From patchwork Sun Feb 21 01:06:25 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Tom Rini X-Patchwork-Id: 1442735 X-Patchwork-Delegate: trini@ti.com Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=lists.denx.de (client-ip=2a01:238:438b:c500:173d:9f52:ddab:ee01; helo=phobos.denx.de; envelope-from=u-boot-bounces@lists.denx.de; receiver=) Received: from phobos.denx.de (phobos.denx.de [IPv6:2a01:238:438b:c500:173d:9f52:ddab:ee01]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature RSA-PSS (4096 bits)) (No client certificate requested) by ozlabs.org (Postfix) with ESMTPS id 4DjnWq00bhz9sSC for ; Sun, 21 Feb 2021 12:18:46 +1100 (AEDT) Received: from h2850616.stratoserver.net (localhost [IPv6:::1]) by phobos.denx.de (Postfix) with ESMTP id 96AE1828F4; Sun, 21 Feb 2021 02:11:07 +0100 (CET) Authentication-Results: phobos.denx.de; dmarc=none (p=none dis=none) header.from=konsulko.com Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=u-boot-bounces@lists.denx.de Received: by phobos.denx.de (Postfix, from userid 109) id 8B4F68288B; Sun, 21 Feb 2021 02:08:31 +0100 (CET) X-Spam-Checker-Version: SpamAssassin 3.4.2 (2018-09-13) on phobos.denx.de X-Spam-Level: X-Spam-Status: No, score=-1.9 required=5.0 tests=BAYES_00,RCVD_IN_MSPIKE_H2, SPF_HELO_NONE autolearn=ham autolearn_force=no version=3.4.2 Received: from mail-qt1-f172.google.com (mail-qt1-f172.google.com [209.85.160.172]) (using TLSv1.3 with cipher TLS_AES_128_GCM_SHA256 (128/128 bits)) (No client certificate requested) by phobos.denx.de (Postfix) with ESMTPS id 4989D827D3 for ; Sun, 21 Feb 2021 02:07:42 +0100 (CET) Authentication-Results: phobos.denx.de; dmarc=none (p=none dis=none) header.from=konsulko.com Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=tom.rini@gmail.com Received: by mail-qt1-f172.google.com with SMTP id w1so34692qto.2 for ; Sat, 20 Feb 2021 17:07:42 -0800 (PST) X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references; bh=+BRvGevaR8QVddLCLpMr6jUnRVCildhJ2+sz/+YLqXs=; b=Qza7x9njc/9jctUxc2S7XDdMpxdq47mb+mLDff9cKe1XFnS/oxBZpMKcVATqRfhJRz f690EJszVbd9TFXaGWZgSGFltCRW97tTzn1mPT2Us/Ka8K5PZ2hPROHUwqnUzIOMC4MT ts1+9Dgdn8vgc1yWTyjK7ulXY3HqYVmiHtf/Et+hZ+sKu+zUi+d/2WJybd5QyNmsE+yS +SyfupmTFuzpkfFYW7fBo5ThNenng3yEfwWgGboU3d93kylLy+K0YRnBXkBU5mPPXzSR Ua0t2iLPyK5anKypN56zP0jcU1ZqGqaYUP1MGkwtYSa9+dK2P9T1bmzOHVl3lsBojk8B INQw== X-Gm-Message-State: AOAM530ldG2wWnt3UbrVjRCrRwVrDjfZ4yUoYR9AYOiJnzQdnvo0ycAu PEf2BkxTY2AvqEOog++i8SO5bWsYLg== X-Google-Smtp-Source: ABdhPJxOLnh2+D+4kTmmwXnnlOufBhnxJEfNX8LCpQapmurcac1hcNpM3HbkPGqm8E1GeeJ/RfhMNg== X-Received: by 2002:a05:622a:193:: with SMTP id s19mr14936237qtw.366.1613869659472; Sat, 20 Feb 2021 17:07:39 -0800 (PST) Received: from bill-the-cat.lan (2603-6081-7b07-927a-9c68-72b3-3fc3-46af.res6.spectrum.com. [2603:6081:7b07:927a:9c68:72b3:3fc3:46af]) by smtp.gmail.com with ESMTPSA id p12sm8233241qtw.27.2021.02.20.17.07.38 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Sat, 20 Feb 2021 17:07:38 -0800 (PST) From: Tom Rini To: u-boot@lists.denx.de Cc: Mario Six , Dirk Eibach Subject: [PATCH 48/57] ppc: Remove controlcenterd boards Date: Sat, 20 Feb 2021 20:06:25 -0500 Message-Id: <20210221010634.21310-49-trini@konsulko.com> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20210221010634.21310-1-trini@konsulko.com> References: <20210221010634.21310-1-trini@konsulko.com> X-BeenThere: u-boot@lists.denx.de X-Mailman-Version: 2.1.34 Precedence: list List-Id: U-Boot discussion List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: u-boot-bounces@lists.denx.de Sender: "U-Boot" X-Virus-Scanned: clamav-milter 0.102.3 at phobos.denx.de X-Virus-Status: Clean These boards have not been converted to CONFIG_DM_MMC by the deadline. Remove them. Cc: Mario Six Cc: Dirk Eibach Signed-off-by: Tom Rini --- arch/powerpc/cpu/mpc85xx/Kconfig | 5 - board/gdsys/p1022/Kconfig | 22 - board/gdsys/p1022/MAINTAINERS | 9 - board/gdsys/p1022/Makefile | 10 - board/gdsys/p1022/controlcenterd-id.c | 1244 ----------------- board/gdsys/p1022/controlcenterd-id.h | 15 - board/gdsys/p1022/controlcenterd.c | 431 ------ board/gdsys/p1022/ddr.c | 68 - board/gdsys/p1022/diu.c | 85 -- board/gdsys/p1022/law.c | 16 - board/gdsys/p1022/sdhc_boot.c | 63 - board/gdsys/p1022/tlb.c | 73 - ...trolcenterd_36BIT_SDCARD_DEVELOP_defconfig | 69 - configs/controlcenterd_36BIT_SDCARD_defconfig | 69 - ...ntrolcenterd_TRAILBLAZER_DEVELOP_defconfig | 36 - configs/controlcenterd_TRAILBLAZER_defconfig | 36 - include/configs/controlcenterd.h | 352 ----- 17 files changed, 2603 deletions(-) delete mode 100644 board/gdsys/p1022/Kconfig delete mode 100644 board/gdsys/p1022/MAINTAINERS delete mode 100644 board/gdsys/p1022/Makefile delete mode 100644 board/gdsys/p1022/controlcenterd-id.c delete mode 100644 board/gdsys/p1022/controlcenterd-id.h delete mode 100644 board/gdsys/p1022/controlcenterd.c delete mode 100644 board/gdsys/p1022/ddr.c delete mode 100644 board/gdsys/p1022/diu.c delete mode 100644 board/gdsys/p1022/law.c delete mode 100644 board/gdsys/p1022/sdhc_boot.c delete mode 100644 board/gdsys/p1022/tlb.c delete mode 100644 configs/controlcenterd_36BIT_SDCARD_DEVELOP_defconfig delete mode 100644 configs/controlcenterd_36BIT_SDCARD_defconfig delete mode 100644 configs/controlcenterd_TRAILBLAZER_DEVELOP_defconfig delete mode 100644 configs/controlcenterd_TRAILBLAZER_defconfig delete mode 100644 include/configs/controlcenterd.h diff --git a/arch/powerpc/cpu/mpc85xx/Kconfig b/arch/powerpc/cpu/mpc85xx/Kconfig index 3a787919f306..77dae8f6ffab 100644 --- a/arch/powerpc/cpu/mpc85xx/Kconfig +++ b/arch/powerpc/cpu/mpc85xx/Kconfig @@ -209,10 +209,6 @@ config TARGET_T4240RDB imply CMD_SATA imply PANIC_HANG -config TARGET_CONTROLCENTERD - bool "Support controlcenterd" - select ARCH_P1022 - config TARGET_KMP204X bool "Support kmp204x" select VENDOR_KM @@ -1390,7 +1386,6 @@ source "board/freescale/t102xrdb/Kconfig" source "board/freescale/t208xqds/Kconfig" source "board/freescale/t208xrdb/Kconfig" source "board/freescale/t4rdb/Kconfig" -source "board/gdsys/p1022/Kconfig" source "board/keymile/Kconfig" source "board/sbc8548/Kconfig" source "board/socrates/Kconfig" diff --git a/board/gdsys/p1022/Kconfig b/board/gdsys/p1022/Kconfig deleted file mode 100644 index f5154271d157..000000000000 --- a/board/gdsys/p1022/Kconfig +++ /dev/null @@ -1,22 +0,0 @@ -config GDSYS_LEGACY_DRIVERS - bool - help - Enable the gdsys legacy drivers under board/gdsys/common. If this - option is not set, all relevant DM drivers must be configured for the - device in question. - -if TARGET_CONTROLCENTERD - -config SYS_BOARD - default "p1022" - -config SYS_VENDOR - default "gdsys" - -config SYS_CONFIG_NAME - default "controlcenterd" - -config GDSYS_LEGACY_DRIVERS - default y - -endif diff --git a/board/gdsys/p1022/MAINTAINERS b/board/gdsys/p1022/MAINTAINERS deleted file mode 100644 index 99f1200c0984..000000000000 --- a/board/gdsys/p1022/MAINTAINERS +++ /dev/null @@ -1,9 +0,0 @@ -P1022 BOARD -M: Dirk Eibach -S: Maintained -F: board/gdsys/p1022/ -F: include/configs/controlcenterd.h -F: configs/controlcenterd_36BIT_SDCARD_defconfig -F: configs/controlcenterd_36BIT_SDCARD_DEVELOP_defconfig -F: configs/controlcenterd_TRAILBLAZER_defconfig -F: configs/controlcenterd_TRAILBLAZER_DEVELOP_defconfig diff --git a/board/gdsys/p1022/Makefile b/board/gdsys/p1022/Makefile deleted file mode 100644 index 83a008d198f6..000000000000 --- a/board/gdsys/p1022/Makefile +++ /dev/null @@ -1,10 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# Copyright 2010 Freescale Semiconductor, Inc. - -obj-y += law.o -obj-y += ddr.o -obj-y += tlb.o -obj-y += sdhc_boot.o -obj-$(CONFIG_CONTROLCENTERD) += controlcenterd.o controlcenterd-id.o -obj-$(CONFIG_FSL_DIU_FB) += diu.o diff --git a/board/gdsys/p1022/controlcenterd-id.c b/board/gdsys/p1022/controlcenterd-id.c deleted file mode 100644 index 1b5aa9042f57..000000000000 --- a/board/gdsys/p1022/controlcenterd-id.c +++ /dev/null @@ -1,1244 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * (C) Copyright 2013 - * Reinhard Pfau, Guntermann & Drunck GmbH, reinhard.pfau@gdsys.cc - */ - -/* TODO: some more #ifdef's to avoid unneeded code for stage 1 / stage 2 */ - -#ifdef CCDM_ID_DEBUG -#define DEBUG -#endif - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#undef CCDM_FIRST_STAGE -#undef CCDM_SECOND_STAGE -#undef CCDM_AUTO_FIRST_STAGE - -#ifdef CONFIG_DEVELOP -#define CCDM_DEVELOP -#endif - -#ifdef CONFIG_TRAILBLAZER -#define CCDM_FIRST_STAGE -#undef CCDM_SECOND_STAGE -#else -#undef CCDM_FIRST_STAGE -#define CCDM_SECOND_STAGE -#endif - -#if defined(CCDM_DEVELOP) && defined(CCDM_SECOND_STAGE) && \ - !defined(CCCM_FIRST_STAGE) -#define CCDM_AUTO_FIRST_STAGE -#endif - -/* CCDM specific contants */ -enum { - /* NV indices */ - NV_COMMON_DATA_INDEX = 0x40000001, - /* magics for