pins: cpm-pcie-reset-pins {
+ cp0_pcie_reset_pins: cp0-pcie-reset-pins {
marvell,pins = < 52 >;
marvell,function = <0>;
};
};
/* uSD slot */
-&cpm_sdhci0 {
+&cp0_sdhci0 {
pinctrl-names = "default";
- pinctrl-0 = <&cpm_sdhci_pins>;
+ pinctrl-0 = <&cp0_sdhci_pins>;
bus-width= <4>;
status = "okay";
};
/* PCIe x4 */
-&cpm_pcie0 {
+&cp0_pcie0 {
num-lanes = <4>;
pinctrl-names = "default";
- pinctrl-0 = <&cpm_pcie_reset_pins>;
- marvell,reset-gpio = <&cpm_gpio1 20 GPIO_ACTIVE_LOW>; /* GPIO[52] */
+ pinctrl-0 = <&cp0_pcie_reset_pins>;
+ marvell,reset-gpio = <&cp0_gpio1 20 GPIO_ACTIVE_LOW>; /* GPIO[52] */
status = "okay";
};
-&cpm_i2c0 {
+&cp0_i2c0 {
pinctrl-names = "default";
- pinctrl-0 = <&cpm_i2c0_pins>;
+ pinctrl-0 = <&cp0_i2c0_pins>;
status = "okay";
clock-frequency = <100000>;
};
-&cpm_i2c1 {
+&cp0_i2c1 {
pinctrl-names = "default";
- pinctrl-0 = <&cpm_i2c1_pins>;
+ pinctrl-0 = <&cp0_i2c1_pins>;
status = "okay";
clock-frequency = <100000>;
};
-&cpm_sata0 {
+&cp0_sata0 {
status = "okay";
};
-&cpm_mdio {
+&cp0_mdio {
ge_phy: ethernet-phy@0 {
reg = <0>;
};
};
-&cpm_comphy {
+&cp0_comphy {
/*
* CP0 Serdes Configuration:
* Lane 0: PCIe0 (x4)
@@ -190,30 +190,30 @@
};
};
-&cps_sata0 {
+&cp1_sata0 {
status = "okay";
};
-&cps_usb3_0 {
+&cp1_usb3_0 {
vbus-supply = <®_usb3h0_vbus>;
status = "okay";
};
-&cps_utmi0 {
+&cp1_utmi0 {
status = "okay";
};
-&cps_ethernet {
+&cp1_ethernet {
status = "okay";
};
-&cps_eth1 {
+&cp1_eth1 {
status = "okay";
phy = <&ge_phy>;
phy-mode = "sgmii";
};
-&cps_pinctl {
+&cp1_pinctl {
/*
* MPP Bus:
* [0-5] TDM
@@ -246,9 +246,9 @@
0xff 0xff 0xff>;
};
-&cps_spi1 {
+&cp1_spi1 {
pinctrl-names = "default";
- pinctrl-0 = <&cps_spi1_pins>;
+ pinctrl-0 = <&cp1_spi1_pins>;
status = "okay";
spi-flash@0 {
@@ -275,7 +275,7 @@
};
};
-&cps_comphy {
+&cp1_comphy {
/*
* CP1 Serdes Configuration:
* Lane 0: SGMII1
@@ -16,14 +16,14 @@
};
aliases {
- i2c0 = &i2c0;
- i2c1 = &cpm_i2c0;
- i2c2 = &cpm_i2c1;
+ i2c0 = &ap_i2c0;
+ i2c1 = &cp0_i2c0;
+ i2c2 = &cp0_i2c1;
i2c3 = &i2c_switch;
- spi0 = &spi0;
+ spi0 = &ap_spi0;
gpio0 = &ap_gpio0;
- gpio1 = &cpm_gpio0;
- gpio2 = &cpm_gpio1;
+ gpio1 = &cp0_gpio0;
+ gpio2 = &cp0_gpio1;
gpio3 = &sfpplus_gpio;
};
@@ -40,7 +40,7 @@
reg_usb3h0_vbus: usb3-vbus0 {
compatible = "regulator-fixed";
pinctrl-names = "default";
- pinctrl-0 = <&cpm_xhci_vbus_pins>;
+ pinctrl-0 = <&cp0_xhci_vbus_pins>;
regulator-name = "reg-usb3h0-vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
@@ -48,12 +48,12 @@
enable-active-high;
regulator-always-on;
regulator-boot-on;
- gpio = <&cpm_gpio1 15 GPIO_ACTIVE_HIGH>; /* GPIO[47] */
+ gpio = <&cp0_gpio1 15 GPIO_ACTIVE_HIGH>; /* GPIO[47] */
};
};
};
-&i2c0 {
+&ap_i2c0 {
status = "okay";
clock-frequency = <100000>;
@@ -83,7 +83,7 @@
0 3 0 0 0 0 0 0 0 3 >;
};
-&cpm_pinctl {
+&cp0_pinctl {
/*
* MPP Bus:
* [0-31] = 0xff: Keep default CP0_shared_pins:
@@ -118,35 +118,35 @@
0 0 0 0 0 0 0xe 0xe 0xe 0xe
0xe 0xe 0 >;
- cpm_xhci_vbus_pins: cpm-xhci-vbus-pins {
+ cp0_xhci_vbus_pins: cpm-xhci-vbus-pins {
marvell,pins = < 47 >;
marvell,function = <0>;
