diff mbox series

[v3,10/17] board_f: m68k: Factor out m68k-specific bdinfo setup

Message ID 20200720141407.30241-10-ovidiu.panait@windriver.com
State Superseded
Delegated to: Tom Rini
Headers show
Series [v3,01/17] Kconfig: Introduce CONFIG_SYS_HAS_SRAM | expand

Commit Message

Ovidiu Panait July 20, 2020, 2:14 p.m. UTC 
Factor out m68k-specific bdinfo setup to arch_setup_bdinfo in
arch/m68k/lib/bdinfo.c. Also, use if(IS_ENABLED()) instead of #ifdef where
possible.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
---

 arch/m68k/lib/bdinfo.c | 21 +++++++++++++++++++++
 common/board_f.c       | 19 ++++---------------
 2 files changed, 25 insertions(+), 15 deletions(-)

Comments

Simon Glass July 21, 2020, 2:17 p.m. UTC | #1 
On Mon, 20 Jul 2020 at 08:20, Ovidiu Panait <ovidiu.panait@windriver.com> wrote:
>
> Factor out m68k-specific bdinfo setup to arch_setup_bdinfo in
> arch/m68k/lib/bdinfo.c. Also, use if(IS_ENABLED()) instead of #ifdef where
> possible.
>
> Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
> ---
>
>  arch/m68k/lib/bdinfo.c | 21 +++++++++++++++++++++
>  common/board_f.c       | 19 ++++---------------
>  2 files changed, 25 insertions(+), 15 deletions(-)

Reviewed-by: Simon Glass <sjg@chromium.org>
diff mbox series

Patch

diff --git a/arch/m68k/lib/bdinfo.c b/arch/m68k/lib/bdinfo.c
index b7bc6a3044..404e5f19ed 100644
--- a/arch/m68k/lib/bdinfo.c
+++ b/arch/m68k/lib/bdinfo.c
@@ -11,6 +11,27 @@ 
 
 DECLARE_GLOBAL_DATA_PTR;
 
+int arch_setup_bdinfo(void)
+{
+	struct bd_info *bd = gd->bd;
+
+	bd->bi_mbar_base = CONFIG_SYS_MBAR; /* base of internal registers */
+
+	bd->bi_intfreq = gd->cpu_clk;	/* Internal Freq, in Hz */
+	bd->bi_busfreq = gd->bus_clk;	/* Bus Freq,      in Hz */
+
+	if (IS_ENABLED(CONFIG_PCI))
+		bd->bi_pcifreq = gd->pci_clk;
+
+#if defined(CONFIG_EXTRA_CLOCK)
+	bd->bi_inpfreq = gd->arch.inp_clk;	/* input Freq in Hz */
+	bd->bi_vcofreq = gd->arch.vco_clk;	/* vco Freq in Hz */
+	bd->bi_flbfreq = gd->arch.flb_clk;	/* flexbus Freq in Hz */
+#endif
+
+	return 0;
+}
+
 void arch_print_bdinfo(void)
 {
 	struct bd_info *bd = gd->bd;
diff --git a/common/board_f.c b/common/board_f.c
index 1befab5446..8ab76a5c7a 100644
--- a/common/board_f.c
+++ b/common/board_f.c
@@ -630,7 +630,7 @@  int setup_bdinfo(void)
 	return arch_setup_bdinfo();
 }
 
-#if defined(CONFIG_M68K) || defined(CONFIG_MIPS) || defined(CONFIG_PPC) || \
+#if defined(CONFIG_MIPS) || defined(CONFIG_PPC) || \
 	defined(CONFIG_SH)
 static int setup_board_part1(void)
 {
@@ -639,9 +639,6 @@  static int setup_board_part1(void)
 #if defined(CONFIG_E500) || defined(CONFIG_MPC86xx)
 	bd->bi_immr_base = CONFIG_SYS_IMMR;	/* base  of IMMR register     */
 #endif
-#if defined(CONFIG_M68K)
-	bd->bi_mbar_base = CONFIG_SYS_MBAR;	/* base of internal registers */
-#endif
 #if defined(CONFIG_MPC83xx)
 	bd->bi_immrbar = CONFIG_SYS_IMMR;
 #endif
@@ -650,7 +647,7 @@  static int setup_board_part1(void)
 }
 #endif
 
-#if defined(CONFIG_PPC) || defined(CONFIG_M68K)
+#if defined(CONFIG_PPC)
 static int setup_board_part2(void)
 {
 	struct bd_info *bd = gd->bd;
@@ -663,14 +660,6 @@  static int setup_board_part2(void)
 	bd->bi_sccfreq = gd->arch.scc_clk;
 	bd->bi_vco = gd->arch.vco_out;
 #endif /* CONFIG_CPM2 */
-#if defined(CONFIG_M68K) && defined(CONFIG_PCI)
-	bd->bi_pcifreq = gd->pci_clk;
-#endif
-#if defined(CONFIG_EXTRA_CLOCK)
-	bd->bi_inpfreq = gd->arch.inp_clk;	/* input Freq in Hz */
-	bd->bi_vcofreq = gd->arch.vco_clk;	/* vco Freq in Hz */
-	bd->bi_flbfreq = gd->arch.flb_clk;	/* flexbus Freq in Hz */
-#endif
 
 	return 0;
 }
@@ -997,11 +986,11 @@  static const init_fnc_t init_sequence_f[] = {
 	dram_init_banksize,
 	show_dram_config,
 	setup_bdinfo,
-#if defined(CONFIG_M68K) || defined(CONFIG_MIPS) || defined(CONFIG_PPC) || \
+#if defined(CONFIG_MIPS) || defined(CONFIG_PPC) || \
 	defined(CONFIG_SH)
 	setup_board_part1,
 #endif
-#if defined(CONFIG_PPC) || defined(CONFIG_M68K)
+#if defined(CONFIG_PPC)
 	INIT_FUNC_WATCHDOG_RESET
 	setup_board_part2,
 #endif