diff mbox series

[v2,02/23] phy: marvell: rename comphy related definitions to COMPHY_XX

Message ID 20210408075217.1087414-1-sr@denx.de
State Accepted
Commit 2dbba24088b8ef06aabee5df17ff7105ff259aca
Delegated to: Stefan Roese
Headers show
Series None | expand

Commit Message

Stefan Roese April 8, 2021, 7:52 a.m. UTC 
From: Igal Liberman <igall@marvell.com>

Currently, all comphy definitions are PHY_TYPE_XX and PHY_SPEEED_XX.
Those definition might be confused with MDIO PHY definitions.

This patch does the following changes:
 - PHY_TYPE_XX --> COMPHY_TYPE_XX
 - PHY_SPEED_XX --> COMPHY_SPEED_XX

This improves readability, no functional change.

Change-Id: I2bd1d9289ebbc5c16fa80f9870f797ea1bcaf5fa
Signed-off-by: Igal Liberman <igall@marvell.com>
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Cc: Pali Rohár <pali@kernel.org>
Cc: Marek Behun <marek.behun@nic.cz>
Cc: Konstantin Porotchkin <kostap@marvell.com>
---
v2:
- 3720-db & 3720-espressobin: Fix PHY0 & PHY1 to use USB on PHY0 and
  PEX on PHY1

 arch/arm/dts/armada-3720-db.dts             |   8 +-
 arch/arm/dts/armada-3720-espressobin.dts    |  12 +-
 arch/arm/dts/armada-3720-turris-mox.dts     |  12 +-
 arch/arm/dts/armada-3720-uDPU.dts           |  23 ++--
 arch/arm/dts/armada-7040-db-nand.dts        |  24 ++--
 arch/arm/dts/armada-7040-db.dts             |  22 ++--
 arch/arm/dts/armada-8040-clearfog-gt-8k.dts |  30 ++---
 arch/arm/dts/armada-8040-db.dts             |  24 ++--
 arch/arm/dts/armada-8040-mcbin.dts          |  27 +++--
 arch/arm/dts/armada-8040-puzzle-m801.dts    |  32 ++---
 arch/arm/dts/cn9130-crb-A.dts               |  16 +--
 arch/arm/dts/cn9130-crb-B.dts               |  16 +--
 board/CZ.NIC/turris_mox/turris_mox.c        |   8 +-
 drivers/phy/marvell/comphy_a3700.c          |  70 +++++------
 drivers/phy/marvell/comphy_core.c           |  14 +--
 drivers/phy/marvell/comphy_cp110.c          | 124 +++++++++++---------
 drivers/phy/marvell/comphy_mux.c            |  10 +-
 include/dt-bindings/comphy/comphy_data.h    |  90 +++++++-------
 18 files changed, 288 insertions(+), 274 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/dts/armada-3720-db.dts b/arch/arm/dts/armada-3720-db.dts
index 1b1b66b94de6..42e7ddd25c55 100644
--- a/arch/arm/dts/armada-3720-db.dts
+++ b/arch/arm/dts/armada-3720-db.dts
@@ -70,13 +70,13 @@ 
 
 &comphy {
 	phy0 {
-		phy-type = <PHY_TYPE_PEX0>;
-		phy-speed = <PHY_SPEED_2_5G>;
+		phy-type = <COMPHY_TYPE_USB3_HOST0>;
+		phy-speed = <COMPHY_SPEED_5G>;
 	};
 
 	phy1 {
-		phy-type = <PHY_TYPE_USB3_HOST0>;
-		phy-speed = <PHY_SPEED_5G>;
+		phy-type = <COMPHY_TYPE_PEX0>;
+		phy-speed = <COMPHY_SPEED_2_5G>;
 	};
 };
 
diff --git a/arch/arm/dts/armada-3720-espressobin.dts b/arch/arm/dts/armada-3720-espressobin.dts
index 96a4b3d95b88..d86d8f0b63cf 100644
--- a/arch/arm/dts/armada-3720-espressobin.dts
+++ b/arch/arm/dts/armada-3720-espressobin.dts
@@ -83,18 +83,18 @@ 
 &comphy {
 	max-lanes = <3>;
 	phy0 {
-		phy-type = <PHY_TYPE_USB3_HOST0>;
-		phy-speed = <PHY_SPEED_5G>;
+		phy-type = <COMPHY_TYPE_USB3_HOST0>;
+		phy-speed = <COMPHY_SPEED_5G>;
 	};
 
 	phy1 {
-		phy-type = <PHY_TYPE_PEX0>;
-		phy-speed = <PHY_SPEED_2_5G>;
+		phy-type = <COMPHY_TYPE_PEX0>;
+		phy-speed = <COMPHY_SPEED_2_5G>;
 	};
 
 	phy2 {
-		phy-type = <PHY_TYPE_SATA0>;
-		phy-speed = <PHY_SPEED_5G>;
+		phy-type = <COMPHY_TYPE_SATA0>;
+		phy-speed = <COMPHY_SPEED_5G>;
 	};
 };
 
diff --git a/arch/arm/dts/armada-3720-turris-mox.dts b/arch/arm/dts/armada-3720-turris-mox.dts
index 974270cc8c68..8e0ebf508d44 100644
--- a/arch/arm/dts/armada-3720-turris-mox.dts
+++ b/arch/arm/dts/armada-3720-turris-mox.dts
@@ -73,18 +73,18 @@ 
 &comphy {
 	max-lanes = <3>;
 	phy0 {
-		phy-type = <PHY_TYPE_SGMII1>;
-		phy-speed = <PHY_SPEED_3_125G>;
+		phy-type = <COMPHY_TYPE_SGMII1>;
+		phy-speed = <COMPHY_SPEED_3_125G>;
 	};
 
 	phy1 {
-		phy-type = <PHY_TYPE_PEX0>;
-		phy-speed = <PHY_SPEED_5G>;
+		phy-type = <COMPHY_TYPE_PEX0>;
+		phy-speed = <COMPHY_SPEED_5G>;
 	};
 
 	phy2 {
-		phy-type = <PHY_TYPE_USB3_HOST0>;
-		phy-speed = <PHY_SPEED_5G>;
+		phy-type = <COMPHY_TYPE_USB3_HOST0>;
+		phy-speed = <COMPHY_SPEED_5G>;
 	};
 };
 
diff --git a/arch/arm/dts/armada-3720-uDPU.dts b/arch/arm/dts/armada-3720-uDPU.dts
index 7f4b8222f4af..4b30f3cea8c7 100644
--- a/arch/arm/dts/armada-3720-uDPU.dts
+++ b/arch/arm/dts/armada-3720-uDPU.dts
@@ -108,18 +108,19 @@ 
 
 &comphy {
 	phy0 {
-		phy-type = <PHY_TYPE_SGMII1>;
-		phy-speed = <PHY_SPEED_3_125G>;
+		phy-type = <COMPHY_TYPE_SGMII1>;
+		phy-speed = <COMPHY_SPEED_1_25G>;
+	};
+
+	phy1 {
+		phy-type = <COMPHY_TYPE_SGMII0>;
+		phy-speed = <COMPHY_SPEED_1_25G>;
+	};
+
+	phy2 {
+		phy-type = <COMPHY_TYPE_USB3_HOST1>;
+		phy-speed = <COMPHY_SPEED_5G>;
 	};
-        phy1 {
-                phy-type = <PHY_TYPE_SGMII0>;
-                phy-speed = <PHY_SPEED_3_125G>;
-        };
-
-        phy2 {
-                phy-type = <PHY_TYPE_USB3_HOST1>;
-                phy-speed = <PHY_SPEED_5G>;
-        };
 };
 