};
- cpm_pcie_reset_pins: cpm-pcie-reset-pins {
+ cp0_pcie_reset_pins: cpm-pcie-reset-pins {
marvell,pins = < 52 >;
marvell,function = <0>;
};
};
-&cpm_sdhci0 {
+&cp0_sdhci0 {
pinctrl-names = "default";
- pinctrl-0 = <&cpm_sdhci_pins>;
+ pinctrl-0 = <&cp0_sdhci_pins>;
bus-width= <4>;
status = "okay";
};
-&cpm_pcie0 {
+&cp0_pcie0 {
num-lanes = <1>;
pinctrl-names = "default";
- pinctrl-0 = <&cpm_pcie_reset_pins>;
- marvell,reset-gpio = <&cpm_gpio1 20 GPIO_ACTIVE_LOW>; /* GPIO[52] */
+ pinctrl-0 = <&cp0_pcie_reset_pins>;
+ marvell,reset-gpio = <&cp0_gpio1 20 GPIO_ACTIVE_LOW>; /* GPIO[52] */
status = "okay";
};
-&cpm_i2c0 {
+&cp0_i2c0 {
pinctrl-names = "default";
- pinctrl-0 = <&cpm_i2c0_pins>;
+ pinctrl-0 = <&cp0_i2c0_pins>;
status = "okay";
clock-frequency = <100000>;
@@ -158,9 +158,9 @@
};
};
-&cpm_i2c1 {
+&cp0_i2c1 {
pinctrl-names = "default";
- pinctrl-0 = <&cpm_i2c1_pins>;
+ pinctrl-0 = <&cp0_i2c1_pins>;
status = "okay";
clock-frequency = <100000>;
@@ -172,44 +172,44 @@
};
};
-&cpm_sata0 {
+&cp0_sata0 {
status = "okay";
};
-&cpm_ethernet {
+&cp0_ethernet {
pinctrl-names = "default";
status = "okay";
};
-&cpm_mdio {
+&cp0_mdio {
status = "okay";
- cpm_ge_phy0: ethernet-phy@1 {
+ cp0_ge_phy0: ethernet-phy@1 {
reg = <0>;
};
- cpm_ge_phy1: ethernet-phy@2 {
+ cp0_ge_phy1: ethernet-phy@2 {
reg = <1>;
};
};
-&cpm_eth0 {
+&cp0_eth0 {
status = "okay";
phy-mode = "sfi";
};
-&cpm_eth1 {
+&cp0_eth1 {
status = "okay";
phy-mode = "sgmii";
- phy = <&cpm_ge_phy0>;
+ phy = <&cp0_ge_phy0>;
};
-&cpm_eth2 {
+&cp0_eth2 {
status = "okay";
phy-mode = "sgmii";
- phy = <&cpm_ge_phy1>;
+ phy = <&cp0_ge_phy1>;
};
-&cpm_comphy {
+&cp0_comphy {
/*
* CP0 Serdes Configuration:
* Lane 0: PCIe0 (x1)
@@ -241,54 +241,54 @@
};
};
-&cps_mdio {
+&cp1_mdio {
status = "okay";
- cps_ge_phy0: ethernet-phy@3 {
+ cp1_ge_phy0: ethernet-phy@3 {
reg = <1>;
};
- cps_ge_phy1: ethernet-phy@4 {
+ cp1_ge_phy1: ethernet-phy@4 {
reg = <0>;
};
};
-&cps_pcie0 {
+&cp1_pcie0 {
num-lanes = <2>;
pinctrl-names = "default";
status = "okay";
};
-&cps_usb3_0 {
+&cp1_usb3_0 {
vbus-supply = <®_usb3h0_vbus>;
status = "okay";
};
-&cps_utmi0 {
+&cp1_utmi0 {
status = "okay";
};
-&cps_ethernet {
+&cp1_ethernet {
status = "okay";
};
-&cps_eth0 {
+&cp1_eth0 {
status = "okay";
phy-mode = "sfi";
};
-&cps_eth1 {
+&cp1_eth1 {
status = "okay";
- phy = <&cps_ge_phy0>;
+ phy = <&cp1_ge_phy0>;
phy-mode = "sgmii";
};
-&cps_eth2 {
+&cp1_eth2 {
status = "okay";
- phy = <&cps_ge_phy1>;
+ phy = <&cp1_ge_phy1>;
phy-mode = "sgmii";
};
-&cps_pinctl {
+&cp1_pinctl {
/*
* MPP Bus:
* [0-5] TDM
@@ -321,7 +321,7 @@
0xff 0xff 0xff>;
};
-&spi0 {
+&ap_spi0 {
status = "okay";
spi-flash@0 {
@@ -356,7 +356,7 @@
};
};
-&cps_comphy {
+&cp1_comphy {
/*
* CP1 Serdes Configuration:
* Lane 0: PCIe0 (x2)
@@ -1,43 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
- * Copyright (C) 2016 Marvell Technology Group Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPLv2 or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
+ * Copyright (C) 2016- 2021 Marvell International Ltd.
