diff --git a/arch/x86/include/asm/acpi/cros_ec/ac.asl b/arch/x86/include/asm/acpi/cros_ec/ac.asl
new file mode 100644
index 00000000000..80e0ebd3ad5
--- /dev/null
+++ b/arch/x86/include/asm/acpi/cros_ec/ac.asl
@@ -0,0 +1,22 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2012 The Chromium OS Authors. All rights reserved.
+ */
+
+// Scope (EC0)
+
+Device (AC)
+{
+	Name (_HID, "ACPI0003")
+	Name (_PCL, Package () { \_SB })
+
+	Method (_PSR)
+	{
+		Return (ACEX)
+	}
+
+	Method (_STA)
+	{
+		Return (0x0F)
+	}
+}
diff --git a/arch/x86/include/asm/acpi/cros_ec/als.asl b/arch/x86/include/asm/acpi/cros_ec/als.asl
new file mode 100644
index 00000000000..f3d40f889c8
--- /dev/null
+++ b/arch/x86/include/asm/acpi/cros_ec/als.asl
@@ -0,0 +1,56 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2014 Google Inc.
+ */
+
+Device (ALS)
+{
+	Name (_HID, "ACPI0008")
+	Name (_UID, 1)
+
+	Method (_STA, 0, NotSerialized)
+	{
+		Return (0xF)
+	}
+
+	/*
+	 * Returns the current ambient light illuminance reading in lux
+	 *
+	 *  0: Reading is below the range of sensitivity of the sensor
+	 * -1: Reading is above the range or sensitivity of the sensor
+	 */
+	Method (_ALI, 0, NotSerialized)
+	{
+		Return (^^ALS0)
+	}
+
+	/*
+	 * Returns a recommended polling frequency in tenths of seconds
+	 *
+	 *  0: No need to poll, async notifications will indicate changes
+	 */
+	Name (_ALP, 10)
+
+	/*
+	 * Returns a package of packages where each tuple consists of a pair
+	 * of integers mapping ambient light illuminance to display brightness.
+	 *
+	 * {<display luminance adjustment>, <ambient light illuminance>}
+	 *
+	 * Ambient light illuminance values are specified in lux.
+	 *
+	 * Display luminance adjustment values are relative percentages where
+	 * 100 is no (0%) display brightness adjustment.  Values <100 indicate
+	 * negative adjustment (dimming) and values >100 indicate positive
+	 * adjustment (brightening).
+	 *
+	 * This is currently unused by the Linux kernel ACPI ALS driver but
+	 * is required by the ACPI specification so just define a basic two
+	 * point response curve.
+	 */
+	Name (_ALR, Package ()
+	{
+		Package () { 70, 30 },    // Min { -30% adjust at 30 lux }
+		Package () { 150, 1000 }  // Max { +50% adjust at 1000 lux }
+	})
+}
diff --git a/arch/x86/include/asm/acpi/cros_ec/battery.asl b/arch/x86/include/asm/acpi/cros_ec/battery.asl
new file mode 100644
index 00000000000..f106088231e
--- /dev/null
+++ b/arch/x86/include/asm/acpi/cros_ec/battery.asl
@@ -0,0 +1,411 @@
+/*/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2011 The Chromium OS Authors. All rights reserved.
+ */
+
+// Scope (EC0)
+
+/* Mutex for EC battery index interface */
+Mutex (BATM, 0)
+
+// Wait for desired battery index to be presented in shared memory
+//   Arg0 = battery index
+//   Returns Zero on success, One on error.
+Method (BTSW, 1)
+{
+#ifdef EC_ENABLE_SECOND_BATTERY_DEVICE
+	If (LEqual (BTIX, Arg0)) {
+		Return (Zero)
+	}
+	If (LGreaterEqual (Arg0, BTCN)) {
+		Return (One)
+	}
+	Store (Arg0, \_SB.PCI0.LPCB.EC0.BTID)
+	Store (5, Local0)      // Timeout 5 msec
+	While (LNotEqual (BTIX, Arg0))
+	{
+		Sleep (1)
+		Decrement (Local0)
+		If (LEqual (Local0, Zero))
+		{
+			Return (One)
+		}
+	}
+#else
+	If (LNotEqual (0, Arg0)) {
+		Return (One)
+	}
+#endif
+	Return (Zero)
+}
+
+// _STA implementation.
+//   Arg0 = battery index
+Method (BSTA, 1, Serialized)
+{
+	If (Acquire (^BATM, 1000)) {
+		Return (Zero)
+	}
+
+	If (And(Not(BTSW (Arg0)), BTEX)) {
+		Store (0x1F, Local0)
+	} Else {
+		Store (0x0F, Local0)
+	}
+
+	Release (^BATM)
+	Return (Local0)
+}
+
+// _BIF implementation.
+//   Arg0 = battery index
+//   Arg1 = PBIF
+Method (BBIF, 2, Serialized)
+{
+	If (Acquire (^BATM, 1000)) {
+		Return (Arg1)
+	}
+
+	If (BTSW (Arg0)) {
+		Release (^BATM)
+		Return (Arg1)
+	}
+	// Last Full Charge Capacity
+	Store (BTDF, Index (Arg1, 2))
+
+	// Design Voltage
+	Store (BTDV, Index (Arg1, 4))
+
+	// Design Capacity
+	Store (BTDA, Local0)
+	Store (Local0, Index (Arg1, 1))
+
+	// Design Capacity of Warning
+	Divide (Multiply (Local0, DWRN), 100, , Local2)
+	Store (Local2, Index (Arg1, 5))
+
+	// Design Capacity of Low
+	Divide (Multiply (Local0, DLOW), 100, , Local2)
+	Store (Local2, Index (Arg1, 6))
+
+	// Get battery info from mainboard
+	Store (ToString(Concatenate(BMOD, 0x00)), Index (Arg1, 9))
+	Store (ToString(Concatenate(BSER, 0x00)), Index (Arg1, 10))
+	Store (ToString(Concatenate(BMFG, 0x00)), Index (Arg1, 12))
+
+	Release (^BATM)
+	Return (Arg1)
+}
+
+// _BIX implementation.