key blob chains */ - MAGIC_KEY_PROGRAM = 0x68726500, - MAGIC_HMAC = 0x68616300, - MAGIC_END_OF_CHAIN = 0x00000000, - /* sizes */ - NV_COMMON_DATA_MIN_SIZE = 3 * sizeof(uint64_t) + 2 * sizeof(uint16_t), -}; - -/* other constants */ -enum { - ESDHC_BOOT_IMAGE_SIG_OFS = 0x40, - ESDHC_BOOT_IMAGE_SIZE_OFS = 0x48, - ESDHC_BOOT_IMAGE_ADDR_OFS = 0x50, - ESDHC_BOOT_IMAGE_TARGET_OFS = 0x58, - ESDHC_BOOT_IMAGE_ENTRY_OFS = 0x60, -}; - -enum { - I2C_SOC_0 = 0, - I2C_SOC_1 = 1, -}; - -struct key_program { - uint32_t magic; - uint32_t code_crc; - uint32_t code_size; - uint8_t code[]; -}; - -struct h_reg { - bool valid; - uint8_t digest[20]; -}; - - -enum access_mode { - HREG_NONE = 0, - HREG_RD = 1, - HREG_WR = 2, - HREG_RDWR = 3, -}; - -/* register constants */ -enum { - FIX_HREG_DEVICE_ID_HASH = 0, - FIX_HREG_SELF_HASH = 1, - FIX_HREG_STAGE2_HASH = 2, - FIX_HREG_VENDOR = 3, - COUNT_FIX_HREGS -}; - - -/* hre opcodes */ -enum { - /* opcodes w/o data */ - HRE_NOP = 0x00, - HRE_SYNC = HRE_NOP, - HRE_CHECK0 = 0x01, - /* opcodes w/o data, w/ sync dst */ - /* opcodes w/ data */ - HRE_LOAD = 0x81, - /* opcodes w/data, w/sync dst */ - HRE_XOR = 0xC1, - HRE_AND = 0xC2, - HRE_OR = 0xC3, - HRE_EXTEND = 0xC4, - HRE_LOADKEY = 0xC5, -}; - -/* hre errors */ -enum { - HRE_E_OK = 0, - HRE_E_TPM_FAILURE, - HRE_E_INVALID_HREG, -}; - -static uint64_t device_id; -static uint64_t device_cl; -static uint64_t device_type; - -static uint32_t platform_key_handle; - -static void(*bl2_entry)(void); - -static struct h_reg pcr_hregs[24]; -static struct h_reg fix_hregs[COUNT_FIX_HREGS]; -static struct h_reg var_hregs[8]; -static uint32_t hre_tpm_err; -static int hre_err = HRE_E_OK; - -#define IS_PCR_HREG(spec) ((spec) & 0x20) -#define IS_FIX_HREG(spec) (((spec) & 0x38) == 0x08) -#define IS_VAR_HREG(spec) (((spec) & 0x38) == 0x10) -#define HREG_IDX(spec) ((spec) & (IS_PCR_HREG(spec) ? 0x1f : 0x7)) - -static int get_tpm(struct udevice **devp) -{ - int rc; - - rc = uclass_first_device_err(UCLASS_TPM, devp); - if (rc) { - printf("Could not find TPM (ret=%d)\n", rc); - return CMD_RET_FAILURE; - } - - return 0; -} - -static const uint8_t vendor[] = "Guntermann & Drunck"; - -/** - * @brief read a bunch of data from MMC into memory. - * - * @param mmc pointer to the mmc structure to use. - * @param src offset where the data starts on MMC/SD device (in bytes). - * @param dst pointer to the location where the read data should be stored. - * @param size number of bytes to read from the MMC/SD device. - * @return number of bytes read or -1 on error. - */ -static int ccdm_mmc_read(struct mmc *mmc, u64 src, u8 *dst, int size) -{ - int result = 0; - u32 blk_len, ofs; - ulong block_no, n, cnt; - u8 *tmp_buf = NULL; - - if (size <= 0) - goto end; - - blk_len = mmc->read_bl_len; - tmp_buf = malloc(blk_len); - if (!tmp_buf) - goto failure; - block_no = src / blk_len; - ofs = src % blk_len; - - if (ofs) { - n = mmc->block_dev.block_read(&mmc->block_dev, block_no++, 1, - tmp_buf); - if (!n) - goto failure; - result = min(size, (int)(blk_len - ofs)); - memcpy(dst, tmp_buf + ofs, result); - dst += result; - size -= result; - } - cnt = size / blk_len; - if (cnt) { - n = mmc->block_dev.block_read(&mmc->block_dev, block_no, cnt, - dst); - if (n != cnt) - goto failure; - size -= cnt * blk_len; - result += cnt * blk_len; - dst += cnt * blk_len; - block_no += cnt; - } - if (size) { - n = mmc->block_dev.block_read(&mmc->block_dev, block_no++, 1, - tmp_buf); - if (!n) - goto failure; - memcpy(dst, tmp_buf, size); - result += size; - } - goto end; -failure: - result = -1; -end: - if (tmp_buf) - free(tmp_buf); - return result; -} - -/** - * @brief returns a location where the 2nd stage bootloader can be(/ is) placed. - * - * @return pointer to the location for/of the 2nd stage bootloader - */ -static u8 *get_2nd_stage_bl_location(ulong target_addr) -{ - ulong addr; -#ifdef CCDM_SECOND_STAGE - addr = env_get_ulong("loadaddr", 16, CONFIG_LOADADDR); -#else - addr = target_addr; -#endif - return (u8 *)(addr); -} - - -#ifdef CCDM_SECOND_STAGE -/** - * @brief returns a location where the image can be(/ is) placed. - * - * @return pointer to the location for/of the image - */ -static u8 *get_image_location(void) -{ - ulong addr; - /* TODO use other area? */ - addr = env_get_ulong("loadaddr", 16, CONFIG_LOADADDR); - return (u8 *)(addr); -} -#endif - -/** - * @brief get the size of a given (TPM) NV area - * @param index NV index of the area to get size for - * @param size pointer to the size - * @return 0 on success, != 0 on error - */ -static int get_tpm_nv_size(struct udevice *tpm, uint32_t index, uint32_t *size) -{ - uint32_t err; - uint8_t info[72]; - uint8_t *ptr; - uint16_t v16; - - err = tpm_get_capability(tpm, TPM_CAP_NV_INDEX, index, - info, sizeof(info)); - if (err) { - printf("tpm_get_capability(CAP_NV_INDEX, %08x) failed: %u\n", - index, err); - return 1; - } - - /* skip tag and nvIndex */ - ptr = info + 6; - /* skip 2 pcr info fields */ - v16 = get_unaligned_be16(ptr); - ptr += 2 + v16 + 1 + 20; - v16 = get_unaligned_be16(ptr); - ptr += 2 + v16 + 1 + 20; - /* skip permission and flags */ - ptr += 6 + 3; - - *size = get_unaligned_be32(ptr); - return 0; -} - -/** - * @brief search for a key by usage auth and pub key hash. - * @param auth usage auth of the key to search for - * @param pubkey_digest (SHA1) hash of the pub key structure of the key - * @param[out] handle the handle of the key iff found - * @return 0 if key was found in TPM; != 0 if not. - */ -static int find_key(struct udevice *tpm, const uint8_t auth[20], - const uint8_t pubkey_digest[20], uint32_t *handle) -{ - uint16_t key_count; - uint32_t key_handles[10]; - uint8_t buf[288]; - uint8_t *ptr; - uint32_t err; - uint8_t digest[20]; - size_t buf_len; - unsigned int i; - - /* fetch list of already loaded keys in the TPM */ - err = tpm_get_capability(tpm, TPM_CAP_HANDLE, TPM_RT_KEY, buf, - sizeof(buf)); - if (err) - return -1; - key_count = get_unaligned_be16(buf); - ptr = buf + 2; - for (i = 0; i < key_count; ++i, ptr += 4) - key_handles[i] = get_unaligned_be32(ptr); - - /* now search a(/ the) key which we can access with the given auth */ - for (i = 0; i < key_count; ++i) { - buf_len = sizeof(buf); - err = tpm_get_pub_key_oiap(tpm, key_handles[i], auth, buf, - &buf_len); - if (err && err != TPM_AUTHFAIL) - return -1; - if (err) - continue; - sha1_csum(buf, buf_len, digest); - if (!memcmp(digest, pubkey_digest, 20)) { - *handle = key_handles[i]; - return 0; - } - } - return 1; -} - -/** - * @brief read CCDM common data from TPM NV - * @return 0 if CCDM common data was found and read, !=0 if something failed. - */ -static int read_common_data(struct udevice *tpm) -{ - uint32_t size; - uint32_t err; - uint8_t buf[256]; - sha1_context ctx; - - if (get_tpm_nv_size(tpm, NV_COMMON_DATA_INDEX, &size) || - size < NV_COMMON_DATA_MIN_SIZE) - return 1; - err = tpm_nv_read_value(tpm, NV_COMMON_DATA_INDEX, - buf, min(sizeof(buf), size)); - if (err) { - printf("tpm_nv_read_value() failed: %u\n", err); - return 1; - } - - device_id = get_unaligned_be64(buf); - device_cl = get_unaligned_be64(buf + 8); - device_type = get_unaligned_be64(buf + 16); - - sha1_starts(&ctx); - sha1_update(&ctx, buf, 24); - sha1_finish(&ctx, fix_hregs[FIX_HREG_DEVICE_ID_HASH].digest); - fix_hregs[FIX_HREG_DEVICE_ID_HASH].valid = true; - - platform_key_handle = get_unaligned_be32(buf + 24); - - return 0; -} - -/** - * @brief compute hash of bootloader itself. - * @param[out] dst hash register where the hash should be stored - * @return 0 on success, != 0 on failure. - * - * @note MUST be called at a time where the boot loader is accessible at the - * configured location (; so take care when code is reallocated). - */ -static int compute_self_hash(struct h_reg *dst) -{ - sha1_csum((const uint8_t *)CONFIG_SYS_MONITOR_BASE, - CONFIG_SYS_MONITOR_LEN, dst->digest); - dst->valid = true; - return 0; -} - -int ccdm_compute_self_hash(void) -{ - if (!fix_hregs[FIX_HREG_SELF_HASH].valid) - compute_self_hash(&fix_hregs[FIX_HREG_SELF_HASH]); - return 0; -} - -/** - * @brief compute the hash of the 2nd stage boot loader (on SD card) - * @param[out] dst hash register to store the computed hash - * @return 0 on success, != 0 on failure - * - * Determines the size and location of the 2nd stage boot loader on SD card, - * loads the 2nd stage boot loader and computes the (SHA1) hash value. - * Within the 1st stage boot loader, the 2nd stage boot loader is loaded at - * the desired memory location and the variable @a bl2_entry is set. - * - * @note This sets the variable @a bl2_entry to the entry point when the - * 2nd stage boot loader is loaded at its configured memory location. - */ -static int compute_second_stage_hash(struct h_reg *dst) -{ - int result = 0; - u32 