*/
/*
@@ -46,12 +9,80 @@
*/
#include <dt-bindings/gpio/gpio.h>
+#include "armada-common.dtsi"
+#include "armada-8k.dtsi"
#include "armada-ap806-quad.dtsi"
-#include "armada-cp110-master.dtsi"
-#include "armada-cp110-slave.dtsi"
+
+/* CP110-0 Settings */
+#define CP110_NAME cp0
+#define CP110_NUM 0
+
+#include "armada-cp110.dtsi"
+
+#undef CP110_NAME
+#undef CP110_NUM
+
+/* CP110-1 Settings */
+#define CP110_NAME cp1
+#define CP110_NUM 1
+
+#include "armada-cp110.dtsi"
+
+#undef CP110_NAME
+#undef CP110_NUM
+
/ {
model = "Marvell Armada 8040";
compatible = "marvell,armada8040", "marvell,armada-ap806-quad",
"marvell,armada-ap806";
};
+
+&cp0_pinctl {
+ compatible = "marvell,mvebu-pinctrl", "marvell,8k-cpm-pinctrl";
+ bank-name ="cp0-110";
+
+ cp0_i2c0_pins: cp0-i2c-pins-0 {
+ marvell,pins = < 37 38 >;
+ marvell,function = <2>;
+ };
+ cp0_i2c1_pins: cp0-i2c-pins-1 {
+ marvell,pins = < 35 36 >;
+ marvell,function = <2>;
+ };
+ cp0_ge1_rgmii_pins: cp0-ge-rgmii-pins-0 {
+ marvell,pins = < 0 1 2 3 4 5 6 7 8 9 10 11>;
+ marvell,function = <3>;
+ };
+ cp0_ge2_rgmii_pins: cp0-ge-rgmii-pins-1 {
+ marvell,pins = < 44 45 46 47 48 49 50 51
+ 52 53 54 55 >;
+ marvell,function = <1>;
+ };
+ cp0_pca0_pins: cp0-pca0_pins {
+ marvell,pins = <62>;
+ marvell,function = <0>;
+ };
+ cp0_sdhci_pins: cp0-sdhi-pins-0 {
+ marvell,pins = < 56 57 58 59 60 61 >;
+ marvell,function = <14>;
+ };
+ cp0_spi0_pins: cp0-spi-pins-0 {
+ marvell,pins = < 13 14 15 16 >;
+ marvell,function = <3>;
+ };
+};
+
+&cp1_pinctl {
+ compatible = "marvell,mvebu-pinctrl", "marvell,8k-cps-pinctrl";
+ bank-name ="cp1-110";
+
+ cp1_ge1_rgmii_pins: cp1-ge-rgmii-pins-0 {
+ marvell,pins = < 0 1 2 3 4 5 6 7 8 9 10 11 >;
+ marvell,function = <3>;
+ };
+ cp1_spi1_pins: cp1-spi-pins-1 {
+ marvell,pins = < 13 14 15 16 >;
+ marvell,function = <3>;
+ };
+};
new file mode 100644
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 - 2021 Marvell International Ltd.
+ */
+/* Common definitions used by Armada 8K DTs */
+
+/* This defines used to calculate the base address of each CP */
+#define CP110_BASE_OFFSET (0xf2000000)
+#define CP110_SPACE_SIZE (0x02000000)
+#define CP110_BASE (CP110_BASE_OFFSET + \
+ ((CP110_NUM % 2) * CP110_SPACE_SIZE))
+
+#define CP110_PCIE_MEM_SIZE(iface) (0xf00000)
+#define CP110_PCIEx_CPU_MEM_BASE(iface) \
+ (0xf6000000 + (CP110_NUM % 2) * 0x4000000 + (iface) * 0x1000000)
+#define CP110_PCIEx_BUS_MEM_BASE(iface) \
+ (CP110_PCIEx_CPU_MEM_BASE(iface))
+#define CP110_PCIE_BUS_MEM_CFG (0x82000000)
new file mode 100644
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2021 Marvell International Ltd.
+ */
+
+/* Common definitions used by Armada 7K/8K DTs */
+#define PASTER(x, y) x ## _ ## y
+#define EVALUATOR(x, y) PASTER(x, y)
+
+/* This define used to create die label:
+ * For example:
+ * CP110 master:
+ * CP110_LABEL(spi0) -> cp0_spi0
+ * CP110 slave:
+ * CP110_LABEL(usb0) -> cp1_usb0
+ */
+#define CP110_LABEL(name) EVALUATOR(CP110_NAME, name)
+
+#define APPEND_NX(A, B) A ##-## B
+#define APPEND(A, B) APPEND_NX(A, B)
+
+#define STRINGIZE_NX(x) #x
+#define STRINGIZE(x) STRINGIZE_NX(x)
+
+/* Same idea here, but this define convert the name to string:
+ * For example:
+ * master: CP110_STRING_LABEL(ppv2) -> "cp0-ppv2"
+ * slave: CP110_STRING_LABEL(ppv2) -> "cp1-ppv2"
+ */
+#define CP110_STRING_LABEL(name) STRINGIZE(APPEND(CP110_NAME, name))
deleted file mode 100644
@@ -1,368 +0,0 @@
-/*
- * Copyright (C) 2016 Marvell Technology Group Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPLv2 or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/*
- * Device Tree file for Marvell Armada CP110 Slave.
