Message ID | 20201105091537.6756-1-holger.brunck@hitachi-powergrids.com |
---|---|
State | Accepted |
Commit | 4cb8a10f7e6f50a8c71e41df1207264266bfa305 |
Delegated to: | Tom Rini |
Headers | show |
Series | remove obsolete option CONFIG_JFFS2_CMDLINE | expand |
On 05.11.20 10:15, Holger Brunck wrote: > This option is obsolete since 2009 and can be removed globally. > > CC: Stefan Roese <sr@denx.de> > Signed-off-by: Holger Brunck <holger.brunck@hitachi-powergrids.com> Reviewed-by: Stefan Roese <sr@denx.de> Thanks, Stefan > --- > include/configs/ethernut5.h | 1 - > include/configs/km/km-powerpc.h | 2 -- > include/configs/kmp204x.h | 3 --- > include/configs/pm9263.h | 1 - > include/configs/stmark2.h | 1 - > scripts/config_whitelist.txt | 1 - > 6 files changed, 9 deletions(-) > > diff --git a/include/configs/ethernut5.h b/include/configs/ethernut5.h > index b513b4bc68..ca249d9d2b 100644 > --- a/include/configs/ethernut5.h > +++ b/include/configs/ethernut5.h > @@ -62,7 +62,6 @@ > > /* JFFS2 */ > #ifdef CONFIG_CMD_JFFS2 > -#define CONFIG_JFFS2_CMDLINE > #define CONFIG_JFFS2_NAND > #endif > > diff --git a/include/configs/km/km-powerpc.h b/include/configs/km/km-powerpc.h > index 7bfe12fecb..3be926c103 100644 > --- a/include/configs/km/km-powerpc.h > +++ b/include/configs/km/km-powerpc.h > @@ -9,8 +9,6 @@ > > /* Do boardspecific init for all boards */ > > -#define CONFIG_JFFS2_CMDLINE > - > /* EEprom support 24C08, 24C16, 24C64 */ > #define CONFIG_SYS_EEPROM_PAGE_WRITE_ENABLE > #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 /* 8 Byte write page */ > diff --git a/include/configs/kmp204x.h b/include/configs/kmp204x.h > index ec1254e747..d1eb7b574b 100644 > --- a/include/configs/kmp204x.h > +++ b/include/configs/kmp204x.h > @@ -337,9 +337,6 @@ int get_scl(void); > * additionnal command line configuration. > */ > > -/* we don't need flash support */ > -#undef CONFIG_JFFS2_CMDLINE > - > /* > * For booting Linux, the board info and command line data > * have to be in the first 64 MB of memory, since this is > diff --git a/include/configs/pm9263.h b/include/configs/pm9263.h > index 0ed4b1aaa2..6c882b6ff9 100644 > --- a/include/configs/pm9263.h > +++ b/include/configs/pm9263.h > @@ -190,7 +190,6 @@ > > #endif > > -#define CONFIG_JFFS2_CMDLINE 1 > #define CONFIG_JFFS2_NAND 1 > #define CONFIG_JFFS2_DEV "nand0" /* NAND device jffs2 lives on */ > #define CONFIG_JFFS2_PART_OFFSET 0 /* start of jffs2 partition */ > diff --git a/include/configs/stmark2.h b/include/configs/stmark2.h > index d9a2f75e73..da162cbb11 100644 > --- a/include/configs/stmark2.h > +++ b/include/configs/stmark2.h > @@ -49,7 +49,6 @@ > #define CONFIG_SYS_MCFRRTC_BASE 0xFC0A8000 > > /* spi not partitions */ > -#define CONFIG_JFFS2_CMDLINE > #define CONFIG_JFFS2_DEV "nor0" > > /* Timer */ > diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt > index a9508448d4..be3a4b3e9a 100644 > --- a/scripts/config_whitelist.txt > +++ b/scripts/config_whitelist.txt > @@ -848,7 +848,6 @@ CONFIG_IRAM_STACK > CONFIG_IRAM_TOP > CONFIG_IRDA_BASE > CONFIG_IS_ENABLED > -CONFIG_JFFS2_CMDLINE > CONFIG_JFFS2_DEV > CONFIG_JFFS2_LZO > CONFIG_JFFS2_NAND > Viele Grüße, Stefan
On Thu, Nov 05, 2020 at 10:15:37AM +0100, Holger Brunck wrote: > This option is obsolete since 2009 and can be removed globally. > > CC: Stefan Roese <sr@denx.de> > Signed-off-by: Holger Brunck <holger.brunck@hitachi-powergrids.com> > Reviewed-by: Stefan Roese <sr@denx.de> Applied to u-boot/master, thanks!
