| Message ID | 20200909152426.4.I3df1738f393278eeb2df2ad4fd8543360d3a5597@changeid |
|---|---|
| State | Accepted |
| Delegated to: | Patrick Delaunay |
| Headers | show |
| Series | [1/4] configs: stm32mp1: enable fastboot support of eMMC boot partition | expand |
Hi Patrick On 9/9/20 3:24 PM, Patrick Delaunay wrote: > Enable the fastboot oem command bootbus, used to configure the eMMC > boot behavior, with same format than 'mmc bootbus' > and with parameter: boot_bus_width reset_boot_bus_width boot_mode > > On stm32mp1 boards the expected command is > $> fastboot oem partconf:0 0 0 > > Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> > --- > > configs/stm32mp15_basic_defconfig | 1 + > configs/stm32mp15_trusted_defconfig | 1 + > 2 files changed, 2 insertions(+) > > diff --git a/configs/stm32mp15_basic_defconfig b/configs/stm32mp15_basic_defconfig > index 6cbfbe5274..0115c9b891 100644 > --- a/configs/stm32mp15_basic_defconfig > +++ b/configs/stm32mp15_basic_defconfig > @@ -87,6 +87,7 @@ CONFIG_FASTBOOT_MMC_USER_SUPPORT=y > CONFIG_FASTBOOT_MMC_USER_NAME="mmc1" > CONFIG_FASTBOOT_CMD_OEM_FORMAT=y > CONFIG_FASTBOOT_CMD_OEM_PARTCONF=y > +CONFIG_FASTBOOT_CMD_OEM_BOOTBUS=y > CONFIG_DM_HWSPINLOCK=y > CONFIG_HWSPINLOCK_STM32=y > CONFIG_DM_I2C=y > diff --git a/configs/stm32mp15_trusted_defconfig b/configs/stm32mp15_trusted_defconfig > index cc114896df..470a2f4c35 100644 > --- a/configs/stm32mp15_trusted_defconfig > +++ b/configs/stm32mp15_trusted_defconfig > @@ -67,6 +67,7 @@ CONFIG_FASTBOOT_MMC_USER_SUPPORT=y > CONFIG_FASTBOOT_MMC_USER_NAME="mmc1" > CONFIG_FASTBOOT_CMD_OEM_FORMAT=y > CONFIG_FASTBOOT_CMD_OEM_PARTCONF=y > +CONFIG_FASTBOOT_CMD_OEM_BOOTBUS=y > CONFIG_DM_HWSPINLOCK=y > CONFIG_HWSPINLOCK_STM32=y > CONFIG_DM_I2C=y Reviewed-by: Patrice Chotard <patrice.chotard@st.com> Thanks
Hi, > From: Patrick DELAUNAY <patrick.delaunay@st.com> > Sent: mercredi 9 septembre 2020 15:25 > > Enable the fastboot oem command bootbus, used to configure the eMMC boot > behavior, with same format than 'mmc bootbus' > and with parameter: boot_bus_width reset_boot_bus_width boot_mode > > On stm32mp1 boards the expected command is $> fastboot oem partconf:0 0 0 > > Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> > --- > > configs/stm32mp15_basic_defconfig | 1 + > configs/stm32mp15_trusted_defconfig | 1 + > 2 files changed, 2 insertions(+) > Applied to u-boot-stm/master, thanks! Regards Patrick
diff --git a/configs/stm32mp15_basic_defconfig b/configs/stm32mp15_basic_defconfig index 6cbfbe5274..0115c9b891 100644 --- a/configs/stm32mp15_basic_defconfig +++ b/configs/stm32mp15_basic_defconfig @@ -87,6 +87,7 @@ CONFIG_FASTBOOT_MMC_USER_SUPPORT=y CONFIG_FASTBOOT_MMC_USER_NAME="mmc1" CONFIG_FASTBOOT_CMD_OEM_FORMAT=y CONFIG_FASTBOOT_CMD_OEM_PARTCONF=y +CONFIG_FASTBOOT_CMD_OEM_BOOTBUS=y CONFIG_DM_HWSPINLOCK=y CONFIG_HWSPINLOCK_STM32=y CONFIG_DM_I2C=y diff --git a/configs/stm32mp15_trusted_defconfig b/configs/stm32mp15_trusted_defconfig index cc114896df..470a2f4c35 100644 --- a/configs/stm32mp15_trusted_defconfig +++ b/configs/stm32mp15_trusted_defconfig @@ -67,6 +67,7 @@ CONFIG_FASTBOOT_MMC_USER_SUPPORT=y CONFIG_FASTBOOT_MMC_USER_NAME="mmc1" CONFIG_FASTBOOT_CMD_OEM_FORMAT=y CONFIG_FASTBOOT_CMD_OEM_PARTCONF=y +CONFIG_FASTBOOT_CMD_OEM_BOOTBUS=y CONFIG_DM_HWSPINLOCK=y CONFIG_HWSPINLOCK_STM32=y CONFIG_DM_I2C=y
Enable the fastboot oem command bootbus, used to configure the eMMC boot behavior, with same format than 'mmc bootbus' and with parameter: boot_bus_width reset_boot_bus_width boot_mode On stm32mp1 boards the expected command is $> fastboot oem partconf:0 0 0 Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> --- configs/stm32mp15_basic_defconfig | 1 + configs/stm32mp15_trusted_defconfig | 1 + 2 files changed, 2 insertions(+)