Message ID | 20210302164535.42831-1-lorbus@fedoraproject.org |
---|---|
State | Changes Requested |
Delegated to: | Kever Yang |
Headers | show |
Series | [v2] arm: Add support for Kobol Helios64 board | expand |
Uwe submitted this board last Thursday Dennis On Tue, Mar 2, 2021 at 10:46 AM Christian Glombek <lorbus@fedoraproject.org> wrote: > > The hardware is described in detail on Kobol's wiki at > https://wiki.kobol.io/helios64/intro/. > > This commit is based on downstream work in Armbian by Aditya Prayoga [1]. > The devicetree is taken from Linux v5.12-rc1 and was originally submitted there by > Uwe Kleine-Koenig [2]. > > [1] https://github.com/ukleinek/armbian-build/blob/35c85295d351830aa59b624db524ba04b238faae/patch/kernel/rockchip64-current/add-board-helios64.patch > [2] https://github.com/torvalds/linux/blob/7a7fd0de4a9804299793e564a555a49c1fc924cb/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts > --- > arch/arm/dts/Makefile | 1 + > .../arm/dts/rk3399-kobol-helios64-u-boot.dtsi | 136 +++++++ > arch/arm/dts/rk3399-kobol-helios64.dts | 372 ++++++++++++++++++ > arch/arm/mach-rockchip/rk3399/Kconfig | 17 + > board/kobol/helios64/Kconfig | 24 ++ > board/kobol/helios64/MAINTAINERS | 6 + > board/kobol/helios64/Makefile | 5 + > board/kobol/helios64/helios64.c | 304 ++++++++++++++ > board/kobol/helios64/sys_otp.c | 250 ++++++++++++ > board/kobol/helios64/sys_otp.h | 12 + > configs/helios64-rk3399_defconfig | 147 +++++++ > include/configs/helios64.h | 47 +++ > 12 files changed, 1321 insertions(+) > create mode 100644 arch/arm/dts/rk3399-kobol-helios64-u-boot.dtsi > create mode 100644 arch/arm/dts/rk3399-kobol-helios64.dts > create mode 100644 board/kobol/helios64/Kconfig > create mode 100644 board/kobol/helios64/MAINTAINERS > create mode 100644 board/kobol/helios64/Makefile > create mode 100644 board/kobol/helios64/helios64.c > create mode 100644 board/kobol/helios64/sys_otp.c > create mode 100644 board/kobol/helios64/sys_otp.h > create mode 100644 configs/helios64-rk3399_defconfig > create mode 100644 include/configs/helios64.h > > diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile > index 33e483f4fb..2c820bc2b7 100644 > --- a/arch/arm/dts/Makefile > +++ b/arch/arm/dts/Makefile > @@ -124,6 +124,7 @@ dtb-$(CONFIG_ROCKCHIP_RK3399) += \ > rk3399-ficus.dtb \ > rk3399-firefly.dtb \ > rk3399-gru-bob.dtb \ > + rk3399-kobol-helios64.dtb \ > rk3399-khadas-edge.dtb \ > rk3399-khadas-edge-captain.dtb \ > rk3399-khadas-edge-v.dtb \ > diff --git a/arch/arm/dts/rk3399-kobol-helios64-u-boot.dtsi b/arch/arm/dts/rk3399-kobol-helios64-u-boot.dtsi > new file mode 100644 > index 0000000000..6fe9d59df3 > --- /dev/null > +++ b/arch/arm/dts/rk3399-kobol-helios64-u-boot.dtsi > @@ -0,0 +1,136 @@ > +// SPDX-License-Identifier: GPL-2.0+ > +/* > + * Copyright (c) 2020 Aditya Prayoga <aditya@kobol.io> > + */ > + > +#include "rk3399-u-boot.dtsi" > +#include "rk3399-sdram-lpddr4-100.dtsi" > +/ { > + aliases { > + spi0 = &spi1; > + spi1 = &spi2; > + spi2 = &spi5; > + ethernet0 = &gmac; > + ethernet1 = &usb_lan; > + }; > + > + chosen { > + bootargs = "earlycon=uart8250,mmio32,0xff1a0000 earlyprintk"; > + stdout-path = "serial2:1500000n8"; > + u-boot,spl-boot-order = "same-as-spl", &spiflash, &sdmmc, &sdhci; > + }; > + > + config { > + u-boot,spl-payload-offset = <0x80000>; /* @ 512KB */ > + }; > +}; > + > +&gpio1 { > + usb-mux-hs { > + gpio-hog; > + gpios = <RK_PA4 GPIO_ACTIVE_HIGH>; > + output-low; > + line-name = "USB_MUX_HS"; > + }; > + > + usb-mux-oe { > + gpio-hog; > + gpios = <RK_PB5 GPIO_ACTIVE_LOW>; > + output-high; > + line-name = "USB_MUX_OE#"; > + }; > + > + soc-flash-wp { > + gpio-hog; > + gpios = <RK_PC2 GPIO_ACTIVE_LOW>; > + output-low; > + line-name = "SOC_WP#"; > + }; > +}; > + > +&gpio2 { > + sata-flash-wp { > + gpio-hog; > + gpios = <RK_PD0 GPIO_ACTIVE_LOW>; > + output-high; > + line-name = "SATA_WP#_LV"; > + }; > +}; > + > +&gpio4 { > + auto-on-en-d { > + gpio-hog; > + gpios = <RK_PD1 GPIO_ACTIVE_HIGH>; > + output-low; > + line-name = "AUTO_ON_EN_D"; > + }; > + > + auto-on-en-clk { > + gpio-hog; > + gpios = <RK_PD2 GPIO_ACTIVE_HIGH>; > + output-low; > + line-name = "AUTO_ON_EN_CLK"; > + }; > + > + board-rev-id-0 { > + gpio-hog; > + gpios = <RK_PD5 GPIO_ACTIVE_HIGH>; > + input; > + }; > + > + board-rev-id-1 { > + gpio-hog; > + gpios = <RK_PD6 GPIO_ACTIVE_HIGH>; > + input; > + }; > +}; > + > +&int_hub { > + compatible = "usb-hub"; > + usb,device-class = <USB_CLASS_HUB>; > +}; > + > +&pcie_prst { > + rockchip,pins = > + <2 RK_PD4 RK_FUNC_GPIO &pcfg_output_low>; > +}; > + > +&pcie_pwr_en { > + rockchip,pins = > + <1 RK_PD0 RK_FUNC_GPIO &pcfg_output_low>; > +}; > + > +&pinctrl { > + usb { > + usb_mux_hs: usb-mux-hs { > + rockchip,pins = > + <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + > + usb_mux_oe: usb-mux-oe { > + rockchip,pins = > + <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + }; > +}; > + > +&spi1 { > + spiflash: flash@0 { > + compatible = "jedec,spi-nor"; > + reg = <0x0>; > + spi-max-frequency = <25000000>; > + status = "okay"; > + m25p,fast-read; > + u-boot,dm-pre-reloc; > + }; > +}; > + > +&vdd_center { > + regulator-min-microvolt = <950000>; > + regulator-max-microvolt = <950000>; > + regulator-init-microvolt = <950000>; > +}; > + > +&vdd_log { > + regulator-init-microvolt = <900000>; > +}; > diff --git a/arch/arm/dts/rk3399-kobol-helios64.dts b/arch/arm/dts/rk3399-kobol-helios64.dts > new file mode 100644 > index 0000000000..66c725a342 > --- /dev/null > +++ b/arch/arm/dts/rk3399-kobol-helios64.dts > @@ -0,0 +1,372 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > +/* > + * Copyright (c) 2020 Aditya Prayoga <aditya@kobol.io> > + */ > + > +/* > + * The Kobol Helios64 is a board designed to operate as a NAS and optionally > + * ships with an enclosing that can host five 2.5" hard disks. > + * > + * See https://wiki.kobol.io/helios64/intro/ for further details. > + */ > + > +/dts-v1/; > +#include "rk3399.dtsi" > +#include "rk3399-opp.dtsi" > + > +/ { > + model = "Kobol Helios64"; > + compatible = "kobol,helios64", "rockchip,rk3399"; > + > + avdd_1v8_s0: avdd-1v8-s0 { > + compatible = "regulator-fixed"; > + regulator-name = "avdd_1v8_s0"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + vin-supply = <&vcc3v3_sys_s3>; > + }; > + > + clkin_gmac: external-gmac-clock { > + compatible = "fixed-clock"; > + clock-frequency = <125000000>; > + clock-output-names = "clkin_gmac"; > + #clock-cells = <0>; > + }; > + > + leds { > + compatible = "gpio-leds"; > + pinctrl-names = "default"; > + pinctrl-0 = <&sys_grn_led_on &sys_red_led_on>; > + > + led-0 { > + label = "helios64:green:status"; > + gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>; > + default-state = "on"; > + }; > + > + led-1 { > + label = "helios64:red:fault"; > + gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>; > + default-state = "keep"; > + }; > + }; > + > + vcc1v8_sys_s0: vcc1v8-sys-s0 { > + compatible = "regulator-fixed"; > + regulator-name = "vcc1v8_sys_s0"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + vin-supply = <&vcc1v8_sys_s3>; > + }; > + > + vcc3v0_sd: vcc3v0-sd { > + compatible = "regulator-fixed"; > + enable-active-high; > + gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>; > + regulator-name = "vcc3v0_sd"; > + regulator-boot-on; > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3000000>; > + pinctrl-names = "default"; > + pinctrl-0 = <&sdmmc0_pwr_h>; > + vin-supply = <&vcc3v3_sys_s3>; > + }; > + > + vcc3v3_sys_s3: vcc_lan: vcc3v3-sys-s3 { > + compatible = "regulator-fixed"; > + regulator-name = "vcc3v3_sys_s3"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + vin-supply = <&vcc5v0_sys>; > + > + regulator-state-mem { > + regulator-on-in-suspend; > + }; > + }; > + > + vcc5v0_sys: vcc5v0-sys { > + compatible = "regulator-fixed"; > + regulator-name = "vcc5v0_sys"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + vin-supply = <&vcc12v_dcin_bkup>; > + > + regulator-state-mem { > + regulator-on-in-suspend; > + }; > + }; > + > + vcc12v_dcin: vcc12v-dcin { > + compatible = "regulator-fixed"; > + regulator-name = "vcc12v_dcin"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <12000000>; > + regulator-max-microvolt = <12000000>; > + }; > + > + vcc12v_dcin_bkup: vcc12v-dcin-bkup { > + compatible = "regulator-fixed"; > + regulator-name = "vcc12v_dcin_bkup"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <12000000>; > + regulator-max-microvolt = <12000000>; > + vin-supply = <&vcc12v_dcin>; > + }; > +}; > + > +/* > + * The system doesn't run stable with cpu freq enabled, so disallow the lower > + * frequencies until this problem is properly understood and resolved. > + */ > +&cluster0_opp { > + /delete-node/ opp00; > + /delete-node/ opp01; > + /delete-node/ opp02; > + /delete-node/ opp03; > + /delete-node/ opp04; > +}; > + > +&cluster1_opp { > + /delete-node/ opp00; > + /delete-node/ opp01; > + /delete-node/ opp02; > + /delete-node/ opp03; > + /delete-node/ opp04; > + /delete-node/ opp05; > + /delete-node/ opp06; > +}; > + > +&cpu_b0 { > + cpu-supply = <&vdd_cpu_b>; > +}; > + > +&cpu_b1 { > + cpu-supply = <&vdd_cpu_b>; > +}; > + > +&cpu_l0 { > + cpu-supply = <&vdd_cpu_l>; > +}; > + > +&cpu_l1 { > + cpu-supply = <&vdd_cpu_l>; > +}; > + > +&cpu_l2 { > + cpu-supply = <&vdd_cpu_l>; > +}; > + > +&cpu_l3 { > + cpu-supply = <&vdd_cpu_l>; > +}; > + > +&emmc_phy { > + status = "okay"; > +}; > + > +&gmac { > + assigned-clock-parents = <&clkin_gmac>; > + assigned-clocks = <&cru SCLK_RMII_SRC>; > + clock_in_out = "input"; > + phy-mode = "rgmii"; > + phy-supply = <&vcc_lan>; > + pinctrl-names = "default"; > + pinctrl-0 = <&rgmii_pins &gphy_reset>; > + rx_delay = <0x20>; > + tx_delay = <0x28>; > + snps,reset-active-low; > + snps,reset-delays-us = <0 10000 50000>; > + snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; > + status = "okay"; > +}; > + > +&i2c0 { > + clock-frequency = <400000>; > + i2c-scl-rising-time-ns = <168>; > + i2c-scl-falling-time-ns = <4>; > + status = "okay"; > + > + rk808: pmic@1b { > + compatible = "rockchip,rk808"; > + reg = <0x1b>; > + interrupt-parent = <&gpio0>; > + interrupts = <10 IRQ_TYPE_LEVEL_LOW>; > + clock-output-names = "xin32k", "rk808-clkout2"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pmic_int_l>; > + vcc1-supply = <&vcc5v0_sys>; > + vcc2-supply = <&vcc5v0_sys>; > + vcc3-supply = <&vcc5v0_sys>; > + vcc4-supply = <&vcc5v0_sys>; > + vcc6-supply = <&vcc5v0_sys>; > + vcc7-supply = <&vcc5v0_sys>; > + vcc8-supply = <&vcc3v3_sys_s3>; > + vcc9-supply = <&vcc5v0_sys>; > + vcc10-supply = <&vcc5v0_sys>; > + vcc11-supply = <&vcc5v0_sys>; > + vcc12-supply = <&vcc3v3_sys_s3>; > + vddio-supply = <&vcc3v0_s3>; > + wakeup-source; > + #clock-cells = <1>; > + > + regulators { > + vdd_cpu_l: DCDC_REG2 { > + regulator-name = "vdd_cpu_l"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <750000>; > + regulator-max-microvolt = <1350000>; > + regulator-ramp-delay = <6001>; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vcc1v8_sys_s3: DCDC_REG4 { > + regulator-name = "vcc1v8_sys_s3"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <1800000>; > + }; > + }; > + > + vcc_sdio_s0: LDO_REG4 { > + regulator-name = "vcc_sdio_s0"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3000000>; > + > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <3000000>; > + }; > + }; > + > + vcc3v0_s3: LDO_REG8 { > + regulator-name = "vcc3v0_s3"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3000000>; > + > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <3000000>; > + }; > + }; > + }; > + }; > + > + vdd_cpu_b: regulator@40 { > + compatible = "silergy,syr827"; > + reg = <0x40>; > + fcs,suspend-voltage-selector = <1>; > + regulator-name = "vdd_cpu_b"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <712500>; > + regulator-max-microvolt = <1500000>; > + regulator-ramp-delay = <1000>; > + vin-supply = <&vcc5v0_sys>; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > +}; > + > +&i2c2 { > + clock-frequency = <400000>; > + i2c-scl-rising-time-ns = <160>; > + i2c-scl-falling-time-ns = <30>; > + status = "okay"; > + > + temp@4c { > + compatible = "national,lm75"; > + reg = <0x4c>; > + }; > +}; > + > +&io_domains { > + audio-supply = <&vcc1v8_sys_s0>; > + bt656-supply = <&vcc1v8_sys_s0>; > + gpio1830-supply = <&vcc3v0_s3>; > + sdmmc-supply = <&vcc_sdio_s0>; > + status = "okay"; > +}; > + > +&pinctrl { > + gmac { > + gphy_reset: gphy-reset { > + rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_output_low>; > + }; > + }; > + > + leds { > + sys_grn_led_on: sys-grn-led-on { > + rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_down>; > + }; > + > + sys_red_led_on: sys-red-led-on { > + rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_down>; > + }; > + }; > + > + pmic { > + pmic_int_l: pmic-int-l { > + rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + }; > + > + vcc3v0-sd { > + sdmmc0_pwr_h: sdmmc0-pwr-h { > + rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>; > + }; > + }; > +}; > + > +&pmu_io_domains { > + pmu1830-supply = <&vcc3v0_s3>; > + status = "okay"; > +}; > + > +&sdhci { > + bus-width = <8>; > + mmc-hs200-1_8v; > + non-removable; > + vqmmc-supply = <&vcc1v8_sys_s0>; > + status = "okay"; > +}; > + > +&sdmmc { > + bus-width = <4>; > + cap-sd-highspeed; > + cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>; > + disable-wp; > + pinctrl-names = "default"; > + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; > + vmmc-supply = <&vcc3v0_sd>; > + vqmmc-supply = <&vcc_sdio_s0>; > + status = "okay"; > +}; > + > +&uart2 { > + status = "okay"; > +}; > diff --git a/arch/arm/mach-rockchip/rk3399/Kconfig b/arch/arm/mach-rockchip/rk3399/Kconfig > index 17628f9171..7890bafe56 100644 > --- a/arch/arm/mach-rockchip/rk3399/Kconfig > +++ b/arch/arm/mach-rockchip/rk3399/Kconfig > @@ -28,6 +28,22 @@ config TARGET_PINEBOOK_PRO_RK3399 > with 4Gb RAM, onboard eMMC, USB-C, a USB3 and USB2 port, > 1920*1080 screen and all the usual laptop features. > > +config TARGET_HELIOS64 > + bool "Kobol Innovations Helios64" > + select BOARD_LATE_INIT > + help > + Helios64 is a Network Attached Storage board based on Rockchip RK3399. > + > + Key features of the Helios64 include: > + * on-board PCIe to 5 Ports SATA Controller JMB585 > + * on-board USB 3.0 hub (3x USB 3.0 host) > + * USB Type-C (Support DisplayPort Alt Mode) > + * on-board 1 Gigabit Ethernet > + * on-board 2.5 Gigabit Ethernet (Realtek RTL8156) > + * on-board eMMC > + * on-board LPDDR4 > + * SPI, I2C, UART, GPIO > + > config TARGET_PUMA_RK3399 > bool "Theobroma Systems RK3399-Q7 (Puma)" > help > @@ -153,6 +169,7 @@ endif # BOOTCOUNT_LIMIT > > source "board/firefly/roc-pc-rk3399/Kconfig" > source "board/google/gru/Kconfig" > +source "board/kobol/helios64/Kconfig" > source "board/pine64/pinebook-pro-rk3399/Kconfig" > source "board/pine64/rockpro64_rk3399/Kconfig" > source "board/rockchip/evb_rk3399/Kconfig" > diff --git a/board/kobol/helios64/Kconfig b/board/kobol/helios64/Kconfig > new file mode 100644 > index 0000000000..644cdbd8f3 > --- /dev/null > +++ b/board/kobol/helios64/Kconfig > @@ -0,0 +1,24 @@ > +if TARGET_HELIOS64 > + > +config SYS_BOARD > + default "helios64" > + > +config SYS_VENDOR > + default "kobol" > + > +config SYS_CONFIG_NAME > + default "helios64" > + > +config BOARD_SPECIFIC_OPTIONS # dummy > + def_bool y > + > +config ENV_SECT_SIZE > + default 0x1000 if ENV_IS_IN_SPI_FLASH > + > +config ENV_SIZE > + default 0x8000 > + > +config ENV_OFFSET > + default 0x460000 if ENV_IS_IN_SPI_FLASH > + > +endif > diff --git a/board/kobol/helios64/MAINTAINERS b/board/kobol/helios64/MAINTAINERS > new file mode 100644 > index 0000000000..646644d485 > --- /dev/null > +++ b/board/kobol/helios64/MAINTAINERS > @@ -0,0 +1,6 @@ > +HELIOS64 BOARD > +M: Christian Glombek <lorbus@fedoraproject.org> > +S: Maintained > +F: board/kobol/helios64/ > +F: include/configs/helios64.h > +F: configs/helios64_defconfig > diff --git a/board/kobol/helios64/Makefile b/board/kobol/helios64/Makefile > new file mode 100644 > index 0000000000..ab34245a6d > --- /dev/null > +++ b/board/kobol/helios64/Makefile > @@ -0,0 +1,5 @@ > +# SPDX-License-Identifier: GPL-2.0+ > +# > +# Copyright (C) 2020 Aditya Prayoga <aditya@kobol.io> > + > +obj-y := helios64.o sys_otp.o > diff --git a/board/kobol/helios64/helios64.c b/board/kobol/helios64/helios64.c > new file mode 100644 > index 0000000000..86349339fb > --- /dev/null > +++ b/board/kobol/helios64/helios64.c > @@ -0,0 +1,304 @@ > +// SPDX-License-Identifier: GPL-2.0+ > +/* > + * (C) Copyright 2020 Aditya Prayoga <aditya@kobol.io> > + */ > + > +#include <common.h> > +#include <dm.h> > +#include <env.h> > +#include <log.h> > +#include <led.h> > +#include <pci.h> > +#include <power/regulator.h> > +#include <scsi.h> > +#include <spl_gpio.h> > +#include <syscon.h> > +#include <usb.h> > +#include <linux/delay.h> > +#include <asm/io.h> > +#include <asm/gpio.h> > +#include <asm/arch-rockchip/clock.h> > +#include <asm/arch-rockchip/gpio.h> > +#include <asm/arch-rockchip/grf_rk3399.h> > +#include <asm/arch-rockchip/hardware.h> > +#include <asm/arch-rockchip/misc.h> > +#include <asm/arch-rockchip/periph.h> > + > +#include "sys_otp.h" > + > +#ifndef CONFIG_TPL_BUILD > +int board_early_init_f(void) > +{ > +#ifdef CONFIG_SPL_BUILD > +#define GPIO0_BASE 0xff720000 > +#define GRF_BASE 0xff770000 > + struct rk3399_grf_regs * const grf = (void *)GRF_BASE; > + struct rockchip_gpio_regs * const gpio = (void *)GPIO0_BASE; > + > + /* Turn ON status LED. At this stage, FDT & DM is not initialized yet */ > + spl_gpio_output(gpio, GPIO(BANK_B, 4), 1); > +#endif > + return 0; > +} > +#endif > + > +#ifndef CONFIG_SPL_BUILD > +int board_early_init_r(void) > +{ > + read_otp_data(); > + return 0; > +} > +#endif > + > +#ifdef CONFIG_MISC_INIT_R > +#define GRF_IO_VSEL_BT565_SHIFT 0 > +#define GRF_IO_VSEL_AUDIO_SHIFT 1 > +#define