diff mbox series

[08/15] arm64: dts: ls208xa: add gpio node

Message ID 20201016091210.6416-8-biwen.li@oss.nxp.com
State Changes Requested
Delegated to: Priyanka Jain
Headers show
Series [01/15] gpio: mpc8xxx_gpio: fix a bug on ls1046ardb | expand

Commit Message

Biwen Li Oct. 16, 2020, 9:12 a.m. UTC
From: Biwen Li <biwen.li@nxp.com>

Add gpio node for SoC LS208xA

Signed-off-by: Biwen Li <biwen.li@nxp.com>
---
 arch/arm/dts/fsl-ls2080a.dtsi | 45 +++++++++++++++++++++++++++++++++++
 1 file changed, 45 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm/dts/fsl-ls2080a.dtsi b/arch/arm/dts/fsl-ls2080a.dtsi
index 6b7bf8eb16..155caf4721 100644
--- a/arch/arm/dts/fsl-ls2080a.dtsi
+++ b/arch/arm/dts/fsl-ls2080a.dtsi
@@ -3,6 +3,7 @@ 
  * Freescale ls2080a SOC common device tree source
  *
  * Copyright 2013-2015 Freescale Semiconductor, Inc.
+ * Copyright 2020 NXP
  */
 
 / {
@@ -119,6 +120,50 @@ 
 		bus-width = <4>;
 	};
 
+	gpio0: gpio@2300000 {
+		compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
+		reg = <0x0 0x2300000 0x0 0x10000>;
+		interrupts = <0 36 0x4>; /* Level high type */
+		gpio-controller;
+		little-endian;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpio1: gpio@2310000 {
+		compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
+		reg = <0x0 0x2310000 0x0 0x10000>;
+		interrupts = <0 36 0x4>; /* Level high type */
+		gpio-controller;
+		little-endian;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpio2: gpio@2320000 {
+		compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
+		reg = <0x0 0x2320000 0x0 0x10000>;
+		interrupts = <0 37 0x4>; /* Level high type */
+		gpio-controller;
+		little-endian;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpio3: gpio@2330000 {
+		compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
+		reg = <0x0 0x2330000 0x0 0x10000>;
+		interrupts = <0 37 0x4>; /* Level high type */
+		gpio-controller;
+		little-endian;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
 	usb0: usb3@3100000 {
 		compatible = "fsl,layerscape-dwc3";
 		reg = <0x0 0x3100000 0x0 0x10000>;