 &eth0 {
diff --git a/arch/arm/dts/armada-7040-db-nand.dts b/arch/arm/dts/armada-7040-db-nand.dts
index f249c71f6561..ccf470b317f1 100644
--- a/arch/arm/dts/armada-7040-db-nand.dts
+++ b/arch/arm/dts/armada-7040-db-nand.dts
@@ -129,33 +129,33 @@ 
 
 &cp0_comphy {
 	phy0 {
-		phy-type = <PHY_TYPE_SGMII2>;
-		phy-speed = <PHY_SPEED_3_125G>;
+		phy-type = <COMPHY_TYPE_SGMII2>;
+		phy-speed = <COMPHY_SPEED_3_125G>;
 	};
 
 	phy1 {
-		phy-type = <PHY_TYPE_USB3_HOST0>;
-		phy-speed = <PHY_SPEED_5G>;
+		phy-type = <COMPHY_TYPE_USB3_HOST0>;
+		phy-speed = <COMPHY_SPEED_5G>;
 	};
 
 	phy2 {
-		phy-type = <PHY_TYPE_SGMII0>;
-		phy-speed = <PHY_SPEED_1_25G>;
+		phy-type = <COMPHY_TYPE_SGMII0>;
+		phy-speed = <COMPHY_SPEED_1_25G>;
 	};
 
 	phy3 {
-		phy-type = <PHY_TYPE_SATA1>;
-		phy-speed = <PHY_SPEED_5G>;
+		phy-type = <COMPHY_TYPE_SATA1>;
+		phy-speed = <COMPHY_SPEED_5G>;
 	};
 
 	phy4 {
-		phy-type = <PHY_TYPE_USB3_HOST1>;
-		phy-speed = <PHY_SPEED_5G>;
+		phy-type = <COMPHY_TYPE_USB3_HOST1>;
+		phy-speed = <COMPHY_SPEED_5G>;
 	};
 
 	phy5 {
-		phy-type = <PHY_TYPE_PEX2>;
-		phy-speed = <PHY_SPEED_5G>;
+		phy-type = <COMPHY_TYPE_PEX2>;
+		phy-speed = <COMPHY_SPEED_5G>;
 	};
 };
 
diff --git a/arch/arm/dts/armada-7040-db.dts b/arch/arm/dts/armada-7040-db.dts
index 6037f12f0e9f..f475fb361071 100644
--- a/arch/arm/dts/armada-7040-db.dts
+++ b/arch/arm/dts/armada-7040-db.dts
@@ -122,32 +122,32 @@ 
 
 &cp0_comphy {
 	phy0 {
-		phy-type = <PHY_TYPE_SGMII1>;
-		phy-speed = <PHY_SPEED_1_25G>;
+		phy-type = <COMPHY_TYPE_SGMII1>;
+		phy-speed = <COMPHY_SPEED_1_25G>;
 	};
 
 	phy1 {
-		phy-type = <PHY_TYPE_USB3_HOST0>;
-		phy-speed = <PHY_SPEED_5G>;
+		phy-type = <COMPHY_TYPE_USB3_HOST0>;
+		phy-speed = <COMPHY_SPEED_5G>;
 	};
 
 	phy2 {
-		phy-type = <PHY_TYPE_SFI>;
+		phy-type = <COMPHY_TYPE_SFI>;
 	};
 
 	phy3 {
-		phy-type = <PHY_TYPE_SATA1>;
-		phy-speed = <PHY_SPEED_5G>;
+		phy-type = <COMPHY_TYPE_SATA1>;
+		phy-speed = <COMPHY_SPEED_5G>;
 	};
 
 	phy4 {
-		phy-type = <PHY_TYPE_USB3_HOST1>;
-		phy-speed = <PHY_SPEED_5G>;
+		phy-type = <COMPHY_TYPE_USB3_HOST1>;
+		phy-speed = <COMPHY_SPEED_5G>;
 	};
 
 	phy5 {
-		phy-type = <PHY_TYPE_PEX2>;
-		phy-speed = <PHY_SPEED_5G>;
+		phy-type = <COMPHY_TYPE_PEX2>;
+		phy-speed = <COMPHY_SPEED_5G>;
 	};
 };
 
diff --git a/arch/arm/dts/armada-8040-clearfog-gt-8k.dts b/arch/arm/dts/armada-8040-clearfog-gt-8k.dts
index 86df6ac0b202..ce5832c2fbd7 100644
--- a/arch/arm/dts/armada-8040-clearfog-gt-8k.dts
+++ b/arch/arm/dts/armada-8040-clearfog-gt-8k.dts
@@ -160,22 +160,22 @@ 
 	 * Lane 5: Not connected
 	 */
 	phy0 {
-		phy-type = <PHY_TYPE_PEX0>;
+		phy-type = <COMPHY_TYPE_PEX0>;
 	};
 	phy1 {
-		phy-type = <PHY_TYPE_UNCONNECTED>;
+		phy-type = <COMPHY_TYPE_UNCONNECTED>;
 	};
 	phy2 {
-		phy-type = <PHY_TYPE_SFI>;
+		phy-type = <COMPHY_TYPE_SFI>;
 	};
 	phy3 {
-		phy-type = <PHY_TYPE_UNCONNECTED>;
+		phy-type = <COMPHY_TYPE_UNCONNECTED>;
 	};
 	phy4 {
-		phy-type = <PHY_TYPE_USB3_HOST1>;
+		phy-type = <COMPHY_TYPE_USB3_HOST1>;
 	};
 	phy5 {
-		phy-type = <PHY_TYPE_UNCONNECTED>;
+		phy-type = <COMPHY_TYPE_UNCONNECTED>;
 	};
 };
 
@@ -272,25 +272,25 @@ 
 	 * Lane 5: SGMII2 - Connected to Topaz switch
 	 */
 	phy0 {
-		phy-type = <PHY_TYPE_SATA1>;
-		phy-invert = <PHY_POLARITY_RXD_INVERT>;
+		phy-type = <COMPHY_TYPE_SATA1>;
+		phy-invert = <COMPHY_POLARITY_RXD_INVERT>;
 	};
 	phy1 {
-		phy-type = <PHY_TYPE_UNCONNECTED>;
+		phy-type = <COMPHY_TYPE_UNCONNECTED>;
 	};
 	phy2 {
-		phy-type = <PHY_TYPE_USB3_HOST0>;
+		phy-type = <COMPHY_TYPE_USB3_HOST0>;
 	};
 	phy3 {
-		phy-type = <PHY_TYPE_SGMII1>;
-		phy-speed = <PHY_SPEED_1_25G>;
+		phy-type = <COMPHY_TYPE_SGMII1>;
+		phy-speed = <COMPHY_SPEED_1_25G>;
 	};
 	phy4 {
-		phy-type = <PHY_TYPE_UNCONNECTED>;
+		phy-type = <COMPHY_TYPE_UNCONNECTED>;
 	};
 	phy5 {
-		phy-type = <PHY_TYPE_SGMII2>;
-		phy-speed = <PHY_SPEED_3_125G>;
+		phy-type = <COMPHY_TYPE_SGMII2>;
+		phy-speed = <COMPHY_SPEED_3_125G>;
 	};
 };
 
diff --git a/arch/arm/dts/armada-8040-db.dts b/arch/arm/dts/armada-8040-db.dts
index a2b7c992a406..1edfaab682eb 100644
--- a/arch/arm/dts/armada-8040-db.dts
+++ b/arch/arm/dts/armada-8040-db.dts
@@ -89,22 +89,22 @@ 
 	 *	Lane 5: PCIe2 (x1)
 	 */
 	phy0 {
-		phy-type = <PHY_TYPE_PEX0>;
+		phy-type = <COMPHY_TYPE_PEX0>;
 	};
 	phy1 {
-		phy-type = <PHY_TYPE_SATA0>;
+		phy-type = <COMPHY_TYPE_SATA0>;
 	};
 	phy2 {
-		phy-type = <PHY_TYPE_SFI>;
+		phy-type = <COMPHY_TYPE_SFI>;
 	};
 	phy3 {
-		phy-type = <PHY_TYPE_SATA1>;
+		phy-type = <COMPHY_TYPE_SATA1>;
 	};
 	phy4 {
-		phy-type = <PHY_TYPE_USB3_HOST1>;
+		phy-type = <COMPHY_TYPE_USB3_HOST1>;
 	};
 	phy5 {
-		phy-type = <PHY_TYPE_PEX2>;
+		phy-type = <COMPHY_TYPE_PEX2>;
 	};
 };
 