- */
-
-#include <dt-bindings/comphy/comphy_data.h>
-
-/ {
- cp110-slave {
- #address-cells = <2>;
- #size-cells = <2>;
- compatible = "simple-bus";
- interrupt-parent = <&gic>;
- ranges;
-
- config-space {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "simple-bus";
- interrupt-parent = <&gic>;
- ranges = <0x0 0x0 0xf4000000 0x2000000>;
-
- cps_ethernet: ethernet@0 {
- compatible = "marvell,armada-7k-pp22";
- reg = <0x0 0x100000>, <0x129000 0xb000>;
- clocks = <&cps_syscon0 1 3>, <&cps_syscon0 1 9>, <&cps_syscon0 1 5>;
- clock-names = "pp_clk", "gop_clk", "mg_clk";
- status = "disabled";
- dma-coherent;
-
- cps_eth0: eth0 {
- interrupts = <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>;
- port-id = <0>;
- gop-port-id = <0>;
- status = "disabled";
- };
-
- cps_eth1: eth1 {
- interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>;
- port-id = <1>;
- gop-port-id = <2>;
- status = "disabled";
- };
-
- cps_eth2: eth2 {
- interrupts = <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>;
- port-id = <2>;
- gop-port-id = <3>;
- status = "disabled";
- };
- };
-
- cps_mdio: mdio@12a200 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "marvell,orion-mdio";
- reg = <0x12a200 0x10>;
- device-name = "cps-mdio";
- };
-
- cps_xmdio: mdio@12a600 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "marvell,xmdio";
- reg = <0x12a600 0x16>;
- status = "disabled";
- device-name = "cps-xmdio";
- };
-
- cps_syscon0: system-controller@440000 {
- compatible = "marvell,cp110-system-controller0",
- "syscon";
- reg = <0x440000 0x1000>;
- #clock-cells = <2>;
- core-clock-output-names =
- "cps-apll", "cps-ppv2-core", "cps-eip",
- "cps-core", "cps-nand-core";
- gate-clock-output-names =
- "cps-audio", "cps-communit", "cps-nand",
- "cps-ppv2", "cps-sdio", "cps-mg-domain",
- "cps-mg-core", "cps-xor1", "cps-xor0",
- "cps-gop-dp", "none", "cps-pcie_x10",
- "cps-pcie_x11", "cps-pcie_x4", "cps-pcie-xor",
- "cps-sata", "cps-sata-usb", "cps-main",
- "cps-sd-mmc", "none", "none",
- "cps-slow-io", "cps-usb3h0", "cps-usb3h1",
- "cps-usb3dev", "cps-eip150", "cps-eip197";
- };
-
- cps_pinctl: cps-pinctl@440000 {
- compatible = "marvell,mvebu-pinctrl",
- "marvell,armada-8k-cps-pinctrl";
- bank-name ="cp1-110";
- reg = <0x440000 0x20>;
- pin-count = <63>;
- max-func = <0xf>;
-
- cps_ge1_rgmii_pins: cps-ge-rgmii-pins-0 {
- marvell,pins = < 0 1 2 3 4 5 6 7
- 8 9 10 11 >;
- marvell,function = <3>;
- };
- cps_spi1_pins: cps-spi-pins-1 {
- marvell,pins = < 13 14 15 16 >;
- marvell,function = <3>;
- };
- };
-
- cps_gpio0: gpio@440100 {
- compatible = "marvell,orion-gpio";
- reg = <0x440100 0x40>;
- ngpios = <32>;
- gpiobase = <20>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- cps_gpio1: gpio@440140 {
- compatible = "marvell,orion-gpio";
- reg = <0x440140 0x40>;
- ngpios = <31>;
- gpiobase = <52>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- cps_sata0: sata@540000 {
- compatible = "marvell,armada-8k-ahci";
- reg = <0x540000 0x30000>;
- interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cps_syscon0 1 15>;
- status = "disabled";
- };
-
- cps_usb3_0: usb3@500000 {
- compatible = "marvell,armada-8k-xhci",
- "generic-xhci";
- reg = <0x500000 0x4000>;
- dma-coherent;
- interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cps_syscon0 1 22>;
- status = "disabled";
- };
-
- cps_usb3_1: usb3@510000 {
- compatible = "marvell,armada-8k-xhci",
- "generic-xhci";
- reg = <0x510000 0x4000>;
- dma-coherent;
- interrupts = <GIC_SPI 285 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cps_syscon0 1 23>;
- status = "disabled";
- };
-
- cps_xor0: xor@6a0000 {
- compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
- reg = <0x6a0000 0x1000>,
- <0x6b0000 0x1000>;
- dma-coherent;
- msi-parent = <&gic_v2m0>;
- clocks = <&cps_syscon0 1 8>;
- };
-
- cps_xor1: xor@6c0000 {
- compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
- reg = <0x6c0000 0x1000>,
- <0x6d0000 0x1000>;
- dma-coherent;
- msi-parent = <&gic_v2m0>;
- clocks = <&cps_syscon0 1 7>;
- };
-
- cps_spi0: spi@700600 {
- compatible = "marvell,armada-380-spi";
- reg = <0x700600 0x50>;
- #address-cells = <0x1>;