code_len, code_offset, target_addr, exec_entry; - struct mmc *mmc; - u8 *load_addr = NULL; - u8 buf[128]; - - mmc = find_mmc_device(0); - if (!mmc) - goto failure; - mmc_init(mmc); - - if (ccdm_mmc_read(mmc, 0, buf, sizeof(buf)) < 0) - goto failure; - - code_offset = *(u32 *)(buf + ESDHC_BOOT_IMAGE_ADDR_OFS); - code_len = *(u32 *)(buf + ESDHC_BOOT_IMAGE_SIZE_OFS); - target_addr = *(u32 *)(buf + ESDHC_BOOT_IMAGE_TARGET_OFS); - exec_entry = *(u32 *)(buf + ESDHC_BOOT_IMAGE_ENTRY_OFS); - - load_addr = get_2nd_stage_bl_location(target_addr); - if (load_addr == (u8 *)target_addr) - bl2_entry = (void(*)(void))exec_entry; - - if (ccdm_mmc_read(mmc, code_offset, load_addr, code_len) < 0) - goto failure; - - sha1_csum(load_addr, code_len, dst->digest); - dst->valid = true; - - goto end; -failure: - result = 1; - bl2_entry = NULL; -end: - return result; -} - -/** - * @brief get pointer to hash register by specification - * @param spec specification of a hash register - * @return pointer to hash register or NULL if @a spec does not qualify a - * valid hash register; NULL else. - */ -static struct h_reg *get_hreg(uint8_t spec) -{ - uint8_t idx; - - idx = HREG_IDX(spec); - if (IS_FIX_HREG(spec)) { - if (idx < ARRAY_SIZE(fix_hregs)) - return fix_hregs + idx; - hre_err = HRE_E_INVALID_HREG; - } else if (IS_PCR_HREG(spec)) { - if (idx < ARRAY_SIZE(pcr_hregs)) - return pcr_hregs + idx; - hre_err = HRE_E_INVALID_HREG; - } else if (IS_VAR_HREG(spec)) { - if (idx < ARRAY_SIZE(var_hregs)) - return var_hregs + idx; - hre_err = HRE_E_INVALID_HREG; - } - return NULL; -} - -/** - * @brief get pointer of a hash register by specification and usage. - * @param spec specification of a hash register - * @param mode access mode (read or write or read/write) - * @return pointer to hash register if found and valid; NULL else. - * - * This func uses @a get_reg() to determine the hash register for a given spec. - * If a register is found it is validated according to the desired access mode. - * The value of automatic registers (PCR register and fixed registers) is - * loaded or computed on read access. - */ -static struct h_reg *access_hreg(struct udevice *tpm, uint8_t spec, - enum access_mode mode) -{ - struct h_reg *result; - - result = get_hreg(spec); - if (!result) - return NULL; - - if (mode & HREG_WR) { - if (IS_FIX_HREG(spec)) { - hre_err = HRE_E_INVALID_HREG; - return NULL; - } - } - if (mode & HREG_RD) { - if (!result->valid) { - if (IS_PCR_HREG(spec)) { - hre_tpm_err = tpm_pcr_read(tpm, HREG_IDX(spec), - result->digest, 20); - result->valid = (hre_tpm_err == TPM_SUCCESS); - } else if (IS_FIX_HREG(spec)) { - switch (HREG_IDX(spec)) { - case FIX_HREG_DEVICE_ID_HASH: - read_common_data(tpm); - break; - case FIX_HREG_SELF_HASH: - ccdm_compute_self_hash(); - break; - case FIX_HREG_STAGE2_HASH: - compute_second_stage_hash(result); - break; - case FIX_HREG_VENDOR: - memcpy(result->digest, vendor, 20); - result->valid = true; - break; - } - } else { - result->valid = true; - } - } - if (!result->valid) { - hre_err = HRE_E_INVALID_HREG; - return NULL; - } - } - - return result; -} - -static void *compute_and(void *_dst, const void *_src, size_t n) -{ - uint8_t *dst = _dst; - const uint8_t *src = _src; - size_t i; - - for (i = n; i-- > 0; ) - *dst++ &= *src++; - - return _dst; -} - -static void *compute_or(void *_dst, const void *_src, size_t n) -{ - uint8_t *dst = _dst; - const uint8_t *src = _src; - size_t i; - - for (i = n; i-- > 0; ) - *dst++ |= *src++; - - return _dst; -} - -static void *compute_xor(void *_dst, const void *_src, size_t n) -{ - uint8_t *dst = _dst; - const uint8_t *src = _src; - size_t i; - - for (i = n; i-- > 0; ) - *dst++ ^= *src++; - - return _dst; -} - -static void *compute_extend(void *_dst, const void *_src, size_t n) -{ - uint8_t digest[20]; - sha1_context ctx; - - sha1_starts(&ctx); - sha1_update(&ctx, _dst, n); - sha1_update(&ctx, _src, n); - sha1_finish(&ctx, digest); - memcpy(_dst, digest, min(n, sizeof(digest))); - - return _dst; -} - -static int hre_op_loadkey(struct udevice *tpm, struct h_reg *src_reg, - struct h_reg *dst_reg, const void *key, - size_t key_size) -{ - uint32_t parent_handle; - uint32_t key_handle; - - if (!src_reg || !dst_reg || !src_reg->valid || !dst_reg->valid) - return -1; - if (find_key(tpm, src_reg->digest, dst_reg->digest, &parent_handle)) - return -1; - hre_tpm_err = tpm_load_key2_oiap(tpm, parent_handle, key, key_size, - src_reg->digest, &key_handle); - if (hre_tpm_err) { - hre_err = HRE_E_TPM_FAILURE; - return -1; - } - /* TODO remember key handle somehow? */ - - return 0; -} - -/** - * @brief executes the next opcode on the hash register engine. - * @param[in,out] ip pointer to the opcode (instruction pointer) - * @param[in,out] code_size (remaining) size of the code - * @return new instruction pointer on success, NULL on error. - */ -static const uint8_t *hre_execute_op(struct udevice *tpm, const uint8_t **ip, - size_t *code_size) -{ - bool dst_modified = false; - uint32_t ins; - uint8_t opcode; - uint8_t src_spec; - uint8_t dst_spec; - uint16_t data_size; - struct h_reg *src_reg, *dst_reg; - uint8_t buf[20]; - const uint8_t *src_buf, *data; - uint8_t *ptr; - int i; - void * (*bin_func)(void *, const void *, size_t); - - if (*code_size < 4) - return NULL; - - ins = get_unaligned_be32(*ip); - opcode = **ip; - data = *ip + 4; - src_spec = (ins >> 18) & 0x3f; - dst_spec = (ins >> 12) & 0x3f; - data_size = (ins & 0x7ff); - - debug("HRE: ins=%08x (op=%02x, s=%02x, d=%02x, L=%d)\n", ins, - opcode, src_spec, dst_spec, data_size); - - if ((opcode & 0x80) && (data_size + 4) > *code_size) - return NULL; - - src_reg = access_hreg(tpm, src_spec, HREG_RD); - if (hre_err || hre_tpm_err) - return NULL; - dst_reg = access_hreg(tpm, dst_spec, - (opcode & 0x40) ? HREG_RDWR : HREG_WR); - if (hre_err || hre_tpm_err) - return NULL; - - switch (opcode) { - case HRE_NOP: - goto end; - case HRE_CHECK0: - if (src_reg) { - for (i = 0; i < 20; ++i) { - if (src_reg->digest[i]) - return NULL; - } - } - break; - case HRE_LOAD: - bin_func = memcpy; - goto do_bin_func; - case HRE_XOR: - bin_func = compute_xor; - goto do_bin_func; - case HRE_AND: - bin_func = compute_and; - goto do_bin_func; - case HRE_OR: - bin_func = compute_or; - goto do_bin_func; - case HRE_EXTEND: - bin_func = compute_extend; -do_bin_func: - if (!dst_reg) - return NULL; - if (src_reg) { - src_buf = src_reg->digest; - } else { - if (!data_size) { - memset(buf, 0, 20); - src_buf = buf; - } else if (data_size == 1) { - memset(buf, *data, 20); - src_buf = buf; - } else if (data_size >= 20) { - src_buf = data; - } else { - src_buf = buf; - for (ptr = (uint8_t *)src_buf, i = 20; i > 0; - i -= data_size, ptr += data_size) - memcpy(ptr, data, - min_t(size_t, i, data_size)); - } - } - bin_func(dst_reg->digest, src_buf, 20); - dst_reg->valid = true; - dst_modified = true; - break; - case HRE_LOADKEY: - if (hre_op_loadkey(tpm, src_reg, dst_reg, data, data_size)) - return NULL; - break; - default: - return NULL; - } - - if (dst_reg && dst_modified && IS_PCR_HREG(dst_spec)) { - hre_tpm_err = tpm_extend(tpm, HREG_IDX(dst_spec), - dst_reg->digest, dst_reg->digest); - if (hre_tpm_err) { - hre_err = HRE_E_TPM_FAILURE; - return NULL; - } - } -end: - *ip += 4; - *code_size -= 4; - if (opcode & 0x80) { - *ip += data_size; - *code_size -= data_size; - } - - return *ip; -} - -/** - * @brief runs a program on the hash register engine. - * @param code pointer to the (HRE) code. - * @param code_size size of the code (in bytes). - * @return 0 on success, != 0 on failure. - */ -static int hre_run_program(struct udevice *tpm, const uint8_t *code, - size_t code_size) -{ - size_t code_left; - const uint8_t *ip = code; - - code_left = code_size; - hre_tpm_err = 0; - hre_err = HRE_E_OK; - while (code_left > 0) - if (!hre_execute_op(tpm, &ip, &code_left)) - return -1; - - return hre_err; -} - -static int check_hmac(struct key_program *hmac, - const uint8_t *data, size_t data_size) -{ - uint8_t key[20], computed_hmac[20]; - uint32_t type; - - type = get_unaligned_be32(hmac->code); - if (type != 0) - return 1; - memset(key, 0, sizeof(key)); - compute_extend(key, pcr_hregs[1].digest, 20); - compute_extend(key, pcr_hregs[2].digest, 20); - compute_extend(key, pcr_hregs[3].digest, 20); - compute_extend(key, pcr_hregs[4].digest, 20); - - sha1_hmac(key, sizeof(key), data, data_size, computed_hmac); - - return memcmp(computed_hmac, hmac->code + 4, 20); -} - -static int verify_program(struct key_program *prg) -{ - uint32_t crc; - crc = crc32(0, prg->code, prg->code_size); - - if (crc != prg->code_crc) { - printf("HRC crc mismatch: %08x != %08x\n", - crc, prg->code_crc); - return 1; - } - return 0; -} - -#if defined(CCDM_FIRST_STAGE) || (defined CCDM_AUTO_FIRST_STAGE) -static struct key_program *load_sd_key_program(void) -{ - u32 code_len, code_offset; - struct mmc *mmc; - u8 buf[128]; - struct key_program *result = NULL, *hmac = NULL; - struct key_program header; - - mmc = find_mmc_device(0); - if (!mmc) - return NULL; - mmc_init(mmc); - - if (ccdm_mmc_read(mmc, 0, buf, sizeof(buf)) <= 0) - goto failure; - - code_offset = *(u32 *)(buf + ESDHC_BOOT_IMAGE_ADDR_OFS); - code_len = *(u32 *)(buf + ESDHC_BOOT_IMAGE_SIZE_OFS); - - code_offset += code_len; - /* TODO: the following needs to be the size of the 2nd stage env */ - code_offset += CONFIG_ENV_SIZE; - - if (ccdm_mmc_read(mmc, code_offset, buf, 4*3) < 0) - goto failure; - - header.magic = get_unaligned_be32(buf); - header.code_crc = get_unaligned_be32(buf + 4); - header.code_size = get_unaligned_be32(buf + 8); - - if (header.magic != MAGIC_KEY_PROGRAM) - goto failure; - - result = malloc(sizeof(struct key_program) + header.code_size); - if (!result) - goto failure; - *result = header; - - printf("load key program chunk from SD card (%u bytes) ", - header.code_size); - code_offset += 12; - if (ccdm_mmc_read(mmc, code_offset, result->code, header.code_size) - < 0) - goto failure; - code_offset += header.code_size; - puts("\n"); - - if (verify_program(result)) - goto failure; - - if (ccdm_mmc_read(mmc, code_offset, buf, 4*3) < 0) - goto failure; - - header.magic = get_unaligned_be32(buf); - header.code_crc = get_unaligned_be32(buf + 4); - header.code_size = get_unaligned_be32(buf + 8); - - if (header.magic == MAGIC_HMAC) { - puts("check integrity\n"); - hmac = malloc(sizeof(struct key_program) + header.code_size); - if (!hmac) - goto failure; - *hmac = header; - code_offset += 12; - if (ccdm_mmc_read(mmc, code_offset, hmac->code, - hmac->code_size) < 0) - goto failure; - if (verify_program(hmac)) - goto failure; - if (check_hmac(hmac, result->code, result->code_size)) { - puts("key program integrity could not be verified\n"); - goto failure; - } - puts("key program verified\n"); - } - - goto end; -failure: - if (result) - free(result); - result = NULL; -end: - if (hmac) - free(hmac); - - return result; -} -#endif - -#ifdef CCDM_SECOND_STAGE -/** - * @brief load a key program from file system. - * @param ifname interface of the file system - * @param dev_part_str device part of the file system - * @param fs_type tyep of the file system - * @param path path of the file to load. - * @return the loaded structure or NULL on failure. - */ -static struct key_program *load_key_chunk(const char *ifname, - const char *dev_part_str, int fs_type, - const char *path) -{ - struct key_program *result = NULL; - struct key_program header; - uint32_t crc; - uint8_t buf[12]; - loff_t i; - - if (fs_set_blk_dev(ifname, dev_part_str, fs_type)) - goto failure; - if (fs_read(path, (ulong)buf, 0, 12, &i) < 0) - goto failure; - if (i < 12) - goto failure; - header.magic = get_unaligned_be32(buf); - header.code_crc = get_unaligned_be32(buf + 4); - header.code_size = get_unaligned_be32(buf + 8); - - if (header.magic != MAGIC_HMAC && header.magic != MAGIC_KEY_PROGRAM) - goto failure; - - result = malloc(sizeof(struct key_program) + header.code_size); - if (!result) - goto failure; - if (fs_set_blk_dev(ifname, dev_part_str, fs_type)) - goto failure; - if (fs_read(path, (ulong)result, 0, - sizeof(struct key_program) + header.code_size, &i) < 0) - goto failure; - if (i <= 0) - goto failure; - *result = header; - - crc = crc32(0, result->code, result->code_size); - - if (crc != result->code_crc) { - printf("%s: HRC crc mismatch: %08x != %08x\n", - path, crc, result->code_crc); - goto failure; - } - goto end; -failure: - if (result) { - free(result); - result = NULL; - } -end: - return result; -} -#endif - -#if defined(CCDM_FIRST_STAGE) || (defined CCDM_AUTO_FIRST_STAGE) -static const uint8_t prg_stage1_prepare[] = { - 0x00, 0x20, 0x00, 0x00, /* opcode: SYNC f0 */ - 0x00, 0x24, 0x00, 0x00, /* opcode: SYNC f1 */ - 0x01, 0x80, 0x00, 0x00, /* opcode: CHECK0 PCR0 */ - 0x81, 0x22, 0x00, 0x00, /* opcode: LOAD PCR0, f0 */ - 0x01, 0x84, 0x00, 0x00, /* opcode: CHECK0 PCR1 */ - 0x81, 0x26, 0x10, 0x00, /* opcode: LOAD PCR1, f1 */ - 0x01, 0x88, 0x00, 0x00, /* opcode: CHECK0 PCR2 */ - 0x81, 0x2a, 0x20, 0x00, /* opcode: LOAD PCR2, f2 */ - 0x01, 0x8c, 0x00, 0x00, /* opcode: CHECK0 PCR3 */ - 0x81, 0x2e, 0x30, 0x00, /* opcode: LOAD PCR3, f3 */ -}; - -static int first_stage_actions(struct udevice *tpm) -{ - int result = 0; - struct key_program *sd_prg = NULL; - - puts("CCDM S1: start actions\n"); -#ifndef CCDM_SECOND_STAGE - if (tpm_continue_self_test(tpm)) - goto failure; -#else - tpm_continue_self_test(tpm); -#endif - mdelay(37); - - if (hre_run_program(tpm, prg_stage1_prepare, - sizeof(prg_stage1_prepare))) - goto failure; - - sd_prg = load_sd_key_program(); - if (sd_prg) { - if (hre_run_program(tpm, sd_prg->code, sd_prg->code_size)) - goto failure; - puts("SD code run successfully\n"); - } else { - puts("no key program found on SD\n"); - goto failure; - } - goto end; -failure: - result = 1; -end: - if (sd_prg) - free(sd_prg); - printf("CCDM S1: actions done (%d)\n", result); - return result; -} -#endif - -#ifdef CCDM_FIRST_STAGE -static int first_stage_init(void) -{ - struct udevice *tpm; - int ret; - - puts("CCDM S1\n"); - ret = get_tpm(&tpm); - if (ret || tpm_init(tpm) || tpm_startup(tpm, TPM_ST_CLEAR)) - return 1; - ret = first_stage_actions(tpm); -#ifndef CCDM_SECOND_STAGE - if (!ret) { - if (bl2_entry) - (*bl2_entry)(); - ret = 1; - } -#endif - return ret; -} -#endif - -#ifdef CCDM_SECOND_STAGE -static const uint8_t prg_stage2_prepare[] = { - 0x00, 0x80, 0x00, 0x00, /* opcode: SYNC PCR0 */ - 0x00, 0x84, 0x00, 0x00, /* opcode: SYNC PCR1 */ - 0x00, 0x88, 0x00, 0x00, /* opcode: SYNC PCR2 */ - 0x00, 0x8c, 0x00, 0x00, /* opcode: SYNC PCR3 */ - 0x00, 0x90, 0x00, 0x00, /* opcode: SYNC PCR4 */ -}; - -static const uint8_t prg_stage2_success[] = { - 0x81, 0x02, 0x40, 0x14, /* opcode: LOAD PCR4, #<20B data> */ - 0x48, 0xfd, 0x95, 0x17, 0xe7, 0x54, 0x6b, 0x68, /* data */ - 0x92, 0x31, 0x18, 0x05, 0xf8, 0x58, 0x58, 0x3c, /* data */ - 0xe4, 0xd2, 0x81, 0xe0, /* data */ -}; - -static const uint8_t prg_stage_fail[] = { - 0x81, 0x01, 0x00, 0x14, /* opcode: LOAD v0, #<20B data> */ - 0xc0, 0x32, 0xad, 0xc1, 0xff, 0x62, 0x9c, 0x9b, /* data */ - 0x66, 0xf2, 0x27, 0x49, 0xad, 0x66, 0x7e, 0x6b, /* data */ - 0xea, 0xdf, 0x14, 0x4b, /* data */ - 0x81, 0x42, 0x30, 0x00, /* opcode: LOAD PCR3, v0 */ - 0x81, 0x42, 0x40, 0x00, /* opcode: LOAD PCR4, v0 */ -}; - -static int second_stage_init(void) -{ - static const char mac_suffix[] = ".mac"; - bool did_first_stage_run = true; - int result = 0; - char *cptr, *mmcdev = NULL; - struct key_program *hmac_blob = NULL; - const char *image_path = "/ccdm.itb"; - char *mac_path = NULL; - ulong image_addr; - loff_t image_size; - struct udevice *tpm; - uint32_t err; - int ret; - - printf("CCDM S2\n"); - ret = get_tpm(&tpm); - if (ret || tpm_init(tpm)) - return 1; - err = tpm_startup(tpm, TPM_ST_CLEAR); - if (err != TPM_INVALID_POSTINIT) - did_first_stage_run = false; - -#ifdef CCDM_AUTO_FIRST_STAGE - if (!did_first_stage_run && first_stage_actions(tpm)) - goto failure; -#else - if (!did_first_stage_run) - goto failure; -#endif - - if (hre_run_program(tpm, prg_stage2_prepare, - sizeof(prg_stage2_prepare))) - goto failure; - - /* run "prepboot" from env to get "mmcdev" set */ - cptr = env_get("prepboot"); - if (cptr && !run_command(cptr, 0)) - mmcdev = env_get("mmcdev"); - if (!mmcdev) - goto failure; - - cptr = env_get("ramdiskimage"); - if (cptr) - image_path = cptr; - - mac_path = malloc(strlen(image_path) + strlen(mac_suffix) + 1); - if (mac_path == NULL) - goto failure; - strcpy(mac_path, image_path); - strcat(mac_path, mac_suffix); - - /* read image from mmcdev (ccdm.itb) */ - image_addr = (ulong)get_image_location(); - if (fs_set_blk_dev("mmc", mmcdev, FS_TYPE_EXT)) - goto failure; - if (fs_read(image_path, image_addr, 0, 0, &image_size) < 0) - goto failure; - if (image_size <= 0) - goto failure; - printf("CCDM image found on %s, %lld bytes\n", mmcdev, image_size); - - hmac_blob = load_key_chunk("mmc", mmcdev, FS_TYPE_EXT, mac_path); - if (!hmac_blob) { - puts("failed to load mac file\n"); - goto failure; - } - if (verify_program(hmac_blob)) { - puts("corrupted mac file\n"); - goto failure; - } - if (check_hmac(hmac_blob, (u8 *)image_addr, image_size)) { - puts("image integrity could not be verified\n"); - goto failure; - } - puts("CCDM image OK\n"); - - hre_run_program(tpm, prg_stage2_success, sizeof(prg_stage2_success)); - - goto end; -failure: - result = 1; - hre_run_program(tpm, prg_stage_fail, sizeof(prg_stage_fail)); -end: - if (hmac_blob) - free(hmac_blob); - if (mac_path) - free(mac_path); - - return result; -} -#endif - -int show_self_hash(void) -{ - struct h_reg *hash_ptr; -#ifdef