@@ -188,22 +188,22 @@ 
 	 *	Lane 5: PCIe2 (x1)
 	 */
 	phy0 {
-		phy-type = <PHY_TYPE_PEX0>;
+		phy-type = <COMPHY_TYPE_PEX0>;
 	};
 	phy1 {
-		phy-type = <PHY_TYPE_SATA0>;
+		phy-type = <COMPHY_TYPE_SATA0>;
 	};
 	phy2 {
-		phy-type = <PHY_TYPE_SFI>;
+		phy-type = <COMPHY_TYPE_SFI>;
 	};
 	phy3 {
-		phy-type = <PHY_TYPE_SATA1>;
+		phy-type = <COMPHY_TYPE_SATA1>;
 	};
 	phy4 {
-		phy-type = <PHY_TYPE_PEX1>;
+		phy-type = <COMPHY_TYPE_PEX1>;
 	};
 	phy5 {
-		phy-type = <PHY_TYPE_PEX2>;
+		phy-type = <COMPHY_TYPE_PEX2>;
 	};
 };
 
diff --git a/arch/arm/dts/armada-8040-mcbin.dts b/arch/arm/dts/armada-8040-mcbin.dts
index b0a36e328bc9..98a582df26fe 100644
--- a/arch/arm/dts/armada-8040-mcbin.dts
+++ b/arch/arm/dts/armada-8040-mcbin.dts
@@ -171,22 +171,22 @@ 
 	 * Lane 5: SATA1
 	 */
 	phy0 {
-		phy-type = <PHY_TYPE_PEX0>;
+		phy-type = <COMPHY_TYPE_PEX0>;
 	};
 	phy1 {
-		phy-type = <PHY_TYPE_PEX0>;
+		phy-type = <COMPHY_TYPE_PEX0>;
 	};
 	phy2 {
-		phy-type = <PHY_TYPE_PEX0>;
+		phy-type = <COMPHY_TYPE_PEX0>;
 	};
 	phy3 {
-		phy-type = <PHY_TYPE_PEX0>;
+		phy-type = <COMPHY_TYPE_PEX0>;
 	};
 	phy4 {
-		phy-type = <PHY_TYPE_SFI>;
+		phy-type = <COMPHY_TYPE_SFI>;
 	};
 	phy5 {
-		phy-type = <PHY_TYPE_SATA1>;
+		phy-type = <COMPHY_TYPE_SATA1>;
 	};
 };
 
@@ -286,22 +286,23 @@ 
 	 * Lane 5: SGMII3
 	 */
 	phy0 {
-		phy-type = <PHY_TYPE_SGMII1>;
-		phy-speed = <PHY_SPEED_1_25G>;
+		phy-type = <COMPHY_TYPE_SGMII1>;
+		phy-speed = <COMPHY_SPEED_1_25G>;
 	};
 	phy1 {
-		phy-type = <PHY_TYPE_SATA0>;
+		phy-type = <COMPHY_TYPE_SATA0>;
 	};
 	phy2 {
-		phy-type = <PHY_TYPE_USB3_HOST0>;
+		phy-type = <COMPHY_TYPE_USB3_HOST0>;
 	};
 	phy3 {
-		phy-type = <PHY_TYPE_SATA1>;
+		phy-type = <COMPHY_TYPE_SATA1>;
 	};
 	phy4 {
-		phy-type = <PHY_TYPE_SFI>;
+		phy-type = <COMPHY_TYPE_SFI>;
 	};
 	phy5 {
-		phy-type = <PHY_TYPE_SGMII3>;
+		phy-type = <COMPHY_TYPE_SGMII3>;
+		phy-speed = <COMPHY_SPEED_3_125G>;
 	};
 };
diff --git a/arch/arm/dts/armada-8040-puzzle-m801.dts b/arch/arm/dts/armada-8040-puzzle-m801.dts
index ff46ce50cbc7..0becc4ff0d34 100644
--- a/arch/arm/dts/armada-8040-puzzle-m801.dts
+++ b/arch/arm/dts/armada-8040-puzzle-m801.dts
@@ -220,24 +220,24 @@ 
 	 * Lane 5: SATA1
 	 */
 	phy0 {
-		phy-type = <PHY_TYPE_PEX0>;
+		phy-type = <COMPHY_TYPE_PEX0>;
 	};
 	phy1 {
-		phy-type = <PHY_TYPE_SGMII2>;
-		phy-speed = <PHY_SPEED_1_25G>;
+		phy-type = <COMPHY_TYPE_SGMII2>;
+		phy-speed = <COMPHY_SPEED_1_25G>;
 	};
 	phy2 {
-		phy-type = <PHY_TYPE_SATA0>;
+		phy-type = <COMPHY_TYPE_SATA0>;
 	};
 	phy3 {
-		phy-type = <PHY_TYPE_SGMII1>;
-		phy-speed = <PHY_SPEED_1_25G>;
+		phy-type = <COMPHY_TYPE_SGMII1>;
+		phy-speed = <COMPHY_SPEED_1_25G>;
 	};
 	phy4 {
-		phy-type = <PHY_TYPE_SFI>;
+		phy-type = <COMPHY_TYPE_SFI>;
 	};
 	phy5 {
-		phy-type = <PHY_TYPE_SATA1>;
+		phy-type = <COMPHY_TYPE_SATA1>;
 	};
 };
 
@@ -367,23 +367,23 @@ 
 	 * Lane 5: SGMII2
 	 */
 	phy0 {
-		phy-type = <PHY_TYPE_PEX0>;
+		phy-type = <COMPHY_TYPE_PEX0>;
 	};
 	phy1 {
-		phy-type = <PHY_TYPE_PEX0>;
+		phy-type = <COMPHY_TYPE_PEX0>;
 	};
 	phy2 {
-		phy-type = <PHY_TYPE_USB3_HOST0>;
+		phy-type = <COMPHY_TYPE_USB3_HOST0>;
 	};
 	phy3 {
-		phy-type = <PHY_TYPE_SGMII1>;
-		phy-speed = <PHY_SPEED_1_25G>;
+		phy-type = <COMPHY_TYPE_SGMII1>;
+		phy-speed = <COMPHY_SPEED_1_25G>;
 	};
 	phy4 {
-		phy-type = <PHY_TYPE_SFI>;
+		phy-type = <COMPHY_TYPE_SFI>;
 	};
 	phy5 {
-		phy-type = <PHY_TYPE_SGMII2>;
-		phy-speed = <PHY_SPEED_1_25G>;
+		phy-type = <COMPHY_TYPE_SGMII2>;
+		phy-speed = <COMPHY_SPEED_1_25G>;
 	};
 };
diff --git a/arch/arm/dts/cn9130-crb-A.dts b/arch/arm/dts/cn9130-crb-A.dts
index fa21ef314cba..5c5e0fb2eb1e 100644
--- a/arch/arm/dts/cn9130-crb-A.dts
+++ b/arch/arm/dts/cn9130-crb-A.dts
@@ -15,29 +15,29 @@ 
 