- #size-cells = <0x0>;
- cell-index = <1>;
- clocks = <&cps_syscon0 0 3>;
- status = "disabled";
- };
-
- cps_spi1: spi@700680 {
- compatible = "marvell,armada-380-spi";
- reg = <0x700680 0x50>;
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <2>;
- clocks = <&cps_syscon0 1 21>;
- status = "disabled";
- };
-
- cps_i2c0: i2c@701000 {
- compatible = "marvell,mv78230-i2c";
- reg = <0x701000 0x20>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cps_syscon0 1 21>;
- status = "disabled";
- };
-
- cps_i2c1: i2c@701100 {
- compatible = "marvell,mv78230-i2c";
- reg = <0x701100 0x20>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cps_syscon0 1 21>;
- status = "disabled";
- };
-
- cps_comphy: comphy@441000 {
- compatible = "marvell,mvebu-comphy", "marvell,comphy-cp110";
- reg = <0x441000 0x8>,
- <0x120000 0x8>;
- mux-bitcount = <4>;
- max-lanes = <6>;
- };
-
- cps_utmi0: utmi@580000 {
- compatible = "marvell,mvebu-utmi-2.6.0";
- reg = <0x580000 0x1000>, /* utmi-unit */
- <0x440420 0x4>, /* usb-cfg */
- <0x440440 0x4>; /* utmi-cfg */
- utmi-port = <UTMI_PHY_TO_USB3_HOST0>;
- status = "disabled";
- };
-
- cps_nand: nand@720000 {
- compatible = "marvell,armada-8k-nand-controller",
- "marvell,armada370-nand-controller";
- reg = <0x720000 0x54>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "core", "reg";
- clocks = <&cps_syscon0 1 2>,
- <&cps_syscon0 1 17>;
- marvell,system-controller = <&cps_syscon0>;
- nand-enable-arbiter;
- num-cs = <1>;
- status = "disabled";
- };
- };
-
- cps_pcie0: pcie@f4600000 {
- compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
- reg = <0 0xf4600000 0 0x10000>,
- <0 0xfaf00000 0 0x80000>;
- reg-names = "ctrl", "config";
- #address-cells = <3>;
- #size-cells = <2>;
- #interrupt-cells = <1>;
- device_type = "pci";
- dma-coherent;
- msi-parent = <&gic_v2m0>;
-
- bus-range = <0 0xff>;
- ranges =
- /* downstream I/O */
- <0x81000000 0 0xfd000000 0 0xfd000000 0 0x10000
- /* non-prefetchable memory */
- 0x82000000 0 0xfa000000 0 0xfa000000 0 0xf00000>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
- interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
- num-lanes = <1>;
- clocks = <&cps_syscon0 1 13>;
- status = "disabled";
- };
-
- cps_pcie1: pcie@f4620000 {
- compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
- reg = <0 0xf4620000 0 0x10000>,
- <0 0xfbf00000 0 0x80000>;
- reg-names = "ctrl", "config";
- #address-cells = <3>;
- #size-cells = <2>;
- #interrupt-cells = <1>;
- device_type = "pci";
- dma-coherent;
- msi-parent = <&gic_v2m0>;
-
- bus-range = <0 0xff>;
- ranges =
- /* downstream I/O */
- <0x81000000 0 0xfd010000 0 0xfd010000 0 0x10000
- /* non-prefetchable memory */
- 0x82000000 0 0xfb000000 0 0xfb000000 0 0xf00000>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>;
- interrupts = <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>;
-
- num-lanes = <1>;
- clocks = <&cps_syscon0 1 11>;
- status = "disabled";
- };
-
- cps_pcie2: pcie@f4640000 {
- compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
- reg = <0 0xf4640000 0 0x10000>,
- <0 0xfcf00000 0 0x80000>;
- reg-names = "ctrl", "config";
- #address-cells = <3>;
- #size-cells = <2>;
- #interrupt-cells = <1>;
- device_type = "pci";
- dma-coherent;
- msi-parent = <&gic_v2m0>;
-
- bus-range = <0 0xff>;
- ranges =
- /* downstream I/O */
- <0x81000000 0 0xfd020000 0 0xfd020000 0 0x10000
- /* non-prefetchable memory */
- 0x82000000 0 0xfc000000 0 0xfc000000 0 0xf00000>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>;
- interrupts = <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>;
-
- num-lanes = <1>;
- clocks = <&cps_syscon0 1 12>;
- status = "disabled";
- };
- };
-};
similarity index 55%
rename from arch/arm/dts/armada-cp110-master.dtsi
rename to arch/arm/dts/armada-cp110.dtsi
@@ -1,53 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
- * Copyright (C) 2016 Marvell Technology Group Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPLv2 or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
+ * Copyright (C) 2016- 2021 Marvell International Ltd.
*/
/*
- * Device Tree file for Marvell Armada CP110 Master.
