diff mbox series

[18/57] arm: Remove bcm23550_w1d board

Message ID 20210221010634.21310-19-trini@konsulko.com
State Accepted
Commit 938c1747383de6c1269d1cf838d05758b7a43a18
Delegated to: Tom Rini
Headers show
Series Enforce DM_MMC migration and remove platforms | expand

Commit Message

Tom Rini Feb. 21, 2021, 1:05 a.m. UTC 
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Steve Rae <steve.rae@raedomain.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
---
 arch/arm/Kconfig                           |   7 --
 board/broadcom/bcm23550_w1d/Kconfig        |  15 ---
 board/broadcom/bcm23550_w1d/MAINTAINERS    |   6 -
 board/broadcom/bcm23550_w1d/Makefile       |   5 -
 board/broadcom/bcm23550_w1d/bcm23550_w1d.c | 125 ---------------------
 configs/bcm23550_w1d_defconfig             |  47 --------
 include/configs/bcm23550_w1d.h             | 100 -----------------
 7 files changed, 305 deletions(-)
 delete mode 100644 board/broadcom/bcm23550_w1d/Kconfig
 delete mode 100644 board/broadcom/bcm23550_w1d/MAINTAINERS
 delete mode 100644 board/broadcom/bcm23550_w1d/Makefile
 delete mode 100644 board/broadcom/bcm23550_w1d/bcm23550_w1d.c
 delete mode 100644 configs/bcm23550_w1d_defconfig
 delete mode 100644 include/configs/bcm23550_w1d.h

Comments

Tom Rini April 12, 2021, 12:26 a.m. UTC | #1 
On Sat, Feb 20, 2021 at 08:05:55PM -0500, Tom Rini wrote:

> This board has not been converted to CONFIG_DM_MMC by the deadline.
> Remove it.
> 
> Cc: Steve Rae <steve.rae@raedomain.com>
> Signed-off-by: Tom Rini <trini@konsulko.com>

Applied to u-boot/master, thanks!
diff mbox series

Patch

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 6cf49b8ef050..9777dd6d4d9a 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -656,12 +656,6 @@  config ARCH_BCMSTB
 	  This enables support for Broadcom ARM-based set-top box
 	  chipsets, including the 7445 family of chips.
 