+//   Arg0 = battery index
+//   Arg1 = PBIX
+Method (BBIX, 2, Serialized)
+{
+	If (Acquire (^BATM, 1000)) {
+		Return (Arg1)
+	}
+
+	If (BTSW (Arg0)) {
+		Release (^BATM)
+		Return (Arg1)
+	}
+	// Last Full Charge Capacity
+	Store (BTDF, Index (Arg1, 3))
+
+	// Design Voltage
+	Store (BTDV, Index (Arg1, 5))
+
+	// Design Capacity
+	Store (BTDA, Local0)
+	Store (Local0, Index (Arg1, 2))
+
+	// Design Capacity of Warning
+	Divide (Multiply (Local0, DWRN), 100, , Local2)
+	Store (Local2, Index (Arg1, 6))
+
+	// Design Capacity of Low
+	Divide (Multiply (Local0, DLOW), 100, , Local2)
+	Store (Local2, Index (Arg1, 7))
+
+	// Cycle Count
+	Store (BTCC, Index (Arg1, 8))
+
+	// Get battery info from mainboard
+	Store (ToString(Concatenate(BMOD, 0x00)), Index (Arg1, 16))
+	Store (ToString(Concatenate(BSER, 0x00)), Index (Arg1, 17))
+	Store (ToString(Concatenate(BMFG, 0x00)), Index (Arg1, 19))
+
+	Release (^BATM)
+	Return (Arg1)
+}
+
+// _BST implementation.
+//   Arg0 = battery index
+//   Arg1 = PBST
+//   Arg2 = BSTP
+//   Arg3 = BFWK
+Method (BBST, 4, Serialized)
+{
+	If (Acquire (^BATM, 1000)) {
+		Return (Arg1)
+	}
+
+	If (BTSW (Arg0)) {
+		Release (^BATM)
+		Return (Arg1)
+	}
+	//
+	// 0: BATTERY STATE
+	//
+	// bit 0 = discharging
+	// bit 1 = charging
+	// bit 2 = critical level
+	//
+	Store (Zero, Local1)
+
+	// Check if AC is present
+	If (ACEX) {
+		If (BFCG) {
+			Store (0x02, Local1)
+		} ElseIf (BFDC) {
+			Store (0x01, Local1)
+		}
+	} Else {
+		// Always discharging when on battery power
+		Store (0x01, Local1)
+	}
+
+	// Check for critical battery level
+	If (BFCR) {
+		Or (Local1, 0x04, Local1)
+	}
+	Store (Local1, Index (Arg1, 0))
+
+	// Notify if battery state has changed since last time
+	If (LNotEqual (Local1, DeRefOf (Arg2))) {
+		Store (Local1, Arg2)
+		If (LEqual(Arg0, 0)) {
+			Notify (BAT0, 0x80)
+		}
+#ifdef EC_ENABLE_SECOND_BATTERY_DEVICE
+		Else {
+			Notify (BAT1, 0x80)
+		}
+#endif
+	}
+
+	//
+	// 1: BATTERY PRESENT RATE
+	//
+	Store (BTPR, Index (Arg1, 1))
+
+	//
+	// 2: BATTERY REMAINING CAPACITY
+	//
+	Store (BTRA, Local1)
+	If (LAnd (Arg3, LAnd (ACEX, LNot (LAnd (BFDC, BFCG))))) {
+		// On AC power and battery is neither charging
+		// nor discharging.  Linux expects a full battery
+		// to report same capacity as last full charge.
+		// https://bugzilla.kernel.org/show_bug.cgi?id=12632
+		Store (BTDF, Local2)
+
+		// See if within ~6% of full
+		ShiftRight (Local2, 4, Local3)
+		If (LAnd (LGreater (Local1, Subtract (Local2, Local3)),
+		          LLess (Local1, Add (Local2, Local3))))
+		{
+			Store (Local2, Local1)
+		}
+	}
+	Store (Local1, Index (Arg1, 2))
+
+	//
+	// 3: BATTERY PRESENT VOLTAGE
+	//
+	Store (BTVO, Index (Arg1, 3))
+
+	Release (^BATM)
+	Return (Arg1)
+}
+
+Device (BAT0)
+{
+	Name (_HID, EISAID ("PNP0C0A"))
+	Name (_UID, 1)
+	Name (_PCL, Package () { \_SB })
+
+	Name (PBIF, Package () {
+		0x00000001,  // 0x00: Power Unit: mAh
+		0xFFFFFFFF,  // 0x01: Design Capacity
+		0xFFFFFFFF,  // 0x02: Last Full Charge Capacity
+		0x00000001,  // 0x03: Battery Technology: Rechargeable
+		0xFFFFFFFF,  // 0x04: Design Voltage
+		0x00000003,  // 0x05: Design Capacity of Warning
+		0xFFFFFFFF,  // 0x06: Design Capacity of Low
+		0x00000001,  // 0x07: Capacity Granularity 1
+		0x00000001,  // 0x08: Capacity Granularity 2
+		"",          // 0x09: Model Number
+		"",          // 0x0a: Serial Number
+		"LION",      // 0x0b: Battery Type
+		""           // 0x0c: OEM Information
+	})
+
+	Name (PBIX, Package () {
+		0x00000000,  // 0x00: Revision
+		0x00000001,  // 0x01: Power Unit: mAh
+		0xFFFFFFFF,  // 0x02: Design Capacity
+		0xFFFFFFFF,  // 0x03: Last Full Charge Capacity
+		0x00000001,  // 0x04: Battery Technology: Rechargeable
+		0xFFFFFFFF,  // 0x05: Design Voltage
+		0x00000003,  // 0x06: Design Capacity of Warning
+		0xFFFFFFFF,  // 0x07: Design Capacity of Low
+		0x00000000,  // 0x08: Cycle Count
+		0x00018000,  // 0x09: Measurement Accuracy (98.3%?)