+ * Generic Device Tree describing Marvell Armada CP-110 device
*/
#include <dt-bindings/comphy/comphy_data.h>
+#define U64_TO_U32_H(addr) (((addr) >> 32) & 0xffffffff)
+#define U64_TO_U32_L(addr) ((addr) & 0xffffffff)
+
+#define CP110_PCIEx_REG0_BASE(iface) \
+ (CP110_BASE + 0x600000 + (iface) * 0x20000)
+#define CP110_PCIEx_REG1_BASE(iface) \
+ (CP110_PCIEx_CPU_MEM_BASE(iface) + CP110_PCIE_MEM_SIZE(iface))
+#define CP110_PCIE_EP_REG_BASE(iface) (CP110_BASE + 0x600000 + \
+ (iface) * 0x4000)
+
/ {
- cp110-master {
+ CP110_NAME {
#address-cells = <2>;
#size-cells = <2>;
compatible = "simple-bus";
@@ -59,56 +32,36 @@
#size-cells = <1>;
compatible = "simple-bus";
interrupt-parent = <&gic>;
- ranges = <0x0 0x0 0xf2000000 0x2000000>;
-
- cpm_ethernet: ethernet@0 {
- compatible = "marvell,armada-7k-pp22";
- reg = <0x0 0x100000>, <0x129000 0xb000>;
- clocks = <&cpm_syscon0 1 3>, <&cpm_syscon0 1 9>, <&cpm_syscon0 1 5>;
- clock-names = "pp_clk", "gop_clk", "mg_clk";
- status = "disabled";
- dma-coherent;
-
- cpm_eth0: eth0 {
- interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
- port-id = <0>;
- gop-port-id = <0>;
- status = "disabled";
- };
-
- cpm_eth1: eth1 {
- interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
- port-id = <1>;
- gop-port-id = <2>;
- status = "disabled";
- };
+ ranges = <0x0 U64_TO_U32_H(CP110_BASE) U64_TO_U32_L(CP110_BASE) 0x2000000>;
- cpm_eth2: eth2 {
- interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
- port-id = <2>;
- gop-port-id = <3>;
- status = "disabled";
- };
- };
-
- cpm_mdio: mdio@12a200 {
+ CP110_LABEL(mdio): mdio@12a200 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "marvell,orion-mdio";
reg = <0x12a200 0x10>;
- device-name = "cpm-mdio";
+ device-name = CP110_STRING_LABEL(mdio);
+ status = "disabled";
};
- cpm_xmdio: mdio@12a600 {
+ CP110_LABEL(xmdio): mdio@12a600 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "marvell,xmdio";
- reg = <0x12a600 0x16>;
+ reg = <0x12a600 0x200>;
+ device-name = CP110_STRING_LABEL(xmdio);
status = "disabled";
- device-name = "cpm-xmdio";
};
- cpm_syscon0: system-controller@440000 {
+ CP110_LABEL(sar-reg) {
+ compatible = "marvell,sample-at-reset-common",
+ "marvell,sample-at-reset-cp110";
+ reg = <0x400200 0x8>;
+ sar-driver = "cp110_sar";
+ sar-name = CP110_STRING_LABEL(sar);
+ status = "okay";
+ };
+
+ CP110_LABEL(syscon0): system-controller@440000 {
compatible = "marvell,cp110-system-controller0",
"syscon";
reg = <0x440000 0x1000>;
@@ -128,43 +81,14 @@
"cpm-usb3dev", "cpm-eip150", "cpm-eip197";
};
- cpm_pinctl: cpm-pinctl@440000 {
- compatible = "marvell,mvebu-pinctrl",
- "marvell,armada-7k-pinctrl",
- "marvell,armada-8k-cpm-pinctrl";
- bank-name ="cp0-110";
+ CP110_LABEL(pinctl): pinctl@440000 {
+ compatible = "marvell,mvebu-pinctrl";
reg = <0x440000 0x20>;
pin-count = <63>;
max-func = <0xf>;
-
- cpm_i2c0_pins: cpm-i2c-pins-0 {
- marvell,pins = < 37 38 >;
- marvell,function = <2>;
- };
- cpm_i2c1_pins: cpm-i2c-pins-1 {
- marvell,pins = < 35 36 >;
- marvell,function = <2>;
- };
- cpm_ge2_rgmii_pins: cpm-ge-rgmii-pins-0 {
- marvell,pins = < 44 45 46 47 48 49 50 51
- 52 53 54 55 >;
- marvell,function = <1>;
- };
- pca0_pins: cpm-pca0_pins {
- marvell,pins = <62>;
- marvell,function = <0>;
- };
- cpm_sdhci_pins: cpm-sdhi-pins-0 {
- marvell,pins = < 56 57 58 59 60 61 >;
- marvell,function = <14>;
- };
- cpm_spi0_pins: cpm-spi-pins-0 {
- marvell,pins = < 13 14 15 16 >;
- marvell,function = <3>;
- };
};
- cpm_gpio0: gpio@440100 {
+ CP110_LABEL(gpio0): gpio@440100 {
compatible = "marvell,orion-gpio";
reg = <0x440100 0x40>;
ngpios = <32>;
@@ -173,7 +97,7 @@
#gpio-cells = <2>;
};
- cpm_gpio1: gpio@440140 {
+ CP110_LABEL(gpio1): gpio@440140 {
compatible = "marvell,orion-gpio";
reg = <0x440140 0x40>;
ngpios = <31>;
@@ -182,75 +106,85 @@
#gpio-cells = <2>;
};
- cpm_sata0: sata@540000 {