GRF_IO_VSEL_SDMMC_SHIFT 2 > +#define GRF_IO_VSEL_GPIO1830_SHIFT 3 > + > +#define PMUGRF_CON0_VSEL_SHIFT 8 > +#define PMUGRF_CON0_PMU1830_VOL_SHIFT 9 > +static void setup_iodomain(void) > +{ > + struct rk3399_grf_regs *grf = > + syscon_get_first_range(ROCKCHIP_SYSCON_GRF); > + struct rk3399_pmugrf_regs *pmugrf = > + syscon_get_first_range(ROCKCHIP_SYSCON_PMUGRF); > + > + /* BT565 is in 1.8v domain */ > + rk_setreg(&grf->io_vsel, 1 << GRF_IO_VSEL_BT565_SHIFT); > + > + /* AUDIO is in 1.8v domain */ > + rk_setreg(&grf->io_vsel, 1 << GRF_IO_VSEL_AUDIO_SHIFT); > + > + /* SDMMC is in 3.0v domain */ > + rk_setreg(&grf->io_vsel, 0 << GRF_IO_VSEL_SDMMC_SHIFT); > + > + /* GPIO1830 is in 3.0v domain */ > + rk_setreg(&grf->io_vsel, 0 << GRF_IO_VSEL_GPIO1830_SHIFT); > + > + /* Set GPIO1 1.8v/3.0v source select to PMU1830_VOL */ > + rk_setreg(&pmugrf->soc_con0, 1 << PMUGRF_CON0_VSEL_SHIFT); > + rk_setreg(&pmugrf->soc_con0, 0 << PMUGRF_CON0_PMU1830_VOL_SHIFT); > +} > + > +/* > + * Swap mmc0 and mmc1 in boot_targets if booted from SD-Card. > + * > + * If bootsource is uSD-card we can assume that we want to use the > + * SD-Card instead of the eMMC as first boot_target for distroboot. > + * We only want to swap the defaults and not any custom environment a > + * user has set. We exit early if a changed boot_targets environment > + * is detected. > + */ > +static int setup_boottargets(void) > +{ > + const char *boot_device = > + ofnode_read_chosen_string("u-boot,spl-boot-device"); > + char *env_default, *env; > + > + if (!boot_device) { > + debug("%s: /chosen/u-boot,spl-boot-device not set\n", > + __func__); > + return -1; > + } > + debug("%s: booted from %s\n", __func__, boot_device); > + > + env_default = env_get_default("boot_targets"); > + env = env_get("boot_targets"); > + if (!env) { > + debug("%s: boot_targets does not exist\n", __func__); > + return -1; > + } > + debug("%s: boot_targets current: %s - default: %s\n", > + __func__, env, env_default); > + > + if (strcmp(env_default, env) != 0) { > + debug("%s: boot_targets not default, don't change it\n", > + __func__); > + return 0; > + } > + > + /* > + * Only run, if booting from mmc1 (i.e. /mmc@fe320000) and > + * only consider cases where the default boot-order first > + * tries to boot from mmc0 (eMMC) and then from mmc1 > + * (i.e. external SD). > + * > + * In other words: the SD card will be moved to earlier in the > + * order, if U-Boot was also loaded from the SD-card. > + */ > + if (!strcmp(boot_device, "/mmc@fe320000")) { > + char *mmc0, *mmc1; > + > + debug("%s: booted from SD-Card\n", __func__); > + mmc0 = strstr(env, "mmc0"); > + mmc1 = strstr(env, "mmc1"); > + > + if (!mmc0 || !mmc1) { > + debug("%s: only one mmc boot_target found\n", __func__); > + return -1; > + } > + > + /* > + * If mmc0 comes first in the boot order, we need to change > + * the strings to make mmc1 first. > + */ > + if (mmc0 < mmc1) { > + mmc0[3] = '1'; > + mmc1[3] = '0'; > + debug("%s: set boot_targets to: %s\n", __func__, env); > + env_set("boot_targets", env); > + } > + } > + > + return 0; > +} > + > +static void setup_leds(void) > +{ > + struct udevice *dev; > + > + led_get_by_label("helios64::status", &dev); > + led_set_state(dev, LEDST_OFF); > + mdelay(250); > + led_set_state(dev, LEDST_ON); > +} > + > +int misc_init_r(void) > +{ > + const u32 cpuid_offset = 0x7; > + const u32 cpuid_length = 0x10; > + u8 cpuid[cpuid_length]; > + int ret; > + > + setup_iodomain(); > + set_board_info(); > + > + ret = rockchip_cpuid_from_efuse(cpuid_offset, cpuid_length, cpuid); > + if (ret) > + return ret; > + > + ret = rockchip_cpuid_set(cpuid, cpuid_length); > + if (ret) > + return ret; > + > + if (mac_read_from_otp()) > + ret = rockchip_setup_macaddr(); > + > + setup_boottargets(); > + setup_leds(); > + > + return ret; > +} > +#endif > + > +#ifdef CONFIG_ROCKCHIP_ADVANCED_RECOVERY > +void rockchip_prepare_download_mode(void) > +{ > + struct gpio_desc *enable, *mux; > + > + if (gpio_hog_lookup_name("USB_MUX_OE#", &enable)) { > + debug("Fail to get USB_MUX_OE\n"); > + return; > + } > + > + if (gpio_hog_lookup_name("USB_MUX_HS", &mux)) { > + debug("Fail to get USB_MUX_HS\n"); > + return; > + } > + > + dm_gpio_set_value(enable, 0); > + mdelay(100); > + dm_gpio_set_value(mux, 1); > + mdelay(100); > + dm_gpio_set_value(enable, 1); > +} > +#endif > + > +#ifdef CONFIG_LAST_STAGE_INIT > +static void auto_power_enable(void) > +{ > + struct gpio_desc *enable, *clock; > + > + if (gpio_hog_lookup_name("AUTO_ON_EN_D", &enable)) { > + debug("Fail to get AUTO_ON_EN_D\n"); > + return; > + } > + > + if (gpio_hog_lookup_name("AUTO_ON_EN_CLK", &clock)) { > + debug("Fail to get AUTO_ON_EN_CLK\n"); > + return; > + } > + > + dm_gpio_set_value(enable, 1); > + dm_gpio_set_value(clock, 1); > + mdelay(10); > + dm_gpio_set_value(clock, 0); > +} > + > +static void sata_power_enable(void) > +{ > + struct udevice *rail_a, *rail_b; > + int ret; > + > + ret = regulator_get_by_platname("power_hdd_a", &rail_a); > + if (!ret) { > + ret = regulator_set_enable(rail_a, true); > + if (!ret) > + mdelay(10000); > + } > + > + ret = regulator_get_by_platname("power_hdd_b", &rail_b); > + if (!ret) > + ret = regulator_set_enable(rail_b, true); > + > +} > + > +int last_stage_init(void) > +{ > + auto_power_enable(); > + sata_power_enable(); > + > +#ifdef CONFIG_PCI > + scsi_scan(true); > +#endif > + > + return 0; > +} > +#endif > + > +#if defined(CONFIG_DISPLAY_BOARDINFO_LATE) > +int checkboard(void) > +{ > + int major, minor; > + > + printf("Revision: "); > + > + if (!get_revision(&major, &minor)) > + printf("%i.%i - %s\n", major, minor, get_variant()); > + else > + printf("UNKNOWN\n"); > + > + return 0; > +} > +#endif > + > +#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) > +int ft_board_setup(void *blob, struct bd_info *bd) > +{ > + char *env; > + > + env = env_get("board_rev"); > + if (env) > + fdt_setprop_string(blob, fdt_path_offset(blob, "/"), > + "kobol,board-rev", env); > + > + env = env_get("cpuid#"); > + if (env) > + fdt_setprop_string(blob, fdt_path_offset(blob, "/"), > + "kobol,cpu-id", env); > + > + return 0; > +} > +#endif > diff --git a/board/kobol/helios64/sys_otp.c b/board/kobol/helios64/sys_otp.c > new file mode 100644 > index 0000000000..8c20693c0e > --- /dev/null > +++ b/board/kobol/helios64/sys_otp.c > @@ -0,0 +1,250 @@ > +/* SPDX-License-Identifier: GPL-2.0+ */ > + > +#include <linux/types.h> > +#include <dm.h> > +#include <spi.h> > +#include <log.h> > +#include <net.h> > +#include <u-boot/crc.h> > + > +#include "sys_otp.h" > + > +#define OTP_DEVICE_BUS 0 > +#define OTP_DEVICE_CS 0 > +#define MAX_NUM_PORTS 2 > + > +enum board_variant { > + BOARD_VARIANT_INVALID = 0, > + BOARD_VARIANT_ENG_SAMPLE, > + BOARD_VARIANT_4G_PROD_NO_ECC, > + BOARD_VARIANT_MAX > +}; > + > +struct __attribute__ ((__packed__)) otp_data_t { > + u8 magic[8]; > + u8 part_num[16]; > + u8 variant; > + u8 revision; > + u8 serial_num[6]; > + u8 mfg_year[2]; > + u8 mfg_month; > + u8 mfg_day; > + u8 mac_addr[MAX_NUM_PORTS][6]; > + u8 reserved[204]; > + u32 checksum; > +} otp; > + > +static struct spi_slave *slave; > +static int has_been_read = 0; > +static int data_valid = 0; > + > +static inline int is_data_valid(void) > +{ > + return data_valid; > +} > + > +static inline int is_valid_header(void) > +{ > + if ((otp.magic[0] == 'H') || (otp.magic[1] == '6') || > + (otp.magic[2] == '4') || (otp.magic[3] == 'N') || > + (otp.magic[4] == 'P') || (otp.magic[5] == 'V') || > + (otp.magic[6] == '1') || (otp.magic[7] == 0)) > + > + return 1; > + > + return 0; > +} > + > +static int init_system_otp(int bus, int cs) > +{ > + int ret; > + char name[30], *str; > + struct udevice *dev; > + > + snprintf(name, sizeof(name), "generic_%d:%d", bus, cs); > + str = strdup(name); > + if (!str) > + return -ENOMEM; > + ret = spi_get_bus_and_cs(bus, cs, 25000000, CONFIG_DEFAULT_SPI_MODE, "spi_generic_drv", > + str, &dev, &slave); > + return ret; > +} > + > +#ifdef DEBUG > +/** > + * show_otp_data - display the contents of the OTP register > + */ > +static void show_otp_data(void) > +{ > + u32 i; > + u32 crc; > + > + const char* var_str[BOARD_VARIANT_MAX] = { > + "Invalid variant", > + "Engineering Sample", > + "Production - 4GB non ECC" > + }; > + > + printf("\n"); > + printf("Register dump: (%lu bytes)\n", sizeof(otp)); > + for (i = 0; i < sizeof(otp); i++) { > + if ((i % 16) == 0) > + printf("%02X: ", i); > + printf("%02X ", ((u8 *)&otp)[i]); > + if (((i % 16) == 15) || (i == sizeof(otp) - 1)) > + printf("\n"); > + } > + > + if (!is_valid_header()) > + return; > + > + printf("Part Number: %s\n", otp.part_num); > + printf("Variant: %s\n", var_str[otp.variant]); > + printf("Revision: %x.%x\n", (otp.revision & 0xf0) >> 4, otp.revision & 0x0f); > + printf("Serial Number: %012llx\n", *((uint64_t*) otp.serial_num) & > + 0xFFFFFFFFFFFF); > + printf("Manufacturing Date: %02X-%02X-%04X (DD-MM-YYYY)\n", otp.mfg_day, > + otp.mfg_month, *(u16*) otp.mfg_year); > + > + printf("1GbE MAC Address: %02X:%02X:%02X:%02X:%02X:%02X\n", > + otp.mac_addr[0][0], otp.mac_addr[0][1], otp.mac_addr[0][2], > + otp.mac_addr[0][3], otp.mac_addr[0][4], otp.mac_addr[0][5]); > + > + printf("2.5GbE MAC Address: %02X:%02X:%02X:%02X:%02X:%02X\n", > + otp.mac_addr[1][0], otp.mac_addr[1][1], otp.mac_addr[1][2], > + otp.mac_addr[1][3], otp.mac_addr[1][4], otp.mac_addr[1][5]); > + > + crc = crc32(0, (void *)&otp, sizeof(otp) - 4); > + > + if (crc == le32_to_cpu(otp.checksum)) > + printf("CRC: %08x\n\n", le32_to_cpu(otp.checksum)); > + else > + printf("CRC: %08x (should be %08x)\n\n", > + le32_to_cpu(otp.checksum), crc); > + > +} > +#endif > + > +int read_otp_data(void) > +{ > + int ret; > + u8 dout[5]; > + > + if (has_been_read) { > + if (is_data_valid()) > + return 0; > + else > + goto data_invalid; > + } > + > + ret = init_system_otp(OTP_DEVICE_BUS, OTP_DEVICE_CS); > + if (ret) > + return ret; > + > + ret = spi_claim_bus(slave); > + if (ret) { > + debug("SPI: Failed to claim SPI bus: %d\n", ret); > + return ret; > + } > + > + dout[0] = 0x48; > + dout[1] = 0x00; > + dout[2] = 0x10; /* Security Register #1 */ > + dout[3] = 0x00; > + dout[4] = 0x00; /* Dummy Byte */ > + > + ret = spi_write_then_read(slave, dout, sizeof(dout), NULL, (u8 *)&otp, > + sizeof(otp)); > + > + spi_release_bus(slave); > +#ifdef DEBUG > + show_otp_data(); > +#endif > + > + has_been_read = (ret == 0) ? 1 : 0; > + if (!is_valid_header()) > + goto data_invalid; > + > + if (crc32(0, (void *)&otp, sizeof(otp) - 4) == > + le32_to_cpu(otp.checksum)) > + data_valid = 1; > + > + if (!is_data_valid()) > + goto data_invalid; > + > + return 0; > + > +data_invalid: > + printf("Invalid board ID data!\n"); > + return -1; > +} > + > +int get_revision(int *major, int *minor) > +{ > + if (!is_data_valid()) > + return -1; > + > + *major = (otp.revision & 0xf0) >> 4; > + *minor = otp.revision & 0x0f; > + > + return 0; > +} > + > +const char *get_variant(void) > +{ > + const char* var_str[BOARD_VARIANT_MAX] = { > + "Unknown", > + "Engineering Sample", > + "4GB non ECC" > + }; > + > + if ((otp.variant < BOARD_VARIANT_ENG_SAMPLE) || > + (otp.variant >= BOARD_VARIANT_MAX)) > + return var_str[0]; > + > + return var_str[otp.variant]; > +} > + > +void set_board_info(void) > +{ > + char env_str[13]; > + > + if (!is_data_valid()) > + return; > + > + snprintf(env_str, sizeof(env_str), "%i.%i", (otp.revision & 0xf0) >> 4, otp.revision & 0x0f); > + env_set("board_rev", env_str); > + > + sprintf(env_str, "%012llx", *((uint64_t*) otp.serial_num) & > + 0xFFFFFFFFFFFF); > + > + env_set("serial#", env_str); > +} > + > +int mac_read_from_otp(void) > +{ > + unsigned int i; > + int ret; > + > + if (!is_data_valid()) > + return -1; > + > + for (i = 0; i < MAX_NUM_PORTS; i++) { > + char enetvar[9]; > + > + sprintf(enetvar, i ? "eth%daddr" : "ethaddr", i); > + > + if (!is_valid_ethaddr(otp.mac_addr[i])) { > + debug("Not valid %s!\n", enetvar); > + continue; > + } > + > + /* Only initialize environment variables that are blank > + * (i.e. have not yet been set) > + */ > + if (!env_get(enetvar)) > + eth_env_set_enetaddr(enetvar, otp.mac_addr[i]); > + } > + > + return ret; > +} > diff --git a/board/kobol/helios64/sys_otp.h b/board/kobol/helios64/sys_otp.h > new file mode 100644 > index 0000000000..48273d4a95 > --- /dev/null > +++ b/board/kobol/helios64/sys_otp.h > @@ -0,0 +1,12 @@ > +/* SPDX-License-Identifier: GPL-2.0+ */ > + > +#ifndef __HELIOS64_SYS_OTP_H > +#define __HELIOS64_SYS_OTP_H > + > +int read_otp_data(void); > +void set_board_info(void); > +int get_revision(int *major, int *minor); > +const char *get_variant(void); > +int mac_read_from_otp(void); > + > +#endif > diff --git a/configs/helios64-rk3399_defconfig b/configs/helios64-rk3399_defconfig > new file mode 100644 > index 0000000000..3b4ed62ab6 > --- /dev/null > +++ b/configs/helios64-rk3399_defconfig > @@ -0,0 +1,147 @@ > +CONFIG_ARM=y > +CONFIG_ARCH_ROCKCHIP=y > +CONFIG_SYS_TEXT_BASE=0x00200000 > +CONFIG_SPL_GPIO_SUPPORT=y > +CONFIG_ENV_OFFSET=0x3F8000 > +CONFIG_ROCKCHIP_RK3399=y > +CONFIG_ROCKCHIP_ADVANCED_RECOVERY=y > +CONFIG_ROCKCHIP_ADVANCED_RECOVERY_LED="helios64::status" > +# CONFIG_ROCKCHIP_ADVANCED_RECOVERY_ROCKUSB is not set > +CONFIG_TARGET_HELIOS64=y > +CONFIG_NR_DRAM_BANKS=1 > +CONFIG_DEBUG_UART_BASE=0xFF1A0000 > +CONFIG_DEBUG_UART_CLOCK=24000000 > +CONFIG_SPL_SPI_FLASH_SUPPORT=y > +CONFIG_SPL_SPI_SUPPORT=y > +CONFIG_DEBUG_UART=y > +CONFIG_AHCI=y > +# CONFIG_ANDROID_BOOT_IMAGE is not set > +CONFIG_OF_BOARD_SETUP=y > +CONFIG_USE_PREBOOT=y > +CONFIG_CONSOLE_MUX=y > +CONFIG_SYS_CONSOLE_ENV_OVERWRITE=y > +CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-kobol-helios64.dtb" > +CONFIG_MISC_INIT_R=y > +CONFIG_VERSION_VARIABLE=y > +# CONFIG_DISPLAY_BOARDINFO is not set > +CONFIG_DISPLAY_BOARDINFO_LATE=y > +CONFIG_BOARD_TYPES=y > +CONFIG_BOARD_EARLY_INIT_F=y > +CONFIG_BOARD_EARLY_INIT_R=y > +CONFIG_LAST_STAGE_INIT=y > +# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set > +CONFIG_SPL_STACK_R=y > +CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000 > +CONFIG_SPL_I2C_SUPPORT=y > +CONFIG_SPL_POWER_SUPPORT=y > +CONFIG_SPL_SPI_LOAD=y > +CONFIG_TPL=y > +CONFIG_CMD_CONFIG=y > +CONFIG_CMD_BOOTZ=y > +# CONFIG_BOOTM_PLAN9 is not set > +# CONFIG_BOOTM_RTEMS is not set > +# CONFIG_BOOTM_VXWORKS is not set > +CONFIG_CMD_BOOTEFI_HELLO=y > +CONFIG_CMD_BOOTMENU=y > +CONFIG_CRC32_VERIFY=y > +CONFIG_CMD_MD5SUM=y > +CONFIG_MD5SUM_VERIFY=y > +CONFIG_CMD_MEMINFO=y > +CONFIG_CMD_MX_CYCLIC=y > +CONFIG_CMD_SHA1SUM=y > +CONFIG_SHA1SUM_VERIFY=y > +CONFIG_CMD_STRINGS=y > +CONFIG_CMD_ADC=y > +CONFIG_CMD_GPIO=y > +CONFIG_CMD_GPT=y > +CONFIG_CMD_I2C=y > +CONFIG_CMD_MMC=y > +CONFIG_CMD_PCI=y > +CONFIG_CMD_POWEROFF=y > +CONFIG_CMD_READ=y > +CONFIG_CMD_SPI=y > +CONFIG_CMD_USB=y > +CONFIG_CMD_ROCKUSB=y > +CONFIG_CMD_USB_MASS_STORAGE=y > +CONFIG_CMD_EFIDEBUG=y > +CONFIG_CMD_EXCEPTION=y > +CONFIG_CMD_TIME=y > +CONFIG_CMD_PMIC=y > +CONFIG_CMD_REGULATOR=y > +CONFIG_CMD_FS_UUID=y > +CONFIG_PARTITION_TYPE_GUID=y > +CONFIG_SPL_OF_CONTROL=y > +CONFIG_OF_LIVE=y > +CONFIG_DEFAULT_DEVICE_TREE="rk3399-kobol-helios64" > +CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" > +CONFIG_ENV_IS_IN_MMC=y > +CONFIG_SYS_RELOC_GD_ENV_ADDR=y > +CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y > +CONFIG_IP_DEFRAG=y > +# CONFIG_DM_DEVICE_REMOVE is not set > +CONFIG_SCSI_AHCI=y > +CONFIG_AHCI_PCI=y > +CONFIG_SPL_FIRMWARE=y > +CONFIG_GPIO_HOG=y > +CONFIG_ROCKCHIP_GPIO=y > +CONFIG_DM_PCA953X=y > +CONFIG_I2C_SET_DEFAULT_BUS_NUM=y > +CONFIG_I2C_DEFAULT_BUS_NUMBER=0x8 > +CONFIG_SYS_I2C_ROCKCHIP=y > +CONFIG_LED=y > +CONFIG_LED_GPIO=y > +CONFIG_MISC=y > +CONFIG_ROCKCHIP_EFUSE=y > +CONFIG_ROCKCHIP_OTP=y > +CONFIG_MMC_DW=y > +CONFIG_MMC_DW_ROCKCHIP=y > +CONFIG_MMC_SDHCI=y > +CONFIG_MMC_SDHCI_ROCKCHIP=y > +CONFIG_SPI_FLASH_WINBOND=y > +CONFIG_PHY_REALTEK=y > +CONFIG_DM_ETH=y > +CONFIG_DM_MDIO=y > +CONFIG_PHY_GIGE=y > +CONFIG_ETH_DESIGNWARE=y > +CONFIG_RGMII=y > +CONFIG_MII=y > +CONFIG_GMAC_ROCKCHIP=y > +CONFIG_PCI=y > +CONFIG_PHY_ROCKCHIP_INNO_USB2=y > +CONFIG_PHY_ROCKCHIP_TYPEC=y > +CONFIG_DM_PMIC_FAN53555=y > +CONFIG_PMIC_RK8XX=y > +CONFIG_SPL_DM_REGULATOR=y > +CONFIG_REGULATOR_PWM=y > +CONFIG_SPL_DM_REGULATOR_FIXED=y > +CONFIG_DM_REGULATOR_GPIO=y > +CONFIG_SPL_DM_REGULATOR_GPIO=y > +CONFIG_REGULATOR_RK8XX=y > +CONFIG_PWM_ROCKCHIP=y > +CONFIG_RAM_RK3399_LPDDR4=y > +CONFIG_DM_RESET=y > +CONFIG_DM_RNG=y > +CONFIG_RNG_ROCKCHIP=y > +CONFIG_SCSI=y > +CONFIG_DM_SCSI=y > +CONFIG_BAUDRATE=1500000 > +CONFIG_DEBUG_UART_SHIFT=2 > +CONFIG_ROCKCHIP_SPI=y > +CONFIG_SYSRESET=y > +CONFIG_SYSRESET_SYSCON=y > +CONFIG_DM_THERMAL=y > +CONFIG_USB=y > +# CONFIG_SPL_DM_USB is not set > +CONFIG_USB_XHCI_HCD=y > +CONFIG_USB_XHCI_DWC3=y > +CONFIG_USB_EHCI_HCD=y > +CONFIG_USB_EHCI_GENERIC=y > +CONFIG_USB_DWC3=y > +CONFIG_USB_DWC3_GENERIC=y > +CONFIG_USB_GADGET=y > +CONFIG_USB_FUNCTION_ROCKUSB=y > +CONFIG_USB_HOST_ETHER=y > +CONFIG_USB_ETHER_RTL8152=y > +CONFIG_SPL_TINY_MEMSET=y > +CONFIG_ERRNO_STR=y > +CONFIG_HEXDUMP=y > diff --git a/include/configs/helios64.h b/include/configs/helios64.h > new file mode 100644 > index 0000000000..6fca9a6be0 > --- /dev/null > +++ b/include/configs/helios64.h > @@ -0,0 +1,47 @@ > +/* SPDX-License-Identifier: GPL-2.0+ */ > +/* > + * (C) Copyright 2020 Aditya Prayoga <aditya@kobol.io> > + */ > + > +#ifndef __HELIOS64_H > +#define __HELIOS64_H > + > +#include <configs/rk3399_common.h> > + > +#define SDRAM_BANK_SIZE (2UL << 30) > + > +#if defined(CONFIG_ENV_IS_IN_MMC) > + #define CONFIG_SYS_MMC_ENV_DEV 0 > +#elif defined(CONFIG_ENV_IS_IN_SPI_FLASH) > + #define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS > + #define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS > + #define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE > + #define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED > +#endif > + > + > +#ifndef CONFIG_SPL_BUILD > +#if CONFIG_IS_ENABLED(SCSI) > + > + #define CONFIG_SYS_SCSI_MAX_SCSI_ID 5 > + #define CONFIG_SYS_SCSI_MAX_LUN 1 > + #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ > + CONFIG_SYS_SCSI_MAX_LUN) > + > + #define BOOT_TARGET_SCSI(func) \ > + func(SCSI, scsi, 0) > +#else > + #define BOOT_TARGET_SCSI(func) > +#endif > + > +#undef BOOT_TARGET_DEVICES > +#define BOOT_TARGET_DEVICES(func) \ > + BOOT_TARGET_MMC(func) \ > + BOOT_TARGET_USB(func) \ > + BOOT_TARGET_SCSI(func) \ > + BOOT_TARGET_PXE(func) \ > + BOOT_TARGET_DHCP(func) > + > +#endif > + > +#endif > -- > 2.29.2 >