+		0x000001F4,  // 0x0a: Max Sampling Time (500ms)
+		0x0000000a,  // 0x0b: Min Sampling Time (10ms)
+		0xFFFFFFFF,  // 0x0c: Max Averaging Interval
+		0xFFFFFFFF,  // 0x0d: Min Averaging Interval
+		0x00000001,  // 0x0e: Capacity Granularity 1
+		0x00000001,  // 0x0f: Capacity Granularity 2
+		"",          // 0x10 Model Number
+		"",          // 0x11: Serial Number
+		"LION",      // 0x12: Battery Type
+		""           // 0x13: OEM Information
+	})
+
+	Name (PBST, Package () {
+		0x00000000,  // 0x00: Battery State
+		0xFFFFFFFF,  // 0x01: Battery Present Rate
+		0xFFFFFFFF,  // 0x02: Battery Remaining Capacity
+		0xFFFFFFFF,  // 0x03: Battery Present Voltage
+	})
+	Name (BSTP, Zero)
+
+	// Workaround for full battery status, disabled by default
+	Name (BFWK, Zero)
+
+	// Method to enable full battery workaround
+	Method (BFWE)
+	{
+		Store (One, BFWK)
+	}
+
+	// Method to disable full battery workaround
+	Method (BFWD)
+	{
+		Store (Zero, BFWK)
+	}
+
+	Method (_STA, 0, Serialized)
+	{
+		Return (BSTA (0))
+	}
+
+	Method (_BIF, 0, Serialized)
+	{
+		Return (BBIF (0, PBIF))
+	}
+
+	Method (_BIX, 0, Serialized)
+	{
+		Return (BBIX (0, PBIX))
+	}
+
+	Method (_BST, 0, Serialized)
+	{
+		Return (BBST (0, PBST, RefOf (BSTP), BFWK))
+	}
+}
+
+#ifdef EC_ENABLE_SECOND_BATTERY_DEVICE
+Device (BAT1)
+{
+	Name (_HID, EISAID ("PNP0C0A"))
+	Name (_UID, 1)
+	Name (_PCL, Package () { \_SB })
+
+	Name (PBIF, Package () {
+		0x00000001,  // 0x00: Power Unit: mAh
+		0xFFFFFFFF,  // 0x01: Design Capacity
+		0xFFFFFFFF,  // 0x02: Last Full Charge Capacity
+		0x00000001,  // 0x03: Battery Technology: Rechargeable
+		0xFFFFFFFF,  // 0x04: Design Voltage
+		0x00000003,  // 0x05: Design Capacity of Warning
+		0xFFFFFFFF,  // 0x06: Design Capacity of Low
+		0x00000001,  // 0x07: Capacity Granularity 1
+		0x00000001,  // 0x08: Capacity Granularity 2
+		"",          // 0x09: Model Number
+		"",          // 0x0a: Serial Number
+		"LION",      // 0x0b: Battery Type
+		""           // 0x0c: OEM Information
+	})
+
+	Name (PBIX, Package () {
+		0x00000000,  // 0x00: Revision
+		0x00000001,  // 0x01: Power Unit: mAh
+		0xFFFFFFFF,  // 0x02: Design Capacity
+		0xFFFFFFFF,  // 0x03: Last Full Charge Capacity
+		0x00000001,  // 0x04: Battery Technology: Rechargeable
+		0xFFFFFFFF,  // 0x05: Design Voltage
+		0x00000003,  // 0x06: Design Capacity of Warning
+		0xFFFFFFFF,  // 0x07: Design Capacity of Low
+		0x00000000,  // 0x08: Cycle Count
+		0x00018000,  // 0x09: Measurement Accuracy (98.3%?)
+		0x000001F4,  // 0x0a: Max Sampling Time (500ms)
+		0x0000000a,  // 0x0b: Min Sampling Time (10ms)
+		0xFFFFFFFF,  // 0x0c: Max Averaging Interval
+		0xFFFFFFFF,  // 0x0d: Min Averaging Interval
+		0x00000001,  // 0x0e: Capacity Granularity 1
+		0x00000001,  // 0x0f: Capacity Granularity 2
+		"",          // 0x10 Model Number
+		"",          // 0x11: Serial Number
+		"LION",      // 0x12: Battery Type
+		""           // 0x13: OEM Information
+	})
+
+	Name (PBST, Package () {
+		0x00000000,  // 0x00: Battery State
+		0xFFFFFFFF,  // 0x01: Battery Present Rate
+		0xFFFFFFFF,  // 0x02: Battery Remaining Capacity
+		0xFFFFFFFF,  // 0x03: Battery Present Voltage
+	})
+	Name (BSTP, Zero)
+
+	// Workaround for full battery status, disabled by default
+	Name (BFWK, Zero)
+
+	// Method to enable full battery workaround
+	Method (BFWE)
+	{
+		Store (One, BFWK)
+	}
+
+	// Method to disable full battery workaround
+	Method (BFWD)
+	{
+		Store (Zero, BFWK)
+	}
+
+	Method (_STA, 0, Serialized)
+	{
+		Return (BSTA (1))
+	}
+
+	Method (_BIF, 0, Serialized)
+	{
+		Return (BBIF (1, PBIF))
+	}
+
+	Method (_BIX, 0, Serialized)
+	{
+		Return (BBIX (1, PBIX))
+	}
+
+	Method (_BST, 0, Serialized)
+	{
+		Return (BBST (1, PBST, RefOf (BSTP), BFWK))
+	}
+}
+#endif
diff --git a/arch/x86/include/asm/acpi/cros_ec/cros_ec.asl b/arch/x86/include/asm/acpi/cros_ec/cros_ec.asl
new file mode 100644
index 00000000000..9f50185b70f
--- /dev/null
+++ b/arch/x86/include/asm/acpi/cros_ec/cros_ec.asl
@@ -0,0 +1,57 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2016 Google Inc.
+ */
+
+Device (CREC)
+{
+	Name (_HID, "GOOG0004")
+	Name (_UID, 1)
+	Name (_DDN, "EC Command Device")
+#ifdef EC_ENABLE_WAKE_PIN
+	Name (_PRW, Package () { EC_ENABLE_WAKE_PIN, 0x5 })
+#endif
+
+#ifdef EC_ENABLE_SYNC_IRQ
+	Name (_CRS, ResourceTemplate ()
+	{
+		Interrupt (ResourceConsumer, Level, ActiveLow, Exclusive)
+		{
+			EC_SYNC_IRQ
+		}
+	})
+#endif
+
+#ifdef EC_ENABLE_SYNC_IRQ_GPIO
+	Name (_CRS, ResourceTemplate ()
+	{
+		GpioInt (Level, ActiveLow, Exclusive, PullDefault, 0x0000,
+		         "\\_SB.GPIO", 0x00, ResourceConsumer, ,)
+		{
+			EC_SYNC_IRQ
+		}
+	})
+#endif
+
+#ifdef EC_ENABLE_MKBP_DEVICE
+	Device (CKSC)
+	{
+		Name (_HID, "GOOG0007")
+		Name (_UID, 1)
+		Name (_DDN, "EC MKBP Device")
+	}
+#endif
+
+#ifdef EC_ENABLE_CBAS_DEVICE
+	Device (CBAS)
+	{
+		Name (_HID, "GOOG000B")
+		Name (_UID, 1)
+		Name (_DDN, "EC Base Switch Device")
+	}
+#endif
+	Method(_STA, 0)
+	{
+		Return (0xB)
+	}
+}
diff --git a/arch/x86/include/asm/acpi/cros_ec/ec.asl b/arch/x86/include/asm/acpi/cros_ec/ec.asl
new file mode 100644
index 00000000000..03f57f25a29
--- /dev/null
+++ b/arch/x86/include/asm/acpi/cros_ec/ec.asl
@@ -0,0 +1,557 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2012 The Chromium OS Authors. All rights reserved.