 &cp0_comphy {
 	phy0 {
-		phy-type = <PHY_TYPE_PEX0>;
+		phy-type = <COMPHY_TYPE_PEX0>;
 	};
 
 	phy1 {
-		phy-type = <PHY_TYPE_PEX0>;
+		phy-type = <COMPHY_TYPE_PEX0>;
 	};
 
 	phy2 {
-		phy-type = <PHY_TYPE_PEX0>;
+		phy-type = <COMPHY_TYPE_PEX0>;
 	};
 
 	phy3 {
-		phy-type = <PHY_TYPE_PEX0>;
+		phy-type = <COMPHY_TYPE_PEX0>;
 	};
 
 	phy4 {
-		phy-type = <PHY_TYPE_SFI>;
-		phy-speed = <PHY_SPEED_10_3125G>;
+		phy-type = <COMPHY_TYPE_SFI>;
+		phy-speed = <COMPHY_SPEED_10_3125G>;
 	};
 
 	phy5 {
-		phy-type = <PHY_TYPE_SGMII2>;
-		phy-speed = <PHY_SPEED_3_125G>;
+		phy-type = <COMPHY_TYPE_SGMII2>;
+		phy-speed = <COMPHY_SPEED_3_125G>;
 	};
 };
 
diff --git a/arch/arm/dts/cn9130-crb-B.dts b/arch/arm/dts/cn9130-crb-B.dts
index 7cb587ada826..6041084a2c87 100644
--- a/arch/arm/dts/cn9130-crb-B.dts
+++ b/arch/arm/dts/cn9130-crb-B.dts
@@ -15,29 +15,29 @@ 
 
 &cp0_comphy {
 	phy0 {
-		phy-type = <PHY_TYPE_PEX0>;
+		phy-type = <COMPHY_TYPE_PEX0>;
 	};
 
 	phy1 {
-		phy-type = <PHY_TYPE_USB3_HOST0>;
+		phy-type = <COMPHY_TYPE_USB3_HOST0>;
 	};
 
 	phy2 {
-		phy-type = <PHY_TYPE_SATA0>;
+		phy-type = <COMPHY_TYPE_SATA0>;
 	};
 
 	phy3 {
-		phy-type = <PHY_TYPE_USB3_HOST1>;
+		phy-type = <COMPHY_TYPE_USB3_HOST1>;
 	};
 
 	phy4 {
-		phy-type = <PHY_TYPE_SFI>;
-		phy-speed = <PHY_SPEED_10_3125G>;
+		phy-type = <COMPHY_TYPE_SFI>;
+		phy-speed = <COMPHY_SPEED_10_3125G>;
 	};
 
 	phy5 {
-		phy-type = <PHY_TYPE_SGMII2>;
-		phy-speed = <PHY_SPEED_3_125G>;
+		phy-type = <COMPHY_TYPE_SGMII2>;
+		phy-speed = <COMPHY_SPEED_3_125G>;
 	};
 };
 
diff --git a/board/CZ.NIC/turris_mox/turris_mox.c b/board/CZ.NIC/turris_mox/turris_mox.c
index 486680a49e88..15cbf92550e6 100644
--- a/board/CZ.NIC/turris_mox/turris_mox.c
+++ b/board/CZ.NIC/turris_mox/turris_mox.c
@@ -216,13 +216,13 @@  int comphy_update_map(struct comphy_map *serdes_map, int count)
 
 	if (sfpindex >= 0 && swindex >= 0) {
 		if (sfpindex < swindex)
-			serdes_map[0].speed = PHY_SPEED_1_25G;
+			serdes_map[0].speed = COMPHY_SPEED_1_25G;
 		else
-			serdes_map[0].speed = PHY_SPEED_3_125G;
+			serdes_map[0].speed = COMPHY_SPEED_3_125G;
 	} else if (sfpindex >= 0) {
-		serdes_map[0].speed = PHY_SPEED_1_25G;
+		serdes_map[0].speed = COMPHY_SPEED_1_25G;
 	} else if (swindex >= 0) {
-		serdes_map[0].speed = PHY_SPEED_3_125G;
+		serdes_map[0].speed = COMPHY_SPEED_3_125G;
 	}
 
 	return 0;
diff --git a/drivers/phy/marvell/comphy_a3700.c b/drivers/phy/marvell/comphy_a3700.c
index 12523d18a805..06822d1d12e0 100644
--- a/drivers/phy/marvell/comphy_a3700.c
+++ b/drivers/phy/marvell/comphy_a3700.c
@@ -17,33 +17,33 @@ 
 DECLARE_GLOBAL_DATA_PTR;
 
 struct comphy_mux_data a3700_comphy_mux_data[] = {
-/* Lane 0 */
+	/* Lane 0 */
 	{
 		4,
 		{
-			{ PHY_TYPE_UNCONNECTED,	0x0 },
-			{ PHY_TYPE_SGMII1,	0x0 },
-			{ PHY_TYPE_USB3_HOST0,	0x1 },
-			{ PHY_TYPE_USB3_DEVICE,	0x1 }
+			{ COMPHY_TYPE_UNCONNECTED,	0x0 },
+			{ COMPHY_TYPE_SGMII1,	0x0 },
+			{ COMPHY_TYPE_USB3_HOST0,	0x1 },
+			{ COMPHY_TYPE_USB3_DEVICE,	0x1 }
 		}
 	},
-/* Lane 1 */
+	/* Lane 1 */
 	{
 		3,
 		{
-			{ PHY_TYPE_UNCONNECTED,	0x0},
-			{ PHY_TYPE_SGMII0,	0x0},
-			{ PHY_TYPE_PEX0,	0x1}
+			{ COMPHY_TYPE_UNCONNECTED,	0x0},
+			{ COMPHY_TYPE_SGMII0,	0x0},
+			{ COMPHY_TYPE_PEX0,	0x1}
 		}
 	},
-/* Lane 2 */
+	/* Lane 2 */
 	{
 		4,
 		{
-			{ PHY_TYPE_UNCONNECTED,	0x0},
-			{ PHY_TYPE_SATA0,	0x0},
-			{ PHY_TYPE_USB3_HOST0,	0x1},
-			{ PHY_TYPE_USB3_DEVICE,	0x1}
+			{ COMPHY_TYPE_UNCONNECTED,	0x0},
+			{ COMPHY_TYPE_SATA0,	0x0},
+			{ COMPHY_TYPE_USB3_HOST0,	0x1},
+			{ COMPHY_TYPE_USB3_DEVICE,	0x1}
 		}
 	},
 };
@@ -228,10 +228,10 @@  static int comphy_pcie_power_up(u32 speed, u32 invert)
 	/*
 	 * 10. Check the Polarity invert bit
 	 */
-	if (invert & PHY_POLARITY_TXD_INVERT)
+	if (invert & COMPHY_POLARITY_TXD_INVERT)
 		reg_set16(phy_addr(PCIE, SYNC_PATTERN), phy_txd_inv, 0);
 
-	if (invert & PHY_POLARITY_RXD_INVERT)
+	if (invert & COMPHY_POLARITY_RXD_INVERT)
 		reg_set16(phy_addr(PCIE, SYNC_PATTERN), phy_rxd_inv, 0);
 
 	/*
@@ -284,10 +284,10 @@  static int comphy_sata_power_up(u32 invert)
 	/*
 	 * 0. Check the Polarity invert bits
 	 */
-	if (invert & PHY_POLARITY_TXD_INVERT)
+	if (invert & COMPHY_POLARITY_TXD_INVERT)
 		data |= bs_txd_inv;
 
