diff mbox series

[v5,8/9] arm: dts: ls1028a: add Ethernet switch node and dependencies

Message ID 20210216211936.3291988-9-olteanv@gmail.com
State Deferred
Delegated to: Tom Rini
Headers show
Series Introduce DSA Ethernet switch class and Felix driver | expand

Commit Message

Vladimir Oltean Feb. 16, 2021, 9:19 p.m. UTC 
From: Alex Marginean <alexandru.marginean@nxp.com>

The definition follows the DSA binding in kernel and describes the switch,
its ports and PHYs. The switch node has the same structure as in Linux
and this patch enables it (and relevant ports) for the LS1028A RDB board.

ENETC PF6 is the 2nd Eth controller linked to the switch on LS1028A, it is
not used in U-Boot and was disabled.  Ethernet port aliases were also
added to better manage the multitude of ports available now.

Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Michael Walle <michael@walle.cc>
---
v5: none.

v4: none.

v3: Added a comment denoting the PHY model present on the RDB.

v2: Switch node structure defined in dtsi now consistent with the Linux
switch node definition. Moved aliases from dtsi to the RDB DTS to
minimize impact on other boards (and for improved flexibility).

 arch/arm/dts/fsl-ls1028a-rdb.dts | 64 ++++++++++++++++++++++++++++++++
 arch/arm/dts/fsl-ls1028a.dtsi    | 55 ++++++++++++++++++++++++++-
 2 files changed, 118 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/arch/arm/dts/fsl-ls1028a-rdb.dts b/arch/arm/dts/fsl-ls1028a-rdb.dts
index 85b4815b2ed7..3432fca35269 100644
--- a/arch/arm/dts/fsl-ls1028a-rdb.dts
+++ b/arch/arm/dts/fsl-ls1028a-rdb.dts
@@ -15,6 +15,12 @@ 
 	compatible = "fsl,ls1028a-rdb", "fsl,ls1028a";
 	aliases {
 		spi0 = &fspi;
+		eth0 = &enetc0;
+		eth1 = &enetc2;
+		eth2 = &mscc_felix_port0;
+		eth3 = &mscc_felix_port1;
+		eth4 = &mscc_felix_port2;
+		eth5 = &mscc_felix_port3;
 	};
 };
 
@@ -131,9 +137,67 @@ 
 	phy-handle = <&rdb_phy0>;
 };
 
+&enetc2 {
+	status = "okay";
+};
+
+&mscc_felix {
+	status = "okay";
+};
+
+&mscc_felix_port0 {
+	label = "swp0";
+	phy-handle = <&sw_phy0>;
+	phy-mode = "qsgmii";
+	status = "okay";
+};
+
+&mscc_felix_port1 {
+	label = "swp1";
+	phy-handle = <&sw_phy1>;
+	phy-mode = "qsgmii";
+	status = "okay";
+};
+
+&mscc_felix_port2 {
+	label = "swp2";
+	phy-handle = <&sw_phy2>;
+	phy-mode = "qsgmii";
+	status = "okay";
+};
+
+&mscc_felix_port3 {
+	label = "swp3";
+	phy-handle = <&sw_phy3>;
+	phy-mode = "qsgmii";
+	status = "okay";
+};
+
+&mscc_felix_port4 {
+	ethernet = <&enetc2>;
+	status = "okay";
+};
+
 &mdio0 {
 	status = "okay";
 	rdb_phy0: phy@2 {
 		reg = <2>;
 	};
+
+	/* VSC8514 QSGMII PHY */
+	sw_phy0: phy@10 {
+		reg = <0x10>;
+	};
+
+	sw_phy1: phy@11 {
+		reg = <0x11>;
+	};
+
+	sw_phy2: phy@12 {
+		reg = <0x12>;
+	};
+
+	sw_phy3: phy@13 {
+		reg = <0x13>;
+	};
 };
diff --git a/arch/arm/dts/fsl-ls1028a.dtsi b/arch/arm/dts/fsl-ls1028a.dtsi
index 5171bf28c79e..22d107d959de 100644
--- a/arch/arm/dts/fsl-ls1028a.dtsi
+++ b/arch/arm/dts/fsl-ls1028a.dtsi
@@ -151,9 +151,62 @@ 
 			reg = <0x000300 0 0 0 0>;
 			status = "disabled";
 		};
+
+		mscc_felix: pci@0,5 {
+			reg = <0x000500 0 0 0 0>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				mscc_felix_port0: port@0 {
+					reg = <0>;
+					status = "disabled";
+				};
+
+				mscc_felix_port1: port@1 {
+					reg = <1>;
+					status = "disabled";
+				};
+
+				mscc_felix_port2: port@2 {
+					reg = <2>;
+					status = "disabled";
+				};
+
+				mscc_felix_port3: port@3 {
+					reg = <3>;
+					status = "disabled";
+				};
+
+				mscc_felix_port4: port@4 {
+					reg = <4>;
+					phy-mode = "internal";
+					status = "disabled";
+
+					fixed-link {
+						speed = <2500>;
+						full-duplex;
+					};
+				};
+
+				mscc_felix_port5: port@5 {
+					reg = <5>;
+					phy-mode = "internal";
+					status = "disabled";
+
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+					};
+				};
+			};
+		};
+
 		enetc6: pci@0,6 {
 			reg = <0x000600 0 0 0 0>;
-			status = "okay";
+			status = "disabled";
 			phy-mode = "internal";
 		};
 	};