+ */
+
+/*
+ * The mainboard must define a PNOT method to handle power
+ * state notifications and Notify CPU device objects to
+ * re-evaluate their _PPC and _CST tables.
+ */
+
+// Mainboard specific throttle handler
+#ifdef DPTF_ENABLE_CHARGER
+External (\_SB.DPTF.TCHG, DeviceObj)
+#endif
+
+
+Device (EC0)
+{
+	Name (_HID, EISAID ("PNP0C09"))
+	Name (_UID, 1)
+	Name (_GPE, EC_SCI_GPI)
+	Name (TOFS, EC_TEMP_SENSOR_OFFSET)
+	Name (TNCA, EC_TEMP_SENSOR_NOT_CALIBRATED)
+	Name (TNOP, EC_TEMP_SENSOR_NOT_POWERED)
+	Name (TBAD, EC_TEMP_SENSOR_ERROR)
+	Name (TNPR, EC_TEMP_SENSOR_NOT_PRESENT)
+	Name (DWRN, 15)		// Battery capacity warning at 15%
+	Name (DLOW, 10)		// Battery capacity low at 10%
+
+	OperationRegion (ERAM, EmbeddedControl, 0x00, EC_ACPI_MEM_MAPPED_BEGIN)
+	Field (ERAM, ByteAcc, Lock, Preserve)
+	{
+		Offset (0x00),
+		RAMV, 8,	// EC RAM Version
+		TSTB, 8,	// Test Byte
+		TSTC, 8,	// Complement of Test Byte
+		KBLV, 8,	// Keyboard Backlight value
+		FAND, 8,	// Set Fan Duty Cycle
+		PATI, 8,	// Programmable Auxiliary Trip Sensor ID
+		PATT, 8,	// Programmable Auxiliary Trip Threshold
+		PATC, 8,	// Programmable Auxiliary Trip Commit
+		CHGL, 8,	// Charger Current Limit
+		TBMD, 1,	// Tablet mode
+		DDPN, 3,	// Device DPTF Profile Number
+		// DFUD must be 0 for the other 31 values to be valid
+		Offset (0x0a),
+		DFUD, 1,	// Device Features Undefined
+		FLSH, 1,	// Flash commands present
+		PFAN, 1,	// PWM Fan control present
+		KBLE, 1,	// Keyboard Backlight present
+		LTBR, 1,	// Lightbar present
+		LEDC, 1,	// LED control
+		MTNS, 1,	// Motion sensors present
+		KEYB, 1,	// EC is keyboard controller
+		PSTR, 1,	// Persistent storage
+		P80P, 1,	// EC serves I/O Port 80h
+		THRM, 1,	// EC supports thermal management
+		SBKL, 1,	// Screen backlight switch present
+		WIFI, 1,	// WIFI switch present
+		HOST, 1,	// EC monitors host events (eg SCI, SMI)
+		GPIO, 1,	// EC provides GPIO commands
+		I2CB, 1,	// EC provides I2C controller access
+		CHRG, 1,	// EC provides commands for charger control
+		BATT, 1,	// Simply Battery support
+		SBAT, 1,	// Smart Battery support
+		HANG, 1,	// EC can detect host hang
+		PMUI, 1,	// Power Information
+		DSEC, 1,	// another EC exists downstream
+		UPDC, 1,	// supports USB Power Delivery
+		UMUX, 1,	// supports USB Mux
+		MSFF, 1,	// Motion Sense has FIFO
+		TVST, 1,	// supports temporary secure vstore
+		TCMV, 1,	// USB Type C Muxing is virtual (host assisted)
+		RTCD, 1,	// EC provides an RTC device
+		FPRD, 1,	// EC provides a fingerprint reader device
+		TPAD, 1,	// EC provides a touchpad device
+		RWSG, 1,	// EC has RWSIG task enabled
+		DEVE, 1,	// EC supports device events
+		// make sure we're within our space envelope
+		Offset (0x0e),
+		Offset (0x12),
+		BTID, 8,	// Battery index that host wants to read
+		USPP, 8,	// USB Port Power
+}
+
+#if IS_ENABLED(CONFIG_EC_GOOGLE_CHROMEEC_ACPI_MEMMAP)
+	OperationRegion (EMEM, EmbeddedControl,
+			 EC_ACPI_MEM_MAPPED_BEGIN, EC_ACPI_MEM_MAPPED_SIZE)
+	Field (EMEM, ByteAcc, Lock, Preserve)
+#else
+	OperationRegion (EMEM, SystemIO, EC_LPC_ADDR_MEMMAP, EC_MEMMAP_SIZE)
+	Field (EMEM, ByteAcc, NoLock, Preserve)
+#endif
+	{
+		#include "emem.asl"
+	}
+
+#ifdef EC_ENABLE_LID_SWITCH
+	/* LID Switch */
+	Device (LID0)
+	{
+		Name (_HID, EisaId ("PNP0C0D"))
+		Method (_LID, 0)
+		{
+			Return (^^LIDS)
+		}
+
+#ifdef EC_ENABLE_WAKE_PIN
+		Name (_PRW, Package () { EC_ENABLE_WAKE_PIN, 0x5 })
+#endif
+	}
+#endif
+
+	Method (TINS, 1, Serialized)
+	{
+		Switch (ToInteger (Arg0))
+		{
+			Case (0) { Return (TIN0) }
+			Case (1) { Return (TIN1) }
+			Case (2) { Return (TIN2) }
+			Case (3) { Return (TIN3) }
+			Case (4) { Return (TIN4) }
+			Case (5) { Return (TIN5) }
+			Case (6) { Return (TIN6) }
+			Case (7) { Return (TIN7) }
+			Case (8) { Return (TIN8) }
+			Case (9) { Return (TIN9) }
+			Default  { Return (TIN0) }
+		}
+	}
+
+	Method (_CRS, 0, Serialized)
+	{
+		Name (ECMD, ResourceTemplate()
+		{
+			IO (Decode16,
+			    EC_LPC_ADDR_ACPI_DATA,
+			    EC_LPC_ADDR_ACPI_DATA,
+			    0, 1)
+			IO (Decode16,
