@@ -577,6 +577,24 @@ static int brcm_pcie_probe(struct udevice *dev)
return 0;
}
+static int brcm_pcie_remove(struct udevice *dev)
+{
+ struct brcm_pcie *pcie = dev_get_priv(dev);
+ void __iomem *base = pcie->base;
+
+ /* Assert fundamental reset */
+ setbits_le32(base + PCIE_RGR1_SW_INIT_1, RGR1_SW_INIT_1_PERST_MASK);
+
+ /* Turn off SerDes */
+ setbits_le32(base + PCIE_MISC_HARD_PCIE_HARD_DEBUG,
+ PCIE_HARD_DEBUG_SERDES_IDDQ_MASK);
+
+ /* Shutdown bridge */
+ setbits_le32(base + PCIE_RGR1_SW_INIT_1, RGR1_SW_INIT_1_INIT_MASK);
+
+ return 0;
+}
+
static int brcm_pcie_of_to_plat(struct udevice *dev)
{
struct brcm_pcie *pcie = dev_get_priv(dev);
@@ -616,6 +634,8 @@ U_BOOT_DRIVER(pcie_brcm_base) = {
.ops = &brcm_pcie_ops,
.of_match = brcm_pcie_ids,
.probe = brcm_pcie_probe,
+ .remove = brcm_pcie_remove,
.of_to_plat = brcm_pcie_of_to_plat,
.priv_auto = sizeof(struct brcm_pcie),
+ .flags = DM_FLAG_OS_PREPARE,
};
Make sure we handover the PCIe controller in a clean state. Some of the devices hanging from the PCIe bus might need to be properly reset through #PERST in order for Linux to be able to initialize them. This is specially important in order to properly initialize Raspberry Pi 4 B and 400's USB chip. Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> --- drivers/pci/pcie_brcmstb.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+)