-	if (invert & PHY_POLARITY_RXD_INVERT)
+	if (invert & COMPHY_POLARITY_RXD_INVERT)
 		data |= bs_rxd_inv;
 
 	reg_set_indirect(vphy_sync_pattern_reg, data, bs_txd_inv | bs_rxd_inv);
@@ -465,10 +465,10 @@  static int comphy_usb3_power_up(u32 lane, u32 type, u32 speed, u32 invert)
 	/*
 	 * 9. Check the Polarity invert bit
 	 */
-	if (invert & PHY_POLARITY_TXD_INVERT)
+	if (invert & COMPHY_POLARITY_TXD_INVERT)
 		usb3_reg_set16(SYNC_PATTERN, phy_txd_inv, 0, lane);
 
-	if (invert & PHY_POLARITY_RXD_INVERT)
+	if (invert & COMPHY_POLARITY_RXD_INVERT)
 		usb3_reg_set16(SYNC_PATTERN, phy_rxd_inv, 0, lane);
 
 	/*
@@ -513,7 +513,7 @@  static int comphy_usb3_power_up(u32 lane, u32 type, u32 speed, u32 invert)
 	 * Set Soft ID for Host mode (Device mode works with Hard ID
 	 * detection)
 	 */
-	if (type == PHY_TYPE_USB3_HOST0) {
+	if (type == COMPHY_TYPE_USB3_HOST0) {
 		/*
 		 * set   BIT0: set ID_MODE of Host/Device = "Soft ID" (BIT1)
 		 * clear BIT1: set SOFT_ID = Host
@@ -685,8 +685,8 @@  static void comphy_sgmii_phy_init(u32 lane, u32 speed)
 		 * comparison to 3.125 Gbps values. These register values are
 		 * stored in "sgmii_phy_init_fix" array.
 		 */
-		if ((speed != PHY_SPEED_1_25G) &&
-		    (sgmii_phy_init_fix[fix_idx].addr == addr)) {
+		if (speed != COMPHY_SPEED_1_25G &&
+		    sgmii_phy_init_fix[fix_idx].addr == addr) {
 			/* Use new value */
 			val = sgmii_phy_init_fix[fix_idx].value;
 			if (fix_idx < fix_arr_sz)
@@ -737,13 +737,13 @@  static int comphy_sgmii_power_up(u32 lane, u32 speed, u32 invert)
 	 * 7. Set PIN_PHY_GEN_TX[3:0] and PIN_PHY_GEN_RX[3:0] to decide
 	 *    COMPHY bit rate
 	 */
-	if (speed == PHY_SPEED_3_125G) { /* 3.125 GHz */
+	if (speed == COMPHY_SPEED_3_125G) { /* 3.125 GHz */
 		reg_set(COMPHY_PHY_CFG1_ADDR(lane),
 			(0x8 << rf_gen_rx_sel_shift) |
 			(0x8 << rf_gen_tx_sel_shift),
 			rf_gen_rx_select | rf_gen_tx_select);
 
-	} else if (speed == PHY_SPEED_1_25G) { /* 1.25 GHz */
+	} else if (speed == COMPHY_SPEED_1_25G) { /* 1.25 GHz */
 		reg_set(COMPHY_PHY_CFG1_ADDR(lane),
 			(0x6 << rf_gen_rx_sel_shift) |
 			(0x6 << rf_gen_tx_sel_shift),
@@ -819,7 +819,7 @@  static int comphy_sgmii_power_up(u32 lane, u32 speed, u32 invert)
 	 *     registers are OK.
 	 */
 	debug("Running C-DPI phy init %s mode\n",
-	      speed == PHY_SPEED_3_125G ? "2G5" : "1G");
+	      speed == COMPHY_SPEED_3_125G ? "2G5" : "1G");
 	if (get_ref_clk() == 40)
 		comphy_sgmii_phy_init(lane, speed);
 
@@ -837,10 +837,10 @@  static int comphy_sgmii_power_up(u32 lane, u32 speed, u32 invert)
 	/*
 	 * 18. Check the PHY Polarity invert bit
 	 */
-	if (invert & PHY_POLARITY_TXD_INVERT)
+	if (invert & COMPHY_POLARITY_TXD_INVERT)
 		reg_set16(sgmiiphy_addr(lane, SYNC_PATTERN), phy_txd_inv, 0);
 
-	if (invert & PHY_POLARITY_RXD_INVERT)
+	if (invert & COMPHY_POLARITY_RXD_INVERT)
 		reg_set16(sgmiiphy_addr(lane, SYNC_PATTERN), phy_rxd_inv, 0);
 
 	/*
@@ -976,30 +976,30 @@  int comphy_a3700_init(struct chip_serdes_phy_config *chip_cfg,
 		      comphy_map->type, comphy_map->invert);
 
 		switch (comphy_map->type) {
-		case PHY_TYPE_UNCONNECTED:
+		case COMPHY_TYPE_UNCONNECTED:
 			continue;
 			break;
 
-		case PHY_TYPE_PEX0:
+		case COMPHY_TYPE_PEX0:
 			ret = comphy_pcie_power_up(comphy_map->speed,
 						   comphy_map->invert);
 			break;
 
-		case PHY_TYPE_USB3_HOST0:
-		case PHY_TYPE_USB3_DEVICE:
+		case COMPHY_TYPE_USB3_HOST0:
+		case COMPHY_TYPE_USB3_DEVICE:
 			ret = comphy_usb3_power_up(lane,
 						   comphy_map->type,
 						   comphy_map->speed,
 						   comphy_map->invert);
 			break;
 
-		case PHY_TYPE_SGMII0:
-		case PHY_TYPE_SGMII1:
+		case COMPHY_TYPE_SGMII0:
+		case COMPHY_TYPE_SGMII1:
 			ret = comphy_sgmii_power_up(lane, comphy_map->speed,
 						    comphy_map->invert);
 			break;
 
-		case PHY_TYPE_SATA0:
+		case COMPHY_TYPE_SATA0:
 			ret = comphy_sata_power_up(comphy_map->invert);
 			break;
 
diff --git a/drivers/phy/marvell/comphy_core.c b/drivers/phy/marvell/comphy_core.c
index cffceb1395bb..f1f061d7c116 100644
--- a/drivers/phy/marvell/comphy_core.c
+++ b/drivers/phy/marvell/comphy_core.c
@@ -29,7 +29,7 @@  static const char *get_speed_string(u32 speed)
 		"6.25 Gbps", "10.31 Gbps"
 	};
 
-	if (speed < 0 || speed > PHY_SPEED_MAX)
+	if (speed < 0 || speed > COMPHY_SPEED_MAX)
 		return "invalid";
 
 	return speed_strings[speed];
@@ -46,7 +46,7 @@  static const char *get_type_string(u32 type)
 		"RXAUI0", "RXAUI1", "SFI", "IGNORE"
 	};
 