+			    EC_LPC_ADDR_ACPI_CMD,
+			    EC_LPC_ADDR_ACPI_CMD,
+			    0, 1)
+		})
+		Return (ECMD)
+	}
+
+	Method (_REG, 2, NotSerialized)
+	{
+		// Initialize AC power state
+		Store (ACEX, \PWRS)
+
+		// Initialize LID switch state
+		Store (LIDS, \LIDS)
+	}
+
+	/* Read requested temperature and check against EC error values */
+	Method (TSRD, 1, Serialized)
+	{
+		Store (\_SB.PCI0.LPCB.EC0.TINS (Arg0), Local0)
+
+		/* Check for sensor not calibrated */
+		If (LEqual (Local0, \_SB.PCI0.LPCB.EC0.TNCA)) {
+			Return (Zero)
+		}
+
+		/* Check for sensor not present */
+		If (LEqual (Local0, \_SB.PCI0.LPCB.EC0.TNPR)) {
+			Return (Zero)
+		}
+
+		/* Check for sensor not powered */
+		If (LEqual (Local0, \_SB.PCI0.LPCB.EC0.TNOP)) {
+			Return (Zero)
+		}
+
+		/* Check for sensor bad reading */
+		If (LEqual (Local0, \_SB.PCI0.LPCB.EC0.TBAD)) {
+			Return (Zero)
+		}
+
+		/* Adjust by offset to get Kelvin */
+		Add (\_SB.PCI0.LPCB.EC0.TOFS, Local0, Local0)
+
+		/* Convert to 1/10 Kelvin */
+		Multiply (Local0, 10, Local0)
+
+		Return (Local0)
+	}
+
+	// Lid Closed Event
+	Method (_Q01, 0, NotSerialized)
+	{
+		Store ("EC: LID CLOSE", Debug)
+		Store (LIDS, \LIDS)
+#ifdef EC_ENABLE_LID_SWITCH
+		Notify (LID0, 0x80)
+#endif
+	}
+
+	// Lid Open Event
+	Method (_Q02, 0, NotSerialized)
+	{
+		Store ("EC: LID OPEN", Debug)
+		Store (LIDS, \LIDS)
+		Notify (CREC, 0x2)
+#ifdef EC_ENABLE_LID_SWITCH
+		Notify (LID0, 0x80)
+#endif
+	}
+
+	// Power Button
+	Method (_Q03, 0, NotSerialized)
+	{
+		Store ("EC: POWER BUTTON", Debug)
+	}
+
+	// AC Connected
+	Method (_Q04, 0, NotSerialized)
+	{
+		Store ("EC: AC CONNECTED", Debug)
+		Store (ACEX, \PWRS)
+		Notify (AC, 0x80)
+#ifdef DPTF_ENABLE_CHARGER
+		If (CondRefOf (\_SB.DPTF.TCHG)) {
+			Notify (\_SB.DPTF.TCHG, 0x80)
+		}
+#endif
+		\PNOT ()
+	}
+
+	// AC Disconnected
+	Method (_Q05, 0, NotSerialized)
+	{
+		Store ("EC: AC DISCONNECTED", Debug)
+		Store (ACEX, \PWRS)
+		Notify (AC, 0x80)
+#ifdef DPTF_ENABLE_CHARGER
+		If (CondRefOf (\_SB.DPTF.TCHG)) {
+			Notify (\_SB.DPTF.TCHG, 0x80)
+		}
+#endif
+		\PNOT ()
+	}
+
+	// Battery Low Event
+	Method (_Q06, 0, NotSerialized)
+	{
+		Store ("EC: BATTERY LOW", Debug)
+		Notify (BAT0, 0x80)
+	}
+
+	// Battery Critical Event
+	Method (_Q07, 0, NotSerialized)
+	{
+		Store ("EC: BATTERY CRITICAL", Debug)
+		Notify (BAT0, 0x80)
+	}
+
+	// Battery Info Event
+	Method (_Q08, 0, NotSerialized)
+	{
+		Store ("EC: BATTERY INFO", Debug)
+		Notify (BAT0, 0x81)
+#ifdef EC_ENABLE_SECOND_BATTERY_DEVICE
+		If (CondRefOf (BAT1)) {
+			Notify (BAT1, 0x81)
+		}
+#endif
+	}
+
+	// Thermal Overload Event
+	Method (_Q0A, 0, NotSerialized)
+	{
+		Store ("EC: THERMAL OVERLOAD", Debug)
+		Notify (\_TZ, 0x80)
+	}
+
+	// Thermal Event
+	Method (_Q0B, 0, NotSerialized)
+	{
+		Store ("EC: THERMAL", Debug)
+		Notify (\_TZ, 0x80)
+	}
+
+	// USB Charger
+	Method (_Q0C, 0, NotSerialized)
+	{
+		Store ("EC: USB CHARGER", Debug)
+	}
+
+	// Key Pressed
+	Method (_Q0D, 0, NotSerialized)
+	{
+		Store ("EC: KEY PRESSED", Debug)
+		Notify (CREC, 0x2)
+	}
+
+	// Thermal Shutdown Imminent
+	Method (_Q10, 0, NotSerialized)
+	{
+		Store ("EC: THERMAL SHUTDOWN", Debug)
+		Notify (\_TZ, 0x80)
+	}
+
+	// Battery Shutdown Imminent
+	Method (_Q11, 0, NotSerialized)
+	{
+		Store ("EC: BATTERY SHUTDOWN", Debug)
+		Notify (BAT0, 0x80)
+	}
+
+	// Throttle Start
+	Method (_Q12, 0, NotSerialized)
+	{
+#ifdef EC_ENABLE_THROTTLING_HANDLER
+		Store ("EC: THROTTLE START", Debug)
+		\_TZ.THRT (1)
+#endif
+	}
+
+	// Throttle Stop
+	Method (_Q13, 0, NotSerialized)
+	{
+#ifdef EC_ENABLE_THROTTLING_HANDLER
+		Store ("EC: THROTTLE STOP", Debug)
+		\_TZ.THRT (0)
+#endif
+	}
+
+#ifdef EC_ENABLE_PD_MCU_DEVICE
+	// PD event
+	Method (_Q16, 0, NotSerialized)
+	{
+		Store ("EC: GOT PD EVENT", Debug)
+		Notify (ECPD, 0x80)
+	}
+#endif
+
+	// Battery Status
+	Method (_Q17, 0, NotSerialized)
+	{
+		Store ("EC: BATTERY STATUS", Debug)
+		Notify (BAT0, 0x80)
+#ifdef EC_ENABLE_SECOND_BATTERY_DEVICE
+		If (CondRefOf (BAT1)) {
+			Notify (BAT1, 0x80)
+		}
+#endif
+	}
+
+	// MKBP interrupt.