CCDM_SECOND_STAGE - struct h_reg hash; - - hash_ptr = &hash; - if (compute_self_hash(hash_ptr)) - return 1; -#else - hash_ptr = &fix_hregs[FIX_HREG_SELF_HASH]; -#endif - puts("self hash: "); - if (hash_ptr && hash_ptr->valid) - print_buffer(0, hash_ptr->digest, 1, 20, 20); - else - puts("INVALID\n"); - - return 0; -} - -/** - * @brief let the system hang. - * - * Called on error. - * Will stop the boot process; display a message and signal the error condition - * by blinking the "status" and the "finder" LED of the controller board. - * - * @note the develop version runs the blink cycle 2 times and then returns. - * The release version never returns. - */ -static void ccdm_hang(void) -{ - static const u64 f0 = 0x0ba3bb8ba2e880; /* blink code "finder" LED */ - static const u64 s0 = 0x00f0f0f0f0f0f0; /* blink code "status" LED */ - u64 f, s; - int i; -#ifdef CCDM_DEVELOP - int j; -#endif - - I2C_SET_BUS(I2C_SOC_0); - pca9698_direction_output(0x22, 0, 0); /* Finder */ - pca9698_direction_output(0x22, 4, 0); /* Status */ - - puts("### ERROR ### Please RESET the board ###\n"); - bootstage_error(BOOTSTAGE_ID_NEED_RESET); -#ifdef CCDM_DEVELOP - puts("*** ERROR ******** THIS WOULD HANG ******** ERROR ***\n"); - puts("** but we continue since this is a DEVELOP version **\n"); - puts("*** ERROR ******** THIS WOULD HANG ******** ERROR ***\n"); - for (j = 2; j-- > 0;) { - putc('#'); -#else - for (;;) { -#endif - f = f0; - s = s0; - for (i = 54; i-- > 0;) { - pca9698_set_value(0x22, 0, !(f & 1)); - pca9698_set_value(0x22, 4, (s & 1)); - f >>= 1; - s >>= 1; - mdelay(120); - } - } - puts("\ncontinue...\n"); -} - -int startup_ccdm_id_module(void) -{ - int result = 0; - unsigned int orig_i2c_bus; - - orig_i2c_bus = i2c_get_bus_num(); - i2c_set_bus_num(I2C_SOC_1); - - /* goto end; */ - -#ifdef CCDM_DEVELOP - show_self_hash(); -#endif -#ifdef CCDM_FIRST_STAGE - result = first_stage_init(); - if (result) { - puts("1st stage init failed\n"); - goto failure; - } -#endif -#ifdef CCDM_SECOND_STAGE - result = second_stage_init(); - if (result) { - puts("2nd stage init failed\n"); - goto failure; - } -#endif - - goto end; -failure: - result = 1; -end: - i2c_set_bus_num(orig_i2c_bus); - if (result) - ccdm_hang(); - - return result; -} diff --git a/board/gdsys/p1022/controlcenterd-id.h b/board/gdsys/p1022/controlcenterd-id.h deleted file mode 100644 index 289a4b14b6f9..000000000000 --- a/board/gdsys/p1022/controlcenterd-id.h +++ /dev/null @@ -1,15 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * (C) Copyright 2013 - * Reinhard Pfau, Guntermann & Drunck GmbH, reinhard.pfau@gdsys.cc - */ - -#ifndef __CONTROLCENTER_ID_H -#define __CONTROLCENTER_ID_H - -int ccdm_compute_self_hash(void); -int startup_ccdm_id_module(void); - -int show_self_hash(void); - -#endif /* __CONTROLCENTER_ID_H */ diff --git a/board/gdsys/p1022/controlcenterd.c b/board/gdsys/p1022/controlcenterd.c deleted file mode 100644 index d31cba3d06ef..000000000000 --- a/board/gdsys/p1022/controlcenterd.c +++ /dev/null @@ -1,431 +0,0 @@ -/* - * (C) Copyright 2013 - * Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "../common/dp501.h" -#include "controlcenterd-id.h" - -enum { - HWVER_100 = 0, - HWVER_110 = 1, - HWVER_120 = 2, -}; - -struct ihs_fpga { - u32 reflection_low; /* 0x0000 */ - u32 versions; /* 0x0004 */ - u32 fpga_version; /* 0x0008 */ - u32 fpga_features; /* 0x000c */ - u32 reserved[4]; /* 0x0010 */ - u32 control; /* 0x0020 */ -}; - -#ifndef CONFIG_TRAILBLAZER -static struct pci_device_id hydra_supported[] = { - { 0x6d5e, 0xcdc0 }, - {} -}; - -static void hydra_initialize(void); -#endif - -int board_early_init_f(void) -{ - ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; - ccsr_gpio_t *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO3_ADDR); - - /* Reset eLBC_DIU and SPI_eLBC in case we are booting from SD */ - clrsetbits_be32(&gur->pmuxcr, 0x00600000, 0x80000000); - - /* Set pmuxcr to allow both i2c1 and i2c2 */ - setbits_be32(&gur->pmuxcr, 0x00001000); - - /* Set pmuxcr to enable GPIO 3_11-3_13 */ - setbits_be32(&gur->pmuxcr, 0x00000010); - - /* Set pmuxcr to enable GPIO 2_31,3_9+10 */ - setbits_be32(&gur->pmuxcr, 0x00000020); - - /* Set pmuxcr to enable GPIO 2_28-2_30 */ - setbits_be32(&gur->pmuxcr, 0x000000c0); - - /* Set pmuxcr to enable GPIO 3_20-3_22 */ - setbits_be32(&gur->pmuxcr2, 0x03000000); - - /* Set pmuxcr to enable IRQ0-2 */ - clrbits_be32(&gur->pmuxcr, 0x00000300); - - /* Set pmuxcr to disable IRQ3-11 */ - setbits_be32(&gur->pmuxcr, 0x000000F0); - - /* Read back the register to synchronize the write. */ - in_be32(&gur->pmuxcr); - - /* Set the pin muxing to enable ETSEC2. */ - clrbits_be32(&gur->pmuxcr2, 0x001F8000); - -#ifdef CONFIG_TRAILBLAZER - /* - * GPIO3_10 SPERRTRIGGER - */ - setbits_be32(&pgpio->gpdir, 0x00200000); - clrbits_be32(&pgpio->gpdat, 0x00200000); - udelay(100); - setbits_be32(&pgpio->gpdat, 0x00200000); - udelay(100); - clrbits_be32(&pgpio->gpdat, 0x00200000); -#endif - - /* - * GPIO3_11 CPU-TO-FPGA-RESET# - */ - setbits_be32(&pgpio->gpdir, 0x00100000); - clrbits_be32(&pgpio->gpdat, 0x00100000); - - /* - * GPIO3_21 CPU-STATUS-WATCHDOG-TRIGGER# - */ - setbits_be32(&pgpio->gpdir, 0x00000400); - - return 0; -} - -int checkboard(void) -{ - printf("Board: ControlCenter DIGITAL\n"); - - return 0; -} - -int misc_init_r(void) -{ - return 0; -} - -/* - * A list of PCI and SATA slots - */ -enum slot_id { - SLOT_PCIE1 = 1, - SLOT_PCIE2, - SLOT_PCIE3, - SLOT_PCIE4, - SLOT_PCIE5, - SLOT_SATA1, - SLOT_SATA2 -}; - -/* - * This array maps the slot identifiers to their names on the P1022DS board. - */ -static const char * const slot_names[] = { - [SLOT_PCIE1] = "Slot 1", - [SLOT_PCIE2] = "Slot 2", - [SLOT_PCIE3] = "Slot 3", - [SLOT_PCIE4] = "Slot 4", - [SLOT_PCIE5] = "Mini-PCIe", - [SLOT_SATA1] = "SATA 1", - [SLOT_SATA2] = "SATA 2", -}; - -/* - * This array maps a given SERDES configuration and SERDES device to the PCI or - * SATA slot that it connects to. This mapping is hard-coded in the FPGA. - */ -static u8 serdes_dev_slot[][SATA2 + 1] = { - [0x01] = { [PCIE3] = SLOT_PCIE4, [PCIE2] = SLOT_PCIE5 }, - [0x02] = { [SATA1] = SLOT_SATA1, [SATA2] = SLOT_SATA2 }, - [0x09] = { [PCIE1] = SLOT_PCIE1, [PCIE3] = SLOT_PCIE4, - [PCIE2] = SLOT_PCIE5 }, - [0x16] = { [PCIE1] = SLOT_PCIE1, [PCIE3] = SLOT_PCIE2, - [PCIE2] = SLOT_PCIE3, - [SATA1] = SLOT_SATA1, [SATA2] = SLOT_SATA2 }, - [0x17] = { [PCIE1] = SLOT_PCIE1, [PCIE3] = SLOT_PCIE2, - [PCIE2] = SLOT_PCIE3 }, - [0x1a] = { [PCIE1] = SLOT_PCIE1, [PCIE2] = SLOT_PCIE3, - [PCIE2] = SLOT_PCIE3, - [SATA1] = SLOT_SATA1, [SATA2] = SLOT_SATA2 }, - [0x1c] = { [PCIE1] = SLOT_PCIE1, - [SATA1] = SLOT_SATA1, [SATA2] = SLOT_SATA2 }, - [0x1e] = { [PCIE1] = SLOT_PCIE1, [PCIE3] = SLOT_PCIE3 }, - [0x1f] = { [PCIE1] = SLOT_PCIE1 }, -}; - - -/* - * Returns the name of the slot to which the PCIe or SATA controller is - * connected - */ -const char *board_serdes_name(enum srds_prtcl device) -{ - ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; - u32 pordevsr = in_be32(&gur->pordevsr); - unsigned int srds_cfg = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> - MPC85xx_PORDEVSR_IO_SEL_SHIFT; - enum slot_id slot = serdes_dev_slot[srds_cfg][device]; - const char *name = slot_names[slot]; - - if (name) - return name; - else - return "Nothing"; -} - -void hw_watchdog_reset(void) -{ - ccsr_gpio_t *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO3_ADDR); - - clrbits_be32(&pgpio->gpdat, 0x00000400); - setbits_be32(&pgpio->gpdat, 0x00000400); -} - -#ifdef CONFIG_TRAILBLAZER -int do_bootd(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) -{ - return run_command(env_get("bootcmd"), flag); -} - -int board_early_init_r(void) -{ - ccsr_gpio_t *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO3_ADDR); - - /* - * GPIO3_12 PPC_SYSTEMREADY# - */ - setbits_be32(&pgpio->gpdir, 0x00080000); - setbits_be32(&pgpio->gpodr, 0x00080000); - clrbits_be32(&pgpio->gpdat, 0x00080000); - - return ccdm_compute_self_hash(); -} - -int last_stage_init(void) -{ - startup_ccdm_id_module(); - return 0; -} - -#else -void pci_init_board(void) -{ - fsl_pcie_init_board(0); - - hydra_initialize(); -} - -int board_early_init_r(void) -{ - unsigned int k = 0; - ccsr_gpio_t *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO3_ADDR); - - /* wait for FPGA configuration to finish */ - while (!pca9698_get_value(0x22, 11) && (k++ < 30)) - udelay(100000); - - if (k > 30) { - puts("FPGA configuration timed out.