-	if (type < 0 || type > PHY_TYPE_MAX)
+	if (type < 0 || type > COMPHY_TYPE_MAX)
 		return "invalid";
 
 	return type_strings[type];
@@ -59,7 +59,7 @@  void comphy_print(struct chip_serdes_phy_config *chip_cfg,
 
 	for (lane = 0; lane < chip_cfg->comphy_lanes_count;
 	     lane++, comphy_map_data++) {
-		if (comphy_map_data->speed == PHY_SPEED_INVALID) {
+		if (comphy_map_data->speed == COMPHY_SPEED_INVALID) {
 			printf("Comphy-%d: %-13s\n", lane,
 			       get_type_string(comphy_map_data->type));
 		} else {
@@ -136,16 +136,16 @@  static int comphy_probe(struct udevice *dev)
 			continue;
 
 		comphy_map_data[lane].speed = fdtdec_get_int(
-			blob, subnode, "phy-speed", PHY_TYPE_INVALID);
+			blob, subnode, "phy-speed", COMPHY_TYPE_INVALID);
 		comphy_map_data[lane].type = fdtdec_get_int(
-			blob, subnode, "phy-type", PHY_SPEED_INVALID);
+			blob, subnode, "phy-type", COMPHY_SPEED_INVALID);
 		comphy_map_data[lane].invert = fdtdec_get_int(
-			blob, subnode, "phy-invert", PHY_POLARITY_NO_INVERT);
+			blob, subnode, "phy-invert", COMPHY_POLARITY_NO_INVERT);
 		comphy_map_data[lane].clk_src = fdtdec_get_bool(blob, subnode,
 								"clk-src");
 		comphy_map_data[lane].end_point = fdtdec_get_bool(blob, subnode,
 								  "end_point");
-		if (comphy_map_data[lane].type == PHY_TYPE_INVALID) {
+		if (comphy_map_data[lane].type == COMPHY_TYPE_INVALID) {
 			printf("no phy type for lane %d, setting lane as unconnected\n",
 			       lane + 1);
 		}
diff --git a/drivers/phy/marvell/comphy_cp110.c b/drivers/phy/marvell/comphy_cp110.c
index a323de7c76d0..e4ab90121c74 100644
--- a/drivers/phy/marvell/comphy_cp110.c
+++ b/drivers/phy/marvell/comphy_cp110.c
@@ -74,35 +74,47 @@  struct utmi_phy_data {
  * Eth_port_0 that include (SGMII0, RXAUI0, SFI)
  */
 struct comphy_mux_data cp110_comphy_phy_mux_data[] = {
-	{4, {{PHY_TYPE_UNCONNECTED, 0x0}, {PHY_TYPE_SGMII1, 0x1}, /* Lane 0 */
-	     {PHY_TYPE_SATA1, 0x4} } },
-	{4, {{PHY_TYPE_UNCONNECTED, 0x0}, {PHY_TYPE_SGMII2, 0x1}, /* Lane 1 */
-	     {PHY_TYPE_SATA0, 0x4} } },
-	{6, {{PHY_TYPE_UNCONNECTED, 0x0}, {PHY_TYPE_SGMII0, 0x1}, /* Lane 2 */
-	     {PHY_TYPE_RXAUI0, 0x1}, {PHY_TYPE_SFI, 0x1},
-	     {PHY_TYPE_SATA0, 0x4} } },
-	{8, {{PHY_TYPE_UNCONNECTED, 0x0}, {PHY_TYPE_RXAUI1, 0x1}, /* Lane 3 */
-	     {PHY_TYPE_SGMII1, 0x2}, {PHY_TYPE_SATA1, 0x4} } },
-	{7, {{PHY_TYPE_UNCONNECTED, 0x0}, {PHY_TYPE_SGMII0, 0x2}, /* Lane 4 */
-	     {PHY_TYPE_RXAUI0, 0x2}, {PHY_TYPE_SFI, 0x2},
-	     {PHY_TYPE_SGMII1, 0x1} } },
-	{6, {{PHY_TYPE_UNCONNECTED, 0x0}, {PHY_TYPE_SGMII2, 0x1}, /* Lane 5 */
-	     {PHY_TYPE_RXAUI1, 0x2}, {PHY_TYPE_SATA1, 0x4} } },
+	/* Lane 0 */
+	{4, {{COMPHY_TYPE_UNCONNECTED, 0x0}, {COMPHY_TYPE_SGMII1, 0x1},
+	     {COMPHY_TYPE_SATA1, 0x4} } },
+	/* Lane 1 */
+	{4, {{COMPHY_TYPE_UNCONNECTED, 0x0}, {COMPHY_TYPE_SGMII2, 0x1},
+	     {COMPHY_TYPE_SATA0, 0x4} } },
+	/* Lane 2 */
+	{6, {{COMPHY_TYPE_UNCONNECTED, 0x0}, {COMPHY_TYPE_SGMII0, 0x1},
+	     {COMPHY_TYPE_RXAUI0, 0x1}, {COMPHY_TYPE_SFI, 0x1},
+	     {COMPHY_TYPE_SATA0, 0x4} } },
+	/* Lane 3 */
+	{8, {{COMPHY_TYPE_UNCONNECTED, 0x0}, {COMPHY_TYPE_RXAUI1, 0x1},
+	     {COMPHY_TYPE_SGMII1, 0x2}, {COMPHY_TYPE_SATA1, 0x4} } },
+	/* Lane 4 */
+	{7, {{COMPHY_TYPE_UNCONNECTED, 0x0}, {COMPHY_TYPE_SGMII0, 0x2},
+	     {COMPHY_TYPE_RXAUI0, 0x2}, {COMPHY_TYPE_SFI, 0x2},
+	     {COMPHY_TYPE_SGMII1, 0x1} } },
+	/* Lane 5 */
+	{6, {{COMPHY_TYPE_UNCONNECTED, 0x0}, {COMPHY_TYPE_SGMII2, 0x1},
+	     {COMPHY_TYPE_RXAUI1, 0x2}, {COMPHY_TYPE_SATA1, 0x4} } },
 };
 
 struct comphy_mux_data cp110_comphy_pipe_mux_data[] = {
-	{2, {{PHY_TYPE_UNCONNECTED, 0x0}, {PHY_TYPE_PEX0, 0x4} } }, /* Lane 0 */
-	{4, {{PHY_TYPE_UNCONNECTED, 0x0}, /* Lane 1 */
-	     {PHY_TYPE_USB3_HOST0, 0x1}, {PHY_TYPE_USB3_DEVICE, 0x2},
-	     {PHY_TYPE_PEX0, 0x4} } },
-	{3, {{PHY_TYPE_UNCONNECTED, 0x0}, /* Lane 2 */
-	     {PHY_TYPE_USB3_HOST0, 0x1}, {PHY_TYPE_PEX0, 0x4} } },
-	{3, {{PHY_TYPE_UNCONNECTED, 0x0}, /* Lane 3 */
-	     {PHY_TYPE_USB3_HOST1, 0x1}, {PHY_TYPE_PEX0, 0x4} } },
-	{4, {{PHY_TYPE_UNCONNECTED, 0x0}, /* Lane 4 */
-	     {PHY_TYPE_USB3_HOST1, 0x1},
-	     {PHY_TYPE_USB3_DEVICE, 0x2}, {PHY_TYPE_PEX1, 0x4} } },
-	{2, {{PHY_TYPE_UNCONNECTED, 0x0}, {PHY_TYPE_PEX2, 0x4} } }, /* Lane 5 */
+	/* Lane 0 */
+	{2, {{COMPHY_TYPE_UNCONNECTED, 0x0}, {COMPHY_TYPE_PEX0, 0x4} } },
+	/* Lane 1 */
+	{4, {{COMPHY_TYPE_UNCONNECTED, 0x0},
+	     {COMPHY_TYPE_USB3_HOST0, 0x1}, {COMPHY_TYPE_USB3_DEVICE, 0x2},
+	     {COMPHY_TYPE_PEX0, 0x4} } },
+	/* Lane 2 */
+	{3, {{COMPHY_TYPE_UNCONNECTED, 0x0},
+	     {COMPHY_TYPE_USB3_HOST0, 0x1}, {COMPHY_TYPE_PEX0, 0x4} } },
+	/* Lane 3 */
+	{3, {{COMPHY_TYPE_UNCONNECTED, 0x0},
+	     {COMPHY_TYPE_USB3_HOST1, 0x1}, {COMPHY_TYPE_PEX0, 0x4} } },
+	/* Lane 4 */
+	{4, {{COMPHY_TYPE_UNCONNECTED, 0x0},
+	     {COMPHY_TYPE_USB3_HOST1, 0x1},
+	     {COMPHY_TYPE_USB3_DEVICE, 0x2}, {COMPHY_TYPE_PEX1, 0x4} } },
+	/* Lane 5 */
+	{2, {{COMPHY_TYPE_UNCONNECTED, 0x0}, {COMPHY_TYPE_PEX2, 0x4} } },
 };
 