+	Method (_Q1B, 0, NotSerialized)
+	{
+		Store ("EC: MKBP", Debug)
+		Notify (CREC, 0x80)
+	}
+
+	// TABLET mode switch Event
+	Method (_Q1D, 0, NotSerialized)
+	{
+		Store ("EC: TABLET mode switch Event", Debug)
+		Notify (CREC, 0x2)
+#ifdef EC_ENABLE_MULTIPLE_DPTF_PROFILES
+		\_SB.DPTF.TPET()
+#endif
+#ifdef EC_ENABLE_TBMC_DEVICE
+		Notify (TBMC, 0x80)
+#endif
+	}
+
+	/*
+	 * Dynamic Platform Thermal Framework support
+	 */
+
+	/* Mutex for EC PAT interface */
+	Mutex (PATM, 1)
+
+	/*
+	 * Set Aux Trip Point 0
+	 *   Arg0 = Temp Sensor ID
+	 *   Arg1 = Value to set
+	 */
+	Method (PAT0, 2, Serialized)
+	{
+		If (Acquire (^PATM, 1000)) {
+			Return (0)
+		}
+
+		/* Set sensor ID */
+		Store (ToInteger (Arg0), ^PATI)
+
+		/* Temperature is passed in 1/10 Kelvin */
+		Divide (ToInteger (Arg1), 10, , Local1)
+
+		/* Adjust by EC temperature offset */
+		Subtract (Local1, ^TOFS, ^PATT)
+
+		/* Set commit value with SELECT=0 and ENABLE=1 */
+		Store (0x02, ^PATC)
+
+		Release (^PATM)
+		Return (1)
+	}
+
+	/*
+	 * Set Aux Trip Point 1
+	 *   Arg0 = Temp Sensor ID
+	 *   Arg1 = Value to set
+	 */
+	Method (PAT1, 2, Serialized)
+	{
+		If (Acquire (^PATM, 1000)) {
+			Return (0)
+		}
+
+		/* Set sensor ID */
+		Store (ToInteger (Arg0), ^PATI)
+
+		/* Temperature is passed in 1/10 Kelvin */
+		Divide (ToInteger (Arg1), 10, , Local1)
+
+		/* Adjust by EC temperature offset */
+		Subtract (Local1, ^TOFS, ^PATT)
+
+		/* Set commit value with SELECT=1 and ENABLE=1 */
+		Store (0x03, ^PATC)
+
+		Release (^PATM)
+		Return (1)
+	}
+
+	/* Disable Aux Trip Points
+	 *   Arg0 = Temp Sensor ID
+	 */
+	Method (PATD, 1, Serialized)
+	{
+		If (Acquire (^PATM, 1000)) {
+			Return (0)
+		}
+
+		Store (ToInteger (Arg0), ^PATI)
+		Store (0x00, ^PATT)
+
+		/* Disable PAT0 */
+		Store (0x00, ^PATC)
+
+		/* Disable PAT1 */
+		Store (0x01, ^PATC)
+
+		Release (^PATM)
+		Return (1)
+	}
+
+	/*
+	 * Thermal Threshold Event
+	 */
+	Method (_Q09, 0, NotSerialized)
+	{
+		If (LNot(Acquire (^PATM, 1000))) {
+			/* Read sensor ID for event */
+			Store (^PATI, Local0)
+
+			/* When sensor ID returns 0xFF then no more events */
+			While (LNotEqual (Local0, EC_TEMP_SENSOR_NOT_PRESENT))
+			{
+#ifdef HAVE_THERM_EVENT_HANDLER
+				\_SB.DPTF.TEVT (Local0)
+#endif
+
+				/* Keep reaading sensor ID for event */
+				Store (^PATI, Local0)
+			}
+
+			Release (^PATM)
+		}
+	}
+
+	/*
+	 * Set Charger Current Limit
+	 *   Arg0 = Current Limit in 64mA steps
+	 */
+	Method (CHGS, 1, Serialized)
+	{
+		Store (ToInteger (Arg0), ^CHGL)
+	}
+
+	/*
+	 * Disable Charger Current Limit
+	 */
+	Method (CHGD, 0, Serialized)
+	{
+		Store (0xFF, ^CHGL)
+	}
+
+	/* Read current Tablet mode */
+	Method (RCTM, 0, NotSerialized)
+	{
+		Return (^TBMD)
+	}
+
+	/* Read current Device DPTF Profile Number */
+	Method (RCDP, 0, NotSerialized)
+	{
+		/*
+		 * DDPN = 0 is reserved for backwards compatibility.
+		 * If DDPN == 0 use TBMD to load appropriate DPTF table.