Oh, thanks for the pointer! I guess I should've had another look at the archive before posting the patch. If you see this Uwe, thanks for taking it on :) On Tue, Mar 2, 2021 at 7:27 PM Dennis Gilmore <dgilmore@fedoraproject.org> wrote: > Uwe submitted this board last Thursday > > Dennis > > On Tue, Mar 2, 2021 at 10:46 AM Christian Glombek > <lorbus@fedoraproject.org> wrote: > > > > The hardware is described in detail on Kobol's wiki at > > https://wiki.kobol.io/helios64/intro/. > > > > This commit is based on downstream work in Armbian by Aditya Prayoga [1]. > > The devicetree is taken from Linux v5.12-rc1 and was originally > submitted there by > > Uwe Kleine-Koenig [2]. > > > > [1] > https://github.com/ukleinek/armbian-build/blob/35c85295d351830aa59b624db524ba04b238faae/patch/kernel/rockchip64-current/add-board-helios64.patch > > [2] > https://github.com/torvalds/linux/blob/7a7fd0de4a9804299793e564a555a49c1fc924cb/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts > > --- > > arch/arm/dts/Makefile | 1 + > > .../arm/dts/rk3399-kobol-helios64-u-boot.dtsi | 136 +++++++ > > arch/arm/dts/rk3399-kobol-helios64.dts | 372 ++++++++++++++++++ > > arch/arm/mach-rockchip/rk3399/Kconfig | 17 + > > board/kobol/helios64/Kconfig | 24 ++ > > board/kobol/helios64/MAINTAINERS | 6 + > > board/kobol/helios64/Makefile | 5 + > > board/kobol/helios64/helios64.c | 304 ++++++++++++++ > > board/kobol/helios64/sys_otp.c | 250 ++++++++++++ > > board/kobol/helios64/sys_otp.h | 12 + > > configs/helios64-rk3399_defconfig | 147 +++++++ > > include/configs/helios64.h | 47 +++ > > 12 files changed, 1321 insertions(+) > > create mode 100644 arch/arm/dts/rk3399-kobol-helios64-u-boot.dtsi > > create mode 100644 arch/arm/dts/rk3399-kobol-helios64.dts > > create mode 100644 board/kobol/helios64/Kconfig > > create mode 100644 board/kobol/helios64/MAINTAINERS > > create mode 100644 board/kobol/helios64/Makefile > > create mode 100644 board/kobol/helios64/helios64.c > > create mode 100644 board/kobol/helios64/sys_otp.c > > create mode 100644 board/kobol/helios64/sys_otp.h > > create mode 100644 configs/helios64-rk3399_defconfig > > create mode 100644 include/configs/helios64.h > > > > diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile > > index 33e483f4fb..2c820bc2b7 100644 > > --- a/arch/arm/dts/Makefile > > +++ b/arch/arm/dts/Makefile > > @@ -124,6 +124,7 @@ dtb-$(CONFIG_ROCKCHIP_RK3399) += \ > > rk3399-ficus.dtb \ > > rk3399-firefly.dtb \ > > rk3399-gru-bob.dtb \ > > + rk3399-kobol-helios64.dtb \ > > rk3399-khadas-edge.dtb \ > > rk3399-khadas-edge-captain.dtb \ > > rk3399-khadas-edge-v.dtb \ > > diff --git a/arch/arm/dts/rk3399-kobol-helios64-u-boot.dtsi > b/arch/arm/dts/rk3399-kobol-helios64-u-boot.dtsi > > new file mode 100644 > > index 0000000000..6fe9d59df3 > > --- /dev/null > > +++ b/arch/arm/dts/rk3399-kobol-helios64-u-boot.dtsi > > @@ -0,0 +1,136 @@ > > +// SPDX-License-Identifier: GPL-2.0+ > > +/* > > + * Copyright (c) 2020 Aditya Prayoga <aditya@kobol.io> > > + */ > > + > > +#include "rk3399-u-boot.dtsi" > > +#include "rk3399-sdram-lpddr4-100.dtsi" > > +/ { > > + aliases { > > + spi0 = &spi1; > > + spi1 = &spi2; > > + spi2 = &spi5; > > + ethernet0 = &gmac; > > + ethernet1 = &usb_lan; > > + }; > > + > > + chosen { > > + bootargs = "earlycon=uart8250,mmio32,0xff1a0000 > earlyprintk"; > > + stdout-path = "serial2:1500000n8"; > > + u-boot,spl-boot-order = "same-as-spl", &spiflash, > &sdmmc, &sdhci; > > + }; > > + > > + config { > > + u-boot,spl-payload-offset = <0x80000>; /* @ 512KB */ > > + }; > > +}; > > + > > +&gpio1 { > > + usb-mux-hs { > > + gpio-hog; > > + gpios = <RK_PA4 GPIO_ACTIVE_HIGH>; > > + output-low; > > + line-name = "USB_MUX_HS"; > > + }; > > + > > + usb-mux-oe { > > + gpio-hog; > > + gpios = <RK_PB5 GPIO_ACTIVE_LOW>; > > + output-high; > > + line-name = "USB_MUX_OE#"; > > + }; > > + > > + soc-flash-wp { > > + gpio-hog; > > + gpios = <RK_PC2 GPIO_ACTIVE_LOW>; > > + output-low; > > + line-name = "SOC_WP#"; > > + }; > > +}; > > + > > +&gpio2 { > > + sata-flash-wp { > > + gpio-hog; > > + gpios = <RK_PD0 GPIO_ACTIVE_LOW>; > > + output-high; > > + line-name = "SATA_WP#_LV"; > > + }; > > +}; > > + > > +&gpio4 { > > + auto-on-en-d { > > + gpio-hog; > > + gpios = <RK_PD1 GPIO_ACTIVE_HIGH>; > > + output-low; > > + line-name = "AUTO_ON_EN_D"; > > + }; > > + > > + auto-on-en-clk { > > + gpio-hog; > > + gpios = <RK_PD2 GPIO_ACTIVE_HIGH>; > > + output-low; > > + line-name = "AUTO_ON_EN_CLK"; > > + }; > > + > > + board-rev-id-0 { > > + gpio-hog; > > + gpios = <RK_PD5 GPIO_ACTIVE_HIGH>; > > + input; > > + }; > > + > > + board-rev-id-1 { > > + gpio-hog; > > + gpios = <RK_PD6 GPIO_ACTIVE_HIGH>; > > + input; > > + }; > > +}; > > + > > +&int_hub { > > + compatible = "usb-hub"; > > + usb,device-class = <USB_CLASS_HUB>; > > +}; > > + > > +&pcie_prst { > > + rockchip,pins = > > + <2 RK_PD4 RK_FUNC_GPIO &pcfg_output_low>; > > +}; > > + > > +&pcie_pwr_en { > > + rockchip,pins = > > + <1 RK_PD0 RK_FUNC_GPIO &pcfg_output_low>; > > +}; > > + > > +&pinctrl { > > + usb { > > + usb_mux_hs: usb-mux-hs { > > + rockchip,pins = > > + <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; > > + }; > > + > > + usb_mux_oe: usb-mux-oe { > > + rockchip,pins = > > + <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; > > + }; > > + }; > > +}; > > + > > +&spi1 { > > + spiflash: flash@0 { > > + compatible = "jedec,spi-nor"; > > + reg = <0x0>; > > + spi-max-frequency = <25000000>; > > + status = "okay"; > > + m25p,fast-read; > > + u-boot,dm-pre-reloc; > > + }; > > +}; > > + > > +&vdd_center { > > + regulator-min-microvolt = <950000>; > > + regulator-max-microvolt = <950000>; > > + regulator-init-microvolt = <950000>; > > +}; > > + > > +&vdd_log { > > + regulator-init-microvolt = <900000>; > > +}; > > diff --git a/arch/arm/dts/rk3399-kobol-helios64.dts > b/arch/arm/dts/rk3399-kobol-helios64.dts > > new file mode 100644 > > index 0000000000..66c725a342 > > --- /dev/null > > +++ b/arch/arm/dts/rk3399-kobol-helios64.dts > > @@ -0,0 +1,372 @@ > > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > > +/* > > + * Copyright (c) 2020 Aditya Prayoga <aditya@kobol.io> > > + */ > > + > > +/* > > + * The Kobol Helios64 is a board designed to operate as a NAS and > optionally > > + * ships with an enclosing that can host five 2.5" hard disks. > > + * > > + * See https://wiki.kobol.io/helios64/intro/ for further details. > > + */ > > + > > +/dts-v1/; > > +#include "rk3399.dtsi" > > +#include "rk3399-opp.dtsi" > > + > > +/ { > > + model = "Kobol Helios64"; > > + compatible = "kobol,helios64", "rockchip,rk3399"; > > + > > + avdd_1v8_s0: avdd-1v8-s0 { > > + compatible = "regulator-fixed"; > > + regulator-name = "avdd_1v8_s0"; > > + regulator-always-on; > > + regulator-boot-on; > > + regulator-min-microvolt = <1800000>; > > + regulator-max-microvolt = <1800000>; > > + vin-supply = <&vcc3v3_sys_s3>; > > + }; > > + > > + clkin_gmac: external-gmac-clock { > > + compatible = "fixed-clock"; > > + clock-frequency = <125000000>; > > + clock-output-names = "clkin_gmac"; > > + #clock-cells = <0>; > > + }; > > + > > + leds { > > + compatible = "gpio-leds"; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&sys_grn_led_on &sys_red_led_on>; > > + > > + led-0 { > > + label = "helios64:green:status"; > > + gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>; > > + default-state = "on"; > > + }; > > + > > + led-1 { > > + label = "helios64:red:fault"; > > + gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>; > > + default-state = "keep"; > > + }; > > + }; > > + > > + vcc1v8_sys_s0: vcc1v8-sys-s0 { > > + compatible = "regulator-fixed"; > > + regulator-name = "vcc1v8_sys_s0"; > > + regulator-always-on; > > + regulator-boot-on; > > + regulator-min-microvolt = <1800000>; > > + regulator-max-microvolt = <1800000>; > > + vin-supply = <&vcc1v8_sys_s3>; > > + }; > > + > > + vcc3v0_sd: vcc3v0-sd { > > + compatible = "regulator-fixed"; > > + enable-active-high; > > + gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>; > > + regulator-name = "vcc3v0_sd"; > > + regulator-boot-on; > > + regulator-min-microvolt = <3000000>; > > + regulator-max-microvolt = <3000000>; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&sdmmc0_pwr_h>; > > + vin-supply = <&vcc3v3_sys_s3>; > > + }; > > + > > + vcc3v3_sys_s3: vcc_lan: vcc3v3-sys-s3 { > > + compatible = "regulator-fixed"; > > + regulator-name = "vcc3v3_sys_s3"; > > + regulator-always-on; > > + regulator-boot-on; > > + regulator-min-microvolt = <3300000>; > > + regulator-max-microvolt = <3300000>; > > + vin-supply = <&vcc5v0_sys>; > > + > > + regulator-state-mem { > > + regulator-on-in-suspend; > > + }; > > + }; > > + > > + vcc5v0_sys: vcc5v0-sys { > > + compatible = "regulator-fixed"; > > + regulator-name = "vcc5v0_sys"; > > + regulator-always-on; > > + regulator-boot-on; > > + regulator-min-microvolt = <5000000>; > > + regulator-max-microvolt = <5000000>; > > + vin-supply = <&vcc12v_dcin_bkup>; > > + > > + regulator-state-mem { > > + regulator-on-in-suspend; > > + }; > > + }; > > + > > + vcc12v_dcin: vcc12v-dcin { > > + compatible = "regulator-fixed"; > > + regulator-name = "vcc12v_dcin"; > > + regulator-always-on; > > + regulator-boot-on; > > + regulator-min-microvolt = <12000000>; > > + regulator-max-microvolt = <12000000>; > > + }; > > + > > + vcc12v_dcin_bkup: vcc12v-dcin-bkup { > > + compatible = "regulator-fixed"; > > + regulator-name = "vcc12v_dcin_bkup"; > > + regulator-always-on; > > + regulator-boot-on; > > + regulator-min-microvolt = <12000000>; > > + regulator-max-microvolt = <12000000>; > > + vin-supply = <&vcc12v_dcin>; > > + }; > > +}; > > + > > +/* > > + * The system doesn't run stable with cpu freq enabled, so disallow the > lower > > + * frequencies until this problem is properly understood and resolved. > > + */ > > +&cluster0_opp { > > + /delete-node/ opp00; > > + /delete-node/ opp01; > > + /delete-node/ opp02; > > + /delete-node/ opp03; > > + /delete-node/ opp04; > > +}; > > + > > +&cluster1_opp { > > + /delete-node/ opp00; > > + /delete-node/ opp01; > > + /delete-node/ opp02; > > + /delete-node/ opp03; > > + /delete-node/ opp04; > > + /delete-node/ opp05; > > + /delete-node/ opp06; > > +}; > > + > > +&cpu_b0 { > > + cpu-supply = <&vdd_cpu_b>; > > +}; > > + > > +&cpu_b1 { > > + cpu-supply = <&vdd_cpu_b>; > > +}; > > + > > +&cpu_l0 { > > + cpu-supply = <&vdd_cpu_l>; > > +}; > > + > > +&cpu_l1 { > > + cpu-supply = <&vdd_cpu_l>; > > +}; > > + > > +&cpu_l2 { > > + cpu-supply = <&vdd_cpu_l>; > > +}; > > + > > +&cpu_l3 { > > + cpu-supply = <&vdd_cpu_l>; > > +}; > > + > > +&emmc_phy { > > + status = "okay"; > > +}; > > + > > +&gmac { > > + assigned-clock-parents = <&clkin_gmac>; > > + assigned-clocks = <&cru SCLK_RMII_SRC>; > > + clock_in_out = "input"; > > + phy-mode = "rgmii"; > > + phy-supply = <&vcc_lan>; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&rgmii_pins &gphy_reset>; > > + rx_delay = <0x20>; > > + tx_delay = <0x28>; > > + snps,reset-active-low; > > + snps,reset-delays-us = <0 10000 50000>; > > + snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; > > + status = "okay"; > > +}; > > + > > +&i2c0 { > > + clock-frequency = <400000>; > > + i2c-scl-rising-time-ns = <168>; > > + i2c-scl-falling-time-ns = <4>; > > + status = "okay"; > > + > > + rk808: pmic@1b { > > + compatible = "rockchip,rk808"; > > + reg = <0x1b>; > > + interrupt-parent = <&gpio0>; > > + interrupts = <10 IRQ_TYPE_LEVEL_LOW>; > > + clock-output-names = "xin32k", "rk808-clkout2"; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&pmic_int_l>; > > + vcc1-supply = <&vcc5v0_sys>; > > + vcc2-supply = <&vcc5v0_sys>; > > + vcc3-supply = <&vcc5v0_sys>; > > + vcc4-supply = <&vcc5v0_sys>; > > + vcc6-supply = <&vcc5v0_sys>; > > + vcc7-supply = <&vcc5v0_sys>; > > + vcc8-supply = <&vcc3v3_sys_s3>; > > + vcc9-supply = <&vcc5v0_sys>; > > + vcc10-supply = <&vcc5v0_sys>; > > + vcc11-supply = <&vcc5v0_sys>; > > + vcc12-supply = <&vcc3v3_sys_s3>; > > + vddio-supply = <&vcc3v0_s3>; > > + wakeup-source; > > + #clock-cells = <1>; > > + > > + regulators { > > + vdd_cpu_l: DCDC_REG2 { > > + regulator-name = "vdd_cpu_l"; > > + regulator-always-on; > > + regulator-boot-on; > > + regulator-min-microvolt = <750000>; > > + regulator-max-microvolt = <1350000>; > > + regulator-ramp-delay = <6001>; > > + > > + regulator-state-mem { > > + regulator-off-in-suspend; > > + }; > > + }; > > + > > + vcc1v8_sys_s3: DCDC_REG4 { > > + regulator-name = "vcc1v8_sys_s3"; > > + regulator-always-on; > > + regulator-boot-on; > > + regulator-min-microvolt = <1800000>; > > + regulator-max-microvolt = <1800000>; > > + > > + regulator-state-mem { > > + regulator-on-in-suspend; > > + regulator-suspend-microvolt = > <1800000>; > > + }; > > + }; > > + > > + vcc_sdio_s0: LDO_REG4 { > > + regulator-name = "vcc_sdio_s0"; > > + regulator-always-on; > > + regulator-boot-on; > > + regulator-min-microvolt = <1800000>; > > + regulator-max-microvolt = <3000000>; > > + > > + regulator-state-mem { > > + regulator-on-in-suspend; > > + regulator-suspend-microvolt = > <3000000>; > > + }; > > + }; > > + > > + vcc3v0_s3: LDO_REG8 { > > + regulator-name = "vcc3v0_s3"; > > + regulator-always-on; > > + regulator-boot-on; > > + regulator-min-microvolt = <3000000>; > > + regulator-max-microvolt = <3000000>; > > + > > + regulator-state-mem { > > + regulator-on-in-suspend; > > + regulator-suspend-microvolt = > <3000000>; > > + }; > > + }; > > + }; > > + }; > > + > > + vdd_cpu_b: regulator@40 { > > + compatible = "silergy,syr827"; > > + reg = <0x40>; > > + fcs,suspend-voltage-selector = <1>; > > + regulator-name = "vdd_cpu_b"; > > + regulator-always-on; > > + regulator-boot-on; > > + regulator-min-microvolt = <712500>; > > + regulator-max-microvolt = <1500000>; > > + regulator-ramp-delay = <1000>; > > + vin-supply = <&vcc5v0_sys>; > > + > > + regulator-state-mem { > > + regulator-off-in-suspend; > > + }; > > + }; > > +}; > > + > > +&i2c2 { > > + clock-frequency = <400000>; > > + i2c-scl-rising-time-ns = <160>; > > + i2c-scl-falling-time-ns = <30>; > > + status = "okay"; > > + > > + temp@4c { > > + compatible = "national,lm75"; > > + reg = <0x4c>; > > + }; > > +}; > > + > > +&io_domains { > > + audio-supply = <&vcc1v8_sys_s0>; > > + bt656-supply = <&vcc1v8_sys_s0>; > > + gpio1830-supply = <&vcc3v0_s3>; > > + sdmmc-supply = <&vcc_sdio_s0>; > > + status = "okay"; > > +}; > > + > > +&pinctrl { > > + gmac { > > + gphy_reset: gphy-reset { > > + rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO > &pcfg_output_low>; > > + }; > > + }; > > + > > + leds { > > + sys_grn_led_on: sys-grn-led-on { > > + rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO > &pcfg_pull_down>; > > + }; > > + > > + sys_red_led_on: sys-red-led-on { > > + rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO > &pcfg_pull_down>; > > + }; > > + }; > > + > > + pmic { > > + pmic_int_l: pmic-int-l { > > + rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO > &pcfg_pull_none>; > > + }; > > + }; > > + > > + vcc3v0-sd { > > + sdmmc0_pwr_h: sdmmc0-pwr-h { > > + rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO > &pcfg_pull_up>; > > + }; > > + }; > > +}; > > + > > +&pmu_io_domains { > > + pmu1830-supply = <&vcc3v0_s3>; > > + status = "okay"; > > +}; > > + > > +&sdhci { > > + bus-width = <8>; > > + mmc-hs200-1_8v; > > + non-removable; > > + vqmmc-supply = <&vcc1v8_sys_s0>; > > + status = "okay"; > > +}; > > + > > +&sdmmc { > > + bus-width = <4>; > > + cap-sd-highspeed; > > + cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>; > > + disable-wp; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; > > + vmmc-supply = <&vcc3v0_sd>; > > + vqmmc-supply = <&vcc_sdio_s0>; > > + status = "okay"; > > +}; > > + > > +&uart2 { > > + status = "okay"; > > +}; > > diff --git a/arch/arm/mach-rockchip/rk3399/Kconfig > b/arch/arm/mach-rockchip/rk3399/Kconfig > > index 17628f9171..7890bafe56 100644 > > --- a/arch/arm/mach-rockchip/rk3399/Kconfig > > +++ b/arch/arm/mach-rockchip/rk3399/Kconfig > > @@ -28,6 +28,22 @@ config TARGET_PINEBOOK_PRO_RK3399 > > with 4Gb RAM, onboard eMMC, USB-C, a USB3 and USB2 port, > > 1920*1080 screen and all the usual laptop features. > > > > +config TARGET_HELIOS64 > > + bool "Kobol Innovations Helios64" > > + select BOARD_LATE_INIT > > + help > > + Helios64 is a Network Attached Storage board based on Rockchip > RK3399. > > + > > + Key features of the Helios64 include: > > + * on-board PCIe to 5 Ports SATA Controller JMB585 > > + * on-board USB 3.0 hub (3x USB 3.0 host) > > + * USB Type-C (Support DisplayPort Alt Mode) > > + * on-board 1 Gigabit Ethernet > > + * on-board 2.5 Gigabit Ethernet (Realtek RTL8156) > > + * on-board eMMC > > + * on-board LPDDR4 > > + * SPI, I2C, UART, GPIO > > + > > config TARGET_PUMA_RK3399 > > bool "Theobroma Systems RK3399-Q7 (Puma)" > > help > > @@ -153,6 +169,7 @@ endif # BOOTCOUNT_LIMIT > > > > source "board/firefly/roc-pc-rk3399/Kconfig" > > source "board/google/gru/Kconfig" > > +source "board/kobol/helios64/Kconfig" > > source "board/pine64/pinebook-pro-rk3399/Kconfig" > > source "board/pine64/rockpro64_rk3399/Kconfig" > > source "board/rockchip/evb_rk3399/Kconfig" > > diff --git a/board/kobol/helios64/Kconfig b/board/kobol/helios64/Kconfig > > new file mode 100644 > > index 0000000000..644cdbd8f3 > > --- /dev/null > > +++ b/board/kobol/helios64/Kconfig > > @@ -0,0 +1,24 @@ > > +if TARGET_HELIOS64 > > + > > +config SYS_BOARD > > + default "helios64" > > + > > +config SYS_VENDOR > > + default "kobol" > > + > > +config SYS_CONFIG_NAME > > + default "helios64" > > + > > +config BOARD_SPECIFIC_OPTIONS # dummy > > + def_bool y > > + > > +config ENV_SECT_SIZE > > + default 0x1000 if ENV_IS_IN_SPI_FLASH > > + > > +config ENV_SIZE > > + default 0x8000 > > + > > +config ENV_OFFSET > > + default 0x460000 if ENV_IS_IN_SPI_FLASH > > + > > +endif > > diff --git a/board/kobol/helios64/MAINTAINERS > b/board/kobol/helios64/MAINTAINERS > > new file mode 100644 > > index 0000000000..646644d485 > > --- /dev/null > > +++ b/board/kobol/helios64/MAINTAINERS > > @@ -0,0 +1,6 @@ > > +HELIOS64 BOARD > > +M: Christian Glombek <lorbus@fedoraproject.org> > > +S: Maintained > > +F: board/kobol/helios64/ > > +F: include/configs/helios64.h > > +F: configs/helios64_defconfig > > diff --git a/board/kobol/helios64/Makefile > b/board/kobol/helios64/Makefile > > new file mode 100644 > > index 0000000000..ab34245a6d > > --- /dev/null > > +++ b/board/kobol/helios64/Makefile > > @@ -0,0 +1,5 @@ > > +# SPDX-License-Identifier: GPL-2.0+ > > +# > > +# Copyright (C) 2020 Aditya Prayoga <aditya@kobol.io> > > + > > +obj-y := helios64.o sys_otp.o > > diff --git a/board/kobol/helios64/helios64.c > b/board/kobol/helios64/helios64.c > > new file mode 100644 > > index 0000000000..86349339fb > > --- /dev/null > > +++ b/board/kobol/helios64/helios64.c > > @@ -0,0 +1,304 @@ > > +// SPDX-License-Identifier: GPL-2.0+ > > +/* > > + * (C) Copyright 2020 Aditya Prayoga <aditya@kobol.io> > > + */ > > + > > +#include <common.h> > > +#include <dm.h> > > +#include <env.h> > > +#include <log.h> > > +#include <led.h> > > +#include <pci.h> > > +#include <power/regulator.h> > > +#include <scsi.h> > > +#include <spl_gpio.h> > > +#include <syscon.h> > > +#include <usb.h> > > +#include <linux/delay.h> > > +#include <asm/io.h> > > +#include <asm/gpio.h> > > +#include <asm/arch-rockchip/clock.h> > > +#include <asm/arch-rockchip/gpio.h> > > +#include <asm/arch-rockchip/grf_rk3399.h> > > +#include <asm/arch-rockchip/hardware.h> > > +#include <asm/arch-rockchip/misc.h> > > +#include <asm/arch-rockchip/periph.h> > > + > > +#include "sys_otp.h" > > + > > +#ifndef CONFIG_TPL_BUILD > > +int board_early_init_f(void) > > +{ > > +#ifdef CONFIG_SPL_BUILD > > +#define GPIO0_BASE 0xff720000 > > +#define GRF_BASE 0xff770000 > > + struct rk3399_grf_regs * const grf = (void *)GRF_BASE; > > + struct rockchip_gpio_regs * const gpio = (void *)GPIO0_BASE; > > + > > + /* Turn ON status LED. At this stage, FDT & DM is not > initialized yet */ > > + spl_gpio_output(gpio, GPIO(BANK_B, 4), 1); > > +#endif > > + return 0; > > +} > > +#endif > > + > > +#ifndef CONFIG_SPL_BUILD > > +int board_early_init_r(void) > > +{ > > + read_otp_data(); > > + return 0; > > +} > > +#endif > > + > > +#ifdef CONFIG_MISC_INIT_R > > +#define GRF_IO_VSEL_BT565_SHIFT 0 > > +#define GRF_IO_VSEL_AUDIO_SHIFT 1 > > +#define GRF_IO_VSEL_SDMMC_SHIFT 2 > > +#define GRF_IO_VSEL_GPIO1830_SHIFT 3 > > + > > +#define PMUGRF_CON0_VSEL_SHIFT 8 > > +#define PMUGRF_CON0_PMU1830_VOL_SHIFT 9 > > +static void setup_iodomain(void) > > +{ > > + struct rk3399_grf_regs *grf = > > + syscon_get_first_range(ROCKCHIP_SYSCON_GRF); > > + struct rk3399_pmugrf_regs *pmugrf = > > + syscon_get_first_range(ROCKCHIP_SYSCON_PMUGRF); > > + > > + /* BT565 is in 1.8v domain */ > > + rk_setreg(&grf->io_vsel, 1 << GRF_IO_VSEL_BT565_SHIFT); > > + > > + /* AUDIO is in 1.8v domain */ > > + rk_setreg(&grf->io_vsel, 1 << GRF_IO_VSEL_AUDIO_SHIFT); > > + > > + /* SDMMC is in 3.0v domain */ > > + rk_setreg(&grf->io_vsel, 0 << GRF_IO_VSEL_SDMMC_SHIFT); > > + > > + /* GPIO1830 is in 3.0v domain */ > > + rk_setreg(&grf->io_vsel, 0 << GRF_IO_VSEL_GPIO1830_SHIFT); > > + > > + /* Set GPIO1 1.8v/3.0v source select to PMU1830_VOL */ > > + rk_setreg(&pmugrf->soc_con0, 1 << PMUGRF_CON0_VSEL_SHIFT); > > + rk_setreg(&pmugrf->soc_con0, 0 << PMUGRF_CON0_PMU1830_VOL_SHIFT); > > +} > > + > > +/* > > + * Swap mmc0 and mmc1 in boot_targets if booted from SD-Card. > > + * > > + * If bootsource is uSD-card we can assume that we want to use the > > + * SD-Card instead of the eMMC as first boot_target for distroboot. > > + * We only want to swap the defaults and not any custom environment a > > + * user has set. We exit early if a changed boot_targets environment > > + * is detected. > > + */ > > +static int setup_boottargets(void) > > +{ > > + const char *boot_device = > > + ofnode_read_chosen_string("u-boot,spl-boot-device"); > > + char *env_default, *env; > > + > > + if (!boot_device) { > > + debug("%s: /chosen/u-boot,spl-boot-device not set\n", > > + __func__); > > + return -1; > > + } > > + debug("%s: booted from %s\n", __func__, boot_device); > > + > > + env_default = env_get_default("boot_targets"); > > + env = env_get("boot_targets"); > > + if (!env) { > > + debug("%s: boot_targets does not exist\n", __func__); > > + return -1; > > + } > > + debug("%s: boot_targets current: %s - default: %s\n", > > + __func__, env, env_default); > > + > > + if (strcmp(env_default, env) != 0) { > > + debug("%s: boot_targets not default, don't change it\n", > > + __func__); > > + return 0; > > + } > > + > > + /* > > + * Only run, if booting from mmc1 (i.e. /mmc@fe320000) and > > + * only consider cases where the default boot-order first > > + * tries to boot from mmc0 (eMMC) and then from mmc1 > > + * (i.e. external SD). > > + * > > + * In other words: the SD card will be moved to earlier in the > > + * order, if U-Boot was also loaded from the SD-card. > > + */ > > + if (!strcmp(boot_device, "/mmc@fe320000")) { > > + char *mmc0, *mmc1; > > + > > + debug("%s: booted from SD-Card\n", __func__); > > + mmc0 = strstr(env, "mmc0"); > > + mmc1 = strstr(env, "mmc1"); > > + > > + if (!mmc0 || !mmc1) { > > + debug("%s: only one mmc boot_target found\n", > __func__); > > + return -1; > > + } > > + > > + /* > > + * If mmc0 comes first in the boot order, we need to > change > > + * the strings to make mmc1 first. > > + */ > > + if (mmc0 < mmc1) { > > + mmc0[3] = '1'; > > + mmc1[3] = '0'; > > + debug("%s: set boot_targets to: %s\n", __func__, > env); > > + env_set("boot_targets", env); > > + } > > + } > > + > > + return 0; > > +} > > + > > +static void setup_leds(void) > > +{ > > + struct udevice *dev; > > + > > + led_get_by_label("helios64::status", &dev); > > + led_set_state(dev, LEDST_OFF); > > + mdelay(250); > > + led_set_state(dev, LEDST_ON); > > +} > > + > > +int misc_init_r(void) > > +{ > > + const u32 cpuid_offset = 0x7; > > + const u32 cpuid_length = 0x10; > > + u8 cpuid[cpuid_length]; > > + int ret; > > + > > + setup_iodomain(); > > + set_board_info(); > > + > > + ret = rockchip_cpuid_from_efuse(cpuid_offset, cpuid_length, > cpuid); > > + if (ret) > > + return ret; > > + > > + ret = rockchip_cpuid_set(cpuid, cpuid_length); > > + if (ret) > > + return ret; > > + > > + if (mac_read_from_otp()) > > + ret = rockchip_setup_macaddr(); > > + > > + setup_boottargets(); > > + setup_leds(); > > + > > + return ret; > > +} > > +#endif > > + > > +#ifdef CONFIG_ROCKCHIP_ADVANCED_RECOVERY > > +void rockchip_prepare_download_mode(void) > > +{ > > + struct gpio_desc *enable, *mux; > > + > > + if (gpio_hog_lookup_name("USB_MUX_OE#", &enable)) { > > + debug("Fail to get USB_MUX_OE\n"); > > + return; > > + } > > + > > + if (gpio_hog_lookup_name("USB_MUX_HS", &mux)) { > > + debug("Fail to get USB_MUX_HS\n"); > > + return; > > + } > > + > > + dm_gpio_set_value(enable, 0); > > + mdelay(100); > > + dm_gpio_set_value(mux, 1); > > + mdelay(100); > > + dm_gpio_set_value(enable, 1); > > +} > > +#endif > > + > > +#ifdef CONFIG_LAST_STAGE_INIT > > +static void auto_power_enable(void) > > +{ > > + struct gpio_desc *enable, *clock; > > + > > + if (gpio_hog_lookup_name("AUTO_ON_EN_D", &enable)) { > > + debug("Fail to get AUTO_ON_EN_D\n"); > > + return; > > + } > > + > > + if (gpio_hog_lookup_name("AUTO_ON_EN_CLK", &clock)) { > > + debug("Fail to get AUTO_ON_EN_CLK\n"); > > + return; > > + } > > + > > + dm_gpio_set_value(enable, 1); > > + dm_gpio_set_value(clock, 1); > > + mdelay(10); > > + dm_gpio_set_value(clock, 0); > > +} > > + > > +static void sata_power_enable(void) > > +{ > > + struct udevice *rail_a, *rail_b; > > + int ret; > > + > > + ret = regulator_get_by_platname("power_hdd_a", &rail_a); > > + if (!ret) { > > + ret = regulator_set_enable(rail_a, true); > > + if (!ret) > > + mdelay(10000); > > + } > > + > > + ret = regulator_get_by_platname("power_hdd_b", &rail_b); > > + if (!ret) > > + ret = regulator_set_enable(rail_b, true); > > + > > +} > > + > > +int last_stage_init(void) > > +{ > > + auto_power_enable(); > > + sata_power_enable(); > > + > > +#ifdef CONFIG_PCI > > + scsi_scan(true); > > +#endif > > + > > + return 0; > > +} > > +#endif > > + > > +#if defined(CONFIG_DISPLAY_BOARDINFO_LATE) > > +int checkboard(void) > > +{ > > + int major, minor; > > + > > + printf("Revision: "); > > + > > + if (!get_revision(&major, &minor)) > > + printf("%i.%i - %s\n", major, minor, get_variant()); > > + else > > + printf("UNKNOWN\n"); > > + > > + return 0; > > +} > > +#endif > > + > > +#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) > > +int ft_board_setup(void *blob, struct bd_info *bd) > > +{ > > + char *env; > > + > > + env = env_get("board_rev"); > > + if (env) > > + fdt_setprop_string(blob, fdt_path_offset(blob, "/"), > > + "kobol,board-rev", env); > > + > > + env = env_get("cpuid#"); > > + if (env) > > + fdt_setprop_string(blob, fdt_path_offset(blob, "/"), > > + "kobol,cpu-id", env); > > + > > + return 0; > > +} > > +#endif > > diff --git a/board/kobol/helios64/sys_otp.c > b/board/kobol/helios64/sys_otp.c > > new file mode 100644 > > index 0000000000..8c20693c0e > > --- /dev/null > > +++ b/board/kobol/helios64/sys_otp.c > > @@ -0,0 +1,250 @@ > > +/* SPDX-License-Identifier: GPL-2.0+ */ > > + > > +#include <linux/types.h> > > +#include <dm.h> > > +#include <spi.h> > > +#include <log.h> > > +#include <net.h> > > +#include <u-boot/crc.h> > > + > > +#include "sys_otp.h" > > + > > +#define OTP_DEVICE_BUS 0 > > +#define OTP_DEVICE_CS 0 > > +#define MAX_NUM_PORTS 2 > > + > > +enum board_variant { > > + BOARD_VARIANT_INVALID = 0, > > + BOARD_VARIANT_ENG_SAMPLE, > > + BOARD_VARIANT_4G_PROD_NO_ECC, > > + BOARD_VARIANT_MAX > > +}; > > + > > +struct __attribute__ ((__packed__)) otp_data_t { > > + u8 magic[8]; > > + u8 part_num[16]; > > + u8 variant; > > + u8 revision; > > + u8 serial_num[6]; > > + u8 mfg_year[2]; > > + u8 mfg_month; > > + u8 mfg_day; > > + u8 mac_addr[MAX_NUM_PORTS][6]; > > + u8 reserved[204]; > > + u32 checksum; > > +} otp; > > + > > +static struct spi_slave *slave; > > +static int has_been_read = 0; > > +static int data_valid = 0; > > + > > +static inline int is_data_valid(void) > > +{ > > + return data_valid; > > +} > > + > > +static inline int is_valid_header(void) > > +{ > > + if ((otp.magic[0] == 'H') || (otp.magic[1] == '6') || > > + (otp.magic[2] == '4') || (otp.magic[3] == 'N') || > > + (otp.magic[4] == 'P') || (otp.magic[5] == 'V') || > > + (otp.magic[6] == '1') || (otp.magic[7] == 0)) > > + > > + return 1; > > + > > + return 0; > > +} > > + > > +static int init_system_otp(int bus, int cs) > > +{ > > + int ret; > > + char name[30], *str; > > + struct udevice *dev; > > + > > + snprintf(name, sizeof(name), "generic_%d:%d", bus, cs); > > + str = strdup(name); > > + if (!str) > > + return -ENOMEM; > > + ret = spi_get_bus_and_cs(bus, cs, 25000000, > CONFIG_DEFAULT_SPI_MODE, "spi_generic_drv", > > + str, &dev, &slave); > > + return ret; > > +} > > + > > +#ifdef DEBUG > > +/** > > + * show_otp_data - display the contents of the OTP register > > + */ > > +static void show_otp_data(void) > > +{ > > + u32 i; > > + u32 crc; > > + > > + const char* var_str[BOARD_VARIANT_MAX] = { > > + "Invalid variant", > > + "Engineering Sample", > > + "Production - 4GB non ECC" > > + }; > > + > > + printf("\n"); > > + printf("Register dump: (%lu bytes)\n", sizeof(otp)); > > + for (i = 0; i < sizeof(otp); i++) { > > + if ((i % 16) == 0) > > + printf("%02X: ", i); > > + printf("%02X ", ((u8 *)&otp)[i]); > > + if (((i % 16) == 15) || (i == sizeof(otp) - 1)) > > + printf("\n"); > > + } > > + > > + if (!is_valid_header()) > > + return; > > + > > + printf("Part Number: %s\n", otp.part_num); > > + printf("Variant: %s\n", var_str[otp.variant]); > > + printf("Revision: %x.%x\n", (otp.revision & 0xf0) >> 4, > otp.revision & 0x0f); > > + printf("Serial Number: %012llx\n", *((uint64_t*) otp.serial_num) > & > > + 0xFFFFFFFFFFFF); > > + printf("Manufacturing Date: %02X-%02X-%04X (DD-MM-YYYY)\n", > otp.mfg_day, > > + otp.mfg_month, *(u16*) otp.mfg_year); > > + > > + printf("1GbE MAC Address: %02X:%02X:%02X:%02X:%02X:%02X\n", > > + otp.mac_addr[0][0], otp.mac_addr[0][1], > otp.mac_addr[0][2], > > + otp.mac_addr[0][3], otp.mac_addr[0][4], > otp.mac_addr[0][5]); > > + > > + printf("2.5GbE MAC Address: %02X:%02X:%02X:%02X:%02X:%02X\n", > > + otp.mac_addr[1][0], otp.mac_addr[1][1], > otp.mac_addr[1][2], > > + otp.mac_addr[1][3], otp.mac_addr[1][4], > otp.mac_addr[1][5]); > > + > > + crc = crc32(0, (void *)&otp, sizeof(otp) - 4); > > + > > + if (crc == le32_to_cpu(otp.checksum)) > > + printf("CRC: %08x\n\n", le32_to_cpu(otp.checksum)); > > + else > > + printf("CRC: %08x (should be %08x)\n\n", > > + le32_to_cpu(otp.checksum), crc); > > + > > +} > > +#endif > > + > > +int read_otp_data(void) > > +{ > > + int ret; > > + u8 dout[5]; > > + > > + if (has_been_read) { > > + if (is_data_valid()) > > + return 0; > > + else > > + goto data_invalid; > > + } > > + > > + ret = init_system_otp(OTP_DEVICE_BUS, OTP_DEVICE_CS); > > + if (ret) > > + return ret; > > + > > + ret = spi_claim_bus(slave); > > + if (ret) { > > + debug("SPI: Failed to claim SPI bus: %d\n", ret); > > + return ret; > > + } > > + > > + dout[0] = 0x48; > > + dout[1] = 0x00; > > + dout[2] = 0x10; /* Security Register #1 */ > > + dout[3] = 0x00; > > + dout[4] = 0x00; /* Dummy Byte */ > > + > > + ret = spi_write_then_read(slave, dout, sizeof(dout), NULL, (u8 > *)&otp, > > + sizeof(otp)); > > + > > + spi_release_bus(slave); > > +#ifdef DEBUG > > + show_otp_data(); > > +#endif > > + > > + has_been_read = (ret == 0) ? 1 : 0; > > + if (!is_valid_header()) > > + goto data_invalid; > > + > > + if (crc32(0, (void *)&otp, sizeof(otp) - 4) == > > + le32_to_cpu(otp.checksum)) > > + data_valid = 1; > > + > > + if (!is_data_valid()) > > + goto data_invalid; > > + > > + return 0; > > + > > +data_invalid: > > + printf("Invalid board ID data!\n"); > > + return -1; > > +} > > + > > +int get_revision(int *major, int *minor) > > +{ > > + if (!is_data_valid()) > > + return -1; > > + > > + *major = (otp.revision & 0xf0) >> 4; > > + *minor = otp.revision & 0x0f; > > + > > + return 0; > > +} > > + > > +const char *get_variant(void) > > +{ > > + const char* var_str[BOARD_VARIANT_MAX] = { > > + "Unknown", > > + "Engineering Sample", > > + "4GB non ECC" > > + }; > > + > > + if ((otp.variant < BOARD_VARIANT_ENG_SAMPLE) || > > + (otp.variant >= BOARD_VARIANT_MAX)) > > + return var_str[0]; > > + > > + return var_str[otp.variant]; > > +} > > + > > +void set_board_info(void) > > +{ > > + char env_str[13]; > > + > > + if (!is_data_valid()) > > + return; > > + > > + snprintf(env_str, sizeof(env_str), "%i.%i", (otp.revision & > 0xf0) >> 4, otp.revision & 0x0f); > > + env_set("board_rev", env_str); > > + > > + sprintf(env_str, "%012llx", *((uint64_t*) otp.serial_num) & > > + 0xFFFFFFFFFFFF); > > + > > + env_set("serial#", env_str); > > +} > > + > > +int mac_read_from_otp(void) > > +{ > > + unsigned int i; > > + int ret; > > + > > + if (!is_data_valid()) > > + return -1; > > + > > + for (i = 0; i < MAX_NUM_PORTS; i++) { > > + char enetvar[9]; > > + > > + sprintf(enetvar, i ? "eth%daddr" : "ethaddr", i); > > + > > + if (!is_valid_ethaddr(otp.mac_addr[i])) { > > + debug("Not valid %s!