 static u32 polling_with_timeout(void __iomem *addr, u32 val,
@@ -868,9 +880,9 @@  static void comphy_mux_cp110_init(struct chip_serdes_phy_config *ptr_chip_cfg,
 			comphy_base_addr + COMMON_SELECTOR_PIPE_OFFSET);
 	/* Fix the type after check the PHY and PIPE configuration */
 	for (lane = 0; lane < comphy_max_count; lane++) {
-		if ((comphy_map_pipe_data[lane].type == PHY_TYPE_UNCONNECTED) &&
-		    (comphy_map_phy_data[lane].type == PHY_TYPE_UNCONNECTED))
-			serdes_map[lane].type = PHY_TYPE_UNCONNECTED;
+		if ((comphy_map_pipe_data[lane].type == COMPHY_TYPE_UNCONNECTED) &&
+		    (comphy_map_phy_data[lane].type == COMPHY_TYPE_UNCONNECTED))
+			serdes_map[lane].type = COMPHY_TYPE_UNCONNECTED;
 	}
 }
 
@@ -895,7 +907,7 @@  int comphy_cp110_init(struct chip_serdes_phy_config *ptr_chip_cfg,
 	/* Check if the first 4 lanes configured as By-4 */
 	for (lane = 0, ptr_comphy_map = serdes_map; lane < 4;
 	     lane++, ptr_comphy_map++) {
-		if (ptr_comphy_map->type != PHY_TYPE_PEX0)
+		if (ptr_comphy_map->type != COMPHY_TYPE_PEX0)
 			break;
 		pcie_width++;
 	}
@@ -912,14 +924,14 @@  int comphy_cp110_init(struct chip_serdes_phy_config *ptr_chip_cfg,
 			pcie_width = 1;
 		}
 		switch (ptr_comphy_map->type) {
-		case PHY_TYPE_UNCONNECTED:
-		case PHY_TYPE_IGNORE:
+		case COMPHY_TYPE_UNCONNECTED:
+		case COMPHY_TYPE_IGNORE:
 			continue;
 			break;
-		case PHY_TYPE_PEX0:
-		case PHY_TYPE_PEX1:
-		case PHY_TYPE_PEX2:
-		case PHY_TYPE_PEX3:
+		case COMPHY_TYPE_PEX0:
+		case COMPHY_TYPE_PEX1:
+		case COMPHY_TYPE_PEX2:
+		case COMPHY_TYPE_PEX3:
 			mode = COMPHY_FW_PCIE_FORMAT(pcie_width,
 						     ptr_comphy_map->clk_src,
 						     COMPHY_PCIE_MODE,
@@ -928,30 +940,30 @@  int comphy_cp110_init(struct chip_serdes_phy_config *ptr_chip_cfg,
 					 ptr_chip_cfg->comphy_base_addr, lane,
 					 mode);
 			break;
-		case PHY_TYPE_SATA0:
-		case PHY_TYPE_SATA1:
-		case PHY_TYPE_SATA2:
-		case PHY_TYPE_SATA3:
+		case COMPHY_TYPE_SATA0:
+		case COMPHY_TYPE_SATA1:
+		case COMPHY_TYPE_SATA2:
+		case COMPHY_TYPE_SATA3:
 			mode =  COMPHY_FW_MODE_FORMAT(COMPHY_SATA_MODE);
 			ret = comphy_sata_power_up(lane, hpipe_base_addr,
 						   comphy_base_addr,
 						   ptr_chip_cfg->cp_index,
 						   mode);
 			break;
-		case PHY_TYPE_USB3_HOST0:
-		case PHY_TYPE_USB3_HOST1:
-		case PHY_TYPE_USB3_DEVICE:
+		case COMPHY_TYPE_USB3_HOST0:
+		case COMPHY_TYPE_USB3_HOST1:
+		case COMPHY_TYPE_USB3_DEVICE:
 			ret = comphy_usb3_power_up(lane, hpipe_base_addr,
 						   comphy_base_addr);
 			break;
-		case PHY_TYPE_SGMII0:
-		case PHY_TYPE_SGMII1:
-			if (ptr_comphy_map->speed == PHY_SPEED_INVALID) {
+		case COMPHY_TYPE_SGMII0:
+		case COMPHY_TYPE_SGMII1:
+			if (ptr_comphy_map->speed == COMPHY_SPEED_INVALID) {
 				debug("Warning: ");
 				debug("SGMII PHY speed in lane %d is invalid,",
 				      lane);
 				debug(" set PHY speed to 1.25G\n");
-				ptr_comphy_map->speed = PHY_SPEED_1_25G;
+				ptr_comphy_map->speed = COMPHY_SPEED_1_25G;
 			}
 
 			/*
@@ -965,12 +977,12 @@  int comphy_cp110_init(struct chip_serdes_phy_config *ptr_chip_cfg,
 					 ptr_chip_cfg->comphy_base_addr, lane,
 					 mode);
 			break;
-		case PHY_TYPE_SGMII2:
-		case PHY_TYPE_SGMII3:
-			if (ptr_comphy_map->speed == PHY_SPEED_INVALID) {
+		case COMPHY_TYPE_SGMII2:
+		case COMPHY_TYPE_SGMII3:
+			if (ptr_comphy_map->speed == COMPHY_SPEED_INVALID) {
 				debug("Warning: SGMII PHY speed in lane %d is invalid, set PHY speed to 1.25G\n",
 				      lane);
-				ptr_comphy_map->speed = PHY_SPEED_1_25G;
+				ptr_comphy_map->speed = COMPHY_SPEED_1_25G;
 			}
 
 			mode = COMPHY_FW_FORMAT(COMPHY_SGMII_MODE,
@@ -980,7 +992,7 @@  int comphy_cp110_init(struct chip_serdes_phy_config *ptr_chip_cfg,
 					 ptr_chip_cfg->comphy_base_addr, lane,
 					 mode);
 			break;
-		case PHY_TYPE_SFI:
+		case COMPHY_TYPE_SFI:
 			mode = COMPHY_FW_FORMAT(COMPHY_SFI_MODE,
 						COMPHY_UNIT_ID0,
 						ptr_comphy_map->speed);
@@ -988,8 +1000,8 @@  int comphy_cp110_init(struct chip_serdes_phy_config *ptr_chip_cfg,
 					 ptr_chip_cfg->comphy_base_addr, lane,
 					 mode);
 			break;
-		case PHY_TYPE_RXAUI0:
-		case PHY_TYPE_RXAUI1:
+		case COMPHY_TYPE_RXAUI0:
+		case COMPHY_TYPE_RXAUI1:
 			ret = comphy_rxauii_power_up(lane, hpipe_base_addr,
 						     comphy_base_addr);
 			break;
@@ -1001,9 +1013,9 @@  int comphy_cp110_init(struct chip_serdes_phy_config *ptr_chip_cfg,
 		if (ret == 0) {
 			/*
 			 * If interface wans't initialized, set the lane to
-			 * PHY_TYPE_UNCONNECTED state.
+			 * COMPHY_TYPE_UNCONNECTED state.
 			 */
-			ptr_comphy_map->type = PHY_TYPE_UNCONNECTED;
+			ptr_comphy_map->type = COMPHY_TYPE_UNCONNECTED;
 			pr_err("PLL is not locked - Failed to initialize lane %d\n",
 			      lane);
 		}
diff --git a/drivers/phy/marvell/comphy_mux.c b/drivers/phy/marvell/comphy_mux.c
index 98327557a899..aaef736b75dd 100644
--- a/drivers/phy/marvell/comphy_mux.c
+++ b/drivers/phy/marvell/comphy_mux.c
@@ -15,7 +15,7 @@ 
  * description: this function passes over the COMPHY lanes and check if the type
  *              is valid for specific lane. If the type is not valid,
  *              the function update the struct and set the type of the lane as
- *              PHY_TYPE_UNCONNECTED
+ *              COMPHY_TYPE_UNCONNECTED
  */
 static void comphy_mux_check_config(struct comphy_mux_data *mux_data,
 		struct comphy_map *comphy_map_data, int comphy_max_lanes)
@@ -28,7 +28,7 @@  static void comphy_mux_check_config(struct comphy_mux_data *mux_data,
 	for (lane = 0; lane < comphy_max_lanes;
 	     lane++, comphy_map_data++, mux_data++) {
 		/* Don't check ignored COMPHYs */
-		if (comphy_map_data->type == PHY_TYPE_IGNORE)
+		if (comphy_map_data->type == COMPHY_TYPE_IGNORE)
 			continue;
 