+		 */
+		If (LEqual (^DDPN, 0)) {
+			Return (^TBMD)
+		} Else {
+			Subtract (^DDPN, 1, Local0)
+			Return (Local0)
+		}
+	}
+
+#if IS_ENABLED(CONFIG_EC_GOOGLE_CHROMEEC_ACPI_USB_PORT_POWER)
+	/*
+	 * Enable USB Port Power
+	 *   Arg0 = USB port ID
+	 */
+	Method (UPPS, 1, Serialized)
+	{
+		Or (USPP, ShiftLeft (1, Arg0), USPP)
+	}
+
+	/*
+	 * Disable USB Port Power
+	 *   Arg0 = USB port ID
+	 */
+	Method (UPPC, 1, Serialized)
+	{
+		And (USPP, Not (ShiftLeft (1, Arg0)), USPP)
+	}
+#endif
+
+	#include "ac.asl"
+	#include "battery.asl"
+	#include "cros_ec.asl"
+
+#ifdef EC_ENABLE_ALS_DEVICE
+	#include "als.asl"
+#endif
+
+#ifdef EC_ENABLE_KEYBOARD_BACKLIGHT
+	#include "keyboard_backlight.asl"
+#endif
+
+#ifdef EC_ENABLE_PD_MCU_DEVICE
+	#include "pd.asl"
+#endif
+
+#ifdef EC_ENABLE_TBMC_DEVICE
+	#include "tbmc.asl"
+#endif
+}
diff --git a/arch/x86/include/asm/acpi/cros_ec/emem.asl b/arch/x86/include/asm/acpi/cros_ec/emem.asl
new file mode 100644
index 00000000000..681ca1c9ded
--- /dev/null
+++ b/arch/x86/include/asm/acpi/cros_ec/emem.asl
@@ -0,0 +1,53 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2015 The Chromium OS Authors. All rights reserved.
+ */
+
+/*
+ * EMEM data may be accessed through port 62/66 or through LPC at 900h.
+ */
+
+Offset (0x00),
+TIN0, 8,	// Temperature 0
+TIN1, 8,	// Temperature 1
+TIN2, 8,	// Temperature 2
+TIN3, 8,	// Temperature 3
+TIN4, 8,	// Temperature 4
+TIN5, 8,	// Temperature 5
+TIN6, 8,	// Temperature 6
+TIN7, 8,	// Temperature 7
+TIN8, 8,	// Temperature 8
+TIN9, 8,	// Temperature 9
+Offset (0x10),
+FAN0, 16,	// Fan Speed 0
+Offset (0x24),
+BTVR, 8,	// Battery structure version
+Offset (0x30),
+LIDS, 1,	// Lid Switch State
+PBTN, 1,	// Power Button Pressed
+WPDI, 1,	// Write Protect Disabled
+RECK, 1,	// Keyboard Initiated Recovery
+RECD, 1,	// Dedicated Recovery Mode
+Offset (0x40),
+BTVO, 32,	// Battery Present Voltage
+BTPR, 32,	// Battery Present Rate
+BTRA, 32,	// Battery Remaining Capacity
+ACEX, 1,	// AC Present
+BTEX, 1,	// Battery Present
+BFDC, 1,	// Battery Discharging
+BFCG, 1,	// Battery Charging
+BFCR, 1,	// Battery Level Critical
+Offset (0x4d),
+BTCN, 8,	// Battery Count
+BTIX, 8,	// Battery index
+Offset (0x50),
+BTDA, 32,	// Battery Design Capacity
+BTDV, 32,	// Battery Design Voltage
+BTDF, 32,	// Battery Last Full Charge Capacity
+BTCC, 32,	// Battery Cycle Count
+BMFG, 64,	// Battery Manufacturer String
+BMOD, 64,	// Battery Model String
+BSER, 64,	// Battery Serial String
+BTYP, 64,	// Battery Type String
+Offset (0x80),
+ALS0, 16,	// ALS reading 0 in lux
diff --git a/arch/x86/include/asm/acpi/cros_ec/keyboard_backlight.asl b/arch/x86/include/asm/acpi/cros_ec/keyboard_backlight.asl
new file mode 100644
index 00000000000..e6edd9680c2
--- /dev/null
+++ b/arch/x86/include/asm/acpi/cros_ec/keyboard_backlight.asl
@@ -0,0 +1,52 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2015 Google Inc.
+ */
+
+Scope (\_SB)
+{
+	/*
+	 * Chrome EC Keyboard Backlight interface
+	 */
+	Device (KBLT)
+	{
+		Name (_HID, "GOOG0002")
+		Name (_UID, 1)
+
+		/* Ask EC if we even have a backlight
+		 * Return 0xf (present, enabled, show in UI, functioning) or 0
+		 *
+		 * With older EC codebases that don't support the Device
+		 * Features bitfield, this reports the keyboard backlight as
+		 * enabled since reads to undefined addresses in EC address
+		 * space return 0xff and so KBLE will be 1.
+		 */
+		Method (_STA, 0, NotSerialized)
+		{
+			/* If query is unsupported, but this code is compiled
+			 * in, assume the backlight exists physically.
+			 */
+			If (LEqual (1, \_SB.PCI0.LPCB.EC0.DFUD)) {
+				Return (0xf)
+			}
+			/* If EC reports that backlight exists, trust it */
+			If (LEqual (1, \_SB.PCI0.LPCB.EC0.KBLE)) {
+				Return (0xf)
+			}
+			/* Otherwise: no device -> disable */
+			Return (0)
+		}
+
+		/* Read current backlight value */
+		Method (KBQC, 0, NotSerialized)
+		{
+			Return (\_SB.PCI0.LPCB.EC0.KBLV)
+		}
+
+		/* Write new backlight value */
+		Method (KBCM, 1, NotSerialized)
+		{
+			Store (Arg0, \_SB.PCI0.LPCB.EC0.KBLV)
+		}
+	}
+}
diff --git a/arch/x86/include/asm/acpi/cros_ec/pd.asl b/arch/x86/include/asm/acpi/cros_ec/pd.asl
new file mode 100644
index 00000000000..e55fde347c2
--- /dev/null
+++ b/arch/x86/include/asm/acpi/cros_ec/pd.asl
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2014 Google Inc.
+ */
+
+Device (ECPD)
+{
+	Name (_HID, "GOOG0003")
+	Name (_UID, 1)
+	Name (_DDN, "EC PD Device")
+	Method(_STA, 0)
+	{
+		Return (0xB)
+	}
+}
diff --git a/arch/x86/include/asm/acpi/cros_ec/superio.asl b/arch/x86/include/asm/acpi/cros_ec/superio.asl
new file mode 100644
index 00000000000..7ddab1e3cf1
--- /dev/null
+++ b/arch/x86/include/asm/acpi/cros_ec/superio.asl
@@ -0,0 +1,159 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2012 The ChromiumOS Authors.  All rights reserved.