diff --git a/include/configs/ethernut5.h b/include/configs/ethernut5.h index b513b4bc68..ca249d9d2b 100644 --- a/include/configs/ethernut5.h +++ b/include/configs/ethernut5.h @@ -62,7 +62,6 @@ /* JFFS2 */ #ifdef CONFIG_CMD_JFFS2 -#define CONFIG_JFFS2_CMDLINE #define CONFIG_JFFS2_NAND #endif diff --git a/include/configs/km/km-powerpc.h b/include/configs/km/km-powerpc.h index 7bfe12fecb..3be926c103 100644 --- a/include/configs/km/km-powerpc.h +++ b/include/configs/km/km-powerpc.h @@ -9,8 +9,6 @@ /* Do boardspecific init for all boards */ -#define CONFIG_JFFS2_CMDLINE - /* EEprom support 24C08, 24C16, 24C64 */ #define CONFIG_SYS_EEPROM_PAGE_WRITE_ENABLE #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 /* 8 Byte write page */ diff --git a/include/configs/kmp204x.h b/include/configs/kmp204x.h index ec1254e747..d1eb7b574b 100644 --- a/include/configs/kmp204x.h +++ b/include/configs/kmp204x.h @@ -337,9 +337,6 @@ int get_scl(void); * additionnal command line configuration. */ -/* we don't need flash support */ -#undef CONFIG_JFFS2_CMDLINE - /* * For booting Linux, the board info and command line data * have to be in the first 64 MB of memory, since this is diff --git a/include/configs/pm9263.h b/include/configs/pm9263.h index 0ed4b1aaa2..6c882b6ff9 100644 --- a/include/configs/pm9263.h +++ b/include/configs/pm9263.h @@ -190,7 +190,6 @@ #endif -#define CONFIG_JFFS2_CMDLINE 1 #define CONFIG_JFFS2_NAND 1 #define CONFIG_JFFS2_DEV "nand0" /* NAND device jffs2 lives on */ #define CONFIG_JFFS2_PART_OFFSET 0 /* start of jffs2 partition */ diff --git a/include/configs/stmark2.h b/include/configs/stmark2.h index d9a2f75e73..da162cbb11 100644 --- a/include/configs/stmark2.h +++ b/include/configs/stmark2.h @@ -49,7 +49,6 @@ #define CONFIG_SYS_MCFRRTC_BASE 0xFC0A8000 /* spi not partitions */ -#define CONFIG_JFFS2_CMDLINE #define CONFIG_JFFS2_DEV "nor0" /* Timer */ diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt index a9508448d4..be3a4b3e9a 100644 --- a/scripts/config_whitelist.txt +++ b/scripts/config_whitelist.txt @@ -848,7 +848,6 @@ CONFIG_IRAM_STACK CONFIG_IRAM_TOP CONFIG_IRDA_BASE CONFIG_IS_ENABLED -CONFIG_JFFS2_CMDLINE CONFIG_JFFS2_DEV CONFIG_JFFS2_LZO CONFIG_JFFS2_NAND
This option is obsolete since 2009 and can be removed globally. CC: Stefan Roese <sr@denx.de> Signed-off-by: Holger Brunck <holger.brunck@hitachi-powergrids.com> --- include/configs/ethernut5.h | 1 - include/configs/km/km-powerpc.h | 2 -- include/configs/kmp204x.h | 3 --- include/configs/pm9263.h | 1 - include/configs/stmark2.h | 1 - scripts/config_whitelist.txt | 1 - 6 files changed, 9 deletions(-)