\n"); - } else { - /* clear FPGA reset */ - udelay(1000); - setbits_be32(&pgpio->gpdat, 0x00100000); - } - - /* give time for PCIe link training */ - udelay(100000); - - /* - * GPIO3_12 PPC_SYSTEMREADY# - */ - setbits_be32(&pgpio->gpdir, 0x00080000); - setbits_be32(&pgpio->gpodr, 0x00080000); - clrbits_be32(&pgpio->gpdat, 0x00080000); - - return 0; -} - -int last_stage_init(void) -{ - /* Turn on Parade DP501 */ - pca9698_direction_output(0x22, 7, 1); - udelay(500000); - - dp501_powerup(0x08); - - startup_ccdm_id_module(); - - return 0; -} - -/* - * Initialize on-board and/or PCI Ethernet devices - * - * Returns: - * <0, error - * 0, no ethernet devices found - * >0, number of ethernet devices initialized - */ -int board_eth_init(struct bd_info *bis) -{ - struct fsl_pq_mdio_info mdio_info; - struct tsec_info_struct tsec_info[2]; - unsigned int num = 0; - -#ifdef CONFIG_TSEC1 - SET_STD_TSEC_INFO(tsec_info[num], 1); - num++; -#endif -#ifdef CONFIG_TSEC2 - SET_STD_TSEC_INFO(tsec_info[num], 2); - num++; -#endif - - mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR; - mdio_info.name = DEFAULT_MII_NAME; - fsl_pq_mdio_init(bis, &mdio_info); - - return tsec_eth_init(bis, tsec_info, num) + pci_eth_init(bis); -} - -#ifdef CONFIG_OF_BOARD_SETUP -int ft_board_setup(void *blob, struct bd_info *bd) -{ - phys_addr_t base; - phys_size_t size; - - ft_cpu_setup(blob, bd); - - base = env_get_bootm_low(); - size = env_get_bootm_size(); - - fdt_fixup_memory(blob, (u64)base, (u64)size); - -#ifdef CONFIG_HAS_FSL_DR_USB - fsl_fdt_fixup_dr_usb(blob, bd); -#endif - - FT_FSL_PCI_SETUP; - - return 0; -} -#endif - -static void hydra_initialize(void) -{ - unsigned int i; - pci_dev_t devno; - - /* Find and probe all the matching PCI devices */ - for (i = 0; (devno = pci_find_devices(hydra_supported, i)) >= 0; i++) { - u32 val; - struct ihs_fpga *fpga; - u32 versions; - u32 fpga_version; - u32 fpga_features; - - unsigned hardware_version; - unsigned feature_uart_channels; - unsigned feature_sb_channels; - - /* Try to enable I/O accesses and bus-mastering */ - val = PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER; - pci_write_config_dword(devno, PCI_COMMAND, val); - - /* Make sure it worked */ - pci_read_config_dword(devno, PCI_COMMAND, &val); - if (!(val & PCI_COMMAND_MEMORY)) { - puts("Can't enable I/O memory\n"); - continue; - } - if (!(val & PCI_COMMAND_MASTER)) { - puts("Can't enable bus-mastering\n"); - continue; - } - - /* read FPGA details */ - fpga = pci_map_bar(devno, PCI_BASE_ADDRESS_0, - PCI_REGION_MEM); - - /* disable sideband clocks */ - writel(1, &fpga->control); - - versions = readl(&fpga->versions); - fpga_version = readl(&fpga->fpga_version); - fpga_features = readl(&fpga->fpga_features); - - hardware_version = versions & 0xf; - feature_uart_channels = (fpga_features >> 6) & 0x1f; - feature_sb_channels = fpga_features & 0x1f; - - printf("FPGA%d: ", i); - - switch (hardware_version) { - case HWVER_100: - printf("HW-Ver 1.00\n"); - break; - - case HWVER_110: - printf("HW-Ver 1.10\n"); - break; - - case HWVER_120: - printf("HW-Ver 1.20\n"); - break; - - default: - printf("HW-Ver %d(not supported)\n", - hardware_version); - break; - } - - printf(" FPGA V %d.%02d, features:", - fpga_version / 100, fpga_version % 100); - - printf(" %d uart channel(s)", feature_uart_channels); - printf(" %d sideband channel(s)\n", feature_sb_channels); - } -} -#endif diff --git a/board/gdsys/p1022/ddr.c b/board/gdsys/p1022/ddr.c deleted file mode 100644 index eb06d2247111..000000000000 --- a/board/gdsys/p1022/ddr.c +++ /dev/null @@ -1,68 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright 2010 Freescale Semiconductor, Inc. - * Authors: Srikanth Srinivasan - * Timur Tabi - */ - -#include -#include -#include - -#include -#include - -void fsl_ddr_board_options(memctl_options_t *popts, dimm_params_t *pdimm, - unsigned int ctrl_num) -{ - unsigned int i; - - if (ctrl_num) { - printf("Wrong parameter for controller number %d", ctrl_num); - return; - } - if (!pdimm->n_ranks) - return; - - /* set odt_rd_cfg and odt_wr_cfg. */ - for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) { - popts->cs_local_opts[i].odt_rd_cfg = 0; - popts->cs_local_opts[i].odt_wr_cfg = 1; - } - - popts->clk_adjust = 5; - popts->cpo_override = 0x1f; - popts->write_data_delay = 2; - popts->half_strength_driver_enable = 1; - - /* Per AN4039, enable ZQ calibration. */ - popts->zq_en = 1; -} - -#ifdef CONFIG_SPD_EEPROM -/* - * we only have a "fake" SPD-EEPROM here, which has 16 bit addresses - */ -void get_spd(generic_spd_eeprom_t *spd, u8 i2c_address) -{ - int ret = i2c_read(i2c_address, 0, 2, (uchar *)spd, - sizeof(generic_spd_eeprom_t)); - - if (ret) { - if (i2c_address == -#ifdef SPD_EEPROM_ADDRESS - SPD_EEPROM_ADDRESS -#elif defined(SPD_EEPROM_ADDRESS1) - SPD_EEPROM_ADDRESS1 -#endif - ) { - printf("DDR: failed to read SPD from address %u\n", - i2c_address); - } else { - debug("DDR: failed to read SPD from address %u\n", - i2c_address); - } - memset(spd, 0, sizeof(generic_spd_eeprom_t)); - } -} -#endif diff --git a/board/gdsys/p1022/diu.c b/board/gdsys/p1022/diu.c deleted file mode 100644 index 9a5d3c11e14c..000000000000 --- a/board/gdsys/p1022/diu.c +++ /dev/null @@ -1,85 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright 2010-2011 Freescale Semiconductor, Inc. - * Authors: Timur Tabi - * - * FSL DIU Framebuffer driver - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define PMUXCR_ELBCDIU_MASK 0xc0000000 -#define PMUXCR_ELBCDIU_NOR16 0x80000000 -#define PMUXCR_ELBCDIU_DIU 0x40000000 - -/* - * DIU Area Descriptor - * - * Note that we need to byte-swap the value before it's written to the AD - * register. So even though the registers don't look like they're in the same - * bit positions as they are on the MPC8610, the same value is written to the - * AD register on the MPC8610 and on the P1022. - */ -#define AD_BYTE_F 0x10000000 -#define AD_ALPHA_C_SHIFT 25 -#define AD_BLUE_C_SHIFT 23 -#define AD_GREEN_C_SHIFT 21 -#define AD_RED_C_SHIFT 19 -#define AD_PIXEL_S_SHIFT 16 -#define AD_COMP_3_SHIFT 12 -#define AD_COMP_2_SHIFT 8 -#define AD_COMP_1_SHIFT 4 -#define AD_COMP_0_SHIFT 0 - -/* - * Variables used by the DIU/LBC switching code. It's safe to makes these - * global, because the DIU requires DDR, so we'll only run this code after - * relocation. - */ -static u32 pmuxcr; - -void diu_set_pixel_clock(unsigned int pixclock) -{ - ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - unsigned long speed_ccb, temp; - u32 pixval; - - speed_ccb = get_bus_freq(0); - temp = 1000000000 / pixclock; - temp *= 1000; - pixval = speed_ccb / temp; - debug("DIU pixval = %u\n", pixval); - - /* Modify PXCLK in GUTS CLKDVDR */ - temp = in_be32(&gur->clkdvdr) & 0x2000FFFF; - out_be32(&gur->clkdvdr, temp); /* turn off clock */ - out_be32(&gur->clkdvdr, temp | 0x80000000 | ((pixval & 0x1F) << 16)); -} - -int platform_diu_init(unsigned int xres, unsigned int yres, const char *port) -{ - ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - u32 pixel_format; - - pixel_format = cpu_to_le32(AD_BYTE_F | (3 << AD_ALPHA_C_SHIFT) | - (0 << AD_BLUE_C_SHIFT) | (1 << AD_GREEN_C_SHIFT) | - (2 << AD_RED_C_SHIFT) | (8 << AD_COMP_3_SHIFT) | - (8 << AD_COMP_2_SHIFT) | (8 << AD_COMP_1_SHIFT) | - (8 << AD_COMP_0_SHIFT) | (3 << AD_PIXEL_S_SHIFT)); - - printf("DIU: Switching to %ux%u\n", xres, yres); - - /* Set PMUXCR to switch the muxed pins from the LBC to the DIU */ - clrsetbits_be32(&gur->pmuxcr, PMUXCR_ELBCDIU_MASK, PMUXCR_ELBCDIU_DIU); - pmuxcr = in_be32(&gur->pmuxcr); - - return fsl_diu_init(xres, yres, pixel_format, 0); -} diff --git a/board/gdsys/p1022/law.c b/board/gdsys/p1022/law.c deleted file mode 100644 index 5214109943ab..000000000000 --- a/board/gdsys/p1022/law.c +++ /dev/null @@ -1,16 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright 2010 Freescale Semiconductor, Inc. - * Authors: Srikanth Srinivasan - * Timur Tabi - */ - -#include -#include -#include - -struct law_entry law_table[] = { - SET_LAW(CONFIG_SYS_ELBC_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_LBC), -}; - -int num_law_entries = ARRAY_SIZE(law_table); diff --git a/board/gdsys/p1022/sdhc_boot.c b/board/gdsys/p1022/sdhc_boot.c deleted file mode 100644 index 6a4a6ef6af24..000000000000 --- a/board/gdsys/p1022/sdhc_boot.c +++ /dev/null @@ -1,63 +0,0 @@ -/* - * Copyright 2011 Freescale Semiconductor, Inc. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include -#include - -/* - * The environment variables are written to just after the u-boot image - * on SDCard, so we must read the MBR to get the start address and code - * length of the u-boot image, then calculate the address of the env. - */ -#define ESDHC_BOOT_IMAGE_SIZE 0x48 -#define ESDHC_BOOT_IMAGE_ADDR 0x50 - -int mmc_get_env_addr(struct mmc *mmc, int copy, u32 *env_addr) -{ - u8 *tmp_buf; - u32 blklen, code_offset, code_len, n; - - blklen = mmc->read_bl_len; - tmp_buf = malloc(blklen); - if (!tmp_buf) - return 1; - - /* read out the first block, get the config data information */ - n = mmc->block_dev.block_read(&mmc->block_dev, 0, 1, tmp_buf); - if (!n) { - free(tmp_buf); - return 1; - } - - /* Get the Source Address, from offset 0x50 */ - code_offset = *(u32 *)(tmp_buf + ESDHC_BOOT_IMAGE_ADDR); - - /* Get the code size from offset 0x48 */ - code_len = *(u32 *)(tmp_buf + ESDHC_BOOT_IMAGE_SIZE); - - *env_addr = code_offset + code_len; - - free(tmp_buf); - - return 0; -} diff --git a/board/gdsys/p1022/tlb.c b/board/gdsys/p1022/tlb.c deleted file mode 100644 index 00139ac5e39c..000000000000 --- a/board/gdsys/p1022/tlb.c +++ /dev/null @@ -1,73 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright 2010 Freescale Semiconductor, Inc. - * Authors: Srikanth Srinivasan - * Timur Tabi - */ - -#include -#include - -struct fsl_e_tlb_entry tlb_table[] = { - /* TLB 0 - for temp stack in cache */ - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024, - CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024, - CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024, - CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - - /* TLB 1 */ - /* *I*** - Covers boot page */ - SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I, - 0, 0, BOOKE_PAGESZ_4K, 1), - - /* *I*G* - CCSRBAR */ - SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 1, BOOKE_PAGESZ_1M, 1), - - /* *I*G* - eLBC */ - SET_TLB_ENTRY(1, CONFIG_SYS_ELBC_BASE, CONFIG_SYS_ELBC_BASE_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 2, BOOKE_PAGESZ_1M, 1), - -#if defined(CONFIG_TRAILBLAZER) - /* *I*G - L2SRAM */ - SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L2_ADDR, CONFIG_SYS_INIT_L2_ADDR_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 9, BOOKE_PAGESZ_256K, 1), -#else - /* *I*G* - PCI */ - SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT, CONFIG_SYS_PCIE1_MEM_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 3, BOOKE_PAGESZ_256M, 1), - SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT + 0x10000000, - CONFIG_SYS_PCIE1_MEM_PHYS + 0x10000000, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 4, BOOKE_PAGESZ_256M, 1), - - /* *I*G* - PCI I/O */ - SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_IO_VIRT, CONFIG_SYS_PCIE1_IO_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 5, BOOKE_PAGESZ_256K, 1), - -#ifdef CONFIG_SYS_RAMBOOT - SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_M, - 0, 6, BOOKE_PAGESZ_1G, 1), -#endif -#endif -}; - -int num_tlb_entries = ARRAY_SIZE(tlb_table); diff --git a/configs/controlcenterd_36BIT_SDCARD_DEVELOP_defconfig b/configs/controlcenterd_36BIT_SDCARD_DEVELOP_defconfig deleted file mode 100644 index 41785d09d0fc..000000000000 --- a/configs/controlcenterd_36BIT_SDCARD_DEVELOP_defconfig +++ /dev/null @@ -1,69 +0,0 @@ -CONFIG_PPC=y -CONFIG_SYS_TEXT_BASE=0x11000000 -CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_OFFSET=0x0 -CONFIG_IDENT_STRING=" controlcenterd 0.01" -CONFIG_MPC85xx=y -CONFIG_TARGET_CONTROLCENTERD=y -CONFIG_PHYS_64BIT=y -CONFIG_FIT=y -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="SDCARD,DEVELOP" -CONFIG_BOOTDELAY=10 -# CONFIG_CONSOLE_MUX is not set -CONFIG_SYS_CONSOLE_IS_IN_ENV=y -# CONFIG_DISPLAY_BOARDINFO is not set -CONFIG_BOARD_EARLY_INIT_F=y -CONFIG_BOARD_EARLY_INIT_R=y -CONFIG_LAST_STAGE_INIT=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_REGINFO=y -CONFIG_CMD_EEPROM=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_PCI=y -CONFIG_CMD_SATA=y -CONFIG_CMD_SF=y -CONFIG_CMD_USB=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_BMP=y -CONFIG_MP=y -# CONFIG_CMD_HASH is not set -CONFIG_CMD_TPM=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_FAT=y -CONFIG_ENV_IS_IN_MMC=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_DM=y -CONFIG_FSL_SATA=y -CONFIG_FSL_ESDHC=y -CONFIG_SPI_FLASH=y -CONFIG_SF_DEFAULT_MODE=0 -CONFIG_SF_DEFAULT_SPEED=10000000 -CONFIG_SPI_FLASH_STMICRO=y -CONFIG_PHY_ATHEROS=y -CONFIG_PHY_BROADCOM=y -CONFIG_PHY_DAVICOM=y -CONFIG_PHY_LXT=y -CONFIG_PHY_MARVELL=y -CONFIG_PHY_NATSEMI=y -CONFIG_PHY_REALTEK=y -CONFIG_PHY_SMSC=y -CONFIG_PHY_VITESSE=y -CONFIG_MII=y -CONFIG_TSEC_ENET=y -CONFIG_CONS_INDEX=2 -CONFIG_SYS_NS16550=y -CONFIG_SPI=y -CONFIG_FSL_ESPI=y -CONFIG_TPM_AUTH_SESSIONS=y -CONFIG_USB=y -CONFIG_USB_STORAGE=y -CONFIG_VIDEO=y -# CONFIG_VIDEO_SW_CURSOR is not set -CONFIG_ADDR_MAP=y -CONFIG_TPM=y -CONFIG_OF_LIBFDT=y diff --git a/configs/controlcenterd_36BIT_SDCARD_defconfig b/configs/controlcenterd_36BIT_SDCARD_defconfig deleted file mode 100644 index 777f5aee41f8..000000000000 --- a/configs/controlcenterd_36BIT_SDCARD_defconfig +++ /dev/null @@ -1,69 +0,0 @@ -CONFIG_PPC=y -CONFIG_SYS_TEXT_BASE=0x11000000 -CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_OFFSET=0x0 -CONFIG_IDENT_STRING=" controlcenterd 0.01" -CONFIG_MPC85xx=y -CONFIG_TARGET_CONTROLCENTERD=y -CONFIG_PHYS_64BIT=y -CONFIG_FIT=y -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="SDCARD" -CONFIG_BOOTDELAY=10 -# CONFIG_CONSOLE_MUX is not set -CONFIG_SYS_CONSOLE_IS_IN_ENV=y -# CONFIG_DISPLAY_BOARDINFO is not set -CONFIG_BOARD_EARLY_INIT_F=y -CONFIG_BOARD_EARLY_INIT_R=y -CONFIG_LAST_STAGE_INIT=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_REGINFO=y -CONFIG_CMD_EEPROM=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_PCI=y -CONFIG_CMD_SATA=y -CONFIG_CMD_SF=y -CONFIG_CMD_USB=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_BMP=y -CONFIG_MP=y -# CONFIG_CMD_HASH is not set -CONFIG_CMD_TPM=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_FAT=y -CONFIG_ENV_IS_IN_MMC=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_DM=y -CONFIG_FSL_SATA=y -CONFIG_FSL_ESDHC=y -CONFIG_SPI_FLASH=y -CONFIG_SF_DEFAULT_MODE=0 -CONFIG_SF_DEFAULT_SPEED=10000000 -CONFIG_SPI_FLASH_STMICRO=y -CONFIG_PHY_ATHEROS=y -CONFIG_PHY_BROADCOM=y -CONFIG_PHY_DAVICOM=y -CONFIG_PHY_LXT=y -CONFIG_PHY_MARVELL=y -CONFIG_PHY_NATSEMI=y -CONFIG_PHY_REALTEK=y -CONFIG_PHY_SMSC=y -CONFIG_PHY_VITESSE=y -CONFIG_MII=y -CONFIG_TSEC_ENET=y -CONFIG_CONS_INDEX=2 -CONFIG_SYS_NS16550=y -CONFIG_SPI=y -CONFIG_FSL_ESPI=y -CONFIG_TPM_AUTH_SESSIONS=y -CONFIG_USB=y -CONFIG_USB_STORAGE=y -CONFIG_VIDEO=y -# CONFIG_VIDEO_SW_CURSOR is not set -CONFIG_ADDR_MAP=y -CONFIG_TPM=y -CONFIG_OF_LIBFDT=y diff --git a/configs/controlcenterd_TRAILBLAZER_DEVELOP_defconfig b/configs/controlcenterd_TRAILBLAZER_DEVELOP_defconfig deleted file mode 100644 index 9fc0f60d2dd8..000000000000 --- a/configs/controlcenterd_TRAILBLAZER_DEVELOP_defconfig +++ /dev/null @@ -1,36 +0,0 @@ -CONFIG_PPC=y -CONFIG_SYS_TEXT_BASE=0xf8fc0000 -CONFIG_ENV_SIZE=0x2000 -CONFIG_IDENT_STRING=" controlcenterd trailblazer 0.01" -CONFIG_MPC85xx=y -# CONFIG_CMD_ERRATA is not set -CONFIG_TARGET_CONTROLCENTERD=y -CONFIG_SYS_EXTRA_OPTIONS="TRAILBLAZER,SPIFLASH,DEVELOP" -CONFIG_BOOTDELAY=-2 -CONFIG_SYS_CONSOLE_IS_IN_ENV=y -# CONFIG_DISPLAY_BOARDINFO is not set -CONFIG_BOARD_EARLY_INIT_F=y -CONFIG_BOARD_EARLY_INIT_R=y -CONFIG_LAST_STAGE_INIT=y -# CONFIG_MISC_INIT_R is not set -# CONFIG_CMDLINE_EDITING is not set -# CONFIG_AUTO_COMPLETE is not set -# CONFIG_SYS_LONGHELP is not set -# CONFIG_CMD_BOOTM is not set -CONFIG_CMD_EEPROM=y -CONFIG_CMD_MMC=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_MP=y -# CONFIG_CMD_HASH is not set -CONFIG_CMD_TPM=y -# CONFIG_CMD_IRQ is not set -CONFIG_DOS_PARTITION=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_DM=y -CONFIG_FSL_ESDHC=y -# CONFIG_PCI is not set -CONFIG_CONS_INDEX=2 -CONFIG_SYS_NS16550=y -CONFIG_TPM_AUTH_SESSIONS=y -CONFIG_TPM=y -CONFIG_SHA1=y diff --git a/configs/controlcenterd_TRAILBLAZER_defconfig b/configs/controlcenterd_TRAILBLAZER_defconfig deleted file mode 100644 index 9ae0905d3fc1..000000000000 --- a/configs/controlcenterd_TRAILBLAZER_defconfig +++ /dev/null @@ -1,36 +0,0 @@ -CONFIG_PPC=y -CONFIG_SYS_TEXT_BASE=0xf8fc0000 -CONFIG_ENV_SIZE=0x2000 -CONFIG_IDENT_STRING=" controlcenterd trailblazer 0.01" -CONFIG_MPC85xx=y -# CONFIG_CMD_ERRATA is not set -CONFIG_TARGET_CONTROLCENTERD=y -CONFIG_SYS_EXTRA_OPTIONS="TRAILBLAZER,SPIFLASH" -CONFIG_BOOTDELAY=-2 -CONFIG_SYS_CONSOLE_IS_IN_ENV=y -# CONFIG_DISPLAY_BOARDINFO is not set -CONFIG_BOARD_EARLY_INIT_F=y -CONFIG_BOARD_EARLY_INIT_R=y -CONFIG_LAST_STAGE_INIT=y -# CONFIG_MISC_INIT_R is not set -# CONFIG_CMDLINE_EDITING is not set -# CONFIG_AUTO_COMPLETE is not set -# CONFIG_SYS_LONGHELP is not set -# CONFIG_CMD_BOOTM is not set -CONFIG_CMD_EEPROM=y -CONFIG_CMD_MMC=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_MP=y -# CONFIG_CMD_HASH is not set -CONFIG_CMD_TPM=y -# CONFIG_CMD_IRQ is not set -CONFIG_DOS_PARTITION=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_DM=y -CONFIG_FSL_ESDHC=y -# CONFIG_PCI is not set -CONFIG_CONS_INDEX=2 -CONFIG_SYS_NS16550=y -CONFIG_TPM_AUTH_SESSIONS=y -CONFIG_TPM=y -CONFIG_SHA1=y diff --git a/include/configs/controlcenterd.h b/include/configs/controlcenterd.h deleted file mode 100644 index 8ab8bb9f33c7..000000000000 --- a/include/configs/controlcenterd.h +++ /dev/null @@ -1,352 +0,0 @@ -/* - * (C) Copyright 2013 - * Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc - * - * based on P1022DS.h - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#include - -#ifdef CONFIG_SDCARD -#define CONFIG_RAMBOOT_SDCARD -#endif - -#ifdef CONFIG_SPIFLASH -#define CONFIG_RAMBOOT_SPIFLASH -#endif - -/* High Level Configuration Options */ -#define CONFIG_CONTROLCENTERD - -#define CONFIG_ENABLE_36BIT_PHYS - -#define CONFIG_L2_CACHE -#define CONFIG_BTB - -#define CONFIG_SYS_CLK_FREQ 66666600 -#define CONFIG_DDR_CLK_FREQ 66666600 - -#define CONFIG_SYS_RAMBOOT - -#ifdef CONFIG_TRAILBLAZER - -#define CONFIG_RESET_VECTOR_ADDRESS 0xf8fffffc -#define CONFIG_SYS_MONITOR_LEN (256 * 1024) - -/* - * Config the L2 Cache - */ -#define CONFIG_SYS_INIT_L2_ADDR 0xf8fc0000 -#ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_INIT_L2_ADDR_PHYS 0xff8fc0000ull -#else -#define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR -#endif -#define CONFIG_SYS_L2_SIZE (256 << 10) -#define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) - -#else /* CONFIG_TRAILBLAZER */ - -#define CONFIG_RESET_VECTOR_ADDRESS 0x1107fffc -#define CONFIG_SYS_MONITOR_LEN (512 * 1024) - -#endif /* CONFIG_TRAILBLAZER */ - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024) - -/* - * Memory map - * - * 0x0000_0000 0x3fff_ffff DDR 1G Cacheable - * 0xc000_0000 0xdfff_ffff PCI Express Mem 512M non-cacheable - * 0xffc0_0000 0xffc2_ffff PCI IO range 192K non-cacheable - * - * Localbus non-cacheable - * 0xe000_0000 0xe00f_ffff eLBC 1M non-cacheable - * 0xf8fc0000 0xf8ff_ffff L2 SRAM 256k Cacheable - * 0xffd0_0000 0xffd0_3fff L1 for stack 16K Cacheable TLB0 - * 0xffe0_0000 0xffef_ffff CCSR 1M non-cacheable - */ - -#define CONFIG_SYS_INIT_RAM_LOCK -#define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* Initial L1 address */ -#define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 /* used area in RAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#ifdef CONFIG_TRAILBLAZER -/* leave CCSRBAR at default, because u-boot expects it to be exactly there */ -#define CONFIG_SYS_CCSRBAR CONFIG_SYS_CCSRBAR_DEFAULT -#else -#define CONFIG_SYS_CCSRBAR 0xffe00000 -#endif -#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR -#define CONFIG_SYS_MPC85xx_GPIO3_ADDR (CONFIG_SYS_CCSRBAR+0xf200) - -/* - * DDR Setup - */ - -#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE -#define CONFIG_SYS_SDRAM_SIZE 1024 -#define CONFIG_VERY_BIG_RAM - -#define CONFIG_DIMM_SLOTS_PER_CTLR 1 -#define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR) - -#ifdef CONFIG_TRAILBLAZER -#define CONFIG_SPD_EEPROM -#define SPD_EEPROM_ADDRESS 0x52 -/*#define CONFIG_FSL_DDR_INTERACTIVE*/ -#endif - -/* - * Local Bus Definitions - */ - -#define CONFIG_SYS_ELBC_BASE 0xe0000000 -#ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_ELBC_BASE_PHYS 0xfe0000000ull -#else -#define CONFIG_SYS_ELBC_BASE_PHYS CONFIG_SYS_ELBC_BASE -#endif - -#define CONFIG_UART_BR_PRELIM \ - (BR_PHYS_ADDR((CONFIG_SYS_ELBC_BASE_PHYS)) | BR_PS_8 | BR_V) -#define CONFIG_UART_OR_PRELIM (OR_AM_32KB | 0xff7) - -#define CONFIG_SYS_BR0_PRELIM 0 /* CS0 was originally intended for FPGA */ -#define CONFIG_SYS_OR0_PRELIM 0 /* debugging, was never used */ - -#define CONFIG_SYS_BR1_PRELIM CONFIG_UART_BR_PRELIM -#define CONFIG_SYS_OR1_PRELIM CONFIG_UART_OR_PRELIM - -/* - * Serial Port - */ -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE 1 -#define CONFIG_SYS_NS16550_CLK get_bus_freq(0) - -#define CONFIG_SYS_BAUDRATE_TABLE \ - {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} - -#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) -#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) - -/* - * I2C - */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_FSL -#define CONFIG_SYS_FSL_I2C_SPEED 400000 -#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F -#define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 -#define CONFIG_SYS_FSL_I2C2_SPEED 400000 -#define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F -#define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100 - -#define CONFIG_PCA9698 /* NXP PCA9698 */ - -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x52 -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 - -/* - * MMC - */ -#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR - -#ifndef CONFIG_TRAILBLAZER - -/* - * Video - */ -#define CONFIG_FSL_DIU_FB -#define CONFIG_SYS_DIU_ADDR (CONFIG_SYS_CCSRBAR + 0x10000) - -/* - * General PCI - * Memory space is mapped 1-1, but I/O space must start from 0. - */ -#define CONFIG_PCIE1 /* PCIE controller 1 (slot 1) */ -#define CONFIG_PCI_INDIRECT_BRIDGE -#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ -#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ - -#define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ - -#define CONFIG_SYS_PCIE1_MEM_VIRT 0xc0000000 -#ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 -#define CONFIG_SYS_PCIE1_MEM_PHYS 0xc40000000ull -#else -#define CONFIG_SYS_PCIE1_MEM_BUS 0xc0000000 -#define CONFIG_SYS_PCIE1_MEM_PHYS 0xc0000000 -#endif -#define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ -#define CONFIG_SYS_PCIE1_IO_VIRT 0xffc20000 -#define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 -#ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_PCIE1_IO_PHYS 0xfffc20000ull -#else -#define CONFIG_SYS_PCIE1_IO_PHYS 0xffc20000 -#endif -#define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ - -/* - * SATA - */ -#define CONFIG_LBA48 - -#define CONFIG_SYS_SATA_MAX_DEVICE 2 -#define CONFIG_SATA1 -#define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR -#define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA -#define CONFIG_SATA2 -#define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR -#define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA - -/* - * Ethernet - */ - -#define CONFIG_TSECV2 - -#define CONFIG_TSEC1 1 -#define CONFIG_TSEC1_NAME "eTSEC1" -#define CONFIG_TSEC2 1 -#define CONFIG_TSEC2_NAME "eTSEC2" - -#define TSEC1_PHY_ADDR 0 -#define TSEC2_PHY_ADDR 1 - -#define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) -#define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) - -#define TSEC1_PHYIDX 0 -#define TSEC2_PHYIDX 0 - -#define CONFIG_ETHPRIME "eTSEC1" - -/* - * USB - */ - -#define CONFIG_HAS_FSL_DR_USB -#define CONFIG_USB_EHCI_FSL -#define CONFIG_EHCI_HCD_INIT_AFTER_RESET - -#endif /* CONFIG_TRAILBLAZER */ - -/* - * Environment - */ -#if defined(CONFIG_TRAILBLAZER) -#elif defined(CONFIG_RAMBOOT_SDCARD) -#define CONFIG_FSL_FIXED_MMC_LOCATION -#endif - -#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ - -#ifndef CONFIG_TRAILBLAZER -/* - * Board initialisation callbacks - */ -#endif /* CONFIG_TRAILBLAZER */ - -/* - * Miscellaneous configurable options - */ -#define CONFIG_HW_WATCHDOG -#define CONFIG_LOADS_ECHO -#define CONFIG_SYS_LOADS_BAUD_CHANGE - -/* - * For booting Linux, the board info and command line data - * have to be in the first 64 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Linux Memory map */ -#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ - -/* - * Environment Configuration - */ - -#ifdef CONFIG_TRAILBLAZER -#define CONFIG_EXTRA_ENV_SETTINGS \ - "mp_holdoff=1\0" - -#else - -#define CONFIG_HOSTNAME "controlcenterd" -#define CONFIG_ROOTPATH "/opt/nfsroot" -#define CONFIG_BOOTFILE "uImage" -#define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP */ - -#define CONFIG_LOADADDR 1000000 - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ - "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ - "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ - "tftpflash=tftpboot $loadaddr $uboot && " \ - "protect off $ubootaddr +$filesize && " \ - "erase $ubootaddr +$filesize && " \ - "cp.b $loadaddr $ubootaddr $filesize && " \ - "protect on $ubootaddr +$filesize && " \ - "cmp.b $loadaddr $ubootaddr $filesize\0" \ - "consoledev=ttyS1\0" \ - "ramdiskaddr=2000000\0" \ - "ramdiskfile=rootfs.ext2.gz.uboot\0" \ - "fdtaddr=1e00000\0" \ - "fdtfile=controlcenterd.dtb\0" \ - "bdev=sda3\0" - -/* these are used and NUL-terminated in env_default.h */ -#define CONFIG_NFSBOOTCOMMAND \ - "setenv bootargs root=/dev/nfs rw " \ - "nfsroot=$serverip:$rootpath " \ - "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ - "console=$consoledev,$baudrate $othbootargs $videobootargs;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr - $fdtaddr" - -#define CONFIG_RAMBOOTCOMMAND \ - "setenv bootargs root=/dev/ram rw " \ - "console=$consoledev,$baudrate $othbootargs $videobootargs;" \ - "tftp $ramdiskaddr $ramdiskfile;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr $ramdiskaddr $fdtaddr" - -#define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND - -#endif /* CONFIG_TRAILBLAZER */ - -#endif