+ CP110_LABEL(sata0): sata@540000 {
compatible = "marvell,armada-8k-ahci";
reg = <0x540000 0x30000>;
interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpm_syscon0 1 15>;
+ clocks = <&CP110_LABEL(syscon0) 1 15>;
status = "disabled";
};
- cpm_usb3_0: usb3@500000 {
+ CP110_LABEL(usb3_0): usb3@500000 {
compatible = "marvell,armada-8k-xhci",
"generic-xhci";
reg = <0x500000 0x4000>;
dma-coherent;
interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpm_syscon0 1 22>;
+ clocks = <&CP110_LABEL(syscon0) 1 22>;
status = "disabled";
};
- cpm_usb3_1: usb3@510000 {
+ CP110_LABEL(usb3_1): usb3@510000 {
compatible = "marvell,armada-8k-xhci",
"generic-xhci";
reg = <0x510000 0x4000>;
dma-coherent;
interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpm_syscon0 1 23>;
+ clocks = <&CP110_LABEL(syscon0) 1 23>;
status = "disabled";
};
- cpm_spi0: spi@700600 {
+ CP110_LABEL(spi0): spi@700600 {
compatible = "marvell,armada-380-spi";
reg = <0x700600 0x50>;
#address-cells = <0x1>;
#size-cells = <0x0>;
cell-index = <1>;
- clocks = <&cpm_syscon0 0 3>;
+ spi-max-frequency = <50000000>;
+ clocks = <&CP110_LABEL(syscon0) 0 3>;
status = "disabled";
};
- cpm_spi1: spi@700680 {
+ CP110_LABEL(spi1): spi@700680 {
compatible = "marvell,armada-380-spi";
reg = <0x700680 0x50>;
#address-cells = <1>;
#size-cells = <0>;
cell-index = <2>;
- clocks = <&cpm_syscon0 1 21>;
+ spi-max-frequency = <50000000>;
+ clocks = <&CP110_LABEL(syscon0) 1 21>;
status = "disabled";
};
- cpm_i2c0: i2c@701000 {
+ CP110_LABEL(i2c0): i2c@701000 {
compatible = "marvell,mv78230-i2c";
reg = <0x701000 0x20>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpm_syscon0 1 21>;
+ clocks = <&CP110_LABEL(syscon0) 1 21>;
status = "disabled";
};
- cpm_i2c1: i2c@701100 {
+ CP110_LABEL(i2c1): i2c@701100 {
compatible = "marvell,mv78230-i2c";
reg = <0x701100 0x20>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpm_syscon0 1 21>;
+ clocks = <&CP110_LABEL(syscon0) 1 21>;
+ status = "disabled";
+ };
+
+ CP110_LABEL(mss_i2c0): i2c@211000 {
+ compatible = "marvell,mv78230-i2c";
+ reg = <0x211000 0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
};
- cpm_comphy: comphy@441000 {
+ CP110_LABEL(comphy): comphy@441000 {
compatible = "marvell,mvebu-comphy", "marvell,comphy-cp110";
reg = <0x441000 0x8>,
<0x120000 0x8>;
@@ -258,7 +192,7 @@
max-lanes = <6>;
};
- cpm_utmi0: utmi@580000 {
+ CP110_LABEL(utmi0): utmi@580000 {
compatible = "marvell,mvebu-utmi-2.6.0";
reg = <0x580000 0x1000>, /* utmi-unit */
<0x440420 0x4>, /* usb-cfg */
@@ -267,7 +201,7 @@
status = "disabled";
};
- cpm_utmi1: utmi@581000 {
+ CP110_LABEL(utmi1): utmi@581000 {
compatible = "marvell,mvebu-utmi-2.6.0";
reg = <0x581000 0x1000>, /* utmi-unit */
<0x440420 0x4>, /* usb-cfg */
@@ -276,7 +210,7 @@
status = "disabled";
};
- cpm_sdhci0: sdhci@780000 {
+ CP110_LABEL(sdhci0): sdhci@780000 {
compatible = "marvell,armada-8k-sdhci";
reg = <0x780000 0x300>;
interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
@@ -284,28 +218,57 @@
status = "disabled";
};
- cpm_nand: nand@720000 {
+ CP110_LABEL(nand): nand@720000 {
compatible = "marvell,armada-8k-nand-controller",
"marvell,armada370-nand-controller";
reg = <0x720000 0x54>;
#address-cells = <1>;
#size-cells = <0>;
- interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "core", "reg";
- clocks = <&cpm_syscon0 1 2>,
- <&cpm_syscon0 1 17>;
- marvell,system-controller = <&cpm_syscon0>;
+ clocks = <&CP110_LABEL(syscon0) 1 2>;
nand-enable-arbiter;
num-cs = <1>;
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
status = "disabled";
};
+ CP110_LABEL(ethernet): ethernet@0 {
+ compatible = "marvell,armada-7k-pp22";
+ reg = <0x0 0x100000>, <0x129000 0xb000>;
+ clocks = <&CP110_LABEL(syscon0) 1 3>, <&CP110_LABEL(syscon0) 1 9>, <&CP110_LABEL(syscon0) 1 5>;
+ clock-names = "pp_clk", "gop_clk", "mg_clk";
+ status = "disabled";
+ dma-coherent;
+