\n", enetvar); > > + continue; > > + } > > + > > + /* Only initialize environment variables that are blank > > + * (i.e. have not yet been set) > > + */ > > + if (!env_get(enetvar)) > > + eth_env_set_enetaddr(enetvar, otp.mac_addr[i]); > > + } > > + > > + return ret; > > +} > > diff --git a/board/kobol/helios64/sys_otp.h > b/board/kobol/helios64/sys_otp.h > > new file mode 100644 > > index 0000000000..48273d4a95 > > --- /dev/null > > +++ b/board/kobol/helios64/sys_otp.h > > @@ -0,0 +1,12 @@ > > +/* SPDX-License-Identifier: GPL-2.0+ */ > > + > > +#ifndef __HELIOS64_SYS_OTP_H > > +#define __HELIOS64_SYS_OTP_H > > + > > +int read_otp_data(void); > > +void set_board_info(void); > > +int get_revision(int *major, int *minor); > > +const char *get_variant(void); > > +int mac_read_from_otp(void); > > + > > +#endif > > diff --git a/configs/helios64-rk3399_defconfig > b/configs/helios64-rk3399_defconfig > > new file mode 100644 > > index 0000000000..3b4ed62ab6 > > --- /dev/null > > +++ b/configs/helios64-rk3399_defconfig > > @@ -0,0 +1,147 @@ > > +CONFIG_ARM=y > > +CONFIG_ARCH_ROCKCHIP=y > > +CONFIG_SYS_TEXT_BASE=0x00200000 > > +CONFIG_SPL_GPIO_SUPPORT=y > > +CONFIG_ENV_OFFSET=0x3F8000 > > +CONFIG_ROCKCHIP_RK3399=y > > +CONFIG_ROCKCHIP_ADVANCED_RECOVERY=y > > +CONFIG_ROCKCHIP_ADVANCED_RECOVERY_LED="helios64::status" > > +# CONFIG_ROCKCHIP_ADVANCED_RECOVERY_ROCKUSB is not set > > +CONFIG_TARGET_HELIOS64=y > > +CONFIG_NR_DRAM_BANKS=1 > > +CONFIG_DEBUG_UART_BASE=0xFF1A0000 > > +CONFIG_DEBUG_UART_CLOCK=24000000 > > +CONFIG_SPL_SPI_FLASH_SUPPORT=y > > +CONFIG_SPL_SPI_SUPPORT=y > > +CONFIG_DEBUG_UART=y > > +CONFIG_AHCI=y > > +# CONFIG_ANDROID_BOOT_IMAGE is not set > > +CONFIG_OF_BOARD_SETUP=y > > +CONFIG_USE_PREBOOT=y > > +CONFIG_CONSOLE_MUX=y > > +CONFIG_SYS_CONSOLE_ENV_OVERWRITE=y > > +CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-kobol-helios64.dtb" > > +CONFIG_MISC_INIT_R=y > > +CONFIG_VERSION_VARIABLE=y > > +# CONFIG_DISPLAY_BOARDINFO is not set > > +CONFIG_DISPLAY_BOARDINFO_LATE=y > > +CONFIG_BOARD_TYPES=y > > +CONFIG_BOARD_EARLY_INIT_F=y > > +CONFIG_BOARD_EARLY_INIT_R=y > > +CONFIG_LAST_STAGE_INIT=y > > +# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set > > +CONFIG_SPL_STACK_R=y > > +CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000 > > +CONFIG_SPL_I2C_SUPPORT=y > > +CONFIG_SPL_POWER_SUPPORT=y > > +CONFIG_SPL_SPI_LOAD=y > > +CONFIG_TPL=y > > +CONFIG_CMD_CONFIG=y > > +CONFIG_CMD_BOOTZ=y > > +# CONFIG_BOOTM_PLAN9 is not set > > +# CONFIG_BOOTM_RTEMS is not set > > +# CONFIG_BOOTM_VXWORKS is not set > > +CONFIG_CMD_BOOTEFI_HELLO=y > > +CONFIG_CMD_BOOTMENU=y > > +CONFIG_CRC32_VERIFY=y > > +CONFIG_CMD_MD5SUM=y > > +CONFIG_MD5SUM_VERIFY=y > > +CONFIG_CMD_MEMINFO=y > > +CONFIG_CMD_MX_CYCLIC=y > > +CONFIG_CMD_SHA1SUM=y > > +CONFIG_SHA1SUM_VERIFY=y > > +CONFIG_CMD_STRINGS=y > > +CONFIG_CMD_ADC=y > > +CONFIG_CMD_GPIO=y > > +CONFIG_CMD_GPT=y > > +CONFIG_CMD_I2C=y > > +CONFIG_CMD_MMC=y > > +CONFIG_CMD_PCI=y > > +CONFIG_CMD_POWEROFF=y > > +CONFIG_CMD_READ=y > > +CONFIG_CMD_SPI=y > > +CONFIG_CMD_USB=y > > +CONFIG_CMD_ROCKUSB=y > > +CONFIG_CMD_USB_MASS_STORAGE=y > > +CONFIG_CMD_EFIDEBUG=y > > +CONFIG_CMD_EXCEPTION=y > > +CONFIG_CMD_TIME=y > > +CONFIG_CMD_PMIC=y > > +CONFIG_CMD_REGULATOR=y > > +CONFIG_CMD_FS_UUID=y > > +CONFIG_PARTITION_TYPE_GUID=y > > +CONFIG_SPL_OF_CONTROL=y > > +CONFIG_OF_LIVE=y > > +CONFIG_DEFAULT_DEVICE_TREE="rk3399-kobol-helios64" > > +CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names > interrupt-parent assigned-clocks assigned-clock-rates > assigned-clock-parents" > > +CONFIG_ENV_IS_IN_MMC=y > > +CONFIG_SYS_RELOC_GD_ENV_ADDR=y > > +CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y > > +CONFIG_IP_DEFRAG=y > > +# CONFIG_DM_DEVICE_REMOVE is not set > > +CONFIG_SCSI_AHCI=y > > +CONFIG_AHCI_PCI=y > > +CONFIG_SPL_FIRMWARE=y > > +CONFIG_GPIO_HOG=y > > +CONFIG_ROCKCHIP_GPIO=y > > +CONFIG_DM_PCA953X=y > > +CONFIG_I2C_SET_DEFAULT_BUS_NUM=y > > +CONFIG_I2C_DEFAULT_BUS_NUMBER=0x8 > > +CONFIG_SYS_I2C_ROCKCHIP=y > > +CONFIG_LED=y > > +CONFIG_LED_GPIO=y > > +CONFIG_MISC=y > > +CONFIG_ROCKCHIP_EFUSE=y > > +CONFIG_ROCKCHIP_OTP=y > > +CONFIG_MMC_DW=y > > +CONFIG_MMC_DW_ROCKCHIP=y > > +CONFIG_MMC_SDHCI=y > > +CONFIG_MMC_SDHCI_ROCKCHIP=y > > +CONFIG_SPI_FLASH_WINBOND=y > > +CONFIG_PHY_REALTEK=y > > +CONFIG_DM_ETH=y > > +CONFIG_DM_MDIO=y > > +CONFIG_PHY_GIGE=y > > +CONFIG_ETH_DESIGNWARE=y > > +CONFIG_RGMII=y > > +CONFIG_MII=y > > +CONFIG_GMAC_ROCKCHIP=y > > +CONFIG_PCI=y > > +CONFIG_PHY_ROCKCHIP_INNO_USB2=y > > +CONFIG_PHY_ROCKCHIP_TYPEC=y > > +CONFIG_DM_PMIC_FAN53555=y > > +CONFIG_PMIC_RK8XX=y > > +CONFIG_SPL_DM_REGULATOR=y > > +CONFIG_REGULATOR_PWM=y > > +CONFIG_SPL_DM_REGULATOR_FIXED=y > > +CONFIG_DM_REGULATOR_GPIO=y > > +CONFIG_SPL_DM_REGULATOR_GPIO=y > > +CONFIG_REGULATOR_RK8XX=y > > +CONFIG_PWM_ROCKCHIP=y > > +CONFIG_RAM_RK3399_LPDDR4=y > > +CONFIG_DM_RESET=y > > +CONFIG_DM_RNG=y > > +CONFIG_RNG_ROCKCHIP=y > > +CONFIG_SCSI=y > > +CONFIG_DM_SCSI=y > > +CONFIG_BAUDRATE=1500000 > > +CONFIG_DEBUG_UART_SHIFT=2 > > +CONFIG_ROCKCHIP_SPI=y > > +CONFIG_SYSRESET=y > > +CONFIG_SYSRESET_SYSCON=y > > +CONFIG_DM_THERMAL=y > > +CONFIG_USB=y > > +# CONFIG_SPL_DM_USB is not set > > +CONFIG_USB_XHCI_HCD=y > > +CONFIG_USB_XHCI_DWC3=y > > +CONFIG_USB_EHCI_HCD=y > > +CONFIG_USB_EHCI_GENERIC=y > > +CONFIG_USB_DWC3=y > > +CONFIG_USB_DWC3_GENERIC=y > > +CONFIG_USB_GADGET=y > > +CONFIG_USB_FUNCTION_ROCKUSB=y > > +CONFIG_USB_HOST_ETHER=y > > +CONFIG_USB_ETHER_RTL8152=y > > +CONFIG_SPL_TINY_MEMSET=y > > +CONFIG_ERRNO_STR=y > > +CONFIG_HEXDUMP=y > > diff --git a/include/configs/helios64.h b/include/configs/helios64.h > > new file mode 100644 > > index 0000000000..6fca9a6be0 > > --- /dev/null > > +++ b/include/configs/helios64.h > > @@ -0,0 +1,47 @@ > > +/* SPDX-License-Identifier: GPL-2.0+ */ > > +/* > > + * (C) Copyright 2020 Aditya Prayoga <aditya@kobol.io> > > + */ > > + > > +#ifndef __HELIOS64_H > > +#define __HELIOS64_H > > + > > +#include <configs/rk3399_common.h> > > + > > +#define SDRAM_BANK_SIZE (2UL << 30) > > + > > +#if defined(CONFIG_ENV_IS_IN_MMC) > > + #define CONFIG_SYS_MMC_ENV_DEV 0 > > +#elif defined(CONFIG_ENV_IS_IN_SPI_FLASH) > > + #define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS > > + #define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS > > + #define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE > > + #define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED > > +#endif > > + > > + > > +#ifndef CONFIG_SPL_BUILD > > +#if CONFIG_IS_ENABLED(SCSI) > > + > > + #define CONFIG_SYS_SCSI_MAX_SCSI_ID 5 > > + #define CONFIG_SYS_SCSI_MAX_LUN 1 > > + #define CONFIG_SYS_SCSI_MAX_DEVICE > (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ > > + CONFIG_SYS_SCSI_MAX_LUN) > > + > > + #define BOOT_TARGET_SCSI(func) \ > > + func(SCSI, scsi, 0) > > +#else > > + #define BOOT_TARGET_SCSI(func) > > +#endif > > + > > +#undef BOOT_TARGET_DEVICES > > +#define BOOT_TARGET_DEVICES(func) \ > > + BOOT_TARGET_MMC(func) \ > > + BOOT_TARGET_USB(func) \ > > + BOOT_TARGET_SCSI(func) \ > > + BOOT_TARGET_PXE(func) \ > > + BOOT_TARGET_DHCP(func) > > + > > +#endif > > + > > +#endif > > -- > > 2.29.2 > > > >
Hi Christian, Thanks for your patch, We need the dts from mainline kernel instead of github. And you'd better split the dts and board support into different patches. Thanks, - Kever On 2021/3/3 上午12:45, Christian Glombek wrote: > The hardware is described in detail on Kobol's wiki at > https://wiki.kobol.io/helios64/intro/. > > This commit is based on downstream work in Armbian by Aditya Prayoga [1]. > The devicetree is taken from Linux v5.12-rc1 and was originally submitted there by > Uwe Kleine-Koenig [2]. > > [1] https://github.com/ukleinek/armbian-build/blob/35c85295d351830aa59b624db524ba04b238faae/patch/kernel/rockchip64-current/add-board-helios64.patch > [2] https://github.com/torvalds/linux/blob/7a7fd0de4a9804299793e564a555a49c1fc924cb/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts > --- > arch/arm/dts/Makefile | 1 + > .../arm/dts/rk3399-kobol-helios64-u-boot.dtsi | 136 +++++++ > arch/arm/dts/rk3399-kobol-helios64.dts | 372 ++++++++++++++++++ > arch/arm/mach-rockchip/rk3399/Kconfig | 17 + > board/kobol/helios64/Kconfig | 24 ++ > board/kobol/helios64/MAINTAINERS | 6 + > board/kobol/helios64/Makefile | 5 + > board/kobol/helios64/helios64.c | 304 ++++++++++++++ > board/kobol/helios64/sys_otp.c | 250 ++++++++++++ > board/kobol/helios64/sys_otp.h | 12 + > configs/helios64-rk3399_defconfig | 147 +++++++ > include/configs/helios64.h | 47 +++ > 12 files changed, 1321 insertions(+) > create mode 100644 arch/arm/dts/rk3399-kobol-helios64-u-boot.dtsi > create mode 100644 arch/arm/dts/rk3399-kobol-helios64.dts > create mode 100644 board/kobol/helios64/Kconfig > create mode 100644 board/kobol/helios64/MAINTAINERS > create mode 100644 board/kobol/helios64/Makefile > create mode 100644 board/kobol/helios64/helios64.c > create mode 100644 board/kobol/helios64/sys_otp.c > create mode 100644 board/kobol/helios64/sys_otp.h > create mode 100644 configs/helios64-rk3399_defconfig > create mode 100644 include/configs/helios64.h > > diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile > index 33e483f4fb..2c820bc2b7 100644 > --- a/arch/arm/dts/Makefile > +++ b/arch/arm/dts/Makefile > @@ -124,6 +124,7 @@ dtb-$(CONFIG_ROCKCHIP_RK3399) += \ > rk3399-ficus.dtb \ > rk3399-firefly.dtb \ > rk3399-gru-bob.dtb \ > + rk3399-kobol-helios64.dtb \ > rk3399-khadas-edge.dtb \ > rk3399-khadas-edge-captain.dtb \ > rk3399-khadas-edge-v.dtb \ > diff --git a/arch/arm/dts/rk3399-kobol-helios64-u-boot.dtsi b/arch/arm/dts/rk3399-kobol-helios64-u-boot.dtsi > new file mode 100644 > index 0000000000..6fe9d59df3 > --- /dev/null > +++ b/arch/arm/dts/rk3399-kobol-helios64-u-boot.dtsi > @@ -0,0 +1,136 @@ > +// SPDX-License-Identifier: GPL-2.0+ > +/* > + * Copyright (c) 2020 Aditya Prayoga <aditya@kobol.io> > + */ > + > +#include "rk3399-u-boot.dtsi" > +#include "rk3399-sdram-lpddr4-100.dtsi" > +/ { > + aliases { > + spi0 = &spi1; > + spi1 = &spi2; > + spi2 = &spi5; > + ethernet0 = &gmac; > + ethernet1 = &usb_lan; > + }; > + > + chosen { > + bootargs = "earlycon=uart8250,mmio32,0xff1a0000 earlyprintk"; > + stdout-path = "serial2:1500000n8"; > + u-boot,spl-boot-order = "same-as-spl", &spiflash, &sdmmc, &sdhci; > + }; > + > + config { > + u-boot,spl-payload-offset = <0x80000>; /* @ 512KB */ > + }; > +}; > + > +&gpio1 { > + usb-mux-hs { > + gpio-hog; > + gpios = <RK_PA4 GPIO_ACTIVE_HIGH>; > + output-low; > + line-name = "USB_MUX_HS"; > + }; > + > + usb-mux-oe { > + gpio-hog; > + gpios = <RK_PB5 GPIO_ACTIVE_LOW>; > + output-high; > + line-name = "USB_MUX_OE#"; > + }; > + > + soc-flash-wp { > + gpio-hog; > + gpios = <RK_PC2 GPIO_ACTIVE_LOW>; > + output-low; > + line-name = "SOC_WP#"; > + }; > +}; > + > +&gpio2 { > + sata-flash-wp { > + gpio-hog; > + gpios = <RK_PD0 GPIO_ACTIVE_LOW>; > + output-high; > + line-name = "SATA_WP#_LV"; > + }; > +}; > + > +&gpio4 { > + auto-on-en-d { > + gpio-hog; > + gpios = <RK_PD1 GPIO_ACTIVE_HIGH>; > + output-low; > + line-name = "AUTO_ON_EN_D"; > + }; > + > + auto-on-en-clk { > + gpio-hog; > + gpios = <RK_PD2 GPIO_ACTIVE_HIGH>; > + output-low; > + line-name = "AUTO_ON_EN_CLK"; > + }; > + > + board-rev-id-0 { > + gpio-hog; > + gpios = <RK_PD5 GPIO_ACTIVE_HIGH>; > + input; > + }; > + > + board-rev-id-1 { > + gpio-hog; > + gpios = <RK_PD6 GPIO_ACTIVE_HIGH>; > + input; > + }; > +}; > + > +&int_hub { > + compatible = "usb-hub"; > + usb,device-class = <USB_CLASS_HUB>; > +}; > + > +&pcie_prst { > + rockchip,pins = > + <2 RK_PD4 RK_FUNC_GPIO &pcfg_output_low>; > +}; > + > +&pcie_pwr_en { > + rockchip,pins = > + <1 RK_PD0 RK_FUNC_GPIO &pcfg_output_low>; > +}; > + > +&pinctrl { > + usb { > + usb_mux_hs: usb-mux-hs { > + rockchip,pins = > + <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + > + usb_mux_oe: usb-mux-oe { > + rockchip,pins = > + <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + }; > +}; > + > +&spi1 { > + spiflash: flash@0 { > + compatible = "jedec,spi-nor"; > + reg = <0x0>; > + spi-max-frequency = <25000000>; > + status = "okay"; > + m25p,fast-read; > + u-boot,dm-pre-reloc; > + }; > +}; > + > +&vdd_center { > + regulator-min-microvolt = <950000>; > + regulator-max-microvolt = <950000>; > + regulator-init-microvolt = <950000>; > +}; > + > +&vdd_log { > + regulator-init-microvolt = <900000>; > +}; > diff --git a/arch/arm/dts/rk3399-kobol-helios64.dts b/arch/arm/dts/rk3399-kobol-helios64.dts > new file mode 100644 > index 0000000000..66c725a342 > --- /dev/null > +++ b/arch/arm/dts/rk3399-kobol-helios64.dts > @@ -0,0 +1,372 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > +/* > + * Copyright (c) 2020 Aditya Prayoga <aditya@kobol.io> > + */ > + > +/* > + * The Kobol Helios64 is a board designed to operate as a NAS and optionally > + * ships with an enclosing that can host five 2.5" hard disks. > + * > + * See https://wiki.kobol.io/helios64/intro/ for further details. > + */ > + > +/dts-v1/; > +#include "rk3399.dtsi" > +#include "rk3399-opp.dtsi" > + > +/ { > + model = "Kobol Helios64"; > + compatible = "kobol,helios64", "rockchip,rk3399"; > + > + avdd_1v8_s0: avdd-1v8-s0 { > + compatible = "regulator-fixed"; > + regulator-name = "avdd_1v8_s0"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + vin-supply = <&vcc3v3_sys_s3>; > + }; > + > + clkin_gmac: external-gmac-clock { > + compatible = "fixed-clock"; > + clock-frequency = <125000000>; > + clock-output-names = "clkin_gmac"; > + #clock-cells = <0>; > + }; > + > + leds { > + compatible = "gpio-leds"; > + pinctrl-names = "default"; > + pinctrl-0 = <&sys_grn_led_on &sys_red_led_on>; > + > + led-0 { > + label = "helios64:green:status"; > + gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>; > + default-state = "on"; > + }; > + > + led-1 { > + label = "helios64:red:fault"; > + gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>; > + default-state = "keep"; > + }; > + }; > + > + vcc1v8_sys_s0: vcc1v8-sys-s0 { > + compatible = "regulator-fixed"; > + regulator-name = "vcc1v8_sys_s0"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + vin-supply = <&vcc1v8_sys_s3>; > + }; > + > + vcc3v0_sd: vcc3v0-sd { > + compatible = "regulator-fixed"; > + enable-active-high; > + gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>; > + regulator-name = "vcc3v0_sd"; > + regulator-boot-on; > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3000000>; > + pinctrl-names = "default"; > + pinctrl-0 = <&sdmmc0_pwr_h>; > + vin-supply = <&vcc3v3_sys_s3>; > + }; > + > + vcc3v3_sys_s3: vcc_lan: vcc3v3-sys-s3 { > + compatible = "regulator-fixed"; > + regulator-name = "vcc3v3_sys_s3"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + vin-supply = <&vcc5v0_sys>; > + > + regulator-state-mem { > + regulator-on-in-suspend; > + }; > + }; > + > + vcc5v0_sys: vcc5v0-sys { > + compatible = "regulator-fixed"; > + regulator-name = "vcc5v0_sys"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + vin-supply = <&vcc12v_dcin_bkup>; > + > + regulator-state-mem { > + regulator-on-in-suspend; > + }; > + }; > + > + vcc12v_dcin: vcc12v-dcin { > + compatible = "regulator-fixed"; > + regulator-name = "vcc12v_dcin"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <12000000>; > + regulator-max-microvolt = <12000000>; > + }; > + > + vcc12v_dcin_bkup: vcc12v-dcin-bkup { > + compatible = "regulator-fixed"; > + regulator-name = "vcc12v_dcin_bkup"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <12000000>; > + regulator-max-microvolt = <12000000>; > + vin-supply = <&vcc12v_dcin>; > + }; > +}; > + > +/* > + * The system doesn't run stable with cpu freq enabled, so disallow the lower > + * frequencies until this problem is properly understood and resolved. > + */ > +&cluster0_opp { > + /delete-node/ opp00; > + /delete-node/ opp01; > + /delete-node/ opp02; > + /delete-node/ opp03; > + /delete-node/ opp04; > +}; > + > +&cluster1_opp { > + /delete-node/ opp00; > + /delete-node/ opp01; > + /delete-node/ opp02; > + /delete-node/ opp03; > + /delete-node/ opp04; > + /delete-node/ opp05; > + /delete-node/ opp06; > +}; > + > +&cpu_b0 { > + cpu-supply = <&vdd_cpu_b>; > +}; > + > +&cpu_b1 { > + cpu-supply = <&vdd_cpu_b>; > +}; > + > +&cpu_l0 { > + cpu-supply = <&vdd_cpu_l>; > +}; > + > +&cpu_l1 { > + cpu-supply = <&vdd_cpu_l>; > +}; > + > +&cpu_l2 { > + cpu-supply = <&vdd_cpu_l>; > +}; > + > +&cpu_l3 { > + cpu-supply = <&vdd_cpu_l>; > +}; > + > +&emmc_phy { > + status = "okay"; > +}; > + > +&gmac { > + assigned-clock-parents = <&clkin_gmac>; > + assigned-clocks = <&cru SCLK_RMII_SRC>; > + clock_in_out = "input"; > + phy-mode = "rgmii"; > + phy-supply = <&vcc_lan>; > + pinctrl-names = "default"; > + pinctrl-0 = <&rgmii_pins &gphy_reset>; > + rx_delay = <0x20>; > + tx_delay = <0x28>; > + snps,reset-active-low; > + snps,reset-delays-us = <0 10000 50000>; > + snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; > + status = "okay"; > +}; > + > +&i2c0 { > + clock-frequency = <400000>; > + i2c-scl-rising-time-ns = <168>; > + i2c-scl-falling-time-ns = <4>; > + status = "okay"; > + > + rk808: pmic@1b { > + compatible = "rockchip,rk808"; > + reg = <0x1b>; > + interrupt-parent = <&gpio0>; > + interrupts = <10 IRQ_TYPE_LEVEL_LOW>; > + clock-output-names = "xin32k", "rk808-clkout2"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pmic_int_l>; > + vcc1-supply = <&vcc5v0_sys>; > + vcc2-supply = <&vcc5v0_sys>; > + vcc3-supply = <&vcc5v0_sys>; > + vcc4-supply = <&vcc5v0_sys>; > + vcc6-supply = <&vcc5v0_sys>; > + vcc7-supply = <&vcc5v0_sys>; > + vcc8-supply = <&vcc3v3_sys_s3>; > + vcc9-supply = <&vcc5v0_sys>; > + vcc10-supply = <&vcc5v0_sys>; > + vcc11-supply = <&vcc5v0_sys>; > + vcc12-supply = <&vcc3v3_sys_s3>; > + vddio-supply = <&vcc3v0_s3>; > + wakeup-source; > + #clock-cells = <1>; > + > + regulators { > + vdd_cpu_l: DCDC_REG2 { > + regulator-name = "vdd_cpu_l"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <750000>; > + regulator-max-microvolt = <1350000>; > + regulator-ramp-delay = <6001>; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vcc1v8_sys_s3: DCDC_REG4 { > + regulator-name = "vcc1v8_sys_s3"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <1800000>; > + }; > + }; > + > + vcc_sdio_s0: LDO_REG4 { > + regulator-name = "vcc_sdio_s0"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3000000>; > + > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <3000000>; > + }; > + }; > + > + vcc3v0_s3: LDO_REG8 { > + regulator-name = "vcc3v0_s3"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3000000>; > + > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <3000000>; > + }; > + }; > + }; > + }; > + > + vdd_cpu_b: regulator@40 { > + compatible = "silergy,syr827"; > + reg = <0x40>; > + fcs,suspend-voltage-selector = <1>; > + regulator-name = "vdd_cpu_b"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <712500>; > + regulator-max-microvolt = <1500000>; > + regulator-ramp-delay = <1000>; > + vin-supply = <&vcc5v0_sys>; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > +}; > + > +&i2c2 { > + clock-frequency = <400000>; > + i2c-scl-rising-time-ns = <160>; > + i2c-scl-falling-time-ns = <30>; > + status = "okay"; > + > + temp@4c { > + compatible = "national,lm75"; > + reg = <0x4c>; > + }; > +}; > + > +&io_domains { > + audio-supply = <&vcc1v8_sys_s0>; > + bt656-supply = <&vcc1v8_sys_s0>; > + gpio1830-supply = <&vcc3v0_s3>; > + sdmmc-supply = <&vcc_sdio_s0>; > + status = "okay"; > +}; > + > +&pinctrl { > + gmac { > + gphy_reset: gphy-reset { > + rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_output_low>; > + }; > + }; > + > + leds { > + sys_grn_led_on: sys-grn-led-on { > + rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_down>; > + }; > + > + sys_red_led_on: sys-red-led-on { > + rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_down>; > + }; > + }; > + > + pmic { > + pmic_int_l: pmic-int-l { > + rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + }; > + > + vcc3v0-sd { > + sdmmc0_pwr_h: sdmmc0-pwr-h { > + rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>; > + }; > + }; > +}; > + > +&pmu_io_domains { > + pmu1830-supply = <&vcc3v0_s3>; > + status = "okay"; > +}; > + > +&sdhci { > + bus-width = <8>; > + mmc-hs200-1_8v; > + non-removable; > + vqmmc-supply = <&vcc1v8_sys_s0>; > + status = "okay"; > +}; > + > +&sdmmc { > + bus-width = <4>; > + cap-sd-highspeed; > + cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>; > + disable-wp; > + pinctrl-names = "default"; > + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; > + vmmc-supply = <&vcc3v0_sd>; > + vqmmc-supply = <&vcc_sdio_s0>; > + status = "okay"; > +}; > + > +&uart2 { > + status = "okay"; > +}; > diff --git a/arch/arm/mach-rockchip/rk3399/Kconfig b/arch/arm/mach-rockchip/rk3399/Kconfig > index 17628f9171..7890bafe56 100644 > --- a/arch/arm/mach-rockchip/rk3399/Kconfig > +++ b/arch/arm/mach-rockchip/rk3399/Kconfig > @@ -28,6 +28,22 @@ config TARGET_PINEBOOK_PRO_RK3399 > with 4Gb RAM, onboard eMMC, USB-C, a USB3 and USB2 port, > 1920*1080 screen and all the usual laptop features. > > +config TARGET_HELIOS64 > + bool "Kobol Innovations Helios64" > + select BOARD_LATE_INIT > + help > + Helios64 is a Network Attached Storage board based on Rockchip RK3399. > + > + Key features of the Helios64 include: > + * on-board PCIe to 5 Ports SATA Controller JMB585 > + * on-board USB 3.0 hub (3x USB 3.0 host) > + * USB Type-C (Support DisplayPort Alt Mode) > + * on-board 1 Gigabit Ethernet > + * on-board 2.5 Gigabit Ethernet (Realtek RTL8156) > + * on-board eMMC > + * on-board LPDDR4 > + * SPI, I2C, UART, GPIO > + > config TARGET_PUMA_RK3399 > bool "Theobroma Systems RK3399-Q7 (Puma)" > help > @@ -153,6 +169,7 @@ endif # BOOTCOUNT_LIMIT > > source "board/firefly/roc-pc-rk3399/Kconfig" > source "board/google/gru/Kconfig" > +source "board/kobol/helios64/Kconfig" > source "board/pine64/pinebook-pro-rk3399/Kconfig" > source "board/pine64/rockpro64_rk3399/Kconfig" > source "board/rockchip/evb_rk3399/Kconfig" > diff --git a/board/kobol/helios64/Kconfig b/board/kobol/helios64/Kconfig > new file mode 100644 > index 0000000000..644cdbd8f3 > --- /dev/null > +++ b/board/kobol/helios64/Kconfig > @@ -0,0 +1,24 @@ > +if TARGET_HELIOS64 > + > +config SYS_BOARD > + default "helios64" > + > +config SYS_VENDOR > + default "kobol" > + > +config SYS_CONFIG_NAME > + default "helios64" > + > +config BOARD_SPECIFIC_OPTIONS # dummy > + def_bool y > + > +config ENV_SECT_SIZE > + default 0x1000 if ENV_IS_IN_SPI_FLASH > + > +config ENV_SIZE > + default 0x8000 > + > +config ENV_OFFSET > + default 0x460000 if ENV_IS_IN_SPI_FLASH > + > +endif > diff --git a/board/kobol/helios64/MAINTAINERS b/board/kobol/helios64/MAINTAINERS > new file mode 100644 > index 0000000000..646644d485 > --- /dev/null > +++ b/board/kobol/helios64/MAINTAINERS > @@ -0,0 +1,6 @@ > +HELIOS64 BOARD > +M: Christian Glombek <lorbus@fedoraproject.org> > +S: Maintained > +F: board/kobol/helios64/ > +F: include/configs/helios64.h > +F: configs/helios64_defconfig > diff --git a/board/kobol/helios64/Makefile b/board/kobol/helios64/Makefile > new file mode 100644 > index 0000000000..ab34245a6d > --- /dev/null > +++ b/board/kobol/helios64/Makefile > @@ -0,0 +1,5 @@ > +# SPDX-License-Identifier: GPL-2.0+ > +# > +# Copyright (C) 2020 Aditya Prayoga <aditya@kobol.io> > + > +obj-y := helios64.o sys_otp.o > diff --git a/board/kobol/helios64/helios64.c b/board/kobol/helios64/helios64.c > new file mode 100644 > index 0000000000..86349339fb > --- /dev/null > +++ b/board/kobol/helios64/helios64.c > @@ -0,0 +1,304 @@ > +// SPDX-License-Identifier: GPL-2.0+ > +/* > + * (C) Copyright 2020 Aditya Prayoga <aditya@kobol.io> > + */ > + > +#include <common.h> > +#include <dm.h> > +#include <env.h> > +#include <log.h> > +#include <led.h> > +#include <pci.h> > +#include <power/regulator.h> > +#include <scsi.h> > +#include <spl_gpio.h> > +#include <syscon.h> > +#include <usb.h> > +#include <linux/delay.h> > +#include <asm/io.h> > +#include <asm/gpio.h> > +#include <asm/arch-rockchip/clock.h> > +#include <asm/arch-rockchip/gpio.h> > +#include <asm/arch-rockchip/grf_rk3399.h> > +#include <asm/arch-rockchip/hardware.h> > +#include <asm/arch-rockchip/misc.h> > +#include <asm/arch-rockchip/periph.h> > + > +#include "sys_otp.h" > + > +#ifndef CONFIG_TPL_BUILD > +int board_early_init_f(void) > +{ > +#ifdef CONFIG_SPL_BUILD > +#define GPIO0_BASE 0xff720000 > +#define GRF_BASE 0xff770000 > + struct rk3399_grf_regs * const grf = (void *)GRF_BASE; > + struct rockchip_gpio_regs * const gpio = (void *)GPIO0_BASE; > + > + /* Turn ON status LED. At this stage, FDT & DM is not initialized yet */ > + spl_gpio_output(gpio, GPIO(BANK_B, 4), 1); > +#endif > + return 0; > +} > +#endif > + > +#ifndef CONFIG_SPL_BUILD > +int board_early_init_r(void) > +{ > + read_otp_data(); > + return 0; > +} > +#endif > + > +#ifdef CONFIG_MISC_INIT_R > +#define GRF_IO_VSEL_BT565_SHIFT 0 > +#define GRF_IO_VSEL_AUDIO_SHIFT 1 > +#define GRF_IO_VSEL_SDMMC_SHIFT 2 > +#define GRF_IO_VSEL_GPIO1830_SHIFT 3 > + > +#define PMUGRF_CON0_VSEL_SHIFT 8 > +#define PMUGRF_CON0_PMU1830_VOL_SHIFT 9 > +static void setup_iodomain(void) > +{ > + struct rk3399_grf_regs *grf = > + syscon_get_first_range(ROCKCHIP_SYSCON_GRF); > + struct rk3399_pmugrf_regs *pmugrf = > + syscon_get_first_range(ROCKCHIP_SYSCON_PMUGRF); > + > + /* BT565 is in 1.8v domain */ > + rk_setreg(&grf->io_vsel, 1 << GRF_IO_VSEL_BT565_SHIFT); > + > + /* AUDIO is in 1.8v domain */ > + rk_setreg(&grf->io_vsel, 1 << GRF_IO_VSEL_AUDIO_SHIFT); > + > + /* SDMMC is in 3.0v domain */ > + rk_setreg(&grf->io_vsel, 0 << GRF_IO_VSEL_SDMMC_SHIFT); > + > + /* GPIO1830 is in 3.0v domain */ > + rk_setreg(&grf->io_vsel, 0 << GRF_IO_VSEL_GPIO1830_SHIFT); > + > + /* Set GPIO1 1.8v/3.0v source select to PMU1830_VOL */ > + rk_setreg(&pmugrf->soc_con0, 1 << PMUGRF_CON0_VSEL_SHIFT); > + rk_setreg(&pmugrf->soc_con0, 0 << PMUGRF_CON0_PMU1830_VOL_SHIFT); > +} > + > +/* > + * Swap mmc0 and mmc1 in boot_targets if booted from SD-Card. > + * > + * If bootsource is uSD-card we can assume that we want to use the > + * SD-Card instead of the eMMC as first boot_target for distroboot. > + * We only want to swap the defaults and not any custom environment a > + * user has set. We exit early if a changed boot_targets environment > + * is detected. > + */ > +static int setup_boottargets(void) > +{ > + const char *boot_device = > + ofnode_read_chosen_string("u-boot,spl-boot-device"); > + char *env_default, *env; > + > + if (!boot_device) { > + debug("%s: /chosen/u-boot,spl-boot-device not set\n", > + __func__); > + return -1; > + } > + debug("%s: booted from %s\n", __func__, boot_device); > + > + env_default = env_get_default("boot_targets"); > + env = env_get("boot_targets"); > + if (!env) { > + debug("%s: boot_targets does not exist\n", __func__); > + return -1; > + } > + debug("%s: boot_targets current: %s - default: %s\n", > + __func__, env, env_default); > + > + if (strcmp(env_default, env) != 0) { > + debug("%s: boot_targets not default, don't change it\n", > + __func__); > + return 0; > + } > + > + /* > + * Only run, if booting from mmc1 (i.e. /mmc@fe320000) and > + * only consider cases where the default boot-order first > + * tries to boot from mmc0 (eMMC) and then from mmc1 > + * (i.e. external SD). > + * > + * In other words: the SD card will be moved to earlier in the > + * order, if U-Boot was also loaded from the SD-card. > + */ > + if (!strcmp(boot_device, "/mmc@fe320000")) { > + char *mmc0, *mmc1; > + > + debug("%s: booted from SD-Card\n", __func__); > + mmc0 = strstr(env, "mmc0"); > + mmc1 = strstr(env, "mmc1"); > + > + if (!mmc0 || !mmc1) { > + debug("%s: only one mmc boot_target found\n", __func__); > + return -1; > + } > + > + /* > + * If mmc0 comes first in the boot order, we need to change > + * the strings to make mmc1 first. > + */ > + if (mmc0 < mmc1) { > + mmc0[3] = '1'; > + mmc1[3] = '0'; > + debug("%s: set boot_targets to: %s\n", __func__, env); > + env_set("boot_targets", env); > + } > + } > + > + return 0; > +} > + > +static void setup_leds(void) > +{ > + struct udevice *dev; > + > + led_get_by_label("helios64::status", &dev); > + led_set_state(dev, LEDST_OFF); > + mdelay(250); > + led_set_state(dev, LEDST_ON); > +} > + > +int misc_init_r(void) > +{ > + const u32 cpuid_offset = 0x7; > + const u32 cpuid_length = 0x10; > + u8 cpuid[cpuid_length]; > + int ret; > + > + setup_iodomain(); > + set_board_info(); > + > + ret = rockchip_cpuid_from_efuse(cpuid_offset, cpuid_length, cpuid); > + if (ret) > + return ret; > + > + ret = rockchip_cpuid_set(cpuid, cpuid_length); > + if (ret) > + return ret; > + > + if (mac_read_from_otp()) > + ret = rockchip_setup_macaddr(); > + > + setup_boottargets(); > + setup_leds(); > + > + return ret; > +} > +#endif > + > +#ifdef CONFIG_ROCKCHIP_ADVANCED_RECOVERY > +void rockchip_prepare_download_mode(void) > +{ > + struct gpio_desc *enable, *mux; > + > + if (gpio_hog_lookup_name("USB_MUX_OE#", &enable)) { > + debug("Fail to get USB_MUX_OE\n"); > + return; > + } > + > + if (gpio_hog_lookup_name("USB_MUX_HS", &mux)) { > + debug("Fail to get USB_MUX_HS\n"); > + return; > + } > + > + dm_gpio_set_value(enable, 0); > + mdelay(100); > + dm_gpio_set_value(mux, 1); > + mdelay(100); > + dm_gpio_set_value(enable, 1); > +} > +#endif > + > +#ifdef CONFIG_LAST_STAGE_INIT > +static void auto_power_enable(void) > +{ > + struct gpio_desc *enable, *clock; > + > + if (gpio_hog_lookup_name("AUTO_ON_EN_D", &enable)) { > + debug("Fail to get AUTO_ON_EN_D\n"); > + return; > + } > + > + if (gpio_hog_lookup_name("AUTO_ON_EN_CLK", &clock)) { > + debug("Fail to get AUTO_ON_EN_CLK\n"); > + return; > + } > + > + dm_gpio_set_value(enable, 1); > + dm_gpio_set_value(clock, 1); > + mdelay(10); > + dm_gpio_set_value(clock, 0); > +} > + > +static void sata_power_enable(void) > +{ > + struct udevice *rail_a, *rail_b; > + int ret; > + > + ret = regulator_get_by_platname("power_hdd_a", &rail_a); > + if (!ret) { > + ret = regulator_set_enable(rail_a, true); > + if (!ret) > + mdelay(10000); > + } > + > + ret = regulator_get_by_platname("power_hdd_b", &rail_b); > + if (!ret) > + ret = regulator_set_enable(rail_b, true); > + > +} > + > +int last_stage_init(void) > +{ > + auto_power_enable(); > + sata_power_enable(); > + > +#ifdef CONFIG_PCI > + scsi_scan(true); > +#endif > + > + return 0; > +} > +#endif > + > +#if defined(CONFIG_DISPLAY_BOARDINFO_LATE) > +int checkboard(void) > +{ > + int major, minor; > + > + printf("Revision: "); > + > + if (!get_revision(&major, &minor)) > + printf("%i.%i - %s\n", major, minor, get_variant()); > + else > + printf("UNKNOWN\n"); > + > + return 0; > +} > +#endif > + > +#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) > +int ft_board_setup(void *blob, struct bd_info *bd) > +{ > + char *env; > + > + env = env_get("board_rev"); > + if (env) > + fdt_setprop_string(blob, fdt_path_offset(blob, "/"), > + "kobol,board-rev", env); > + > + env = env_get("cpuid#"); > + if (env) > + fdt_setprop_string(blob, fdt_path_offset(blob, "/"), > + "kobol,cpu-id", env); > + > + return 0; > +} > +#endif > diff --git a/board/kobol/helios64/sys_otp.c b/board/kobol/helios64/sys_otp.c > new file mode 100644 > index 0000000000..8c20693c0e > --- /dev/null > +++ b/board/kobol/helios64/sys_otp.c > @@ -0,0 +1,250 @@ > +/* SPDX-License-Identifier: GPL-2.0+ */ > + > +#include <linux/types.h> > +#include <dm.h> > +#include <spi.h> > +#include <log.h> > +#include <net.h> > +#include <u-boot/crc.h> > + > +#include "sys_otp.h" > + > +#define OTP_DEVICE_BUS 0 > +#define OTP_DEVICE_CS 0 > +#define MAX_NUM_PORTS 2 > + > +enum board_variant { > + BOARD_VARIANT_INVALID = 0, > + BOARD_VARIANT_ENG_SAMPLE, > + BOARD_VARIANT_4G_PROD_NO_ECC, > + BOARD_VARIANT_MAX > +}; > + > +struct __attribute__ ((__packed__)) otp_data_t { > + u8 magic[8]; > + u8 part_num[16]; > + u8 variant; > + u8 revision; > + u8 serial_num[6]; > + u8 mfg_year[2]; > + u8 mfg_month; > + u8 mfg_day; > + u8 mac_addr[MAX_NUM_PORTS][6]; > + u8 reserved[204]; > + u32 checksum; > +} otp; > + > +static struct spi_slave *slave; > +static int has_been_read = 0; > +static int data_valid = 0; > + > +static inline int is_data_valid(void) > +{ > + return data_valid; > +} > + > +static inline int is_valid_header(void) > +{ > + if ((otp.magic[0] == 'H') || (otp.magic[1] == '6') || > + (otp.magic[2] == '4') || (otp.magic[3] == 'N') || > + (otp.magic[4] == 'P') || (otp.magic[5] == 'V') || > + (otp.magic[6] == '1') || (otp.magic[7] == 0)) > + > + return 1; > + > + return 0; > +} > + > +static int init_system_otp(int bus, int cs) > +{ > + int ret; > + char name[30], *str; > + struct udevice *dev; > + > + snprintf(name, sizeof(name), "generic_%d:%d", bus, cs); > + str = strdup(name); > + if (!str) > + return -ENOMEM; > + ret = spi_get_bus_and_cs(bus, cs, 25000000, CONFIG_DEFAULT_SPI_MODE, "spi_generic_drv", > + str, &dev, &slave); > + return ret; > +} > + > +#ifdef DEBUG > +/** > + * show_otp_data - display the contents of the OTP register > + */ > +static void show_otp_data(void) > +{ > + u32 i; > + u32 crc; > + > + const char* var_str[BOARD_VARIANT_MAX] = { > + "Invalid variant", > + "Engineering Sample", > + "Production - 4GB non ECC" > + }; > + > + printf("\n"); > + printf("Register dump: (%lu bytes)\n", sizeof(otp)); > + for (i = 0; i < sizeof(otp); i++) { > + if ((i % 16) == 0) > + printf("%02X: ", i); > + printf("%02X ", ((u8 *)&otp)[i]); > + if (((i % 16) == 15) || (i == sizeof(otp) - 1)) > + printf("\n"); > + } > + > + if (!is_valid_header()) > + return; > + > + printf("Part Number: %s\n", otp.part_num); > + printf("Variant: %s\n", var_str[otp.variant]); > + printf("Revision: %x.%x\n", (otp.revision & 0xf0) >> 4, otp.revision & 0x0f); > + printf("Serial Number: %012llx\n", *((uint64_t*) otp.serial_num) & > + 0xFFFFFFFFFFFF); > + printf("Manufacturing Date: %02X-%02X-%04X (DD-MM-YYYY)\n", otp.mfg_day, > + otp.mfg_month, *(u16*) otp.mfg_year); > + > + printf("1GbE MAC Address: %02X:%02X:%02X:%02X:%02X:%02X\n", > + otp.mac_addr[0][0], otp.mac_addr[0][1], otp.mac_addr[0][2], > + otp.mac_addr[0][3], otp.mac_addr[0][4], otp.mac_addr[0][5]); > + > + printf("2.5GbE MAC Address: %02X:%02X:%02X:%02X:%02X:%02X\n", > + otp.mac_addr[1][0], otp.mac_addr[1][1], otp.mac_addr[1][2], > + otp.mac_addr[1][3], otp.mac_addr[1][4], otp.mac_addr[1][5]); > + > + crc = crc32(0, (void *)&otp, sizeof(otp) - 4); > + > + if (crc == le32_to_cpu(otp.checksum)) > + printf("CRC: %08x\n\n", le32_to_cpu(otp.checksum)); > + else > + printf("CRC: %08x (should be %08x)\n\n", > + le32_to_cpu(otp.checksum), crc); > + > +} > +#endif > + > +int read_otp_data(void) > +{ > + int ret; > + u8 dout[5]; > + > + if (has_been_read) { > + if (is_data_valid()) > + return 0; > + else > + goto data_invalid; > + } > + > + ret = init_system_otp(OTP_DEVICE_BUS, OTP_DEVICE_CS); > + if (ret) > + return ret; > + > + ret = spi_claim_bus(slave); > + if (ret) { > + debug("SPI: Failed to claim SPI bus: %d\n", ret); > + return ret; > + } > + > + dout[0] = 0x48; > + dout[1] = 0x00; > + dout[2] = 0x10; /* Security Register #1 */ > + dout[3] = 0x00; > + dout[4] = 0x00; /* Dummy Byte */ > + > + ret = spi_write_then_read(slave, dout, sizeof(dout), NULL, (u8 *)&otp, > + sizeof(otp)); > + > + spi_release_bus(slave); > +#ifdef DEBUG > + show_otp_data(); > +#endif > + > + has_been_read = (ret == 0) ? 1 : 0; > + if (!is_valid_header()) > + goto data_invalid; > + > + if (crc32(0, (void *)&otp, sizeof(otp) - 4) == > + le32_to_cpu(otp.checksum)) > + data_valid = 1; > + > + if (!is_data_valid()) > + goto data_invalid; > + > + return 0; > + > +data_invalid: > + printf("Invalid board ID data!\n"); > + return -1; > +} > + > +int get_revision(int *major, int *minor) > +{ > + if (!is_data_valid()) > + return -1; > + > + *major = (otp.revision & 0xf0) >> 4; > + *minor = otp.revision & 0x0f; > + > + return 0; > +} > + > +const char *get_variant(void) > +{ > + const char* var_str[BOARD_VARIANT_MAX] = { > + "Unknown", > + "Engineering Sample", > + "4GB non ECC" > + }; > + > + if ((otp.variant < BOARD_VARIANT_ENG_SAMPLE) || > + (otp.variant >= BOARD_VARIANT_MAX)) > + return var_str[0]; > + > + return var_str[otp.variant]; > +} > + > +void set_board_info(void) > +{ > + char env_str[13]; > + > + if (!is_data_valid()) > + return; > + > + snprintf(env_str, sizeof(env_str), "%i.%i", (otp.revision & 0xf0) >> 4, otp.revision & 0x0f); > + env_set("board_rev", env_str); > + > + sprintf(env_str, "%012llx", *((uint64_t*) otp.serial_num) & > + 0xFFFFFFFFFFFF); > + > + env_set("serial#", env_str); > +} > + > +int mac_read_from_otp(void) > +{ > + unsigned int i; > + int ret; > + > + if (!is_data_valid()) > + return -1; > + > + for (i = 0; i < MAX_NUM_PORTS; i++) { > + char enetvar[9]; > + > + sprintf(enetvar, i ? "eth%daddr" : "ethaddr", i); > + > + if (!is_valid_ethaddr(otp.mac_addr[i])) { > + debug("Not valid %s!