 		mux_opt = mux_data->mux_values;
@@ -43,8 +43,8 @@  static void comphy_mux_check_config(struct comphy_mux_data *mux_data,
 			debug("lane number %d, had invalid type %d\n",
 			      lane, comphy_map_data->type);
 			debug("set lane %d as type %d\n", lane,
-			      PHY_TYPE_UNCONNECTED);
-			comphy_map_data->type = PHY_TYPE_UNCONNECTED;
+			      COMPHY_TYPE_UNCONNECTED);
+			comphy_map_data->type = COMPHY_TYPE_UNCONNECTED;
 		} else {
 			debug("lane number %d, has type %d\n",
 			      lane, comphy_map_data->type);
@@ -88,7 +88,7 @@  static void comphy_mux_reg_write(struct comphy_mux_data *mux_data,
 
 	for (lane = 0; lane < comphy_max_lanes;
 	     lane++, comphy_map_data++, mux_data++) {
-		if (comphy_map_data->type == PHY_TYPE_IGNORE)
+		if (comphy_map_data->type == COMPHY_TYPE_IGNORE)
 			continue;
 
 		/*
diff --git a/include/dt-bindings/comphy/comphy_data.h b/include/dt-bindings/comphy/comphy_data.h
index 08544fa758bf..7d62dcf7fa51 100644
--- a/include/dt-bindings/comphy/comphy_data.h
+++ b/include/dt-bindings/comphy/comphy_data.h
@@ -6,53 +6,53 @@ 
 #ifndef _COMPHY_DATA_H_
 #define _COMPHY_DATA_H_
 
-#define PHY_SPEED_1_25G			0
-#define PHY_SPEED_1_5G			1
-#define PHY_SPEED_2_5G			2
-#define PHY_SPEED_3G			3
-#define PHY_SPEED_3_125G		4
-#define PHY_SPEED_5G			5
-#define PHY_SPEED_5_15625G		6
-#define PHY_SPEED_6G			7
-#define PHY_SPEED_6_25G			8
-#define PHY_SPEED_10_3125G		9
-#define PHY_SPEED_MAX			10
-#define PHY_SPEED_INVALID		0xff
+#define COMPHY_SPEED_1_25G		0
+#define COMPHY_SPEED_1_5G		1
+#define COMPHY_SPEED_2_5G		2
+#define COMPHY_SPEED_3G			3
+#define COMPHY_SPEED_3_125G		4
+#define COMPHY_SPEED_5G			5
+#define COMPHY_SPEED_5_15625G		6
+#define COMPHY_SPEED_6G			7
+#define COMPHY_SPEED_6_25G		8
+#define COMPHY_SPEED_10_3125G		9
+#define COMPHY_SPEED_MAX		10
+#define COMPHY_SPEED_INVALID		0xff
 
-#define PHY_TYPE_UNCONNECTED		0
-#define PHY_TYPE_PEX0			1
-#define PHY_TYPE_PEX1			2
-#define PHY_TYPE_PEX2			3
-#define PHY_TYPE_PEX3			4
-#define PHY_TYPE_SATA0			5
-#define PHY_TYPE_SATA1			6
-#define PHY_TYPE_SATA2			7
-#define PHY_TYPE_SATA3			8
-#define PHY_TYPE_SGMII0			9
-#define PHY_TYPE_SGMII1			10
-#define PHY_TYPE_SGMII2			11
-#define PHY_TYPE_SGMII3			12
-#define PHY_TYPE_QSGMII			13
-#define PHY_TYPE_USB3			14
-#define PHY_TYPE_USB3_HOST0		15
-#define PHY_TYPE_USB3_HOST1		16
-#define PHY_TYPE_USB3_DEVICE		17
-#define PHY_TYPE_XAUI0			18
-#define PHY_TYPE_XAUI1			19
-#define PHY_TYPE_XAUI2			20
-#define PHY_TYPE_XAUI3			21
-#define PHY_TYPE_RXAUI0			22
-#define PHY_TYPE_RXAUI1			23
-#define PHY_TYPE_SFI			24
-#define PHY_TYPE_IGNORE			25
-#define PHY_TYPE_MAX			26
-#define PHY_TYPE_INVALID		0xff
+#define COMPHY_TYPE_UNCONNECTED		0
+#define COMPHY_TYPE_PEX0		1
+#define COMPHY_TYPE_PEX1		2
+#define COMPHY_TYPE_PEX2		3
+#define COMPHY_TYPE_PEX3		4
+#define COMPHY_TYPE_SATA0		5
+#define COMPHY_TYPE_SATA1		6
+#define COMPHY_TYPE_SATA2		7
+#define COMPHY_TYPE_SATA3		8
+#define COMPHY_TYPE_SGMII0		9
+#define COMPHY_TYPE_SGMII1		10
+#define COMPHY_TYPE_SGMII2		11
+#define COMPHY_TYPE_SGMII3		12
+#define COMPHY_TYPE_QSGMII		13
+#define COMPHY_TYPE_USB3                14
+#define COMPHY_TYPE_USB3_HOST0		15
+#define COMPHY_TYPE_USB3_HOST1		16
+#define COMPHY_TYPE_USB3_DEVICE		17
+#define COMPHY_TYPE_XAUI0		18
+#define COMPHY_TYPE_XAUI1		19
+#define COMPHY_TYPE_XAUI2		20
+#define COMPHY_TYPE_XAUI3		21
+#define COMPHY_TYPE_RXAUI0		22
+#define COMPHY_TYPE_RXAUI1		23
+#define COMPHY_TYPE_SFI			24
+#define COMPHY_TYPE_IGNORE		25
+#define COMPHY_TYPE_MAX			26
+#define COMPHY_TYPE_INVALID		0xff
 
-#define PHY_POLARITY_NO_INVERT		0
-#define PHY_POLARITY_TXD_INVERT		1
-#define PHY_POLARITY_RXD_INVERT		2
-#define PHY_POLARITY_ALL_INVERT		\
-	(PHY_POLARITY_TXD_INVERT | PHY_POLARITY_RXD_INVERT)
+#define COMPHY_POLARITY_NO_INVERT	0
+#define COMPHY_POLARITY_TXD_INVERT	1
+#define COMPHY_POLARITY_RXD_INVERT	2
+#define COMPHY_POLARITY_ALL_INVERT	\
+	(COMPHY_POLARITY_TXD_INVERT | COMPHY_POLARITY_RXD_INVERT)
 
 #define UTMI_PHY_TO_USB3_HOST0		0
 #define UTMI_PHY_TO_USB3_HOST1		1