+ CP110_LABEL(eth0): eth0 {
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ port-id = <0>;
+ gop-port-id = <0>;
+ status = "disabled";
+ };
+
+ CP110_LABEL(eth1): eth1 {
+ interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+ port-id = <1>;
+ gop-port-id = <2>;
+ status = "disabled";
+ };
+
+ CP110_LABEL(eth2): eth2 {
+ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+ port-id = <2>;
+ gop-port-id = <3>;
+ status = "disabled";
+ };
+ };
};
- cpm_pcie0: pcie@f2600000 {
+ CP110_LABEL(pcie0): pcie0@600000 {
compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
- reg = <0 0xf2600000 0 0x10000>,
- <0 0xf6f00000 0 0x80000>;
+ reg =
+ <U64_TO_U32_H(CP110_PCIEx_REG0_BASE(0)) U64_TO_U32_L(CP110_PCIEx_REG0_BASE(0)) 0 0x10000>,
+ /* Last 512KB of mem space */
+ <U64_TO_U32_H(CP110_PCIEx_REG1_BASE(0)) U64_TO_U32_L(CP110_PCIEx_REG1_BASE(0)) 0 0x80000>;
reg-names = "ctrl", "config";
#address-cells = <3>;
#size-cells = <2>;
@@ -315,22 +278,25 @@
bus-range = <0 0xff>;
ranges =
- /* downstream I/O */
- <0x81000000 0 0xf9000000 0 0xf9000000 0 0x10000
/* non-prefetchable memory */
- 0x82000000 0 0xf6000000 0 0xf6000000 0 0xf00000>;
+ <CP110_PCIE_BUS_MEM_CFG U64_TO_U32_H(CP110_PCIEx_BUS_MEM_BASE(0))
+ U64_TO_U32_L(CP110_PCIEx_BUS_MEM_BASE(0)) U64_TO_U32_H(CP110_PCIEx_CPU_MEM_BASE(0))
+ U64_TO_U32_L(CP110_PCIEx_CPU_MEM_BASE(0))
+ U64_TO_U32_H(CP110_PCIE_MEM_SIZE(0)) U64_TO_U32_L(CP110_PCIE_MEM_SIZE(0))>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
num-lanes = <1>;
- clocks = <&cpm_syscon0 1 13>;
+ clocks = <&CP110_LABEL(syscon0) 1 13>;
status = "disabled";
};
- cpm_pcie1: pcie@f2620000 {
+ CP110_LABEL(pcie1): pcie1@620000 {
compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
- reg = <0 0xf2620000 0 0x10000>,
- <0 0xf7f00000 0 0x80000>;
+ reg =
+ <U64_TO_U32_H(CP110_PCIEx_REG0_BASE(1)) U64_TO_U32_L(CP110_PCIEx_REG0_BASE(1)) 0 0x10000>,
+ /* Last 512KB of mem space */
+ <U64_TO_U32_H(CP110_PCIEx_REG1_BASE(1)) U64_TO_U32_L(CP110_PCIEx_REG1_BASE(1)) 0 0x80000>;
reg-names = "ctrl", "config";
#address-cells = <3>;
#size-cells = <2>;
@@ -340,23 +306,26 @@
bus-range = <0 0xff>;
ranges =
- /* downstream I/O */
- <0x81000000 0 0xf9010000 0 0xf9010000 0 0x10000
/* non-prefetchable memory */
- 0x82000000 0 0xf7000000 0 0xf7000000 0 0xf00000>;
+ <CP110_PCIE_BUS_MEM_CFG U64_TO_U32_H(CP110_PCIEx_BUS_MEM_BASE(1))
+ U64_TO_U32_L(CP110_PCIEx_BUS_MEM_BASE(1)) U64_TO_U32_H(CP110_PCIEx_CPU_MEM_BASE(1))
+ U64_TO_U32_L(CP110_PCIEx_CPU_MEM_BASE(1)) U64_TO_U32_H(CP110_PCIE_MEM_SIZE(1))
+ U64_TO_U32_L(CP110_PCIE_MEM_SIZE(1))>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
num-lanes = <1>;
- clocks = <&cpm_syscon0 1 11>;
+ clocks = <&CP110_LABEL(syscon0) 1 11>;
status = "disabled";
};
- cpm_pcie2: pcie@f2640000 {
+ CP110_LABEL(pcie2): pcie2@640000 {
compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
- reg = <0 0xf2640000 0 0x10000>,
- <0 0xf8f00000 0 0x80000>;
+ reg =
+ <U64_TO_U32_H(CP110_PCIEx_REG0_BASE(2)) U64_TO_U32_L(CP110_PCIEx_REG0_BASE(2)) 0 0x10000>,
+ /* Last 64KB of mem space */
+ <U64_TO_U32_H(CP110_PCIEx_REG1_BASE(2)) U64_TO_U32_L(CP110_PCIEx_REG1_BASE(2)) 0 0x80000>;
reg-names = "ctrl", "config";
#address-cells = <3>;
#size-cells = <2>;
@@ -366,16 +335,17 @@
bus-range = <0 0xff>;
ranges =
- /* downstream I/O */
- <0x81000000 0 0xf9020000 0 0xf9020000 0 0x10000
/* non-prefetchable memory */
- 0x82000000 0 0xf8000000 0 0xf8000000 0 0xf00000>;
+ <CP110_PCIE_BUS_MEM_CFG U64_TO_U32_H(CP110_PCIEx_BUS_MEM_BASE(2))
+ U64_TO_U32_L(CP110_PCIEx_BUS_MEM_BASE(2)) U64_TO_U32_H(CP110_PCIEx_CPU_MEM_BASE(2))
+ U64_TO_U32_L(CP110_PCIEx_CPU_MEM_BASE(2)) U64_TO_U32_H(CP110_PCIE_MEM_SIZE(2))
+ U64_TO_U32_L(CP110_PCIE_MEM_SIZE(2))>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
num-lanes = <1>;
- clocks = <&cpm_syscon0 1 12>;
+ clocks = <&CP110_LABEL(syscon0) 1 12>;
status = "disabled";
};
};