Message ID | 20200728103744.11626-1-wig.cheng@technexion.com |
---|---|
State | Accepted |
Commit | 3e980a2d8bd13d0d1c2d5cec9e57a47b6cff8b92 |
Delegated to: | Stefano Babic |
Headers | show |
Series | [v1] configs: pico-imx6: convert ethernet function to DM_ETH | expand |
HI Wig, On Tue, Jul 28, 2020 at 7:37 AM <wig.cheng@technexion.com> wrote: > > From: Wig Cheng <wig.cheng@technexion.com> > > Before enable _DM_ETH: > Net: FEC [PRIME] > > After enable DM_ETH: > Net: eth0: ethernet@2188000 > > Here is the test commands: > => dhcp > BOOTP broadcast 1 > DHCP client bound to address 10.88.88.152 (146 ms) > *** ERROR: `serverip' not set > Cannot autoload with TFTPGET > => ping 8.8.8.8 > Using ethernet@2188000 device > host 8.8.8.8 is alive > > Signed-off-by: Wig Cheng <wig.cheng@technexion.com> > --- > configs/pico-imx6_defconfig | 3 +++ > 1 file changed, 3 insertions(+) > > diff --git a/configs/pico-imx6_defconfig b/configs/pico-imx6_defconfig > index 04c132b474..5fe2850086 100644 > --- a/configs/pico-imx6_defconfig > +++ b/configs/pico-imx6_defconfig > @@ -64,6 +64,9 @@ CONFIG_DM_MMC=y > CONFIG_FSL_USDHC=y > CONFIG_PHYLIB=y > CONFIG_PHY_ATHEROS=y > +CONFIG_DM_ETH=y > +CONFIG_DM_MDIO=y mx6 has only a single FEC instance, so there is no need for selecting DM_MDIO. Please see this patch I have recently submitted: https://gitlab.denx.de/u-boot/custodians/u-boot-imx/-/commit/45032991194239991726cafe4dfa6a72ddf45956 Other than that your patch looks good.
diff --git a/configs/pico-imx6_defconfig b/configs/pico-imx6_defconfig index 04c132b474..5fe2850086 100644 --- a/configs/pico-imx6_defconfig +++ b/configs/pico-imx6_defconfig @@ -64,6 +64,9 @@ CONFIG_DM_MMC=y CONFIG_FSL_USDHC=y CONFIG_PHYLIB=y CONFIG_PHY_ATHEROS=y +CONFIG_DM_ETH=y +CONFIG_DM_MDIO=y +CONFIG_RGMII=y CONFIG_PINCTRL=y CONFIG_PINCTRL_IMX6=y CONFIG_MXC_UART=y