-config TARGET_BCM23550_W1D
-	bool "Support bcm23550_w1d"
-	select CPU_V7A
-	imply CRC32_VERIFY
-	imply FAT_WRITE
-
 config TARGET_BCMCYGNUS
 	bool "Support bcmcygnus"
 	select CPU_V7A
@@ -1925,7 +1919,6 @@  source "board/Marvell/octeontx/Kconfig"
 source "board/Marvell/octeontx2/Kconfig"
 source "board/armltd/vexpress64/Kconfig"
 source "board/cortina/presidio-asic/Kconfig"
-source "board/broadcom/bcm23550_w1d/Kconfig"
 source "board/broadcom/bcm963158/Kconfig"
 source "board/broadcom/bcm968360bg/Kconfig"
 source "board/broadcom/bcm968580xref/Kconfig"
diff --git a/board/broadcom/bcm23550_w1d/Kconfig b/board/broadcom/bcm23550_w1d/Kconfig
deleted file mode 100644
index 007a127250d6..000000000000
--- a/board/broadcom/bcm23550_w1d/Kconfig
+++ /dev/null
@@ -1,15 +0,0 @@ 
-if TARGET_BCM23550_W1D
-
-config SYS_BOARD
-	default "bcm23550_w1d"
-
-config SYS_VENDOR
-	default "broadcom"
-
-config SYS_SOC
-	default "bcm235xx"
-
-config SYS_CONFIG_NAME
-	default "bcm23550_w1d"
-
-endif
diff --git a/board/broadcom/bcm23550_w1d/MAINTAINERS b/board/broadcom/bcm23550_w1d/MAINTAINERS
deleted file mode 100644
index bde6337ce34f..000000000000
--- a/board/broadcom/bcm23550_w1d/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@ 
-BCM23550_W1D BOARD
-M:	Steve Rae <steve.rae@raedomain.com>
-S:	Maintained
-F:	board/broadcom/bcm23550_w1d/
-F:	include/configs/bcm23550_w1d.h
-F:	configs/bcm23550_w1d_defconfig
diff --git a/board/broadcom/bcm23550_w1d/Makefile b/board/broadcom/bcm23550_w1d/Makefile
deleted file mode 100644
index 0552f3762e80..000000000000
--- a/board/broadcom/bcm23550_w1d/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@ 
-# SPDX-License-Identifier: GPL-2.0+
-#
-# Copyright 2013 Broadcom Corporation.
-
-obj-y	+= bcm23550_w1d.o
diff --git a/board/broadcom/bcm23550_w1d/bcm23550_w1d.c b/board/broadcom/bcm23550_w1d/bcm23550_w1d.c
deleted file mode 100644
index 90685c072a3b..000000000000
--- a/board/broadcom/bcm23550_w1d/bcm23550_w1d.c
+++ /dev/null
@@ -1,125 +0,0 @@ 
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2013 Broadcom Corporation.
- */
-
-#include <common.h>
-#include <init.h>
-#include <log.h>
-#include <asm/global_data.h>
-#include <asm/io.h>
-#include <asm/mach-types.h>
-#include <env.h>
-#include <mmc.h>
-#include <asm/kona-common/kona_sdhci.h>
-#include <asm/kona-common/clk.h>
-#include <asm/arch/sysmap.h>
-
-#include <usb.h>
-#include <usb/dwc2_udc.h>
-#include <g_dnl.h>
-
-#define SECWATCHDOG_SDOGCR_OFFSET	0x00000000
-#define SECWATCHDOG_SDOGCR_EN_SHIFT	27
-#define SECWATCHDOG_SDOGCR_SRSTEN_SHIFT	26
-#define SECWATCHDOG_SDOGCR_CLKS_SHIFT	20
-#define SECWATCHDOG_SDOGCR_LD_SHIFT	0
-
-#ifndef CONFIG_USB_SERIALNO
-#define CONFIG_USB_SERIALNO "1234567890"
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * board_init - early hardware init
- */
-int board_init(void)
-{
-	printf("Relocation Offset is: %08lx\n", gd->reloc_off);
-
-	/* adress of boot parameters */
-	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
-
-	clk_init();
-
-	return 0;
-}
-
-/*
- * misc_init_r - miscellaneous platform dependent initializations
- */
-int misc_init_r(void)
-{
-	return 0;
-}
-
-/*
- * dram_init - sets uboots idea of sdram size
- */
-int dram_init(void)
-{
-	gd->ram_size = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE,
-				    CONFIG_SYS_SDRAM_SIZE);
-	return 0;
-}
-
-/* This is called after dram_init() so use get_ram_size result */
-int dram_init_banksize(void)
-{
-	gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
-	gd->bd->bi_dram[0].size = gd->ram_size;
-
-	return 0;
-}
-
-#ifdef CONFIG_MMC_SDHCI_KONA
-/*
- * mmc_init - Initializes mmc
- */
-int board_mmc_init(struct bd_info *bis)
-{
-	int ret = 0;
-
-	/* Register eMMC - SDIO2 */
-	ret = kona_sdhci_init(1, 400000, 0);
-	if (ret)
-		return ret;
-
-	/* Register SD Card - SDIO4 kona_mmc_init assumes 0 based index */
-	ret = kona_sdhci_init(3, 400000, 0);
-	return ret;
-}
-#endif
-
-#ifdef CONFIG_USB_GADGET
-static struct dwc2_plat_otg_data bcm_otg_data = {
-	.regs_otg	= HSOTG_BASE_ADDR
-};
-
-int board_usb_init(int index, enum usb_init_type init)
-{
-	debug("%s: performing dwc2_udc_probe\n", __func__);
-	return dwc2_udc_probe(&bcm_otg_data);
-}
-
-int g_dnl_bind_fixup(struct usb_device_descriptor *dev, const char *name)
-{
-	debug("%s\n", __func__);
-	if (!env_get("serial#"))
-		g_dnl_set_serialnumber(CONFIG_USB_SERIALNO);
-	return 0;
-}
-
-int g_dnl_get_board_bcd_device_number(int gcnum)
-{
-	debug("%s\n", __func__);
-	return 1;
-}
-
-int board_usb_cleanup(int index, enum usb_init_type init)
-{
-	debug("%s\n", __func__);