+ */
+
+/*
+ * Chrome OS Embedded Controller interface
+ *
+ * Constants that should be defined:
+ *
+ * SIO_EC_MEMMAP_ENABLE     : Enable EC LPC memory map resources
+ * EC_LPC_ADDR_MEMMAP       : Base address of memory map range
+ * EC_MEMMAP_SIZE           : Size of memory map range
+ *
+ * SIO_EC_HOST_ENABLE       : Enable EC host command interface resources
+ * EC_LPC_ADDR_HOST_DATA    : EC host command interface data port
+ * EC_LPC_ADDR_HOST_CMD     : EC host command interface command port
+ * EC_HOST_CMD_REGION0      : EC host command buffer
+ * EC_HOST_CMD_REGION1      : EC host command buffer
+ * EC_HOST_CMD_REGION_SIZE  : EC host command buffer size
+ */
+
+// Scope is \_SB.PCI0.LPCB
+
+Device (SIO) {
+	Name (_UID, 0)
+	Name (_ADR, 0)
+
+#ifdef SIO_EC_MEMMAP_ENABLE
+	Device (ECMM) {
+		Name (_HID, EISAID ("PNP0C02"))
+		Name (_UID, 4)
+
+		Method (_STA, 0, NotSerialized) {
+			Return (0x0F)
+		}
+
+		Name (_CRS, ResourceTemplate ()
+		{
+			IO (Decode16, EC_LPC_ADDR_MEMMAP, EC_LPC_ADDR_MEMMAP,
+			    0x08, EC_MEMMAP_SIZE)
+		})
+
+		Name (_PRS, ResourceTemplate ()
+		{
+			IO (Decode16, EC_LPC_ADDR_MEMMAP, EC_LPC_ADDR_MEMMAP,
+			    0x08, EC_MEMMAP_SIZE)
+		})
+	}
+#endif
+
+#ifdef SIO_EC_HOST_ENABLE
+	Device (ECUI) {
+		Name (_HID, EISAID ("PNP0C02"))
+		Name (_UID, 3)
+
+		Method (_STA, 0, NotSerialized) {
+			Return (0x0F)
+		}
+
+		Name (_CRS, ResourceTemplate ()
+		{
+			IO (Decode16,
+			    EC_LPC_ADDR_HOST_DATA, EC_LPC_ADDR_HOST_DATA,
+			    0x01, 0x01)
+			IO (Decode16,
+			    EC_LPC_ADDR_HOST_CMD, EC_LPC_ADDR_HOST_CMD,
+			    0x01, 0x01)
+			IO (Decode16,
+			    EC_HOST_CMD_REGION0, EC_HOST_CMD_REGION0, 0x08,
+			    EC_HOST_CMD_REGION_SIZE)
+			IO (Decode16,
+			    EC_HOST_CMD_REGION1, EC_HOST_CMD_REGION1, 0x08,
+			    EC_HOST_CMD_REGION_SIZE)
+		})
+
+		Name (_PRS, ResourceTemplate ()
+		{
+			StartDependentFn (0, 0) {
+				IO (Decode16, EC_LPC_ADDR_HOST_DATA,
+				    EC_LPC_ADDR_HOST_DATA, 0x01, 0x01)
+				IO (Decode16, EC_LPC_ADDR_HOST_CMD,
+				    EC_LPC_ADDR_HOST_CMD, 0x01, 0x01)
+				IO (Decode16,
+				    EC_HOST_CMD_REGION0, EC_HOST_CMD_REGION0,
+				    0x08, EC_HOST_CMD_REGION_SIZE)
+				IO (Decode16,
+				    EC_HOST_CMD_REGION1, EC_HOST_CMD_REGION1,
+				    0x08, EC_HOST_CMD_REGION_SIZE)
+			}
+			EndDependentFn ()
+		})
+	}
+#endif
+
+#ifdef SIO_EC_ENABLE_COM1
+	Device (COM1) {
+		Name (_HID, EISAID ("PNP0501"))
+		Name (_UID, 1)
+
+		Method (_STA, 0, NotSerialized) {
+			Return (0x0F)
+		}
+
+		Name (_CRS, ResourceTemplate ()
+		{
+			IO (Decode16, 0x03F8, 0x3F8, 0x08, 0x08)
+			IRQNoFlags () {4}
+		})
+
+		Name (_PRS, ResourceTemplate ()
+		{
+			StartDependentFn (0, 0) {
+				IO (Decode16, 0x03F8, 0x3F8, 0x08, 0x08)
+				IRQNoFlags () {4}
+			}
+			EndDependentFn ()
+		})
+	}
+#endif
+}
+
+#ifdef SIO_EC_ENABLE_PS2K
+Device (PS2K)		// Keyboard
+{
+	Name (_UID, 0)
+	Name (_HID, "GOOG000A")
+	Name (_CID, Package() { EISAID("PNP0303"), EISAID("PNP030B") } )
+
+	Method (_STA, 0, NotSerialized) {
+		Return (0x0F)
+	}
+
+	Name (_CRS, ResourceTemplate()
+	{
+		IO (Decode16, 0x60, 0x60, 0x01, 0x01)
+		IO (Decode16, 0x64, 0x64, 0x01, 0x01)
+#ifdef SIO_EC_PS2K_IRQ
+		SIO_EC_PS2K_IRQ
+#else
+		IRQ (Edge, ActiveHigh, Exclusive) {1}
+#endif
+	})
+
+	Name (_PRS, ResourceTemplate()
+	{
+		StartDependentFn (0, 0) {
+			IO (Decode16, 0x60, 0x60, 0x01, 0x01)
+			IO (Decode16, 0x64, 0x64, 0x01, 0x01)
+#ifdef SIO_EC_PS2K_IRQ
+			SIO_EC_PS2K_IRQ
+#else
+			IRQ (Edge, ActiveHigh, Exclusive) {1}
+#endif
+		}
+		EndDependentFn ()
+	})
+}
+#endif
diff --git a/arch/x86/include/asm/acpi/cros_ec/tbmc.asl b/arch/x86/include/asm/acpi/cros_ec/tbmc.asl
new file mode 100644
index 00000000000..bfe38d668ed
--- /dev/null
+++ b/arch/x86/include/asm/acpi/cros_ec/tbmc.asl
@@ -0,0 +1,23 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2017 Google Inc.
+ */
+
+Device (TBMC)
+{
+	Name (_HID, "GOOG0006")
+	Name (_UID, 1)
+	Name (_DDN, "Tablet Motion Control")
+	Method (TBMC)
+	{
+		If (LEqual (^^RCTM, One)) {
+			Return (0x1)
+		} Else {
+			Return (0x0)
+		}
+	}
+	Method(_STA, 0)
+	{
+		Return (0xB)
+	}
+}