\n", enetvar); > + continue; > + } > + > + /* Only initialize environment variables that are blank > + * (i.e. have not yet been set) > + */ > + if (!env_get(enetvar)) > + eth_env_set_enetaddr(enetvar, otp.mac_addr[i]); > + } > + > + return ret; > +} > diff --git a/board/kobol/helios64/sys_otp.h b/board/kobol/helios64/sys_otp.h > new file mode 100644 > index 0000000000..48273d4a95 > --- /dev/null > +++ b/board/kobol/helios64/sys_otp.h > @@ -0,0 +1,12 @@ > +/* SPDX-License-Identifier: GPL-2.0+ */ > + > +#ifndef __HELIOS64_SYS_OTP_H > +#define __HELIOS64_SYS_OTP_H > + > +int read_otp_data(void); > +void set_board_info(void); > +int get_revision(int *major, int *minor); > +const char *get_variant(void); > +int mac_read_from_otp(void); > + > +#endif > diff --git a/configs/helios64-rk3399_defconfig b/configs/helios64-rk3399_defconfig > new file mode 100644 > index 0000000000..3b4ed62ab6 > --- /dev/null > +++ b/configs/helios64-rk3399_defconfig > @@ -0,0 +1,147 @@ > +CONFIG_ARM=y > +CONFIG_ARCH_ROCKCHIP=y > +CONFIG_SYS_TEXT_BASE=0x00200000 > +CONFIG_SPL_GPIO_SUPPORT=y > +CONFIG_ENV_OFFSET=0x3F8000 > +CONFIG_ROCKCHIP_RK3399=y > +CONFIG_ROCKCHIP_ADVANCED_RECOVERY=y > +CONFIG_ROCKCHIP_ADVANCED_RECOVERY_LED="helios64::status" > +# CONFIG_ROCKCHIP_ADVANCED_RECOVERY_ROCKUSB is not set > +CONFIG_TARGET_HELIOS64=y > +CONFIG_NR_DRAM_BANKS=1 > +CONFIG_DEBUG_UART_BASE=0xFF1A0000 > +CONFIG_DEBUG_UART_CLOCK=24000000 > +CONFIG_SPL_SPI_FLASH_SUPPORT=y > +CONFIG_SPL_SPI_SUPPORT=y > +CONFIG_DEBUG_UART=y > +CONFIG_AHCI=y > +# CONFIG_ANDROID_BOOT_IMAGE is not set > +CONFIG_OF_BOARD_SETUP=y > +CONFIG_USE_PREBOOT=y > +CONFIG_CONSOLE_MUX=y > +CONFIG_SYS_CONSOLE_ENV_OVERWRITE=y > +CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-kobol-helios64.dtb" > +CONFIG_MISC_INIT_R=y > +CONFIG_VERSION_VARIABLE=y > +# CONFIG_DISPLAY_BOARDINFO is not set > +CONFIG_DISPLAY_BOARDINFO_LATE=y > +CONFIG_BOARD_TYPES=y > +CONFIG_BOARD_EARLY_INIT_F=y > +CONFIG_BOARD_EARLY_INIT_R=y > +CONFIG_LAST_STAGE_INIT=y > +# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set > +CONFIG_SPL_STACK_R=y > +CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000 > +CONFIG_SPL_I2C_SUPPORT=y > +CONFIG_SPL_POWER_SUPPORT=y > +CONFIG_SPL_SPI_LOAD=y > +CONFIG_TPL=y > +CONFIG_CMD_CONFIG=y > +CONFIG_CMD_BOOTZ=y > +# CONFIG_BOOTM_PLAN9 is not set > +# CONFIG_BOOTM_RTEMS is not set > +# CONFIG_BOOTM_VXWORKS is not set > +CONFIG_CMD_BOOTEFI_HELLO=y > +CONFIG_CMD_BOOTMENU=y > +CONFIG_CRC32_VERIFY=y > +CONFIG_CMD_MD5SUM=y > +CONFIG_MD5SUM_VERIFY=y > +CONFIG_CMD_MEMINFO=y > +CONFIG_CMD_MX_CYCLIC=y > +CONFIG_CMD_SHA1SUM=y > +CONFIG_SHA1SUM_VERIFY=y > +CONFIG_CMD_STRINGS=y > +CONFIG_CMD_ADC=y > +CONFIG_CMD_GPIO=y > +CONFIG_CMD_GPT=y > +CONFIG_CMD_I2C=y > +CONFIG_CMD_MMC=y > +CONFIG_CMD_PCI=y > +CONFIG_CMD_POWEROFF=y > +CONFIG_CMD_READ=y > +CONFIG_CMD_SPI=y > +CONFIG_CMD_USB=y > +CONFIG_CMD_ROCKUSB=y > +CONFIG_CMD_USB_MASS_STORAGE=y > +CONFIG_CMD_EFIDEBUG=y > +CONFIG_CMD_EXCEPTION=y > +CONFIG_CMD_TIME=y > +CONFIG_CMD_PMIC=y > +CONFIG_CMD_REGULATOR=y > +CONFIG_CMD_FS_UUID=y > +CONFIG_PARTITION_TYPE_GUID=y > +CONFIG_SPL_OF_CONTROL=y > +CONFIG_OF_LIVE=y > +CONFIG_DEFAULT_DEVICE_TREE="rk3399-kobol-helios64" > +CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" > +CONFIG_ENV_IS_IN_MMC=y > +CONFIG_SYS_RELOC_GD_ENV_ADDR=y > +CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y > +CONFIG_IP_DEFRAG=y > +# CONFIG_DM_DEVICE_REMOVE is not set > +CONFIG_SCSI_AHCI=y > +CONFIG_AHCI_PCI=y > +CONFIG_SPL_FIRMWARE=y > +CONFIG_GPIO_HOG=y > +CONFIG_ROCKCHIP_GPIO=y > +CONFIG_DM_PCA953X=y > +CONFIG_I2C_SET_DEFAULT_BUS_NUM=y > +CONFIG_I2C_DEFAULT_BUS_NUMBER=0x8 > +CONFIG_SYS_I2C_ROCKCHIP=y > +CONFIG_LED=y > +CONFIG_LED_GPIO=y > +CONFIG_MISC=y > +CONFIG_ROCKCHIP_EFUSE=y > +CONFIG_ROCKCHIP_OTP=y > +CONFIG_MMC_DW=y > +CONFIG_MMC_DW_ROCKCHIP=y > +CONFIG_MMC_SDHCI=y > +CONFIG_MMC_SDHCI_ROCKCHIP=y > +CONFIG_SPI_FLASH_WINBOND=y > +CONFIG_PHY_REALTEK=y > +CONFIG_DM_ETH=y > +CONFIG_DM_MDIO=y > +CONFIG_PHY_GIGE=y > +CONFIG_ETH_DESIGNWARE=y > +CONFIG_RGMII=y > +CONFIG_MII=y > +CONFIG_GMAC_ROCKCHIP=y > +CONFIG_PCI=y > +CONFIG_PHY_ROCKCHIP_INNO_USB2=y > +CONFIG_PHY_ROCKCHIP_TYPEC=y > +CONFIG_DM_PMIC_FAN53555=y > +CONFIG_PMIC_RK8XX=y > +CONFIG_SPL_DM_REGULATOR=y > +CONFIG_REGULATOR_PWM=y > +CONFIG_SPL_DM_REGULATOR_FIXED=y > +CONFIG_DM_REGULATOR_GPIO=y > +CONFIG_SPL_DM_REGULATOR_GPIO=y > +CONFIG_REGULATOR_RK8XX=y > +CONFIG_PWM_ROCKCHIP=y > +CONFIG_RAM_RK3399_LPDDR4=y > +CONFIG_DM_RESET=y > +CONFIG_DM_RNG=y > +CONFIG_RNG_ROCKCHIP=y > +CONFIG_SCSI=y > +CONFIG_DM_SCSI=y > +CONFIG_BAUDRATE=1500000 > +CONFIG_DEBUG_UART_SHIFT=2 > +CONFIG_ROCKCHIP_SPI=y > +CONFIG_SYSRESET=y > +CONFIG_SYSRESET_SYSCON=y > +CONFIG_DM_THERMAL=y > +CONFIG_USB=y > +# CONFIG_SPL_DM_USB is not set > +CONFIG_USB_XHCI_HCD=y > +CONFIG_USB_XHCI_DWC3=y > +CONFIG_USB_EHCI_HCD=y > +CONFIG_USB_EHCI_GENERIC=y > +CONFIG_USB_DWC3=y > +CONFIG_USB_DWC3_GENERIC=y > +CONFIG_USB_GADGET=y > +CONFIG_USB_FUNCTION_ROCKUSB=y > +CONFIG_USB_HOST_ETHER=y > +CONFIG_USB_ETHER_RTL8152=y > +CONFIG_SPL_TINY_MEMSET=y > +CONFIG_ERRNO_STR=y > +CONFIG_HEXDUMP=y > diff --git a/include/configs/helios64.h b/include/configs/helios64.h > new file mode 100644 > index 0000000000..6fca9a6be0 > --- /dev/null > +++ b/include/configs/helios64.h > @@ -0,0 +1,47 @@ > +/* SPDX-License-Identifier: GPL-2.0+ */ > +/* > + * (C) Copyright 2020 Aditya Prayoga <aditya@kobol.io> > + */ > + > +#ifndef __HELIOS64_H > +#define __HELIOS64_H > + > +#include <configs/rk3399_common.h> > + > +#define SDRAM_BANK_SIZE (2UL << 30) > + > +#if defined(CONFIG_ENV_IS_IN_MMC) > + #define CONFIG_SYS_MMC_ENV_DEV 0 > +#elif defined(CONFIG_ENV_IS_IN_SPI_FLASH) > + #define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS > + #define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS > + #define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE > + #define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED > +#endif > + > + > +#ifndef CONFIG_SPL_BUILD > +#if CONFIG_IS_ENABLED(SCSI) > + > + #define CONFIG_SYS_SCSI_MAX_SCSI_ID 5 > + #define CONFIG_SYS_SCSI_MAX_LUN 1 > + #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ > + CONFIG_SYS_SCSI_MAX_LUN) > + > + #define BOOT_TARGET_SCSI(func) \ > + func(SCSI, scsi, 0) > +#else > + #define BOOT_TARGET_SCSI(func) > +#endif > + > +#undef BOOT_TARGET_DEVICES > +#define BOOT_TARGET_DEVICES(func) \ > + BOOT_TARGET_MMC(func) \ > + BOOT_TARGET_USB(func) \ > + BOOT_TARGET_SCSI(func) \ > + BOOT_TARGET_PXE(func) \ > + BOOT_TARGET_DHCP(func) > + > +#endif > + > +#endif
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 33e483f4fb..2c820bc2b7 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -124,6 +124,7 @@ dtb-$(CONFIG_ROCKCHIP_RK3399) += \ rk3399-ficus.dtb \ rk3399-firefly.dtb \ rk3399-gru-bob.dtb \ + rk3399-kobol-helios64.dtb \ rk3399-khadas-edge.dtb \ rk3399-khadas-edge-captain.dtb \ rk3399-khadas-edge-v.dtb \ diff --git a/arch/arm/dts/rk3399-kobol-helios64-u-boot.dtsi b/arch/arm/dts/rk3399-kobol-helios64-u-boot.dtsi new file mode 100644 index 0000000000..6fe9d59df3 --- /dev/null +++ b/arch/arm/dts/rk3399-kobol-helios64-u-boot.dtsi @@ -0,0 +1,136 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (c) 2020 Aditya Prayoga <aditya@kobol.io> + */ + +#include "rk3399-u-boot.dtsi" +#include "rk3399-sdram-lpddr4-100.dtsi" +/ { + aliases { + spi0 = &spi1; + spi1 = &spi2; + spi2 = &spi5; + ethernet0 = &gmac; + ethernet1 = &usb_lan; + }; + + chosen { + bootargs = "earlycon=uart8250,mmio32,0xff1a0000 earlyprintk"; + stdout-path = "serial2:1500000n8"; + u-boot,spl-boot-order = "same-as-spl", &spiflash, &sdmmc, &sdhci; + }; + + config { + u-boot,spl-payload-offset = <0x80000>; /* @ 512KB */ + }; +}; + +&gpio1 { + usb-mux-hs { + gpio-hog; + gpios = <RK_PA4 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "USB_MUX_HS"; + }; + + usb-mux-oe { + gpio-hog; + gpios = <RK_PB5 GPIO_ACTIVE_LOW>; + output-high; + line-name = "USB_MUX_OE#"; + }; + + soc-flash-wp { + gpio-hog; + gpios = <RK_PC2 GPIO_ACTIVE_LOW>; + output-low; + line-name = "SOC_WP#"; + }; +}; + +&gpio2 { + sata-flash-wp { + gpio-hog; + gpios = <RK_PD0 GPIO_ACTIVE_LOW>; + output-high; + line-name = "SATA_WP#_LV"; + }; +}; + +&gpio4 { + auto-on-en-d { + gpio-hog; + gpios = <RK_PD1 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "AUTO_ON_EN_D"; + }; + + auto-on-en-clk { + gpio-hog; + gpios = <RK_PD2 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "AUTO_ON_EN_CLK"; + }; + + board-rev-id-0 { + gpio-hog; + gpios = <RK_PD5 GPIO_ACTIVE_HIGH>; + input; + }; + + board-rev-id-1 { + gpio-hog; + gpios = <RK_PD6 GPIO_ACTIVE_HIGH>; + input; + }; +}; + +&int_hub { + compatible = "usb-hub"; + usb,device-class = <USB_CLASS_HUB>; +}; + +&pcie_prst { + rockchip,pins = + <2 RK_PD4 RK_FUNC_GPIO &pcfg_output_low>; +}; + +&pcie_pwr_en { + rockchip,pins = + <1 RK_PD0 RK_FUNC_GPIO &pcfg_output_low>; +}; + +&pinctrl { + usb { + usb_mux_hs: usb-mux-hs { + rockchip,pins = + <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + usb_mux_oe: usb-mux-oe { + rockchip,pins = + <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&spi1 { + spiflash: flash@0 { + compatible = "jedec,spi-nor"; + reg = <0x0>; + spi-max-frequency = <25000000>; + status = "okay"; + m25p,fast-read; + u-boot,dm-pre-reloc; + }; +}; + +&vdd_center { + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <950000>; + regulator-init-microvolt = <950000>; +}; + +&vdd_log { + regulator-init-microvolt = <900000>; +}; diff --git a/arch/arm/dts/rk3399-kobol-helios64.dts b/arch/arm/dts/rk3399-kobol-helios64.dts new file mode 100644 index 0000000000..66c725a342 --- /dev/null +++ b/arch/arm/dts/rk3399-kobol-helios64.dts @@ -0,0 +1,372 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2020 Aditya Prayoga <aditya@kobol.io> + */ + +/* + * The Kobol Helios64 is a board designed to operate as a NAS and optionally + * ships with an enclosing that can host five 2.5" hard disks. + * + * See https://wiki.kobol.io/helios64/intro/ for further details. + */ + +/dts-v1/; +#include "rk3399.dtsi" +#include "rk3399-opp.dtsi" + +/ { + model = "Kobol Helios64"; + compatible = "kobol,helios64", "rockchip,rk3399"; + + avdd_1v8_s0: avdd-1v8-s0 { + compatible = "regulator-fixed"; + regulator-name = "avdd_1v8_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc3v3_sys_s3>; + }; + + clkin_gmac: external-gmac-clock { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "clkin_gmac"; + #clock-cells = <0>; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&sys_grn_led_on &sys_red_led_on>; + + led-0 { + label = "helios64:green:status"; + gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + + led-1 { + label = "helios64:red:fault"; + gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + }; + }; + + vcc1v8_sys_s0: vcc1v8-sys-s0 { + compatible = "regulator-fixed"; + regulator-name = "vcc1v8_sys_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc1v8_sys_s3>; + }; + + vcc3v0_sd: vcc3v0-sd { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>; + regulator-name = "vcc3v0_sd"; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc0_pwr_h>; + vin-supply = <&vcc3v3_sys_s3>; + }; + + vcc3v3_sys_s3: vcc_lan: vcc3v3-sys-s3 { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_sys_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc5v0_sys: vcc5v0-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc12v_dcin_bkup>; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc12v_dcin: vcc12v-dcin { + compatible = "regulator-fixed"; + regulator-name = "vcc12v_dcin"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + vcc12v_dcin_bkup: vcc12v-dcin-bkup { + compatible = "regulator-fixed"; + regulator-name = "vcc12v_dcin_bkup"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + vin-supply = <&vcc12v_dcin>; + }; +}; + +/* + * The system doesn't run stable with cpu freq enabled, so disallow the lower + * frequencies until this problem is properly understood and resolved. + */ +&cluster0_opp { + /delete-node/ opp00; + /delete-node/ opp01; + /delete-node/ opp02; + /delete-node/ opp03; + /delete-node/ opp04; +}; + +&cluster1_opp { + /delete-node/ opp00; + /delete-node/ opp01; + /delete-node/ opp02; + /delete-node/ opp03; + /delete-node/ opp04; + /delete-node/ opp05; + /delete-node/ opp06; +}; + +&cpu_b0 { + cpu-supply = <&vdd_cpu_b>; +}; + +&cpu_b1 { + cpu-supply = <&vdd_cpu_b>; +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_l>; +}; + +&emmc_phy { + status = "okay"; +}; + +&gmac { + assigned-clock-parents = <&clkin_gmac>; + assigned-clocks = <&cru SCLK_RMII_SRC>; + clock_in_out = "input"; + phy-mode = "rgmii"; + phy-supply = <&vcc_lan>; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins &gphy_reset>; + rx_delay = <0x20>; + tx_delay = <0x28>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 50000>; + snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&i2c0 { + clock-frequency = <400000>; + i2c-scl-rising-time-ns = <168>; + i2c-scl-falling-time-ns = <4>; + status = "okay"; + + rk808: pmic@1b { + compatible = "rockchip,rk808"; + reg = <0x1b>; + interrupt-parent = <&gpio0>; + interrupts = <10 IRQ_TYPE_LEVEL_LOW>; + clock-output-names = "xin32k", "rk808-clkout2"; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l>; + vcc1-supply = <&vcc5v0_sys>; + vcc2-supply = <&vcc5v0_sys>; + vcc3-supply = <&vcc5v0_sys>; + vcc4-supply = <&vcc5v0_sys>; + vcc6-supply = <&vcc5v0_sys>; + vcc7-supply = <&vcc5v0_sys>; + vcc8-supply = <&vcc3v3_sys_s3>; + vcc9-supply = <&vcc5v0_sys>; + vcc10-supply = <&vcc5v0_sys>; + vcc11-supply = <&vcc5v0_sys>; + vcc12-supply = <&vcc3v3_sys_s3>; + vddio-supply = <&vcc3v0_s3>; + wakeup-source; + #clock-cells = <1>; + + regulators { + vdd_cpu_l: DCDC_REG2 { + regulator-name = "vdd_cpu_l"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc1v8_sys_s3: DCDC_REG4 { + regulator-name = "vcc1v8_sys_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc_sdio_s0: LDO_REG4 { + regulator-name = "vcc_sdio_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vcc3v0_s3: LDO_REG8 { + regulator-name = "vcc3v0_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + }; + }; + + vdd_cpu_b: regulator@40 { + compatible = "silergy,syr827"; + reg = <0x40>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu_b"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1500000>; + regulator-ramp-delay = <1000>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&i2c2 { + clock-frequency = <400000>; + i2c-scl-rising-time-ns = <160>; + i2c-scl-falling-time-ns = <30>; + status = "okay"; + + temp@4c { + compatible = "national,lm75"; + reg = <0x4c>; + }; +}; + +&io_domains { + audio-supply = <&vcc1v8_sys_s0>; + bt656-supply = <&vcc1v8_sys_s0>; + gpio1830-supply = <&vcc3v0_s3>; + sdmmc-supply = <&vcc_sdio_s0>; + status = "okay"; +}; + +&pinctrl { + gmac { + gphy_reset: gphy-reset { + rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_output_low>; + }; + }; + + leds { + sys_grn_led_on: sys-grn-led-on { + rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + sys_red_led_on: sys-red-led-on { + rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + vcc3v0-sd { + sdmmc0_pwr_h: sdmmc0-pwr-h { + rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; +}; + +&pmu_io_domains { + pmu1830-supply = <&vcc3v0_s3>; + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + mmc-hs200-1_8v; + non-removable; + vqmmc-supply = <&vcc1v8_sys_s0>; + status = "okay"; +}; + +&sdmmc { + bus-width = <4>; + cap-sd-highspeed; + cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>; + disable-wp; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; + vmmc-supply = <&vcc3v0_sd>; + vqmmc-supply = <&vcc_sdio_s0>; + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; diff --git a/arch/arm/mach-rockchip/rk3399/Kconfig b/arch/arm/mach-rockchip/rk3399/Kconfig index 17628f9171..7890bafe56 100644 --- a/arch/arm/mach-rockchip/rk3399/Kconfig +++ b/arch/arm/mach-rockchip/rk3399/Kconfig @@ -28,6 +28,22 @@ config TARGET_PINEBOOK_PRO_RK3399 with 4Gb RAM, onboard eMMC, USB-C, a USB3 and USB2 port, 1920*1080 screen and all the usual laptop features. +config TARGET_HELIOS64 + bool "Kobol Innovations Helios64" + select BOARD_LATE_INIT + help + Helios64 is a Network Attached Storage board based on Rockchip RK3399. + + Key features of the Helios64 include: + * on-board PCIe to 5 Ports SATA Controller JMB585 + * on-board USB 3.0 hub (3x USB 3.0 host) + * USB Type-C (Support DisplayPort Alt Mode) + * on-board 1 Gigabit Ethernet + * on-board 2.5 Gigabit Ethernet (Realtek RTL8156) + * on-board eMMC + * on-board LPDDR4 + * SPI, I2C, UART, GPIO + config TARGET_PUMA_RK3399 bool "Theobroma Systems RK3399-Q7 (Puma)" help @@ -153,6 +169,7 @@ endif # BOOTCOUNT_LIMIT source "board/firefly/roc-pc-rk3399/Kconfig" source "board/google/gru/Kconfig" +source "board/kobol/helios64/Kconfig" source "board/pine64/pinebook-pro-rk3399/Kconfig" source "board/pine64/rockpro64_rk3399/Kconfig" source "board/rockchip/evb_rk3399/Kconfig" diff --git a/board/kobol/helios64/Kconfig b/board/kobol/helios64/Kconfig new file mode 100644 index 0000000000..644cdbd8f3 --- /dev/null +++ b/board/kobol/helios64/Kconfig @@ -0,0 +1,24 @@ +if TARGET_HELIOS64 + +config SYS_BOARD + default "helios64" + +config SYS_VENDOR + default "kobol" + +config SYS_CONFIG_NAME + default "helios64" + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + +config ENV_SECT_SIZE + default 0x1000 if ENV_IS_IN_SPI_FLASH + +config ENV_SIZE + default 0x8000 + +config ENV_OFFSET + default 0x460000 if ENV_IS_IN_SPI_FLASH + +endif diff --git a/board/kobol/helios64/MAINTAINERS b/board/kobol/helios64/MAINTAINERS new file mode 100644 index 0000000000..646644d485 --- /dev/null +++ b/board/kobol/helios64/MAINTAINERS @@ -0,0 +1,6 @@ +HELIOS64 BOARD +M: Christian Glombek <lorbus@fedoraproject.org> +S: Maintained +F: board/kobol/helios64/ +F: include/configs/helios64.h +F: configs/helios64_defconfig diff --git a/board/kobol/helios64/Makefile b/board/kobol/helios64/Makefile new file mode 100644 index 0000000000..ab34245a6d --- /dev/null +++ b/board/kobol/helios64/Makefile @@ -0,0 +1,5 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# Copyright (C) 2020 Aditya Prayoga <aditya@kobol.io> + +obj-y := helios64.o sys_otp.o diff --git a/board/kobol/helios64/helios64.c b/board/kobol/helios64/helios64.c new file mode 100644 index 0000000000..86349339fb --- /dev/null +++ b/board/kobol/helios64/helios64.c @@ -0,0 +1,304 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * (C) Copyright 2020 Aditya Prayoga <aditya@kobol.io> + */ + +#include <common.h> +#include <dm.h> +#include <env.h> +#include <log.h> +#include <led.h> +#include <pci.h> +#include <power/regulator.h> +#include <scsi.h> +#include <spl_gpio.h> +#include <syscon.h> +#include <usb.h> +#include <linux/delay.h> +#include <asm/io.h> +#include <asm/gpio.h> +#include <asm/arch-rockchip/clock.h> +#include <asm/arch-rockchip/gpio.h> +#include <asm/arch-rockchip/grf_rk3399.h> +#include <asm/arch-rockchip/hardware.h> +#include <asm/arch-rockchip/misc.h> +#include <asm/arch-rockchip/periph.h> + +#include "sys_otp.h" + +#ifndef CONFIG_TPL_BUILD +int board_early_init_f(void) +{ +#ifdef CONFIG_SPL_BUILD +#define GPIO0_BASE 0xff720000 +#define GRF_BASE 0xff770000 + struct rk3399_grf_regs * const grf = (void *)GRF_BASE; + struct rockchip_gpio_regs * const gpio = (void *)GPIO0_BASE; + + /* Turn ON status LED. At this stage, FDT & DM is not initialized yet */ + spl_gpio_output(gpio, GPIO(BANK_B, 4), 1); +#endif + return 0; +} +#endif + +#ifndef CONFIG_SPL_BUILD +int board_early_init_r(void) +{ + read_otp_data(); + return 0; +} +#endif + +#ifdef CONFIG_MISC_INIT_R +#define GRF_IO_VSEL_BT565_SHIFT 0 +#define GRF_IO_VSEL_AUDIO_SHIFT 1 +#define GRF_IO_VSEL_SDMMC_SHIFT 2 +#define GRF_IO_VSEL_GPIO1830_SHIFT 3 + +#define PMUGRF_CON0_VSEL_SHIFT 8 +#define PMUGRF_CON0_PMU1830_VOL_SHIFT 9 +static void setup_iodomain(void) +{ + struct rk3399_grf_regs *grf = + syscon_get_first_range(ROCKCHIP_SYSCON_GRF); + struct rk3399_pmugrf_regs *pmugrf = + syscon_get_first_range(ROCKCHIP_SYSCON_PMUGRF); + + /* BT565 is in 1.8v domain */ + rk_setreg(&grf->io_vsel, 1 << GRF_IO_VSEL_BT565_SHIFT); + + /* AUDIO is in 1.8v domain */ + rk_setreg(&grf->io_vsel, 1 << GRF_IO_VSEL_AUDIO_SHIFT); + + /* SDMMC is in 3.0v domain */ + rk_setreg(&grf->io_vsel, 0 << GRF_IO_VSEL_SDMMC_SHIFT); + + /* GPIO1830 is in 3.0v domain */ + rk_setreg(&grf->io_vsel, 0 << GRF_IO_VSEL_GPIO1830_SHIFT); + + /* Set GPIO1 1.8v/3.0v source select to PMU1830_VOL */ + rk_setreg(&pmugrf->soc_con0, 1 << PMUGRF_CON0_VSEL_SHIFT); + rk_setreg(&pmugrf->soc_con0, 0 << PMUGRF_CON0_PMU1830_VOL_SHIFT); +} + +/* + * Swap mmc0 and mmc1 in boot_targets if booted from SD-Card. + * + * If bootsource is uSD-card we can assume that we want to use the + * SD-Card instead of the eMMC as first boot_target for distroboot. + * We only want to swap the defaults and not any custom environment a + * user has set. We exit early if a changed boot_targets environment + * is detected. + */ +static int setup_boottargets(void) +{ + const char *boot_device = + ofnode_read_chosen_string("u-boot,spl-boot-device"); + char *env_default, *env; + + if (!boot_device) { + debug("%s: /chosen/u-boot,spl-boot-device not set\n", + __func__); + return -1; + } + debug("%s: booted from %s\n", __func__, boot_device); + + env_default = env_get_default("boot_targets"); + env = env_get("boot_targets"); + if (!env) { + debug("%s: boot_targets does not exist\n", __func__); + return -1; + } + debug("%s: boot_targets current: %s - default: %s\n", + __func__, env, env_default); + + if (strcmp(env_default, env) != 0) { + debug("%s: boot_targets not default, don't change it\n", + __func__); + return 0; + } + + /* + * Only run, if booting from mmc1 (i.e. /mmc@fe320000) and + * only consider cases where the default boot-order first + * tries to boot from mmc0 (eMMC) and then from mmc1 + * (i.e. external SD). + * + * In other words: the SD card will be moved to earlier in the + * order, if U-Boot was also loaded from the SD-card. + */ + if (!strcmp(boot_device, "/mmc@fe320000")) { + char *mmc0, *mmc1; + + debug("%s: booted from SD-Card\n", __func__); + mmc0 = strstr(env, "mmc0"); + mmc1 = strstr(env, "mmc1"); + + if (!mmc0 || !mmc1) { + debug("%s: only one mmc boot_target found\n", __func__); + return -1; + } + + /* + * If mmc0 comes first in the boot order, we need to change + * the strings to make mmc1 first. + */ + if (mmc0 < mmc1) { + mmc0[3] = '1'; + mmc1[3] = '0'; + debug("%s: set boot_targets to: %s\n", __func__, env); + env_set("boot_targets", env); + } + } + + return 0; +} + +static void setup_leds(void) +{ + struct udevice *dev; + + led_get_by_label("helios64::status", &dev); + led_set_state(dev, LEDST_OFF); + mdelay(250); + led_set_state(dev, LEDST_ON); +} + +int misc_init_r(void) +{ + const u32 cpuid_offset = 0x7; + const u32 cpuid_length = 0x10; + u8 cpuid[cpuid_length]; + int ret; + + setup_iodomain(); + set_board_info(); + + ret = rockchip_cpuid_from_efuse(cpuid_offset, cpuid_length, cpuid); + if (ret) + return ret; + + ret = rockchip_cpuid_set(cpuid, cpuid_length); + if (ret) + return ret; + + if (mac_read_from_otp()) + ret = rockchip_setup_macaddr(); + + setup_boottargets(); + setup_leds(); + + return ret; +} +#endif + +#ifdef CONFIG_ROCKCHIP_ADVANCED_RECOVERY +void rockchip_prepare_download_mode(void) +{ + struct gpio_desc *enable, *mux; + + if (gpio_hog_lookup_name("USB_MUX_OE#", &enable)) { + debug("Fail to get USB_MUX_OE\n"); + return; + } + + if (gpio_hog_lookup_name("USB_MUX_HS", &mux)) { + debug("Fail to get USB_MUX_HS\n"); + return; + } + + dm_gpio_set_value(enable, 0); + mdelay(100); + dm_gpio_set_value(mux, 1); + mdelay(100); + dm_gpio_set_value(enable, 1); +} +#endif + +#ifdef CONFIG_LAST_STAGE_INIT +static void auto_power_enable(void) +{ + struct gpio_desc *enable, *clock; + + if (gpio_hog_lookup_name("AUTO_ON_EN_D", &enable)) { + debug("Fail to get AUTO_ON_EN_D\n"); + return; + } + + if (gpio_hog_lookup_name("AUTO_ON_EN_CLK", &clock)) { + debug("Fail to get AUTO_ON_EN_CLK\n"); + return; + } + + dm_gpio_set_value(enable, 1); + dm_gpio_set_value(clock, 1); + mdelay(10); + dm_gpio_set_value(clock, 0); +} + +static void sata_power_enable(void) +{ + struct udevice *rail_a, *rail_b; + int ret; + + ret = regulator_get_by_platname("power_hdd_a", &rail_a); + if (!ret) { + ret = regulator_set_enable(rail_a, true); + if (!ret) + mdelay(10000); + } + + ret = regulator_get_by_platname("power_hdd_b", &rail_b); + if (!ret) + ret = regulator_set_enable(rail_b, true); + +} + +int last_stage_init(void) +{ + auto_power_enable(); + sata_power_enable(); + +#ifdef CONFIG_PCI + scsi_scan(true); +#endif + + return 0; +} +#endif + +#if defined(CONFIG_DISPLAY_BOARDINFO_LATE) +int checkboard(void) +{ + int major, minor; + + printf("Revision: "); + + if (!get_revision(&major, &minor)) + printf("%i.%i - %s\n", major, minor, get_variant()); + else + printf("UNKNOWN\n"); + + return 0; +} +#endif + +#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) +int ft_board_setup(void *blob, struct bd_info *bd) +{ + char *env; + + env = env_get("board_rev"); + if (env) + fdt_setprop_string(blob, fdt_path_offset(blob, "/"), + "kobol,board-rev", env); + + env = env_get("cpuid#"); + if (env) + fdt_setprop_string(blob, fdt_path_offset(blob, "/"), + "kobol,cpu-id", env); + + return 0; +} +#endif diff --git a/board/kobol/helios64/sys_otp.c b/board/kobol/helios64/sys_otp.c new file mode 100644 index 0000000000..8c20693c0e --- /dev/null +++ b/board/kobol/helios64/sys_otp.c @@ -0,0 +1,250 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ + +#include <linux/types.h> +#include <dm.h> +#include <spi.h> +#include <log.h> +#include <net.h> +#include <u-boot/crc.h> + +#include "sys_otp.h" + +#define OTP_DEVICE_BUS 0 +#define OTP_DEVICE_CS 0 +#define MAX_NUM_PORTS 2 + +enum board_variant { + BOARD_VARIANT_INVALID = 0, + BOARD_VARIANT_ENG_SAMPLE, + BOARD_VARIANT_4G_PROD_NO_ECC, + BOARD_VARIANT_MAX +}; + +struct __attribute__ ((__packed__)) otp_data_t { + u8 magic[8]; + u8 part_num[16]; + u8 variant; + u8 revision; + u8 serial_num[6]; + u8 mfg_year[2]; + u8 mfg_month; + u8 mfg_day; + u8 mac_addr[MAX_NUM_PORTS][6]; + u8 reserved[204]; + u32 checksum; +} otp; + +static struct spi_slave *slave; +static int has_been_read = 0; +static int data_valid = 0; + +static inline int is_data_valid(void) +{ + return data_valid; +} + +static inline int is_valid_header(void) +{ + if ((otp.magic[0] == 'H') || (otp.magic[1] == '6') || + (otp.magic[2] == '4') || (otp.magic[3] == 'N') || + (otp.magic[4] == 'P') || (otp.magic[5] == 'V') || + (otp.magic[6] == '1') || (otp.magic[7] == 0)) + + return 1; + + return 0; +} + +static int init_system_otp(int bus, int cs) +{ + int ret; + char name[30], *str; + struct udevice *dev; + + snprintf(name, sizeof(name), "generic_%d:%d", bus, cs); + str = strdup(name); + if (!str) + return -ENOMEM; + ret = spi_get_bus_and_cs(bus, cs, 25000000, CONFIG_DEFAULT_SPI_MODE, "spi_generic_drv", + str, &dev, &slave); + return ret; +} + +#ifdef DEBUG +/** + * show_otp_data - display the contents of the OTP register + */ +static void show_otp_data(void) +{ + u32 i; + u32 crc; + + const char* var_str[BOARD_VARIANT_MAX] = { + "Invalid variant", + "Engineering Sample", + "Production - 4GB non ECC" + }; + + printf("\n"); + printf("Register dump: (%lu bytes)\n", sizeof(otp)); + for (i = 0; i < sizeof(otp); i++) { + if ((i % 16) == 0) + printf("%02X: ", i); + printf("%02X ", ((u8 *)&otp)[i]); + if (((i % 16) == 15) || (i == sizeof(otp) - 1)) + printf("\n"); + } + + if (!is_valid_header()) + return; + + printf("Part Number: %s\n", otp.part_num); + printf("Variant: %s\n", var_str[otp.variant]); + printf("Revision: %x.%x\n", (otp.revision & 0xf0) >> 4, otp.revision & 0x0f); + printf("Serial Number: %012llx\n", *((uint64_t*) otp.serial_num) & + 0xFFFFFFFFFFFF); + printf("Manufacturing Date: %02X-%02X-%04X (DD-MM-YYYY)\n", otp.mfg_day, + otp.mfg_month, *(u16*) otp.mfg_year); + + printf("1GbE MAC Address: %02X:%02X:%02X:%02X:%02X:%02X\n", + otp.mac_addr[0][0], otp.mac_addr[0][1], otp.mac_addr[0][2], + otp.mac_addr[0][3], otp.mac_addr[0][4], otp.mac_addr[0][5]); + + printf("2.5GbE MAC Address: %02X:%02X:%02X:%02X:%02X:%02X\n", + otp.mac_addr[1][0], otp.mac_addr[1][1], otp.mac_addr[1][2], + otp.mac_addr[1][3], otp.mac_addr[1][4], otp.mac_addr[1][5]); + + crc = crc32(0, (void *)&otp, sizeof(otp) - 4); + + if (crc == le32_to_cpu(otp.checksum)) + printf("CRC: %08x\n\n", le32_to_cpu(otp.checksum)); + else + printf("CRC: %08x (should be %08x)\n\n", + le32_to_cpu(otp.checksum), crc); + +} +#endif + +int read_otp_data(void) +{ + int ret; + u8 dout[5]; + + if (has_been_read) { + if (is_data_valid()) + return 0; + else + goto data_invalid; + } + + ret = init_system_otp(OTP_DEVICE_BUS, OTP_DEVICE_CS); + if (ret) + return ret; + + ret = spi_claim_bus(slave); + if (ret) { + debug("SPI: Failed to claim SPI bus: %d\n", ret); + return ret; + } + + dout[0] = 0x48; + dout[1] = 0x00; + dout[2] = 0x10; /* Security Register #1 */ + dout[3] = 0x00; + dout[4] = 0x00; /* Dummy Byte */ + + ret = spi_write_then_read(slave, dout, sizeof(dout), NULL, (u8 *)&otp, + sizeof(otp)); + + spi_release_bus(slave); +#ifdef DEBUG + show_otp_data(); +#endif + + has_been_read = (ret == 0) ? 1 : 0; + if (!is_valid_header()) + goto data_invalid; + + if (crc32(0, (void *)&otp, sizeof(otp) - 4) == + le32_to_cpu(otp.checksum)) + data_valid = 1; + + if (!is_data_valid()) + goto data_invalid; + + return 0; + +data_invalid: + printf("Invalid board ID data!\n"); + return -1; +} + +int get_revision(int *major, int *minor) +{ + if (!is_data_valid()) + return -1; + + *major = (otp.revision & 0xf0) >> 4; + *minor = otp.revision & 0x0f; + + return 0; +} + +const char *get_variant(void) +{ + const char* var_str[BOARD_VARIANT_MAX] = { + "Unknown", + "Engineering Sample", + "4GB non ECC" + }; + + if ((otp.variant < BOARD_VARIANT_ENG_SAMPLE) || + (otp.variant >= BOARD_VARIANT_MAX)) + return var_str[0]; + + return var_str[otp.variant]; +} + +void set_board_info(void) +{ + char env_str[13]; + + if (!is_data_valid()) + return; + + snprintf(env_str, sizeof(env_str), "%i.%i", (otp.revision & 0xf0) >> 4, otp.revision & 0x0f); + env_set("board_rev", env_str); + + sprintf(env_str, "%012llx", *((uint64_t*) otp.serial_num) & + 0xFFFFFFFFFFFF); + + env_set("serial#", env_str); +} + +int mac_read_from_otp(void) +{ + unsigned int i; + int ret; + + if (!is_data_valid()) + return -1; + + for (i = 0; i < MAX_NUM_PORTS; i++) { + char enetvar[9]; + + sprintf(enetvar, i ? "eth%daddr" : "ethaddr", i); + + if (!is_valid_ethaddr(otp.mac_addr[i])) { + debug("Not valid %s!\n", enetvar); + continue; + } + + /* Only initialize environment variables that are blank + * (i.e. have not yet been set) + */ + if (!env_get(enetvar)) + eth_env_set_enetaddr(enetvar, otp.mac_addr[i]); + } + + return ret; +} diff --git a/board/kobol/helios64/sys_otp.h b/board/kobol/helios64/sys_otp.h new file mode 100644 index 0000000000..48273d4a95 --- /dev/null +++ b/board/kobol/helios64/sys_otp.h @@ -0,0 +1,12 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ + +#ifndef __HELIOS64_SYS_OTP_H +#define __HELIOS64_SYS_OTP_H + +int read_otp_data(void); +void set_board_info(void); +int get_revision(int *major, int *minor); +const char *get_variant(void); +int mac_read_from_otp(void); + +#endif diff --git a/configs/helios64-rk3399_defconfig b/configs/helios64-rk3399_defconfig new file mode 100644 index 0000000000..3b4ed62ab6 --- /dev/null +++ b/configs/helios64-rk3399_defconfig @@ -0,0 +1,147 @@ +CONFIG_ARM=y +CONFIG_ARCH_ROCKCHIP=y +CONFIG_SYS_TEXT_BASE=0x00200000 +CONFIG_SPL_GPIO_SUPPORT=y +CONFIG_ENV_OFFSET=0x3F8000 +CONFIG_ROCKCHIP_RK3399=y +CONFIG_ROCKCHIP_ADVANCED_RECOVERY=y +CONFIG_ROCKCHIP_ADVANCED_RECOVERY_LED="helios64::status" +# CONFIG_ROCKCHIP_ADVANCED_RECOVERY_ROCKUSB is not set +CONFIG_TARGET_HELIOS64=y +CONFIG_NR_DRAM_BANKS=1 +CONFIG_DEBUG_UART_BASE=0xFF1A0000 +CONFIG_DEBUG_UART_CLOCK=24000000 +CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y +CONFIG_DEBUG_UART=y +CONFIG_AHCI=y +# CONFIG_ANDROID_BOOT_IMAGE is not set +CONFIG_OF_BOARD_SETUP=y +CONFIG_USE_PREBOOT=y +CONFIG_CONSOLE_MUX=y +CONFIG_SYS_CONSOLE_ENV_OVERWRITE=y +CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-kobol-helios64.dtb" +CONFIG_MISC_INIT_R=y +CONFIG_VERSION_VARIABLE=y +# CONFIG_DISPLAY_BOARDINFO is not set +CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_BOARD_TYPES=y +CONFIG_BOARD_EARLY_INIT_F=y +CONFIG_BOARD_EARLY_INIT_R=y +CONFIG_LAST_STAGE_INIT=y +# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set +CONFIG_SPL_STACK_R=y +CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000 +CONFIG_SPL_I2C_SUPPORT=y +CONFIG_SPL_POWER_SUPPORT=y +CONFIG_SPL_SPI_LOAD=y +CONFIG_TPL=y +CONFIG_CMD_CONFIG=y +CONFIG_CMD_BOOTZ=y +# CONFIG_BOOTM_PLAN9 is not set +# CONFIG_BOOTM_RTEMS is not set +# CONFIG_BOOTM_VXWORKS is not set +CONFIG_CMD_BOOTEFI_HELLO=y +CONFIG_CMD_BOOTMENU=y +CONFIG_CRC32_VERIFY=y +CONFIG_CMD_MD5SUM=y +CONFIG_MD5SUM_VERIFY=y +CONFIG_CMD_MEMINFO=y +CONFIG_CMD_MX_CYCLIC=y +CONFIG_CMD_SHA1SUM=y +CONFIG_SHA1SUM_VERIFY=y +CONFIG_CMD_STRINGS=y +CONFIG_CMD_ADC=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_PCI=y +CONFIG_CMD_POWEROFF=y +CONFIG_CMD_READ=y +CONFIG_CMD_SPI=y +CONFIG_CMD_USB=y +CONFIG_CMD_ROCKUSB=y +CONFIG_CMD_USB_MASS_STORAGE=y +CONFIG_CMD_EFIDEBUG=y +CONFIG_CMD_EXCEPTION=y +CONFIG_CMD_TIME=y +CONFIG_CMD_PMIC=y +CONFIG_CMD_REGULATOR=y +CONFIG_CMD_FS_UUID=y +CONFIG_PARTITION_TYPE_GUID=y +CONFIG_SPL_OF_CONTROL=y +CONFIG_OF_LIVE=y +CONFIG_DEFAULT_DEVICE_TREE="rk3399-kobol-helios64" +CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" +CONFIG_ENV_IS_IN_MMC=y +CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y +CONFIG_IP_DEFRAG=y +# CONFIG_DM_DEVICE_REMOVE is not set +CONFIG_SCSI_AHCI=y +CONFIG_AHCI_PCI=y +CONFIG_SPL_FIRMWARE=y +CONFIG_GPIO_HOG=y +CONFIG_ROCKCHIP_GPIO=y +CONFIG_DM_PCA953X=y +CONFIG_I2C_SET_DEFAULT_BUS_NUM=y +CONFIG_I2C_DEFAULT_BUS_NUMBER=0x8 +CONFIG_SYS_I2C_ROCKCHIP=y +CONFIG_LED=y +CONFIG_LED_GPIO=y +CONFIG_MISC=y +CONFIG_ROCKCHIP_EFUSE=y +CONFIG_ROCKCHIP_OTP=y +CONFIG_MMC_DW=y +CONFIG_MMC_DW_ROCKCHIP=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_ROCKCHIP=y +CONFIG_SPI_FLASH_WINBOND=y +CONFIG_PHY_REALTEK=y +CONFIG_DM_ETH=y +CONFIG_DM_MDIO=y +CONFIG_PHY_GIGE=y +CONFIG_ETH_DESIGNWARE=y +CONFIG_RGMII=y +CONFIG_MII=y +CONFIG_GMAC_ROCKCHIP=y +CONFIG_PCI=y +CONFIG_PHY_ROCKCHIP_INNO_USB2=y +CONFIG_PHY_ROCKCHIP_TYPEC=y +CONFIG_DM_PMIC_FAN53555=y +CONFIG_PMIC_RK8XX=y +CONFIG_SPL_DM_REGULATOR=y +CONFIG_REGULATOR_PWM=y +CONFIG_SPL_DM_REGULATOR_FIXED=y +CONFIG_DM_REGULATOR_GPIO=y +CONFIG_SPL_DM_REGULATOR_GPIO=y +CONFIG_REGULATOR_RK8XX=y +CONFIG_PWM_ROCKCHIP=y +CONFIG_RAM_RK3399_LPDDR4=y +CONFIG_DM_RESET=y +CONFIG_DM_RNG=y +CONFIG_RNG_ROCKCHIP=y +CONFIG_SCSI=y +CONFIG_DM_SCSI=y +CONFIG_BAUDRATE=1500000 +CONFIG_DEBUG_UART_SHIFT=2 +CONFIG_ROCKCHIP_SPI=y +CONFIG_SYSRESET=y +CONFIG_SYSRESET_SYSCON=y +CONFIG_DM_THERMAL=y +CONFIG_USB=y +# CONFIG_SPL_DM_USB is not set +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_DWC3=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_GENERIC=y +CONFIG_USB_DWC3=y +CONFIG_USB_DWC3_GENERIC=y +CONFIG_USB_GADGET=y +CONFIG_USB_FUNCTION_ROCKUSB=y +CONFIG_USB_HOST_ETHER=y +CONFIG_USB_ETHER_RTL8152=y +CONFIG_SPL_TINY_MEMSET=y +CONFIG_ERRNO_STR=y +CONFIG_HEXDUMP=y diff --git a/include/configs/helios64.h b/include/configs/helios64.h new file mode 100644 index 0000000000..6fca9a6be0 --- /dev/null +++ b/include/configs/helios64.h @@ -0,0 +1,47 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * (C) Copyright 2020 Aditya Prayoga <aditya@kobol.io> + */ + +#ifndef __HELIOS64_H +#define __HELIOS64_H + +#include <configs/rk3399_common.h> + +#define SDRAM_BANK_SIZE (2UL << 30) + +#if defined(CONFIG_ENV_IS_IN_MMC) + #define CONFIG_SYS_MMC_ENV_DEV 0 +#elif defined(CONFIG_ENV_IS_IN_SPI_FLASH) + #define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS + #define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS + #define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE + #define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED +#endif + + +#ifndef CONFIG_SPL_BUILD +#if CONFIG_IS_ENABLED(SCSI) + + #define CONFIG_SYS_SCSI_MAX_SCSI_ID 5 + #define CONFIG_SYS_SCSI_MAX_LUN 1 + #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ + CONFIG_SYS_SCSI_MAX_LUN) + + #define BOOT_TARGET_SCSI(func) \ + func(SCSI, scsi, 0) +#else + #define BOOT_TARGET_SCSI(func) +#endif + +#undef BOOT_TARGET_DEVICES +#define BOOT_TARGET_DEVICES(func) \ + BOOT_TARGET_MMC(func) \ + BOOT_TARGET_USB(func) \ + BOOT_TARGET_SCSI(func) \ + BOOT_TARGET_PXE(func) \ + BOOT_TARGET_DHCP(func) + +#endif + +#endif