-	return 0;
-}
-#endif
diff --git a/configs/bcm23550_w1d_defconfig b/configs/bcm23550_w1d_defconfig
deleted file mode 100644
index 021de69799b5..000000000000
--- a/configs/bcm23550_w1d_defconfig
+++ /dev/null
@@ -1,47 +0,0 @@ 
-CONFIG_ARM=y
-CONFIG_SYS_ICACHE_OFF=y
-CONFIG_SYS_DCACHE_OFF=y
-CONFIG_ENABLE_ARM_SOC_BOOT0_HOOK=y
-CONFIG_TARGET_BCM23550_W1D=y
-CONFIG_SYS_TEXT_BASE=0x9f000000
-CONFIG_NR_DRAM_BANKS=1
-CONFIG_ENV_SIZE=0x1000
-CONFIG_ENV_OFFSET=0x2340000
-# CONFIG_ANDROID_BOOT_IMAGE is not set
-# CONFIG_DISPLAY_CPUINFO is not set
-# CONFIG_DISPLAY_BOARDINFO is not set
-CONFIG_MISC_INIT_R=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_BOOTZ=y
-CONFIG_CMD_ASKENV=y
-CONFIG_CMD_MX_CYCLIC=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_FAT=y
-CONFIG_EFI_PARTITION=y
-# CONFIG_PARTITION_UUIDS is not set
-CONFIG_ENV_IS_IN_MMC=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_VERSION_VARIABLE=y
-# CONFIG_NET is not set
-CONFIG_USB_FUNCTION_FASTBOOT=y
-CONFIG_FASTBOOT_BUF_ADDR=0x80000000
-CONFIG_FASTBOOT_BUF_SIZE=0x1D000000
-CONFIG_FASTBOOT_FLASH=y
-CONFIG_FASTBOOT_FLASH_MMC_DEV=0
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_SDMA=y
-CONFIG_MMC_SDHCI_KONA=y
-CONFIG_SYS_NS16550=y
-CONFIG_USB=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_MANUFACTURER="Broadcom Corporation"
-CONFIG_USB_GADGET_VENDOR_NUM=0x18d1
-CONFIG_USB_GADGET_PRODUCT_NUM=0x0d02
-CONFIG_USB_GADGET_BCM_UDC_OTG_PHY=y
-CONFIG_USB_GADGET_DWC2_OTG=y
-CONFIG_USB_GADGET_DWC2_OTG_PHY_BUS_WIDTH_8=y
-CONFIG_OF_LIBFDT=y
diff --git a/include/configs/bcm23550_w1d.h b/include/configs/bcm23550_w1d.h
deleted file mode 100644
index 05ada258eacf..000000000000
--- a/include/configs/bcm23550_w1d.h
+++ /dev/null
@@ -1,100 +0,0 @@ 
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright 2013 Broadcom Corporation.
- */
-
-#ifndef __BCM23550_W1D_H
-#define __BCM23550_W1D_H
-
-#include <linux/sizes.h>
-#include <asm/arch/sysmap.h>
-
-/* CPU, chip, mach, etc */
-#define CONFIG_KONA
-#define CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_KONA_RESET_S
-
-/*
- * Memory configuration
- */
-
-#define CONFIG_SYS_SDRAM_BASE		0x80000000
-#define CONFIG_SYS_SDRAM_SIZE		0x20000000
-
-#define CONFIG_SYS_MALLOC_LEN		SZ_4M	/* see armv7/start.S. */
-
-/* GPIO Driver */
-#define CONFIG_KONA_GPIO
-
-/* MMC/SD Driver */
-#define CONFIG_SYS_SDIO_BASE0 SDIO1_BASE_ADDR
-#define CONFIG_SYS_SDIO_BASE1 SDIO2_BASE_ADDR
-#define CONFIG_SYS_SDIO_BASE2 SDIO3_BASE_ADDR
-#define CONFIG_SYS_SDIO_BASE3 SDIO4_BASE_ADDR
-#define CONFIG_SYS_SDIO0_MAX_CLK 48000000
-#define CONFIG_SYS_SDIO1_MAX_CLK 48000000
-#define CONFIG_SYS_SDIO2_MAX_CLK 48000000
-#define CONFIG_SYS_SDIO3_MAX_CLK 48000000
-#define CONFIG_SYS_SDIO0 "sdio1"
-#define CONFIG_SYS_SDIO1 "sdio2"
-#define CONFIG_SYS_SDIO2 "sdio3"
-#define CONFIG_SYS_SDIO3 "sdio4"
-
-/* I2C Driver */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_KONA
-#define CONFIG_SYS_SPD_BUS_NUM	3	/* Start with PMU bus */
-#define CONFIG_SYS_MAX_I2C_BUS	4
-#define CONFIG_SYS_I2C_BASE0	BSC1_BASE_ADDR
-#define CONFIG_SYS_I2C_BASE1	BSC2_BASE_ADDR
-#define CONFIG_SYS_I2C_BASE2	BSC3_BASE_ADDR
-#define CONFIG_SYS_I2C_BASE3	PMU_BSC_BASE_ADDR
-
-/* Timer Driver */
-#define CONFIG_SYS_TIMER_RATE		32000
-#define CONFIG_SYS_TIMER_COUNTER	(TIMER_BASE_ADDR + 4) /* STCLO offset */
-
-/* Init functions */
-
-/* Some commands use this as the default load address */
-#define CONFIG_SYS_LOAD_ADDR		CONFIG_SYS_SDRAM_BASE
-
-/* No mtest functions as recommended */
-
-/*
- * This is the initial SP which is used only briefly for relocating the u-boot
- * image to the top of SDRAM. After relocation u-boot moves the stack to the
- * proper place.
- */
-#define CONFIG_SYS_INIT_SP_ADDR		CONFIG_SYS_TEXT_BASE
-
-/* Serial Info */
-#define CONFIG_SYS_NS16550_SERIAL
-/* Post pad 3 bytes after each reg addr */
-#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
-#define CONFIG_SYS_NS16550_CLK		13000000
-#define CONFIG_SYS_NS16550_COM1		0x3e000000
-
-/* must fit into GPT:u-boot-env partition */
-
-/* console configuration */
-#define CONFIG_SYS_CBSIZE		1024	/* Console buffer size */
-#define CONFIG_SYS_MAXARGS		64
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
-
-/*
- * One partition type must be defined for part.c
- * This is necessary for the fatls command to work on an SD card
- * for example.
- */
-
-/* version string, parser, etc */
-
-/* Initial upstream - boot to cmd prompt only */
-#define CONFIG_BOOTCOMMAND		""
-
-#define CONFIG_USBID_ADDR		0x34052c46
-
-#define CONFIG_SYS_L2CACHE_OFF
-
-#endif /* __BCM23550_W1D_H */